config MFD_ASIC3
bool "Support for Compaq ASIC3"
depends on GENERIC_HARDIRQS && GPIOLIB && ARM
+ select MFD_CORE
---help---
This driver supports the ASIC3 multifunction chip found on many
PDAs (mainly iPAQ and HTC based ones)
config HTC_PASIC3
tristate "HTC PASIC3 LED/DS1WM chip support"
+ select MFD_CORE
help
This core driver provides register access for the LED/DS1WM
chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
To compile this driver as a module, choose M here: the
module will be called ucb1400_core.
+config TPS65010
+ tristate "TPS6501x Power Management chips"
+ depends on I2C && GPIOLIB
+ default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
+ help
+ If you say yes here you get support for the TPS6501x series of
+ Power Management chips. These include voltage regulators,
+ lithium ion/polymer battery charging, and other features that
+ are often used in portable devices like cell phones and cameras.
+
+ This driver can also be built as a module. If so, the module
+ will be called tps65010.
+
+config MENELAUS
+ bool "Texas Instruments TWL92330/Menelaus PM chip"
+ depends on I2C=y && ARCH_OMAP24XX
+ help
+ If you say yes here you get support for the Texas Instruments
+ TWL92330/Menelaus Power Management chip. This include voltage
+ regulators, Dual slot memory card transceivers, real-time clock
+ and other features that are often used in portable devices like
+ cell phones and PDAs.
+
config TWL4030_CORE
bool "Texas Instruments TWL4030/TPS659x0 Support"
depends on I2C=y && GENERIC_HARDIRQS
high speed USB OTG transceiver, an audio codec (on most
versions) and many other features.
+config TWL4030_POWER
+ bool "Support power resources on TWL4030 family chips"
+ depends on TWL4030_CORE && ARM
+ help
+ Say yes here if you want to use the power resources on the
+ TWL4030 family chips. Most of these resources are regulators,
+ which have a separate driver; some are control signals, such
+ as clock request handshaking.
+
+ This driver uses board-specific data to initialize the resources
+ and load scripts controling which resources are switched off/on
+ or reset when a sleep, wakeup or warm reset event occurs.
+
+config TWL4030_CODEC
+ bool
+ depends on TWL4030_CORE
+ select MFD_CORE
+ default n
+
config MFD_TMIO
bool
default n
depends on I2C
help
Support for the Wolfson Microelecronics WM8400 PMIC and audio
- CODEC. This driver adds provides common support for accessing
+ CODEC. This driver provides common support for accessing
the device, additional drivers must be enabled in order to use
the functionality of the device.
+config MFD_WM831X
+ tristate "Support Wolfson Microelectronics WM831x PMICs"
+ select MFD_CORE
+ depends on I2C
+ help
+ Support for the Wolfson Microelecronics WM831x PMICs. This
+ driver provides common support for accessing the device,
+ additional drivers must be enabled in order to use the
+ functionality of the device.
+
config MFD_WM8350
tristate
I2C as the control interface. Additional options must be
selected to enable support for the functionality of the chip.
+config MFD_PCF50633
+ tristate "Support for NXP PCF50633"
+ depends on I2C
+ help
+ Say yes here if you have NXP PCF50633 chip on your board.
+ This core driver provides register access and IRQ handling
+ facilities, and registers devices for the various functions
+ so that function-specific drivers can bind to them.
+
+config MFD_MC13783
+ tristate "Support Freescale MC13783"
+ depends on SPI_MASTER
+ select MFD_CORE
+ help
+ Support for the Freescale (Atlas) MC13783 PMIC and audio CODEC.
+ This driver provides common support for accessing the device,
+ additional drivers must be enabled in order to use the
+ functionality of the device.
+
+config PCF50633_ADC
+ tristate "Support for NXP PCF50633 ADC"
+ depends on MFD_PCF50633
+ help
+ Say yes here if you want to include support for ADC in the
+ NXP PCF50633 chip.
+
+config PCF50633_GPIO
+ tristate "Support for NXP PCF50633 GPIO"
+ depends on MFD_PCF50633
+ help
+ Say yes here if you want to include support GPIO for pins on
+ the PCF50633 chip.
+
+config AB3100_CORE
+ tristate "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
+ depends on I2C
+ default y if ARCH_U300
+ help
+ Select this to enable the AB3100 Mixed Signal IC core
+ functionality. This connects to a AB3100 on the I2C bus
+ and expose a number of symbols needed for dependent devices
+ to read and write registers and subscribe to events from
+ this multi-functional IC. This is needed to use other features
+ of the AB3100 such as battery-backed RTC, charging control,
+ LEDs, vibrator, system power and temperature, power management
+ and ALSA sound.
+
+config AB3100_OTP
+ tristate "ST-Ericsson AB3100 OTP functions"
+ depends on AB3100_CORE
+ default y if AB3100_CORE
+ help
+ Select this to enable the AB3100 Mixed Signal IC OTP (one-time
+ programmable memory) support. This exposes a sysfs file to read
+ out OTP values.
+
+config EZX_PCAP
+ bool "PCAP Support"
+ depends on GENERIC_HARDIRQS && SPI_MASTER
+ help
+ This enables the PCAP ASIC present on EZX Phones. This is
+ needed for MMC, TouchScreen, Sound, USB, etc..
+
endmenu
menu "Multimedia Capabilities Port drivers"
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff