menuconfig MISC_DEVICES
bool "Misc devices"
default y
+ ---help---
+ Say Y here to get to see options for device drivers from various
+ different categories. This option alone does not add any kernel code.
+
+ If you say N, all options in this submenu will be skipped and disabled.
if MISC_DEVICES
+config ATMEL_PWM
+ tristate "Atmel AT32/AT91 PWM support"
+ depends on AVR32 || ARCH_AT91
+ help
+ This option enables device driver support for the PWM channels
+ on certain Atmel prcoessors. Pulse Width Modulation is used for
+ purposes including software controlled power-efficent backlights
+ on LCD displays, motor control, and waveform generation.
+
+config ATMEL_TCLIB
+ bool "Atmel AT32/AT91 Timer/Counter Library"
+ depends on (AVR32 || ARCH_AT91)
+ help
+ Select this if you want a library to allocate the Timer/Counter
+ blocks found on many Atmel processors. This facilitates using
+ these blocks by different drivers despite processor differences.
+
+config ATMEL_TCB_CLKSRC
+ bool "TC Block Clocksource"
+ depends on ATMEL_TCLIB && GENERIC_TIME
+ default y
+ help
+ Select this to get a high precision clocksource based on a
+ TC block with a 5+ MHz base clock rate. Two timer channels
+ are combined to make a single 32-bit timer.
+
+ When GENERIC_CLOCKEVENTS is defined, the third timer channel
+ may be used as a clock event device supporting oneshot mode
+ (delays of up to two seconds) based on the 32 KiHz clock.
+
+config ATMEL_TCB_CLKSRC_BLOCK
+ int
+ depends on ATMEL_TCB_CLKSRC
+ prompt "TC Block" if ARCH_AT91RM9200 || ARCH_AT91SAM9260 || CPU_AT32AP700X
+ default 0
+ range 0 1
+ help
+ Some chips provide more than one TC block, so you have the
+ choice of which one to use for the clock framework. The other
+ TC can be used for other purposes, such as PWM generation and
+ interval timing.
+
config IBM_ASM
tristate "Device driver for IBM RSA service processor"
depends on X86 && PCI && INPUT && EXPERIMENTAL
for your IBM server.
config PHANTOM
- tristate "Sensable PHANToM"
+ tristate "Sensable PHANToM (PCI)"
depends on PCI
help
Say Y here if you want to build a driver for Sensable PHANToM device.
+ This driver is only for PCI PHANToMs.
+
If you choose to build module, its name will be phantom. If unsure,
say N here.
To compile this driver as a module, choose M here: the module will
be called tifm_7xx1.
+config ACER_WMI
+ tristate "Acer WMI Laptop Extras (EXPERIMENTAL)"
+ depends on X86
+ depends on EXPERIMENTAL
+ depends on ACPI
+ depends on LEDS_CLASS
+ depends on NEW_LEDS
+ depends on BACKLIGHT_CLASS_DEVICE
+ depends on SERIO_I8042
+ select ACPI_WMI
+ ---help---
+ This is a driver for newer Acer (and Wistron) laptops. It adds
+ wireless radio and bluetooth control, and on some laptops,
+ exposes the mail LED and LCD backlight.
+
+ For more information about this driver see
+ <file:Documentation/laptops/acer-wmi.txt>
+
+ If you have an ACPI-WMI compatible Acer/ Wistron laptop, say Y or M
+ here.
+
config ASUS_LAPTOP
tristate "Asus Laptop Extras (EXPERIMENTAL)"
depends on X86
depends on ACPI
depends on EXPERIMENTAL && !ACPI_ASUS
depends on LEDS_CLASS
+ depends on NEW_LEDS
depends on BACKLIGHT_CLASS_DEVICE
---help---
This is the new Linux driver for Asus laptops. It may also support some
If you have an ACPI-compatible ASUS laptop, say Y or M here.
+config FUJITSU_LAPTOP
+ tristate "Fujitsu Laptop Extras"
+ depends on X86
+ depends on ACPI
+ depends on INPUT
+ depends on BACKLIGHT_CLASS_DEVICE
+ ---help---
+ This is a driver for laptops built by Fujitsu:
+
+ * P2xxx/P5xxx/S6xxx/S7xxx series Lifebooks
+ * Possibly other Fujitsu laptop models
+ * Tested with S6410 and S7020
+
+ It adds support for LCD brightness control and some hotkeys.
+
+ If you have a Fujitsu laptop, say Y or M here.
+
+config FUJITSU_LAPTOP_DEBUG
+ bool "Verbose debug mode for Fujitsu Laptop Extras"
+ depends on FUJITSU_LAPTOP
+ default n
+ ---help---
+ Enables extra debug output from the fujitsu extras driver, at the
+ expense of a slight increase in driver size.
+
+ If you are not sure, say N here.
+
+config TC1100_WMI
+ tristate "HP Compaq TC1100 Tablet WMI Extras (EXPERIMENTAL)"
+ depends on X86 && !X86_64
+ depends on EXPERIMENTAL
+ depends on ACPI
+ select ACPI_WMI
+ ---help---
+ This is a driver for the WMI extensions (wireless and bluetooth power
+ control) of the HP Compaq TC1100 tablet.
+
+config HP_WMI
+ tristate "HP WMI extras"
+ depends on ACPI_WMI
+ depends on INPUT
+ depends on RFKILL
+ help
+ Say Y here if you want to support WMI-based hotkeys on HP laptops and
+ to read data from WMI such as docking or ambient light sensor state.
+
+ To compile this driver as a module, choose M here: the module will
+ be called hp-wmi.
+
config MSI_LAPTOP
tristate "MSI Laptop Extras"
depends on X86
If you have an MSI S270 laptop, say Y or M here.
+config COMPAL_LAPTOP
+ tristate "Compal Laptop Extras"
+ depends on X86
+ depends on ACPI_EC
+ depends on BACKLIGHT_CLASS_DEVICE
+ ---help---
+ This is a driver for laptops built by Compal:
+
+ Compal FL90/IFL90
+ Compal FL91/IFL91
+ Compal FL92/JFL92
+ Compal FT00/IFT00
+
+ It adds support for Bluetooth, WLAN and LCD brightness control.
+
+ If you have an Compal FL9x/IFL9x/FT00 laptop, say Y or M here.
+
config SONY_LAPTOP
tristate "Sony Laptop Extras"
depends on X86 && ACPI
select BACKLIGHT_CLASS_DEVICE
+ depends on INPUT
---help---
This mini-driver drives the SNC and SPIC devices present in the ACPI
BIOS of the Sony Vaio laptops.
screen brightness control, Fn keys and allows powering on/off some
devices.
- Read <file:Documentation/sony-laptop.txt> for more information.
+ Read <file:Documentation/laptops/sony-laptop.txt> for more information.
config SONYPI_COMPAT
bool "Sonypi compatibility"
config THINKPAD_ACPI
tristate "ThinkPad ACPI Laptop Extras"
depends on X86 && ACPI
+ select BACKLIGHT_LCD_SUPPORT
select BACKLIGHT_CLASS_DEVICE
select HWMON
select NVRAM
+ select INPUT
+ select NEW_LEDS
+ select LEDS_CLASS
+ select NET
+ select RFKILL
---help---
This is a driver for the IBM and Lenovo ThinkPad laptops. It adds
support for Fn-Fx key combinations, Bluetooth control, video
output switching, ThinkLight control, UltraBay eject and more.
- For more information about this driver see
- <file:Documentation/thinkpad-acpi.txt> and <http://ibm-acpi.sf.net/> .
+ For more information about this driver see
+ <file:Documentation/laptops/thinkpad-acpi.txt> and
+ <http://ibm-acpi.sf.net/> .
- This driver was formely known as ibm-acpi.
+ This driver was formerly known as ibm-acpi.
If you have an IBM or Lenovo ThinkPad laptop, say Y or M here.
default y
---help---
Allows the thinkpad_acpi driver to handle removable bays. It will
- eletrically disable the device in the bay, and also generate
+ electrically disable the device in the bay, and also generate
notifications when the bay lever is ejected or inserted.
If you are not sure, say Y here.
-config THINKPAD_ACPI_INPUT_ENABLED
- bool "Enable input layer support by default"
+config THINKPAD_ACPI_VIDEO
+ bool "Video output control support"
+ depends on THINKPAD_ACPI
+ default y
+ ---help---
+ Allows the thinkpad_acpi driver to provide an interface to control
+ the various video output ports.
+
+ This feature often won't work well, depending on ThinkPad model,
+ display state, video output devices in use, whether there is a X
+ server running, phase of the moon, and the current mood of
+ Schroedinger's cat. If you can use X.org's RandR to control
+ your ThinkPad's video output ports instead of this feature,
+ don't think twice: do it and say N here to save some memory.
+
+ If you are not sure, say Y here.
+
+config THINKPAD_ACPI_HOTKEY_POLL
+ bool "Support NVRAM polling for hot keys"
depends on THINKPAD_ACPI
default y
---help---
- Enables hot key handling over the input layer by default. If unset,
- the driver does not enable any hot key handling by default, and also
- starts up with a mostly empty keymap.
+ Some thinkpad models benefit from NVRAM polling to detect a few of
+ the hot key press events. If you know your ThinkPad model does not
+ need to do NVRAM polling to support any of the hot keys you use,
+ unselecting this option will save about 1kB of memory.
+
+ ThinkPads T40 and newer, R52 and newer, and X31 and newer are
+ unlikely to need NVRAM polling in their latest BIOS versions.
+
+ NVRAM polling can detect at most the following keys: ThinkPad/Access
+ IBM, Zoom, Switch Display (fn+F7), ThinkLight, Volume up/down/mute,
+ Brightness up/down, Display Expand (fn+F8), Hibernate (fn+F12).
+
+ If you are not sure, say Y here. The driver enables polling only if
+ it is strictly necessary to do so.
+
+config ATMEL_SSC
+ tristate "Device driver for Atmel SSC peripheral"
+ depends on AVR32 || ARCH_AT91
+ ---help---
+ This option enables device driver support for Atmel Syncronized
+ Serial Communication peripheral (SSC).
+
+ The SSC peripheral supports a wide variety of serial frame based
+ communications, i.e. I2S, SPI, etc.
+
+ If unsure, say N.
+
+config INTEL_MENLOW
+ tristate "Thermal Management driver for Intel menlow platform"
+ depends on ACPI_THERMAL
+ select THERMAL
+ depends on X86
+ ---help---
+ ACPI thermal management enhancement driver on
+ Intel Menlow platform.
- If you are not sure, say Y here. Say N to retain the deprecated
- behavior of ibm-acpi, and thinkpad-acpi for kernels up to 2.6.21.
+ If unsure, say N.
+config EEEPC_LAPTOP
+ tristate "Eee PC Hotkey Driver (EXPERIMENTAL)"
+ depends on X86
+ depends on ACPI
+ depends on BACKLIGHT_CLASS_DEVICE
+ depends on HWMON
+ depends on EXPERIMENTAL
+ ---help---
+ This driver supports the Fn-Fx keys on Eee PC laptops.
+ It also adds the ability to switch camera/wlan on/off.
+
+ If you have an Eee PC laptop, say Y or M here.
+
+config ENCLOSURE_SERVICES
+ tristate "Enclosure Services"
+ default n
+ help
+ Provides support for intelligent enclosures (bays which
+ contain storage devices). You also need either a host
+ driver (SCSI/ATA) which supports enclosures
+ or a SCSI enclosure device (SES) to use these services.
+
+config SGI_XP
+ tristate "Support communication between SGI SSIs"
+ depends on NET
+ depends on (IA64_GENERIC || IA64_SGI_SN2 || IA64_SGI_UV || X86_64) && SMP
+ select IA64_UNCACHED_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2
+ select GENERIC_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2
+ select SGI_GRU if (IA64_GENERIC || IA64_SGI_UV || X86_64) && SMP
+ ---help---
+ An SGI machine can be divided into multiple Single System
+ Images which act independently of each other and have
+ hardware based memory protection from the others. Enabling
+ this feature will allow for direct communication between SSIs
+ based on a network adapter and DMA messaging.
+
+config HP_ILO
+ tristate "Channel interface driver for HP iLO/iLO2 processor"
+ depends on PCI
+ default n
+ help
+ The channel interface driver allows applications to communicate
+ with iLO/iLO2 management processors present on HP ProLiant
+ servers. Upon loading, the driver creates /dev/hpilo/dXccbN files,
+ which can be used to gather data from the management processor,
+ via read and write system calls.
+
+ To compile this driver as a module, choose M here: the
+ module will be called hpilo.
+
+config SGI_GRU
+ tristate "SGI GRU driver"
+ depends on (X86_64 || IA64_SGI_UV || IA64_GENERIC) && SMP
+ default n
+ select MMU_NOTIFIER
+ ---help---
+ The GRU is a hardware resource located in the system chipset. The GRU
+ contains memory that can be mmapped into the user address space. This memory is
+ used to communicate with the GRU to perform functions such as load/store,
+ scatter/gather, bcopy, AMOs, etc. The GRU is directly accessed by user
+ instructions using user virtual addresses. GRU instructions (ex., bcopy) use
+ user virtual addresses for operands.
+
+ If you are not running on a SGI UV system, say N.
+
+config SGI_GRU_DEBUG
+ bool "SGI GRU driver debug"
+ depends on SGI_GRU
+ default n
+ ---help---
+ This option enables addition debugging code for the SGI GRU driver. If
+ you are unsure, say N.
endif # MISC_DEVICES
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff