static const char timeout_msg[] = "*** timeout at %s:%s (line %d) ***\n";
#define TIMEOUT_MSG(lineno) \
- printk(timeout_msg, filename,__FUNCTION__,(lineno))
+ printk(timeout_msg, filename,__func__,(lineno))
static const char invalid_pcb_msg[] =
"*** invalid pcb length %d at %s:%s (line %d) ***\n";
#define INVALID_PCB_MSG(len) \
- printk(invalid_pcb_msg, (len),filename,__FUNCTION__,__LINE__)
+ printk(invalid_pcb_msg, (len),filename,__func__,__LINE__)
static char search_msg[] __initdata = KERN_INFO "%s: Looking for 3c505 adapter at address %#x...";
static inline void outb_control(unsigned char val, struct net_device *dev)
{
outb(val, dev->base_addr + PORT_CONTROL);
- ((elp_device *)(dev->priv))->hcr_val = val;
+ ((elp_device *)(netdev_priv(dev)))->hcr_val = val;
}
-#define HCR_VAL(x) (((elp_device *)((x)->priv))->hcr_val)
+#define HCR_VAL(x) (((elp_device *)(netdev_priv(x)))->hcr_val)
static inline void outb_command(unsigned char val, unsigned int base_addr)
{
static inline void set_hsf(struct net_device *dev, int hsf)
{
- elp_device *adapter = dev->priv;
+ elp_device *adapter = netdev_priv(dev);
unsigned long flags;
spin_lock_irqsave(&adapter->lock, flags);
static inline void adapter_reset(struct net_device *dev)
{
unsigned long timeout;
- elp_device *adapter = dev->priv;
+ elp_device *adapter = netdev_priv(dev);
unsigned char orig_hcr = adapter->hcr_val;
outb_control(0, dev);
*/
static inline void check_3c505_dma(struct net_device *dev)
{
- elp_device *adapter = dev->priv;
+ elp_device *adapter = netdev_priv(dev);
if (adapter->dmaing && time_after(jiffies, adapter->current_dma.start_time + 10)) {
unsigned long flags, f;
printk(KERN_ERR "%s: DMA %s timed out, %d bytes left\n", dev->name, adapter->current_dma.direction ? "download" : "upload", get_dma_residue(dev->dma));
/* Check to see if the receiver needs restarting, and kick it if so */
static inline void prime_rx(struct net_device *dev)
{
- elp_device *adapter = dev->priv;
+ elp_device *adapter = netdev_priv(dev);
while (adapter->rx_active < ELP_RX_PCBS && netif_running(dev)) {
if (!start_receive(dev, &adapter->itx_pcb))
break;
{
int i;
unsigned long timeout;
- elp_device *adapter = dev->priv;
+ elp_device *adapter = netdev_priv(dev);
unsigned long flags;
check_3c505_dma(dev);
unsigned long timeout;
unsigned long flags;
- elp_device *adapter = dev->priv;
+ elp_device *adapter = netdev_priv(dev);
set_hsf(dev, 0);
}
/* read the data */
spin_lock_irqsave(&adapter->lock, flags);
- i = 0;
- do {
- j = 0;
- while (((stat = get_status(dev->base_addr)) & ACRF) == 0 && j++ < 20000);
- pcb->data.raw[i++] = inb_command(dev->base_addr);
- if (i > MAX_PCB_DATA)
- INVALID_PCB_MSG(i);
- } while ((stat & ASF_PCB_MASK) != ASF_PCB_END && j < 20000);
+ for (i = 0; i < MAX_PCB_DATA; i++) {
+ for (j = 0; j < 20000; j++) {
+ stat = get_status(dev->base_addr);
+ if (stat & ACRF)
+ break;
+ }
+ pcb->data.raw[i] = inb_command(dev->base_addr);
+ if ((stat & ASF_PCB_MASK) == ASF_PCB_END || j >= 20000)
+ break;
+ }
spin_unlock_irqrestore(&adapter->lock, flags);
+ if (i >= MAX_PCB_DATA) {
+ INVALID_PCB_MSG(i);
+ return false;
+ }
if (j >= 20000) {
TIMEOUT_MSG(__LINE__);
return false;
}
- /* woops, the last "data" byte was really the length! */
- total_length = pcb->data.raw[--i];
+ /* the last "data" byte was really the length! */
+ total_length = pcb->data.raw[i];
/* safety check total length vs data length */
if (total_length != (pcb->length + 2)) {
static bool start_receive(struct net_device *dev, pcb_struct * tx_pcb)
{
bool status;
- elp_device *adapter = dev->priv;
+ elp_device *adapter = netdev_priv(dev);
if (elp_debug >= 3)
printk(KERN_DEBUG "%s: restarting receiver\n", dev->name);
static void receive_packet(struct net_device *dev, int len)
{
int rlen;
- elp_device *adapter = dev->priv;
+ elp_device *adapter = netdev_priv(dev);
void *target;
struct sk_buff *skb;
unsigned long flags;
int len;
int dlen;
int icount = 0;
- struct net_device *dev;
- elp_device *adapter;
+ struct net_device *dev = dev_id;
+ elp_device *adapter = netdev_priv(dev);
unsigned long timeout;
- dev = dev_id;
- adapter = (elp_device *) dev->priv;
-
spin_lock(&adapter->lock);
do {
skb->protocol = eth_type_trans(skb,dev);
dev->stats.rx_bytes += skb->len;
netif_rx(skb);
- dev->last_rx = jiffies;
}
}
adapter->dmaing = 0;
static int elp_open(struct net_device *dev)
{
- elp_device *adapter;
+ elp_device *adapter = netdev_priv(dev);
int retval;
- adapter = dev->priv;
-
if (elp_debug >= 3)
printk(KERN_DEBUG "%s: request to open device\n", dev->name);
static bool send_packet(struct net_device *dev, struct sk_buff *skb)
{
- elp_device *adapter = dev->priv;
+ elp_device *adapter = netdev_priv(dev);
unsigned long target;
unsigned long flags;
static int elp_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
unsigned long flags;
- elp_device *adapter = dev->priv;
+ elp_device *adapter = netdev_priv(dev);
spin_lock_irqsave(&adapter->lock, flags);
check_3c505_dma(dev);
static struct net_device_stats *elp_get_stats(struct net_device *dev)
{
- elp_device *adapter = (elp_device *) dev->priv;
+ elp_device *adapter = netdev_priv(dev);
if (elp_debug >= 3)
printk(KERN_DEBUG "%s: request for stats\n", dev->name);
static int elp_close(struct net_device *dev)
{
- elp_device *adapter;
-
- adapter = dev->priv;
+ elp_device *adapter = netdev_priv(dev);
if (elp_debug >= 3)
printk(KERN_DEBUG "%s: request to close device\n", dev->name);
static void elp_set_mc_list(struct net_device *dev)
{
- elp_device *adapter = (elp_device *) dev->priv;
+ elp_device *adapter = netdev_priv(dev);
struct dev_mc_list *dmi = dev->mc_list;
int i;
unsigned long flags;
return 0; /* Because of this, the layer above will return -ENODEV */
}
+static const struct net_device_ops elp_netdev_ops = {
+ .ndo_open = elp_open,
+ .ndo_stop = elp_close,
+ .ndo_get_stats = elp_get_stats,
+ .ndo_start_xmit = elp_start_xmit,
+ .ndo_tx_timeout = elp_timeout,
+ .ndo_set_multicast_list = elp_set_mc_list,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
+};
/******************************************************
*
static int __init elplus_setup(struct net_device *dev)
{
- elp_device *adapter = dev->priv;
+ elp_device *adapter = netdev_priv(dev);
int i, tries, tries1, okay;
unsigned long timeout;
unsigned long cookie = 0;
int err = -ENODEV;
- DECLARE_MAC_BUF(mac);
/*
* setup adapter structure
* print remainder of startup message
*/
printk(KERN_INFO "%s: 3c505 at %#lx, irq %d, dma %d, "
- "addr %s, ",
+ "addr %pM, ",
dev->name, dev->base_addr, dev->irq, dev->dma,
- print_mac(mac, dev->dev_addr));
+ dev->dev_addr);
/*
* read more information from the adapter
printk(KERN_ERR "%s: adapter configuration failed\n", dev->name);
}
- dev->open = elp_open; /* local */
- dev->stop = elp_close; /* local */
- dev->get_stats = elp_get_stats; /* local */
- dev->hard_start_xmit = elp_start_xmit; /* local */
- dev->tx_timeout = elp_timeout; /* local */
+ dev->netdev_ops = &elp_netdev_ops;
dev->watchdog_timeo = 10*HZ;
- dev->set_multicast_list = elp_set_mc_list; /* local */
dev->ethtool_ops = &netdev_ethtool_ops; /* local */
dev->mem_start = dev->mem_end = 0;
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff