config MFD_SM501_GPIO
bool "Export GPIO via GPIO layer"
- depends on MFD_SM501 && HAVE_GPIO_LIB
+ depends on MFD_SM501 && GPIOLIB
---help---
This option uses the gpio library layer to export the 64 GPIO
lines on the SM501. The platform data is used to supply the
config MFD_ASIC3
bool "Support for Compaq ASIC3"
- depends on GENERIC_HARDIRQS && HAVE_GPIO_LIB && ARM
+ depends on GENERIC_HARDIRQS && GPIOLIB && ARM
---help---
This driver supports the ASIC3 multifunction chip found on many
PDAs (mainly iPAQ and HTC based ones)
+config MFD_DM355EVM_MSP
+ bool "DaVinci DM355 EVM microcontroller"
+ depends on I2C && MACH_DAVINCI_DM355_EVM
+ help
+ This driver supports the MSP430 microcontroller used on these
+ boards. MSP430 firmware manages resets and power sequencing,
+ inputs from buttons and the IR remote, LEDs, an RTC, and more.
+
config HTC_EGPIO
bool "HTC EGPIO support"
depends on GENERIC_HARDIRQS && GPIOLIB && ARM
config HTC_PASIC3
tristate "HTC PASIC3 LED/DS1WM chip support"
+ select MFD_CORE
help
This core driver provides register access for the LED/DS1WM
chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
HTC Magician devices, respectively. Actual functionality is
handled by the leds-pasic3 and ds1wm drivers.
+config UCB1400_CORE
+ tristate "Philips UCB1400 Core driver"
+ depends on AC97_BUS
+ depends on GPIOLIB
+ help
+ This enables support for the Philips UCB1400 core functions.
+ The UCB1400 is an AC97 audio codec.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ucb1400_core.
+
+config TPS65010
+ tristate "TPS6501x Power Management chips"
+ depends on I2C && GPIOLIB
+ default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
+ help
+ If you say yes here you get support for the TPS6501x series of
+ Power Management chips. These include voltage regulators,
+ lithium ion/polymer battery charging, and other features that
+ are often used in portable devices like cell phones and cameras.
+
+ This driver can also be built as a module. If so, the module
+ will be called tps65010.
+
+config MENELAUS
+ bool "Texas Instruments TWL92330/Menelaus PM chip"
+ depends on I2C=y && ARCH_OMAP24XX
+ help
+ If you say yes here you get support for the Texas Instruments
+ TWL92330/Menelaus Power Management chip. This include voltage
+ regulators, Dual slot memory card transceivers, real-time clock
+ and other features that are often used in portable devices like
+ cell phones and PDAs.
+
+config TWL4030_CORE
+ bool "Texas Instruments TWL4030/TPS659x0 Support"
+ depends on I2C=y && GENERIC_HARDIRQS
+ help
+ Say yes here if you have TWL4030 family chip on your board.
+ This core driver provides register access and IRQ handling
+ facilities, and registers devices for the various functions
+ so that function-specific drivers can bind to them.
+
+ These multi-function chips are found on many OMAP2 and OMAP3
+ boards, providing power management, RTC, GPIO, keypad, a
+ high speed USB OTG transceiver, an audio codec (on most
+ versions) and many other features.
+
+config MFD_TMIO
+ bool
+ default n
+
config MFD_T7L66XB
bool "Support Toshiba T7L66XB"
+ depends on ARM && HAVE_CLK
select MFD_CORE
+ select MFD_TMIO
help
Support for Toshiba Mobile IO Controller T7L66XB
+config MFD_TC6387XB
+ bool "Support Toshiba TC6387XB"
+ depends on ARM && HAVE_CLK
+ select MFD_CORE
+ select MFD_TMIO
+ help
+ Support for Toshiba Mobile IO Controller TC6387XB
+
config MFD_TC6393XB
bool "Support Toshiba TC6393XB"
depends on GPIOLIB && ARM
select MFD_CORE
+ select MFD_TMIO
help
Support for Toshiba Mobile IO Controller TC6393XB
+config PMIC_DA903X
+ bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
+ depends on I2C=y
+ help
+ Say yes here to support for Dialog Semiconductor DA9030 (a.k.a
+ ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
+ usually found on PXA processors-based platforms. This includes
+ the I2C driver and the core APIs _only_, you have to select
+ individual components like LCD backlight, voltage regulators,
+ LEDs and battery-charger under the corresponding menus.
+
+config MFD_WM8400
+ tristate "Support Wolfson Microelectronics WM8400"
+ select MFD_CORE
+ depends on I2C
+ help
+ Support for the Wolfson Microelecronics WM8400 PMIC and audio
+ CODEC. This driver adds provides common support for accessing
+ the device, additional drivers must be enabled in order to use
+ the functionality of the device.
+
+config MFD_WM8350
+ tristate
+
+config MFD_WM8350_CONFIG_MODE_0
+ bool
+ depends on MFD_WM8350
+
+config MFD_WM8350_CONFIG_MODE_1
+ bool
+ depends on MFD_WM8350
+
+config MFD_WM8350_CONFIG_MODE_2
+ bool
+ depends on MFD_WM8350
+
+config MFD_WM8350_CONFIG_MODE_3
+ bool
+ depends on MFD_WM8350
+
+config MFD_WM8351_CONFIG_MODE_0
+ bool
+ depends on MFD_WM8350
+
+config MFD_WM8351_CONFIG_MODE_1
+ bool
+ depends on MFD_WM8350
+
+config MFD_WM8351_CONFIG_MODE_2
+ bool
+ depends on MFD_WM8350
+
+config MFD_WM8351_CONFIG_MODE_3
+ bool
+ depends on MFD_WM8350
+
+config MFD_WM8352_CONFIG_MODE_0
+ bool
+ depends on MFD_WM8350
+
+config MFD_WM8352_CONFIG_MODE_1
+ bool
+ depends on MFD_WM8350
+
+config MFD_WM8352_CONFIG_MODE_2
+ bool
+ depends on MFD_WM8350
+
+config MFD_WM8352_CONFIG_MODE_3
+ bool
+ depends on MFD_WM8350
+
+config MFD_WM8350_I2C
+ tristate "Support Wolfson Microelectronics WM8350 with I2C"
+ select MFD_WM8350
+ depends on I2C
+ help
+ The WM8350 is an integrated audio and power management
+ subsystem with watchdog and RTC functionality for embedded
+ systems. This option enables core support for the WM8350 with
+ I2C as the control interface. Additional options must be
+ selected to enable support for the functionality of the chip.
+
+config MFD_PCF50633
+ tristate "Support for NXP PCF50633"
+ depends on I2C
+ help
+ Say yes here if you have NXP PCF50633 chip on your board.
+ This core driver provides register access and IRQ handling
+ facilities, and registers devices for the various functions
+ so that function-specific drivers can bind to them.
+
+config PCF50633_ADC
+ tristate "Support for NXP PCF50633 ADC"
+ depends on MFD_PCF50633
+ help
+ Say yes here if you want to include support for ADC in the
+ NXP PCF50633 chip.
+
+config PCF50633_GPIO
+ tristate "Support for NXP PCF50633 GPIO"
+ depends on MFD_PCF50633
+ help
+ Say yes here if you want to include support GPIO for pins on
+ the PCF50633 chip.
+
endmenu
menu "Multimedia Capabilities Port drivers"
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff