config ATMEL_PWM
tristate "Atmel AT32/AT91 PWM support"
- depends on AVR32 || ARCH_AT91
+ depends on AVR32 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9
help
This option enables device driver support for the PWM channels
on certain Atmel prcoessors. Pulse Width Modulation is used for
If you choose to build module, its name will be phantom. If unsure,
say N here.
-config EEPROM_93CX6
- tristate "EEPROM 93CX6 support"
- ---help---
- This is a driver for the EEPROM chipsets 93c46 and 93c66.
- The driver supports both read as well as write commands.
-
- If unsure, say N.
-
config SGI_IOC4
tristate "SGI IOC4 Base IO support"
depends on PCI
cards are supported via 'MMC/SD Card support: TI Flash Media MMC/SD
Interface support (MMC_TIFM_SD)'.
- To compile this driver as a module, choose M here: the module will
+ To compile this driver as a module, choose M here: the module will
be called tifm_core.
config TIFM_7XX1
To make actual use of the device, you will have to select some
flash card format drivers, as outlined in the TIFM_CORE Help.
- To compile this driver as a module, choose M here: the module will
+ To compile this driver as a module, choose M here: the module will
be called tifm_7xx1.
-config ACER_WMI
- tristate "Acer WMI Laptop Extras (EXPERIMENTAL)"
- depends on X86
- depends on EXPERIMENTAL
- depends on ACPI
- depends on LEDS_CLASS
- depends on NEW_LEDS
- depends on BACKLIGHT_CLASS_DEVICE
- depends on SERIO_I8042
- select ACPI_WMI
- ---help---
- This is a driver for newer Acer (and Wistron) laptops. It adds
- wireless radio and bluetooth control, and on some laptops,
- exposes the mail LED and LCD backlight.
-
- For more information about this driver see
- <file:Documentation/laptops/acer-wmi.txt>
-
- If you have an ACPI-WMI compatible Acer/ Wistron laptop, say Y or M
- here.
-
-config ASUS_LAPTOP
- tristate "Asus Laptop Extras (EXPERIMENTAL)"
- depends on X86
- depends on ACPI
- depends on EXPERIMENTAL && !ACPI_ASUS
- depends on LEDS_CLASS
- depends on NEW_LEDS
- depends on BACKLIGHT_CLASS_DEVICE
- ---help---
- This is the new Linux driver for Asus laptops. It may also support some
- MEDION, JVC or VICTOR laptops. It makes all the extra buttons generate
- standard ACPI events that go through /proc/acpi/events. It also adds
- support for video output switching, LCD backlight control, Bluetooth and
- Wlan control, and most importantly, allows you to blink those fancy LEDs.
-
- For more information and a userspace daemon for handling the extra
- buttons see <http://acpi4asus.sf.net/>.
-
- If you have an ACPI-compatible ASUS laptop, say Y or M here.
-
-config FUJITSU_LAPTOP
- tristate "Fujitsu Laptop Extras"
- depends on X86
- depends on ACPI
- depends on INPUT
- depends on BACKLIGHT_CLASS_DEVICE
- ---help---
- This is a driver for laptops built by Fujitsu:
-
- * P2xxx/P5xxx/S6xxx/S7xxx series Lifebooks
- * Possibly other Fujitsu laptop models
- * Tested with S6410 and S7020
-
- It adds support for LCD brightness control and some hotkeys.
-
- If you have a Fujitsu laptop, say Y or M here.
-
-config FUJITSU_LAPTOP_DEBUG
- bool "Verbose debug mode for Fujitsu Laptop Extras"
- depends on FUJITSU_LAPTOP
- default n
- ---help---
- Enables extra debug output from the fujitsu extras driver, at the
- expense of a slight increase in driver size.
-
- If you are not sure, say N here.
-
-config TC1100_WMI
- tristate "HP Compaq TC1100 Tablet WMI Extras (EXPERIMENTAL)"
- depends on X86 && !X86_64
- depends on EXPERIMENTAL
- depends on ACPI
- select ACPI_WMI
- ---help---
- This is a driver for the WMI extensions (wireless and bluetooth power
- control) of the HP Compaq TC1100 tablet.
-
-config HP_WMI
- tristate "HP WMI extras"
- depends on ACPI_WMI
- depends on INPUT
- depends on RFKILL
- help
- Say Y here if you want to support WMI-based hotkeys on HP laptops and
- to read data from WMI such as docking or ambient light sensor state.
-
- To compile this driver as a module, choose M here: the module will
- be called hp-wmi.
-
-config MSI_LAPTOP
- tristate "MSI Laptop Extras"
- depends on X86
- depends on ACPI_EC
- depends on BACKLIGHT_CLASS_DEVICE
- ---help---
- This is a driver for laptops built by MSI (MICRO-STAR
- INTERNATIONAL):
-
- MSI MegaBook S270 (MS-1013)
- Cytron/TCM/Medion/Tchibo MD96100/SAM2000
-
- It adds support for Bluetooth, WLAN and LCD brightness control.
-
- More information about this driver is available at
- <http://0pointer.de/lennart/tchibo.html>.
-
- If you have an MSI S270 laptop, say Y or M here.
-
-config COMPAL_LAPTOP
- tristate "Compal Laptop Extras"
- depends on X86
- depends on ACPI_EC
- depends on BACKLIGHT_CLASS_DEVICE
- ---help---
- This is a driver for laptops built by Compal:
-
- Compal FL90/IFL90
- Compal FL91/IFL91
- Compal FL92/JFL92
- Compal FT00/IFT00
-
- It adds support for Bluetooth, WLAN and LCD brightness control.
-
- If you have an Compal FL9x/IFL9x/FT00 laptop, say Y or M here.
-
-config SONY_LAPTOP
- tristate "Sony Laptop Extras"
- depends on X86 && ACPI
- select BACKLIGHT_CLASS_DEVICE
- depends on INPUT
- ---help---
- This mini-driver drives the SNC and SPIC devices present in the ACPI
- BIOS of the Sony Vaio laptops.
-
- It gives access to some extra laptop functionalities like Bluetooth,
- screen brightness control, Fn keys and allows powering on/off some
- devices.
-
- Read <file:Documentation/laptops/sony-laptop.txt> for more information.
-
-config SONYPI_COMPAT
- bool "Sonypi compatibility"
- depends on SONY_LAPTOP
- ---help---
- Build the sonypi driver compatibility code into the sony-laptop driver.
-
-config THINKPAD_ACPI
- tristate "ThinkPad ACPI Laptop Extras"
- depends on X86 && ACPI
- select BACKLIGHT_LCD_SUPPORT
- select BACKLIGHT_CLASS_DEVICE
- select HWMON
- select NVRAM
- select INPUT
- select NEW_LEDS
- select LEDS_CLASS
- select NET
- select RFKILL
- ---help---
- This is a driver for the IBM and Lenovo ThinkPad laptops. It adds
- support for Fn-Fx key combinations, Bluetooth control, video
- output switching, ThinkLight control, UltraBay eject and more.
- For more information about this driver see
- <file:Documentation/laptops/thinkpad-acpi.txt> and
- <http://ibm-acpi.sf.net/> .
-
- This driver was formerly known as ibm-acpi.
-
- If you have an IBM or Lenovo ThinkPad laptop, say Y or M here.
-
-config THINKPAD_ACPI_DEBUG
- bool "Verbose debug mode"
- depends on THINKPAD_ACPI
- default n
- ---help---
- Enables extra debugging information, at the expense of a slightly
- increase in driver size.
-
- If you are not sure, say N here.
-
-config THINKPAD_ACPI_DOCK
- bool "Legacy Docking Station Support"
- depends on THINKPAD_ACPI
- depends on ACPI_DOCK=n
- default n
- ---help---
- Allows the thinkpad_acpi driver to handle docking station events.
- This support was made obsolete by the generic ACPI docking station
- support (CONFIG_ACPI_DOCK). It will allow locking and removing the
- laptop from the docking station, but will not properly connect PCI
- devices.
-
- If you are not sure, say N here.
-
-config THINKPAD_ACPI_BAY
- bool "Legacy Removable Bay Support"
- depends on THINKPAD_ACPI
- default y
- ---help---
- Allows the thinkpad_acpi driver to handle removable bays. It will
- electrically disable the device in the bay, and also generate
- notifications when the bay lever is ejected or inserted.
-
- If you are not sure, say Y here.
-
-config THINKPAD_ACPI_VIDEO
- bool "Video output control support"
- depends on THINKPAD_ACPI
- default y
- ---help---
- Allows the thinkpad_acpi driver to provide an interface to control
- the various video output ports.
-
- This feature often won't work well, depending on ThinkPad model,
- display state, video output devices in use, whether there is a X
- server running, phase of the moon, and the current mood of
- Schroedinger's cat. If you can use X.org's RandR to control
- your ThinkPad's video output ports instead of this feature,
- don't think twice: do it and say N here to save some memory.
-
- If you are not sure, say Y here.
-
-config THINKPAD_ACPI_HOTKEY_POLL
- bool "Support NVRAM polling for hot keys"
- depends on THINKPAD_ACPI
- default y
- ---help---
- Some thinkpad models benefit from NVRAM polling to detect a few of
- the hot key press events. If you know your ThinkPad model does not
- need to do NVRAM polling to support any of the hot keys you use,
- unselecting this option will save about 1kB of memory.
-
- ThinkPads T40 and newer, R52 and newer, and X31 and newer are
- unlikely to need NVRAM polling in their latest BIOS versions.
-
- NVRAM polling can detect at most the following keys: ThinkPad/Access
- IBM, Zoom, Switch Display (fn+F7), ThinkLight, Volume up/down/mute,
- Brightness up/down, Display Expand (fn+F8), Hibernate (fn+F12).
+config ICS932S401
+ tristate "Integrated Circuits ICS932S401"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for the Integrated Circuits
+ ICS932S401 clock control chips.
- If you are not sure, say Y here. The driver enables polling only if
- it is strictly necessary to do so.
+ This driver can also be built as a module. If so, the module
+ will be called ics932s401.
config ATMEL_SSC
tristate "Device driver for Atmel SSC peripheral"
If unsure, say N.
-config INTEL_MENLOW
- tristate "Thermal Management driver for Intel menlow platform"
- depends on ACPI_THERMAL
- select THERMAL
- depends on X86
- ---help---
- ACPI thermal management enhancement driver on
- Intel Menlow platform.
-
- If unsure, say N.
-
-config EEEPC_LAPTOP
- tristate "Eee PC Hotkey Driver (EXPERIMENTAL)"
- depends on X86
- depends on ACPI
- depends on BACKLIGHT_CLASS_DEVICE
- depends on HWMON
- depends on EXPERIMENTAL
- ---help---
- This driver supports the Fn-Fx keys on Eee PC laptops.
- It also adds the ability to switch camera/wlan on/off.
-
- If you have an Eee PC laptop, say Y or M here.
-
config ENCLOSURE_SERVICES
tristate "Enclosure Services"
default n
config SGI_XP
tristate "Support communication between SGI SSIs"
- depends on IA64_GENERIC || IA64_SGI_SN2 || IA64_SGI_UV || (X86_64 && SMP)
+ depends on NET
+ depends on (IA64_GENERIC || IA64_SGI_SN2 || IA64_SGI_UV || X86_UV) && SMP
select IA64_UNCACHED_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2
select GENERIC_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2
+ select SGI_GRU if (IA64_GENERIC || IA64_SGI_UV || X86_64) && SMP
---help---
An SGI machine can be divided into multiple Single System
Images which act independently of each other and have
config SGI_GRU
tristate "SGI GRU driver"
- depends on (X86_64 || IA64_SGI_UV || IA64_GENERIC) && SMP
+ depends on (X86_UV || IA64_SGI_UV || IA64_GENERIC) && SMP
default n
select MMU_NOTIFIER
---help---
This option enables addition debugging code for the SGI GRU driver. If
you are unsure, say N.
+config DELL_LAPTOP
+ tristate "Dell Laptop Extras (EXPERIMENTAL)"
+ depends on X86
+ depends on DCDBAS
+ depends on EXPERIMENTAL
+ depends on BACKLIGHT_CLASS_DEVICE
+ depends on RFKILL
+ depends on POWER_SUPPLY
+ default n
+ ---help---
+ This driver adds support for rfkill and backlight control to Dell
+ laptops.
+
+source "drivers/misc/c2port/Kconfig"
+source "drivers/misc/eeprom/Kconfig"
+
endif # MISC_DEVICES