* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/highmem.h>
#include <linux/mmc/host.h>
#include <linux/mmc/protocol.h>
+#include <linux/amba/bus.h>
+#include <linux/clk.h>
#include <asm/cacheflush.h>
#include <asm/div64.h>
#include <asm/io.h>
#include <asm/scatterlist.h>
#include <asm/sizes.h>
-#include <asm/hardware/amba.h>
-#include <asm/hardware/clock.h>
#include <asm/mach/mmc.h>
#include "mmci.h"
#define DRIVER_NAME "mmci-pl18x"
-#ifdef CONFIG_MMC_DEBUG
#define DBG(host,fmt,args...) \
pr_debug("%s: %s: " fmt, mmc_hostname(host->mmc), __func__ , args)
-#else
-#define DBG(host,fmt,args...) do { } while (0)
-#endif
static unsigned int fmax = 515633;
{
writel(0, host->base + MMCICOMMAND);
+ BUG_ON(host->data);
+
host->mrq = NULL;
host->cmd = NULL;
unsigned int datactrl, timeout, irqmask;
unsigned long long clks;
void __iomem *base;
+ int blksz_bits;
DBG(host, "blksz %04x blks %04x flags %08x\n",
- 1 << data->blksz_bits, data->blocks, data->flags);
+ data->blksz, data->blocks, data->flags);
host->data = data;
- host->size = data->blocks << data->blksz_bits;
+ host->size = data->blksz;
host->data_xfered = 0;
mmci_init_sg(host, data);
writel(timeout, base + MMCIDATATIMER);
writel(host->size, base + MMCIDATALENGTH);
- datactrl = MCI_DPSM_ENABLE | data->blksz_bits << 4;
+ blksz_bits = ffs(data->blksz) - 1;
+ BUG_ON(1 << blksz_bits != data->blksz);
+
+ datactrl = MCI_DPSM_ENABLE | blksz_bits << 4;
if (data->flags & MMC_DATA_READ) {
datactrl |= MCI_DPSM_DIRECTION;
irqmask = MCI_RXFIFOHALFFULLMASK;
+
+ /*
+ * If we have less than a FIFOSIZE of bytes to transfer,
+ * trigger a PIO interrupt as soon as any data is available.
+ */
+ if (host->size < MCI_FIFOSIZE)
+ irqmask |= MCI_RXDATAAVLBLMASK;
} else {
/*
* We don't actually need to include "FIFO empty" here
}
c |= cmd->opcode | MCI_CPSM_ENABLE;
- switch (cmd->flags & MMC_RSP_MASK) {
- case MMC_RSP_NONE:
- default:
- break;
- case MMC_RSP_LONG:
- c |= MCI_CPSM_LONGRSP;
- case MMC_RSP_SHORT:
+ if (cmd->flags & MMC_RSP_PRESENT) {
+ if (cmd->flags & MMC_RSP_136)
+ c |= MCI_CPSM_LONGRSP;
c |= MCI_CPSM_RESPONSE;
- break;
}
if (/*interrupt*/0)
c |= MCI_CPSM_INTERRUPT;
unsigned int status)
{
if (status & MCI_DATABLOCKEND) {
- host->data_xfered += 1 << data->blksz_bits;
+ host->data_xfered += data->blksz;
}
if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_TXUNDERRUN|MCI_RXOVERRUN)) {
if (status & MCI_DATACRCFAIL)
}
if (!cmd->data || cmd->error != MMC_ERR_NONE) {
+ if (host->data)
+ mmci_stop_data(host);
mmci_request_end(host, cmd->mrq);
} else if (!(cmd->data->flags & MMC_DATA_READ)) {
mmci_start_data(host, cmd->data);
/*
* PIO data transfer IRQ handler.
*/
-static irqreturn_t mmci_pio_irq(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t mmci_pio_irq(int irq, void *dev_id)
{
struct mmci_host *host = dev_id;
void __iomem *base = host->base;
/*
* Unmap the buffer.
*/
- mmci_kunmap_atomic(host, &flags);
+ mmci_kunmap_atomic(host, buffer, &flags);
host->sg_off += len;
host->size -= len;
/*
* Handle completion of command and data transfers.
*/
-static irqreturn_t mmci_irq(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t mmci_irq(int irq, void *dev_id)
{
struct mmci_host *host = dev_id;
u32 status;
struct mmci_host *host = mmc_priv(mmc);
u32 clk = 0, pwr = 0;
- DBG(host, "clock %uHz busmode %u powermode %u Vdd %u\n",
- ios->clock, ios->bus_mode, ios->power_mode, ios->vdd);
-
if (ios->clock) {
if (ios->clock >= host->mclk) {
clk = MCI_CLK_BYPASS;
}
}
-static struct mmc_host_ops mmci_ops = {
+static const struct mmc_host_ops mmci_ops = {
.request = mmci_request,
.set_ios = mmci_set_ios,
};
goto host_free;
}
- ret = clk_use(host->clk);
- if (ret)
- goto clk_free;
-
ret = clk_enable(host->clk);
if (ret)
- goto clk_unuse;
+ goto clk_free;
host->plat = plat;
host->mclk = clk_get_rate(host->clk);
mmc->f_min = (host->mclk + 511) / 512;
mmc->f_max = min(host->mclk, fmax);
mmc->ocr_avail = plat->ocr_mask;
+ mmc->caps = MMC_CAP_MULTIWRITE;
/*
* We can do SGIO
/*
* Since we only have a 16-bit data length register, we must
* ensure that we don't exceed 2^16-1 bytes in a single request.
- * Choose 64 (512-byte) sectors as the limit.
*/
- mmc->max_sectors = 64;
+ mmc->max_req_size = 65535;
/*
* Set the maximum segment size. Since we aren't doing DMA
* (yet) we are only limited by the data length register.
*/
- mmc->max_seg_size = mmc->max_sectors << 9;
+ mmc->max_seg_size = mmc->max_req_size;
+
+ /*
+ * Block size can be up to 2048 bytes, but must be a power of two.
+ */
+ mmc->max_blk_size = 2048;
+
+ /*
+ * No limit on the number of blocks transferred.
+ */
+ mmc->max_blk_count = mmc->max_req_size;
spin_lock_init(&host->lock);
writel(0, host->base + MMCIMASK1);
writel(0xfff, host->base + MMCICLEAR);
- ret = request_irq(dev->irq[0], mmci_irq, SA_SHIRQ, DRIVER_NAME " (cmd)", host);
+ ret = request_irq(dev->irq[0], mmci_irq, IRQF_SHARED, DRIVER_NAME " (cmd)", host);
if (ret)
goto unmap;
- ret = request_irq(dev->irq[1], mmci_pio_irq, SA_SHIRQ, DRIVER_NAME " (pio)", host);
+ ret = request_irq(dev->irq[1], mmci_pio_irq, IRQF_SHARED, DRIVER_NAME " (pio)", host);
if (ret)
goto irq0_free;
mmc_add_host(mmc);
- printk(KERN_INFO "%s: MMCI rev %x cfg %02x at 0x%08lx irq %d,%d\n",
+ printk(KERN_INFO "%s: MMCI rev %x cfg %02x at 0x%016llx irq %d,%d\n",
mmc_hostname(mmc), amba_rev(dev), amba_config(dev),
- dev->res.start, dev->irq[0], dev->irq[1]);
+ (unsigned long long)dev->res.start, dev->irq[0], dev->irq[1]);
init_timer(&host->timer);
host->timer.data = (unsigned long)host;
iounmap(host->base);
clk_disable:
clk_disable(host->clk);
- clk_unuse:
- clk_unuse(host->clk);
clk_free:
clk_put(host->clk);
host_free:
iounmap(host->base);
clk_disable(host->clk);
- clk_unuse(host->clk);
clk_put(host->clk);
mmc_free_host(mmc);