/*
* linux/drivers/mtd/onenand/onenand_base.c
*
- * Copyright (C) 2005 Samsung Electronics
+ * Copyright (C) 2005-2007 Samsung Electronics
* Kyungmin Park <kyungmin.park@samsung.com>
*
+ * Credits:
+ * Adrian Hunter <ext-adrian.hunter@nokia.com>:
+ * auto-placement support, read-while load support, various fixes
+ * Copyright (C) Nokia Corporation, 2007
+ *
+ * Vishak G <vishak.g at samsung.com>, Rohit Hagargundgi <h.rohit at samsung.com>
+ * Flex-OneNAND support
+ * Copyright (C) Samsung Electronics, 2008
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
#include <linux/jiffies.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/onenand.h>
#include <asm/io.h>
+/* Default Flex-OneNAND boundary and lock respectively */
+static int flex_bdry[MAX_DIES * 2] = { -1, 0, -1, 0 };
+
+module_param_array(flex_bdry, int, NULL, 0400);
+MODULE_PARM_DESC(flex_bdry, "SLC Boundary information for Flex-OneNAND"
+ "Syntax:flex_bdry=DIE_BDRY,LOCK,..."
+ "DIE_BDRY: SLC boundary of the die"
+ "LOCK: Locking information for SLC boundary"
+ " : 0->Set boundary in unlocked status"
+ " : 1->Set boundary in locked status");
+
+/**
+ * onenand_oob_128 - oob info for Flex-Onenand with 4KB page
+ * For now, we expose only 64 out of 80 ecc bytes
+ */
+static struct nand_ecclayout onenand_oob_128 = {
+ .eccbytes = 64,
+ .eccpos = {
+ 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,
+ 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
+ 38, 39, 40, 41, 42, 43, 44, 45, 46, 47,
+ 54, 55, 56, 57, 58, 59, 60, 61, 62, 63,
+ 70, 71, 72, 73, 74, 75, 76, 77, 78, 79,
+ 86, 87, 88, 89, 90, 91, 92, 93, 94, 95,
+ 102, 103, 104, 105
+ },
+ .oobfree = {
+ {2, 4}, {18, 4}, {34, 4}, {50, 4},
+ {66, 4}, {82, 4}, {98, 4}, {114, 4}
+ }
+};
+
/**
* onenand_oob_64 - oob info for large (2KB) page
*/
-static struct nand_oobinfo onenand_oob_64 = {
- .useecc = MTD_NANDECC_AUTOPLACE,
+static struct nand_ecclayout onenand_oob_64 = {
.eccbytes = 20,
.eccpos = {
8, 9, 10, 11, 12,
/**
* onenand_oob_32 - oob info for middle (1KB) page
*/
-static struct nand_oobinfo onenand_oob_32 = {
- .useecc = MTD_NANDECC_AUTOPLACE,
+static struct nand_ecclayout onenand_oob_32 = {
.eccbytes = 10,
.eccpos = {
8, 9, 10, 11, 12,
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 48 */
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 64 */
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 80 */
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 96 */
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 112 */
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 128 */
};
/**
*/
static int onenand_block_address(struct onenand_chip *this, int block)
{
- if (this->device_id & ONENAND_DEVICE_IS_DDP) {
- /* Device Flash Core select, NAND Flash Block Address */
- int dfs = 0;
-
- if (block & this->density_mask)
- dfs = 1;
-
- return (dfs << ONENAND_DDP_SHIFT) |
- (block & (this->density_mask - 1));
- }
+ /* Device Flash Core select, NAND Flash Block Address */
+ if (block & this->density_mask)
+ return ONENAND_DDP_CHIP1 | (block ^ this->density_mask);
return block;
}
*/
static int onenand_bufferram_address(struct onenand_chip *this, int block)
{
- if (this->device_id & ONENAND_DEVICE_IS_DDP) {
- /* Device BufferRAM Select */
- int dbs = 0;
-
- if (block & this->density_mask)
- dbs = 1;
+ /* Device BufferRAM Select */
+ if (block & this->density_mask)
+ return ONENAND_DDP_CHIP1;
- return (dbs << ONENAND_DDP_SHIFT);
- }
-
- return 0;
+ return ONENAND_DDP_CHIP0;
}
/**
}
/**
+ * flexonenand_block- For given address return block number
+ * @param this - OneNAND device structure
+ * @param addr - Address for which block number is needed
+ */
+static unsigned flexonenand_block(struct onenand_chip *this, loff_t addr)
+{
+ unsigned boundary, blk, die = 0;
+
+ if (ONENAND_IS_DDP(this) && addr >= this->diesize[0]) {
+ die = 1;
+ addr -= this->diesize[0];
+ }
+
+ boundary = this->boundary[die];
+
+ blk = addr >> (this->erase_shift - 1);
+ if (blk > boundary)
+ blk = (blk + boundary + 1) >> 1;
+
+ blk += die ? this->density_mask : 0;
+ return blk;
+}
+
+inline unsigned onenand_block(struct onenand_chip *this, loff_t addr)
+{
+ if (!FLEXONENAND(this))
+ return addr >> this->erase_shift;
+ return flexonenand_block(this, addr);
+}
+
+/**
+ * flexonenand_addr - Return address of the block
+ * @this: OneNAND device structure
+ * @block: Block number on Flex-OneNAND
+ *
+ * Return address of the block
+ */
+static loff_t flexonenand_addr(struct onenand_chip *this, int block)
+{
+ loff_t ofs = 0;
+ int die = 0, boundary;
+
+ if (ONENAND_IS_DDP(this) && block >= this->density_mask) {
+ block -= this->density_mask;
+ die = 1;
+ ofs = this->diesize[0];
+ }
+
+ boundary = this->boundary[die];
+ ofs += (loff_t)block << (this->erase_shift - 1);
+ if (block > (boundary + 1))
+ ofs += (loff_t)(block - boundary - 1) << (this->erase_shift - 1);
+ return ofs;
+}
+
+loff_t onenand_addr(struct onenand_chip *this, int block)
+{
+ if (!FLEXONENAND(this))
+ return (loff_t)block << this->erase_shift;
+ return flexonenand_addr(this, block);
+}
+EXPORT_SYMBOL(onenand_addr);
+
+/**
+ * onenand_get_density - [DEFAULT] Get OneNAND density
+ * @param dev_id OneNAND device ID
+ *
+ * Get OneNAND density from device ID
+ */
+static inline int onenand_get_density(int dev_id)
+{
+ int density = dev_id >> ONENAND_DEVICE_DENSITY_SHIFT;
+ return (density & ONENAND_DEVICE_DENSITY_MASK);
+}
+
+/**
+ * flexonenand_region - [Flex-OneNAND] Return erase region of addr
+ * @param mtd MTD device structure
+ * @param addr address whose erase region needs to be identified
+ */
+int flexonenand_region(struct mtd_info *mtd, loff_t addr)
+{
+ int i;
+
+ for (i = 0; i < mtd->numeraseregions; i++)
+ if (addr < mtd->eraseregions[i].offset)
+ break;
+ return i - 1;
+}
+EXPORT_SYMBOL(flexonenand_region);
+
+/**
* onenand_command - [DEFAULT] Send command to OneNAND device
* @param mtd MTD device structure
* @param cmd the command to be sent
static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, size_t len)
{
struct onenand_chip *this = mtd->priv;
- int value, readcmd = 0;
- int block, page;
- /* Now we use page size operation */
- int sectors = 4, count = 4;
+ int value, block, page;
/* Address translation */
switch (cmd) {
case ONENAND_CMD_UNLOCK:
case ONENAND_CMD_LOCK:
case ONENAND_CMD_LOCK_TIGHT:
+ case ONENAND_CMD_UNLOCK_ALL:
block = -1;
page = -1;
break;
+ case FLEXONENAND_CMD_PI_ACCESS:
+ /* addr contains die index */
+ block = addr * this->density_mask;
+ page = -1;
+ break;
+
case ONENAND_CMD_ERASE:
case ONENAND_CMD_BUFFERRAM:
- block = (int) (addr >> this->erase_shift);
+ case ONENAND_CMD_OTP_ACCESS:
+ block = onenand_block(this, addr);
page = -1;
break;
+ case FLEXONENAND_CMD_READ_PI:
+ cmd = ONENAND_CMD_READ;
+ block = addr * this->density_mask;
+ page = 0;
+ break;
+
default:
- block = (int) (addr >> this->erase_shift);
- page = (int) (addr >> this->page_shift);
+ block = onenand_block(this, addr);
+ page = (int) (addr - onenand_addr(this, block)) >> this->page_shift;
+
+ if (ONENAND_IS_2PLANE(this)) {
+ /* Make the even block number */
+ block &= ~1;
+ /* Is it the odd plane? */
+ if (addr & this->writesize)
+ block++;
+ page >>= 1;
+ }
page &= this->page_mask;
break;
}
value = onenand_bufferram_address(this, block);
this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2);
- /* Switch to the next data buffer */
- ONENAND_SET_NEXT_BUFFERRAM(this);
+ if (ONENAND_IS_MLC(this) || ONENAND_IS_2PLANE(this))
+ /* It is always BufferRAM0 */
+ ONENAND_SET_BUFFERRAM0(this);
+ else
+ /* Switch to the next data buffer */
+ ONENAND_SET_NEXT_BUFFERRAM(this);
return 0;
}
value = onenand_block_address(this, block);
this->write_word(value, this->base + ONENAND_REG_START_ADDRESS1);
- if (cmd == ONENAND_CMD_ERASE) {
- /* Select DataRAM for DDP */
- value = onenand_bufferram_address(this, block);
- this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2);
- }
+ /* Select DataRAM for DDP */
+ value = onenand_bufferram_address(this, block);
+ this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2);
}
if (page != -1) {
+ /* Now we use page size operation */
+ int sectors = 0, count = 0;
int dataram;
switch (cmd) {
+ case FLEXONENAND_CMD_RECOVER_LSB:
case ONENAND_CMD_READ:
case ONENAND_CMD_READOOB:
- dataram = ONENAND_SET_NEXT_BUFFERRAM(this);
- readcmd = 1;
+ if (ONENAND_IS_MLC(this))
+ /* It is always BufferRAM0 */
+ dataram = ONENAND_SET_BUFFERRAM0(this);
+ else
+ dataram = ONENAND_SET_NEXT_BUFFERRAM(this);
break;
default:
+ if (ONENAND_IS_2PLANE(this) && cmd == ONENAND_CMD_PROG)
+ cmd = ONENAND_CMD_2X_PROG;
dataram = ONENAND_CURRENT_BUFFERRAM(this);
break;
}
/* Write 'BSA, BSC' of DataRAM */
value = onenand_buffer_address(dataram, sectors, count);
this->write_word(value, this->base + ONENAND_REG_START_BUFFER);
-
- if (readcmd) {
- /* Select DataRAM for DDP */
- value = onenand_bufferram_address(this, block);
- this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2);
- }
}
/* Interrupt clear */
}
/**
+ * onenand_read_ecc - return ecc status
+ * @param this onenand chip structure
+ */
+static inline int onenand_read_ecc(struct onenand_chip *this)
+{
+ int ecc, i, result = 0;
+
+ if (!FLEXONENAND(this))
+ return this->read_word(this->base + ONENAND_REG_ECC_STATUS);
+
+ for (i = 0; i < 4; i++) {
+ ecc = this->read_word(this->base + ONENAND_REG_ECC_STATUS + i);
+ if (likely(!ecc))
+ continue;
+ if (ecc & FLEXONENAND_UNCORRECTABLE_ERROR)
+ return ONENAND_ECC_2BIT_ALL;
+ else
+ result = ONENAND_ECC_1BIT_ALL;
+ }
+
+ return result;
+}
+
+/**
* onenand_wait - [DEFAULT] wait until the command is done
* @param mtd MTD device structure
* @param state state to select the max. timeout value
unsigned long timeout;
unsigned int flags = ONENAND_INT_MASTER;
unsigned int interrupt = 0;
- unsigned int ctrl, ecc;
+ unsigned int ctrl;
/* The 20 msec is enough */
timeout = jiffies + msecs_to_jiffies(20);
if (state != FL_READING)
cond_resched();
- touch_softlockup_watchdog();
}
/* To get correct interrupt status in timeout case */
interrupt = this->read_word(this->base + ONENAND_REG_INTERRUPT);
ctrl = this->read_word(this->base + ONENAND_REG_CTRL_STATUS);
+ /*
+ * In the Spec. it checks the controller status first
+ * However if you get the correct information in case of
+ * power off recovery (POR) test, it should read ECC status first
+ */
+ if (interrupt & ONENAND_INT_READ) {
+ int ecc = onenand_read_ecc(this);
+ if (ecc) {
+ if (ecc & ONENAND_ECC_2BIT_ALL) {
+ printk(KERN_ERR "onenand_wait: ECC error = 0x%04x\n", ecc);
+ mtd->ecc_stats.failed++;
+ return -EBADMSG;
+ } else if (ecc & ONENAND_ECC_1BIT_ALL) {
+ printk(KERN_DEBUG "onenand_wait: correctable ECC error = 0x%04x\n", ecc);
+ mtd->ecc_stats.corrected++;
+ }
+ }
+ } else if (state == FL_READING) {
+ printk(KERN_ERR "onenand_wait: read timeout! ctrl=0x%04x intr=0x%04x\n", ctrl, interrupt);
+ return -EIO;
+ }
+
+ /* If there's controller error, it's a real error */
if (ctrl & ONENAND_CTRL_ERROR) {
- /* It maybe occur at initial bad block */
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_wait: controller error = 0x%04x\n", ctrl);
- /* Clear other interrupt bits for preventing ECC error */
- interrupt &= ONENAND_INT_MASTER;
+ printk(KERN_ERR "onenand_wait: controller error = 0x%04x\n",
+ ctrl);
+ if (ctrl & ONENAND_CTRL_LOCK)
+ printk(KERN_ERR "onenand_wait: it's locked error.\n");
+ return -EIO;
}
- if (ctrl & ONENAND_CTRL_LOCK) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_wait: it's locked error = 0x%04x\n", ctrl);
- return -EACCES;
+ return 0;
+}
+
+/*
+ * onenand_interrupt - [DEFAULT] onenand interrupt handler
+ * @param irq onenand interrupt number
+ * @param dev_id interrupt data
+ *
+ * complete the work
+ */
+static irqreturn_t onenand_interrupt(int irq, void *data)
+{
+ struct onenand_chip *this = data;
+
+ /* To handle shared interrupt */
+ if (!this->complete.done)
+ complete(&this->complete);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * onenand_interrupt_wait - [DEFAULT] wait until the command is done
+ * @param mtd MTD device structure
+ * @param state state to select the max. timeout value
+ *
+ * Wait for command done.
+ */
+static int onenand_interrupt_wait(struct mtd_info *mtd, int state)
+{
+ struct onenand_chip *this = mtd->priv;
+
+ wait_for_completion(&this->complete);
+
+ return onenand_wait(mtd, state);
+}
+
+/*
+ * onenand_try_interrupt_wait - [DEFAULT] try interrupt wait
+ * @param mtd MTD device structure
+ * @param state state to select the max. timeout value
+ *
+ * Try interrupt based wait (It is used one-time)
+ */
+static int onenand_try_interrupt_wait(struct mtd_info *mtd, int state)
+{
+ struct onenand_chip *this = mtd->priv;
+ unsigned long remain, timeout;
+
+ /* We use interrupt wait first */
+ this->wait = onenand_interrupt_wait;
+
+ timeout = msecs_to_jiffies(100);
+ remain = wait_for_completion_timeout(&this->complete, timeout);
+ if (!remain) {
+ printk(KERN_INFO "OneNAND: There's no interrupt. "
+ "We use the normal wait\n");
+
+ /* Release the irq */
+ free_irq(this->irq, this);
+
+ this->wait = onenand_wait;
}
- if (interrupt & ONENAND_INT_READ) {
- ecc = this->read_word(this->base + ONENAND_REG_ECC_STATUS);
- if (ecc & ONENAND_ECC_2BIT_ALL) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_wait: ECC error = 0x%04x\n", ecc);
- return -EBADMSG;
- }
+ return onenand_wait(mtd, state);
+}
+
+/*
+ * onenand_setup_wait - [OneNAND Interface] setup onenand wait method
+ * @param mtd MTD device structure
+ *
+ * There's two method to wait onenand work
+ * 1. polling - read interrupt status register
+ * 2. interrupt - use the kernel interrupt method
+ */
+static void onenand_setup_wait(struct mtd_info *mtd)
+{
+ struct onenand_chip *this = mtd->priv;
+ int syscfg;
+
+ init_completion(&this->complete);
+
+ if (this->irq <= 0) {
+ this->wait = onenand_wait;
+ return;
}
- return 0;
+ if (request_irq(this->irq, &onenand_interrupt,
+ IRQF_SHARED, "onenand", this)) {
+ /* If we can't get irq, use the normal wait */
+ this->wait = onenand_wait;
+ return;
+ }
+
+ /* Enable interrupt */
+ syscfg = this->read_word(this->base + ONENAND_REG_SYS_CFG1);
+ syscfg |= ONENAND_SYS_CFG1_IOBE;
+ this->write_word(syscfg, this->base + ONENAND_REG_SYS_CFG1);
+
+ this->wait = onenand_try_interrupt_wait;
}
/**
struct onenand_chip *this = mtd->priv;
if (ONENAND_CURRENT_BUFFERRAM(this)) {
+ /* Note: the 'this->writesize' is a real page size */
if (area == ONENAND_DATARAM)
- return mtd->oobblock;
+ return this->writesize;
if (area == ONENAND_SPARERAM)
return mtd->oobsize;
}
}
/**
+ * onenand_get_2x_blockpage - [GENERIC] Get blockpage at 2x program mode
+ * @param mtd MTD data structure
+ * @param addr address to check
+ * @return blockpage address
+ *
+ * Get blockpage address at 2x program mode
+ */
+static int onenand_get_2x_blockpage(struct mtd_info *mtd, loff_t addr)
+{
+ struct onenand_chip *this = mtd->priv;
+ int blockpage, block, page;
+
+ /* Calculate the even block number */
+ block = (int) (addr >> this->erase_shift) & ~1;
+ /* Is it the odd plane? */
+ if (addr & this->writesize)
+ block++;
+ page = (int) (addr >> (this->page_shift + 1)) & this->page_mask;
+ blockpage = (block << 7) | page;
+
+ return blockpage;
+}
+
+/**
* onenand_check_bufferram - [GENERIC] Check BufferRAM information
* @param mtd MTD data structure
* @param addr address to check
static int onenand_check_bufferram(struct mtd_info *mtd, loff_t addr)
{
struct onenand_chip *this = mtd->priv;
- int block, page;
- int i;
+ int blockpage, found = 0;
+ unsigned int i;
- block = (int) (addr >> this->erase_shift);
- page = (int) (addr >> this->page_shift);
- page &= this->page_mask;
+ if (ONENAND_IS_2PLANE(this))
+ blockpage = onenand_get_2x_blockpage(mtd, addr);
+ else
+ blockpage = (int) (addr >> this->page_shift);
+ /* Is there valid data? */
i = ONENAND_CURRENT_BUFFERRAM(this);
+ if (this->bufferram[i].blockpage == blockpage)
+ found = 1;
+ else {
+ /* Check another BufferRAM */
+ i = ONENAND_NEXT_BUFFERRAM(this);
+ if (this->bufferram[i].blockpage == blockpage) {
+ ONENAND_SET_NEXT_BUFFERRAM(this);
+ found = 1;
+ }
+ }
- /* Is there valid data? */
- if (this->bufferram[i].block == block &&
- this->bufferram[i].page == page &&
- this->bufferram[i].valid)
- return 1;
+ if (found && ONENAND_IS_DDP(this)) {
+ /* Select DataRAM for DDP */
+ int block = onenand_block(this, addr);
+ int value = onenand_bufferram_address(this, block);
+ this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2);
+ }
- return 0;
+ return found;
}
/**
*
* Update BufferRAM information
*/
-static int onenand_update_bufferram(struct mtd_info *mtd, loff_t addr,
+static void onenand_update_bufferram(struct mtd_info *mtd, loff_t addr,
int valid)
{
struct onenand_chip *this = mtd->priv;
- int block, page;
- int i;
+ int blockpage;
+ unsigned int i;
- block = (int) (addr >> this->erase_shift);
- page = (int) (addr >> this->page_shift);
- page &= this->page_mask;
+ if (ONENAND_IS_2PLANE(this))
+ blockpage = onenand_get_2x_blockpage(mtd, addr);
+ else
+ blockpage = (int) (addr >> this->page_shift);
- /* Invalidate BufferRAM */
- for (i = 0; i < MAX_BUFFERRAM; i++) {
- if (this->bufferram[i].block == block &&
- this->bufferram[i].page == page)
- this->bufferram[i].valid = 0;
- }
+ /* Invalidate another BufferRAM */
+ i = ONENAND_NEXT_BUFFERRAM(this);
+ if (this->bufferram[i].blockpage == blockpage)
+ this->bufferram[i].blockpage = -1;
/* Update BufferRAM */
i = ONENAND_CURRENT_BUFFERRAM(this);
- this->bufferram[i].block = block;
- this->bufferram[i].page = page;
- this->bufferram[i].valid = valid;
+ if (valid)
+ this->bufferram[i].blockpage = blockpage;
+ else
+ this->bufferram[i].blockpage = -1;
+}
- return 0;
+/**
+ * onenand_invalidate_bufferram - [GENERIC] Invalidate BufferRAM information
+ * @param mtd MTD data structure
+ * @param addr start address to invalidate
+ * @param len length to invalidate
+ *
+ * Invalidate BufferRAM information
+ */
+static void onenand_invalidate_bufferram(struct mtd_info *mtd, loff_t addr,
+ unsigned int len)
+{
+ struct onenand_chip *this = mtd->priv;
+ int i;
+ loff_t end_addr = addr + len;
+
+ /* Invalidate BufferRAM */
+ for (i = 0; i < MAX_BUFFERRAM; i++) {
+ loff_t buf_addr = this->bufferram[i].blockpage << this->page_shift;
+ if (buf_addr >= addr && buf_addr < end_addr)
+ this->bufferram[i].blockpage = -1;
+ }
}
/**
}
/**
- * onenand_read_ecc - [MTD Interface] Read data with ECC
+ * onenand_transfer_auto_oob - [Internal] oob auto-placement transfer
+ * @param mtd MTD device structure
+ * @param buf destination address
+ * @param column oob offset to read from
+ * @param thislen oob length to read
+ */
+static int onenand_transfer_auto_oob(struct mtd_info *mtd, uint8_t *buf, int column,
+ int thislen)
+{
+ struct onenand_chip *this = mtd->priv;
+ struct nand_oobfree *free;
+ int readcol = column;
+ int readend = column + thislen;
+ int lastgap = 0;
+ unsigned int i;
+ uint8_t *oob_buf = this->oob_buf;
+
+ free = this->ecclayout->oobfree;
+ for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) {
+ if (readcol >= lastgap)
+ readcol += free->offset - lastgap;
+ if (readend >= lastgap)
+ readend += free->offset - lastgap;
+ lastgap = free->offset + free->length;
+ }
+ this->read_bufferram(mtd, ONENAND_SPARERAM, oob_buf, 0, mtd->oobsize);
+ free = this->ecclayout->oobfree;
+ for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) {
+ int free_end = free->offset + free->length;
+ if (free->offset < readend && free_end > readcol) {
+ int st = max_t(int,free->offset,readcol);
+ int ed = min_t(int,free_end,readend);
+ int n = ed - st;
+ memcpy(buf, oob_buf + st, n);
+ buf += n;
+ } else if (column == 0)
+ break;
+ }
+ return 0;
+}
+
+/**
+ * onenand_recover_lsb - [Flex-OneNAND] Recover LSB page data
+ * @param mtd MTD device structure
+ * @param addr address to recover
+ * @param status return value from onenand_wait / onenand_bbt_wait
+ *
+ * MLC NAND Flash cell has paired pages - LSB page and MSB page. LSB page has
+ * lower page address and MSB page has higher page address in paired pages.
+ * If power off occurs during MSB page program, the paired LSB page data can
+ * become corrupt. LSB page recovery read is a way to read LSB page though page
+ * data are corrupted. When uncorrectable error occurs as a result of LSB page
+ * read after power up, issue LSB page recovery read.
+ */
+static int onenand_recover_lsb(struct mtd_info *mtd, loff_t addr, int status)
+{
+ struct onenand_chip *this = mtd->priv;
+ int i;
+
+ /* Recovery is only for Flex-OneNAND */
+ if (!FLEXONENAND(this))
+ return status;
+
+ /* check if we failed due to uncorrectable error */
+ if (status != -EBADMSG && status != ONENAND_BBT_READ_ECC_ERROR)
+ return status;
+
+ /* check if address lies in MLC region */
+ i = flexonenand_region(mtd, addr);
+ if (mtd->eraseregions[i].erasesize < (1 << this->erase_shift))
+ return status;
+
+ /* We are attempting to reread, so decrement stats.failed
+ * which was incremented by onenand_wait due to read failure
+ */
+ printk(KERN_INFO "onenand_recover_lsb: Attempting to recover from uncorrectable read\n");
+ mtd->ecc_stats.failed--;
+
+ /* Issue the LSB page recovery command */
+ this->command(mtd, FLEXONENAND_CMD_RECOVER_LSB, addr, this->writesize);
+ return this->wait(mtd, FL_READING);
+}
+
+/**
+ * onenand_mlc_read_ops_nolock - MLC OneNAND read main and/or out-of-band
* @param mtd MTD device structure
* @param from offset to read from
- * @param len number of bytes to read
- * @param retlen pointer to variable to store the number of read bytes
- * @param buf the databuffer to put data
- * @param oob_buf filesystem supplied oob data buffer
- * @param oobsel oob selection structure
+ * @param ops: oob operation description structure
*
- * OneNAND read with ECC
+ * MLC OneNAND / Flex-OneNAND has 4KB page size and 4KB dataram.
+ * So, read-while-load is not present.
*/
-static int onenand_read_ecc(struct mtd_info *mtd, loff_t from, size_t len,
- size_t *retlen, u_char *buf,
- u_char *oob_buf, struct nand_oobinfo *oobsel)
+static int onenand_mlc_read_ops_nolock(struct mtd_info *mtd, loff_t from,
+ struct mtd_oob_ops *ops)
{
struct onenand_chip *this = mtd->priv;
- int read = 0, column;
- int thislen;
+ struct mtd_ecc_stats stats;
+ size_t len = ops->len;
+ size_t ooblen = ops->ooblen;
+ u_char *buf = ops->datbuf;
+ u_char *oobbuf = ops->oobbuf;
+ int read = 0, column, thislen;
+ int oobread = 0, oobcolumn, thisooblen, oobsize;
int ret = 0;
+ int writesize = this->writesize;
+
+ DEBUG(MTD_DEBUG_LEVEL3, "onenand_mlc_read_ops_nolock: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
- DEBUG(MTD_DEBUG_LEVEL3, "onenand_read_ecc: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
+ if (ops->mode == MTD_OOB_AUTO)
+ oobsize = this->ecclayout->oobavail;
+ else
+ oobsize = mtd->oobsize;
+
+ oobcolumn = from & (mtd->oobsize - 1);
/* Do not allow reads past end of device */
- if ((from + len) > mtd->size) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_read_ecc: Attempt read beyond end of device\n");
- *retlen = 0;
+ if (from + len > mtd->size) {
+ printk(KERN_ERR "onenand_mlc_read_ops_nolock: Attempt read beyond end of device\n");
+ ops->retlen = 0;
+ ops->oobretlen = 0;
return -EINVAL;
}
- /* Grab the lock and see if the device is available */
- onenand_get_device(mtd, FL_READING);
-
- /* TODO handling oob */
+ stats = mtd->ecc_stats;
while (read < len) {
- thislen = min_t(int, mtd->oobblock, len - read);
+ cond_resched();
- column = from & (mtd->oobblock - 1);
- if (column + thislen > mtd->oobblock)
- thislen = mtd->oobblock - column;
+ thislen = min_t(int, writesize, len - read);
+
+ column = from & (writesize - 1);
+ if (column + thislen > writesize)
+ thislen = writesize - column;
if (!onenand_check_bufferram(mtd, from)) {
- this->command(mtd, ONENAND_CMD_READ, from, mtd->oobblock);
+ this->command(mtd, ONENAND_CMD_READ, from, writesize);
ret = this->wait(mtd, FL_READING);
- /* First copy data and check return value for ECC handling */
- onenand_update_bufferram(mtd, from, 1);
+ if (unlikely(ret))
+ ret = onenand_recover_lsb(mtd, from, ret);
+ onenand_update_bufferram(mtd, from, !ret);
+ if (ret == -EBADMSG)
+ ret = 0;
}
this->read_bufferram(mtd, ONENAND_DATARAM, buf, column, thislen);
+ if (oobbuf) {
+ thisooblen = oobsize - oobcolumn;
+ thisooblen = min_t(int, thisooblen, ooblen - oobread);
- read += thislen;
+ if (ops->mode == MTD_OOB_AUTO)
+ onenand_transfer_auto_oob(mtd, oobbuf, oobcolumn, thisooblen);
+ else
+ this->read_bufferram(mtd, ONENAND_SPARERAM, oobbuf, oobcolumn, thisooblen);
+ oobread += thisooblen;
+ oobbuf += thisooblen;
+ oobcolumn = 0;
+ }
+ read += thislen;
if (read == len)
break;
- if (ret) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_read_ecc: read failed = %d\n", ret);
- goto out;
- }
-
from += thislen;
buf += thislen;
}
-out:
- /* Deselect and wake up anyone waiting on the device */
- onenand_release_device(mtd);
-
/*
* Return success, if no ECC failures, else -EBADMSG
* fs driver will take care of that, because
* retlen == desired len and result == -EBADMSG
*/
- *retlen = read;
- return ret;
+ ops->retlen = read;
+ ops->oobretlen = oobread;
+
+ if (ret)
+ return ret;
+
+ if (mtd->ecc_stats.failed - stats.failed)
+ return -EBADMSG;
+
+ return mtd->ecc_stats.corrected - stats.corrected ? -EUCLEAN : 0;
}
/**
- * onenand_read - [MTD Interface] MTD compability function for onenand_read_ecc
+ * onenand_read_ops_nolock - [OneNAND Interface] OneNAND read main and/or out-of-band
* @param mtd MTD device structure
* @param from offset to read from
- * @param len number of bytes to read
- * @param retlen pointer to variable to store the number of read bytes
- * @param buf the databuffer to put data
+ * @param ops: oob operation description structure
*
- * This function simply calls onenand_read_ecc with oob buffer and oobsel = NULL
-*/
-static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len,
- size_t *retlen, u_char *buf)
+ * OneNAND read main and/or out-of-band data
+ */
+static int onenand_read_ops_nolock(struct mtd_info *mtd, loff_t from,
+ struct mtd_oob_ops *ops)
{
- return onenand_read_ecc(mtd, from, len, retlen, buf, NULL, NULL);
-}
+ struct onenand_chip *this = mtd->priv;
+ struct mtd_ecc_stats stats;
+ size_t len = ops->len;
+ size_t ooblen = ops->ooblen;
+ u_char *buf = ops->datbuf;
+ u_char *oobbuf = ops->oobbuf;
+ int read = 0, column, thislen;
+ int oobread = 0, oobcolumn, thisooblen, oobsize;
+ int ret = 0, boundary = 0;
+ int writesize = this->writesize;
+
+ DEBUG(MTD_DEBUG_LEVEL3, "onenand_read_ops_nolock: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
+
+ if (ops->mode == MTD_OOB_AUTO)
+ oobsize = this->ecclayout->oobavail;
+ else
+ oobsize = mtd->oobsize;
-/**
- * onenand_read_oob - [MTD Interface] OneNAND read out-of-band
+ oobcolumn = from & (mtd->oobsize - 1);
+
+ /* Do not allow reads past end of device */
+ if ((from + len) > mtd->size) {
+ printk(KERN_ERR "onenand_read_ops_nolock: Attempt read beyond end of device\n");
+ ops->retlen = 0;
+ ops->oobretlen = 0;
+ return -EINVAL;
+ }
+
+ stats = mtd->ecc_stats;
+
+ /* Read-while-load method */
+
+ /* Do first load to bufferRAM */
+ if (read < len) {
+ if (!onenand_check_bufferram(mtd, from)) {
+ this->command(mtd, ONENAND_CMD_READ, from, writesize);
+ ret = this->wait(mtd, FL_READING);
+ onenand_update_bufferram(mtd, from, !ret);
+ if (ret == -EBADMSG)
+ ret = 0;
+ }
+ }
+
+ thislen = min_t(int, writesize, len - read);
+ column = from & (writesize - 1);
+ if (column + thislen > writesize)
+ thislen = writesize - column;
+
+ while (!ret) {
+ /* If there is more to load then start next load */
+ from += thislen;
+ if (read + thislen < len) {
+ this->command(mtd, ONENAND_CMD_READ, from, writesize);
+ /*
+ * Chip boundary handling in DDP
+ * Now we issued chip 1 read and pointed chip 1
+ * bufferram so we have to point chip 0 bufferram.
+ */
+ if (ONENAND_IS_DDP(this) &&
+ unlikely(from == (this->chipsize >> 1))) {
+ this->write_word(ONENAND_DDP_CHIP0, this->base + ONENAND_REG_START_ADDRESS2);
+ boundary = 1;
+ } else
+ boundary = 0;
+ ONENAND_SET_PREV_BUFFERRAM(this);
+ }
+ /* While load is going, read from last bufferRAM */
+ this->read_bufferram(mtd, ONENAND_DATARAM, buf, column, thislen);
+
+ /* Read oob area if needed */
+ if (oobbuf) {
+ thisooblen = oobsize - oobcolumn;
+ thisooblen = min_t(int, thisooblen, ooblen - oobread);
+
+ if (ops->mode == MTD_OOB_AUTO)
+ onenand_transfer_auto_oob(mtd, oobbuf, oobcolumn, thisooblen);
+ else
+ this->read_bufferram(mtd, ONENAND_SPARERAM, oobbuf, oobcolumn, thisooblen);
+ oobread += thisooblen;
+ oobbuf += thisooblen;
+ oobcolumn = 0;
+ }
+
+ /* See if we are done */
+ read += thislen;
+ if (read == len)
+ break;
+ /* Set up for next read from bufferRAM */
+ if (unlikely(boundary))
+ this->write_word(ONENAND_DDP_CHIP1, this->base + ONENAND_REG_START_ADDRESS2);
+ ONENAND_SET_NEXT_BUFFERRAM(this);
+ buf += thislen;
+ thislen = min_t(int, writesize, len - read);
+ column = 0;
+ cond_resched();
+ /* Now wait for load */
+ ret = this->wait(mtd, FL_READING);
+ onenand_update_bufferram(mtd, from, !ret);
+ if (ret == -EBADMSG)
+ ret = 0;
+ }
+
+ /*
+ * Return success, if no ECC failures, else -EBADMSG
+ * fs driver will take care of that, because
+ * retlen == desired len and result == -EBADMSG
+ */
+ ops->retlen = read;
+ ops->oobretlen = oobread;
+
+ if (ret)
+ return ret;
+
+ if (mtd->ecc_stats.failed - stats.failed)
+ return -EBADMSG;
+
+ return mtd->ecc_stats.corrected - stats.corrected ? -EUCLEAN : 0;
+}
+
+/**
+ * onenand_read_oob_nolock - [MTD Interface] OneNAND read out-of-band
+ * @param mtd MTD device structure
+ * @param from offset to read from
+ * @param ops: oob operation description structure
+ *
+ * OneNAND read out-of-band data from the spare area
+ */
+static int onenand_read_oob_nolock(struct mtd_info *mtd, loff_t from,
+ struct mtd_oob_ops *ops)
+{
+ struct onenand_chip *this = mtd->priv;
+ struct mtd_ecc_stats stats;
+ int read = 0, thislen, column, oobsize;
+ size_t len = ops->ooblen;
+ mtd_oob_mode_t mode = ops->mode;
+ u_char *buf = ops->oobbuf;
+ int ret = 0, readcmd;
+
+ from += ops->ooboffs;
+
+ DEBUG(MTD_DEBUG_LEVEL3, "onenand_read_oob_nolock: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
+
+ /* Initialize return length value */
+ ops->oobretlen = 0;
+
+ if (mode == MTD_OOB_AUTO)
+ oobsize = this->ecclayout->oobavail;
+ else
+ oobsize = mtd->oobsize;
+
+ column = from & (mtd->oobsize - 1);
+
+ if (unlikely(column >= oobsize)) {
+ printk(KERN_ERR "onenand_read_oob_nolock: Attempted to start read outside oob\n");
+ return -EINVAL;
+ }
+
+ /* Do not allow reads past end of device */
+ if (unlikely(from >= mtd->size ||
+ column + len > ((mtd->size >> this->page_shift) -
+ (from >> this->page_shift)) * oobsize)) {
+ printk(KERN_ERR "onenand_read_oob_nolock: Attempted to read beyond end of device\n");
+ return -EINVAL;
+ }
+
+ stats = mtd->ecc_stats;
+
+ readcmd = ONENAND_IS_MLC(this) ? ONENAND_CMD_READ : ONENAND_CMD_READOOB;
+
+ while (read < len) {
+ cond_resched();
+
+ thislen = oobsize - column;
+ thislen = min_t(int, thislen, len);
+
+ this->command(mtd, readcmd, from, mtd->oobsize);
+
+ onenand_update_bufferram(mtd, from, 0);
+
+ ret = this->wait(mtd, FL_READING);
+ if (unlikely(ret))
+ ret = onenand_recover_lsb(mtd, from, ret);
+
+ if (ret && ret != -EBADMSG) {
+ printk(KERN_ERR "onenand_read_oob_nolock: read failed = 0x%x\n", ret);
+ break;
+ }
+
+ if (mode == MTD_OOB_AUTO)
+ onenand_transfer_auto_oob(mtd, buf, column, thislen);
+ else
+ this->read_bufferram(mtd, ONENAND_SPARERAM, buf, column, thislen);
+
+ read += thislen;
+
+ if (read == len)
+ break;
+
+ buf += thislen;
+
+ /* Read more? */
+ if (read < len) {
+ /* Page size */
+ from += mtd->writesize;
+ column = 0;
+ }
+ }
+
+ ops->oobretlen = read;
+
+ if (ret)
+ return ret;
+
+ if (mtd->ecc_stats.failed - stats.failed)
+ return -EBADMSG;
+
+ return 0;
+}
+
+/**
+ * onenand_read - [MTD Interface] Read data from flash
* @param mtd MTD device structure
* @param from offset to read from
* @param len number of bytes to read
* @param retlen pointer to variable to store the number of read bytes
* @param buf the databuffer to put data
*
- * OneNAND read out-of-band data from the spare area
- */
-static int onenand_read_oob(struct mtd_info *mtd, loff_t from, size_t len,
+ * Read with ecc
+*/
+static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len,
size_t *retlen, u_char *buf)
{
struct onenand_chip *this = mtd->priv;
+ struct mtd_oob_ops ops = {
+ .len = len,
+ .ooblen = 0,
+ .datbuf = buf,
+ .oobbuf = NULL,
+ };
+ int ret;
+
+ onenand_get_device(mtd, FL_READING);
+ ret = ONENAND_IS_MLC(this) ?
+ onenand_mlc_read_ops_nolock(mtd, from, &ops) :
+ onenand_read_ops_nolock(mtd, from, &ops);
+ onenand_release_device(mtd);
+
+ *retlen = ops.retlen;
+ return ret;
+}
+
+/**
+ * onenand_read_oob - [MTD Interface] Read main and/or out-of-band
+ * @param mtd: MTD device structure
+ * @param from: offset to read from
+ * @param ops: oob operation description structure
+
+ * Read main and/or out-of-band
+ */
+static int onenand_read_oob(struct mtd_info *mtd, loff_t from,
+ struct mtd_oob_ops *ops)
+{
+ struct onenand_chip *this = mtd->priv;
+ int ret;
+
+ switch (ops->mode) {
+ case MTD_OOB_PLACE:
+ case MTD_OOB_AUTO:
+ break;
+ case MTD_OOB_RAW:
+ /* Not implemented yet */
+ default:
+ return -EINVAL;
+ }
+
+ onenand_get_device(mtd, FL_READING);
+ if (ops->datbuf)
+ ret = ONENAND_IS_MLC(this) ?
+ onenand_mlc_read_ops_nolock(mtd, from, ops) :
+ onenand_read_ops_nolock(mtd, from, ops);
+ else
+ ret = onenand_read_oob_nolock(mtd, from, ops);
+ onenand_release_device(mtd);
+
+ return ret;
+}
+
+/**
+ * onenand_bbt_wait - [DEFAULT] wait until the command is done
+ * @param mtd MTD device structure
+ * @param state state to select the max. timeout value
+ *
+ * Wait for command done.
+ */
+static int onenand_bbt_wait(struct mtd_info *mtd, int state)
+{
+ struct onenand_chip *this = mtd->priv;
+ unsigned long timeout;
+ unsigned int interrupt;
+ unsigned int ctrl;
+
+ /* The 20 msec is enough */
+ timeout = jiffies + msecs_to_jiffies(20);
+ while (time_before(jiffies, timeout)) {
+ interrupt = this->read_word(this->base + ONENAND_REG_INTERRUPT);
+ if (interrupt & ONENAND_INT_MASTER)
+ break;
+ }
+ /* To get correct interrupt status in timeout case */
+ interrupt = this->read_word(this->base + ONENAND_REG_INTERRUPT);
+ ctrl = this->read_word(this->base + ONENAND_REG_CTRL_STATUS);
+
+ if (interrupt & ONENAND_INT_READ) {
+ int ecc = onenand_read_ecc(this);
+ if (ecc & ONENAND_ECC_2BIT_ALL) {
+ printk(KERN_INFO "onenand_bbt_wait: ecc error = 0x%04x"
+ ", controller error 0x%04x\n", ecc, ctrl);
+ return ONENAND_BBT_READ_ECC_ERROR;
+ }
+ } else {
+ printk(KERN_ERR "onenand_bbt_wait: read timeout!"
+ "ctrl=0x%04x intr=0x%04x\n", ctrl, interrupt);
+ return ONENAND_BBT_READ_FATAL_ERROR;
+ }
+
+ /* Initial bad block case: 0x2400 or 0x0400 */
+ if (ctrl & ONENAND_CTRL_ERROR) {
+ printk(KERN_DEBUG "onenand_bbt_wait: "
+ "controller error = 0x%04x\n", ctrl);
+ return ONENAND_BBT_READ_ERROR;
+ }
+
+ return 0;
+}
+
+/**
+ * onenand_bbt_read_oob - [MTD Interface] OneNAND read out-of-band for bbt scan
+ * @param mtd MTD device structure
+ * @param from offset to read from
+ * @param ops oob operation description structure
+ *
+ * OneNAND read out-of-band data from the spare area for bbt scan
+ */
+int onenand_bbt_read_oob(struct mtd_info *mtd, loff_t from,
+ struct mtd_oob_ops *ops)
+{
+ struct onenand_chip *this = mtd->priv;
int read = 0, thislen, column;
- int ret = 0;
+ int ret = 0, readcmd;
+ size_t len = ops->ooblen;
+ u_char *buf = ops->oobbuf;
- DEBUG(MTD_DEBUG_LEVEL3, "onenand_read_oob: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
+ DEBUG(MTD_DEBUG_LEVEL3, "onenand_bbt_read_oob: from = 0x%08x, len = %zi\n", (unsigned int) from, len);
- /* Initialize return length value */
- *retlen = 0;
+ /* Initialize return value */
+ ops->oobretlen = 0;
/* Do not allow reads past end of device */
if (unlikely((from + len) > mtd->size)) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_read_oob: Attempt read beyond end of device\n");
- return -EINVAL;
+ printk(KERN_ERR "onenand_bbt_read_oob: Attempt read beyond end of device\n");
+ return ONENAND_BBT_READ_FATAL_ERROR;
}
/* Grab the lock and see if the device is available */
column = from & (mtd->oobsize - 1);
+ readcmd = ONENAND_IS_MLC(this) ? ONENAND_CMD_READ : ONENAND_CMD_READOOB;
+
while (read < len) {
+ cond_resched();
+
thislen = mtd->oobsize - column;
thislen = min_t(int, thislen, len);
- this->command(mtd, ONENAND_CMD_READOOB, from, mtd->oobsize);
+ this->command(mtd, readcmd, from, mtd->oobsize);
onenand_update_bufferram(mtd, from, 0);
- ret = this->wait(mtd, FL_READING);
- /* First copy data and check return value for ECC handling */
+ ret = this->bbt_wait(mtd, FL_READING);
+ if (unlikely(ret))
+ ret = onenand_recover_lsb(mtd, from, ret);
- this->read_bufferram(mtd, ONENAND_SPARERAM, buf, column, thislen);
+ if (ret)
+ break;
+ this->read_bufferram(mtd, ONENAND_SPARERAM, buf, column, thislen);
read += thislen;
-
if (read == len)
break;
- if (ret) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_read_oob: read failed = %d\n", ret);
- goto out;
- }
-
buf += thislen;
/* Read more? */
if (read < len) {
- /* Page size */
- from += mtd->oobblock;
+ /* Update Page size */
+ from += this->writesize;
column = 0;
}
}
-out:
/* Deselect and wake up anyone waiting on the device */
onenand_release_device(mtd);
- *retlen = read;
+ ops->oobretlen = read;
return ret;
}
* @param mtd MTD device structure
* @param buf the databuffer to verify
* @param to offset to read from
- * @param len number of bytes to read and compare
- *
*/
-static int onenand_verify_oob(struct mtd_info *mtd, const u_char *buf, loff_t to, int len)
+static int onenand_verify_oob(struct mtd_info *mtd, const u_char *buf, loff_t to)
{
struct onenand_chip *this = mtd->priv;
- char *readp = this->page_buf;
- int column = to & (mtd->oobsize - 1);
- int status, i;
+ u_char *oob_buf = this->oob_buf;
+ int status, i, readcmd;
+
+ readcmd = ONENAND_IS_MLC(this) ? ONENAND_CMD_READ : ONENAND_CMD_READOOB;
- this->command(mtd, ONENAND_CMD_READOOB, to, mtd->oobsize);
+ this->command(mtd, readcmd, to, mtd->oobsize);
onenand_update_bufferram(mtd, to, 0);
status = this->wait(mtd, FL_READING);
if (status)
return status;
- this->read_bufferram(mtd, ONENAND_SPARERAM, readp, column, len);
-
- for(i = 0; i < len; i++)
- if (buf[i] != 0xFF && buf[i] != readp[i])
+ this->read_bufferram(mtd, ONENAND_SPARERAM, oob_buf, 0, mtd->oobsize);
+ for (i = 0; i < mtd->oobsize; i++)
+ if (buf[i] != 0xFF && buf[i] != oob_buf[i])
return -EBADMSG;
return 0;
}
/**
- * onenand_verify_page - [GENERIC] verify the chip contents after a write
- * @param mtd MTD device structure
- * @param buf the databuffer to verify
- *
- * Check DataRAM area directly
+ * onenand_verify - [GENERIC] verify the chip contents after a write
+ * @param mtd MTD device structure
+ * @param buf the databuffer to verify
+ * @param addr offset to read from
+ * @param len number of bytes to read and compare
*/
-static int onenand_verify_page(struct mtd_info *mtd, u_char *buf, loff_t addr)
+static int onenand_verify(struct mtd_info *mtd, const u_char *buf, loff_t addr, size_t len)
{
struct onenand_chip *this = mtd->priv;
- void __iomem *dataram0, *dataram1;
+ void __iomem *dataram;
int ret = 0;
+ int thislen, column;
- this->command(mtd, ONENAND_CMD_READ, addr, mtd->oobblock);
+ while (len != 0) {
+ thislen = min_t(int, this->writesize, len);
+ column = addr & (this->writesize - 1);
+ if (column + thislen > this->writesize)
+ thislen = this->writesize - column;
- ret = this->wait(mtd, FL_READING);
- if (ret)
- return ret;
+ this->command(mtd, ONENAND_CMD_READ, addr, this->writesize);
+
+ onenand_update_bufferram(mtd, addr, 0);
- onenand_update_bufferram(mtd, addr, 1);
+ ret = this->wait(mtd, FL_READING);
+ if (ret)
+ return ret;
- /* Check, if the two dataram areas are same */
- dataram0 = this->base + ONENAND_DATARAM;
- dataram1 = dataram0 + mtd->oobblock;
+ onenand_update_bufferram(mtd, addr, 1);
- if (memcmp(dataram0, dataram1, mtd->oobblock))
- return -EBADMSG;
+ dataram = this->base + ONENAND_DATARAM;
+ dataram += onenand_bufferram_offset(mtd, ONENAND_DATARAM);
+
+ if (memcmp(buf, dataram + column, thislen))
+ return -EBADMSG;
+
+ len -= thislen;
+ buf += thislen;
+ addr += thislen;
+ }
return 0;
}
#else
-#define onenand_verify_page(...) (0)
+#define onenand_verify(...) (0)
#define onenand_verify_oob(...) (0)
#endif
-#define NOTALIGNED(x) ((x & (mtd->oobblock - 1)) != 0)
+#define NOTALIGNED(x) ((x & (this->subpagesize - 1)) != 0)
+
+static void onenand_panic_wait(struct mtd_info *mtd)
+{
+ struct onenand_chip *this = mtd->priv;
+ unsigned int interrupt;
+ int i;
+
+ for (i = 0; i < 2000; i++) {
+ interrupt = this->read_word(this->base + ONENAND_REG_INTERRUPT);
+ if (interrupt & ONENAND_INT_MASTER)
+ break;
+ udelay(10);
+ }
+}
/**
- * onenand_write_ecc - [MTD Interface] OneNAND write with ECC
+ * onenand_panic_write - [MTD Interface] write buffer to FLASH in a panic context
* @param mtd MTD device structure
* @param to offset to write to
* @param len number of bytes to write
* @param retlen pointer to variable to store the number of written bytes
* @param buf the data to write
- * @param eccbuf filesystem supplied oob data buffer
- * @param oobsel oob selection structure
*
- * OneNAND write with ECC
+ * Write with ECC
*/
-static int onenand_write_ecc(struct mtd_info *mtd, loff_t to, size_t len,
- size_t *retlen, const u_char *buf,
- u_char *eccbuf, struct nand_oobinfo *oobsel)
+static int onenand_panic_write(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t *retlen, const u_char *buf)
{
struct onenand_chip *this = mtd->priv;
+ int column, subpage;
int written = 0;
int ret = 0;
- DEBUG(MTD_DEBUG_LEVEL3, "onenand_write_ecc: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len);
+ if (this->state == FL_PM_SUSPENDED)
+ return -EBUSY;
+
+ /* Wait for any existing operation to clear */
+ onenand_panic_wait(mtd);
+
+ DEBUG(MTD_DEBUG_LEVEL3, "onenand_panic_write: to = 0x%08x, len = %i\n",
+ (unsigned int) to, (int) len);
/* Initialize retlen, in case of early exit */
*retlen = 0;
/* Do not allow writes past end of device */
if (unlikely((to + len) > mtd->size)) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_write_ecc: Attempt write to past end of device\n");
+ printk(KERN_ERR "onenand_panic_write: Attempt write to past end of device\n");
return -EINVAL;
}
/* Reject writes, which are not page aligned */
- if (unlikely(NOTALIGNED(to)) || unlikely(NOTALIGNED(len))) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_write_ecc: Attempt to write not page aligned data\n");
+ if (unlikely(NOTALIGNED(to) || NOTALIGNED(len))) {
+ printk(KERN_ERR "onenand_panic_write: Attempt to write not page aligned data\n");
return -EINVAL;
}
- /* Grab the lock and see if the device is available */
- onenand_get_device(mtd, FL_WRITING);
+ column = to & (mtd->writesize - 1);
/* Loop until all data write */
while (written < len) {
- int thislen = min_t(int, mtd->oobblock, len - written);
+ int thislen = min_t(int, mtd->writesize - column, len - written);
+ u_char *wbuf = (u_char *) buf;
- this->command(mtd, ONENAND_CMD_BUFFERRAM, to, mtd->oobblock);
+ this->command(mtd, ONENAND_CMD_BUFFERRAM, to, thislen);
- this->write_bufferram(mtd, ONENAND_DATARAM, buf, 0, thislen);
+ /* Partial page write */
+ subpage = thislen < mtd->writesize;
+ if (subpage) {
+ memset(this->page_buf, 0xff, mtd->writesize);
+ memcpy(this->page_buf + column, buf, thislen);
+ wbuf = this->page_buf;
+ }
+
+ this->write_bufferram(mtd, ONENAND_DATARAM, wbuf, 0, mtd->writesize);
this->write_bufferram(mtd, ONENAND_SPARERAM, ffchars, 0, mtd->oobsize);
- this->command(mtd, ONENAND_CMD_PROG, to, mtd->oobblock);
+ this->command(mtd, ONENAND_CMD_PROG, to, mtd->writesize);
- onenand_update_bufferram(mtd, to, 1);
+ onenand_panic_wait(mtd);
- ret = this->wait(mtd, FL_WRITING);
- if (ret) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_write_ecc: write filaed %d\n", ret);
- goto out;
+ /* In partial page write we don't update bufferram */
+ onenand_update_bufferram(mtd, to, !ret && !subpage);
+ if (ONENAND_IS_2PLANE(this)) {
+ ONENAND_SET_BUFFERRAM1(this);
+ onenand_update_bufferram(mtd, to + this->writesize, !ret && !subpage);
}
- written += thislen;
-
- /* Only check verify write turn on */
- ret = onenand_verify_page(mtd, (u_char *) buf, to);
if (ret) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_write_ecc: verify failed %d\n", ret);
- goto out;
+ printk(KERN_ERR "onenand_panic_write: write failed %d\n", ret);
+ break;
}
+ written += thislen;
+
if (written == len)
break;
+ column = 0;
to += thislen;
buf += thislen;
}
-out:
- /* Deselect and wake up anyone waiting on the device */
- onenand_release_device(mtd);
-
*retlen = written;
-
return ret;
}
/**
- * onenand_write - [MTD Interface] compability function for onenand_write_ecc
+ * onenand_fill_auto_oob - [Internal] oob auto-placement transfer
* @param mtd MTD device structure
- * @param to offset to write to
- * @param len number of bytes to write
- * @param retlen pointer to variable to store the number of written bytes
- * @param buf the data to write
- *
- * This function simply calls onenand_write_ecc
- * with oob buffer and oobsel = NULL
+ * @param oob_buf oob buffer
+ * @param buf source address
+ * @param column oob offset to write to
+ * @param thislen oob length to write
*/
-static int onenand_write(struct mtd_info *mtd, loff_t to, size_t len,
- size_t *retlen, const u_char *buf)
+static int onenand_fill_auto_oob(struct mtd_info *mtd, u_char *oob_buf,
+ const u_char *buf, int column, int thislen)
{
- return onenand_write_ecc(mtd, to, len, retlen, buf, NULL, NULL);
+ struct onenand_chip *this = mtd->priv;
+ struct nand_oobfree *free;
+ int writecol = column;
+ int writeend = column + thislen;
+ int lastgap = 0;
+ unsigned int i;
+
+ free = this->ecclayout->oobfree;
+ for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) {
+ if (writecol >= lastgap)
+ writecol += free->offset - lastgap;
+ if (writeend >= lastgap)
+ writeend += free->offset - lastgap;
+ lastgap = free->offset + free->length;
+ }
+ free = this->ecclayout->oobfree;
+ for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) {
+ int free_end = free->offset + free->length;
+ if (free->offset < writeend && free_end > writecol) {
+ int st = max_t(int,free->offset,writecol);
+ int ed = min_t(int,free_end,writeend);
+ int n = ed - st;
+ memcpy(oob_buf + st, buf, n);
+ buf += n;
+ } else if (column == 0)
+ break;
+ }
+ return 0;
}
/**
- * onenand_write_oob - [MTD Interface] OneNAND write out-of-band
+ * onenand_write_ops_nolock - [OneNAND Interface] write main and/or out-of-band
* @param mtd MTD device structure
* @param to offset to write to
- * @param len number of bytes to write
- * @param retlen pointer to variable to store the number of written bytes
- * @param buf the data to write
+ * @param ops oob operation description structure
*
- * OneNAND write out-of-band
+ * Write main and/or oob with ECC
*/
-static int onenand_write_oob(struct mtd_info *mtd, loff_t to, size_t len,
- size_t *retlen, const u_char *buf)
+static int onenand_write_ops_nolock(struct mtd_info *mtd, loff_t to,
+ struct mtd_oob_ops *ops)
{
struct onenand_chip *this = mtd->priv;
- int column, ret = 0;
- int written = 0;
+ int written = 0, column, thislen = 0, subpage = 0;
+ int prev = 0, prevlen = 0, prev_subpage = 0, first = 1;
+ int oobwritten = 0, oobcolumn, thisooblen, oobsize;
+ size_t len = ops->len;
+ size_t ooblen = ops->ooblen;
+ const u_char *buf = ops->datbuf;
+ const u_char *oob = ops->oobbuf;
+ u_char *oobbuf;
+ int ret = 0;
- DEBUG(MTD_DEBUG_LEVEL3, "onenand_write_oob: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len);
+ DEBUG(MTD_DEBUG_LEVEL3, "onenand_write_ops_nolock: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len);
/* Initialize retlen, in case of early exit */
- *retlen = 0;
+ ops->retlen = 0;
+ ops->oobretlen = 0;
/* Do not allow writes past end of device */
if (unlikely((to + len) > mtd->size)) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_write_oob: Attempt write to past end of device\n");
+ printk(KERN_ERR "onenand_write_ops_nolock: Attempt write to past end of device\n");
return -EINVAL;
}
- /* Grab the lock and see if the device is available */
- onenand_get_device(mtd, FL_WRITING);
+ /* Reject writes, which are not page aligned */
+ if (unlikely(NOTALIGNED(to) || NOTALIGNED(len))) {
+ printk(KERN_ERR "onenand_write_ops_nolock: Attempt to write not page aligned data\n");
+ return -EINVAL;
+ }
- /* Loop until all data write */
- while (written < len) {
- int thislen = min_t(int, mtd->oobsize, len - written);
+ /* Check zero length */
+ if (!len)
+ return 0;
- column = to & (mtd->oobsize - 1);
+ if (ops->mode == MTD_OOB_AUTO)
+ oobsize = this->ecclayout->oobavail;
+ else
+ oobsize = mtd->oobsize;
- this->command(mtd, ONENAND_CMD_BUFFERRAM, to, mtd->oobsize);
+ oobcolumn = to & (mtd->oobsize - 1);
- /* We send data to spare ram with oobsize
- * to prevent byte access */
- memset(this->page_buf, 0xff, mtd->oobsize);
- memcpy(this->page_buf + column, buf, thislen);
- this->write_bufferram(mtd, ONENAND_SPARERAM, this->page_buf, 0, mtd->oobsize);
+ column = to & (mtd->writesize - 1);
- this->command(mtd, ONENAND_CMD_PROGOOB, to, mtd->oobsize);
+ /* Loop until all data write */
+ while (1) {
+ if (written < len) {
+ u_char *wbuf = (u_char *) buf;
- onenand_update_bufferram(mtd, to, 0);
+ thislen = min_t(int, mtd->writesize - column, len - written);
+ thisooblen = min_t(int, oobsize - oobcolumn, ooblen - oobwritten);
- ret = this->wait(mtd, FL_WRITING);
- if (ret) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_write_oob: write filaed %d\n", ret);
- goto out;
- }
+ cond_resched();
- ret = onenand_verify_oob(mtd, buf, to, thislen);
- if (ret) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_write_oob: verify failed %d\n", ret);
- goto out;
- }
+ this->command(mtd, ONENAND_CMD_BUFFERRAM, to, thislen);
- written += thislen;
+ /* Partial page write */
+ subpage = thislen < mtd->writesize;
+ if (subpage) {
+ memset(this->page_buf, 0xff, mtd->writesize);
+ memcpy(this->page_buf + column, buf, thislen);
+ wbuf = this->page_buf;
+ }
- if (written == len)
- break;
+ this->write_bufferram(mtd, ONENAND_DATARAM, wbuf, 0, mtd->writesize);
+
+ if (oob) {
+ oobbuf = this->oob_buf;
+
+ /* We send data to spare ram with oobsize
+ * to prevent byte access */
+ memset(oobbuf, 0xff, mtd->oobsize);
+ if (ops->mode == MTD_OOB_AUTO)
+ onenand_fill_auto_oob(mtd, oobbuf, oob, oobcolumn, thisooblen);
+ else
+ memcpy(oobbuf + oobcolumn, oob, thisooblen);
+
+ oobwritten += thisooblen;
+ oob += thisooblen;
+ oobcolumn = 0;
+ } else
+ oobbuf = (u_char *) ffchars;
+
+ this->write_bufferram(mtd, ONENAND_SPARERAM, oobbuf, 0, mtd->oobsize);
+ } else
+ ONENAND_SET_NEXT_BUFFERRAM(this);
+
+ /*
+ * 2 PLANE, MLC, and Flex-OneNAND do not support
+ * write-while-program feature.
+ */
+ if (!ONENAND_IS_2PLANE(this) && !first) {
+ ONENAND_SET_PREV_BUFFERRAM(this);
+
+ ret = this->wait(mtd, FL_WRITING);
+
+ /* In partial page write we don't update bufferram */
+ onenand_update_bufferram(mtd, prev, !ret && !prev_subpage);
+ if (ret) {
+ written -= prevlen;
+ printk(KERN_ERR "onenand_write_ops_nolock: write failed %d\n", ret);
+ break;
+ }
+
+ if (written == len) {
+ /* Only check verify write turn on */
+ ret = onenand_verify(mtd, buf - len, to - len, len);
+ if (ret)
+ printk(KERN_ERR "onenand_write_ops_nolock: verify failed %d\n", ret);
+ break;
+ }
+
+ ONENAND_SET_NEXT_BUFFERRAM(this);
+ }
+
+ this->command(mtd, ONENAND_CMD_PROG, to, mtd->writesize);
+
+ /*
+ * 2 PLANE, MLC, and Flex-OneNAND wait here
+ */
+ if (ONENAND_IS_2PLANE(this)) {
+ ret = this->wait(mtd, FL_WRITING);
+
+ /* In partial page write we don't update bufferram */
+ onenand_update_bufferram(mtd, to, !ret && !subpage);
+ if (ret) {
+ printk(KERN_ERR "onenand_write_ops_nolock: write failed %d\n", ret);
+ break;
+ }
+
+ /* Only check verify write turn on */
+ ret = onenand_verify(mtd, buf, to, thislen);
+ if (ret) {
+ printk(KERN_ERR "onenand_write_ops_nolock: verify failed %d\n", ret);
+ break;
+ }
+
+ written += thislen;
+ if (written == len)
+ break;
+
+ } else
+ written += thislen;
+
+ column = 0;
+ prev_subpage = subpage;
+ prev = to;
+ prevlen = thislen;
to += thislen;
buf += thislen;
+ first = 0;
}
-out:
- /* Deselect and wake up anyone waiting on the device */
- onenand_release_device(mtd);
+ /* In error case, clear all bufferrams */
+ if (written != len)
+ onenand_invalidate_bufferram(mtd, 0, -1);
- *retlen = written;
+ ops->retlen = written;
+ ops->oobretlen = oobwritten;
return ret;
}
+
/**
- * onenand_writev_ecc - [MTD Interface] write with iovec with ecc
+ * onenand_write_oob_nolock - [Internal] OneNAND write out-of-band
* @param mtd MTD device structure
- * @param vecs the iovectors to write
- * @param count number of vectors
* @param to offset to write to
+ * @param len number of bytes to write
* @param retlen pointer to variable to store the number of written bytes
- * @param eccbuf filesystem supplied oob data buffer
- * @param oobsel oob selection structure
+ * @param buf the data to write
+ * @param mode operation mode
*
- * OneNAND write with iovec with ecc
+ * OneNAND write out-of-band
*/
-static int onenand_writev_ecc(struct mtd_info *mtd, const struct kvec *vecs,
- unsigned long count, loff_t to, size_t *retlen,
- u_char *eccbuf, struct nand_oobinfo *oobsel)
+static int onenand_write_oob_nolock(struct mtd_info *mtd, loff_t to,
+ struct mtd_oob_ops *ops)
{
struct onenand_chip *this = mtd->priv;
- unsigned char *pbuf;
- size_t total_len, len;
- int i, written = 0;
- int ret = 0;
+ int column, ret = 0, oobsize;
+ int written = 0, oobcmd;
+ u_char *oobbuf;
+ size_t len = ops->ooblen;
+ const u_char *buf = ops->oobbuf;
+ mtd_oob_mode_t mode = ops->mode;
- /* Preset written len for early exit */
- *retlen = 0;
+ to += ops->ooboffs;
- /* Calculate total length of data */
- total_len = 0;
- for (i = 0; i < count; i++)
- total_len += vecs[i].iov_len;
+ DEBUG(MTD_DEBUG_LEVEL3, "onenand_write_oob_nolock: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len);
- DEBUG(MTD_DEBUG_LEVEL3, "onenand_writev_ecc: to = 0x%08x, len = %i, count = %ld\n", (unsigned int) to, (unsigned int) total_len, count);
+ /* Initialize retlen, in case of early exit */
+ ops->oobretlen = 0;
- /* Do not allow write past end of the device */
- if (unlikely((to + total_len) > mtd->size)) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_writev_ecc: Attempted write past end of device\n");
+ if (mode == MTD_OOB_AUTO)
+ oobsize = this->ecclayout->oobavail;
+ else
+ oobsize = mtd->oobsize;
+
+ column = to & (mtd->oobsize - 1);
+
+ if (unlikely(column >= oobsize)) {
+ printk(KERN_ERR "onenand_write_oob_nolock: Attempted to start write outside oob\n");
return -EINVAL;
}
- /* Reject writes, which are not page aligned */
- if (unlikely(NOTALIGNED(to)) || unlikely(NOTALIGNED(total_len))) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_writev_ecc: Attempt to write not page aligned data\n");
- return -EINVAL;
- }
+ /* For compatibility with NAND: Do not allow write past end of page */
+ if (unlikely(column + len > oobsize)) {
+ printk(KERN_ERR "onenand_write_oob_nolock: "
+ "Attempt to write past end of page\n");
+ return -EINVAL;
+ }
- /* Grab the lock and see if the device is available */
- onenand_get_device(mtd, FL_WRITING);
+ /* Do not allow reads past end of device */
+ if (unlikely(to >= mtd->size ||
+ column + len > ((mtd->size >> this->page_shift) -
+ (to >> this->page_shift)) * oobsize)) {
+ printk(KERN_ERR "onenand_write_oob_nolock: Attempted to write past end of device\n");
+ return -EINVAL;
+ }
- /* TODO handling oob */
+ oobbuf = this->oob_buf;
- /* Loop until all keve's data has been written */
- len = 0;
- while (count) {
- pbuf = this->page_buf;
- /*
- * If the given tuple is >= pagesize then
- * write it out from the iov
- */
- if ((vecs->iov_len - len) >= mtd->oobblock) {
- pbuf = vecs->iov_base + len;
+ oobcmd = ONENAND_IS_MLC(this) ? ONENAND_CMD_PROG : ONENAND_CMD_PROGOOB;
- len += mtd->oobblock;
+ /* Loop until all data write */
+ while (written < len) {
+ int thislen = min_t(int, oobsize, len - written);
- /* Check, if we have to switch to the next tuple */
- if (len >= (int) vecs->iov_len) {
- vecs++;
- len = 0;
- count--;
- }
- } else {
- int cnt = 0, thislen;
- while (cnt < mtd->oobblock) {
- thislen = min_t(int, mtd->oobblock - cnt, vecs->iov_len - len);
- memcpy(this->page_buf + cnt, vecs->iov_base + len, thislen);
- cnt += thislen;
- len += thislen;
-
- /* Check, if we have to switch to the next tuple */
- if (len >= (int) vecs->iov_len) {
- vecs++;
- len = 0;
- count--;
- }
- }
- }
+ cond_resched();
- this->command(mtd, ONENAND_CMD_BUFFERRAM, to, mtd->oobblock);
+ this->command(mtd, ONENAND_CMD_BUFFERRAM, to, mtd->oobsize);
- this->write_bufferram(mtd, ONENAND_DATARAM, pbuf, 0, mtd->oobblock);
- this->write_bufferram(mtd, ONENAND_SPARERAM, ffchars, 0, mtd->oobsize);
+ /* We send data to spare ram with oobsize
+ * to prevent byte access */
+ memset(oobbuf, 0xff, mtd->oobsize);
+ if (mode == MTD_OOB_AUTO)
+ onenand_fill_auto_oob(mtd, oobbuf, buf, column, thislen);
+ else
+ memcpy(oobbuf + column, buf, thislen);
+ this->write_bufferram(mtd, ONENAND_SPARERAM, oobbuf, 0, mtd->oobsize);
+
+ if (ONENAND_IS_MLC(this)) {
+ /* Set main area of DataRAM to 0xff*/
+ memset(this->page_buf, 0xff, mtd->writesize);
+ this->write_bufferram(mtd, ONENAND_DATARAM,
+ this->page_buf, 0, mtd->writesize);
+ }
- this->command(mtd, ONENAND_CMD_PROG, to, mtd->oobblock);
+ this->command(mtd, oobcmd, to, mtd->oobsize);
- onenand_update_bufferram(mtd, to, 1);
+ onenand_update_bufferram(mtd, to, 0);
+ if (ONENAND_IS_2PLANE(this)) {
+ ONENAND_SET_BUFFERRAM1(this);
+ onenand_update_bufferram(mtd, to + this->writesize, 0);
+ }
ret = this->wait(mtd, FL_WRITING);
if (ret) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_writev_ecc: write failed %d\n", ret);
- goto out;
+ printk(KERN_ERR "onenand_write_oob_nolock: write failed %d\n", ret);
+ break;
}
-
- /* Only check verify write turn on */
- ret = onenand_verify_page(mtd, (u_char *) pbuf, to);
+ ret = onenand_verify_oob(mtd, oobbuf, to);
if (ret) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_writev_ecc: verify failed %d\n", ret);
- goto out;
+ printk(KERN_ERR "onenand_write_oob_nolock: verify failed %d\n", ret);
+ break;
}
- written += mtd->oobblock;
+ written += thislen;
+ if (written == len)
+ break;
- to += mtd->oobblock;
+ to += mtd->writesize;
+ buf += thislen;
+ column = 0;
}
-out:
- /* Deselect and wakt up anyone waiting on the device */
- onenand_release_device(mtd);
-
- *retlen = written;
+ ops->oobretlen = written;
- return 0;
+ return ret;
}
/**
- * onenand_writev - [MTD Interface] compabilty function for onenand_writev_ecc
+ * onenand_write - [MTD Interface] write buffer to FLASH
* @param mtd MTD device structure
- * @param vecs the iovectors to write
- * @param count number of vectors
* @param to offset to write to
+ * @param len number of bytes to write
* @param retlen pointer to variable to store the number of written bytes
+ * @param buf the data to write
*
- * OneNAND write with kvec. This just calls the ecc function
+ * Write with ECC
*/
-static int onenand_writev(struct mtd_info *mtd, const struct kvec *vecs,
- unsigned long count, loff_t to, size_t *retlen)
+static int onenand_write(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t *retlen, const u_char *buf)
{
- return onenand_writev_ecc(mtd, vecs, count, to, retlen, NULL, NULL);
+ struct mtd_oob_ops ops = {
+ .len = len,
+ .ooblen = 0,
+ .datbuf = (u_char *) buf,
+ .oobbuf = NULL,
+ };
+ int ret;
+
+ onenand_get_device(mtd, FL_WRITING);
+ ret = onenand_write_ops_nolock(mtd, to, &ops);
+ onenand_release_device(mtd);
+
+ *retlen = ops.retlen;
+ return ret;
}
/**
- * onenand_block_checkbad - [GENERIC] Check if a block is marked bad
+ * onenand_write_oob - [MTD Interface] NAND write data and/or out-of-band
+ * @param mtd: MTD device structure
+ * @param to: offset to write
+ * @param ops: oob operation description structure
+ */
+static int onenand_write_oob(struct mtd_info *mtd, loff_t to,
+ struct mtd_oob_ops *ops)
+{
+ int ret;
+
+ switch (ops->mode) {
+ case MTD_OOB_PLACE:
+ case MTD_OOB_AUTO:
+ break;
+ case MTD_OOB_RAW:
+ /* Not implemented yet */
+ default:
+ return -EINVAL;
+ }
+
+ onenand_get_device(mtd, FL_WRITING);
+ if (ops->datbuf)
+ ret = onenand_write_ops_nolock(mtd, to, ops);
+ else
+ ret = onenand_write_oob_nolock(mtd, to, ops);
+ onenand_release_device(mtd);
+
+ return ret;
+}
+
+/**
+ * onenand_block_isbad_nolock - [GENERIC] Check if a block is marked bad
* @param mtd MTD device structure
* @param ofs offset from device start
- * @param getchip 0, if the chip is already selected
* @param allowbbt 1, if its allowed to access the bbt area
*
* Check, if the block is bad. Either by reading the bad block table or
* calling of the scan function.
*/
-static int onenand_block_checkbad(struct mtd_info *mtd, loff_t ofs, int getchip, int allowbbt)
+static int onenand_block_isbad_nolock(struct mtd_info *mtd, loff_t ofs, int allowbbt)
{
struct onenand_chip *this = mtd->priv;
struct bbm_info *bbm = this->bbm;
{
struct onenand_chip *this = mtd->priv;
unsigned int block_size;
- loff_t addr;
- int len;
- int ret = 0;
-
- DEBUG(MTD_DEBUG_LEVEL3, "onenand_erase: start = 0x%08x, len = %i\n", (unsigned int) instr->addr, (unsigned int) instr->len);
+ loff_t addr = instr->addr;
+ loff_t len = instr->len;
+ int ret = 0, i;
+ struct mtd_erase_region_info *region = NULL;
+ loff_t region_end = 0;
- block_size = (1 << this->erase_shift);
+ DEBUG(MTD_DEBUG_LEVEL3, "onenand_erase: start = 0x%012llx, len = %llu\n", (unsigned long long) instr->addr, (unsigned long long) instr->len);
- /* Start address must align on block boundary */
- if (unlikely(instr->addr & (block_size - 1))) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_erase: Unaligned address\n");
+ /* Do not allow erase past end of device */
+ if (unlikely((len + addr) > mtd->size)) {
+ printk(KERN_ERR "onenand_erase: Erase past end of device\n");
return -EINVAL;
}
- /* Length must align on block boundary */
- if (unlikely(instr->len & (block_size - 1))) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_erase: Length not block aligned\n");
- return -EINVAL;
+ if (FLEXONENAND(this)) {
+ /* Find the eraseregion of this address */
+ i = flexonenand_region(mtd, addr);
+ region = &mtd->eraseregions[i];
+
+ block_size = region->erasesize;
+ region_end = region->offset + region->erasesize * region->numblocks;
+
+ /* Start address within region must align on block boundary.
+ * Erase region's start offset is always block start address.
+ */
+ if (unlikely((addr - region->offset) & (block_size - 1))) {
+ printk(KERN_ERR "onenand_erase: Unaligned address\n");
+ return -EINVAL;
+ }
+ } else {
+ block_size = 1 << this->erase_shift;
+
+ /* Start address must align on block boundary */
+ if (unlikely(addr & (block_size - 1))) {
+ printk(KERN_ERR "onenand_erase: Unaligned address\n");
+ return -EINVAL;
+ }
}
- /* Do not allow erase past end of device */
- if (unlikely((instr->len + instr->addr) > mtd->size)) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_erase: Erase past end of device\n");
+ /* Length must align on block boundary */
+ if (unlikely(len & (block_size - 1))) {
+ printk(KERN_ERR "onenand_erase: Length not block aligned\n");
return -EINVAL;
}
- instr->fail_addr = 0xffffffff;
+ instr->fail_addr = MTD_FAIL_ADDR_UNKNOWN;
/* Grab the lock and see if the device is available */
onenand_get_device(mtd, FL_ERASING);
- /* Loop throught the pages */
- len = instr->len;
- addr = instr->addr;
-
+ /* Loop through the blocks */
instr->state = MTD_ERASING;
while (len) {
+ cond_resched();
/* Check if we have a bad block, we do not erase bad blocks */
- if (onenand_block_checkbad(mtd, addr, 0, 0)) {
- printk (KERN_WARNING "onenand_erase: attempt to erase a bad block at addr 0x%08x\n", (unsigned int) addr);
+ if (onenand_block_isbad_nolock(mtd, addr, 0)) {
+ printk (KERN_WARNING "onenand_erase: attempt to erase a bad block at addr 0x%012llx\n", (unsigned long long) addr);
instr->state = MTD_ERASE_FAILED;
goto erase_exit;
}
this->command(mtd, ONENAND_CMD_ERASE, addr, block_size);
+ onenand_invalidate_bufferram(mtd, addr, block_size);
+
ret = this->wait(mtd, FL_ERASING);
/* Check, if it is write protected */
if (ret) {
- if (ret == -EPERM)
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_erase: Device is write protected!!!\n");
- else
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_erase: Failed erase, block %d\n", (unsigned) (addr >> this->erase_shift));
+ printk(KERN_ERR "onenand_erase: Failed erase, block %d\n",
+ onenand_block(this, addr));
instr->state = MTD_ERASE_FAILED;
instr->fail_addr = addr;
goto erase_exit;
}
- len -= block_size;
- addr += block_size;
- }
+ len -= block_size;
+ addr += block_size;
+
+ if (addr == region_end) {
+ if (!len)
+ break;
+ region++;
+
+ block_size = region->erasesize;
+ region_end = region->offset + region->erasesize * region->numblocks;
+
+ if (len & (block_size - 1)) {
+ /* FIXME: This should be handled at MTD partitioning level. */
+ printk(KERN_ERR "onenand_erase: Unaligned address\n");
+ goto erase_exit;
+ }
+ }
+
+ }
+
+ instr->state = MTD_ERASE_DONE;
+
+erase_exit:
+
+ ret = instr->state == MTD_ERASE_DONE ? 0 : -EIO;
+
+ /* Deselect and wake up anyone waiting on the device */
+ onenand_release_device(mtd);
+
+ /* Do call back function */
+ if (!ret)
+ mtd_erase_callback(instr);
+
+ return ret;
+}
+
+/**
+ * onenand_sync - [MTD Interface] sync
+ * @param mtd MTD device structure
+ *
+ * Sync is actually a wait for chip ready function
+ */
+static void onenand_sync(struct mtd_info *mtd)
+{
+ DEBUG(MTD_DEBUG_LEVEL3, "onenand_sync: called\n");
+
+ /* Grab the lock and see if the device is available */
+ onenand_get_device(mtd, FL_SYNCING);
+
+ /* Release it and go back */
+ onenand_release_device(mtd);
+}
+
+/**
+ * onenand_block_isbad - [MTD Interface] Check whether the block at the given offset is bad
+ * @param mtd MTD device structure
+ * @param ofs offset relative to mtd start
+ *
+ * Check whether the block is bad
+ */
+static int onenand_block_isbad(struct mtd_info *mtd, loff_t ofs)
+{
+ int ret;
+
+ /* Check for invalid offset */
+ if (ofs > mtd->size)
+ return -EINVAL;
+
+ onenand_get_device(mtd, FL_READING);
+ ret = onenand_block_isbad_nolock(mtd, ofs, 0);
+ onenand_release_device(mtd);
+ return ret;
+}
+
+/**
+ * onenand_default_block_markbad - [DEFAULT] mark a block bad
+ * @param mtd MTD device structure
+ * @param ofs offset from device start
+ *
+ * This is the default implementation, which can be overridden by
+ * a hardware specific driver.
+ */
+static int onenand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
+{
+ struct onenand_chip *this = mtd->priv;
+ struct bbm_info *bbm = this->bbm;
+ u_char buf[2] = {0, 0};
+ struct mtd_oob_ops ops = {
+ .mode = MTD_OOB_PLACE,
+ .ooblen = 2,
+ .oobbuf = buf,
+ .ooboffs = 0,
+ };
+ int block;
+
+ /* Get block number */
+ block = onenand_block(this, ofs);
+ if (bbm->bbt)
+ bbm->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
+
+ /* We write two bytes, so we don't have to mess with 16-bit access */
+ ofs += mtd->oobsize + (bbm->badblockpos & ~0x01);
+ /* FIXME : What to do when marking SLC block in partition
+ * with MLC erasesize? For now, it is not advisable to
+ * create partitions containing both SLC and MLC regions.
+ */
+ return onenand_write_oob_nolock(mtd, ofs, &ops);
+}
+
+/**
+ * onenand_block_markbad - [MTD Interface] Mark the block at the given offset as bad
+ * @param mtd MTD device structure
+ * @param ofs offset relative to mtd start
+ *
+ * Mark the block as bad
+ */
+static int onenand_block_markbad(struct mtd_info *mtd, loff_t ofs)
+{
+ struct onenand_chip *this = mtd->priv;
+ int ret;
+
+ ret = onenand_block_isbad(mtd, ofs);
+ if (ret) {
+ /* If it was bad already, return success and do nothing */
+ if (ret > 0)
+ return 0;
+ return ret;
+ }
+
+ onenand_get_device(mtd, FL_WRITING);
+ ret = this->block_markbad(mtd, ofs);
+ onenand_release_device(mtd);
+ return ret;
+}
+
+/**
+ * onenand_do_lock_cmd - [OneNAND Interface] Lock or unlock block(s)
+ * @param mtd MTD device structure
+ * @param ofs offset relative to mtd start
+ * @param len number of bytes to lock or unlock
+ * @param cmd lock or unlock command
+ *
+ * Lock or unlock one or more blocks
+ */
+static int onenand_do_lock_cmd(struct mtd_info *mtd, loff_t ofs, size_t len, int cmd)
+{
+ struct onenand_chip *this = mtd->priv;
+ int start, end, block, value, status;
+ int wp_status_mask;
+
+ start = onenand_block(this, ofs);
+ end = onenand_block(this, ofs + len) - 1;
+
+ if (cmd == ONENAND_CMD_LOCK)
+ wp_status_mask = ONENAND_WP_LS;
+ else
+ wp_status_mask = ONENAND_WP_US;
+
+ /* Continuous lock scheme */
+ if (this->options & ONENAND_HAS_CONT_LOCK) {
+ /* Set start block address */
+ this->write_word(start, this->base + ONENAND_REG_START_BLOCK_ADDRESS);
+ /* Set end block address */
+ this->write_word(end, this->base + ONENAND_REG_END_BLOCK_ADDRESS);
+ /* Write lock command */
+ this->command(mtd, cmd, 0, 0);
+
+ /* There's no return value */
+ this->wait(mtd, FL_LOCKING);
+
+ /* Sanity check */
+ while (this->read_word(this->base + ONENAND_REG_CTRL_STATUS)
+ & ONENAND_CTRL_ONGO)
+ continue;
+
+ /* Check lock status */
+ status = this->read_word(this->base + ONENAND_REG_WP_STATUS);
+ if (!(status & wp_status_mask))
+ printk(KERN_ERR "wp status = 0x%x\n", status);
+
+ return 0;
+ }
+
+ /* Block lock scheme */
+ for (block = start; block < end + 1; block++) {
+ /* Set block address */
+ value = onenand_block_address(this, block);
+ this->write_word(value, this->base + ONENAND_REG_START_ADDRESS1);
+ /* Select DataRAM for DDP */
+ value = onenand_bufferram_address(this, block);
+ this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2);
+ /* Set start block address */
+ this->write_word(block, this->base + ONENAND_REG_START_BLOCK_ADDRESS);
+ /* Write lock command */
+ this->command(mtd, cmd, 0, 0);
+
+ /* There's no return value */
+ this->wait(mtd, FL_LOCKING);
+
+ /* Sanity check */
+ while (this->read_word(this->base + ONENAND_REG_CTRL_STATUS)
+ & ONENAND_CTRL_ONGO)
+ continue;
+
+ /* Check lock status */
+ status = this->read_word(this->base + ONENAND_REG_WP_STATUS);
+ if (!(status & wp_status_mask))
+ printk(KERN_ERR "block = %d, wp status = 0x%x\n", block, status);
+ }
+
+ return 0;
+}
+
+/**
+ * onenand_lock - [MTD Interface] Lock block(s)
+ * @param mtd MTD device structure
+ * @param ofs offset relative to mtd start
+ * @param len number of bytes to unlock
+ *
+ * Lock one or more blocks
+ */
+static int onenand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+{
+ int ret;
+
+ onenand_get_device(mtd, FL_LOCKING);
+ ret = onenand_do_lock_cmd(mtd, ofs, len, ONENAND_CMD_LOCK);
+ onenand_release_device(mtd);
+ return ret;
+}
+
+/**
+ * onenand_unlock - [MTD Interface] Unlock block(s)
+ * @param mtd MTD device structure
+ * @param ofs offset relative to mtd start
+ * @param len number of bytes to unlock
+ *
+ * Unlock one or more blocks
+ */
+static int onenand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+{
+ int ret;
+
+ onenand_get_device(mtd, FL_LOCKING);
+ ret = onenand_do_lock_cmd(mtd, ofs, len, ONENAND_CMD_UNLOCK);
+ onenand_release_device(mtd);
+ return ret;
+}
+
+/**
+ * onenand_check_lock_status - [OneNAND Interface] Check lock status
+ * @param this onenand chip data structure
+ *
+ * Check lock status
+ */
+static int onenand_check_lock_status(struct onenand_chip *this)
+{
+ unsigned int value, block, status;
+ unsigned int end;
+
+ end = this->chipsize >> this->erase_shift;
+ for (block = 0; block < end; block++) {
+ /* Set block address */
+ value = onenand_block_address(this, block);
+ this->write_word(value, this->base + ONENAND_REG_START_ADDRESS1);
+ /* Select DataRAM for DDP */
+ value = onenand_bufferram_address(this, block);
+ this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2);
+ /* Set start block address */
+ this->write_word(block, this->base + ONENAND_REG_START_BLOCK_ADDRESS);
+
+ /* Check lock status */
+ status = this->read_word(this->base + ONENAND_REG_WP_STATUS);
+ if (!(status & ONENAND_WP_US)) {
+ printk(KERN_ERR "block = %d, wp status = 0x%x\n", block, status);
+ return 0;
+ }
+ }
+
+ return 1;
+}
+
+/**
+ * onenand_unlock_all - [OneNAND Interface] unlock all blocks
+ * @param mtd MTD device structure
+ *
+ * Unlock all blocks
+ */
+static void onenand_unlock_all(struct mtd_info *mtd)
+{
+ struct onenand_chip *this = mtd->priv;
+ loff_t ofs = 0;
+ loff_t len = mtd->size;
+
+ if (this->options & ONENAND_HAS_UNLOCK_ALL) {
+ /* Set start block address */
+ this->write_word(0, this->base + ONENAND_REG_START_BLOCK_ADDRESS);
+ /* Write unlock command */
+ this->command(mtd, ONENAND_CMD_UNLOCK_ALL, 0, 0);
+
+ /* There's no return value */
+ this->wait(mtd, FL_LOCKING);
+
+ /* Sanity check */
+ while (this->read_word(this->base + ONENAND_REG_CTRL_STATUS)
+ & ONENAND_CTRL_ONGO)
+ continue;
+
+ /* Don't check lock status */
+ if (this->options & ONENAND_SKIP_UNLOCK_CHECK)
+ return;
+
+ /* Check lock status */
+ if (onenand_check_lock_status(this))
+ return;
+
+ /* Workaround for all block unlock in DDP */
+ if (ONENAND_IS_DDP(this) && !FLEXONENAND(this)) {
+ /* All blocks on another chip */
+ ofs = this->chipsize >> 1;
+ len = this->chipsize >> 1;
+ }
+ }
+
+ onenand_do_lock_cmd(mtd, ofs, len, ONENAND_CMD_UNLOCK);
+}
+
+#ifdef CONFIG_MTD_ONENAND_OTP
+
+/* Internal OTP operation */
+typedef int (*otp_op_t)(struct mtd_info *mtd, loff_t form, size_t len,
+ size_t *retlen, u_char *buf);
+
+/**
+ * do_otp_read - [DEFAULT] Read OTP block area
+ * @param mtd MTD device structure
+ * @param from The offset to read
+ * @param len number of bytes to read
+ * @param retlen pointer to variable to store the number of readbytes
+ * @param buf the databuffer to put/get data
+ *
+ * Read OTP block area.
+ */
+static int do_otp_read(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, u_char *buf)
+{
+ struct onenand_chip *this = mtd->priv;
+ struct mtd_oob_ops ops = {
+ .len = len,
+ .ooblen = 0,
+ .datbuf = buf,
+ .oobbuf = NULL,
+ };
+ int ret;
+
+ /* Enter OTP access mode */
+ this->command(mtd, ONENAND_CMD_OTP_ACCESS, 0, 0);
+ this->wait(mtd, FL_OTPING);
+
+ ret = ONENAND_IS_MLC(this) ?
+ onenand_mlc_read_ops_nolock(mtd, from, &ops) :
+ onenand_read_ops_nolock(mtd, from, &ops);
+
+ /* Exit OTP access mode */
+ this->command(mtd, ONENAND_CMD_RESET, 0, 0);
+ this->wait(mtd, FL_RESETING);
+
+ return ret;
+}
+
+/**
+ * do_otp_write - [DEFAULT] Write OTP block area
+ * @param mtd MTD device structure
+ * @param to The offset to write
+ * @param len number of bytes to write
+ * @param retlen pointer to variable to store the number of write bytes
+ * @param buf the databuffer to put/get data
+ *
+ * Write OTP block area.
+ */
+static int do_otp_write(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t *retlen, u_char *buf)
+{
+ struct onenand_chip *this = mtd->priv;
+ unsigned char *pbuf = buf;
+ int ret;
+ struct mtd_oob_ops ops;
+
+ /* Force buffer page aligned */
+ if (len < mtd->writesize) {
+ memcpy(this->page_buf, buf, len);
+ memset(this->page_buf + len, 0xff, mtd->writesize - len);
+ pbuf = this->page_buf;
+ len = mtd->writesize;
+ }
+
+ /* Enter OTP access mode */
+ this->command(mtd, ONENAND_CMD_OTP_ACCESS, 0, 0);
+ this->wait(mtd, FL_OTPING);
+
+ ops.len = len;
+ ops.ooblen = 0;
+ ops.datbuf = pbuf;
+ ops.oobbuf = NULL;
+ ret = onenand_write_ops_nolock(mtd, to, &ops);
+ *retlen = ops.retlen;
+
+ /* Exit OTP access mode */
+ this->command(mtd, ONENAND_CMD_RESET, 0, 0);
+ this->wait(mtd, FL_RESETING);
+
+ return ret;
+}
+
+/**
+ * do_otp_lock - [DEFAULT] Lock OTP block area
+ * @param mtd MTD device structure
+ * @param from The offset to lock
+ * @param len number of bytes to lock
+ * @param retlen pointer to variable to store the number of lock bytes
+ * @param buf the databuffer to put/get data
+ *
+ * Lock OTP block area.
+ */
+static int do_otp_lock(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, u_char *buf)
+{
+ struct onenand_chip *this = mtd->priv;
+ struct mtd_oob_ops ops;
+ int ret;
+
+ /* Enter OTP access mode */
+ this->command(mtd, ONENAND_CMD_OTP_ACCESS, 0, 0);
+ this->wait(mtd, FL_OTPING);
+
+ if (FLEXONENAND(this)) {
+ /*
+ * For Flex-OneNAND, we write lock mark to 1st word of sector 4 of
+ * main area of page 49.
+ */
+ ops.len = mtd->writesize;
+ ops.ooblen = 0;
+ ops.datbuf = buf;
+ ops.oobbuf = NULL;
+ ret = onenand_write_ops_nolock(mtd, mtd->writesize * 49, &ops);
+ *retlen = ops.retlen;
+ } else {
+ ops.mode = MTD_OOB_PLACE;
+ ops.ooblen = len;
+ ops.oobbuf = buf;
+ ops.ooboffs = 0;
+ ret = onenand_write_oob_nolock(mtd, from, &ops);
+ *retlen = ops.oobretlen;
+ }
+
+ /* Exit OTP access mode */
+ this->command(mtd, ONENAND_CMD_RESET, 0, 0);
+ this->wait(mtd, FL_RESETING);
+
+ return ret;
+}
+
+/**
+ * onenand_otp_walk - [DEFAULT] Handle OTP operation
+ * @param mtd MTD device structure
+ * @param from The offset to read/write
+ * @param len number of bytes to read/write
+ * @param retlen pointer to variable to store the number of read bytes
+ * @param buf the databuffer to put/get data
+ * @param action do given action
+ * @param mode specify user and factory
+ *
+ * Handle OTP operation.
+ */
+static int onenand_otp_walk(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, u_char *buf,
+ otp_op_t action, int mode)
+{
+ struct onenand_chip *this = mtd->priv;
+ int otp_pages;
+ int density;
+ int ret = 0;
+
+ *retlen = 0;
+
+ density = onenand_get_density(this->device_id);
+ if (density < ONENAND_DEVICE_DENSITY_512Mb)
+ otp_pages = 20;
+ else
+ otp_pages = 10;
+
+ if (mode == MTD_OTP_FACTORY) {
+ from += mtd->writesize * otp_pages;
+ otp_pages = 64 - otp_pages;
+ }
+
+ /* Check User/Factory boundary */
+ if (((mtd->writesize * otp_pages) - (from + len)) < 0)
+ return 0;
+
+ onenand_get_device(mtd, FL_OTPING);
+ while (len > 0 && otp_pages > 0) {
+ if (!action) { /* OTP Info functions */
+ struct otp_info *otpinfo;
+
+ len -= sizeof(struct otp_info);
+ if (len <= 0) {
+ ret = -ENOSPC;
+ break;
+ }
+
+ otpinfo = (struct otp_info *) buf;
+ otpinfo->start = from;
+ otpinfo->length = mtd->writesize;
+ otpinfo->locked = 0;
- instr->state = MTD_ERASE_DONE;
+ from += mtd->writesize;
+ buf += sizeof(struct otp_info);
+ *retlen += sizeof(struct otp_info);
+ } else {
+ size_t tmp_retlen;
+ int size = len;
-erase_exit:
+ ret = action(mtd, from, len, &tmp_retlen, buf);
- ret = instr->state == MTD_ERASE_DONE ? 0 : -EIO;
- /* Do call back function */
- if (!ret)
- mtd_erase_callback(instr);
+ buf += size;
+ len -= size;
+ *retlen += size;
- /* Deselect and wake up anyone waiting on the device */
+ if (ret)
+ break;
+ }
+ otp_pages--;
+ }
onenand_release_device(mtd);
return ret;
}
/**
- * onenand_sync - [MTD Interface] sync
+ * onenand_get_fact_prot_info - [MTD Interface] Read factory OTP info
* @param mtd MTD device structure
+ * @param buf the databuffer to put/get data
+ * @param len number of bytes to read
*
- * Sync is actually a wait for chip ready function
+ * Read factory OTP info.
*/
-static void onenand_sync(struct mtd_info *mtd)
+static int onenand_get_fact_prot_info(struct mtd_info *mtd,
+ struct otp_info *buf, size_t len)
{
- DEBUG(MTD_DEBUG_LEVEL3, "onenand_sync: called\n");
+ size_t retlen;
+ int ret;
- /* Grab the lock and see if the device is available */
- onenand_get_device(mtd, FL_SYNCING);
+ ret = onenand_otp_walk(mtd, 0, len, &retlen, (u_char *) buf, NULL, MTD_OTP_FACTORY);
- /* Release it and go back */
- onenand_release_device(mtd);
+ return ret ? : retlen;
}
-
/**
- * onenand_block_isbad - [MTD Interface] Check whether the block at the given offset is bad
+ * onenand_read_fact_prot_reg - [MTD Interface] Read factory OTP area
* @param mtd MTD device structure
- * @param ofs offset relative to mtd start
+ * @param from The offset to read
+ * @param len number of bytes to read
+ * @param retlen pointer to variable to store the number of read bytes
+ * @param buf the databuffer to put/get data
*
- * Check whether the block is bad
+ * Read factory OTP area.
*/
-static int onenand_block_isbad(struct mtd_info *mtd, loff_t ofs)
+static int onenand_read_fact_prot_reg(struct mtd_info *mtd, loff_t from,
+ size_t len, size_t *retlen, u_char *buf)
{
- /* Check for invalid offset */
- if (ofs > mtd->size)
- return -EINVAL;
-
- return onenand_block_checkbad(mtd, ofs, 1, 0);
+ return onenand_otp_walk(mtd, from, len, retlen, buf, do_otp_read, MTD_OTP_FACTORY);
}
/**
- * onenand_default_block_markbad - [DEFAULT] mark a block bad
+ * onenand_get_user_prot_info - [MTD Interface] Read user OTP info
* @param mtd MTD device structure
- * @param ofs offset from device start
+ * @param buf the databuffer to put/get data
+ * @param len number of bytes to read
*
- * This is the default implementation, which can be overridden by
- * a hardware specific driver.
+ * Read user OTP info.
*/
-static int onenand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
+static int onenand_get_user_prot_info(struct mtd_info *mtd,
+ struct otp_info *buf, size_t len)
{
- struct onenand_chip *this = mtd->priv;
- struct bbm_info *bbm = this->bbm;
- u_char buf[2] = {0, 0};
size_t retlen;
- int block;
+ int ret;
- /* Get block number */
- block = ((int) ofs) >> bbm->bbt_erase_shift;
- if (bbm->bbt)
- bbm->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
+ ret = onenand_otp_walk(mtd, 0, len, &retlen, (u_char *) buf, NULL, MTD_OTP_USER);
- /* We write two bytes, so we dont have to mess with 16 bit access */
- ofs += mtd->oobsize + (bbm->badblockpos & ~0x01);
- return mtd->write_oob(mtd, ofs , 2, &retlen, buf);
+ return ret ? : retlen;
}
/**
- * onenand_block_markbad - [MTD Interface] Mark the block at the given offset as bad
+ * onenand_read_user_prot_reg - [MTD Interface] Read user OTP area
* @param mtd MTD device structure
- * @param ofs offset relative to mtd start
+ * @param from The offset to read
+ * @param len number of bytes to read
+ * @param retlen pointer to variable to store the number of read bytes
+ * @param buf the databuffer to put/get data
*
- * Mark the block as bad
+ * Read user OTP area.
*/
-static int onenand_block_markbad(struct mtd_info *mtd, loff_t ofs)
+static int onenand_read_user_prot_reg(struct mtd_info *mtd, loff_t from,
+ size_t len, size_t *retlen, u_char *buf)
{
- struct onenand_chip *this = mtd->priv;
- int ret;
-
- ret = onenand_block_isbad(mtd, ofs);
- if (ret) {
- /* If it was bad already, return success and do nothing */
- if (ret > 0)
- return 0;
- return ret;
- }
+ return onenand_otp_walk(mtd, from, len, retlen, buf, do_otp_read, MTD_OTP_USER);
+}
- return this->block_markbad(mtd, ofs);
+/**
+ * onenand_write_user_prot_reg - [MTD Interface] Write user OTP area
+ * @param mtd MTD device structure
+ * @param from The offset to write
+ * @param len number of bytes to write
+ * @param retlen pointer to variable to store the number of write bytes
+ * @param buf the databuffer to put/get data
+ *
+ * Write user OTP area.
+ */
+static int onenand_write_user_prot_reg(struct mtd_info *mtd, loff_t from,
+ size_t len, size_t *retlen, u_char *buf)
+{
+ return onenand_otp_walk(mtd, from, len, retlen, buf, do_otp_write, MTD_OTP_USER);
}
/**
- * onenand_unlock - [MTD Interface] Unlock block(s)
+ * onenand_lock_user_prot_reg - [MTD Interface] Lock user OTP area
* @param mtd MTD device structure
- * @param ofs offset relative to mtd start
+ * @param from The offset to lock
* @param len number of bytes to unlock
*
- * Unlock one or more blocks
+ * Write lock mark on spare area in page 0 in OTP block
*/
-static int onenand_unlock(struct mtd_info *mtd, loff_t ofs, size_t len)
+static int onenand_lock_user_prot_reg(struct mtd_info *mtd, loff_t from,
+ size_t len)
{
struct onenand_chip *this = mtd->priv;
- int start, end, block, value, status;
+ u_char *buf = FLEXONENAND(this) ? this->page_buf : this->oob_buf;
+ size_t retlen;
+ int ret;
- start = ofs >> this->erase_shift;
- end = len >> this->erase_shift;
+ memset(buf, 0xff, FLEXONENAND(this) ? this->writesize
+ : mtd->oobsize);
+ /*
+ * Note: OTP lock operation
+ * OTP block : 0xXXFC
+ * 1st block : 0xXXF3 (If chip support)
+ * Both : 0xXXF0 (If chip support)
+ */
+ if (FLEXONENAND(this))
+ buf[FLEXONENAND_OTP_LOCK_OFFSET] = 0xFC;
+ else
+ buf[ONENAND_OTP_LOCK_OFFSET] = 0xFC;
- /* Continuous lock scheme */
- if (this->options & ONENAND_CONT_LOCK) {
- /* Set start block address */
- this->write_word(start, this->base + ONENAND_REG_START_BLOCK_ADDRESS);
- /* Set end block address */
- this->write_word(end - 1, this->base + ONENAND_REG_END_BLOCK_ADDRESS);
- /* Write unlock command */
- this->command(mtd, ONENAND_CMD_UNLOCK, 0, 0);
+ /*
+ * Write lock mark to 8th word of sector0 of page0 of the spare0.
+ * We write 16 bytes spare area instead of 2 bytes.
+ * For Flex-OneNAND, we write lock mark to 1st word of sector 4 of
+ * main area of page 49.
+ */
- /* There's no return value */
- this->wait(mtd, FL_UNLOCKING);
+ from = 0;
+ len = FLEXONENAND(this) ? mtd->writesize : 16;
- /* Sanity check */
- while (this->read_word(this->base + ONENAND_REG_CTRL_STATUS)
- & ONENAND_CTRL_ONGO)
- continue;
+ ret = onenand_otp_walk(mtd, from, len, &retlen, buf, do_otp_lock, MTD_OTP_USER);
- /* Check lock status */
- status = this->read_word(this->base + ONENAND_REG_WP_STATUS);
- if (!(status & ONENAND_WP_US))
- printk(KERN_ERR "wp status = 0x%x\n", status);
+ return ret ? : retlen;
+}
+#endif /* CONFIG_MTD_ONENAND_OTP */
- return 0;
- }
+/**
+ * onenand_check_features - Check and set OneNAND features
+ * @param mtd MTD data structure
+ *
+ * Check and set OneNAND features
+ * - lock scheme
+ * - two plane
+ */
+static void onenand_check_features(struct mtd_info *mtd)
+{
+ struct onenand_chip *this = mtd->priv;
+ unsigned int density, process;
- /* Block lock scheme */
- for (block = start; block < end; block++) {
- /* Set block address */
- value = onenand_block_address(this, block);
- this->write_word(value, this->base + ONENAND_REG_START_ADDRESS1);
- /* Select DataRAM for DDP */
- value = onenand_bufferram_address(this, block);
- this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2);
- /* Set start block address */
- this->write_word(block, this->base + ONENAND_REG_START_BLOCK_ADDRESS);
- /* Write unlock command */
- this->command(mtd, ONENAND_CMD_UNLOCK, 0, 0);
+ /* Lock scheme depends on density and process */
+ density = onenand_get_density(this->device_id);
+ process = this->version_id >> ONENAND_VERSION_PROCESS_SHIFT;
- /* There's no return value */
- this->wait(mtd, FL_UNLOCKING);
+ /* Lock scheme */
+ switch (density) {
+ case ONENAND_DEVICE_DENSITY_4Gb:
+ this->options |= ONENAND_HAS_2PLANE;
+
+ case ONENAND_DEVICE_DENSITY_2Gb:
+ /* 2Gb DDP does not have 2 plane */
+ if (!ONENAND_IS_DDP(this))
+ this->options |= ONENAND_HAS_2PLANE;
+ this->options |= ONENAND_HAS_UNLOCK_ALL;
+
+ case ONENAND_DEVICE_DENSITY_1Gb:
+ /* A-Die has all block unlock */
+ if (process)
+ this->options |= ONENAND_HAS_UNLOCK_ALL;
+ break;
- /* Sanity check */
- while (this->read_word(this->base + ONENAND_REG_CTRL_STATUS)
- & ONENAND_CTRL_ONGO)
- continue;
+ default:
+ /* Some OneNAND has continuous lock scheme */
+ if (!process)
+ this->options |= ONENAND_HAS_CONT_LOCK;
+ break;
+ }
- /* Check lock status */
- status = this->read_word(this->base + ONENAND_REG_WP_STATUS);
- if (!(status & ONENAND_WP_US))
- printk(KERN_ERR "block = %d, wp status = 0x%x\n", block, status);
+ if (ONENAND_IS_MLC(this))
+ this->options &= ~ONENAND_HAS_2PLANE;
+
+ if (FLEXONENAND(this)) {
+ this->options &= ~ONENAND_HAS_CONT_LOCK;
+ this->options |= ONENAND_HAS_UNLOCK_ALL;
}
- return 0;
+ if (this->options & ONENAND_HAS_CONT_LOCK)
+ printk(KERN_DEBUG "Lock scheme is Continuous Lock\n");
+ if (this->options & ONENAND_HAS_UNLOCK_ALL)
+ printk(KERN_DEBUG "Chip support all block unlock\n");
+ if (this->options & ONENAND_HAS_2PLANE)
+ printk(KERN_DEBUG "Chip has 2 plane\n");
}
/**
- * onenand_print_device_info - Print device ID
+ * onenand_print_device_info - Print device & version ID
* @param device device ID
+ * @param version version ID
*
- * Print device ID
+ * Print device & version ID
*/
-static void onenand_print_device_info(int device)
+static void onenand_print_device_info(int device, int version)
{
- int vcc, demuxed, ddp, density;
+ int vcc, demuxed, ddp, density, flexonenand;
vcc = device & ONENAND_DEVICE_VCC_MASK;
demuxed = device & ONENAND_DEVICE_IS_DEMUX;
ddp = device & ONENAND_DEVICE_IS_DDP;
- density = device >> ONENAND_DEVICE_DENSITY_SHIFT;
- printk(KERN_INFO "%sOneNAND%s %dMB %sV 16-bit (0x%02x)\n",
- demuxed ? "" : "Muxed ",
+ density = onenand_get_density(device);
+ flexonenand = device & DEVICE_IS_FLEXONENAND;
+ printk(KERN_INFO "%s%sOneNAND%s %dMB %sV 16-bit (0x%02x)\n",
+ demuxed ? "" : "Muxed ",
+ flexonenand ? "Flex-" : "",
ddp ? "(DDP)" : "",
(16 << density),
vcc ? "2.65/3.3" : "1.8",
device);
+ printk(KERN_INFO "OneNAND version = 0x%04x\n", version);
}
static const struct onenand_manufacturers onenand_manuf_ids[] = {
{ONENAND_MFR_SAMSUNG, "Samsung"},
+ {ONENAND_MFR_NUMONYX, "Numonyx"},
};
/**
}
/**
+* flexonenand_get_boundary - Reads the SLC boundary
+* @param onenand_info - onenand info structure
+**/
+static int flexonenand_get_boundary(struct mtd_info *mtd)
+{
+ struct onenand_chip *this = mtd->priv;
+ unsigned die, bdry;
+ int ret, syscfg, locked;
+
+ /* Disable ECC */
+ syscfg = this->read_word(this->base + ONENAND_REG_SYS_CFG1);
+ this->write_word((syscfg | 0x0100), this->base + ONENAND_REG_SYS_CFG1);
+
+ for (die = 0; die < this->dies; die++) {
+ this->command(mtd, FLEXONENAND_CMD_PI_ACCESS, die, 0);
+ this->wait(mtd, FL_SYNCING);
+
+ this->command(mtd, FLEXONENAND_CMD_READ_PI, die, 0);
+ ret = this->wait(mtd, FL_READING);
+
+ bdry = this->read_word(this->base + ONENAND_DATARAM);
+ if ((bdry >> FLEXONENAND_PI_UNLOCK_SHIFT) == 3)
+ locked = 0;
+ else
+ locked = 1;
+ this->boundary[die] = bdry & FLEXONENAND_PI_MASK;
+
+ this->command(mtd, ONENAND_CMD_RESET, 0, 0);
+ ret = this->wait(mtd, FL_RESETING);
+
+ printk(KERN_INFO "Die %d boundary: %d%s\n", die,
+ this->boundary[die], locked ? "(Locked)" : "(Unlocked)");
+ }
+
+ /* Enable ECC */
+ this->write_word(syscfg, this->base + ONENAND_REG_SYS_CFG1);
+ return 0;
+}
+
+/**
+ * flexonenand_get_size - Fill up fields in onenand_chip and mtd_info
+ * boundary[], diesize[], mtd->size, mtd->erasesize
+ * @param mtd - MTD device structure
+ */
+static void flexonenand_get_size(struct mtd_info *mtd)
+{
+ struct onenand_chip *this = mtd->priv;
+ int die, i, eraseshift, density;
+ int blksperdie, maxbdry;
+ loff_t ofs;
+
+ density = onenand_get_density(this->device_id);
+ blksperdie = ((loff_t)(16 << density) << 20) >> (this->erase_shift);
+ blksperdie >>= ONENAND_IS_DDP(this) ? 1 : 0;
+ maxbdry = blksperdie - 1;
+ eraseshift = this->erase_shift - 1;
+
+ mtd->numeraseregions = this->dies << 1;
+
+ /* This fills up the device boundary */
+ flexonenand_get_boundary(mtd);
+ die = ofs = 0;
+ i = -1;
+ for (; die < this->dies; die++) {
+ if (!die || this->boundary[die-1] != maxbdry) {
+ i++;
+ mtd->eraseregions[i].offset = ofs;
+ mtd->eraseregions[i].erasesize = 1 << eraseshift;
+ mtd->eraseregions[i].numblocks =
+ this->boundary[die] + 1;
+ ofs += mtd->eraseregions[i].numblocks << eraseshift;
+ eraseshift++;
+ } else {
+ mtd->numeraseregions -= 1;
+ mtd->eraseregions[i].numblocks +=
+ this->boundary[die] + 1;
+ ofs += (this->boundary[die] + 1) << (eraseshift - 1);
+ }
+ if (this->boundary[die] != maxbdry) {
+ i++;
+ mtd->eraseregions[i].offset = ofs;
+ mtd->eraseregions[i].erasesize = 1 << eraseshift;
+ mtd->eraseregions[i].numblocks = maxbdry ^
+ this->boundary[die];
+ ofs += mtd->eraseregions[i].numblocks << eraseshift;
+ eraseshift--;
+ } else
+ mtd->numeraseregions -= 1;
+ }
+
+ /* Expose MLC erase size except when all blocks are SLC */
+ mtd->erasesize = 1 << this->erase_shift;
+ if (mtd->numeraseregions == 1)
+ mtd->erasesize >>= 1;
+
+ printk(KERN_INFO "Device has %d eraseregions\n", mtd->numeraseregions);
+ for (i = 0; i < mtd->numeraseregions; i++)
+ printk(KERN_INFO "[offset: 0x%08x, erasesize: 0x%05x,"
+ " numblocks: %04u]\n",
+ (unsigned int) mtd->eraseregions[i].offset,
+ mtd->eraseregions[i].erasesize,
+ mtd->eraseregions[i].numblocks);
+
+ for (die = 0, mtd->size = 0; die < this->dies; die++) {
+ this->diesize[die] = (loff_t)blksperdie << this->erase_shift;
+ this->diesize[die] -= (loff_t)(this->boundary[die] + 1)
+ << (this->erase_shift - 1);
+ mtd->size += this->diesize[die];
+ }
+}
+
+/**
+ * flexonenand_check_blocks_erased - Check if blocks are erased
+ * @param mtd_info - mtd info structure
+ * @param start - first erase block to check
+ * @param end - last erase block to check
+ *
+ * Converting an unerased block from MLC to SLC
+ * causes byte values to change. Since both data and its ECC
+ * have changed, reads on the block give uncorrectable error.
+ * This might lead to the block being detected as bad.
+ *
+ * Avoid this by ensuring that the block to be converted is
+ * erased.
+ */
+static int flexonenand_check_blocks_erased(struct mtd_info *mtd, int start, int end)
+{
+ struct onenand_chip *this = mtd->priv;
+ int i, ret;
+ int block;
+ struct mtd_oob_ops ops = {
+ .mode = MTD_OOB_PLACE,
+ .ooboffs = 0,
+ .ooblen = mtd->oobsize,
+ .datbuf = NULL,
+ .oobbuf = this->oob_buf,
+ };
+ loff_t addr;
+
+ printk(KERN_DEBUG "Check blocks from %d to %d\n", start, end);
+
+ for (block = start; block <= end; block++) {
+ addr = flexonenand_addr(this, block);
+ if (onenand_block_isbad_nolock(mtd, addr, 0))
+ continue;
+
+ /*
+ * Since main area write results in ECC write to spare,
+ * it is sufficient to check only ECC bytes for change.
+ */
+ ret = onenand_read_oob_nolock(mtd, addr, &ops);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < mtd->oobsize; i++)
+ if (this->oob_buf[i] != 0xff)
+ break;
+
+ if (i != mtd->oobsize) {
+ printk(KERN_WARNING "Block %d not erased.\n", block);
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * flexonenand_set_boundary - Writes the SLC boundary
+ * @param mtd - mtd info structure
+ */
+int flexonenand_set_boundary(struct mtd_info *mtd, int die,
+ int boundary, int lock)
+{
+ struct onenand_chip *this = mtd->priv;
+ int ret, density, blksperdie, old, new, thisboundary;
+ loff_t addr;
+
+ /* Change only once for SDP Flex-OneNAND */
+ if (die && (!ONENAND_IS_DDP(this)))
+ return 0;
+
+ /* boundary value of -1 indicates no required change */
+ if (boundary < 0 || boundary == this->boundary[die])
+ return 0;
+
+ density = onenand_get_density(this->device_id);
+ blksperdie = ((16 << density) << 20) >> this->erase_shift;
+ blksperdie >>= ONENAND_IS_DDP(this) ? 1 : 0;
+
+ if (boundary >= blksperdie) {
+ printk(KERN_ERR "flexonenand_set_boundary: Invalid boundary value. "
+ "Boundary not changed.\n");
+ return -EINVAL;
+ }
+
+ /* Check if converting blocks are erased */
+ old = this->boundary[die] + (die * this->density_mask);
+ new = boundary + (die * this->density_mask);
+ ret = flexonenand_check_blocks_erased(mtd, min(old, new) + 1, max(old, new));
+ if (ret) {
+ printk(KERN_ERR "flexonenand_set_boundary: Please erase blocks before boundary change\n");
+ return ret;
+ }
+
+ this->command(mtd, FLEXONENAND_CMD_PI_ACCESS, die, 0);
+ this->wait(mtd, FL_SYNCING);
+
+ /* Check is boundary is locked */
+ this->command(mtd, FLEXONENAND_CMD_READ_PI, die, 0);
+ ret = this->wait(mtd, FL_READING);
+
+ thisboundary = this->read_word(this->base + ONENAND_DATARAM);
+ if ((thisboundary >> FLEXONENAND_PI_UNLOCK_SHIFT) != 3) {
+ printk(KERN_ERR "flexonenand_set_boundary: boundary locked\n");
+ ret = 1;
+ goto out;
+ }
+
+ printk(KERN_INFO "flexonenand_set_boundary: Changing die %d boundary: %d%s\n",
+ die, boundary, lock ? "(Locked)" : "(Unlocked)");
+
+ addr = die ? this->diesize[0] : 0;
+
+ boundary &= FLEXONENAND_PI_MASK;
+ boundary |= lock ? 0 : (3 << FLEXONENAND_PI_UNLOCK_SHIFT);
+
+ this->command(mtd, ONENAND_CMD_ERASE, addr, 0);
+ ret = this->wait(mtd, FL_ERASING);
+ if (ret) {
+ printk(KERN_ERR "flexonenand_set_boundary: Failed PI erase for Die %d\n", die);
+ goto out;
+ }
+
+ this->write_word(boundary, this->base + ONENAND_DATARAM);
+ this->command(mtd, ONENAND_CMD_PROG, addr, 0);
+ ret = this->wait(mtd, FL_WRITING);
+ if (ret) {
+ printk(KERN_ERR "flexonenand_set_boundary: Failed PI write for Die %d\n", die);
+ goto out;
+ }
+
+ this->command(mtd, FLEXONENAND_CMD_PI_UPDATE, die, 0);
+ ret = this->wait(mtd, FL_WRITING);
+out:
+ this->write_word(ONENAND_CMD_RESET, this->base + ONENAND_REG_COMMAND);
+ this->wait(mtd, FL_RESETING);
+ if (!ret)
+ /* Recalculate device size on boundary change*/
+ flexonenand_get_size(mtd);
+
+ return ret;
+}
+
+/**
* onenand_probe - [OneNAND Interface] Probe the OneNAND device
* @param mtd MTD device structure
*
* OneNAND detection method:
- * Compare the the values from command with ones from register
+ * Compare the values from command with ones from register
*/
static int onenand_probe(struct mtd_info *mtd)
{
struct onenand_chip *this = mtd->priv;
- int bram_maf_id, bram_dev_id, maf_id, dev_id;
- int version_id;
+ int bram_maf_id, bram_dev_id, maf_id, dev_id, ver_id;
int density;
+ int syscfg;
+
+ /* Save system configuration 1 */
+ syscfg = this->read_word(this->base + ONENAND_REG_SYS_CFG1);
+ /* Clear Sync. Burst Read mode to read BootRAM */
+ this->write_word((syscfg & ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE), this->base + ONENAND_REG_SYS_CFG1);
/* Send the command for reading device ID from BootRAM */
this->write_word(ONENAND_CMD_READID, this->base + ONENAND_BOOTRAM);
bram_maf_id = this->read_word(this->base + ONENAND_BOOTRAM + 0x0);
bram_dev_id = this->read_word(this->base + ONENAND_BOOTRAM + 0x2);
+ /* Reset OneNAND to read default register values */
+ this->write_word(ONENAND_CMD_RESET, this->base + ONENAND_BOOTRAM);
+ /* Wait reset */
+ this->wait(mtd, FL_RESETING);
+
+ /* Restore system configuration 1 */
+ this->write_word(syscfg, this->base + ONENAND_REG_SYS_CFG1);
+
/* Check manufacturer ID */
if (onenand_check_maf(bram_maf_id))
return -ENXIO;
- /* Reset OneNAND to read default register values */
- this->write_word(ONENAND_CMD_RESET, this->base + ONENAND_BOOTRAM);
-
/* Read manufacturer and device IDs from Register */
maf_id = this->read_word(this->base + ONENAND_REG_MANUFACTURER_ID);
dev_id = this->read_word(this->base + ONENAND_REG_DEVICE_ID);
+ ver_id = this->read_word(this->base + ONENAND_REG_VERSION_ID);
+ this->technology = this->read_word(this->base + ONENAND_REG_TECHNOLOGY);
/* Check OneNAND device */
if (maf_id != bram_maf_id || dev_id != bram_dev_id)
return -ENXIO;
/* Flash device information */
- onenand_print_device_info(dev_id);
+ onenand_print_device_info(dev_id, ver_id);
this->device_id = dev_id;
+ this->version_id = ver_id;
+
+ density = onenand_get_density(dev_id);
+ if (FLEXONENAND(this)) {
+ this->dies = ONENAND_IS_DDP(this) ? 2 : 1;
+ /* Maximum possible erase regions */
+ mtd->numeraseregions = this->dies << 1;
+ mtd->eraseregions = kzalloc(sizeof(struct mtd_erase_region_info)
+ * (this->dies << 1), GFP_KERNEL);
+ if (!mtd->eraseregions)
+ return -ENOMEM;
+ }
- density = dev_id >> ONENAND_DEVICE_DENSITY_SHIFT;
+ /*
+ * For Flex-OneNAND, chipsize represents maximum possible device size.
+ * mtd->size represents the actual device size.
+ */
this->chipsize = (16 << density) << 20;
- /* Set density mask. it is used for DDP */
- this->density_mask = (1 << (density + 6));
/* OneNAND page size & block size */
/* The data buffer size is equal to page size */
- mtd->oobblock = this->read_word(this->base + ONENAND_REG_DATA_BUFFER_SIZE);
- mtd->oobsize = mtd->oobblock >> 5;
- /* Pagers per block is always 64 in OneNAND */
- mtd->erasesize = mtd->oobblock << 6;
+ mtd->writesize = this->read_word(this->base + ONENAND_REG_DATA_BUFFER_SIZE);
+ /* We use the full BufferRAM */
+ if (ONENAND_IS_MLC(this))
+ mtd->writesize <<= 1;
+
+ mtd->oobsize = mtd->writesize >> 5;
+ /* Pages per a block are always 64 in OneNAND */
+ mtd->erasesize = mtd->writesize << 6;
+ /*
+ * Flex-OneNAND SLC area has 64 pages per block.
+ * Flex-OneNAND MLC area has 128 pages per block.
+ * Expose MLC erase size to find erase_shift and page_mask.
+ */
+ if (FLEXONENAND(this))
+ mtd->erasesize <<= 1;
this->erase_shift = ffs(mtd->erasesize) - 1;
- this->page_shift = ffs(mtd->oobblock) - 1;
- this->ppb_shift = (this->erase_shift - this->page_shift);
- this->page_mask = (mtd->erasesize / mtd->oobblock) - 1;
+ this->page_shift = ffs(mtd->writesize) - 1;
+ this->page_mask = (1 << (this->erase_shift - this->page_shift)) - 1;
+ /* Set density mask. it is used for DDP */
+ if (ONENAND_IS_DDP(this))
+ this->density_mask = this->chipsize >> (this->erase_shift + 1);
+ /* It's real page size */
+ this->writesize = mtd->writesize;
- /* REVIST: Multichip handling */
+ /* REVISIT: Multichip handling */
- mtd->size = this->chipsize;
+ if (FLEXONENAND(this))
+ flexonenand_get_size(mtd);
+ else
+ mtd->size = this->chipsize;
- /* Version ID */
- version_id = this->read_word(this->base + ONENAND_REG_VERSION_ID);
- printk(KERN_DEBUG "OneNAND version = 0x%04x\n", version_id);
+ /* Check OneNAND features */
+ onenand_check_features(mtd);
- /* Lock scheme */
- if (density <= ONENAND_DEVICE_DENSITY_512Mb &&
- !(version_id >> ONENAND_VERSION_PROCESS_SHIFT)) {
- printk(KERN_INFO "Lock scheme is Continues Lock\n");
- this->options |= ONENAND_CONT_LOCK;
+ /*
+ * We emulate the 4KiB page and 256KiB erase block size
+ * But oobsize is still 64 bytes.
+ * It is only valid if you turn on 2X program support,
+ * Otherwise it will be ignored by compiler.
+ */
+ if (ONENAND_IS_2PLANE(this)) {
+ mtd->writesize <<= 1;
+ mtd->erasesize <<= 1;
}
return 0;
"in suspended state\n");
}
-
/**
* onenand_scan - [OneNAND Interface] Scan for the OneNAND device
* @param mtd MTD device structure
*/
int onenand_scan(struct mtd_info *mtd, int maxchips)
{
+ int i, ret;
struct onenand_chip *this = mtd->priv;
if (!this->read_word)
if (!this->command)
this->command = onenand_command;
if (!this->wait)
- this->wait = onenand_wait;
+ onenand_setup_wait(mtd);
+ if (!this->bbt_wait)
+ this->bbt_wait = onenand_bbt_wait;
+ if (!this->unlock_all)
+ this->unlock_all = onenand_unlock_all;
if (!this->read_bufferram)
this->read_bufferram = onenand_read_bufferram;
/* Allocate buffers, if necessary */
if (!this->page_buf) {
- size_t len;
- len = mtd->oobblock + mtd->oobsize;
- this->page_buf = kmalloc(len, GFP_KERNEL);
+ this->page_buf = kzalloc(mtd->writesize, GFP_KERNEL);
if (!this->page_buf) {
printk(KERN_ERR "onenand_scan(): Can't allocate page_buf\n");
return -ENOMEM;
}
this->options |= ONENAND_PAGEBUF_ALLOC;
}
+ if (!this->oob_buf) {
+ this->oob_buf = kzalloc(mtd->oobsize, GFP_KERNEL);
+ if (!this->oob_buf) {
+ printk(KERN_ERR "onenand_scan(): Can't allocate oob_buf\n");
+ if (this->options & ONENAND_PAGEBUF_ALLOC) {
+ this->options &= ~ONENAND_PAGEBUF_ALLOC;
+ kfree(this->page_buf);
+ }
+ return -ENOMEM;
+ }
+ this->options |= ONENAND_OOBBUF_ALLOC;
+ }
this->state = FL_READY;
init_waitqueue_head(&this->wq);
spin_lock_init(&this->chip_lock);
+ /*
+ * Allow subpage writes up to oobsize.
+ */
switch (mtd->oobsize) {
+ case 128:
+ this->ecclayout = &onenand_oob_128;
+ mtd->subpage_sft = 0;
+ break;
case 64:
- this->autooob = &onenand_oob_64;
+ this->ecclayout = &onenand_oob_64;
+ mtd->subpage_sft = 2;
break;
case 32:
- this->autooob = &onenand_oob_32;
+ this->ecclayout = &onenand_oob_32;
+ mtd->subpage_sft = 1;
break;
default:
printk(KERN_WARNING "No OOB scheme defined for oobsize %d\n",
mtd->oobsize);
+ mtd->subpage_sft = 0;
/* To prevent kernel oops */
- this->autooob = &onenand_oob_32;
+ this->ecclayout = &onenand_oob_32;
break;
}
- memcpy(&mtd->oobinfo, this->autooob, sizeof(mtd->oobinfo));
+ this->subpagesize = mtd->writesize >> mtd->subpage_sft;
+
+ /*
+ * The number of bytes available for a client to place data into
+ * the out of band area
+ */
+ this->ecclayout->oobavail = 0;
+ for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES &&
+ this->ecclayout->oobfree[i].length; i++)
+ this->ecclayout->oobavail +=
+ this->ecclayout->oobfree[i].length;
+ mtd->oobavail = this->ecclayout->oobavail;
+
+ mtd->ecclayout = this->ecclayout;
/* Fill in remaining MTD driver data */
mtd->type = MTD_NANDFLASH;
- mtd->flags = MTD_CAP_NANDFLASH | MTD_ECC;
- mtd->ecctype = MTD_ECC_SW;
+ mtd->flags = MTD_CAP_NANDFLASH;
mtd->erase = onenand_erase;
mtd->point = NULL;
mtd->unpoint = NULL;
mtd->read = onenand_read;
mtd->write = onenand_write;
- mtd->read_ecc = onenand_read_ecc;
- mtd->write_ecc = onenand_write_ecc;
mtd->read_oob = onenand_read_oob;
mtd->write_oob = onenand_write_oob;
- mtd->readv = NULL;
- mtd->readv_ecc = NULL;
- mtd->writev = onenand_writev;
- mtd->writev_ecc = onenand_writev_ecc;
+ mtd->panic_write = onenand_panic_write;
+#ifdef CONFIG_MTD_ONENAND_OTP
+ mtd->get_fact_prot_info = onenand_get_fact_prot_info;
+ mtd->read_fact_prot_reg = onenand_read_fact_prot_reg;
+ mtd->get_user_prot_info = onenand_get_user_prot_info;
+ mtd->read_user_prot_reg = onenand_read_user_prot_reg;
+ mtd->write_user_prot_reg = onenand_write_user_prot_reg;
+ mtd->lock_user_prot_reg = onenand_lock_user_prot_reg;
+#endif
mtd->sync = onenand_sync;
- mtd->lock = NULL;
+ mtd->lock = onenand_lock;
mtd->unlock = onenand_unlock;
mtd->suspend = onenand_suspend;
mtd->resume = onenand_resume;
mtd->owner = THIS_MODULE;
/* Unlock whole block */
- mtd->unlock(mtd, 0x0, this->chipsize);
+ this->unlock_all(mtd);
+
+ ret = this->scan_bbt(mtd);
+ if ((!FLEXONENAND(this)) || ret)
+ return ret;
+
+ /* Change Flex-OneNAND boundaries if required */
+ for (i = 0; i < MAX_DIES; i++)
+ flexonenand_set_boundary(mtd, i, flex_bdry[2 * i],
+ flex_bdry[(2 * i) + 1]);
- return this->scan_bbt(mtd);
+ return 0;
}
/**
del_mtd_device (mtd);
/* Free bad block table memory, if allocated */
- if (this->bbm)
+ if (this->bbm) {
+ struct bbm_info *bbm = this->bbm;
+ kfree(bbm->bbt);
kfree(this->bbm);
- /* Buffer allocated by onenand_scan */
+ }
+ /* Buffers allocated by onenand_scan */
if (this->options & ONENAND_PAGEBUF_ALLOC)
kfree(this->page_buf);
+ if (this->options & ONENAND_OOBBUF_ALLOC)
+ kfree(this->oob_buf);
+ kfree(mtd->eraseregions);
}
EXPORT_SYMBOL_GPL(onenand_scan);
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff