/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
#include <linux/config.h>
-#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/errno.h>
static void MptDisplayIocCapabilities(MPT_ADAPTER *ioc);
static int MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag);
-//static u32 mpt_GetIocState(MPT_ADAPTER *ioc, int cooked);
static int GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason);
static int GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag);
static int SendIocInit(MPT_ADAPTER *ioc, int sleepFlag);
static int SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag);
static int mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag);
-static int mpt_downloadboot(MPT_ADAPTER *ioc, int sleepFlag);
+static int mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag);
static int mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag);
static int KickStart(MPT_ADAPTER *ioc, int ignore, int sleepFlag);
static int SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag);
static int WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
static int WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
static int GetLanConfigPages(MPT_ADAPTER *ioc);
-static int GetFcPortPage0(MPT_ADAPTER *ioc, int portnum);
static int GetIoUnitPage2(MPT_ADAPTER *ioc);
+int mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode);
static int mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum);
static int mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum);
static void mpt_read_ioc_pg_1(MPT_ADAPTER *ioc);
static void mpt_timer_expired(unsigned long data);
static int SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch);
static int SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp);
+static int mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag);
+static int mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init);
#ifdef CONFIG_PROC_FS
static int procmpt_summary_read(char *buf, char **start, off_t offset,
static void mpt_sp_ioc_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf);
static void mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info);
static void mpt_sp_log_info(MPT_ADAPTER *ioc, u32 log_info);
+static void mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info);
/* module entry point */
static int __init fusion_init (void);
pci_write_config_word(pdev, PCI_COMMAND, command_reg);
}
+/*
+ * Process turbo (context) reply...
+ */
+static void
+mpt_turbo_reply(MPT_ADAPTER *ioc, u32 pa)
+{
+ MPT_FRAME_HDR *mf = NULL;
+ MPT_FRAME_HDR *mr = NULL;
+ int req_idx = 0;
+ int cb_idx;
+
+ dmfprintk((MYIOC_s_INFO_FMT "Got TURBO reply req_idx=%08x\n",
+ ioc->name, pa));
+
+ switch (pa >> MPI_CONTEXT_REPLY_TYPE_SHIFT) {
+ case MPI_CONTEXT_REPLY_TYPE_SCSI_INIT:
+ req_idx = pa & 0x0000FFFF;
+ cb_idx = (pa & 0x00FF0000) >> 16;
+ mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
+ break;
+ case MPI_CONTEXT_REPLY_TYPE_LAN:
+ cb_idx = mpt_lan_index;
+ /*
+ * Blind set of mf to NULL here was fatal
+ * after lan_reply says "freeme"
+ * Fix sort of combined with an optimization here;
+ * added explicit check for case where lan_reply
+ * was just returning 1 and doing nothing else.
+ * For this case skip the callback, but set up
+ * proper mf value first here:-)
+ */
+ if ((pa & 0x58000000) == 0x58000000) {
+ req_idx = pa & 0x0000FFFF;
+ mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
+ mpt_free_msg_frame(ioc, mf);
+ mb();
+ return;
+ break;
+ }
+ mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa);
+ break;
+ case MPI_CONTEXT_REPLY_TYPE_SCSI_TARGET:
+ cb_idx = mpt_stm_index;
+ mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa);
+ break;
+ default:
+ cb_idx = 0;
+ BUG();
+ }
+
+ /* Check for (valid) IO callback! */
+ if (cb_idx < 1 || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS ||
+ MptCallbacks[cb_idx] == NULL) {
+ printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n",
+ __FUNCTION__, ioc->name, cb_idx);
+ goto out;
+ }
+
+ if (MptCallbacks[cb_idx](ioc, mf, mr))
+ mpt_free_msg_frame(ioc, mf);
+ out:
+ mb();
+}
+
+static void
+mpt_reply(MPT_ADAPTER *ioc, u32 pa)
+{
+ MPT_FRAME_HDR *mf;
+ MPT_FRAME_HDR *mr;
+ int req_idx;
+ int cb_idx;
+ int freeme;
+
+ u32 reply_dma_low;
+ u16 ioc_stat;
+
+ /* non-TURBO reply! Hmmm, something may be up...
+ * Newest turbo reply mechanism; get address
+ * via left shift 1 (get rid of MPI_ADDRESS_REPLY_A_BIT)!
+ */
+
+ /* Map DMA address of reply header to cpu address.
+ * pa is 32 bits - but the dma address may be 32 or 64 bits
+ * get offset based only only the low addresses
+ */
+
+ reply_dma_low = (pa <<= 1);
+ mr = (MPT_FRAME_HDR *)((u8 *)ioc->reply_frames +
+ (reply_dma_low - ioc->reply_frames_low_dma));
+
+ req_idx = le16_to_cpu(mr->u.frame.hwhdr.msgctxu.fld.req_idx);
+ cb_idx = mr->u.frame.hwhdr.msgctxu.fld.cb_idx;
+ mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
+
+ dmfprintk((MYIOC_s_INFO_FMT "Got non-TURBO reply=%p req_idx=%x cb_idx=%x Function=%x\n",
+ ioc->name, mr, req_idx, cb_idx, mr->u.hdr.Function));
+ DBG_DUMP_REPLY_FRAME(mr)
+
+ /* Check/log IOC log info
+ */
+ ioc_stat = le16_to_cpu(mr->u.reply.IOCStatus);
+ if (ioc_stat & MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) {
+ u32 log_info = le32_to_cpu(mr->u.reply.IOCLogInfo);
+ if (ioc->bus_type == FC)
+ mpt_fc_log_info(ioc, log_info);
+ else if (ioc->bus_type == SPI)
+ mpt_sp_log_info(ioc, log_info);
+ else if (ioc->bus_type == SAS)
+ mpt_sas_log_info(ioc, log_info);
+ }
+ if (ioc_stat & MPI_IOCSTATUS_MASK) {
+ if (ioc->bus_type == SPI &&
+ cb_idx != mpt_stm_index &&
+ cb_idx != mpt_lan_index)
+ mpt_sp_ioc_info(ioc, (u32)ioc_stat, mf);
+ }
+
+
+ /* Check for (valid) IO callback! */
+ if (cb_idx < 1 || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS ||
+ MptCallbacks[cb_idx] == NULL) {
+ printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n",
+ __FUNCTION__, ioc->name, cb_idx);
+ freeme = 0;
+ goto out;
+ }
+
+ freeme = MptCallbacks[cb_idx](ioc, mf, mr);
+
+ out:
+ /* Flush (non-TURBO) reply with a WRITE! */
+ CHIPREG_WRITE32(&ioc->chip->ReplyFifo, pa);
+
+ if (freeme)
+ mpt_free_msg_frame(ioc, mf);
+ mb();
+}
+
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* mpt_interrupt - MPT adapter (IOC) specific interrupt handler.
* (also referred to as a IO Controller or IOC).
* This routine must clear the interrupt from the adapter and does
* so by reading the reply FIFO. Multiple replies may be processed
- * per single call to this routine; up to MPT_MAX_REPLIES_PER_ISR
- * which is currently set to 32 in mptbase.h.
+ * per single call to this routine.
*
* This routine handles register-level access of the adapter but
* dispatches (calls) a protocol-specific callback routine to handle
static irqreturn_t
mpt_interrupt(int irq, void *bus_id, struct pt_regs *r)
{
- MPT_ADAPTER *ioc;
- MPT_FRAME_HDR *mf;
- MPT_FRAME_HDR *mr;
- u32 pa;
- int req_idx;
- int cb_idx;
- int type;
- int freeme;
-
- ioc = (MPT_ADAPTER *)bus_id;
+ MPT_ADAPTER *ioc = bus_id;
+ u32 pa;
/*
* Drain the reply FIFO!
- *
- * NOTES: I've seen up to 10 replies processed in this loop, so far...
- * Update: I've seen up to 9182 replies processed in this loop! ??
- * Update: Limit ourselves to processing max of N replies
- * (bottom of loop).
*/
while (1) {
-
- if ((pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo)) == 0xFFFFFFFF)
+ pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo);
+ if (pa == 0xFFFFFFFF)
return IRQ_HANDLED;
-
- cb_idx = 0;
- freeme = 0;
-
- /*
- * Check for non-TURBO reply!
- */
- if (pa & MPI_ADDRESS_REPLY_A_BIT) {
- u32 reply_dma_low;
- u16 ioc_stat;
-
- /* non-TURBO reply! Hmmm, something may be up...
- * Newest turbo reply mechanism; get address
- * via left shift 1 (get rid of MPI_ADDRESS_REPLY_A_BIT)!
- */
-
- /* Map DMA address of reply header to cpu address.
- * pa is 32 bits - but the dma address may be 32 or 64 bits
- * get offset based only only the low addresses
- */
- reply_dma_low = (pa = (pa << 1));
- mr = (MPT_FRAME_HDR *)((u8 *)ioc->reply_frames +
- (reply_dma_low - ioc->reply_frames_low_dma));
-
- req_idx = le16_to_cpu(mr->u.frame.hwhdr.msgctxu.fld.req_idx);
- cb_idx = mr->u.frame.hwhdr.msgctxu.fld.cb_idx;
- mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
-
- dmfprintk((MYIOC_s_INFO_FMT "Got non-TURBO reply=%p req_idx=%x\n",
- ioc->name, mr, req_idx));
- DBG_DUMP_REPLY_FRAME(mr)
-
- /* Check/log IOC log info
- */
- ioc_stat = le16_to_cpu(mr->u.reply.IOCStatus);
- if (ioc_stat & MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) {
- u32 log_info = le32_to_cpu(mr->u.reply.IOCLogInfo);
- if (ioc->bus_type == FC)
- mpt_fc_log_info(ioc, log_info);
- else if (ioc->bus_type == SCSI)
- mpt_sp_log_info(ioc, log_info);
- }
- if (ioc_stat & MPI_IOCSTATUS_MASK) {
- if (ioc->bus_type == SCSI)
- mpt_sp_ioc_info(ioc, (u32)ioc_stat, mf);
- }
- } else {
- /*
- * Process turbo (context) reply...
- */
- dmfprintk((MYIOC_s_INFO_FMT "Got TURBO reply req_idx=%08x\n", ioc->name, pa));
- type = (pa >> MPI_CONTEXT_REPLY_TYPE_SHIFT);
- if (type == MPI_CONTEXT_REPLY_TYPE_SCSI_TARGET) {
- cb_idx = mpt_stm_index;
- mf = NULL;
- mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa);
- } else if (type == MPI_CONTEXT_REPLY_TYPE_LAN) {
- cb_idx = mpt_lan_index;
- /* Blind set of mf to NULL here was fatal
- * after lan_reply says "freeme"
- * Fix sort of combined with an optimization here;
- * added explicit check for case where lan_reply
- * was just returning 1 and doing nothing else.
- * For this case skip the callback, but set up
- * proper mf value first here:-)
- */
- if ((pa & 0x58000000) == 0x58000000) {
- req_idx = pa & 0x0000FFFF;
- mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
- freeme = 1;
- /*
- * IMPORTANT! Invalidate the callback!
- */
- cb_idx = 0;
- } else {
- mf = NULL;
- }
- mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa);
- } else {
- req_idx = pa & 0x0000FFFF;
- cb_idx = (pa & 0x00FF0000) >> 16;
- mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
- mr = NULL;
- }
- pa = 0; /* No reply flush! */
- }
-
-#ifdef MPT_DEBUG_IRQ
- if (ioc->bus_type == SCSI) {
- /* Verify mf, mr are reasonable.
- */
- if ((mf) && ((mf >= MPT_INDEX_2_MFPTR(ioc, ioc->req_depth))
- || (mf < ioc->req_frames)) ) {
- printk(MYIOC_s_WARN_FMT
- "mpt_interrupt: Invalid mf (%p) req_idx (%d)!\n", ioc->name, (void *)mf, req_idx);
- cb_idx = 0;
- pa = 0;
- freeme = 0;
- }
- if ((pa) && (mr) && ((mr >= MPT_INDEX_2_RFPTR(ioc, ioc->req_depth))
- || (mr < ioc->reply_frames)) ) {
- printk(MYIOC_s_WARN_FMT
- "mpt_interrupt: Invalid rf (%p)!\n", ioc->name, (void *)mr);
- cb_idx = 0;
- pa = 0;
- freeme = 0;
- }
- if (cb_idx > (MPT_MAX_PROTOCOL_DRIVERS-1)) {
- printk(MYIOC_s_WARN_FMT
- "mpt_interrupt: Invalid cb_idx (%d)!\n", ioc->name, cb_idx);
- cb_idx = 0;
- pa = 0;
- freeme = 0;
- }
- }
-#endif
-
- /* Check for (valid) IO callback! */
- if (cb_idx) {
- /* Do the callback! */
- freeme = (*(MptCallbacks[cb_idx]))(ioc, mf, mr);
- }
-
- if (pa) {
- /* Flush (non-TURBO) reply with a WRITE! */
- CHIPREG_WRITE32(&ioc->chip->ReplyFifo, pa);
- }
-
- if (freeme) {
- /* Put Request back on FreeQ! */
- mpt_free_msg_frame(ioc, mf);
- }
-
- mb();
- } /* drain reply FIFO */
+ else if (pa & MPI_ADDRESS_REPLY_A_BIT)
+ mpt_reply(ioc, pa);
+ else
+ mpt_turbo_reply(ioc, pa);
+ }
return IRQ_HANDLED;
}
* @mf: Pointer to original MPT request frame
* @reply: Pointer to MPT reply frame (NULL if TurboReply)
*
- * Returns 1 indicating original alloc'd request frame ptr
+ * Returns 1 indicating original alloc'd request frame ptr
* should be freed, or 0 if it shouldn't.
*/
static int
int freereq = 1;
u8 func;
- dprintk((MYIOC_s_INFO_FMT "mpt_base_reply() called\n", ioc->name));
-
- if ((mf == NULL) ||
- (mf >= MPT_INDEX_2_MFPTR(ioc, ioc->req_depth))) {
- printk(MYIOC_s_ERR_FMT "NULL or BAD request frame ptr! (=%p)\n",
- ioc->name, (void *)mf);
- return 1;
- }
-
- if (reply == NULL) {
- dprintk((MYIOC_s_ERR_FMT "Unexpected NULL Event (turbo?) reply!\n",
- ioc->name));
- return 1;
- }
+ dmfprintk((MYIOC_s_INFO_FMT "mpt_base_reply() called\n", ioc->name));
+#if defined(MPT_DEBUG_MSG_FRAME)
if (!(reply->u.hdr.MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY)) {
dmfprintk((KERN_INFO MYNAM ": Original request frame (@%p) header\n", mf));
DBG_DUMP_REQUEST_FRAME_HDR(mf)
}
+#endif
func = reply->u.hdr.Function;
- dprintk((MYIOC_s_INFO_FMT "mpt_base_reply, Function=%02Xh\n",
+ dmfprintk((MYIOC_s_INFO_FMT "mpt_base_reply, Function=%02Xh\n",
ioc->name, func));
if (func == MPI_FUNCTION_EVENT_NOTIFICATION) {
* Hmmm... It seems that EventNotificationReply is an exception
* to the rule of one reply per request.
*/
- if (pEvReply->MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY)
+ if (pEvReply->MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY) {
freereq = 0;
+ devtprintk((MYIOC_s_WARN_FMT "EVENT_NOTIFICATION reply %p does not return Request frame\n",
+ ioc->name, pEvReply));
+ } else {
+ devtprintk((MYIOC_s_WARN_FMT "EVENT_NOTIFICATION reply %p returns Request frame\n",
+ ioc->name, pEvReply));
+ }
#ifdef CONFIG_PROC_FS
// LogEvent(ioc, pEvReply);
pCfg->wait_done = 1;
wake_up(&mpt_waitq);
}
+ } else if (func == MPI_FUNCTION_SAS_IO_UNIT_CONTROL) {
+ /* we should be always getting a reply frame */
+ memcpy(ioc->persist_reply_frame, reply,
+ min(MPT_DEFAULT_FRAME_SIZE,
+ 4*reply->u.reply.MsgLength));
+ del_timer(&ioc->persist_timer);
+ ioc->persist_wait_done = 1;
+ wake_up(&mpt_waitq);
} else {
printk(MYIOC_s_ERR_FMT "Unexpected msg function (=%02Xh) reply received!\n",
ioc->name, func);
if (dd_cbfunc->remove)
dd_cbfunc->remove(ioc->pcidev);
}
-
+
MptDeviceDriverHandlers[cb_idx] = NULL;
}
mf = list_entry(ioc->FreeQ.next, MPT_FRAME_HDR,
u.frame.linkage.list);
list_del(&mf->u.frame.linkage.list);
+ mf->u.frame.linkage.arg1 = 0;
mf->u.frame.hwhdr.msgctxu.fld.cb_idx = handle; /* byte */
req_offset = (u8 *)mf - (u8 *)ioc->req_frames;
/* u16! */
}
#endif
- mf_dma_addr = (ioc->req_frames_low_dma + req_offset) | ioc->RequestNB[req_idx];
+ mf_dma_addr = (ioc->req_frames_low_dma + req_offset) | ioc->RequestNB[req_idx];
dsgprintk((MYIOC_s_INFO_FMT "mf_dma_addr=%x req_idx=%d RequestNB=%x\n", ioc->name, mf_dma_addr, req_idx, ioc->RequestNB[req_idx]));
CHIPREG_WRITE32(&ioc->chip->RequestFifo, mf_dma_addr);
}
/* Put Request back on FreeQ! */
spin_lock_irqsave(&ioc->FreeQlock, flags);
+ mf->u.frame.linkage.arg1 = 0xdeadbeaf; /* signature to know if this mf is freed */
list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeQ);
#ifdef MFCNT
ioc->mfcnt--;
/* Make sure there are no doorbells */
CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
-
+
CHIPREG_WRITE32(&ioc->chip->Doorbell,
((MPI_FUNCTION_HANDSHAKE<<MPI_DOORBELL_FUNCTION_SHIFT) |
((reqBytes/4)<<MPI_DOORBELL_ADD_DWORDS_SHIFT)));
return -5;
dhsprintk((KERN_INFO MYNAM ": %s: mpt_send_handshake_request start, WaitCnt=%d\n",
- ioc->name, ii));
+ ioc->name, ii));
CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) {
return -2;
}
-
+
/* Send request via doorbell handshake */
req_as_bytes = (u8 *) req;
for (ii = 0; ii < reqBytes/4; ii++) {
/* Make sure there are no doorbells */
CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
-
+
return r;
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
+ * mpt_host_page_access_control - provides mechanism for the host
+ * driver to control the IOC's Host Page Buffer access.
+ * @ioc: Pointer to MPT adapter structure
+ * @access_control_value: define bits below
+ *
+ * Access Control Value - bits[15:12]
+ * 0h Reserved
+ * 1h Enable Access { MPI_DB_HPBAC_ENABLE_ACCESS }
+ * 2h Disable Access { MPI_DB_HPBAC_DISABLE_ACCESS }
+ * 3h Free Buffer { MPI_DB_HPBAC_FREE_BUFFER }
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+
+static int
+mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag)
+{
+ int r = 0;
+
+ /* return if in use */
+ if (CHIPREG_READ32(&ioc->chip->Doorbell)
+ & MPI_DOORBELL_ACTIVE)
+ return -1;
+
+ CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
+
+ CHIPREG_WRITE32(&ioc->chip->Doorbell,
+ ((MPI_FUNCTION_HOST_PAGEBUF_ACCESS_CONTROL
+ <<MPI_DOORBELL_FUNCTION_SHIFT) |
+ (access_control_value<<12)));
+
+ /* Wait for IOC to clear Doorbell Status bit */
+ if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) {
+ return -2;
+ }else
+ return 0;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_host_page_alloc - allocate system memory for the fw
+ * If we already allocated memory in past, then resend the same pointer.
+ * ioc@: Pointer to pointer to IOC adapter
+ * ioc_init@: Pointer to ioc init config page
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init)
+{
+ char *psge;
+ int flags_length;
+ u32 host_page_buffer_sz=0;
+
+ if(!ioc->HostPageBuffer) {
+
+ host_page_buffer_sz =
+ le32_to_cpu(ioc->facts.HostPageBufferSGE.FlagsLength) & 0xFFFFFF;
+
+ if(!host_page_buffer_sz)
+ return 0; /* fw doesn't need any host buffers */
+
+ /* spin till we get enough memory */
+ while(host_page_buffer_sz > 0) {
+
+ if((ioc->HostPageBuffer = pci_alloc_consistent(
+ ioc->pcidev,
+ host_page_buffer_sz,
+ &ioc->HostPageBuffer_dma)) != NULL) {
+
+ dinitprintk((MYIOC_s_INFO_FMT
+ "host_page_buffer @ %p, dma @ %x, sz=%d bytes\n",
+ ioc->name,
+ ioc->HostPageBuffer,
+ ioc->HostPageBuffer_dma,
+ host_page_buffer_sz));
+ ioc->alloc_total += host_page_buffer_sz;
+ ioc->HostPageBuffer_sz = host_page_buffer_sz;
+ break;
+ }
+
+ host_page_buffer_sz -= (4*1024);
+ }
+ }
+
+ if(!ioc->HostPageBuffer) {
+ printk(MYIOC_s_ERR_FMT
+ "Failed to alloc memory for host_page_buffer!\n",
+ ioc->name);
+ return -999;
+ }
+
+ psge = (char *)&ioc_init->HostPageBufferSGE;
+ flags_length = MPI_SGE_FLAGS_SIMPLE_ELEMENT |
+ MPI_SGE_FLAGS_SYSTEM_ADDRESS |
+ MPI_SGE_FLAGS_32_BIT_ADDRESSING |
+ MPI_SGE_FLAGS_HOST_TO_IOC |
+ MPI_SGE_FLAGS_END_OF_BUFFER;
+ if (sizeof(dma_addr_t) == sizeof(u64)) {
+ flags_length |= MPI_SGE_FLAGS_64_BIT_ADDRESSING;
+ }
+ flags_length = flags_length << MPI_SGE_FLAGS_SHIFT;
+ flags_length |= ioc->HostPageBuffer_sz;
+ mpt_add_sge(psge, flags_length, ioc->HostPageBuffer_dma);
+ ioc->facts.HostPageBufferSGE = ioc_init->HostPageBufferSGE;
+
+return 0;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
* mpt_verify_adapter - Given a unique IOC identifier, set pointer to
* the associated MPT adapter structure.
* @iocid: IOC unique identifier (integer)
if (ioc->id == iocid) {
*iocpp =ioc;
return iocid;
- }
+ }
}
-
+
*iocpp = NULL;
return -1;
}
+int
+mpt_alt_ioc_wait(MPT_ADAPTER *ioc)
+{
+ int loop_count = 30 * 4; /* Wait 30 seconds */
+ int status = -1; /* -1 means failed to get board READY */
+
+ do {
+ spin_lock(&ioc->initializing_hba_lock);
+ if (ioc->initializing_hba_lock_flag == 0) {
+ ioc->initializing_hba_lock_flag=1;
+ spin_unlock(&ioc->initializing_hba_lock);
+ status = 0;
+ break;
+ }
+ spin_unlock(&ioc->initializing_hba_lock);
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(HZ/4);
+ } while (--loop_count);
+
+ return status;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * mpt_bringup_adapter - This is a wrapper function for mpt_do_ioc_recovery
+ * @ioc: Pointer to MPT adapter structure
+ * @sleepFlag: Use schedule if CAN_SLEEP else use udelay.
+ *
+ * This routine performs all the steps necessary to bring the IOC
+ * to a OPERATIONAL state.
+ *
+ * Special Note: This function was added with spin lock's so as to allow
+ * the dv(domain validation) work thread to succeed on the other channel
+ * that maybe occuring at the same time when this function is called.
+ * Without this lock, the dv would fail when message frames were
+ * requested during hba bringup on the alternate ioc.
+ */
+static int
+mpt_bringup_adapter(MPT_ADAPTER *ioc, int sleepFlag)
+{
+ int r;
+
+ if(ioc->alt_ioc) {
+ if((r=mpt_alt_ioc_wait(ioc->alt_ioc)!=0))
+ return r;
+ }
+
+ r = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP,
+ CAN_SLEEP);
+
+ if(ioc->alt_ioc) {
+ spin_lock(&ioc->alt_ioc->initializing_hba_lock);
+ ioc->alt_ioc->initializing_hba_lock_flag=0;
+ spin_unlock(&ioc->alt_ioc->initializing_hba_lock);
+ }
+
+return r;
+}
+
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* mpt_attach - Install a PCI intelligent MPT adapter.
if (pci_enable_device(pdev))
return r;
-
+
dinitprintk((KERN_WARNING MYNAM ": mpt_adapter_install\n"));
-
+
if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
dprintk((KERN_INFO MYNAM
": 64 BIT PCI BUS DMA ADDRESSING SUPPORTED\n"));
dprintk((KERN_INFO MYNAM
": Not using 64 bit consistent mask\n"));
- ioc = kmalloc(sizeof(MPT_ADAPTER), GFP_ATOMIC);
+ ioc = kzalloc(sizeof(MPT_ADAPTER), GFP_ATOMIC);
if (ioc == NULL) {
printk(KERN_ERR MYNAM ": ERROR - Insufficient memory to add adapter!\n");
return -ENOMEM;
}
- memset(ioc, 0, sizeof(MPT_ADAPTER));
ioc->alloc_total = sizeof(MPT_ADAPTER);
ioc->req_sz = MPT_DEFAULT_FRAME_SIZE; /* avoid div by zero! */
ioc->reply_sz = MPT_REPLY_FRAME_SIZE;
-
+
ioc->pcidev = pdev;
ioc->diagPending = 0;
spin_lock_init(&ioc->diagLock);
+ spin_lock_init(&ioc->fc_rescan_work_lock);
+ spin_lock_init(&ioc->fc_rport_lock);
+ spin_lock_init(&ioc->initializing_hba_lock);
/* Initialize the event logging.
*/
/* Initilize SCSI Config Data structure
*/
- memset(&ioc->spi_data, 0, sizeof(ScsiCfgData));
+ memset(&ioc->spi_data, 0, sizeof(SpiCfgData));
/* Initialize the running configQ head.
*/
INIT_LIST_HEAD(&ioc->configQ);
+ /* Initialize the fc rport list head.
+ */
+ INIT_LIST_HEAD(&ioc->fc_rports);
+
/* Find lookup slot. */
INIT_LIST_HEAD(&ioc->list);
ioc->id = mpt_ids++;
-
+
mem_phys = msize = 0;
port = psize = 0;
for (ii=0; ii < DEVICE_COUNT_RESOURCE; ii++) {
ioc->prod_name = "LSIFC909";
ioc->bus_type = FC;
}
- if (pdev->device == MPI_MANUFACTPAGE_DEVICEID_FC929) {
+ else if (pdev->device == MPI_MANUFACTPAGE_DEVICEID_FC929) {
ioc->prod_name = "LSIFC929";
ioc->bus_type = FC;
}
ioc->bus_type = FC;
ioc->errata_flag_1064 = 1;
}
+ else if (pdev->device == MPI_MANUFACTPAGE_DEVICEID_FC949E) {
+ ioc->prod_name = "LSIFC949E";
+ ioc->bus_type = FC;
+ }
else if (pdev->device == MPI_MANUFACTPAGE_DEVID_53C1030) {
ioc->prod_name = "LSI53C1030";
- ioc->bus_type = SCSI;
+ ioc->bus_type = SPI;
/* 1030 Chip Fix. Disable Split transactions
* for PCIX. Set MOST bits to zero if Rev < C0( = 8).
*/
}
else if (pdev->device == MPI_MANUFACTPAGE_DEVID_1030_53C1035) {
ioc->prod_name = "LSI53C1035";
- ioc->bus_type = SCSI;
+ ioc->bus_type = SPI;
+ }
+ else if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1064) {
+ ioc->prod_name = "LSISAS1064";
+ ioc->bus_type = SAS;
+ ioc->errata_flag_1064 = 1;
+ }
+ else if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1066) {
+ ioc->prod_name = "LSISAS1066";
+ ioc->bus_type = SAS;
+ ioc->errata_flag_1064 = 1;
+ }
+ else if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1068) {
+ ioc->prod_name = "LSISAS1068";
+ ioc->bus_type = SAS;
+ ioc->errata_flag_1064 = 1;
+ }
+ else if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1064E) {
+ ioc->prod_name = "LSISAS1064E";
+ ioc->bus_type = SAS;
+ }
+ else if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1066E) {
+ ioc->prod_name = "LSISAS1066E";
+ ioc->bus_type = SAS;
+ }
+ else if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1068E) {
+ ioc->prod_name = "LSISAS1068E";
+ ioc->bus_type = SAS;
}
if (ioc->errata_flag_1064)
*/
mpt_detect_bound_ports(ioc, pdev);
- if ((r = mpt_do_ioc_recovery(ioc,
- MPT_HOSTEVENT_IOC_BRINGUP, CAN_SLEEP)) != 0) {
+ if ((r = mpt_bringup_adapter(ioc, CAN_SLEEP)) != 0){
printk(KERN_WARNING MYNAM
": WARNING - %s did not initialize properly! (%d)\n",
ioc->name, r);
remove_proc_entry(pname, NULL);
sprintf(pname, MPT_PROCFS_MPTBASEDIR "/%s", ioc->name);
remove_proc_entry(pname, NULL);
-
+
/* call per device driver remove entry point */
for(ii=0; ii<MPT_MAX_PROTOCOL_DRIVERS; ii++) {
if(MptDeviceDriverHandlers[ii] &&
MptDeviceDriverHandlers[ii]->remove(pdev);
}
}
-
+
/* Disable interrupts! */
CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
u32 device_state = pdev->current_state;
int recovery_state;
int ii;
-
+
printk(MYIOC_s_INFO_FMT
"pci-resume: pdev=0x%p, slot=%s, Previous operating state [D%d]\n",
ioc->name, pdev, pci_name(pdev), device_state);
pci_enable_device(pdev);
/* enable interrupts */
- CHIPREG_WRITE32(&ioc->chip->IntMask, ~(MPI_HIM_RIM));
+ CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM);
ioc->active = 1;
/* F/W not running */
/* (re)Enable alt-IOC! (reply interrupt, FreeQ) */
dprintk((KERN_INFO MYNAM ": alt-%s reply irq re-enabled\n",
ioc->alt_ioc->name));
- CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, ~(MPI_HIM_RIM));
+ CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, MPI_HIM_DIM);
ioc->alt_ioc->active = 1;
}
if ((rc = GetIocFacts(ioc, sleepFlag, reason)) == 0)
break;
}
-
+
if (ii == 5) {
dinitprintk((MYIOC_s_INFO_FMT "Retry IocFacts failed rc=%x\n", ioc->name, rc));
} else if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
MptDisplayIocCapabilities(ioc);
}
-
+
if (alt_ioc_ready) {
if ((rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason)) != 0) {
dinitprintk((MYIOC_s_INFO_FMT "Initial Alt IocFacts failed rc=%x\n", ioc->name, rc));
*/
if (ret == 0) {
rc = mpt_do_upload(ioc, sleepFlag);
- if (rc != 0)
+ if (rc == 0) {
+ if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) {
+ /*
+ * Maintain only one pointer to FW memory
+ * so there will not be two attempt to
+ * downloadboot onboard dual function
+ * chips (mpt_adapter_disable,
+ * mpt_diag_reset)
+ */
+ ioc->cached_fw = NULL;
+ ddlprintk((MYIOC_s_INFO_FMT ": mpt_upload: alt_%s has cached_fw=%p \n",
+ ioc->name, ioc->alt_ioc->name, ioc->alt_ioc->cached_fw));
+ }
+ } else {
printk(KERN_WARNING MYNAM ": firmware upload failure!\n");
+ ret = -5;
+ }
}
}
}
if (ret == 0) {
/* Enable! (reply interrupt) */
- CHIPREG_WRITE32(&ioc->chip->IntMask, ~(MPI_HIM_RIM));
+ CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM);
ioc->active = 1;
}
if (reset_alt_ioc_active && ioc->alt_ioc) {
/* (re)Enable alt-IOC! (reply interrupt) */
- dprintk((KERN_INFO MYNAM ": alt-%s reply irq re-enabled\n",
+ dinitprintk((KERN_INFO MYNAM ": alt-%s reply irq re-enabled\n",
ioc->alt_ioc->name));
- CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, ~(MPI_HIM_RIM));
+ CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, MPI_HIM_DIM);
ioc->alt_ioc->active = 1;
}
* and we try GetLanConfigPages again...
*/
if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) {
- if (ioc->bus_type == FC) {
+ if (ioc->bus_type == SAS) {
+
+ /* clear persistency table */
+ if(ioc->facts.IOCExceptions &
+ MPI_IOCFACTS_EXCEPT_PERSISTENT_TABLE_FULL) {
+ ret = mptbase_sas_persist_operation(ioc,
+ MPI_SAS_OP_CLEAR_NOT_PRESENT);
+ if(ret != 0)
+ return -1;
+ }
+
+ /* Find IM volumes
+ */
+ mpt_findImVolumes(ioc);
+
+ } else if (ioc->bus_type == FC) {
/*
* Pre-fetch FC port WWN and stuff...
* (FCPortPage0_t stuff)
*/
for (ii=0; ii < ioc->facts.NumberOfPorts; ii++) {
- (void) GetFcPortPage0(ioc, ii);
+ (void) mptbase_GetFcPortPage0(ioc, ii);
}
if ((ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) &&
/* Find IM volumes
*/
- if (ioc->facts.MsgVersion >= 0x0102)
+ if (ioc->facts.MsgVersion >= MPI_VERSION_01_02)
mpt_findImVolumes(ioc);
/* Check, and possibly reset, the coalescing value
}
if (alt_ioc_ready && MptResetHandlers[ii]) {
- dprintk((MYIOC_s_INFO_FMT "Calling alt-%s post_reset handler #%d\n",
+ drsprintk((MYIOC_s_INFO_FMT "Calling alt-%s post_reset handler #%d\n",
ioc->name, ioc->alt_ioc->name, ii));
rc += (*(MptResetHandlers[ii]))(ioc->alt_ioc, MPT_IOC_POST_RESET);
handlers++;
dprintk((MYIOC_s_INFO_FMT "PCI device %s devfn=%x/%x,"
" searching for devfn match on %x or %x\n",
- ioc->name, pci_name(pdev), pdev->devfn,
- func-1, func+1));
+ ioc->name, pci_name(pdev), pdev->bus->number,
+ pdev->devfn, func-1, func+1));
peer = pci_get_slot(pdev->bus, PCI_DEVFN(slot,func-1));
if (!peer) {
if (ioc->cached_fw != NULL) {
ddlprintk((KERN_INFO MYNAM ": mpt_adapter_disable: Pushing FW onto adapter\n"));
- if ((ret = mpt_downloadboot(ioc, NO_SLEEP)) < 0) {
+ if ((ret = mpt_downloadboot(ioc, (MpiFwHeader_t *)ioc->cached_fw, NO_SLEEP)) < 0) {
printk(KERN_WARNING MYNAM
": firmware downloadboot failure (%d)!\n", ret);
}
}
kfree(ioc->spi_data.nvram);
- kfree(ioc->spi_data.pIocPg3);
+ kfree(ioc->raid_data.pIocPg3);
ioc->spi_data.nvram = NULL;
- ioc->spi_data.pIocPg3 = NULL;
+ ioc->raid_data.pIocPg3 = NULL;
if (ioc->spi_data.pIocPg4 != NULL) {
sz = ioc->spi_data.IocPg4Sz;
kfree(ioc->ChainToChain);
ioc->ChainToChain = NULL;
+
+ if (ioc->HostPageBuffer != NULL) {
+ if((ret = mpt_host_page_access_control(ioc,
+ MPI_DB_HPBAC_FREE_BUFFER, NO_SLEEP)) != 0) {
+ printk(KERN_ERR MYNAM
+ ": %s: host page buffers free failed (%d)!\n",
+ __FUNCTION__, ret);
+ }
+ dexitprintk((KERN_INFO MYNAM ": %s HostPageBuffer free @ %p, sz=%d bytes\n",
+ ioc->name, ioc->HostPageBuffer, ioc->HostPageBuffer_sz));
+ pci_free_consistent(ioc->pcidev, ioc->HostPageBuffer_sz,
+ ioc->HostPageBuffer,
+ ioc->HostPageBuffer_dma);
+ ioc->HostPageBuffer = NULL;
+ ioc->HostPageBuffer_sz = 0;
+ ioc->alloc_total -= ioc->HostPageBuffer_sz;
+ }
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
static void
mpt_adapter_dispose(MPT_ADAPTER *ioc)
{
- if (ioc != NULL) {
- int sz_first, sz_last;
+ int sz_first, sz_last;
- sz_first = ioc->alloc_total;
+ if (ioc == NULL)
+ return;
- mpt_adapter_disable(ioc);
+ sz_first = ioc->alloc_total;
- if (ioc->pci_irq != -1) {
- free_irq(ioc->pci_irq, ioc);
- ioc->pci_irq = -1;
- }
+ mpt_adapter_disable(ioc);
- if (ioc->memmap != NULL)
- iounmap(ioc->memmap);
+ if (ioc->pci_irq != -1) {
+ free_irq(ioc->pci_irq, ioc);
+ ioc->pci_irq = -1;
+ }
+
+ if (ioc->memmap != NULL) {
+ iounmap(ioc->memmap);
+ ioc->memmap = NULL;
+ }
#if defined(CONFIG_MTRR) && 0
- if (ioc->mtrr_reg > 0) {
- mtrr_del(ioc->mtrr_reg, 0, 0);
- dprintk((KERN_INFO MYNAM ": %s: MTRR region de-registered\n", ioc->name));
- }
+ if (ioc->mtrr_reg > 0) {
+ mtrr_del(ioc->mtrr_reg, 0, 0);
+ dprintk((KERN_INFO MYNAM ": %s: MTRR region de-registered\n", ioc->name));
+ }
#endif
- /* Zap the adapter lookup ptr! */
- list_del(&ioc->list);
+ /* Zap the adapter lookup ptr! */
+ list_del(&ioc->list);
- sz_last = ioc->alloc_total;
- dprintk((KERN_INFO MYNAM ": %s: free'd %d of %d bytes\n",
- ioc->name, sz_first-sz_last+(int)sizeof(*ioc), sz_first));
- kfree(ioc);
- }
+ sz_last = ioc->alloc_total;
+ dprintk((KERN_INFO MYNAM ": %s: free'd %d of %d bytes\n",
+ ioc->name, sz_first-sz_last+(int)sizeof(*ioc), sz_first));
+ kfree(ioc);
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
}
/* Is it already READY? */
- if (!statefault && (ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_READY)
+ if (!statefault && (ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_READY)
return 0;
/*
* Hmmm... Did it get left operational?
*/
if ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_OPERATIONAL) {
- dinitprintk((MYIOC_s_WARN_FMT "IOC operational unexpected\n",
+ dinitprintk((MYIOC_s_INFO_FMT "IOC operational unexpected\n",
ioc->name));
/* Check WhoInit.
* Else, fall through to KickStart case
*/
whoinit = (ioc_state & MPI_DOORBELL_WHO_INIT_MASK) >> MPI_DOORBELL_WHO_INIT_SHIFT;
- dprintk((KERN_WARNING MYNAM
- ": whoinit 0x%x\n statefault %d force %d\n",
+ dinitprintk((KERN_INFO MYNAM
+ ": whoinit 0x%x statefault %d force %d\n",
whoinit, statefault, force));
if (whoinit == MPI_WHOINIT_PCI_PEER)
return -4;
* Loop here waiting for IOC to come READY.
*/
ii = 0;
- cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 15; /* 15 seconds */
+ cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 5; /* 5 seconds */
while ((ioc_state = mpt_GetIocState(ioc, 1)) != MPI_IOC_STATE_READY) {
if (ioc_state == MPI_IOC_STATE_OPERATIONAL) {
get_facts.Function = MPI_FUNCTION_IOC_FACTS;
/* Assert: All other get_facts fields are zero! */
- dinitprintk((MYIOC_s_INFO_FMT
- "Sending get IocFacts request req_sz=%d reply_sz=%d\n",
+ dinitprintk((MYIOC_s_INFO_FMT
+ "Sending get IocFacts request req_sz=%d reply_sz=%d\n",
ioc->name, req_sz, reply_sz));
/* No non-zero fields in the get_facts request are greater than
le32_to_cpu(facts->CurrentSenseBufferHighAddr);
facts->CurReplyFrameSize =
le16_to_cpu(facts->CurReplyFrameSize);
+ facts->IOCCapabilities = le32_to_cpu(facts->IOCCapabilities);
/*
* Handle NEW (!) IOCFactsReply fields in MPI-1.01.xx
if ( sz & 0x02 )
sz += 2;
facts->FWImageSize = sz;
-
+
if (!facts->RequestFrameSize) {
/* Something is wrong! */
printk(MYIOC_s_ERR_FMT "IOC reported invalid 0 request size!\n",
ioc->NBShiftFactor = shiftFactor;
dinitprintk((MYIOC_s_INFO_FMT "NB_for_64_byte_frame=%x NBShiftFactor=%x BlockSize=%x\n",
ioc->name, vv, shiftFactor, r));
-
+
if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
/*
* Set values for this IOC's request & reply frame sizes,
return r;
}
} else {
- printk(MYIOC_s_ERR_FMT
+ printk(MYIOC_s_ERR_FMT
"Invalid IOC facts reply, msgLength=%d offsetof=%zd!\n",
ioc->name, facts->MsgLength, (offsetof(IOCFactsReply_t,
RequestFrameSize)/sizeof(u32)));
ddlprintk((MYIOC_s_INFO_FMT "upload_fw %d facts.Flags=%x\n",
ioc->name, ioc->upload_fw, ioc->facts.Flags));
- if (ioc->bus_type == FC)
+ if(ioc->bus_type == SAS)
+ ioc_init.MaxDevices = ioc->facts.MaxDevices;
+ else if(ioc->bus_type == FC)
ioc_init.MaxDevices = MPT_MAX_FC_DEVICES;
else
ioc_init.MaxDevices = MPT_MAX_SCSI_DEVICES;
-
ioc_init.MaxBuses = MPT_MAX_BUS;
-
+ dinitprintk((MYIOC_s_INFO_FMT "facts.MsgVersion=%x\n",
+ ioc->name, ioc->facts.MsgVersion));
+ if (ioc->facts.MsgVersion >= MPI_VERSION_01_05) {
+ // set MsgVersion and HeaderVersion host driver was built with
+ ioc_init.MsgVersion = cpu_to_le16(MPI_VERSION);
+ ioc_init.HeaderVersion = cpu_to_le16(MPI_HEADER_VERSION);
+
+ if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_HOST_PAGE_BUFFER_PERSISTENT) {
+ ioc_init.HostPageBufferSGE = ioc->facts.HostPageBufferSGE;
+ } else if(mpt_host_page_alloc(ioc, &ioc_init))
+ return -99;
+ }
ioc_init.ReplyFrameSize = cpu_to_le16(ioc->reply_sz); /* in BYTES */
if (sizeof(dma_addr_t) == sizeof(u64)) {
ioc_init.HostMfaHighAddr = cpu_to_le32(0);
ioc_init.SenseBufferHighAddr = cpu_to_le32(0);
}
-
+
ioc->facts.CurrentHostMfaHighAddr = ioc_init.HostMfaHighAddr;
ioc->facts.CurrentSenseBufferHighAddr = ioc_init.SenseBufferHighAddr;
+ ioc->facts.MaxDevices = ioc_init.MaxDevices;
+ ioc->facts.MaxBuses = ioc_init.MaxBuses;
dhsprintk((MYIOC_s_INFO_FMT "Sending IOCInit (req @ %p)\n",
ioc->name, &ioc_init));
r = mpt_handshake_req_reply_wait(ioc, sizeof(IOCInit_t), (u32*)&ioc_init,
sizeof(MPIDefaultReply_t), (u16*)&init_reply, 10 /*seconds*/, sleepFlag);
- if (r != 0)
+ if (r != 0) {
+ printk(MYIOC_s_ERR_FMT "Sending IOCInit failed(%d)!\n",ioc->name, r);
return r;
+ }
/* No need to byte swap the multibyte fields in the reply
* since we don't even look at it's contents.
dhsprintk((MYIOC_s_INFO_FMT "Sending PortEnable (req @ %p)\n",
ioc->name, &ioc_init));
-
- if ((r = SendPortEnable(ioc, 0, sleepFlag)) != 0)
+
+ if ((r = SendPortEnable(ioc, 0, sleepFlag)) != 0) {
+ printk(MYIOC_s_ERR_FMT "Sending PortEnable failed(%d)!\n",ioc->name, r);
return r;
+ }
/* YIKES! SUPER IMPORTANT!!!
* Poll IocState until _OPERATIONAL while IOC is doing
state = mpt_GetIocState(ioc, 1);
count++;
}
- dhsprintk((MYIOC_s_INFO_FMT "INFO - Wait IOC_OPERATIONAL state (cnt=%d)\n",
+ dinitprintk((MYIOC_s_INFO_FMT "INFO - Wait IOC_OPERATIONAL state (cnt=%d)\n",
ioc->name, count));
return r;
{
PortEnable_t port_enable;
MPIDefaultReply_t reply_buf;
- int ii;
+ int rc;
int req_sz;
int reply_sz;
/* RAID FW may take a long time to enable
*/
- if (ioc->bus_type == FC) {
- ii = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&port_enable,
- reply_sz, (u16*)&reply_buf, 65 /*seconds*/, sleepFlag);
+ if (((ioc->facts.ProductID & MPI_FW_HEADER_PID_PROD_MASK)
+ > MPI_FW_HEADER_PID_PROD_TARGET_SCSI) ||
+ (ioc->bus_type == SAS)) {
+ rc = mpt_handshake_req_reply_wait(ioc, req_sz,
+ (u32*)&port_enable, reply_sz, (u16*)&reply_buf,
+ 300 /*seconds*/, sleepFlag);
} else {
- ii = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&port_enable,
- reply_sz, (u16*)&reply_buf, 300 /*seconds*/, sleepFlag);
+ rc = mpt_handshake_req_reply_wait(ioc, req_sz,
+ (u32*)&port_enable, reply_sz, (u16*)&reply_buf,
+ 30 /*seconds*/, sleepFlag);
}
-
- if (ii != 0)
- return ii;
-
- /* We do not even look at the reply, so we need not
- * swap the multi-byte fields.
- */
-
- return 0;
+ return rc;
}
/*
int sz;
sz = ioc->facts.FWImageSize;
- dinitprintk((KERN_WARNING MYNAM "free_fw_memory: FW Image @ %p[%p], sz=%d[%x] bytes\n",
+ dinitprintk((KERN_INFO MYNAM "free_fw_memory: FW Image @ %p[%p], sz=%d[%x] bytes\n",
ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz));
pci_free_consistent(ioc->pcidev, sz,
ioc->cached_fw, ioc->cached_fw_dma);
mpt_alloc_fw_memory(ioc, sz);
- dinitprintk((KERN_WARNING MYNAM ": FW Image @ %p[%p], sz=%d[%x] bytes\n",
+ dinitprintk((KERN_INFO MYNAM ": FW Image @ %p[%p], sz=%d[%x] bytes\n",
ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz));
-
+
if (ioc->cached_fw == NULL) {
/* Major Failure.
*/
mpt_add_sge(&request[sgeoffset], flagsLength, ioc->cached_fw_dma);
sgeoffset += sizeof(u32) + sizeof(dma_addr_t);
- dinitprintk((KERN_WARNING MYNAM "Sending FW Upload (req @ %p) sgeoffset=%d \n",
+ dinitprintk((KERN_INFO MYNAM ": Sending FW Upload (req @ %p) sgeoffset=%d \n",
prequest, sgeoffset));
DBG_DUMP_FW_REQUEST_FRAME(prequest)
ii = mpt_handshake_req_reply_wait(ioc, sgeoffset, (u32*)prequest,
reply_sz, (u16*)preply, 65 /*seconds*/, sleepFlag);
- dinitprintk((KERN_WARNING MYNAM "FW Upload completed rc=%x \n", ii));
+ dinitprintk((KERN_INFO MYNAM ": FW Upload completed rc=%x \n", ii));
cmdStatus = -EFAULT;
if (ii == 0) {
cmdStatus = 0;
}
}
- dinitprintk((MYIOC_s_INFO_FMT ": do_upload status %d \n",
+ dinitprintk((MYIOC_s_INFO_FMT ": do_upload cmdStatus=%d \n",
ioc->name, cmdStatus));
-
+
if (cmdStatus) {
ddlprintk((MYIOC_s_INFO_FMT ": fw upload failed, freeing image \n",
* <0 for fw upload failure.
*/
static int
-mpt_downloadboot(MPT_ADAPTER *ioc, int sleepFlag)
+mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag)
{
- MpiFwHeader_t *pFwHeader;
MpiExtImageHeader_t *pExtImage;
u32 fwSize;
u32 diag0val;
u32 load_addr;
u32 ioc_state=0;
- ddlprintk((MYIOC_s_INFO_FMT "downloadboot: fw size 0x%x, ioc FW Ptr %p\n",
- ioc->name, ioc->facts.FWImageSize, ioc->cached_fw));
-
- if ( ioc->facts.FWImageSize == 0 )
- return -1;
-
- if (ioc->cached_fw == NULL)
- return -2;
-
- /* prevent a second downloadboot and memory free with alt_ioc */
- if (ioc->alt_ioc && ioc->alt_ioc->cached_fw)
- ioc->alt_ioc->cached_fw = NULL;
+ ddlprintk((MYIOC_s_INFO_FMT "downloadboot: fw size 0x%x (%d), FW Ptr %p\n",
+ ioc->name, pFwHeader->ImageSize, pFwHeader->ImageSize, pFwHeader));
CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
ioc->name, count));
break;
}
- /* wait 1 sec */
+ /* wait .1 sec */
if (sleepFlag == CAN_SLEEP) {
- msleep_interruptible (1000);
+ msleep_interruptible (100);
} else {
- mdelay (1000);
+ mdelay (100);
}
}
if ( count == 30 ) {
- ddlprintk((MYIOC_s_INFO_FMT "downloadboot failed! Unable to RESET_ADAPTER diag0val=%x\n",
+ ddlprintk((MYIOC_s_INFO_FMT "downloadboot failed! "
+ "Unable to get MPI_DIAG_DRWE mode, diag0val=%x\n",
ioc->name, diag0val));
return -3;
}
/* Set the DiagRwEn and Disable ARM bits */
CHIPREG_WRITE32(&ioc->chip->Diagnostic, (MPI_DIAG_RW_ENABLE | MPI_DIAG_DISABLE_ARM));
- pFwHeader = (MpiFwHeader_t *) ioc->cached_fw;
fwSize = (pFwHeader->ImageSize + 3)/4;
ptrFw = (u32 *) pFwHeader;
fwSize = (pExtImage->ImageSize + 3) >> 2;
ptrFw = (u32 *)pExtImage;
- ddlprintk((MYIOC_s_INFO_FMT "Write Ext Image: 0x%x bytes @ %p load_addr=%x\n",
- ioc->name, fwSize*4, ptrFw, load_addr));
+ ddlprintk((MYIOC_s_INFO_FMT "Write Ext Image: 0x%x (%d) bytes @ %p load_addr=%x\n",
+ ioc->name, fwSize*4, fwSize*4, ptrFw, load_addr));
CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, load_addr);
while (fwSize--) {
/* Clear the internal flash bad bit - autoincrementing register,
* so must do two writes.
*/
- CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000);
- diagRwData = CHIPREG_PIO_READ32(&ioc->pio_chip->DiagRwData);
- diagRwData |= 0x4000000;
- CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000);
- CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, diagRwData);
+ if (ioc->bus_type == SPI) {
+ /*
+ * 1030 and 1035 H/W errata, workaround to access
+ * the ClearFlashBadSignatureBit
+ */
+ CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000);
+ diagRwData = CHIPREG_PIO_READ32(&ioc->pio_chip->DiagRwData);
+ diagRwData |= 0x40000000;
+ CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000);
+ CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, diagRwData);
+
+ } else /* if((ioc->bus_type == SAS) || (ioc->bus_type == FC)) */ {
+ diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
+ CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val |
+ MPI_DIAG_CLEAR_FLASH_BAD_SIG);
+
+ /* wait 1 msec */
+ if (sleepFlag == CAN_SLEEP) {
+ msleep_interruptible (1);
+ } else {
+ mdelay (1);
+ }
+ }
if (ioc->errata_flag_1064)
pci_disable_io_access(ioc->pcidev);
diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
- ddlprintk((MYIOC_s_INFO_FMT "downloadboot diag0val=%x, turning off PREVENT_IOC_BOOT, DISABLE_ARM\n",
+ ddlprintk((MYIOC_s_INFO_FMT "downloadboot diag0val=%x, "
+ "turning off PREVENT_IOC_BOOT, DISABLE_ARM, RW_ENABLE\n",
ioc->name, diag0val));
- diag0val &= ~(MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM);
+ diag0val &= ~(MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM | MPI_DIAG_RW_ENABLE);
ddlprintk((MYIOC_s_INFO_FMT "downloadboot now diag0val=%x\n",
ioc->name, diag0val));
CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val);
/* Write 0xFF to reset the sequencer */
CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
+ if (ioc->bus_type == SAS) {
+ ioc_state = mpt_GetIocState(ioc, 0);
+ if ( (GetIocFacts(ioc, sleepFlag,
+ MPT_HOSTEVENT_IOC_BRINGUP)) != 0 ) {
+ ddlprintk((MYIOC_s_INFO_FMT "GetIocFacts failed: IocState=%x\n",
+ ioc->name, ioc_state));
+ return -EFAULT;
+ }
+ }
+
for (count=0; count<HZ*20; count++) {
if ((ioc_state = mpt_GetIocState(ioc, 0)) & MPI_IOC_STATE_READY) {
ddlprintk((MYIOC_s_INFO_FMT "downloadboot successful! (count=%d) IocState=%x\n",
ioc->name, count, ioc_state));
+ if (ioc->bus_type == SAS) {
+ return 0;
+ }
if ((SendIocInit(ioc, sleepFlag)) != 0) {
ddlprintk((MYIOC_s_INFO_FMT "downloadboot: SendIocInit failed\n",
ioc->name));
* 0 else
*
* Returns:
- * 1 - hard reset, READY
- * 0 - no reset due to History bit, READY
- * -1 - no reset due to History bit but not READY
+ * 1 - hard reset, READY
+ * 0 - no reset due to History bit, READY
+ * -1 - no reset due to History bit but not READY
* OR reset but failed to come READY
* -2 - no reset, could not enter DIAG mode
* -3 - reset but bad FW bit
int cnt,cntdn;
dinitprintk((KERN_WARNING MYNAM ": KickStarting %s!\n", ioc->name));
- if (ioc->bus_type == SCSI) {
+ if (ioc->bus_type == SPI) {
/* Always issue a Msg Unit Reset first. This will clear some
* SCSI bus hang conditions.
*/
*
*/
CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_DISABLE_ARM);
- mdelay (1);
+ mdelay(1);
/*
* Now hit the reset bit in the Diagnostic register
/* wait 1 sec */
if (sleepFlag == CAN_SLEEP) {
- ssleep(1);
+ msleep_interruptible (1000);
} else {
mdelay (1000);
}
}
- if ((count = mpt_downloadboot(ioc, sleepFlag)) < 0) {
+ if ((count = mpt_downloadboot(ioc,
+ (MpiFwHeader_t *)ioc->cached_fw, sleepFlag)) < 0) {
printk(KERN_WARNING MYNAM
": firmware downloadboot failure (%d)!\n", count);
}
u32 state;
int cntdn, count;
- drsprintk((KERN_WARNING MYNAM ": %s: Sending IOC reset(0x%02x)!\n",
+ drsprintk((KERN_INFO MYNAM ": %s: Sending IOC reset(0x%02x)!\n",
ioc->name, reset_type));
CHIPREG_WRITE32(&ioc->chip->Doorbell, reset_type<<MPI_DOORBELL_FUNCTION_SHIFT);
if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
dinitprintk((KERN_INFO MYNAM ": %s Now numSGE=%d num_sge=%d num_chain=%d\n",
ioc->name, numSGE, num_sge, num_chain));
- if (ioc->bus_type == SCSI)
+ if (ioc->bus_type == SPI)
num_chain *= MPT_SCSI_CAN_QUEUE;
else
num_chain *= MPT_FC_CAN_QUEUE;
ioc->reply_frames = (MPT_FRAME_HDR *) mem;
ioc->reply_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF);
+ dinitprintk((KERN_INFO MYNAM ": %s ReplyBuffers @ %p[%p]\n",
+ ioc->name, ioc->reply_frames, (void *)(ulong)alloc_dma));
+
alloc_dma += reply_sz;
mem += reply_sz;
ioc->req_frames = (MPT_FRAME_HDR *) mem;
ioc->req_frames_dma = alloc_dma;
- dinitprintk((KERN_INFO MYNAM ": %s.RequestBuffers @ %p[%p]\n",
+ dinitprintk((KERN_INFO MYNAM ": %s RequestBuffers @ %p[%p]\n",
ioc->name, mem, (void *)(ulong)alloc_dma));
ioc->req_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF);
ioc->ChainBuffer = mem;
ioc->ChainBufferDMA = alloc_dma;
- dinitprintk((KERN_INFO MYNAM " :%s.ChainBuffers @ %p(%p)\n",
+ dinitprintk((KERN_INFO MYNAM " :%s ChainBuffers @ %p(%p)\n",
ioc->name, ioc->ChainBuffer, (void *)(ulong)ioc->ChainBufferDMA));
/* Initialize the free chain Q.
*/
static int
mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes, u32 *req,
- int replyBytes, u16 *u16reply, int maxwait, int sleepFlag)
+ int replyBytes, u16 *u16reply, int maxwait, int sleepFlag)
{
MPIDefaultReply_t *mptReply;
int failcnt = 0;
*/
if (!failcnt && (t = WaitForDoorbellReply(ioc, maxwait, sleepFlag)) < 0)
failcnt++;
-
+
dhsprintk((MYIOC_s_INFO_FMT "HandShake reply count=%d%s\n",
ioc->name, t, failcnt ? " - MISSING DOORBELL REPLY!" : ""));
int count = 0;
u32 intstat=0;
- cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * howlong;
+ cntdn = 1000 * howlong;
if (sleepFlag == CAN_SLEEP) {
while (--cntdn) {
int count = 0;
u32 intstat=0;
- cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * howlong;
+ cntdn = 1000 * howlong;
if (sleepFlag == CAN_SLEEP) {
while (--cntdn) {
intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
}
dhsprintk((MYIOC_s_INFO_FMT "WaitCnt=%d First handshake reply word=%08x%s\n",
- ioc->name, t, le32_to_cpu(*(u32 *)hs_reply),
+ ioc->name, t, le32_to_cpu(*(u32 *)hs_reply),
failcnt ? " - MISSING DOORBELL HANDSHAKE!" : ""));
/*
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
- * GetFcPortPage0 - Fetch FCPort config Page0.
+ * mptbase_GetFcPortPage0 - Fetch FCPort config Page0.
* @ioc: Pointer to MPT_ADAPTER structure
* @portnum: IOC Port number
*
* -EAGAIN if no msg frames currently available
* -EFAULT for non-successful reply or no reply (timeout)
*/
-static int
-GetFcPortPage0(MPT_ADAPTER *ioc, int portnum)
+int
+mptbase_GetFcPortPage0(MPT_ADAPTER *ioc, int portnum)
{
ConfigPageHeader_t hdr;
CONFIGPARMS cfg;
int data_sz;
int copy_sz;
int rc;
+ int count = 400;
+
/* Get FCPort Page 0 header */
hdr.PageVersion = 0;
rc = -ENOMEM;
ppage0_alloc = (FCPortPage0_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page0_dma);
if (ppage0_alloc) {
+
+ try_again:
memset((u8 *)ppage0_alloc, 0, data_sz);
cfg.physAddr = page0_dma;
cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
pp0dest->DiscoveredPortsCount = le32_to_cpu(pp0dest->DiscoveredPortsCount);
pp0dest->MaxInitiators = le32_to_cpu(pp0dest->MaxInitiators);
+ /*
+ * if still doing discovery,
+ * hang loose a while until finished
+ */
+ if (pp0dest->PortState == MPI_FCPORTPAGE0_PORTSTATE_UNKNOWN) {
+ if (count-- > 0) {
+ msleep_interruptible(100);
+ goto try_again;
+ }
+ printk(MYIOC_s_INFO_FMT "Firmware discovery not"
+ " complete.\n",
+ ioc->name);
+ }
}
pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage0_alloc, page0_dma);
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
+ * mptbase_sas_persist_operation - Perform operation on SAS Persitent Table
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @sas_address: 64bit SAS Address for operation.
+ * @target_id: specified target for operation
+ * @bus: specified bus for operation
+ * @persist_opcode: see below
+ *
+ * MPI_SAS_OP_CLEAR_NOT_PRESENT - Free all persist TargetID mappings for
+ * devices not currently present.
+ * MPI_SAS_OP_CLEAR_ALL_PERSISTENT - Clear al persist TargetID mappings
+ *
+ * NOTE: Don't use not this function during interrupt time.
+ *
+ * Returns: 0 for success, non-zero error
+ */
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+int
+mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode)
+{
+ SasIoUnitControlRequest_t *sasIoUnitCntrReq;
+ SasIoUnitControlReply_t *sasIoUnitCntrReply;
+ MPT_FRAME_HDR *mf = NULL;
+ MPIHeader_t *mpi_hdr;
+
+
+ /* insure garbage is not sent to fw */
+ switch(persist_opcode) {
+
+ case MPI_SAS_OP_CLEAR_NOT_PRESENT:
+ case MPI_SAS_OP_CLEAR_ALL_PERSISTENT:
+ break;
+
+ default:
+ return -1;
+ break;
+ }
+
+ printk("%s: persist_opcode=%x\n",__FUNCTION__, persist_opcode);
+
+ /* Get a MF for this command.
+ */
+ if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
+ printk("%s: no msg frames!\n",__FUNCTION__);
+ return -1;
+ }
+
+ mpi_hdr = (MPIHeader_t *) mf;
+ sasIoUnitCntrReq = (SasIoUnitControlRequest_t *)mf;
+ memset(sasIoUnitCntrReq,0,sizeof(SasIoUnitControlRequest_t));
+ sasIoUnitCntrReq->Function = MPI_FUNCTION_SAS_IO_UNIT_CONTROL;
+ sasIoUnitCntrReq->MsgContext = mpi_hdr->MsgContext;
+ sasIoUnitCntrReq->Operation = persist_opcode;
+
+ init_timer(&ioc->persist_timer);
+ ioc->persist_timer.data = (unsigned long) ioc;
+ ioc->persist_timer.function = mpt_timer_expired;
+ ioc->persist_timer.expires = jiffies + HZ*10 /* 10 sec */;
+ ioc->persist_wait_done=0;
+ add_timer(&ioc->persist_timer);
+ mpt_put_msg_frame(mpt_base_index, ioc, mf);
+ wait_event(mpt_waitq, ioc->persist_wait_done);
+
+ sasIoUnitCntrReply =
+ (SasIoUnitControlReply_t *)ioc->persist_reply_frame;
+ if (le16_to_cpu(sasIoUnitCntrReply->IOCStatus) != MPI_IOCSTATUS_SUCCESS) {
+ printk("%s: IOCStatus=0x%X IOCLogInfo=0x%X\n",
+ __FUNCTION__,
+ sasIoUnitCntrReply->IOCStatus,
+ sasIoUnitCntrReply->IOCLogInfo);
+ return -1;
+ }
+
+ printk("%s: success\n",__FUNCTION__);
+ return 0;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
* GetIoUnitPage2 - Retrieve BIOS version and boot order information.
* @ioc: Pointer to MPT_ADAPTER structure
*
ioc->spi_data.minSyncFactor = MPT_ASYNC;
ioc->spi_data.busType = MPT_HOST_BUS_UNKNOWN;
rc = 1;
+ ddvprintk((MYIOC_s_INFO_FMT "Unable to read PortPage0 minSyncFactor=%x\n",
+ ioc->name, ioc->spi_data.minSyncFactor));
} else {
/* Save the Port Page 0 data
*/
if ( (pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_QAS) == 0 ) {
ioc->spi_data.noQas |= MPT_TARGET_NO_NEGO_QAS;
- dinitprintk((KERN_INFO MYNAM " :%s noQas due to Capabilities=%x\n",
+ ddvprintk((KERN_INFO MYNAM " :%s noQas due to Capabilities=%x\n",
ioc->name, pPP0->Capabilities));
}
ioc->spi_data.maxBusWidth = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_WIDE ? 1 : 0;
ioc->spi_data.maxSyncOffset = (u8) (data >> 16);
data = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_MIN_SYNC_PERIOD_MASK;
ioc->spi_data.minSyncFactor = (u8) (data >> 8);
+ ddvprintk((MYIOC_s_INFO_FMT "PortPage0 minSyncFactor=%x\n",
+ ioc->name, ioc->spi_data.minSyncFactor));
} else {
ioc->spi_data.maxSyncOffset = 0;
ioc->spi_data.minSyncFactor = MPT_ASYNC;
if ((ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_HVD) ||
(ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_SE)) {
- if (ioc->spi_data.minSyncFactor < MPT_ULTRA)
+ if (ioc->spi_data.minSyncFactor < MPT_ULTRA) {
ioc->spi_data.minSyncFactor = MPT_ULTRA;
+ ddvprintk((MYIOC_s_INFO_FMT "HVD or SE detected, minSyncFactor=%x\n",
+ ioc->name, ioc->spi_data.minSyncFactor));
+ }
}
}
if (pbuf) {
SCSIPortPage2_t *pPP2 = (SCSIPortPage2_t *) pbuf;
MpiDeviceInfo_t *pdevice = NULL;
+ /*
+ * Save "Set to Avoid SCSI Bus Resets" flag
+ */
+ ioc->spi_data.bus_reset =
+ (le32_to_cpu(pPP2->PortFlags) &
+ MPI_SCSIPORTPAGE2_PORT_FLAGS_AVOID_SCSI_RESET) ?
+ 0 : 1 ;
+
/* Save the Port Page 2 data
* (reformat into a 32bit quantity)
*/
if (mpt_config(ioc, &cfg) != 0)
goto done_and_free;
- if ( (mem = (u8 *)ioc->spi_data.pIocPg2) == NULL ) {
+ if ( (mem = (u8 *)ioc->raid_data.pIocPg2) == NULL ) {
mem = kmalloc(iocpage2sz, GFP_ATOMIC);
if (mem) {
- ioc->spi_data.pIocPg2 = (IOCPage2_t *) mem;
+ ioc->raid_data.pIocPg2 = (IOCPage2_t *) mem;
} else {
goto done_and_free;
}
/* At least 1 RAID Volume
*/
pIocRv = pIoc2->RaidVolume;
- ioc->spi_data.isRaid = 0;
+ ioc->raid_data.isRaid = 0;
for (jj = 0; jj < nVols; jj++, pIocRv++) {
vid = pIocRv->VolumeID;
vbus = pIocRv->VolumeBus;
/* find the match
*/
if (vbus == 0) {
- ioc->spi_data.isRaid |= (1 << vid);
+ ioc->raid_data.isRaid |= (1 << vid);
} else {
/* Error! Always bus 0
*/
/* Free the old page
*/
- kfree(ioc->spi_data.pIocPg3);
- ioc->spi_data.pIocPg3 = NULL;
+ kfree(ioc->raid_data.pIocPg3);
+ ioc->raid_data.pIocPg3 = NULL;
/* There is at least one physical disk.
* Read and save IOC Page 3
mem = kmalloc(iocpage3sz, GFP_ATOMIC);
if (mem) {
memcpy(mem, (u8 *)pIoc3, iocpage3sz);
- ioc->spi_data.pIocPg3 = (IOCPage3_t *) mem;
+ ioc->raid_data.pIocPg3 = (IOCPage3_t *) mem;
}
}
evnp = (EventNotification_t *) mpt_get_msg_frame(mpt_base_index, ioc);
if (evnp == NULL) {
- dprintk((MYIOC_s_WARN_FMT "Unable to allocate event request frame!\n",
+ devtprintk((MYIOC_s_WARN_FMT "Unable to allocate event request frame!\n",
ioc->name));
return 0;
}
memset(evnp, 0, sizeof(*evnp));
- dprintk((MYIOC_s_INFO_FMT "Sending EventNotification(%d)\n", ioc->name, EvSwitch));
+ devtprintk((MYIOC_s_INFO_FMT "Sending EventNotification (%d) request %p\n", ioc->name, EvSwitch, evnp));
evnp->Function = MPI_FUNCTION_EVENT_NOTIFICATION;
evnp->ChainOffset = 0;
EventAck_t *pAck;
if ((pAck = (EventAck_t *) mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
- printk(MYIOC_s_WARN_FMT "Unable to allocate event ACK request frame!\n",
- ioc->name);
+ printk(MYIOC_s_WARN_FMT "Unable to allocate event ACK "
+ "request frame for Event=%x EventContext=%x EventData=%x!\n",
+ ioc->name, evnp->Event, le32_to_cpu(evnp->EventContext),
+ le32_to_cpu(evnp->Data[0]));
return -1;
}
memset(pAck, 0, sizeof(*pAck));
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-static char *
-EventDescriptionStr(u8 event, u32 evData0)
+static void
+EventDescriptionStr(u8 event, u32 evData0, char *evStr)
{
char *ds;
ds = "Events(OFF) Change";
break;
case MPI_EVENT_INTEGRATED_RAID:
- ds = "Integrated Raid";
+ {
+ u8 ReasonCode = (u8)(evData0 >> 16);
+ switch (ReasonCode) {
+ case MPI_EVENT_RAID_RC_VOLUME_CREATED :
+ ds = "Integrated Raid: Volume Created";
+ break;
+ case MPI_EVENT_RAID_RC_VOLUME_DELETED :
+ ds = "Integrated Raid: Volume Deleted";
+ break;
+ case MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED :
+ ds = "Integrated Raid: Volume Settings Changed";
+ break;
+ case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED :
+ ds = "Integrated Raid: Volume Status Changed";
+ break;
+ case MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED :
+ ds = "Integrated Raid: Volume Physdisk Changed";
+ break;
+ case MPI_EVENT_RAID_RC_PHYSDISK_CREATED :
+ ds = "Integrated Raid: Physdisk Created";
+ break;
+ case MPI_EVENT_RAID_RC_PHYSDISK_DELETED :
+ ds = "Integrated Raid: Physdisk Deleted";
+ break;
+ case MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED :
+ ds = "Integrated Raid: Physdisk Settings Changed";
+ break;
+ case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED :
+ ds = "Integrated Raid: Physdisk Status Changed";
+ break;
+ case MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED :
+ ds = "Integrated Raid: Domain Validation Needed";
+ break;
+ case MPI_EVENT_RAID_RC_SMART_DATA :
+ ds = "Integrated Raid; Smart Data";
+ break;
+ case MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED :
+ ds = "Integrated Raid: Replace Action Started";
+ break;
+ default:
+ ds = "Integrated Raid";
break;
+ }
+ break;
+ }
+ case MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE:
+ ds = "SCSI Device Status Change";
+ break;
+ case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE:
+ {
+ u8 ReasonCode = (u8)(evData0 >> 16);
+ switch (ReasonCode) {
+ case MPI_EVENT_SAS_DEV_STAT_RC_ADDED:
+ ds = "SAS Device Status Change: Added";
+ break;
+ case MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING:
+ ds = "SAS Device Status Change: Deleted";
+ break;
+ case MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA:
+ ds = "SAS Device Status Change: SMART Data";
+ break;
+ case MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED:
+ ds = "SAS Device Status Change: No Persistancy Added";
+ break;
+ default:
+ ds = "SAS Device Status Change: Unknown";
+ break;
+ }
+ break;
+ }
+ case MPI_EVENT_ON_BUS_TIMER_EXPIRED:
+ ds = "Bus Timer Expired";
+ break;
+ case MPI_EVENT_QUEUE_FULL:
+ ds = "Queue Full";
+ break;
+ case MPI_EVENT_SAS_SES:
+ ds = "SAS SES Event";
+ break;
+ case MPI_EVENT_PERSISTENT_TABLE_FULL:
+ ds = "Persistent Table Full";
+ break;
+ case MPI_EVENT_SAS_PHY_LINK_STATUS:
+ ds = "SAS PHY Link Status";
+ break;
+ case MPI_EVENT_SAS_DISCOVERY_ERROR:
+ ds = "SAS Discovery Error";
+ break;
+
/*
* MPT base "custom" events may be added here...
*/
ds = "Unknown";
break;
}
- return ds;
+ strcpy(evStr,ds);
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
int ii;
int r = 0;
int handlers = 0;
- char *evStr;
+ char evStr[100];
u8 event;
/*
evData0 = le32_to_cpu(pEventReply->Data[0]);
}
- evStr = EventDescriptionStr(event, evData0);
+ EventDescriptionStr(event, evData0, evStr);
devtprintk((MYIOC_s_INFO_FMT "MPT event (%s=%02Xh) detected!\n",
ioc->name,
evStr,
* Do general / base driver event processing
*/
switch(event) {
- case MPI_EVENT_NONE: /* 00 */
- case MPI_EVENT_LOG_DATA: /* 01 */
- case MPI_EVENT_STATE_CHANGE: /* 02 */
- case MPI_EVENT_UNIT_ATTENTION: /* 03 */
- case MPI_EVENT_IOC_BUS_RESET: /* 04 */
- case MPI_EVENT_EXT_BUS_RESET: /* 05 */
- case MPI_EVENT_RESCAN: /* 06 */
- case MPI_EVENT_LINK_STATUS_CHANGE: /* 07 */
- case MPI_EVENT_LOOP_STATE_CHANGE: /* 08 */
- case MPI_EVENT_LOGOUT: /* 09 */
- case MPI_EVENT_INTEGRATED_RAID: /* 0B */
- case MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE: /* 0C */
- default:
- break;
case MPI_EVENT_EVENT_CHANGE: /* 0A */
if (evDataLen) {
u8 evState = evData0 & 0xFF;
}
}
break;
+ default:
+ break;
}
/*
* If needed, send (a single) EventAck.
*/
if (pEventReply->AckRequired == MPI_EVENT_NOTIFICATION_ACK_REQUIRED) {
+ devtprintk((MYIOC_s_WARN_FMT
+ "EventAck required\n",ioc->name));
if ((ii = SendEventAck(ioc, pEventReply)) != 0) {
devtprintk((MYIOC_s_WARN_FMT "SendEventAck returned %d\n",
ioc->name, ii));
case 0x00080000:
desc = "Outbound DMA Overrun";
break;
-
+
case 0x00090000:
desc = "Task Management";
break;
case 0x000C0000:
desc = "Untagged Table Size";
break;
-
+
}
printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): F/W: %s\n", ioc->name, log_info, desc);
}
+/* strings for sas loginfo */
+ static char *originator_str[] = {
+ "IOP", /* 00h */
+ "PL", /* 01h */
+ "IR" /* 02h */
+ };
+ static char *iop_code_str[] = {
+ NULL, /* 00h */
+ "Invalid SAS Address", /* 01h */
+ NULL, /* 02h */
+ "Invalid Page", /* 03h */
+ NULL, /* 04h */
+ "Task Terminated" /* 05h */
+ };
+ static char *pl_code_str[] = {
+ NULL, /* 00h */
+ "Open Failure", /* 01h */
+ "Invalid Scatter Gather List", /* 02h */
+ "Wrong Relative Offset or Frame Length", /* 03h */
+ "Frame Transfer Error", /* 04h */
+ "Transmit Frame Connected Low", /* 05h */
+ "SATA Non-NCQ RW Error Bit Set", /* 06h */
+ "SATA Read Log Receive Data Error", /* 07h */
+ "SATA NCQ Fail All Commands After Error", /* 08h */
+ "SATA Error in Receive Set Device Bit FIS", /* 09h */
+ "Receive Frame Invalid Message", /* 0Ah */
+ "Receive Context Message Valid Error", /* 0Bh */
+ "Receive Frame Current Frame Error", /* 0Ch */
+ "SATA Link Down", /* 0Dh */
+ "Discovery SATA Init W IOS", /* 0Eh */
+ "Config Invalid Page", /* 0Fh */
+ "Discovery SATA Init Timeout", /* 10h */
+ "Reset", /* 11h */
+ "Abort", /* 12h */
+ "IO Not Yet Executed", /* 13h */
+ "IO Executed", /* 14h */
+ NULL, /* 15h */
+ NULL, /* 16h */
+ NULL, /* 17h */
+ NULL, /* 18h */
+ NULL, /* 19h */
+ NULL, /* 1Ah */
+ NULL, /* 1Bh */
+ NULL, /* 1Ch */
+ NULL, /* 1Dh */
+ NULL, /* 1Eh */
+ NULL, /* 1Fh */
+ "Enclosure Management" /* 20h */
+ };
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * mpt_sas_log_info - Log information returned from SAS IOC.
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @log_info: U32 LogInfo reply word from the IOC
+ *
+ * Refer to lsi/mpi_log_sas.h.
+ */
+static void
+mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info)
+{
+union loginfo_type {
+ u32 loginfo;
+ struct {
+ u32 subcode:16;
+ u32 code:8;
+ u32 originator:4;
+ u32 bus_type:4;
+ }dw;
+};
+ union loginfo_type sas_loginfo;
+ char *code_desc = NULL;
+
+ sas_loginfo.loginfo = log_info;
+ if ((sas_loginfo.dw.bus_type != 3 /*SAS*/) &&
+ (sas_loginfo.dw.originator < sizeof(originator_str)/sizeof(char*)))
+ return;
+ if ((sas_loginfo.dw.originator == 0 /*IOP*/) &&
+ (sas_loginfo.dw.code < sizeof(iop_code_str)/sizeof(char*))) {
+ code_desc = iop_code_str[sas_loginfo.dw.code];
+ }else if ((sas_loginfo.dw.originator == 1 /*PL*/) &&
+ (sas_loginfo.dw.code < sizeof(pl_code_str)/sizeof(char*) )) {
+ code_desc = pl_code_str[sas_loginfo.dw.code];
+ }
+
+ if (code_desc != NULL)
+ printk(MYIOC_s_INFO_FMT
+ "LogInfo(0x%08x): Originator={%s}, Code={%s},"
+ " SubCode(0x%04x)\n",
+ ioc->name,
+ log_info,
+ originator_str[sas_loginfo.dw.originator],
+ code_desc,
+ sas_loginfo.dw.subcode);
+ else
+ printk(MYIOC_s_INFO_FMT
+ "LogInfo(0x%08x): Originator={%s}, Code=(0x%02x),"
+ " SubCode(0x%04x)\n",
+ ioc->name,
+ log_info,
+ originator_str[sas_loginfo.dw.originator],
+ sas_loginfo.dw.code,
+ sas_loginfo.dw.subcode);
+}
+
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* mpt_sp_ioc_info - IOC information returned from SCSI Parallel IOC.
break;
case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */
- /* This error is checked in scsi_io_done(). Skip.
+ /* This error is checked in scsi_io_done(). Skip.
desc = "SCSI Data Underrun";
*/
break;
EXPORT_SYMBOL(mpt_read_ioc_pg_3);
EXPORT_SYMBOL(mpt_alloc_fw_memory);
EXPORT_SYMBOL(mpt_free_fw_memory);
+EXPORT_SYMBOL(mptbase_sas_persist_operation);
+EXPORT_SYMBOL(mpt_alt_ioc_wait);
+EXPORT_SYMBOL(mptbase_GetFcPortPage0);
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff