*
* Copyright (C) 2003-2004 Russell King, All Rights Reserved.
* SD support Copyright (C) 2004 Ian Molton, All Rights Reserved.
- * Copyright (C) 2005-2007 Pierre Ossman, All Rights Reserved.
+ * Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved.
* MMCv4 support Copyright (C) 2006 Philip Langdale, All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
#include <linux/delay.h>
#include <linux/pagemap.h>
#include <linux/err.h>
-#include <asm/scatterlist.h>
+#include <linux/leds.h>
#include <linux/scatterlist.h>
+#include <linux/log2.h>
+#include <linux/regulator/consumer.h>
#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
#include <linux/mmc/sd.h>
#include "core.h"
-#include "sysfs.h"
+#include "bus.h"
+#include "host.h"
+#include "sdio_bus.h"
#include "mmc_ops.h"
#include "sd_ops.h"
+#include "sdio_ops.h"
-extern int mmc_attach_mmc(struct mmc_host *host, u32 ocr);
-extern int mmc_attach_sd(struct mmc_host *host, u32 ocr);
+static struct workqueue_struct *workqueue;
+
+/*
+ * Enabling software CRCs on the data blocks can be a significant (30%)
+ * performance cost, and for other reasons may not always be desired.
+ * So we allow it it to be disabled.
+ */
+int use_spi_crc = 1;
+module_param(use_spi_crc, bool, 0);
+
+/*
+ * We normally treat cards as removed during suspend if they are not
+ * known to be on a non-removable bus, to avoid the risk of writing
+ * back data to a different card after resume. Allow this to be
+ * overridden if necessary.
+ */
+#ifdef CONFIG_MMC_UNSAFE_RESUME
+int mmc_assume_removable;
+#else
+int mmc_assume_removable = 1;
+#endif
+module_param_named(removable, mmc_assume_removable, bool, 0644);
+MODULE_PARM_DESC(
+ removable,
+ "MMC/SD cards are removable and may be removed during suspend");
+
+/*
+ * Internal function. Schedule delayed work in the MMC work queue.
+ */
+static int mmc_schedule_delayed_work(struct delayed_work *work,
+ unsigned long delay)
+{
+ return queue_delayed_work(workqueue, work, delay);
+}
+
+/*
+ * Internal function. Flush all scheduled work from the MMC work queue.
+ */
+static void mmc_flush_scheduled_work(void)
+{
+ flush_workqueue(workqueue);
+}
/**
* mmc_request_done - finish processing an MMC request
struct mmc_command *cmd = mrq->cmd;
int err = cmd->error;
- pr_debug("%s: req done (CMD%u): %d/%d/%d: %08x %08x %08x %08x\n",
- mmc_hostname(host), cmd->opcode, err,
- mrq->data ? mrq->data->error : 0,
- mrq->stop ? mrq->stop->error : 0,
- cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3]);
+ if (err && cmd->retries && mmc_host_is_spi(host)) {
+ if (cmd->resp[0] & R1_SPI_ILLEGAL_COMMAND)
+ cmd->retries = 0;
+ }
if (err && cmd->retries) {
+ pr_debug("%s: req failed (CMD%u): %d, retrying...\n",
+ mmc_hostname(host), cmd->opcode, err);
+
cmd->retries--;
cmd->error = 0;
host->ops->request(host, mrq);
- } else if (mrq->done) {
- mrq->done(mrq);
+ } else {
+ led_trigger_event(host->led, LED_OFF);
+
+ pr_debug("%s: req done (CMD%u): %d: %08x %08x %08x %08x\n",
+ mmc_hostname(host), cmd->opcode, err,
+ cmd->resp[0], cmd->resp[1],
+ cmd->resp[2], cmd->resp[3]);
+
+ if (mrq->data) {
+ pr_debug("%s: %d bytes transferred: %d\n",
+ mmc_hostname(host),
+ mrq->data->bytes_xfered, mrq->data->error);
+ }
+
+ if (mrq->stop) {
+ pr_debug("%s: (CMD%u): %d: %08x %08x %08x %08x\n",
+ mmc_hostname(host), mrq->stop->opcode,
+ mrq->stop->error,
+ mrq->stop->resp[0], mrq->stop->resp[1],
+ mrq->stop->resp[2], mrq->stop->resp[3]);
+ }
+
+ if (mrq->done)
+ mrq->done(mrq);
}
}
EXPORT_SYMBOL(mmc_request_done);
-/**
- * mmc_start_request - start a command on a host
- * @host: MMC host to start command on
- * @mrq: MMC request to start
- *
- * Queue a command on the specified host. We expect the
- * caller to be holding the host lock with interrupts disabled.
- */
-void
+static void
mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
{
#ifdef CONFIG_MMC_DEBUG
unsigned int i, sz;
+ struct scatterlist *sg;
#endif
pr_debug("%s: starting CMD%u arg %08x flags %08x\n",
mmc_hostname(host), mrq->cmd->opcode,
mrq->cmd->arg, mrq->cmd->flags);
+ if (mrq->data) {
+ pr_debug("%s: blksz %d blocks %d flags %08x "
+ "tsac %d ms nsac %d\n",
+ mmc_hostname(host), mrq->data->blksz,
+ mrq->data->blocks, mrq->data->flags,
+ mrq->data->timeout_ns / 1000000,
+ mrq->data->timeout_clks);
+ }
+
+ if (mrq->stop) {
+ pr_debug("%s: CMD%u arg %08x flags %08x\n",
+ mmc_hostname(host), mrq->stop->opcode,
+ mrq->stop->arg, mrq->stop->flags);
+ }
+
WARN_ON(!host->claimed);
+ led_trigger_event(host->led, LED_FULL);
+
mrq->cmd->error = 0;
mrq->cmd->mrq = mrq;
if (mrq->data) {
#ifdef CONFIG_MMC_DEBUG
sz = 0;
- for (i = 0;i < mrq->data->sg_len;i++)
- sz += mrq->data->sg[i].length;
+ for_each_sg(mrq->data->sg, sg, mrq->data->sg_len, i)
+ sz += sg->length;
BUG_ON(sz != mrq->data->blocks * mrq->data->blksz);
#endif
host->ops->request(host, mrq);
}
-EXPORT_SYMBOL(mmc_start_request);
-
static void mmc_wait_done(struct mmc_request *mrq)
{
complete(mrq->done_data);
}
-int mmc_wait_for_req(struct mmc_host *host, struct mmc_request *mrq)
+/**
+ * mmc_wait_for_req - start a request and wait for completion
+ * @host: MMC host to start command
+ * @mrq: MMC request to start
+ *
+ * Start a new MMC custom command request for a host, and wait
+ * for the command to complete. Does not attempt to parse the
+ * response.
+ */
+void mmc_wait_for_req(struct mmc_host *host, struct mmc_request *mrq)
{
DECLARE_COMPLETION_ONSTACK(complete);
mmc_start_request(host, mrq);
wait_for_completion(&complete);
-
- return 0;
}
EXPORT_SYMBOL(mmc_wait_for_req);
{
struct mmc_request mrq;
- BUG_ON(!host->claimed);
+ WARN_ON(!host->claimed);
memset(&mrq, 0, sizeof(struct mmc_request));
* mmc_set_data_timeout - set the timeout for a data command
* @data: data phase for command
* @card: the MMC card associated with the data transfer
- * @write: flag to differentiate reads from writes
+ *
+ * Computes the data timeout parameters according to the
+ * correct algorithm given the card type.
*/
-void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card,
- int write)
+void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card)
{
unsigned int mult;
/*
+ * SDIO cards only define an upper 1 s limit on access.
+ */
+ if (mmc_card_sdio(card)) {
+ data->timeout_ns = 1000000000;
+ data->timeout_clks = 0;
+ return;
+ }
+
+ /*
* SD cards use a 100 multiplier rather than 10
*/
mult = mmc_card_sd(card) ? 100 : 10;
* Scale up the multiplier (and therefore the timeout) by
* the r2w factor for writes.
*/
- if (write)
+ if (data->flags & MMC_DATA_WRITE)
mult <<= card->csd.r2w_factor;
data->timeout_ns = card->csd.tacc_ns * mult;
timeout_us += data->timeout_clks * 1000 /
(card->host->ios.clock / 1000);
- if (write)
- limit_us = 250000;
+ if (data->flags & MMC_DATA_WRITE)
+ /*
+ * The limit is really 250 ms, but that is
+ * insufficient for some crappy cards.
+ */
+ limit_us = 300000;
else
limit_us = 100000;
data->timeout_clks = 0;
}
}
+ /*
+ * Some cards need very high timeouts if driven in SPI mode.
+ * The worst observed timeout was 900ms after writing a
+ * continuous stream of data until the internal logic
+ * overflowed.
+ */
+ if (mmc_host_is_spi(card->host)) {
+ if (data->flags & MMC_DATA_WRITE) {
+ if (data->timeout_ns < 1000000000)
+ data->timeout_ns = 1000000000; /* 1s */
+ } else {
+ if (data->timeout_ns < 100000000)
+ data->timeout_ns = 100000000; /* 100ms */
+ }
+ }
}
EXPORT_SYMBOL(mmc_set_data_timeout);
/**
+ * mmc_align_data_size - pads a transfer size to a more optimal value
+ * @card: the MMC card associated with the data transfer
+ * @sz: original transfer size
+ *
+ * Pads the original data size with a number of extra bytes in
+ * order to avoid controller bugs and/or performance hits
+ * (e.g. some controllers revert to PIO for certain sizes).
+ *
+ * Returns the improved size, which might be unmodified.
+ *
+ * Note that this function is only relevant when issuing a
+ * single scatter gather entry.
+ */
+unsigned int mmc_align_data_size(struct mmc_card *card, unsigned int sz)
+{
+ /*
+ * FIXME: We don't have a system for the controller to tell
+ * the core about its problems yet, so for now we just 32-bit
+ * align the size.
+ */
+ sz = ((sz + 3) / 4) * 4;
+
+ return sz;
+}
+EXPORT_SYMBOL(mmc_align_data_size);
+
+/**
+ * mmc_host_enable - enable a host.
+ * @host: mmc host to enable
+ *
+ * Hosts that support power saving can use the 'enable' and 'disable'
+ * methods to exit and enter power saving states. For more information
+ * see comments for struct mmc_host_ops.
+ */
+int mmc_host_enable(struct mmc_host *host)
+{
+ if (!(host->caps & MMC_CAP_DISABLE))
+ return 0;
+
+ if (host->en_dis_recurs)
+ return 0;
+
+ if (host->nesting_cnt++)
+ return 0;
+
+ cancel_delayed_work_sync(&host->disable);
+
+ if (host->enabled)
+ return 0;
+
+ if (host->ops->enable) {
+ int err;
+
+ host->en_dis_recurs = 1;
+ err = host->ops->enable(host);
+ host->en_dis_recurs = 0;
+
+ if (err) {
+ pr_debug("%s: enable error %d\n",
+ mmc_hostname(host), err);
+ return err;
+ }
+ }
+ host->enabled = 1;
+ return 0;
+}
+EXPORT_SYMBOL(mmc_host_enable);
+
+static int mmc_host_do_disable(struct mmc_host *host, int lazy)
+{
+ if (host->ops->disable) {
+ int err;
+
+ host->en_dis_recurs = 1;
+ err = host->ops->disable(host, lazy);
+ host->en_dis_recurs = 0;
+
+ if (err < 0) {
+ pr_debug("%s: disable error %d\n",
+ mmc_hostname(host), err);
+ return err;
+ }
+ if (err > 0) {
+ unsigned long delay = msecs_to_jiffies(err);
+
+ mmc_schedule_delayed_work(&host->disable, delay);
+ }
+ }
+ host->enabled = 0;
+ return 0;
+}
+
+/**
+ * mmc_host_disable - disable a host.
+ * @host: mmc host to disable
+ *
+ * Hosts that support power saving can use the 'enable' and 'disable'
+ * methods to exit and enter power saving states. For more information
+ * see comments for struct mmc_host_ops.
+ */
+int mmc_host_disable(struct mmc_host *host)
+{
+ int err;
+
+ if (!(host->caps & MMC_CAP_DISABLE))
+ return 0;
+
+ if (host->en_dis_recurs)
+ return 0;
+
+ if (--host->nesting_cnt)
+ return 0;
+
+ if (!host->enabled)
+ return 0;
+
+ err = mmc_host_do_disable(host, 0);
+ return err;
+}
+EXPORT_SYMBOL(mmc_host_disable);
+
+/**
* __mmc_claim_host - exclusively claim a host
* @host: mmc host to claim
- * @card: mmc card to claim host for
- *
- * Claim a host for a set of operations. If a valid card
- * is passed and this wasn't the last card selected, select
- * the card before returning.
+ * @abort: whether or not the operation should be aborted
*
- * Note: you should use mmc_card_claim_host or mmc_claim_host.
+ * Claim a host for a set of operations. If @abort is non null and
+ * dereference a non-zero value then this will return prematurely with
+ * that non-zero value without acquiring the lock. Returns zero
+ * with the lock held otherwise.
*/
-void mmc_claim_host(struct mmc_host *host)
+int __mmc_claim_host(struct mmc_host *host, atomic_t *abort)
{
DECLARE_WAITQUEUE(wait, current);
unsigned long flags;
+ int stop;
+
+ might_sleep();
add_wait_queue(&host->wq, &wait);
spin_lock_irqsave(&host->lock, flags);
while (1) {
set_current_state(TASK_UNINTERRUPTIBLE);
- if (!host->claimed)
+ stop = abort ? atomic_read(abort) : 0;
+ if (stop || !host->claimed || host->claimer == current)
break;
spin_unlock_irqrestore(&host->lock, flags);
schedule();
spin_lock_irqsave(&host->lock, flags);
}
set_current_state(TASK_RUNNING);
- host->claimed = 1;
+ if (!stop) {
+ host->claimed = 1;
+ host->claimer = current;
+ host->claim_cnt += 1;
+ } else
+ wake_up(&host->wq);
spin_unlock_irqrestore(&host->lock, flags);
remove_wait_queue(&host->wq, &wait);
+ if (!stop)
+ mmc_host_enable(host);
+ return stop;
+}
+
+EXPORT_SYMBOL(__mmc_claim_host);
+
+/**
+ * mmc_try_claim_host - try exclusively to claim a host
+ * @host: mmc host to claim
+ *
+ * Returns %1 if the host is claimed, %0 otherwise.
+ */
+int mmc_try_claim_host(struct mmc_host *host)
+{
+ int claimed_host = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&host->lock, flags);
+ if (!host->claimed || host->claimer == current) {
+ host->claimed = 1;
+ host->claimer = current;
+ host->claim_cnt += 1;
+ claimed_host = 1;
+ }
+ spin_unlock_irqrestore(&host->lock, flags);
+ return claimed_host;
+}
+EXPORT_SYMBOL(mmc_try_claim_host);
+
+static void mmc_do_release_host(struct mmc_host *host)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&host->lock, flags);
+ if (--host->claim_cnt) {
+ /* Release for nested claim */
+ spin_unlock_irqrestore(&host->lock, flags);
+ } else {
+ host->claimed = 0;
+ host->claimer = NULL;
+ spin_unlock_irqrestore(&host->lock, flags);
+ wake_up(&host->wq);
+ }
}
-EXPORT_SYMBOL(mmc_claim_host);
+void mmc_host_deeper_disable(struct work_struct *work)
+{
+ struct mmc_host *host =
+ container_of(work, struct mmc_host, disable.work);
+
+ /* If the host is claimed then we do not want to disable it anymore */
+ if (!mmc_try_claim_host(host))
+ return;
+ mmc_host_do_disable(host, 1);
+ mmc_do_release_host(host);
+}
+
+/**
+ * mmc_host_lazy_disable - lazily disable a host.
+ * @host: mmc host to disable
+ *
+ * Hosts that support power saving can use the 'enable' and 'disable'
+ * methods to exit and enter power saving states. For more information
+ * see comments for struct mmc_host_ops.
+ */
+int mmc_host_lazy_disable(struct mmc_host *host)
+{
+ if (!(host->caps & MMC_CAP_DISABLE))
+ return 0;
+
+ if (host->en_dis_recurs)
+ return 0;
+
+ if (--host->nesting_cnt)
+ return 0;
+
+ if (!host->enabled)
+ return 0;
+
+ if (host->disable_delay) {
+ mmc_schedule_delayed_work(&host->disable,
+ msecs_to_jiffies(host->disable_delay));
+ return 0;
+ } else
+ return mmc_host_do_disable(host, 1);
+}
+EXPORT_SYMBOL(mmc_host_lazy_disable);
/**
* mmc_release_host - release a host
*/
void mmc_release_host(struct mmc_host *host)
{
- unsigned long flags;
-
- BUG_ON(!host->claimed);
+ WARN_ON(!host->claimed);
- spin_lock_irqsave(&host->lock, flags);
- host->claimed = 0;
- spin_unlock_irqrestore(&host->lock, flags);
+ mmc_host_lazy_disable(host);
- wake_up(&host->wq);
+ mmc_do_release_host(host);
}
EXPORT_SYMBOL(mmc_release_host);
mmc_set_ios(host);
}
+/**
+ * mmc_vdd_to_ocrbitnum - Convert a voltage to the OCR bit number
+ * @vdd: voltage (mV)
+ * @low_bits: prefer low bits in boundary cases
+ *
+ * This function returns the OCR bit number according to the provided @vdd
+ * value. If conversion is not possible a negative errno value returned.
+ *
+ * Depending on the @low_bits flag the function prefers low or high OCR bits
+ * on boundary voltages. For example,
+ * with @low_bits = true, 3300 mV translates to ilog2(MMC_VDD_32_33);
+ * with @low_bits = false, 3300 mV translates to ilog2(MMC_VDD_33_34);
+ *
+ * Any value in the [1951:1999] range translates to the ilog2(MMC_VDD_20_21).
+ */
+static int mmc_vdd_to_ocrbitnum(int vdd, bool low_bits)
+{
+ const int max_bit = ilog2(MMC_VDD_35_36);
+ int bit;
+
+ if (vdd < 1650 || vdd > 3600)
+ return -EINVAL;
+
+ if (vdd >= 1650 && vdd <= 1950)
+ return ilog2(MMC_VDD_165_195);
+
+ if (low_bits)
+ vdd -= 1;
+
+ /* Base 2000 mV, step 100 mV, bit's base 8. */
+ bit = (vdd - 2000) / 100 + 8;
+ if (bit > max_bit)
+ return max_bit;
+ return bit;
+}
+
+/**
+ * mmc_vddrange_to_ocrmask - Convert a voltage range to the OCR mask
+ * @vdd_min: minimum voltage value (mV)
+ * @vdd_max: maximum voltage value (mV)
+ *
+ * This function returns the OCR mask bits according to the provided @vdd_min
+ * and @vdd_max values. If conversion is not possible the function returns 0.
+ *
+ * Notes wrt boundary cases:
+ * This function sets the OCR bits for all boundary voltages, for example
+ * [3300:3400] range is translated to MMC_VDD_32_33 | MMC_VDD_33_34 |
+ * MMC_VDD_34_35 mask.
+ */
+u32 mmc_vddrange_to_ocrmask(int vdd_min, int vdd_max)
+{
+ u32 mask = 0;
+
+ if (vdd_max < vdd_min)
+ return 0;
+
+ /* Prefer high bits for the boundary vdd_max values. */
+ vdd_max = mmc_vdd_to_ocrbitnum(vdd_max, false);
+ if (vdd_max < 0)
+ return 0;
+
+ /* Prefer low bits for the boundary vdd_min values. */
+ vdd_min = mmc_vdd_to_ocrbitnum(vdd_min, true);
+ if (vdd_min < 0)
+ return 0;
+
+ /* Fill the mask, from max bit to min bit. */
+ while (vdd_max >= vdd_min)
+ mask |= 1 << vdd_max--;
+
+ return mask;
+}
+EXPORT_SYMBOL(mmc_vddrange_to_ocrmask);
+
+#ifdef CONFIG_REGULATOR
+
+/**
+ * mmc_regulator_get_ocrmask - return mask of supported voltages
+ * @supply: regulator to use
+ *
+ * This returns either a negative errno, or a mask of voltages that
+ * can be provided to MMC/SD/SDIO devices using the specified voltage
+ * regulator. This would normally be called before registering the
+ * MMC host adapter.
+ */
+int mmc_regulator_get_ocrmask(struct regulator *supply)
+{
+ int result = 0;
+ int count;
+ int i;
+
+ count = regulator_count_voltages(supply);
+ if (count < 0)
+ return count;
+
+ for (i = 0; i < count; i++) {
+ int vdd_uV;
+ int vdd_mV;
+
+ vdd_uV = regulator_list_voltage(supply, i);
+ if (vdd_uV <= 0)
+ continue;
+
+ vdd_mV = vdd_uV / 1000;
+ result |= mmc_vddrange_to_ocrmask(vdd_mV, vdd_mV);
+ }
+
+ return result;
+}
+EXPORT_SYMBOL(mmc_regulator_get_ocrmask);
+
+/**
+ * mmc_regulator_set_ocr - set regulator to match host->ios voltage
+ * @vdd_bit: zero for power off, else a bit number (host->ios.vdd)
+ * @supply: regulator to use
+ *
+ * Returns zero on success, else negative errno.
+ *
+ * MMC host drivers may use this to enable or disable a regulator using
+ * a particular supply voltage. This would normally be called from the
+ * set_ios() method.
+ */
+int mmc_regulator_set_ocr(struct regulator *supply, unsigned short vdd_bit)
+{
+ int result = 0;
+ int min_uV, max_uV;
+ int enabled;
+
+ enabled = regulator_is_enabled(supply);
+ if (enabled < 0)
+ return enabled;
+
+ if (vdd_bit) {
+ int tmp;
+ int voltage;
+
+ /* REVISIT mmc_vddrange_to_ocrmask() may have set some
+ * bits this regulator doesn't quite support ... don't
+ * be too picky, most cards and regulators are OK with
+ * a 0.1V range goof (it's a small error percentage).
+ */
+ tmp = vdd_bit - ilog2(MMC_VDD_165_195);
+ if (tmp == 0) {
+ min_uV = 1650 * 1000;
+ max_uV = 1950 * 1000;
+ } else {
+ min_uV = 1900 * 1000 + tmp * 100 * 1000;
+ max_uV = min_uV + 100 * 1000;
+ }
+
+ /* avoid needless changes to this voltage; the regulator
+ * might not allow this operation
+ */
+ voltage = regulator_get_voltage(supply);
+ if (voltage < 0)
+ result = voltage;
+ else if (voltage < min_uV || voltage > max_uV)
+ result = regulator_set_voltage(supply, min_uV, max_uV);
+ else
+ result = 0;
+
+ if (result == 0 && !enabled)
+ result = regulator_enable(supply);
+ } else if (enabled) {
+ result = regulator_disable(supply);
+ }
+
+ return result;
+}
+EXPORT_SYMBOL(mmc_regulator_set_ocr);
+
+#endif
+
/*
* Mask off any voltages we don't support and select
* the lowest voltage
host->ios.vdd = bit;
mmc_set_ios(host);
} else {
+ pr_warning("%s: host doesn't support card's voltages\n",
+ mmc_hostname(host));
ocr = 0;
}
}
/*
- * Allocate a new MMC card
- */
-struct mmc_card *mmc_alloc_card(struct mmc_host *host)
-{
- struct mmc_card *card;
-
- card = kmalloc(sizeof(struct mmc_card), GFP_KERNEL);
- if (!card)
- return ERR_PTR(-ENOMEM);
-
- mmc_init_card(card, host);
-
- return card;
-}
-
-/*
* Apply power to the MMC stack. This is a two-stage process.
* First, we enable power to the card without the clock running.
* We then wait a bit for the power to stabilise. Finally,
*/
static void mmc_power_up(struct mmc_host *host)
{
- int bit = fls(host->ocr_avail) - 1;
+ int bit;
+
+ /* If ocr is set, we use it */
+ if (host->ocr)
+ bit = ffs(host->ocr) - 1;
+ else
+ bit = fls(host->ocr_avail) - 1;
host->ios.vdd = bit;
- host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN;
- host->ios.chip_select = MMC_CS_DONTCARE;
+ if (mmc_host_is_spi(host)) {
+ host->ios.chip_select = MMC_CS_HIGH;
+ host->ios.bus_mode = MMC_BUSMODE_PUSHPULL;
+ } else {
+ host->ios.chip_select = MMC_CS_DONTCARE;
+ host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN;
+ }
host->ios.power_mode = MMC_POWER_UP;
host->ios.bus_width = MMC_BUS_WIDTH_1;
host->ios.timing = MMC_TIMING_LEGACY;
mmc_set_ios(host);
- mmc_delay(1);
+ /*
+ * This delay should be sufficient to allow the power supply
+ * to reach the minimum voltage.
+ */
+ mmc_delay(10);
+
+ if (host->f_min > 400000) {
+ pr_warning("%s: Minimum clock frequency too high for "
+ "identification mode\n", mmc_hostname(host));
+ host->ios.clock = host->f_min;
+ } else
+ host->ios.clock = 400000;
- host->ios.clock = host->f_min;
host->ios.power_mode = MMC_POWER_ON;
mmc_set_ios(host);
- mmc_delay(2);
+ /*
+ * This delay must be at least 74 clock sizes, or 1 ms, or the
+ * time required to reach a stable voltage.
+ */
+ mmc_delay(10);
}
static void mmc_power_off(struct mmc_host *host)
{
host->ios.clock = 0;
host->ios.vdd = 0;
- host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN;
- host->ios.chip_select = MMC_CS_DONTCARE;
+ if (!mmc_host_is_spi(host)) {
+ host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN;
+ host->ios.chip_select = MMC_CS_DONTCARE;
+ }
host->ios.power_mode = MMC_POWER_OFF;
host->ios.bus_width = MMC_BUS_WIDTH_1;
host->ios.timing = MMC_TIMING_LEGACY;
}
/*
+ * Cleanup when the last reference to the bus operator is dropped.
+ */
+static void __mmc_release_bus(struct mmc_host *host)
+{
+ BUG_ON(!host);
+ BUG_ON(host->bus_refs);
+ BUG_ON(!host->bus_dead);
+
+ host->bus_ops = NULL;
+}
+
+/*
+ * Increase reference count of bus operator
+ */
+static inline void mmc_bus_get(struct mmc_host *host)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&host->lock, flags);
+ host->bus_refs++;
+ spin_unlock_irqrestore(&host->lock, flags);
+}
+
+/*
+ * Decrease reference count of bus operator and free it if
+ * it is the last reference.
+ */
+static inline void mmc_bus_put(struct mmc_host *host)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&host->lock, flags);
+ host->bus_refs--;
+ if ((host->bus_refs == 0) && host->bus_ops)
+ __mmc_release_bus(host);
+ spin_unlock_irqrestore(&host->lock, flags);
+}
+
+/*
* Assign a mmc bus handler to a host. Only one bus handler may control a
* host at any given time.
*/
BUG_ON(!host);
BUG_ON(!ops);
- BUG_ON(!host->claimed);
+ WARN_ON(!host->claimed);
spin_lock_irqsave(&host->lock, flags);
BUG_ON(!host);
- BUG_ON(!host->claimed);
- BUG_ON(!host->bus_ops);
+ WARN_ON(!host->claimed);
+ WARN_ON(!host->bus_ops);
spin_lock_irqsave(&host->lock, flags);
mmc_bus_put(host);
}
-/*
- * Cleanup when the last reference to the bus operator is dropped.
- */
-void __mmc_release_bus(struct mmc_host *host)
-{
- BUG_ON(!host);
- BUG_ON(host->bus_refs);
- BUG_ON(!host->bus_dead);
-
- host->bus_ops = NULL;
-}
-
/**
* mmc_detect_change - process change of state on a MMC socket
* @host: host which changed state.
* @delay: optional delay to wait before detection (jiffies)
*
- * All we know is that card(s) have been inserted or removed
- * from the socket(s). We don't know which socket or cards.
+ * MMC drivers should call this when they detect a card has been
+ * inserted or removed. The MMC layer will confirm that any
+ * present card is still functional, and initialize any newly
+ * inserted.
*/
void mmc_detect_change(struct mmc_host *host, unsigned long delay)
{
#ifdef CONFIG_MMC_DEBUG
unsigned long flags;
spin_lock_irqsave(&host->lock, flags);
- BUG_ON(host->removed);
+ WARN_ON(host->removed);
spin_unlock_irqrestore(&host->lock, flags);
#endif
EXPORT_SYMBOL(mmc_detect_change);
-static void mmc_rescan(struct work_struct *work)
+void mmc_rescan(struct work_struct *work)
{
struct mmc_host *host =
container_of(work, struct mmc_host, detect.work);
mmc_bus_get(host);
- if (host->bus_ops == NULL) {
- /*
- * Only we can add a new handler, so it's safe to
- * release the lock here.
- */
- mmc_bus_put(host);
-
- mmc_claim_host(host);
+ /* if there is a card registered, check whether it is still present */
+ if ((host->bus_ops != NULL) && host->bus_ops->detect && !host->bus_dead)
+ host->bus_ops->detect(host);
- mmc_power_up(host);
- mmc_go_idle(host);
+ mmc_bus_put(host);
- mmc_send_if_cond(host, host->ocr_avail);
- err = mmc_send_app_op_cond(host, 0, &ocr);
- if (err == MMC_ERR_NONE) {
- if (mmc_attach_sd(host, ocr))
- mmc_power_off(host);
- } else {
- /*
- * If we fail to detect any SD cards then try
- * searching for MMC cards.
- */
- err = mmc_send_op_cond(host, 0, &ocr);
- if (err == MMC_ERR_NONE) {
- if (mmc_attach_mmc(host, ocr))
- mmc_power_off(host);
- } else {
- mmc_power_off(host);
- mmc_release_host(host);
- }
- }
- } else {
- if (host->bus_ops->detect && !host->bus_dead)
- host->bus_ops->detect(host);
+ mmc_bus_get(host);
+ /* if there still is a card present, stop here */
+ if (host->bus_ops != NULL) {
mmc_bus_put(host);
+ goto out;
}
-}
+ /* detect a newly inserted card */
-/**
- * mmc_alloc_host - initialise the per-host structure.
- * @extra: sizeof private data structure
- * @dev: pointer to host device model structure
- *
- * Initialise the per-host structure.
- */
-struct mmc_host *mmc_alloc_host(int extra, struct device *dev)
-{
- struct mmc_host *host;
+ /*
+ * Only we can add a new handler, so it's safe to
+ * release the lock here.
+ */
+ mmc_bus_put(host);
- host = mmc_alloc_host_sysfs(extra, dev);
- if (host) {
- spin_lock_init(&host->lock);
- init_waitqueue_head(&host->wq);
- INIT_DELAYED_WORK(&host->detect, mmc_rescan);
+ if (host->ops->get_cd && host->ops->get_cd(host) == 0)
+ goto out;
- /*
- * By default, hosts do not support SGIO or large requests.
- * They have to set these according to their abilities.
- */
- host->max_hw_segs = 1;
- host->max_phys_segs = 1;
- host->max_seg_size = PAGE_CACHE_SIZE;
+ mmc_claim_host(host);
- host->max_req_size = PAGE_CACHE_SIZE;
- host->max_blk_size = 512;
- host->max_blk_count = PAGE_CACHE_SIZE / 512;
- }
+ mmc_power_up(host);
+ sdio_reset(host);
+ mmc_go_idle(host);
- return host;
-}
+ mmc_send_if_cond(host, host->ocr_avail);
-EXPORT_SYMBOL(mmc_alloc_host);
+ /*
+ * First we search for SDIO...
+ */
+ err = mmc_send_io_op_cond(host, 0, &ocr);
+ if (!err) {
+ if (mmc_attach_sdio(host, ocr))
+ mmc_power_off(host);
+ goto out;
+ }
-/**
- * mmc_add_host - initialise host hardware
- * @host: mmc host
- */
-int mmc_add_host(struct mmc_host *host)
-{
- int ret;
+ /*
+ * ...then normal SD...
+ */
+ err = mmc_send_app_op_cond(host, 0, &ocr);
+ if (!err) {
+ if (mmc_attach_sd(host, ocr))
+ mmc_power_off(host);
+ goto out;
+ }
- ret = mmc_add_host_sysfs(host);
- if (ret == 0) {
- mmc_power_off(host);
- mmc_detect_change(host, 0);
+ /*
+ * ...and finally MMC.
+ */
+ err = mmc_send_op_cond(host, 0, &ocr);
+ if (!err) {
+ if (mmc_attach_mmc(host, ocr))
+ mmc_power_off(host);
+ goto out;
}
- return ret;
+ mmc_release_host(host);
+ mmc_power_off(host);
+
+out:
+ if (host->caps & MMC_CAP_NEEDS_POLL)
+ mmc_schedule_delayed_work(&host->detect, HZ);
}
-EXPORT_SYMBOL(mmc_add_host);
+void mmc_start_host(struct mmc_host *host)
+{
+ mmc_power_off(host);
+ mmc_detect_change(host, 0);
+}
-/**
- * mmc_remove_host - remove host hardware
- * @host: mmc host
- *
- * Unregister and remove all cards associated with this host,
- * and power down the MMC bus.
- */
-void mmc_remove_host(struct mmc_host *host)
+void mmc_stop_host(struct mmc_host *host)
{
#ifdef CONFIG_MMC_DEBUG
unsigned long flags;
spin_unlock_irqrestore(&host->lock, flags);
#endif
+ if (host->caps & MMC_CAP_DISABLE)
+ cancel_delayed_work(&host->disable);
+ cancel_delayed_work(&host->detect);
mmc_flush_scheduled_work();
+ /* clear pm flags now and let card drivers set them as needed */
+ host->pm_flags = 0;
+
mmc_bus_get(host);
if (host->bus_ops && !host->bus_dead) {
if (host->bus_ops->remove)
mmc_claim_host(host);
mmc_detach_bus(host);
mmc_release_host(host);
+ mmc_bus_put(host);
+ return;
}
mmc_bus_put(host);
BUG_ON(host->card);
mmc_power_off(host);
- mmc_remove_host_sysfs(host);
}
-EXPORT_SYMBOL(mmc_remove_host);
+void mmc_power_save_host(struct mmc_host *host)
+{
+ mmc_bus_get(host);
-/**
- * mmc_free_host - free the host structure
- * @host: mmc host
- *
- * Free the host once all references to it have been dropped.
- */
-void mmc_free_host(struct mmc_host *host)
+ if (!host->bus_ops || host->bus_dead || !host->bus_ops->power_restore) {
+ mmc_bus_put(host);
+ return;
+ }
+
+ if (host->bus_ops->power_save)
+ host->bus_ops->power_save(host);
+
+ mmc_bus_put(host);
+
+ mmc_power_off(host);
+}
+EXPORT_SYMBOL(mmc_power_save_host);
+
+void mmc_power_restore_host(struct mmc_host *host)
+{
+ mmc_bus_get(host);
+
+ if (!host->bus_ops || host->bus_dead || !host->bus_ops->power_restore) {
+ mmc_bus_put(host);
+ return;
+ }
+
+ mmc_power_up(host);
+ host->bus_ops->power_restore(host);
+
+ mmc_bus_put(host);
+}
+EXPORT_SYMBOL(mmc_power_restore_host);
+
+int mmc_card_awake(struct mmc_host *host)
+{
+ int err = -ENOSYS;
+
+ mmc_bus_get(host);
+
+ if (host->bus_ops && !host->bus_dead && host->bus_ops->awake)
+ err = host->bus_ops->awake(host);
+
+ mmc_bus_put(host);
+
+ return err;
+}
+EXPORT_SYMBOL(mmc_card_awake);
+
+int mmc_card_sleep(struct mmc_host *host)
{
- mmc_free_host_sysfs(host);
+ int err = -ENOSYS;
+
+ mmc_bus_get(host);
+
+ if (host->bus_ops && !host->bus_dead && host->bus_ops->awake)
+ err = host->bus_ops->sleep(host);
+
+ mmc_bus_put(host);
+
+ return err;
}
+EXPORT_SYMBOL(mmc_card_sleep);
-EXPORT_SYMBOL(mmc_free_host);
+int mmc_card_can_sleep(struct mmc_host *host)
+{
+ struct mmc_card *card = host->card;
+
+ if (card && mmc_card_mmc(card) && card->ext_csd.rev >= 3)
+ return 1;
+ return 0;
+}
+EXPORT_SYMBOL(mmc_card_can_sleep);
#ifdef CONFIG_PM
/**
* mmc_suspend_host - suspend a host
* @host: mmc host
- * @state: suspend mode (PM_SUSPEND_xxx)
*/
-int mmc_suspend_host(struct mmc_host *host, pm_message_t state)
+int mmc_suspend_host(struct mmc_host *host)
{
+ int err = 0;
+
+ if (host->caps & MMC_CAP_DISABLE)
+ cancel_delayed_work(&host->disable);
+ cancel_delayed_work(&host->detect);
mmc_flush_scheduled_work();
mmc_bus_get(host);
if (host->bus_ops && !host->bus_dead) {
if (host->bus_ops->suspend)
- host->bus_ops->suspend(host);
- if (!host->bus_ops->resume) {
+ err = host->bus_ops->suspend(host);
+ if (err == -ENOSYS || !host->bus_ops->resume) {
+ /*
+ * We simply "remove" the card in this case.
+ * It will be redetected on resume.
+ */
if (host->bus_ops->remove)
host->bus_ops->remove(host);
-
mmc_claim_host(host);
mmc_detach_bus(host);
mmc_release_host(host);
+ host->pm_flags = 0;
+ err = 0;
}
}
mmc_bus_put(host);
- mmc_power_off(host);
+ if (!err && !(host->pm_flags & MMC_PM_KEEP_POWER))
+ mmc_power_off(host);
- return 0;
+ return err;
}
EXPORT_SYMBOL(mmc_suspend_host);
*/
int mmc_resume_host(struct mmc_host *host)
{
+ int err = 0;
+
mmc_bus_get(host);
if (host->bus_ops && !host->bus_dead) {
- mmc_power_up(host);
+ if (!(host->pm_flags & MMC_PM_KEEP_POWER)) {
+ mmc_power_up(host);
+ mmc_select_voltage(host, host->ocr);
+ }
BUG_ON(!host->bus_ops->resume);
- host->bus_ops->resume(host);
+ err = host->bus_ops->resume(host);
+ if (err) {
+ printk(KERN_WARNING "%s: error %d during resume "
+ "(card was removed?)\n",
+ mmc_hostname(host), err);
+ if (host->bus_ops->remove)
+ host->bus_ops->remove(host);
+ mmc_claim_host(host);
+ mmc_detach_bus(host);
+ mmc_release_host(host);
+ /* no need to bother upper layers */
+ err = 0;
+ }
}
mmc_bus_put(host);
*/
mmc_detect_change(host, 1);
- return 0;
+ return err;
}
EXPORT_SYMBOL(mmc_resume_host);
#endif
+static int __init mmc_init(void)
+{
+ int ret;
+
+ workqueue = create_singlethread_workqueue("kmmcd");
+ if (!workqueue)
+ return -ENOMEM;
+
+ ret = mmc_register_bus();
+ if (ret)
+ goto destroy_workqueue;
+
+ ret = mmc_register_host_class();
+ if (ret)
+ goto unregister_bus;
+
+ ret = sdio_register_bus();
+ if (ret)
+ goto unregister_host_class;
+
+ return 0;
+
+unregister_host_class:
+ mmc_unregister_host_class();
+unregister_bus:
+ mmc_unregister_bus();
+destroy_workqueue:
+ destroy_workqueue(workqueue);
+
+ return ret;
+}
+
+static void __exit mmc_exit(void)
+{
+ sdio_unregister_bus();
+ mmc_unregister_host_class();
+ mmc_unregister_bus();
+ destroy_workqueue(workqueue);
+}
+
+subsys_initcall(mmc_init);
+module_exit(mmc_exit);
+
MODULE_LICENSE("GPL");
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff