#include "saa7134.h"
#include <media/v4l2-common.h>
#include "dvb-pll.h"
+#include <dvb_frontend.h>
#include "mt352.h"
#include "mt352_priv.h" /* FIXME */
#include "tda1004x.h"
#include "nxt200x.h"
+#include "tuner-xc2028.h"
+#include "xc5000.h"
#include "tda10086.h"
#include "tda826x.h"
#include "tda827x.h"
#include "isl6421.h"
+#include "isl6405.h"
+#include "lnbp21.h"
+#include "tuner-simple.h"
+#include "tda10048.h"
+#include "tda18271.h"
+#include "lgdt3305.h"
+#include "tda8290.h"
+
+#include "zl10353.h"
+
+#include "zl10036.h"
+#include "zl10039.h"
+#include "mt312.h"
MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
MODULE_LICENSE("GPL");
-static unsigned int antenna_pwr = 0;
+static unsigned int antenna_pwr;
module_param(antenna_pwr, int, 0444);
MODULE_PARM_DESC(antenna_pwr,"enable antenna power (Pinnacle 300i)");
-static int use_frontend = 0;
+static int use_frontend;
module_param(use_frontend, int, 0644);
MODULE_PARM_DESC(use_frontend,"for cards with multiple frontends (0: terrestrial, 1: satellite)");
-static int debug = 0;
+static int debug;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "Turn on/off module debugging (default:off).");
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
#define dprintk(fmt, arg...) do { if (debug) \
printk(KERN_DEBUG "%s/dvb: " fmt, dev->name , ## arg); } while(0)
saa_setl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 28));
udelay(10);
ok = saa_readl(SAA7134_GPIO_GPSTATUS0) & (1 << 27);
- dprintk("%s %s\n", __FUNCTION__, ok ? "on" : "off");
+ dprintk("%s %s\n", __func__, ok ? "on" : "off");
if (!ok)
saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 26));
static u8 irq_cfg [] = { INTERRUPT_EN_0, 0x00, 0x00, 0x00, 0x00 };
struct saa7134_dev *dev= fe->dvb->priv;
- dprintk("%s called\n", __FUNCTION__);
+ dprintk("%s called\n", __func__);
mt352_write(fe, clock_config, sizeof(clock_config));
udelay(200);
return 0;
}
+static int mt352_avermedia_xc3028_init(struct dvb_frontend *fe)
+{
+ static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x2d };
+ static u8 reset [] = { RESET, 0x80 };
+ static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 };
+ static u8 agc_cfg [] = { AGC_TARGET, 0xe };
+ static u8 capt_range_cfg[] = { CAPT_RANGE, 0x33 };
+
+ mt352_write(fe, clock_config, sizeof(clock_config));
+ udelay(200);
+ mt352_write(fe, reset, sizeof(reset));
+ mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg));
+ mt352_write(fe, agc_cfg, sizeof(agc_cfg));
+ mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
+ return 0;
+}
+
static int mt352_pinnacle_tuner_set_params(struct dvb_frontend* fe,
struct dvb_frontend_parameters* params)
{
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
i2c_transfer(&dev->i2c_adap, &msg, 1);
- saa7134_i2c_call_clients(dev,VIDIOC_S_FREQUENCY,&f);
+ saa_call_all(dev, tuner, s_frequency, &f);
msg.buf = on;
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
.demod_init = mt352_aver777_init,
};
+static struct mt352_config avermedia_xc3028_mt352_dev = {
+ .demod_address = (0x1e >> 1),
+ .no_tuner = 1,
+ .demod_init = mt352_avermedia_xc3028_init,
+};
+
/* ==================================================================
* tda1004x based DVB-T cards, helper functions
*/
.request_firmware = philips_tda1004x_request_firmware
};
-/* ------------------------------------------------------------------ */
-
static struct tda1004x_config medion_cardbus = {
.demod_address = 0x08,
.invert = 1,
* tda 1004x based cards with philips silicon tuner
*/
-static void philips_tda827x_lna_gain(struct dvb_frontend *fe, int high)
-{
- struct saa7134_dev *dev = fe->dvb->priv;
- struct tda1004x_state *state = fe->demodulator_priv;
- u8 addr = state->config->i2c_gate;
- u8 config = state->config->tuner_config;
- u8 GP00_CF[] = {0x20, 0x01};
- u8 GP00_LEV[] = {0x22, 0x00};
-
- struct i2c_msg msg = {.addr = addr,.flags = 0,.buf = GP00_CF, .len = 2};
- if (config) {
- if (high) {
- dprintk("setting LNA to high gain\n");
- } else {
- dprintk("setting LNA to low gain\n");
- }
- }
- switch (config) {
- case 0: /* no LNA */
- break;
- case 1: /* switch is GPIO 0 of tda8290 */
- case 2:
- /* turn Vsync off */
- saa7134_set_gpio(dev, 22, 0);
- GP00_LEV[1] = high ? 0 : 1;
- if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1) {
- wprintk("could not access tda8290 at addr: 0x%02x\n",
- addr << 1);
- return;
- }
- msg.buf = GP00_LEV;
- if (config == 2)
- GP00_LEV[1] = high ? 1 : 0;
- i2c_transfer(&dev->i2c_adap, &msg, 1);
- break;
- case 3: /* switch with GPIO of saa713x */
- saa7134_set_gpio(dev, 22, high);
- break;
- }
-}
-
static int tda8290_i2c_gate_ctrl( struct dvb_frontend* fe, int enable)
{
struct tda1004x_state *state = fe->demodulator_priv;
return 0;
}
-/* ------------------------------------------------------------------ */
-
static int philips_tda827x_tuner_init(struct dvb_frontend *fe)
{
struct saa7134_dev *dev = fe->dvb->priv;
return 0;
}
-static struct tda827x_config tda827x_cfg = {
- .lna_gain = philips_tda827x_lna_gain,
- .init = philips_tda827x_tuner_init,
- .sleep = philips_tda827x_tuner_sleep
-};
-
-static void configure_tda827x_fe(struct saa7134_dev *dev, struct tda1004x_config *tda_conf)
+static int configure_tda827x_fe(struct saa7134_dev *dev,
+ struct tda1004x_config *cdec_conf,
+ struct tda827x_config *tuner_conf)
{
- dev->dvb.frontend = dvb_attach(tda10046_attach, tda_conf, &dev->i2c_adap);
- if (dev->dvb.frontend) {
- if (tda_conf->i2c_gate)
- dev->dvb.frontend->ops.i2c_gate_ctrl = tda8290_i2c_gate_ctrl;
- if (dvb_attach(tda827x_attach, dev->dvb.frontend, tda_conf->tuner_address,
- &dev->i2c_adap,&tda827x_cfg) == NULL) {
- wprintk("no tda827x tuner found at addr: %02x\n",
- tda_conf->tuner_address);
- }
+ struct videobuf_dvb_frontend *fe0;
+
+ /* Get the first frontend */
+ fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1);
+
+ fe0->dvb.frontend = dvb_attach(tda10046_attach, cdec_conf, &dev->i2c_adap);
+ if (fe0->dvb.frontend) {
+ if (cdec_conf->i2c_gate)
+ fe0->dvb.frontend->ops.i2c_gate_ctrl = tda8290_i2c_gate_ctrl;
+ if (dvb_attach(tda827x_attach, fe0->dvb.frontend,
+ cdec_conf->tuner_address,
+ &dev->i2c_adap, tuner_conf))
+ return 0;
+
+ wprintk("no tda827x tuner found at addr: %02x\n",
+ cdec_conf->tuner_address);
}
+ return -EINVAL;
}
/* ------------------------------------------------------------------ */
+static struct tda827x_config tda827x_cfg_0 = {
+ .init = philips_tda827x_tuner_init,
+ .sleep = philips_tda827x_tuner_sleep,
+ .config = 0,
+ .switch_addr = 0
+};
+
+static struct tda827x_config tda827x_cfg_1 = {
+ .init = philips_tda827x_tuner_init,
+ .sleep = philips_tda827x_tuner_sleep,
+ .config = 1,
+ .switch_addr = 0x4b
+};
+
+static struct tda827x_config tda827x_cfg_2 = {
+ .init = philips_tda827x_tuner_init,
+ .sleep = philips_tda827x_tuner_sleep,
+ .config = 2,
+ .switch_addr = 0x4b
+};
+
+static struct tda827x_config tda827x_cfg_2_sw42 = {
+ .init = philips_tda827x_tuner_init,
+ .sleep = philips_tda827x_tuner_sleep,
+ .config = 2,
+ .switch_addr = 0x42
+};
+
+/* ------------------------------------------------------------------ */
+
static struct tda1004x_config tda827x_lifeview_config = {
.demod_address = 0x08,
.invert = 1,
.if_freq = TDA10046_FREQ_045,
.i2c_gate = 0x4b,
.tuner_address = 0x61,
- .tuner_config = 0,
.antenna_switch= 1,
.request_firmware = philips_tda1004x_request_firmware
};
.if_freq = TDA10046_FREQ_045,
.i2c_gate = 0x4b,
.tuner_address = 0x61,
- .tuner_config = 0,
.request_firmware = philips_tda1004x_request_firmware
};
.if_freq = TDA10046_FREQ_045,
.i2c_gate = 0x4b,
.tuner_address = 0x60,
- .tuner_config = 0,
.request_firmware = philips_tda1004x_request_firmware
};
.if_freq = TDA10046_FREQ_045,
.i2c_gate = 0x4b,
.tuner_address = 0x61,
- .tuner_config = 2,
.antenna_switch= 1,
.request_firmware = philips_tda1004x_request_firmware
};
.if_freq = TDA10046_FREQ_045,
.i2c_gate = 0x4b,
.tuner_address = 0x61,
- .tuner_config = 1,
.request_firmware = philips_tda1004x_request_firmware
};
.if_freq = TDA10046_FREQ_045,
.i2c_gate = 0x4b,
.tuner_address = 0x61,
- .tuner_config = 1,
.request_firmware = philips_tda1004x_request_firmware
};
.if_freq = TDA10046_FREQ_045,
.i2c_gate = 0x4b,
.tuner_address = 0x61,
- .tuner_config = 0,
.antenna_switch= 2,
.request_firmware = philips_tda1004x_request_firmware
};
.if_freq = TDA10046_FREQ_045,
.i2c_gate = 0x4b,
.tuner_address = 0x60,
- .tuner_config = 0,
.request_firmware = philips_tda1004x_request_firmware
};
.if_freq = TDA10046_FREQ_045,
.i2c_gate = 0x4b,
.tuner_address = 0x61,
- .tuner_config = 2,
.antenna_switch= 2,
.request_firmware = philips_tda1004x_request_firmware
};
.if_freq = TDA10046_FREQ_045,
.i2c_gate = 0x4b,
.tuner_address = 0x61,
- .tuner_config = 2,
.antenna_switch= 2,
.request_firmware = philips_tda1004x_request_firmware
};
.if_freq = TDA10046_FREQ_045,
.i2c_gate = 0x4b,
.tuner_address = 0x61,
- .tuner_config = 2,
.antenna_switch= 1,
.request_firmware = philips_tda1004x_request_firmware
};
.if_freq = TDA10046_FREQ_045,
.i2c_gate = 0x4b,
.tuner_address = 0x60,
- .tuner_config = 0,
.antenna_switch= 1,
.request_firmware = philips_tda1004x_request_firmware
};
+static struct tda1004x_config twinhan_dtv_dvb_3056_config = {
+ .demod_address = 0x08,
+ .invert = 1,
+ .invert_oclk = 0,
+ .xtal_freq = TDA10046_XTAL_16M,
+ .agc_config = TDA10046_AGC_TDA827X,
+ .gpio_config = TDA10046_GP01_I,
+ .if_freq = TDA10046_FREQ_045,
+ .i2c_gate = 0x42,
+ .tuner_address = 0x61,
+ .antenna_switch = 1,
+ .request_firmware = philips_tda1004x_request_firmware
+};
+
+static struct tda1004x_config asus_tiger_3in1_config = {
+ .demod_address = 0x0b,
+ .invert = 1,
+ .invert_oclk = 0,
+ .xtal_freq = TDA10046_XTAL_16M,
+ .agc_config = TDA10046_AGC_TDA827X,
+ .gpio_config = TDA10046_GP11_I,
+ .if_freq = TDA10046_FREQ_045,
+ .i2c_gate = 0x4b,
+ .tuner_address = 0x61,
+ .antenna_switch = 1,
+ .request_firmware = philips_tda1004x_request_firmware
+};
+
/* ------------------------------------------------------------------
* special case: this card uses saa713x GPIO22 for the mode switch
*/
}
static struct tda827x_config ads_duo_cfg = {
- .lna_gain = philips_tda827x_lna_gain,
.init = ads_duo_tuner_init,
- .sleep = ads_duo_tuner_sleep
+ .sleep = ads_duo_tuner_sleep,
+ .config = 0
};
static struct tda1004x_config ads_tech_duo_config = {
.request_firmware = philips_tda1004x_request_firmware
};
+static struct zl10353_config behold_h6_config = {
+ .demod_address = 0x1e>>1,
+ .no_tuner = 1,
+ .parallel_ts = 1,
+ .disable_i2c_gate_ctrl = 1,
+};
+
+static struct xc5000_config behold_x7_tunerconfig = {
+ .i2c_address = 0xc2>>1,
+ .if_khz = 4560,
+ .radio_input = XC5000_RADIO_FM1,
+};
+
+static struct zl10353_config behold_x7_config = {
+ .demod_address = 0x1e>>1,
+ .if2 = 45600,
+ .no_tuner = 1,
+ .parallel_ts = 1,
+ .disable_i2c_gate_ctrl = 1,
+};
+
/* ==================================================================
* tda10086 based DVB-S cards, helper functions
*/
static struct tda10086_config flydvbs = {
.demod_address = 0x0e,
.invert = 0,
+ .diseqc_tone = 0,
+ .xtal_freq = TDA10086_XTAL_16M,
};
+static struct tda10086_config sd1878_4m = {
+ .demod_address = 0x0e,
+ .invert = 0,
+ .diseqc_tone = 0,
+ .xtal_freq = TDA10086_XTAL_4M,
+};
+
+/* ------------------------------------------------------------------
+ * special case: lnb supply is connected to the gated i2c
+ */
+
+static int md8800_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
+{
+ int res = -EIO;
+ struct saa7134_dev *dev = fe->dvb->priv;
+ if (fe->ops.i2c_gate_ctrl) {
+ fe->ops.i2c_gate_ctrl(fe, 1);
+ if (dev->original_set_voltage)
+ res = dev->original_set_voltage(fe, voltage);
+ fe->ops.i2c_gate_ctrl(fe, 0);
+ }
+ return res;
+};
+
+static int md8800_set_high_voltage(struct dvb_frontend *fe, long arg)
+{
+ int res = -EIO;
+ struct saa7134_dev *dev = fe->dvb->priv;
+ if (fe->ops.i2c_gate_ctrl) {
+ fe->ops.i2c_gate_ctrl(fe, 1);
+ if (dev->original_set_high_voltage)
+ res = dev->original_set_high_voltage(fe, arg);
+ fe->ops.i2c_gate_ctrl(fe, 0);
+ }
+ return res;
+};
+
+static int md8800_set_voltage2(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
+{
+ struct saa7134_dev *dev = fe->dvb->priv;
+ u8 wbuf[2] = { 0x1f, 00 };
+ u8 rbuf;
+ struct i2c_msg msg[] = { { .addr = 0x08, .flags = 0, .buf = wbuf, .len = 1 },
+ { .addr = 0x08, .flags = I2C_M_RD, .buf = &rbuf, .len = 1 } };
+
+ if (i2c_transfer(&dev->i2c_adap, msg, 2) != 2)
+ return -EIO;
+ /* NOTE: this assumes that gpo1 is used, it might be bit 5 (gpo2) */
+ if (voltage == SEC_VOLTAGE_18)
+ wbuf[1] = rbuf | 0x10;
+ else
+ wbuf[1] = rbuf & 0xef;
+ msg[0].len = 2;
+ i2c_transfer(&dev->i2c_adap, msg, 1);
+ return 0;
+}
+
+static int md8800_set_high_voltage2(struct dvb_frontend *fe, long arg)
+{
+ struct saa7134_dev *dev = fe->dvb->priv;
+ wprintk("%s: sorry can't set high LNB supply voltage from here\n", __func__);
+ return -EIO;
+}
+
/* ==================================================================
* nxt200x based ATSC cards, helper functions
*/
.demod_address = 0x0a,
};
+/* ------------------------------------------------------------------ */
+
+static struct mt312_config avertv_a700_mt312 = {
+ .demod_address = 0x0e,
+ .voltage_inverted = 1,
+};
+
+static struct zl10036_config avertv_a700_tuner = {
+ .tuner_address = 0x60,
+};
+
+static struct mt312_config zl10313_compro_s350_config = {
+ .demod_address = 0x0e,
+};
+
+static struct lgdt3305_config hcw_lgdt3305_config = {
+ .i2c_addr = 0x0e,
+ .mpeg_mode = LGDT3305_MPEG_SERIAL,
+ .tpclk_edge = LGDT3305_TPCLK_RISING_EDGE,
+ .tpvalid_polarity = LGDT3305_TP_VALID_HIGH,
+ .deny_i2c_rptr = 1,
+ .spectral_inversion = 1,
+ .qam_if_khz = 4000,
+ .vsb_if_khz = 3250,
+};
+
+static struct tda10048_config hcw_tda10048_config = {
+ .demod_address = 0x10 >> 1,
+ .output_mode = TDA10048_SERIAL_OUTPUT,
+ .fwbulkwritelen = TDA10048_BULKWRITE_200,
+ .inversion = TDA10048_INVERSION_ON,
+ .dtv6_if_freq_khz = TDA10048_IF_3300,
+ .dtv7_if_freq_khz = TDA10048_IF_3500,
+ .dtv8_if_freq_khz = TDA10048_IF_4000,
+ .clk_freq_khz = TDA10048_CLK_16000,
+ .disable_gate_access = 1,
+};
+
+static struct tda18271_std_map hauppauge_tda18271_std_map = {
+ .atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 4,
+ .if_lvl = 1, .rfagc_top = 0x58, },
+ .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 5,
+ .if_lvl = 1, .rfagc_top = 0x58, },
+};
+
+static struct tda18271_config hcw_tda18271_config = {
+ .std_map = &hauppauge_tda18271_std_map,
+ .gate = TDA18271_GATE_ANALOG,
+ .config = 3,
+ .output_opt = TDA18271_OUTPUT_LT_OFF,
+};
+
+static struct tda829x_config tda829x_no_probe = {
+ .probe_tuner = TDA829X_DONT_PROBE,
+};
+
+static struct tda10048_config zolid_tda10048_config = {
+ .demod_address = 0x10 >> 1,
+ .output_mode = TDA10048_PARALLEL_OUTPUT,
+ .fwbulkwritelen = TDA10048_BULKWRITE_200,
+ .inversion = TDA10048_INVERSION_ON,
+ .dtv6_if_freq_khz = TDA10048_IF_3300,
+ .dtv7_if_freq_khz = TDA10048_IF_3500,
+ .dtv8_if_freq_khz = TDA10048_IF_4000,
+ .clk_freq_khz = TDA10048_CLK_16000,
+ .disable_gate_access = 1,
+};
+
+static struct tda18271_config zolid_tda18271_config = {
+ .gate = TDA18271_GATE_ANALOG,
+};
+
/* ==================================================================
* Core code
*/
static int dvb_init(struct saa7134_dev *dev)
{
int ret;
+ int attach_xc3028 = 0;
+ struct videobuf_dvb_frontend *fe0;
+
+ /* FIXME: add support for multi-frontend */
+ mutex_init(&dev->frontends.lock);
+ INIT_LIST_HEAD(&dev->frontends.felist);
+
+ printk(KERN_INFO "%s() allocating 1 frontend\n", __func__);
+ fe0 = videobuf_dvb_alloc_frontend(&dev->frontends, 1);
+ if (!fe0) {
+ printk(KERN_ERR "%s() failed to alloc\n", __func__);
+ return -ENOMEM;
+ }
+
/* init struct videobuf_dvb */
dev->ts.nr_bufs = 32;
dev->ts.nr_packets = 32*4;
- dev->dvb.name = dev->name;
- videobuf_queue_pci_init(&dev->dvb.dvbq, &saa7134_ts_qops,
- dev->pci, &dev->slock,
+ fe0->dvb.name = dev->name;
+ videobuf_queue_sg_init(&fe0->dvb.dvbq, &saa7134_ts_qops,
+ &dev->pci->dev, &dev->slock,
V4L2_BUF_TYPE_VIDEO_CAPTURE,
V4L2_FIELD_ALTERNATE,
sizeof(struct saa7134_buf),
switch (dev->board) {
case SAA7134_BOARD_PINNACLE_300I_DVBT_PAL:
dprintk("pinnacle 300i dvb setup\n");
- dev->dvb.frontend = dvb_attach(mt352_attach, &pinnacle_300i,
+ fe0->dvb.frontend = dvb_attach(mt352_attach, &pinnacle_300i,
&dev->i2c_adap);
- if (dev->dvb.frontend) {
- dev->dvb.frontend->ops.tuner_ops.set_params = mt352_pinnacle_tuner_set_params;
+ if (fe0->dvb.frontend) {
+ fe0->dvb.frontend->ops.tuner_ops.set_params = mt352_pinnacle_tuner_set_params;
}
break;
case SAA7134_BOARD_AVERMEDIA_777:
case SAA7134_BOARD_AVERMEDIA_A16AR:
dprintk("avertv 777 dvb setup\n");
- dev->dvb.frontend = dvb_attach(mt352_attach, &avermedia_777,
+ fe0->dvb.frontend = dvb_attach(mt352_attach, &avermedia_777,
&dev->i2c_adap);
- if (dev->dvb.frontend) {
- dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
- NULL, DVB_PLL_PHILIPS_TD1316);
+ if (fe0->dvb.frontend) {
+ dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
+ &dev->i2c_adap, 0x61,
+ TUNER_PHILIPS_TD1316);
}
break;
+ case SAA7134_BOARD_AVERMEDIA_A16D:
+ dprintk("AverMedia A16D dvb setup\n");
+ fe0->dvb.frontend = dvb_attach(mt352_attach,
+ &avermedia_xc3028_mt352_dev,
+ &dev->i2c_adap);
+ attach_xc3028 = 1;
+ break;
case SAA7134_BOARD_MD7134:
- dev->dvb.frontend = dvb_attach(tda10046_attach,
+ fe0->dvb.frontend = dvb_attach(tda10046_attach,
&medion_cardbus,
&dev->i2c_adap);
- if (dev->dvb.frontend) {
- dvb_attach(dvb_pll_attach, dev->dvb.frontend, medion_cardbus.tuner_address,
- &dev->i2c_adap, DVB_PLL_FMD1216ME);
+ if (fe0->dvb.frontend) {
+ dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
+ &dev->i2c_adap, medion_cardbus.tuner_address,
+ TUNER_PHILIPS_FMD1216ME_MK3);
}
break;
case SAA7134_BOARD_PHILIPS_TOUGH:
- dev->dvb.frontend = dvb_attach(tda10046_attach,
+ fe0->dvb.frontend = dvb_attach(tda10046_attach,
&philips_tu1216_60_config,
&dev->i2c_adap);
- if (dev->dvb.frontend) {
- dev->dvb.frontend->ops.tuner_ops.init = philips_tu1216_init;
- dev->dvb.frontend->ops.tuner_ops.set_params = philips_tda6651_pll_set;
+ if (fe0->dvb.frontend) {
+ fe0->dvb.frontend->ops.tuner_ops.init = philips_tu1216_init;
+ fe0->dvb.frontend->ops.tuner_ops.set_params = philips_tda6651_pll_set;
}
break;
case SAA7134_BOARD_FLYDVBTDUO:
case SAA7134_BOARD_FLYDVBT_DUO_CARDBUS:
- configure_tda827x_fe(dev, &tda827x_lifeview_config);
+ if (configure_tda827x_fe(dev, &tda827x_lifeview_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_PHILIPS_EUROPA:
case SAA7134_BOARD_VIDEOMATE_DVBT_300:
- dev->dvb.frontend = dvb_attach(tda10046_attach,
+ case SAA7134_BOARD_ASUS_EUROPA_HYBRID:
+ fe0->dvb.frontend = dvb_attach(tda10046_attach,
&philips_europa_config,
&dev->i2c_adap);
- if (dev->dvb.frontend) {
- dev->original_demod_sleep = dev->dvb.frontend->ops.sleep;
- dev->dvb.frontend->ops.sleep = philips_europa_demod_sleep;
- dev->dvb.frontend->ops.tuner_ops.init = philips_europa_tuner_init;
- dev->dvb.frontend->ops.tuner_ops.sleep = philips_europa_tuner_sleep;
- dev->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params;
+ if (fe0->dvb.frontend) {
+ dev->original_demod_sleep = fe0->dvb.frontend->ops.sleep;
+ fe0->dvb.frontend->ops.sleep = philips_europa_demod_sleep;
+ fe0->dvb.frontend->ops.tuner_ops.init = philips_europa_tuner_init;
+ fe0->dvb.frontend->ops.tuner_ops.sleep = philips_europa_tuner_sleep;
+ fe0->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params;
}
break;
case SAA7134_BOARD_VIDEOMATE_DVBT_200:
- dev->dvb.frontend = dvb_attach(tda10046_attach,
+ fe0->dvb.frontend = dvb_attach(tda10046_attach,
&philips_tu1216_61_config,
&dev->i2c_adap);
- if (dev->dvb.frontend) {
- dev->dvb.frontend->ops.tuner_ops.init = philips_tu1216_init;
- dev->dvb.frontend->ops.tuner_ops.set_params = philips_tda6651_pll_set;
+ if (fe0->dvb.frontend) {
+ fe0->dvb.frontend->ops.tuner_ops.init = philips_tu1216_init;
+ fe0->dvb.frontend->ops.tuner_ops.set_params = philips_tda6651_pll_set;
}
break;
case SAA7134_BOARD_KWORLD_DVBT_210:
- configure_tda827x_fe(dev, &kworld_dvb_t_210_config);
+ if (configure_tda827x_fe(dev, &kworld_dvb_t_210_config,
+ &tda827x_cfg_2) < 0)
+ goto dettach_frontend;
+ break;
+ case SAA7134_BOARD_HAUPPAUGE_HVR1120:
+ fe0->dvb.frontend = dvb_attach(tda10048_attach,
+ &hcw_tda10048_config,
+ &dev->i2c_adap);
+ if (fe0->dvb.frontend != NULL) {
+ dvb_attach(tda829x_attach, fe0->dvb.frontend,
+ &dev->i2c_adap, 0x4b,
+ &tda829x_no_probe);
+ dvb_attach(tda18271_attach, fe0->dvb.frontend,
+ 0x60, &dev->i2c_adap,
+ &hcw_tda18271_config);
+ }
break;
case SAA7134_BOARD_PHILIPS_TIGER:
- configure_tda827x_fe(dev, &philips_tiger_config);
+ if (configure_tda827x_fe(dev, &philips_tiger_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_PINNACLE_PCTV_310i:
- configure_tda827x_fe(dev, &pinnacle_pctv_310i_config);
+ if (configure_tda827x_fe(dev, &pinnacle_pctv_310i_config,
+ &tda827x_cfg_1) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_HAUPPAUGE_HVR1110:
- configure_tda827x_fe(dev, &hauppauge_hvr_1110_config);
+ if (configure_tda827x_fe(dev, &hauppauge_hvr_1110_config,
+ &tda827x_cfg_1) < 0)
+ goto dettach_frontend;
+ break;
+ case SAA7134_BOARD_HAUPPAUGE_HVR1150:
+ fe0->dvb.frontend = dvb_attach(lgdt3305_attach,
+ &hcw_lgdt3305_config,
+ &dev->i2c_adap);
+ if (fe0->dvb.frontend) {
+ dvb_attach(tda829x_attach, fe0->dvb.frontend,
+ &dev->i2c_adap, 0x4b,
+ &tda829x_no_probe);
+ dvb_attach(tda18271_attach, fe0->dvb.frontend,
+ 0x60, &dev->i2c_adap,
+ &hcw_tda18271_config);
+ }
break;
case SAA7134_BOARD_ASUSTeK_P7131_DUAL:
- configure_tda827x_fe(dev, &asus_p7131_dual_config);
+ if (configure_tda827x_fe(dev, &asus_p7131_dual_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_FLYDVBT_LR301:
- configure_tda827x_fe(dev, &tda827x_lifeview_config);
+ if (configure_tda827x_fe(dev, &tda827x_lifeview_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_FLYDVB_TRIO:
- if(! use_frontend) { //terrestrial
- configure_tda827x_fe(dev, &lifeview_trio_config);
- } else { //satellite
- dev->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, &dev->i2c_adap);
- if (dev->dvb.frontend) {
- if (dvb_attach(tda826x_attach, dev->dvb.frontend, 0x63,
+ if (!use_frontend) { /* terrestrial */
+ if (configure_tda827x_fe(dev, &lifeview_trio_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
+ } else { /* satellite */
+ fe0->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, &dev->i2c_adap);
+ if (fe0->dvb.frontend) {
+ if (dvb_attach(tda826x_attach, fe0->dvb.frontend, 0x63,
&dev->i2c_adap, 0) == NULL) {
- wprintk("%s: Lifeview Trio, No tda826x found!\n", __FUNCTION__);
+ wprintk("%s: Lifeview Trio, No tda826x found!\n", __func__);
+ goto dettach_frontend;
}
- if (dvb_attach(isl6421_attach, dev->dvb.frontend, &dev->i2c_adap,
+ if (dvb_attach(isl6421_attach, fe0->dvb.frontend, &dev->i2c_adap,
0x08, 0, 0) == NULL) {
- wprintk("%s: Lifeview Trio, No ISL6421 found!\n", __FUNCTION__);
+ wprintk("%s: Lifeview Trio, No ISL6421 found!\n", __func__);
+ goto dettach_frontend;
}
}
}
break;
case SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331:
case SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS:
- dev->dvb.frontend = dvb_attach(tda10046_attach,
+ fe0->dvb.frontend = dvb_attach(tda10046_attach,
&ads_tech_duo_config,
&dev->i2c_adap);
- if (dev->dvb.frontend) {
- if (dvb_attach(tda827x_attach,dev->dvb.frontend,
- ads_tech_duo_config.tuner_address,
- &dev->i2c_adap,&ads_duo_cfg) == NULL) {
+ if (fe0->dvb.frontend) {
+ if (dvb_attach(tda827x_attach,fe0->dvb.frontend,
+ ads_tech_duo_config.tuner_address, &dev->i2c_adap,
+ &ads_duo_cfg) == NULL) {
wprintk("no tda827x tuner found at addr: %02x\n",
ads_tech_duo_config.tuner_address);
+ goto dettach_frontend;
}
- }
+ } else
+ wprintk("failed to attach tda10046\n");
break;
case SAA7134_BOARD_TEVION_DVBT_220RF:
- configure_tda827x_fe(dev, &tevion_dvbt220rf_config);
+ if (configure_tda827x_fe(dev, &tevion_dvbt220rf_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_MEDION_MD8800_QUADRO:
- configure_tda827x_fe(dev, &md8800_dvbt_config);
+ if (!use_frontend) { /* terrestrial */
+ if (configure_tda827x_fe(dev, &md8800_dvbt_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
+ } else { /* satellite */
+ fe0->dvb.frontend = dvb_attach(tda10086_attach,
+ &flydvbs, &dev->i2c_adap);
+ if (fe0->dvb.frontend) {
+ struct dvb_frontend *fe = fe0->dvb.frontend;
+ u8 dev_id = dev->eedata[2];
+ u8 data = 0xc4;
+ struct i2c_msg msg = {.addr = 0x08, .flags = 0, .len = 1};
+
+ if (dvb_attach(tda826x_attach, fe0->dvb.frontend,
+ 0x60, &dev->i2c_adap, 0) == NULL) {
+ wprintk("%s: Medion Quadro, no tda826x "
+ "found !\n", __func__);
+ goto dettach_frontend;
+ }
+ if (dev_id != 0x08) {
+ /* we need to open the i2c gate (we know it exists) */
+ fe->ops.i2c_gate_ctrl(fe, 1);
+ if (dvb_attach(isl6405_attach, fe,
+ &dev->i2c_adap, 0x08, 0, 0) == NULL) {
+ wprintk("%s: Medion Quadro, no ISL6405 "
+ "found !\n", __func__);
+ goto dettach_frontend;
+ }
+ if (dev_id == 0x07) {
+ /* fire up the 2nd section of the LNB supply since
+ we can't do this from the other section */
+ msg.buf = &data;
+ i2c_transfer(&dev->i2c_adap, &msg, 1);
+ }
+ fe->ops.i2c_gate_ctrl(fe, 0);
+ dev->original_set_voltage = fe->ops.set_voltage;
+ fe->ops.set_voltage = md8800_set_voltage;
+ dev->original_set_high_voltage = fe->ops.enable_high_lnb_voltage;
+ fe->ops.enable_high_lnb_voltage = md8800_set_high_voltage;
+ } else {
+ fe->ops.set_voltage = md8800_set_voltage2;
+ fe->ops.enable_high_lnb_voltage = md8800_set_high_voltage2;
+ }
+ }
+ }
break;
case SAA7134_BOARD_AVERMEDIA_AVERTVHD_A180:
- dev->dvb.frontend = dvb_attach(nxt200x_attach, &avertvhda180,
+ fe0->dvb.frontend = dvb_attach(nxt200x_attach, &avertvhda180,
&dev->i2c_adap);
- if (dev->dvb.frontend) {
- dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
+ if (fe0->dvb.frontend)
+ dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x61,
NULL, DVB_PLL_TDHU2);
- }
break;
+ case SAA7134_BOARD_ADS_INSTANT_HDTV_PCI:
case SAA7134_BOARD_KWORLD_ATSC110:
- dev->dvb.frontend = dvb_attach(nxt200x_attach, &kworldatsc110,
+ fe0->dvb.frontend = dvb_attach(nxt200x_attach, &kworldatsc110,
&dev->i2c_adap);
- if (dev->dvb.frontend) {
- dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
- NULL, DVB_PLL_TUV1236D);
- }
+ if (fe0->dvb.frontend)
+ dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
+ &dev->i2c_adap, 0x61,
+ TUNER_PHILIPS_TUV1236D);
break;
case SAA7134_BOARD_FLYDVBS_LR300:
- dev->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs,
+ fe0->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs,
&dev->i2c_adap);
- if (dev->dvb.frontend) {
- if (dvb_attach(tda826x_attach, dev->dvb.frontend, 0x60,
+ if (fe0->dvb.frontend) {
+ if (dvb_attach(tda826x_attach, fe0->dvb.frontend, 0x60,
&dev->i2c_adap, 0) == NULL) {
- wprintk("%s: No tda826x found!\n", __FUNCTION__);
+ wprintk("%s: No tda826x found!\n", __func__);
+ goto dettach_frontend;
}
- if (dvb_attach(isl6421_attach, dev->dvb.frontend,
+ if (dvb_attach(isl6421_attach, fe0->dvb.frontend,
&dev->i2c_adap, 0x08, 0, 0) == NULL) {
- wprintk("%s: No ISL6421 found!\n", __FUNCTION__);
+ wprintk("%s: No ISL6421 found!\n", __func__);
+ goto dettach_frontend;
}
}
break;
case SAA7134_BOARD_ASUS_EUROPA2_HYBRID:
- dev->dvb.frontend = tda10046_attach(&medion_cardbus,
- &dev->i2c_adap);
- if (dev->dvb.frontend) {
- dev->original_demod_sleep = dev->dvb.frontend->ops.sleep;
- dev->dvb.frontend->ops.sleep = philips_europa_demod_sleep;
-
- dvb_attach(dvb_pll_attach, dev->dvb.frontend, medion_cardbus.tuner_address,
- &dev->i2c_adap, DVB_PLL_FMD1216ME);
+ fe0->dvb.frontend = dvb_attach(tda10046_attach,
+ &medion_cardbus,
+ &dev->i2c_adap);
+ if (fe0->dvb.frontend) {
+ dev->original_demod_sleep = fe0->dvb.frontend->ops.sleep;
+ fe0->dvb.frontend->ops.sleep = philips_europa_demod_sleep;
+
+ dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
+ &dev->i2c_adap, medion_cardbus.tuner_address,
+ TUNER_PHILIPS_FMD1216ME_MK3);
}
break;
case SAA7134_BOARD_VIDEOMATE_DVBT_200A:
- dev->dvb.frontend = dvb_attach(tda10046_attach,
+ fe0->dvb.frontend = dvb_attach(tda10046_attach,
&philips_europa_config,
&dev->i2c_adap);
- if (dev->dvb.frontend) {
- dev->dvb.frontend->ops.tuner_ops.init = philips_td1316_tuner_init;
- dev->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params;
+ if (fe0->dvb.frontend) {
+ fe0->dvb.frontend->ops.tuner_ops.init = philips_td1316_tuner_init;
+ fe0->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params;
}
break;
case SAA7134_BOARD_CINERGY_HT_PCMCIA:
- configure_tda827x_fe(dev, &cinergy_ht_config);
+ if (configure_tda827x_fe(dev, &cinergy_ht_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_CINERGY_HT_PCI:
- configure_tda827x_fe(dev, &cinergy_ht_pci_config);
+ if (configure_tda827x_fe(dev, &cinergy_ht_pci_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_PHILIPS_TIGER_S:
- configure_tda827x_fe(dev, &philips_tiger_s_config);
+ if (configure_tda827x_fe(dev, &philips_tiger_s_config,
+ &tda827x_cfg_2) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_ASUS_P7131_4871:
- configure_tda827x_fe(dev, &asus_p7131_4871_config);
+ if (configure_tda827x_fe(dev, &asus_p7131_4871_config,
+ &tda827x_cfg_2) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_ASUSTeK_P7131_HYBRID_LNA:
- configure_tda827x_fe(dev, &asus_p7131_hybrid_lna_config);
+ if (configure_tda827x_fe(dev, &asus_p7131_hybrid_lna_config,
+ &tda827x_cfg_2) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_AVERMEDIA_SUPER_007:
- configure_tda827x_fe(dev, &avermedia_super_007_config);
+ if (configure_tda827x_fe(dev, &avermedia_super_007_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
+ break;
+ case SAA7134_BOARD_TWINHAN_DTV_DVB_3056:
+ if (configure_tda827x_fe(dev, &twinhan_dtv_dvb_3056_config,
+ &tda827x_cfg_2_sw42) < 0)
+ goto dettach_frontend;
+ break;
+ case SAA7134_BOARD_PHILIPS_SNAKE:
+ fe0->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs,
+ &dev->i2c_adap);
+ if (fe0->dvb.frontend) {
+ if (dvb_attach(tda826x_attach, fe0->dvb.frontend, 0x60,
+ &dev->i2c_adap, 0) == NULL) {
+ wprintk("%s: No tda826x found!\n", __func__);
+ goto dettach_frontend;
+ }
+ if (dvb_attach(lnbp21_attach, fe0->dvb.frontend,
+ &dev->i2c_adap, 0, 0) == NULL) {
+ wprintk("%s: No lnbp21 found!\n", __func__);
+ goto dettach_frontend;
+ }
+ }
+ break;
+ case SAA7134_BOARD_CREATIX_CTX953:
+ if (configure_tda827x_fe(dev, &md8800_dvbt_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
+ break;
+ case SAA7134_BOARD_MSI_TVANYWHERE_AD11:
+ if (configure_tda827x_fe(dev, &philips_tiger_s_config,
+ &tda827x_cfg_2) < 0)
+ goto dettach_frontend;
+ break;
+ case SAA7134_BOARD_AVERMEDIA_CARDBUS_506:
+ dprintk("AverMedia E506R dvb setup\n");
+ saa7134_set_gpio(dev, 25, 0);
+ msleep(10);
+ saa7134_set_gpio(dev, 25, 1);
+ fe0->dvb.frontend = dvb_attach(mt352_attach,
+ &avermedia_xc3028_mt352_dev,
+ &dev->i2c_adap);
+ attach_xc3028 = 1;
+ break;
+ case SAA7134_BOARD_MD7134_BRIDGE_2:
+ fe0->dvb.frontend = dvb_attach(tda10086_attach,
+ &sd1878_4m, &dev->i2c_adap);
+ if (fe0->dvb.frontend) {
+ struct dvb_frontend *fe;
+ if (dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x60,
+ &dev->i2c_adap, DVB_PLL_PHILIPS_SD1878_TDA8261) == NULL) {
+ wprintk("%s: MD7134 DVB-S, no SD1878 "
+ "found !\n", __func__);
+ goto dettach_frontend;
+ }
+ /* we need to open the i2c gate (we know it exists) */
+ fe = fe0->dvb.frontend;
+ fe->ops.i2c_gate_ctrl(fe, 1);
+ if (dvb_attach(isl6405_attach, fe,
+ &dev->i2c_adap, 0x08, 0, 0) == NULL) {
+ wprintk("%s: MD7134 DVB-S, no ISL6405 "
+ "found !\n", __func__);
+ goto dettach_frontend;
+ }
+ fe->ops.i2c_gate_ctrl(fe, 0);
+ dev->original_set_voltage = fe->ops.set_voltage;
+ fe->ops.set_voltage = md8800_set_voltage;
+ dev->original_set_high_voltage = fe->ops.enable_high_lnb_voltage;
+ fe->ops.enable_high_lnb_voltage = md8800_set_high_voltage;
+ }
+ break;
+ case SAA7134_BOARD_AVERMEDIA_M103:
+ saa7134_set_gpio(dev, 25, 0);
+ msleep(10);
+ saa7134_set_gpio(dev, 25, 1);
+ fe0->dvb.frontend = dvb_attach(mt352_attach,
+ &avermedia_xc3028_mt352_dev,
+ &dev->i2c_adap);
+ attach_xc3028 = 1;
+ break;
+ case SAA7134_BOARD_ASUSTeK_TIGER_3IN1:
+ if (!use_frontend) { /* terrestrial */
+ if (configure_tda827x_fe(dev, &asus_tiger_3in1_config,
+ &tda827x_cfg_2) < 0)
+ goto dettach_frontend;
+ } else { /* satellite */
+ fe0->dvb.frontend = dvb_attach(tda10086_attach,
+ &flydvbs, &dev->i2c_adap);
+ if (fe0->dvb.frontend) {
+ if (dvb_attach(tda826x_attach,
+ fe0->dvb.frontend, 0x60,
+ &dev->i2c_adap, 0) == NULL) {
+ wprintk("%s: Asus Tiger 3in1, no "
+ "tda826x found!\n", __func__);
+ goto dettach_frontend;
+ }
+ if (dvb_attach(lnbp21_attach, fe0->dvb.frontend,
+ &dev->i2c_adap, 0, 0) == NULL) {
+ wprintk("%s: Asus Tiger 3in1, no lnbp21"
+ " found!\n", __func__);
+ goto dettach_frontend;
+ }
+ }
+ }
+ break;
+ case SAA7134_BOARD_ASUSTeK_TIGER:
+ if (configure_tda827x_fe(dev, &philips_tiger_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
+ break;
+ case SAA7134_BOARD_BEHOLD_H6:
+ fe0->dvb.frontend = dvb_attach(zl10353_attach,
+ &behold_h6_config,
+ &dev->i2c_adap);
+ if (fe0->dvb.frontend) {
+ dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
+ &dev->i2c_adap, 0x61,
+ TUNER_PHILIPS_FMD1216MEX_MK3);
+ }
+ break;
+ case SAA7134_BOARD_BEHOLD_X7:
+ fe0->dvb.frontend = dvb_attach(zl10353_attach,
+ &behold_x7_config,
+ &dev->i2c_adap);
+ if (fe0->dvb.frontend) {
+ dvb_attach(xc5000_attach, fe0->dvb.frontend,
+ &dev->i2c_adap, &behold_x7_tunerconfig);
+ }
+ break;
+ case SAA7134_BOARD_AVERMEDIA_A700_PRO:
+ case SAA7134_BOARD_AVERMEDIA_A700_HYBRID:
+ /* Zarlink ZL10313 */
+ fe0->dvb.frontend = dvb_attach(mt312_attach,
+ &avertv_a700_mt312, &dev->i2c_adap);
+ if (fe0->dvb.frontend) {
+ if (dvb_attach(zl10036_attach, fe0->dvb.frontend,
+ &avertv_a700_tuner, &dev->i2c_adap) == NULL) {
+ wprintk("%s: No zl10036 found!\n",
+ __func__);
+ }
+ }
+ break;
+ case SAA7134_BOARD_VIDEOMATE_S350:
+ fe0->dvb.frontend = dvb_attach(mt312_attach,
+ &zl10313_compro_s350_config, &dev->i2c_adap);
+ if (fe0->dvb.frontend)
+ if (dvb_attach(zl10039_attach, fe0->dvb.frontend,
+ 0x60, &dev->i2c_adap) == NULL)
+ wprintk("%s: No zl10039 found!\n",
+ __func__);
+
+ break;
+ case SAA7134_BOARD_ZOLID_HYBRID_PCI:
+ fe0->dvb.frontend = dvb_attach(tda10048_attach,
+ &zolid_tda10048_config,
+ &dev->i2c_adap);
+ if (fe0->dvb.frontend != NULL) {
+ dvb_attach(tda829x_attach, fe0->dvb.frontend,
+ &dev->i2c_adap, 0x4b,
+ &tda829x_no_probe);
+ dvb_attach(tda18271_attach, fe0->dvb.frontend,
+ 0x60, &dev->i2c_adap,
+ &zolid_tda18271_config);
+ }
break;
default:
wprintk("Huh? unknown DVB card?\n");
break;
}
- if (NULL == dev->dvb.frontend) {
+ if (attach_xc3028) {
+ struct dvb_frontend *fe;
+ struct xc2028_config cfg = {
+ .i2c_adap = &dev->i2c_adap,
+ .i2c_addr = 0x61,
+ };
+
+ if (!fe0->dvb.frontend)
+ goto dettach_frontend;
+
+ fe = dvb_attach(xc2028_attach, fe0->dvb.frontend, &cfg);
+ if (!fe) {
+ printk(KERN_ERR "%s/2: xc3028 attach failed\n",
+ dev->name);
+ goto dettach_frontend;
+ }
+ }
+
+ if (NULL == fe0->dvb.frontend) {
printk(KERN_ERR "%s/dvb: frontend initialization failed\n", dev->name);
- return -1;
+ goto dettach_frontend;
}
+ /* define general-purpose callback pointer */
+ fe0->dvb.frontend->callback = saa7134_tuner_callback;
/* register everything else */
- ret = videobuf_dvb_register(&dev->dvb, THIS_MODULE, dev, &dev->pci->dev);
+ ret = videobuf_dvb_register_bus(&dev->frontends, THIS_MODULE, dev,
+ &dev->pci->dev, adapter_nr, 0, NULL);
/* this sequence is necessary to make the tda1004x load its firmware
* and to enter analog mode of hybrid boards
*/
if (!ret) {
- if (dev->dvb.frontend->ops.init)
- dev->dvb.frontend->ops.init(dev->dvb.frontend);
- if (dev->dvb.frontend->ops.sleep)
- dev->dvb.frontend->ops.sleep(dev->dvb.frontend);
- if (dev->dvb.frontend->ops.tuner_ops.sleep)
- dev->dvb.frontend->ops.tuner_ops.sleep(dev->dvb.frontend);
+ if (fe0->dvb.frontend->ops.init)
+ fe0->dvb.frontend->ops.init(fe0->dvb.frontend);
+ if (fe0->dvb.frontend->ops.sleep)
+ fe0->dvb.frontend->ops.sleep(fe0->dvb.frontend);
+ if (fe0->dvb.frontend->ops.tuner_ops.sleep)
+ fe0->dvb.frontend->ops.tuner_ops.sleep(fe0->dvb.frontend);
}
return ret;
+
+dettach_frontend:
+ videobuf_dvb_dealloc_frontends(&dev->frontends);
+ return -EINVAL;
}
static int dvb_fini(struct saa7134_dev *dev)
{
- static int on = TDA9887_PRESENT | TDA9887_PORT2_INACTIVE;
+ struct videobuf_dvb_frontend *fe0;
+
+ /* Get the first frontend */
+ fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1);
+ if (!fe0)
+ return -EINVAL;
+
+ /* FIXME: I suspect that this code is bogus, since the entry for
+ Pinnacle 300I DVB-T PAL already defines the proper init to allow
+ the detection of mt2032 (TDA9887_PORT2_INACTIVE)
+ */
+ if (dev->board == SAA7134_BOARD_PINNACLE_300I_DVBT_PAL) {
+ struct v4l2_priv_tun_config tda9887_cfg;
+ static int on = TDA9887_PRESENT | TDA9887_PORT2_INACTIVE;
+
+ tda9887_cfg.tuner = TUNER_TDA9887;
+ tda9887_cfg.priv = &on;
- switch (dev->board) {
- case SAA7134_BOARD_PINNACLE_300I_DVBT_PAL:
/* otherwise we don't detect the tuner on next insmod */
- saa7134_i2c_call_clients(dev,TDA9887_SET_CONFIG,&on);
- break;
- };
- videobuf_dvb_unregister(&dev->dvb);
+ saa_call_all(dev, tuner, s_config, &tda9887_cfg);
+ } else if (dev->board == SAA7134_BOARD_MEDION_MD8800_QUADRO) {
+ if ((dev->eedata[2] == 0x07) && use_frontend) {
+ /* turn off the 2nd lnb supply */
+ u8 data = 0x80;
+ struct i2c_msg msg = {.addr = 0x08, .buf = &data, .flags = 0, .len = 1};
+ struct dvb_frontend *fe;
+ fe = fe0->dvb.frontend;
+ if (fe->ops.i2c_gate_ctrl) {
+ fe->ops.i2c_gate_ctrl(fe, 1);
+ i2c_transfer(&dev->i2c_adap, &msg, 1);
+ fe->ops.i2c_gate_ctrl(fe, 0);
+ }
+ }
+ }
+ videobuf_dvb_unregister_bus(&dev->frontends);
return 0;
}