module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "Turn on/off module debugging (default:off).");
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
#define dprintk(fmt, arg...) do { if (debug) \
printk(KERN_DEBUG "%s/dvb: " fmt, dev->name , ## arg); } while(0)
return 0;
}
+static int mt352_avermedia_xc3028_init(struct dvb_frontend *fe)
+{
+ static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x2d };
+ static u8 reset [] = { RESET, 0x80 };
+ static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 };
+ static u8 agc_cfg [] = { AGC_TARGET, 0xe };
+ static u8 capt_range_cfg[] = { CAPT_RANGE, 0x33 };
+
+ mt352_write(fe, clock_config, sizeof(clock_config));
+ udelay(200);
+ mt352_write(fe, reset, sizeof(reset));
+ mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg));
+ mt352_write(fe, agc_cfg, sizeof(agc_cfg));
+ mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
+ return 0;
+}
+
static int mt352_pinnacle_tuner_set_params(struct dvb_frontend* fe,
struct dvb_frontend_parameters* params)
{
.demod_init = mt352_aver777_init,
};
-static struct mt352_config avermedia_e506r_mt352_dev = {
+static struct mt352_config avermedia_xc3028_mt352_dev = {
.demod_address = (0x1e >> 1),
.no_tuner = 1,
+ .demod_init = mt352_avermedia_xc3028_init,
};
/* ==================================================================
return 0;
}
-static void configure_tda827x_fe(struct saa7134_dev *dev, struct tda1004x_config *cdec_conf,
- struct tda827x_config *tuner_conf)
+static int configure_tda827x_fe(struct saa7134_dev *dev,
+ struct tda1004x_config *cdec_conf,
+ struct tda827x_config *tuner_conf)
{
- dev->dvb.frontend = dvb_attach(tda10046_attach, cdec_conf, &dev->i2c_adap);
- if (dev->dvb.frontend) {
+ struct videobuf_dvb_frontend *fe0;
+
+ /* Get the first frontend */
+ fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1);
+
+ fe0->dvb.frontend = dvb_attach(tda10046_attach, cdec_conf, &dev->i2c_adap);
+ if (fe0->dvb.frontend) {
if (cdec_conf->i2c_gate)
- dev->dvb.frontend->ops.i2c_gate_ctrl = tda8290_i2c_gate_ctrl;
- if (dvb_attach(tda827x_attach, dev->dvb.frontend, cdec_conf->tuner_address,
- &dev->i2c_adap, tuner_conf) == NULL) {
- wprintk("no tda827x tuner found at addr: %02x\n",
+ fe0->dvb.frontend->ops.i2c_gate_ctrl = tda8290_i2c_gate_ctrl;
+ if (dvb_attach(tda827x_attach, fe0->dvb.frontend,
+ cdec_conf->tuner_address,
+ &dev->i2c_adap, tuner_conf))
+ return 0;
+
+ wprintk("no tda827x tuner found at addr: %02x\n",
cdec_conf->tuner_address);
- }
}
+ return -EINVAL;
}
/* ------------------------------------------------------------------ */
static struct tda827x_config tda827x_cfg_0 = {
- .tuner_callback = saa7134_tuner_callback,
.init = philips_tda827x_tuner_init,
.sleep = philips_tda827x_tuner_sleep,
.config = 0,
};
static struct tda827x_config tda827x_cfg_1 = {
- .tuner_callback = saa7134_tuner_callback,
.init = philips_tda827x_tuner_init,
.sleep = philips_tda827x_tuner_sleep,
.config = 1,
};
static struct tda827x_config tda827x_cfg_2 = {
- .tuner_callback = saa7134_tuner_callback,
.init = philips_tda827x_tuner_init,
.sleep = philips_tda827x_tuner_sleep,
.config = 2,
};
static struct tda827x_config tda827x_cfg_2_sw42 = {
- .tuner_callback = saa7134_tuner_callback,
.init = philips_tda827x_tuner_init,
.sleep = philips_tda827x_tuner_sleep,
.config = 2,
.request_firmware = philips_tda1004x_request_firmware
};
+static struct tda1004x_config asus_tiger_3in1_config = {
+ .demod_address = 0x0b,
+ .invert = 1,
+ .invert_oclk = 0,
+ .xtal_freq = TDA10046_XTAL_16M,
+ .agc_config = TDA10046_AGC_TDA827X,
+ .gpio_config = TDA10046_GP11_I,
+ .if_freq = TDA10046_FREQ_045,
+ .i2c_gate = 0x4b,
+ .tuner_address = 0x61,
+ .antenna_switch = 1,
+ .request_firmware = philips_tda1004x_request_firmware
+};
+
/* ------------------------------------------------------------------
* special case: this card uses saa713x GPIO22 for the mode switch
*/
}
static struct tda827x_config ads_duo_cfg = {
- .tuner_callback = saa7134_tuner_callback,
.init = ads_duo_tuner_init,
.sleep = ads_duo_tuner_sleep,
.config = 0
.demod_address = 0x0e,
.invert = 0,
.diseqc_tone = 0,
+ .xtal_freq = TDA10086_XTAL_16M,
+};
+
+static struct tda10086_config sd1878_4m = {
+ .demod_address = 0x0e,
+ .invert = 0,
+ .diseqc_tone = 0,
+ .xtal_freq = TDA10086_XTAL_4M,
};
/* ------------------------------------------------------------------
{
int ret;
int attach_xc3028 = 0;
+ struct videobuf_dvb_frontend *fe0;
+
+ /* FIXME: add support for multi-frontend */
+ mutex_init(&dev->frontends.lock);
+ INIT_LIST_HEAD(&dev->frontends.frontend.felist);
+ dev->frontends.active_fe_id = 0;
+
+ printk(KERN_INFO "%s() allocating 1 frontend\n", __func__);
+
+ if (videobuf_dvb_alloc_frontend(dev, &dev->frontends, 1) == NULL) {
+ printk(KERN_ERR "%s() failed to alloc\n", __func__);
+ return -ENOMEM;
+ }
+
+ /* Get the first frontend */
+ fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1);
+ if (!fe0)
+ return -EINVAL;
/* init struct videobuf_dvb */
dev->ts.nr_bufs = 32;
dev->ts.nr_packets = 32*4;
- dev->dvb.name = dev->name;
- videobuf_queue_sg_init(&dev->dvb.dvbq, &saa7134_ts_qops,
+ fe0->dvb.name = dev->name;
+ videobuf_queue_sg_init(&fe0->dvb.dvbq, &saa7134_ts_qops,
&dev->pci->dev, &dev->slock,
V4L2_BUF_TYPE_VIDEO_CAPTURE,
V4L2_FIELD_ALTERNATE,
switch (dev->board) {
case SAA7134_BOARD_PINNACLE_300I_DVBT_PAL:
dprintk("pinnacle 300i dvb setup\n");
- dev->dvb.frontend = dvb_attach(mt352_attach, &pinnacle_300i,
+ fe0->dvb.frontend = dvb_attach(mt352_attach, &pinnacle_300i,
&dev->i2c_adap);
- if (dev->dvb.frontend) {
- dev->dvb.frontend->ops.tuner_ops.set_params = mt352_pinnacle_tuner_set_params;
+ if (fe0->dvb.frontend) {
+ fe0->dvb.frontend->ops.tuner_ops.set_params = mt352_pinnacle_tuner_set_params;
}
break;
case SAA7134_BOARD_AVERMEDIA_777:
case SAA7134_BOARD_AVERMEDIA_A16AR:
dprintk("avertv 777 dvb setup\n");
- dev->dvb.frontend = dvb_attach(mt352_attach, &avermedia_777,
+ fe0->dvb.frontend = dvb_attach(mt352_attach, &avermedia_777,
&dev->i2c_adap);
- if (dev->dvb.frontend) {
- dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
- NULL, DVB_PLL_PHILIPS_TD1316);
+ if (fe0->dvb.frontend) {
+ dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
+ &dev->i2c_adap, 0x61,
+ TUNER_PHILIPS_TD1316);
}
break;
+ case SAA7134_BOARD_AVERMEDIA_A16D:
+ dprintk("AverMedia A16D dvb setup\n");
+ fe0->dvb.frontend = dvb_attach(mt352_attach,
+ &avermedia_xc3028_mt352_dev,
+ &dev->i2c_adap);
+ attach_xc3028 = 1;
+ break;
case SAA7134_BOARD_MD7134:
- dev->dvb.frontend = dvb_attach(tda10046_attach,
+ fe0->dvb.frontend = dvb_attach(tda10046_attach,
&medion_cardbus,
&dev->i2c_adap);
- if (dev->dvb.frontend) {
- dvb_attach(simple_tuner_attach, dev->dvb.frontend,
+ if (fe0->dvb.frontend) {
+ dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
&dev->i2c_adap, medion_cardbus.tuner_address,
TUNER_PHILIPS_FMD1216ME_MK3);
}
break;
case SAA7134_BOARD_PHILIPS_TOUGH:
- dev->dvb.frontend = dvb_attach(tda10046_attach,
+ fe0->dvb.frontend = dvb_attach(tda10046_attach,
&philips_tu1216_60_config,
&dev->i2c_adap);
- if (dev->dvb.frontend) {
- dev->dvb.frontend->ops.tuner_ops.init = philips_tu1216_init;
- dev->dvb.frontend->ops.tuner_ops.set_params = philips_tda6651_pll_set;
+ if (fe0->dvb.frontend) {
+ fe0->dvb.frontend->ops.tuner_ops.init = philips_tu1216_init;
+ fe0->dvb.frontend->ops.tuner_ops.set_params = philips_tda6651_pll_set;
}
break;
case SAA7134_BOARD_FLYDVBTDUO:
case SAA7134_BOARD_FLYDVBT_DUO_CARDBUS:
- configure_tda827x_fe(dev, &tda827x_lifeview_config, &tda827x_cfg_0);
+ if (configure_tda827x_fe(dev, &tda827x_lifeview_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_PHILIPS_EUROPA:
case SAA7134_BOARD_VIDEOMATE_DVBT_300:
- dev->dvb.frontend = dvb_attach(tda10046_attach,
+ fe0->dvb.frontend = dvb_attach(tda10046_attach,
&philips_europa_config,
&dev->i2c_adap);
- if (dev->dvb.frontend) {
- dev->original_demod_sleep = dev->dvb.frontend->ops.sleep;
- dev->dvb.frontend->ops.sleep = philips_europa_demod_sleep;
- dev->dvb.frontend->ops.tuner_ops.init = philips_europa_tuner_init;
- dev->dvb.frontend->ops.tuner_ops.sleep = philips_europa_tuner_sleep;
- dev->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params;
+ if (fe0->dvb.frontend) {
+ dev->original_demod_sleep = fe0->dvb.frontend->ops.sleep;
+ fe0->dvb.frontend->ops.sleep = philips_europa_demod_sleep;
+ fe0->dvb.frontend->ops.tuner_ops.init = philips_europa_tuner_init;
+ fe0->dvb.frontend->ops.tuner_ops.sleep = philips_europa_tuner_sleep;
+ fe0->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params;
}
break;
case SAA7134_BOARD_VIDEOMATE_DVBT_200:
- dev->dvb.frontend = dvb_attach(tda10046_attach,
+ fe0->dvb.frontend = dvb_attach(tda10046_attach,
&philips_tu1216_61_config,
&dev->i2c_adap);
- if (dev->dvb.frontend) {
- dev->dvb.frontend->ops.tuner_ops.init = philips_tu1216_init;
- dev->dvb.frontend->ops.tuner_ops.set_params = philips_tda6651_pll_set;
+ if (fe0->dvb.frontend) {
+ fe0->dvb.frontend->ops.tuner_ops.init = philips_tu1216_init;
+ fe0->dvb.frontend->ops.tuner_ops.set_params = philips_tda6651_pll_set;
}
break;
case SAA7134_BOARD_KWORLD_DVBT_210:
- configure_tda827x_fe(dev, &kworld_dvb_t_210_config, &tda827x_cfg_2);
+ if (configure_tda827x_fe(dev, &kworld_dvb_t_210_config,
+ &tda827x_cfg_2) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_PHILIPS_TIGER:
- configure_tda827x_fe(dev, &philips_tiger_config, &tda827x_cfg_0);
+ if (configure_tda827x_fe(dev, &philips_tiger_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_PINNACLE_PCTV_310i:
- configure_tda827x_fe(dev, &pinnacle_pctv_310i_config, &tda827x_cfg_1);
+ if (configure_tda827x_fe(dev, &pinnacle_pctv_310i_config,
+ &tda827x_cfg_1) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_HAUPPAUGE_HVR1110:
- configure_tda827x_fe(dev, &hauppauge_hvr_1110_config, &tda827x_cfg_1);
+ if (configure_tda827x_fe(dev, &hauppauge_hvr_1110_config,
+ &tda827x_cfg_1) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_ASUSTeK_P7131_DUAL:
- configure_tda827x_fe(dev, &asus_p7131_dual_config, &tda827x_cfg_0);
+ if (configure_tda827x_fe(dev, &asus_p7131_dual_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_FLYDVBT_LR301:
- configure_tda827x_fe(dev, &tda827x_lifeview_config, &tda827x_cfg_0);
+ if (configure_tda827x_fe(dev, &tda827x_lifeview_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_FLYDVB_TRIO:
- if(! use_frontend) { /* terrestrial */
- configure_tda827x_fe(dev, &lifeview_trio_config, &tda827x_cfg_0);
+ if (!use_frontend) { /* terrestrial */
+ if (configure_tda827x_fe(dev, &lifeview_trio_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
} else { /* satellite */
- dev->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, &dev->i2c_adap);
- if (dev->dvb.frontend) {
- if (dvb_attach(tda826x_attach, dev->dvb.frontend, 0x63,
+ fe0->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, &dev->i2c_adap);
+ if (fe0->dvb.frontend) {
+ if (dvb_attach(tda826x_attach, fe0->dvb.frontend, 0x63,
&dev->i2c_adap, 0) == NULL) {
wprintk("%s: Lifeview Trio, No tda826x found!\n", __func__);
+ goto dettach_frontend;
}
- if (dvb_attach(isl6421_attach, dev->dvb.frontend, &dev->i2c_adap,
+ if (dvb_attach(isl6421_attach, fe0->dvb.frontend, &dev->i2c_adap,
0x08, 0, 0) == NULL) {
wprintk("%s: Lifeview Trio, No ISL6421 found!\n", __func__);
+ goto dettach_frontend;
}
}
}
break;
case SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331:
case SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS:
- dev->dvb.frontend = dvb_attach(tda10046_attach,
+ fe0->dvb.frontend = dvb_attach(tda10046_attach,
&ads_tech_duo_config,
&dev->i2c_adap);
- if (dev->dvb.frontend) {
- if (dvb_attach(tda827x_attach,dev->dvb.frontend,
+ if (fe0->dvb.frontend) {
+ if (dvb_attach(tda827x_attach,fe0->dvb.frontend,
ads_tech_duo_config.tuner_address, &dev->i2c_adap,
&ads_duo_cfg) == NULL) {
wprintk("no tda827x tuner found at addr: %02x\n",
ads_tech_duo_config.tuner_address);
+ goto dettach_frontend;
}
- }
+ } else
+ wprintk("failed to attach tda10046\n");
break;
case SAA7134_BOARD_TEVION_DVBT_220RF:
- configure_tda827x_fe(dev, &tevion_dvbt220rf_config, &tda827x_cfg_0);
+ if (configure_tda827x_fe(dev, &tevion_dvbt220rf_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_MEDION_MD8800_QUADRO:
if (!use_frontend) { /* terrestrial */
- configure_tda827x_fe(dev, &md8800_dvbt_config, &tda827x_cfg_0);
+ if (configure_tda827x_fe(dev, &md8800_dvbt_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
} else { /* satellite */
- dev->dvb.frontend = dvb_attach(tda10086_attach,
+ fe0->dvb.frontend = dvb_attach(tda10086_attach,
&flydvbs, &dev->i2c_adap);
- if (dev->dvb.frontend) {
- struct dvb_frontend *fe = dev->dvb.frontend;
+ if (fe0->dvb.frontend) {
+ struct dvb_frontend *fe = fe0->dvb.frontend;
u8 dev_id = dev->eedata[2];
u8 data = 0xc4;
struct i2c_msg msg = {.addr = 0x08, .flags = 0, .len = 1};
- if (dvb_attach(tda826x_attach, dev->dvb.frontend,
- 0x60, &dev->i2c_adap, 0) == NULL)
+ if (dvb_attach(tda826x_attach, fe0->dvb.frontend,
+ 0x60, &dev->i2c_adap, 0) == NULL) {
wprintk("%s: Medion Quadro, no tda826x "
"found !\n", __func__);
+ goto dettach_frontend;
+ }
if (dev_id != 0x08) {
/* we need to open the i2c gate (we know it exists) */
fe->ops.i2c_gate_ctrl(fe, 1);
if (dvb_attach(isl6405_attach, fe,
- &dev->i2c_adap, 0x08, 0, 0) == NULL)
+ &dev->i2c_adap, 0x08, 0, 0) == NULL) {
wprintk("%s: Medion Quadro, no ISL6405 "
"found !\n", __func__);
+ goto dettach_frontend;
+ }
if (dev_id == 0x07) {
/* fire up the 2nd section of the LNB supply since
we can't do this from the other section */
}
break;
case SAA7134_BOARD_AVERMEDIA_AVERTVHD_A180:
- dev->dvb.frontend = dvb_attach(nxt200x_attach, &avertvhda180,
+ fe0->dvb.frontend = dvb_attach(nxt200x_attach, &avertvhda180,
&dev->i2c_adap);
- if (dev->dvb.frontend) {
- dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
+ if (fe0->dvb.frontend)
+ dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x61,
NULL, DVB_PLL_TDHU2);
- }
break;
+ case SAA7134_BOARD_ADS_INSTANT_HDTV_PCI:
case SAA7134_BOARD_KWORLD_ATSC110:
- dev->dvb.frontend = dvb_attach(nxt200x_attach, &kworldatsc110,
+ fe0->dvb.frontend = dvb_attach(nxt200x_attach, &kworldatsc110,
&dev->i2c_adap);
- if (dev->dvb.frontend) {
- dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
- NULL, DVB_PLL_TUV1236D);
- }
+ if (fe0->dvb.frontend)
+ dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
+ &dev->i2c_adap, 0x61,
+ TUNER_PHILIPS_TUV1236D);
break;
case SAA7134_BOARD_FLYDVBS_LR300:
- dev->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs,
+ fe0->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs,
&dev->i2c_adap);
- if (dev->dvb.frontend) {
- if (dvb_attach(tda826x_attach, dev->dvb.frontend, 0x60,
+ if (fe0->dvb.frontend) {
+ if (dvb_attach(tda826x_attach, fe0->dvb.frontend, 0x60,
&dev->i2c_adap, 0) == NULL) {
wprintk("%s: No tda826x found!\n", __func__);
+ goto dettach_frontend;
}
- if (dvb_attach(isl6421_attach, dev->dvb.frontend,
+ if (dvb_attach(isl6421_attach, fe0->dvb.frontend,
&dev->i2c_adap, 0x08, 0, 0) == NULL) {
wprintk("%s: No ISL6421 found!\n", __func__);
+ goto dettach_frontend;
}
}
break;
case SAA7134_BOARD_ASUS_EUROPA2_HYBRID:
- dev->dvb.frontend = dvb_attach(tda10046_attach,
+ fe0->dvb.frontend = dvb_attach(tda10046_attach,
&medion_cardbus,
&dev->i2c_adap);
- if (dev->dvb.frontend) {
- dev->original_demod_sleep = dev->dvb.frontend->ops.sleep;
- dev->dvb.frontend->ops.sleep = philips_europa_demod_sleep;
+ if (fe0->dvb.frontend) {
+ dev->original_demod_sleep = fe0->dvb.frontend->ops.sleep;
+ fe0->dvb.frontend->ops.sleep = philips_europa_demod_sleep;
- dvb_attach(simple_tuner_attach, dev->dvb.frontend,
+ dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
&dev->i2c_adap, medion_cardbus.tuner_address,
TUNER_PHILIPS_FMD1216ME_MK3);
}
break;
case SAA7134_BOARD_VIDEOMATE_DVBT_200A:
- dev->dvb.frontend = dvb_attach(tda10046_attach,
+ fe0->dvb.frontend = dvb_attach(tda10046_attach,
&philips_europa_config,
&dev->i2c_adap);
- if (dev->dvb.frontend) {
- dev->dvb.frontend->ops.tuner_ops.init = philips_td1316_tuner_init;
- dev->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params;
+ if (fe0->dvb.frontend) {
+ fe0->dvb.frontend->ops.tuner_ops.init = philips_td1316_tuner_init;
+ fe0->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params;
}
break;
case SAA7134_BOARD_CINERGY_HT_PCMCIA:
- configure_tda827x_fe(dev, &cinergy_ht_config, &tda827x_cfg_0);
+ if (configure_tda827x_fe(dev, &cinergy_ht_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_CINERGY_HT_PCI:
- configure_tda827x_fe(dev, &cinergy_ht_pci_config, &tda827x_cfg_0);
+ if (configure_tda827x_fe(dev, &cinergy_ht_pci_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_PHILIPS_TIGER_S:
- configure_tda827x_fe(dev, &philips_tiger_s_config, &tda827x_cfg_2);
+ if (configure_tda827x_fe(dev, &philips_tiger_s_config,
+ &tda827x_cfg_2) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_ASUS_P7131_4871:
- configure_tda827x_fe(dev, &asus_p7131_4871_config, &tda827x_cfg_2);
+ if (configure_tda827x_fe(dev, &asus_p7131_4871_config,
+ &tda827x_cfg_2) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_ASUSTeK_P7131_HYBRID_LNA:
- configure_tda827x_fe(dev, &asus_p7131_hybrid_lna_config, &tda827x_cfg_2);
+ if (configure_tda827x_fe(dev, &asus_p7131_hybrid_lna_config,
+ &tda827x_cfg_2) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_AVERMEDIA_SUPER_007:
- configure_tda827x_fe(dev, &avermedia_super_007_config, &tda827x_cfg_0);
+ if (configure_tda827x_fe(dev, &avermedia_super_007_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_TWINHAN_DTV_DVB_3056:
- configure_tda827x_fe(dev, &twinhan_dtv_dvb_3056_config, &tda827x_cfg_2_sw42);
+ if (configure_tda827x_fe(dev, &twinhan_dtv_dvb_3056_config,
+ &tda827x_cfg_2_sw42) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_PHILIPS_SNAKE:
- dev->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs,
+ fe0->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs,
&dev->i2c_adap);
- if (dev->dvb.frontend) {
- if (dvb_attach(tda826x_attach, dev->dvb.frontend, 0x60,
- &dev->i2c_adap, 0) == NULL)
+ if (fe0->dvb.frontend) {
+ if (dvb_attach(tda826x_attach, fe0->dvb.frontend, 0x60,
+ &dev->i2c_adap, 0) == NULL) {
wprintk("%s: No tda826x found!\n", __func__);
- if (dvb_attach(lnbp21_attach, dev->dvb.frontend,
- &dev->i2c_adap, 0, 0) == NULL)
+ goto dettach_frontend;
+ }
+ if (dvb_attach(lnbp21_attach, fe0->dvb.frontend,
+ &dev->i2c_adap, 0, 0) == NULL) {
wprintk("%s: No lnbp21 found!\n", __func__);
+ goto dettach_frontend;
+ }
}
break;
case SAA7134_BOARD_CREATIX_CTX953:
- configure_tda827x_fe(dev, &md8800_dvbt_config, &tda827x_cfg_0);
+ if (configure_tda827x_fe(dev, &md8800_dvbt_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_MSI_TVANYWHERE_AD11:
- configure_tda827x_fe(dev, &philips_tiger_s_config, &tda827x_cfg_2);
+ if (configure_tda827x_fe(dev, &philips_tiger_s_config,
+ &tda827x_cfg_2) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_AVERMEDIA_CARDBUS_506:
- dev->dvb.frontend = dvb_attach(mt352_attach,
- &avermedia_e506r_mt352_dev,
- &dev->i2c_adap);
+ dprintk("AverMedia E506R dvb setup\n");
+ saa7134_set_gpio(dev, 25, 0);
+ msleep(10);
+ saa7134_set_gpio(dev, 25, 1);
+ fe0->dvb.frontend = dvb_attach(mt352_attach,
+ &avermedia_xc3028_mt352_dev,
+ &dev->i2c_adap);
attach_xc3028 = 1;
break;
case SAA7134_BOARD_MD7134_BRIDGE_2:
- dev->dvb.frontend = dvb_attach(tda10086_attach,
- &flydvbs, &dev->i2c_adap);
- if (dev->dvb.frontend) {
+ fe0->dvb.frontend = dvb_attach(tda10086_attach,
+ &sd1878_4m, &dev->i2c_adap);
+ if (fe0->dvb.frontend) {
struct dvb_frontend *fe;
- if (dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x60,
- &dev->i2c_adap, DVB_PLL_PHILIPS_SD1878_TDA8261) == NULL)
+ if (dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x60,
+ &dev->i2c_adap, DVB_PLL_PHILIPS_SD1878_TDA8261) == NULL) {
wprintk("%s: MD7134 DVB-S, no SD1878 "
"found !\n", __func__);
+ goto dettach_frontend;
+ }
/* we need to open the i2c gate (we know it exists) */
- fe = dev->dvb.frontend;
+ fe = fe0->dvb.frontend;
fe->ops.i2c_gate_ctrl(fe, 1);
if (dvb_attach(isl6405_attach, fe,
- &dev->i2c_adap, 0x08, 0, 0) == NULL)
+ &dev->i2c_adap, 0x08, 0, 0) == NULL) {
wprintk("%s: MD7134 DVB-S, no ISL6405 "
"found !\n", __func__);
+ goto dettach_frontend;
+ }
fe->ops.i2c_gate_ctrl(fe, 0);
dev->original_set_voltage = fe->ops.set_voltage;
fe->ops.set_voltage = md8800_set_voltage;
fe->ops.enable_high_lnb_voltage = md8800_set_high_voltage;
}
break;
+ case SAA7134_BOARD_AVERMEDIA_M103:
+ saa7134_set_gpio(dev, 25, 0);
+ msleep(10);
+ saa7134_set_gpio(dev, 25, 1);
+ fe0->dvb.frontend = dvb_attach(mt352_attach,
+ &avermedia_xc3028_mt352_dev,
+ &dev->i2c_adap);
+ attach_xc3028 = 1;
+ break;
+ case SAA7134_BOARD_ASUSTeK_TIGER_3IN1:
+ if (!use_frontend) { /* terrestrial */
+ if (configure_tda827x_fe(dev, &asus_tiger_3in1_config,
+ &tda827x_cfg_2) < 0)
+ goto dettach_frontend;
+ } else { /* satellite */
+ fe0->dvb.frontend = dvb_attach(tda10086_attach,
+ &flydvbs, &dev->i2c_adap);
+ if (fe0->dvb.frontend) {
+ if (dvb_attach(tda826x_attach,
+ fe0->dvb.frontend, 0x60,
+ &dev->i2c_adap, 0) == NULL) {
+ wprintk("%s: Asus Tiger 3in1, no "
+ "tda826x found!\n", __func__);
+ goto dettach_frontend;
+ }
+ if (dvb_attach(lnbp21_attach, fe0->dvb.frontend,
+ &dev->i2c_adap, 0, 0) == NULL) {
+ wprintk("%s: Asus Tiger 3in1, no lnbp21"
+ " found!\n", __func__);
+ goto dettach_frontend;
+ }
+ }
+ }
+ break;
+ case SAA7134_BOARD_ASUSTeK_TIGER:
+ if (configure_tda827x_fe(dev, &philips_tiger_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
+ break;
default:
wprintk("Huh? unknown DVB card?\n");
break;
.i2c_adap = &dev->i2c_adap,
.i2c_addr = 0x61,
};
- fe = dvb_attach(xc2028_attach, dev->dvb.frontend, &cfg);
+
+ if (!fe0->dvb.frontend)
+ return -1;
+
+ fe = dvb_attach(xc2028_attach, fe0->dvb.frontend, &cfg);
if (!fe) {
printk(KERN_ERR "%s/2: xc3028 attach failed\n",
dev->name);
- dvb_frontend_detach(dev->dvb.frontend);
- dvb_unregister_frontend(dev->dvb.frontend);
- dev->dvb.frontend = NULL;
- return -1;
+ goto dettach_frontend;
}
}
- if (NULL == dev->dvb.frontend) {
+ if (NULL == fe0->dvb.frontend) {
printk(KERN_ERR "%s/dvb: frontend initialization failed\n", dev->name);
return -1;
}
+ /* define general-purpose callback pointer */
+ fe0->dvb.frontend->callback = saa7134_tuner_callback;
/* register everything else */
- ret = videobuf_dvb_register(&dev->dvb, THIS_MODULE, dev, &dev->pci->dev);
+ ret = videobuf_dvb_register_bus(&dev->frontends, THIS_MODULE, dev,
+ &dev->pci->dev, adapter_nr, 0);
/* this sequence is necessary to make the tda1004x load its firmware
* and to enter analog mode of hybrid boards
*/
if (!ret) {
- if (dev->dvb.frontend->ops.init)
- dev->dvb.frontend->ops.init(dev->dvb.frontend);
- if (dev->dvb.frontend->ops.sleep)
- dev->dvb.frontend->ops.sleep(dev->dvb.frontend);
- if (dev->dvb.frontend->ops.tuner_ops.sleep)
- dev->dvb.frontend->ops.tuner_ops.sleep(dev->dvb.frontend);
+ if (fe0->dvb.frontend->ops.init)
+ fe0->dvb.frontend->ops.init(fe0->dvb.frontend);
+ if (fe0->dvb.frontend->ops.sleep)
+ fe0->dvb.frontend->ops.sleep(fe0->dvb.frontend);
+ if (fe0->dvb.frontend->ops.tuner_ops.sleep)
+ fe0->dvb.frontend->ops.tuner_ops.sleep(fe0->dvb.frontend);
}
return ret;
+
+dettach_frontend:
+ if (fe0->dvb.frontend)
+ dvb_frontend_detach(fe0->dvb.frontend);
+ fe0->dvb.frontend = NULL;
+
+ return -1;
}
static int dvb_fini(struct saa7134_dev *dev)
{
+ struct videobuf_dvb_frontend *fe0;
+
+ /* Get the first frontend */
+ fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1);
+ if (!fe0)
+ return -EINVAL;
+
/* FIXME: I suspect that this code is bogus, since the entry for
Pinnacle 300I DVB-T PAL already defines the proper init to allow
the detection of mt2032 (TDA9887_PORT2_INACTIVE)
u8 data = 0x80;
struct i2c_msg msg = {.addr = 0x08, .buf = &data, .flags = 0, .len = 1};
struct dvb_frontend *fe;
- fe = dev->dvb.frontend;
+ fe = fe0->dvb.frontend;
if (fe->ops.i2c_gate_ctrl) {
fe->ops.i2c_gate_ctrl(fe, 1);
i2c_transfer(&dev->i2c_adap, &msg, 1);
}
}
}
- videobuf_dvb_unregister(&dev->dvb);
+ if (fe0->dvb.frontend)
+ videobuf_dvb_unregister_bus(&dev->frontends);
return 0;
}
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff