* Note: the saa7126 is identical to the saa7127, and the saa7128 is
* identical to the saa7129, except that the saa7126 and saa7128 have
* macrovision anti-taping support. This driver will almost certainly
- * work find for those chips, except of course for the missing anti-taping
+ * work fine for those chips, except of course for the missing anti-taping
* support.
*
* This program is free software; you can redistribute it and/or modify
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/videodev2.h>
-#include <media/v4l2-common.h>
+#include <media/v4l2-device.h>
#include <media/v4l2-chip-ident.h>
#include <media/v4l2-i2c-drv.h>
#include <media/saa7127.h>
{ SAA7127_REG_COPYGEN_0, 0x77 },
{ SAA7127_REG_COPYGEN_1, 0x41 },
{ SAA7127_REG_COPYGEN_2, 0x00 }, /* Macrovision enable/disable */
- { SAA7127_REG_OUTPUT_PORT_CONTROL, 0x9e },
+ { SAA7127_REG_OUTPUT_PORT_CONTROL, 0xbf },
{ SAA7127_REG_GAIN_LUMINANCE_RGB, 0x00 },
{ SAA7127_REG_GAIN_COLORDIFF_RGB, 0x00 },
{ SAA7127_REG_INPUT_PORT_CONTROL_1, 0x80 }, /* for color bars */
#define SAA7127_60HZ_DAC_CONTROL 0x15
static const struct i2c_reg_value saa7127_init_config_60hz[] = {
{ SAA7127_REG_BURST_START, 0x19 },
- /* BURST_END is also used as a chip ID in saa7127_detect_client */
+ /* BURST_END is also used as a chip ID in saa7127_probe */
{ SAA7127_REG_BURST_END, 0x1d },
{ SAA7127_REG_CHROMA_PHASE, 0xa3 },
{ SAA7127_REG_GAINU, 0x98 },
{ 0, 0 }
};
-#define SAA7127_50HZ_DAC_CONTROL 0x02
-static struct i2c_reg_value saa7127_init_config_50hz[] = {
+#define SAA7127_50HZ_PAL_DAC_CONTROL 0x02
+static struct i2c_reg_value saa7127_init_config_50hz_pal[] = {
{ SAA7127_REG_BURST_START, 0x21 },
- /* BURST_END is also used as a chip ID in saa7127_detect_client */
+ /* BURST_END is also used as a chip ID in saa7127_probe */
{ SAA7127_REG_BURST_END, 0x1d },
{ SAA7127_REG_CHROMA_PHASE, 0x3f },
{ SAA7127_REG_GAINU, 0x7d },
{ 0, 0 }
};
+#define SAA7127_50HZ_SECAM_DAC_CONTROL 0x08
+static struct i2c_reg_value saa7127_init_config_50hz_secam[] = {
+ { SAA7127_REG_BURST_START, 0x21 },
+ /* BURST_END is also used as a chip ID in saa7127_probe */
+ { SAA7127_REG_BURST_END, 0x1d },
+ { SAA7127_REG_CHROMA_PHASE, 0x3f },
+ { SAA7127_REG_GAINU, 0x6a },
+ { SAA7127_REG_GAINV, 0x81 },
+ { SAA7127_REG_BLACK_LEVEL, 0x33 },
+ { SAA7127_REG_BLANKING_LEVEL, 0x35 },
+ { SAA7127_REG_VBI_BLANKING, 0x35 },
+ { SAA7127_REG_DAC_CONTROL, 0x08 },
+ { SAA7127_REG_BURST_AMP, 0x2f },
+ { SAA7127_REG_SUBC3, 0xb2 },
+ { SAA7127_REG_SUBC2, 0x3b },
+ { SAA7127_REG_SUBC1, 0xa3 },
+ { SAA7127_REG_SUBC0, 0x28 },
+ { SAA7127_REG_MULTI, 0x90 },
+ { SAA7127_REG_CLOSED_CAPTION, 0x00 },
+ { 0, 0 }
+};
+
/*
**********************************************************************
*
*/
struct saa7127_state {
+ struct v4l2_subdev sd;
v4l2_std_id std;
u32 ident;
enum saa7127_input_type input_type;
u8 reg_61;
};
+static inline struct saa7127_state *to_state(struct v4l2_subdev *sd)
+{
+ return container_of(sd, struct saa7127_state, sd);
+}
+
static const char * const output_strs[] =
{
"S-Video + Composite",
/* ----------------------------------------------------------------------- */
-static int saa7127_read(struct i2c_client *client, u8 reg)
+static int saa7127_read(struct v4l2_subdev *sd, u8 reg)
{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+
return i2c_smbus_read_byte_data(client, reg);
}
/* ----------------------------------------------------------------------- */
-static int saa7127_write(struct i2c_client *client, u8 reg, u8 val)
+static int saa7127_write(struct v4l2_subdev *sd, u8 reg, u8 val)
{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
int i;
for (i = 0; i < 3; i++) {
if (i2c_smbus_write_byte_data(client, reg, val) == 0)
return 0;
}
- v4l_err(client, "I2C Write Problem\n");
+ v4l2_err(sd, "I2C Write Problem\n");
return -1;
}
/* ----------------------------------------------------------------------- */
-static int saa7127_write_inittab(struct i2c_client *client,
+static int saa7127_write_inittab(struct v4l2_subdev *sd,
const struct i2c_reg_value *regs)
{
while (regs->reg != 0) {
- saa7127_write(client, regs->reg, regs->value);
+ saa7127_write(sd, regs->reg, regs->value);
regs++;
}
return 0;
/* ----------------------------------------------------------------------- */
-static int saa7127_set_vps(struct i2c_client *client, struct v4l2_sliced_vbi_data *data)
+static int saa7127_set_vps(struct v4l2_subdev *sd, const struct v4l2_sliced_vbi_data *data)
{
- struct saa7127_state *state = i2c_get_clientdata(client);
+ struct saa7127_state *state = to_state(sd);
int enable = (data->line != 0);
if (enable && (data->field != 0 || data->line != 16))
return -EINVAL;
if (state->vps_enable != enable) {
- v4l_dbg(1, debug, client, "Turn VPS Signal %s\n", enable ? "on" : "off");
- saa7127_write(client, 0x54, enable << 7);
+ v4l2_dbg(1, debug, sd, "Turn VPS Signal %s\n", enable ? "on" : "off");
+ saa7127_write(sd, 0x54, enable << 7);
state->vps_enable = enable;
}
if (!enable)
state->vps_data[2] = data->data[9];
state->vps_data[3] = data->data[10];
state->vps_data[4] = data->data[11];
- v4l_dbg(1, debug, client, "Set VPS data %02x %02x %02x %02x %02x\n",
+ v4l2_dbg(1, debug, sd, "Set VPS data %02x %02x %02x %02x %02x\n",
state->vps_data[0], state->vps_data[1],
state->vps_data[2], state->vps_data[3],
state->vps_data[4]);
- saa7127_write(client, 0x55, state->vps_data[0]);
- saa7127_write(client, 0x56, state->vps_data[1]);
- saa7127_write(client, 0x57, state->vps_data[2]);
- saa7127_write(client, 0x58, state->vps_data[3]);
- saa7127_write(client, 0x59, state->vps_data[4]);
+ saa7127_write(sd, 0x55, state->vps_data[0]);
+ saa7127_write(sd, 0x56, state->vps_data[1]);
+ saa7127_write(sd, 0x57, state->vps_data[2]);
+ saa7127_write(sd, 0x58, state->vps_data[3]);
+ saa7127_write(sd, 0x59, state->vps_data[4]);
return 0;
}
/* ----------------------------------------------------------------------- */
-static int saa7127_set_cc(struct i2c_client *client, struct v4l2_sliced_vbi_data *data)
+static int saa7127_set_cc(struct v4l2_subdev *sd, const struct v4l2_sliced_vbi_data *data)
{
- struct saa7127_state *state = i2c_get_clientdata(client);
+ struct saa7127_state *state = to_state(sd);
u16 cc = data->data[1] << 8 | data->data[0];
int enable = (data->line != 0);
if (enable && (data->field != 0 || data->line != 21))
return -EINVAL;
if (state->cc_enable != enable) {
- v4l_dbg(1, debug, client,
+ v4l2_dbg(1, debug, sd,
"Turn CC %s\n", enable ? "on" : "off");
- saa7127_write(client, SAA7127_REG_CLOSED_CAPTION,
+ saa7127_write(sd, SAA7127_REG_CLOSED_CAPTION,
(state->xds_enable << 7) | (enable << 6) | 0x11);
state->cc_enable = enable;
}
if (!enable)
return 0;
- v4l_dbg(2, debug, client, "CC data: %04x\n", cc);
- saa7127_write(client, SAA7127_REG_LINE_21_ODD_0, cc & 0xff);
- saa7127_write(client, SAA7127_REG_LINE_21_ODD_1, cc >> 8);
+ v4l2_dbg(2, debug, sd, "CC data: %04x\n", cc);
+ saa7127_write(sd, SAA7127_REG_LINE_21_ODD_0, cc & 0xff);
+ saa7127_write(sd, SAA7127_REG_LINE_21_ODD_1, cc >> 8);
state->cc_data = cc;
return 0;
}
/* ----------------------------------------------------------------------- */
-static int saa7127_set_xds(struct i2c_client *client, struct v4l2_sliced_vbi_data *data)
+static int saa7127_set_xds(struct v4l2_subdev *sd, const struct v4l2_sliced_vbi_data *data)
{
- struct saa7127_state *state = i2c_get_clientdata(client);
+ struct saa7127_state *state = to_state(sd);
u16 xds = data->data[1] << 8 | data->data[0];
int enable = (data->line != 0);
if (enable && (data->field != 1 || data->line != 21))
return -EINVAL;
if (state->xds_enable != enable) {
- v4l_dbg(1, debug, client, "Turn XDS %s\n", enable ? "on" : "off");
- saa7127_write(client, SAA7127_REG_CLOSED_CAPTION,
+ v4l2_dbg(1, debug, sd, "Turn XDS %s\n", enable ? "on" : "off");
+ saa7127_write(sd, SAA7127_REG_CLOSED_CAPTION,
(enable << 7) | (state->cc_enable << 6) | 0x11);
state->xds_enable = enable;
}
if (!enable)
return 0;
- v4l_dbg(2, debug, client, "XDS data: %04x\n", xds);
- saa7127_write(client, SAA7127_REG_LINE_21_EVEN_0, xds & 0xff);
- saa7127_write(client, SAA7127_REG_LINE_21_EVEN_1, xds >> 8);
+ v4l2_dbg(2, debug, sd, "XDS data: %04x\n", xds);
+ saa7127_write(sd, SAA7127_REG_LINE_21_EVEN_0, xds & 0xff);
+ saa7127_write(sd, SAA7127_REG_LINE_21_EVEN_1, xds >> 8);
state->xds_data = xds;
return 0;
}
/* ----------------------------------------------------------------------- */
-static int saa7127_set_wss(struct i2c_client *client, struct v4l2_sliced_vbi_data *data)
+static int saa7127_set_wss(struct v4l2_subdev *sd, const struct v4l2_sliced_vbi_data *data)
{
- struct saa7127_state *state = i2c_get_clientdata(client);
+ struct saa7127_state *state = to_state(sd);
int enable = (data->line != 0);
if (enable && (data->field != 0 || data->line != 23))
return -EINVAL;
if (state->wss_enable != enable) {
- v4l_dbg(1, debug, client, "Turn WSS %s\n", enable ? "on" : "off");
- saa7127_write(client, 0x27, enable << 7);
+ v4l2_dbg(1, debug, sd, "Turn WSS %s\n", enable ? "on" : "off");
+ saa7127_write(sd, 0x27, enable << 7);
state->wss_enable = enable;
}
if (!enable)
return 0;
- saa7127_write(client, 0x26, data->data[0]);
- saa7127_write(client, 0x27, 0x80 | (data->data[1] & 0x3f));
- v4l_dbg(1, debug, client,
+ saa7127_write(sd, 0x26, data->data[0]);
+ saa7127_write(sd, 0x27, 0x80 | (data->data[1] & 0x3f));
+ v4l2_dbg(1, debug, sd,
"WSS mode: %s\n", wss_strs[data->data[0] & 0xf]);
state->wss_mode = (data->data[1] & 0x3f) << 8 | data->data[0];
return 0;
/* ----------------------------------------------------------------------- */
-static int saa7127_set_video_enable(struct i2c_client *client, int enable)
+static int saa7127_set_video_enable(struct v4l2_subdev *sd, int enable)
{
- struct saa7127_state *state = i2c_get_clientdata(client);
+ struct saa7127_state *state = to_state(sd);
if (enable) {
- v4l_dbg(1, debug, client, "Enable Video Output\n");
- saa7127_write(client, 0x2d, state->reg_2d);
- saa7127_write(client, 0x61, state->reg_61);
+ v4l2_dbg(1, debug, sd, "Enable Video Output\n");
+ saa7127_write(sd, 0x2d, state->reg_2d);
+ saa7127_write(sd, 0x61, state->reg_61);
} else {
- v4l_dbg(1, debug, client, "Disable Video Output\n");
- saa7127_write(client, 0x2d, (state->reg_2d & 0xf0));
- saa7127_write(client, 0x61, (state->reg_61 | 0xc0));
+ v4l2_dbg(1, debug, sd, "Disable Video Output\n");
+ saa7127_write(sd, 0x2d, (state->reg_2d & 0xf0));
+ saa7127_write(sd, 0x61, (state->reg_61 | 0xc0));
}
state->video_enable = enable;
return 0;
/* ----------------------------------------------------------------------- */
-static int saa7127_set_std(struct i2c_client *client, v4l2_std_id std)
+static int saa7127_set_std(struct v4l2_subdev *sd, v4l2_std_id std)
{
- struct saa7127_state *state = i2c_get_clientdata(client);
+ struct saa7127_state *state = to_state(sd);
const struct i2c_reg_value *inittab;
if (std & V4L2_STD_525_60) {
- v4l_dbg(1, debug, client, "Selecting 60 Hz video Standard\n");
+ v4l2_dbg(1, debug, sd, "Selecting 60 Hz video Standard\n");
inittab = saa7127_init_config_60hz;
state->reg_61 = SAA7127_60HZ_DAC_CONTROL;
+
+ } else if (state->ident == V4L2_IDENT_SAA7129 &&
+ (std & V4L2_STD_SECAM) &&
+ !(std & (V4L2_STD_625_50 & ~V4L2_STD_SECAM))) {
+
+ /* If and only if SECAM, with a SAA712[89] */
+ v4l2_dbg(1, debug, sd,
+ "Selecting 50 Hz SECAM video Standard\n");
+ inittab = saa7127_init_config_50hz_secam;
+ state->reg_61 = SAA7127_50HZ_SECAM_DAC_CONTROL;
+
} else {
- v4l_dbg(1, debug, client, "Selecting 50 Hz video Standard\n");
- inittab = saa7127_init_config_50hz;
- state->reg_61 = SAA7127_50HZ_DAC_CONTROL;
+ v4l2_dbg(1, debug, sd, "Selecting 50 Hz PAL video Standard\n");
+ inittab = saa7127_init_config_50hz_pal;
+ state->reg_61 = SAA7127_50HZ_PAL_DAC_CONTROL;
}
/* Write Table */
- saa7127_write_inittab(client, inittab);
+ saa7127_write_inittab(sd, inittab);
state->std = std;
return 0;
}
/* ----------------------------------------------------------------------- */
-static int saa7127_set_output_type(struct i2c_client *client, int output)
+static int saa7127_set_output_type(struct v4l2_subdev *sd, int output)
{
- struct saa7127_state *state = i2c_get_clientdata(client);
+ struct saa7127_state *state = to_state(sd);
switch (output) {
case SAA7127_OUTPUT_TYPE_RGB:
break;
case SAA7127_OUTPUT_TYPE_COMPOSITE:
- state->reg_2d = 0x08; /* 00001000 CVBS only, RGB DAC's off (high impedance mode) */
+ if (state->ident == V4L2_IDENT_SAA7129)
+ state->reg_2d = 0x20; /* CVBS only */
+ else
+ state->reg_2d = 0x08; /* 00001000 CVBS only, RGB DAC's off (high impedance mode) */
state->reg_3a = 0x13; /* by default switch YUV to RGB-matrix on */
break;
case SAA7127_OUTPUT_TYPE_SVIDEO:
- state->reg_2d = 0xff; /* 11111111 croma -> R, luma -> CVBS + G + B */
+ if (state->ident == V4L2_IDENT_SAA7129)
+ state->reg_2d = 0x18; /* Y + C */
+ else
+ state->reg_2d = 0xff; /*11111111 croma -> R, luma -> CVBS + G + B */
state->reg_3a = 0x13; /* by default switch YUV to RGB-matrix on */
break;
break;
case SAA7127_OUTPUT_TYPE_BOTH:
- state->reg_2d = 0xbf;
+ if (state->ident == V4L2_IDENT_SAA7129)
+ state->reg_2d = 0x38;
+ else
+ state->reg_2d = 0xbf;
state->reg_3a = 0x13; /* by default switch YUV to RGB-matrix on */
break;
default:
return -EINVAL;
}
- v4l_dbg(1, debug, client,
+ v4l2_dbg(1, debug, sd,
"Selecting %s output type\n", output_strs[output]);
/* Configure Encoder */
- saa7127_write(client, 0x2d, state->reg_2d);
- saa7127_write(client, 0x3a, state->reg_3a | state->reg_3a_cb);
+ saa7127_write(sd, 0x2d, state->reg_2d);
+ saa7127_write(sd, 0x3a, state->reg_3a | state->reg_3a_cb);
state->output_type = output;
return 0;
}
/* ----------------------------------------------------------------------- */
-static int saa7127_set_input_type(struct i2c_client *client, int input)
+static int saa7127_set_input_type(struct v4l2_subdev *sd, int input)
{
- struct saa7127_state *state = i2c_get_clientdata(client);
+ struct saa7127_state *state = to_state(sd);
switch (input) {
case SAA7127_INPUT_TYPE_NORMAL: /* avia */
- v4l_dbg(1, debug, client, "Selecting Normal Encoder Input\n");
+ v4l2_dbg(1, debug, sd, "Selecting Normal Encoder Input\n");
state->reg_3a_cb = 0;
break;
case SAA7127_INPUT_TYPE_TEST_IMAGE: /* color bar */
- v4l_dbg(1, debug, client, "Selecting Color Bar generator\n");
+ v4l2_dbg(1, debug, sd, "Selecting Color Bar generator\n");
state->reg_3a_cb = 0x80;
break;
default:
return -EINVAL;
}
- saa7127_write(client, 0x3a, state->reg_3a | state->reg_3a_cb);
+ saa7127_write(sd, 0x3a, state->reg_3a | state->reg_3a_cb);
state->input_type = input;
return 0;
}
/* ----------------------------------------------------------------------- */
-static int saa7127_command(struct i2c_client *client,
- unsigned int cmd, void *arg)
+static int saa7127_s_std_output(struct v4l2_subdev *sd, v4l2_std_id std)
{
- struct saa7127_state *state = i2c_get_clientdata(client);
- struct v4l2_format *fmt = arg;
- struct v4l2_routing *route = arg;
-
- switch (cmd) {
- case VIDIOC_INT_S_STD_OUTPUT:
- if (state->std == *(v4l2_std_id *)arg)
- break;
- return saa7127_set_std(client, *(v4l2_std_id *)arg);
-
- case VIDIOC_INT_G_STD_OUTPUT:
- *(v4l2_std_id *)arg = state->std;
- break;
+ struct saa7127_state *state = to_state(sd);
- case VIDIOC_INT_G_VIDEO_ROUTING:
- route->input = state->input_type;
- route->output = state->output_type;
- break;
+ if (state->std == std)
+ return 0;
+ return saa7127_set_std(sd, std);
+}
- case VIDIOC_INT_S_VIDEO_ROUTING:
- {
- int rc = 0;
+static int saa7127_s_routing(struct v4l2_subdev *sd,
+ u32 input, u32 output, u32 config)
+{
+ struct saa7127_state *state = to_state(sd);
+ int rc = 0;
+
+ if (state->input_type != input)
+ rc = saa7127_set_input_type(sd, input);
+ if (rc == 0 && state->output_type != output)
+ rc = saa7127_set_output_type(sd, output);
+ return rc;
+}
- if (state->input_type != route->input)
- rc = saa7127_set_input_type(client, route->input);
- if (rc == 0 && state->output_type != route->output)
- rc = saa7127_set_output_type(client, route->output);
- return rc;
- }
+static int saa7127_s_stream(struct v4l2_subdev *sd, int enable)
+{
+ struct saa7127_state *state = to_state(sd);
- case VIDIOC_STREAMON:
- case VIDIOC_STREAMOFF:
- if (state->video_enable == (cmd == VIDIOC_STREAMON))
- break;
- return saa7127_set_video_enable(client, cmd == VIDIOC_STREAMON);
-
- case VIDIOC_G_FMT:
- if (fmt->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE)
- return -EINVAL;
-
- memset(&fmt->fmt.sliced, 0, sizeof(fmt->fmt.sliced));
- if (state->vps_enable)
- fmt->fmt.sliced.service_lines[0][16] = V4L2_SLICED_VPS;
- if (state->wss_enable)
- fmt->fmt.sliced.service_lines[0][23] = V4L2_SLICED_WSS_625;
- if (state->cc_enable) {
- fmt->fmt.sliced.service_lines[0][21] = V4L2_SLICED_CAPTION_525;
- fmt->fmt.sliced.service_lines[1][21] = V4L2_SLICED_CAPTION_525;
- }
- fmt->fmt.sliced.service_set =
- (state->vps_enable ? V4L2_SLICED_VPS : 0) |
- (state->wss_enable ? V4L2_SLICED_WSS_625 : 0) |
- (state->cc_enable ? V4L2_SLICED_CAPTION_525 : 0);
- break;
+ if (state->video_enable == enable)
+ return 0;
+ return saa7127_set_video_enable(sd, enable);
+}
- case VIDIOC_LOG_STATUS:
- v4l_info(client, "Standard: %s\n", (state->std & V4L2_STD_525_60) ? "60 Hz" : "50 Hz");
- v4l_info(client, "Input: %s\n", state->input_type ? "color bars" : "normal");
- v4l_info(client, "Output: %s\n", state->video_enable ?
- output_strs[state->output_type] : "disabled");
- v4l_info(client, "WSS: %s\n", state->wss_enable ?
- wss_strs[state->wss_mode] : "disabled");
- v4l_info(client, "VPS: %s\n", state->vps_enable ? "enabled" : "disabled");
- v4l_info(client, "CC: %s\n", state->cc_enable ? "enabled" : "disabled");
- break;
+static int saa7127_g_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
+{
+ struct saa7127_state *state = to_state(sd);
-#ifdef CONFIG_VIDEO_ADV_DEBUG
- case VIDIOC_DBG_G_REGISTER:
- case VIDIOC_DBG_S_REGISTER:
- {
- struct v4l2_register *reg = arg;
-
- if (!v4l2_chip_match_i2c_client(client,
- reg->match_type, reg->match_chip))
- return -EINVAL;
- if (!capable(CAP_SYS_ADMIN))
- return -EPERM;
- if (cmd == VIDIOC_DBG_G_REGISTER)
- reg->val = saa7127_read(client, reg->reg & 0xff);
- else
- saa7127_write(client, reg->reg & 0xff, reg->val & 0xff);
- break;
- }
-#endif
+ if (fmt->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE)
+ return -EINVAL;
- case VIDIOC_INT_S_VBI_DATA:
- {
- struct v4l2_sliced_vbi_data *data = arg;
-
- switch (data->id) {
- case V4L2_SLICED_WSS_625:
- return saa7127_set_wss(client, data);
- case V4L2_SLICED_VPS:
- return saa7127_set_vps(client, data);
- case V4L2_SLICED_CAPTION_525:
- if (data->field == 0)
- return saa7127_set_cc(client, data);
- return saa7127_set_xds(client, data);
- default:
- return -EINVAL;
- }
- break;
+ memset(&fmt->fmt.sliced, 0, sizeof(fmt->fmt.sliced));
+ if (state->vps_enable)
+ fmt->fmt.sliced.service_lines[0][16] = V4L2_SLICED_VPS;
+ if (state->wss_enable)
+ fmt->fmt.sliced.service_lines[0][23] = V4L2_SLICED_WSS_625;
+ if (state->cc_enable) {
+ fmt->fmt.sliced.service_lines[0][21] = V4L2_SLICED_CAPTION_525;
+ fmt->fmt.sliced.service_lines[1][21] = V4L2_SLICED_CAPTION_525;
}
+ fmt->fmt.sliced.service_set =
+ (state->vps_enable ? V4L2_SLICED_VPS : 0) |
+ (state->wss_enable ? V4L2_SLICED_WSS_625 : 0) |
+ (state->cc_enable ? V4L2_SLICED_CAPTION_525 : 0);
+ return 0;
+}
- case VIDIOC_G_CHIP_IDENT:
- return v4l2_chip_ident_i2c_client(client, arg, state->ident, 0);
-
+static int saa7127_s_vbi_data(struct v4l2_subdev *sd, const struct v4l2_sliced_vbi_data *data)
+{
+ switch (data->id) {
+ case V4L2_SLICED_WSS_625:
+ return saa7127_set_wss(sd, data);
+ case V4L2_SLICED_VPS:
+ return saa7127_set_vps(sd, data);
+ case V4L2_SLICED_CAPTION_525:
+ if (data->field == 0)
+ return saa7127_set_cc(sd, data);
+ return saa7127_set_xds(sd, data);
default:
return -EINVAL;
}
return 0;
}
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int saa7127_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+ if (!v4l2_chip_match_i2c_client(client, ®->match))
+ return -EINVAL;
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+ reg->val = saa7127_read(sd, reg->reg & 0xff);
+ reg->size = 1;
+ return 0;
+}
+
+static int saa7127_s_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+ if (!v4l2_chip_match_i2c_client(client, ®->match))
+ return -EINVAL;
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+ saa7127_write(sd, reg->reg & 0xff, reg->val & 0xff);
+ return 0;
+}
+#endif
+
+static int saa7127_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip)
+{
+ struct saa7127_state *state = to_state(sd);
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+ return v4l2_chip_ident_i2c_client(client, chip, state->ident, 0);
+}
+
+static int saa7127_log_status(struct v4l2_subdev *sd)
+{
+ struct saa7127_state *state = to_state(sd);
+
+ v4l2_info(sd, "Standard: %s\n", (state->std & V4L2_STD_525_60) ? "60 Hz" : "50 Hz");
+ v4l2_info(sd, "Input: %s\n", state->input_type ? "color bars" : "normal");
+ v4l2_info(sd, "Output: %s\n", state->video_enable ?
+ output_strs[state->output_type] : "disabled");
+ v4l2_info(sd, "WSS: %s\n", state->wss_enable ?
+ wss_strs[state->wss_mode] : "disabled");
+ v4l2_info(sd, "VPS: %s\n", state->vps_enable ? "enabled" : "disabled");
+ v4l2_info(sd, "CC: %s\n", state->cc_enable ? "enabled" : "disabled");
+ return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+static const struct v4l2_subdev_core_ops saa7127_core_ops = {
+ .log_status = saa7127_log_status,
+ .g_chip_ident = saa7127_g_chip_ident,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+ .g_register = saa7127_g_register,
+ .s_register = saa7127_s_register,
+#endif
+};
+
+static const struct v4l2_subdev_video_ops saa7127_video_ops = {
+ .s_vbi_data = saa7127_s_vbi_data,
+ .g_fmt = saa7127_g_fmt,
+ .s_std_output = saa7127_s_std_output,
+ .s_routing = saa7127_s_routing,
+ .s_stream = saa7127_s_stream,
+};
+
+static const struct v4l2_subdev_ops saa7127_ops = {
+ .core = &saa7127_core_ops,
+ .video = &saa7127_video_ops,
+};
+
/* ----------------------------------------------------------------------- */
static int saa7127_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct saa7127_state *state;
+ struct v4l2_subdev *sd;
struct v4l2_sliced_vbi_data vbi = { 0, 0, 0, 0 }; /* set to disabled */
/* Check if the adapter supports the needed features */
v4l_dbg(1, debug, client, "detecting saa7127 client on address 0x%x\n",
client->addr << 1);
+ state = kzalloc(sizeof(struct saa7127_state), GFP_KERNEL);
+ if (state == NULL)
+ return -ENOMEM;
+
+ sd = &state->sd;
+ v4l2_i2c_subdev_init(sd, client, &saa7127_ops);
+
/* First test register 0: Bits 5-7 are a version ID (should be 0),
and bit 2 should also be 0.
This is rather general, so the second test is more specific and
looks at the 'ending point of burst in clock cycles' which is
0x1d after a reset and not expected to ever change. */
- if ((saa7127_read(client, 0) & 0xe4) != 0 ||
- (saa7127_read(client, 0x29) & 0x3f) != 0x1d) {
- v4l_dbg(1, debug, client, "saa7127 not found\n");
+ if ((saa7127_read(sd, 0) & 0xe4) != 0 ||
+ (saa7127_read(sd, 0x29) & 0x3f) != 0x1d) {
+ v4l2_dbg(1, debug, sd, "saa7127 not found\n");
+ kfree(state);
return -ENODEV;
}
- state = kzalloc(sizeof(struct saa7127_state), GFP_KERNEL);
-
- if (state == NULL)
- return -ENOMEM;
-
- i2c_set_clientdata(client, state);
-
- /* Configure Encoder */
-
- v4l_dbg(1, debug, client, "Configuring encoder\n");
- saa7127_write_inittab(client, saa7127_init_config_common);
- saa7127_set_std(client, V4L2_STD_NTSC);
- saa7127_set_output_type(client, SAA7127_OUTPUT_TYPE_BOTH);
- saa7127_set_vps(client, &vbi);
- saa7127_set_wss(client, &vbi);
- saa7127_set_cc(client, &vbi);
- saa7127_set_xds(client, &vbi);
- if (test_image == 1)
- /* The Encoder has an internal Colorbar generator */
- /* This can be used for debugging */
- saa7127_set_input_type(client, SAA7127_INPUT_TYPE_TEST_IMAGE);
- else
- saa7127_set_input_type(client, SAA7127_INPUT_TYPE_NORMAL);
- saa7127_set_video_enable(client, 1);
if (id->driver_data) { /* Chip type is already known */
state->ident = id->driver_data;
int read_result;
/* Detect if it's an saa7129 */
- read_result = saa7127_read(client, SAA7129_REG_FADE_KEY_COL2);
- saa7127_write(client, SAA7129_REG_FADE_KEY_COL2, 0xaa);
- if (saa7127_read(client, SAA7129_REG_FADE_KEY_COL2) == 0xaa) {
- saa7127_write(client, SAA7129_REG_FADE_KEY_COL2,
+ read_result = saa7127_read(sd, SAA7129_REG_FADE_KEY_COL2);
+ saa7127_write(sd, SAA7129_REG_FADE_KEY_COL2, 0xaa);
+ if (saa7127_read(sd, SAA7129_REG_FADE_KEY_COL2) == 0xaa) {
+ saa7127_write(sd, SAA7129_REG_FADE_KEY_COL2,
read_result);
state->ident = V4L2_IDENT_SAA7129;
strlcpy(client->name, "saa7129", I2C_NAME_SIZE);
}
}
- v4l_info(client, "%s found @ 0x%x (%s)\n", client->name,
+ v4l2_info(sd, "%s found @ 0x%x (%s)\n", client->name,
client->addr << 1, client->adapter->name);
+
+ v4l2_dbg(1, debug, sd, "Configuring encoder\n");
+ saa7127_write_inittab(sd, saa7127_init_config_common);
+ saa7127_set_std(sd, V4L2_STD_NTSC);
+ saa7127_set_output_type(sd, SAA7127_OUTPUT_TYPE_BOTH);
+ saa7127_set_vps(sd, &vbi);
+ saa7127_set_wss(sd, &vbi);
+ saa7127_set_cc(sd, &vbi);
+ saa7127_set_xds(sd, &vbi);
+ if (test_image == 1)
+ /* The Encoder has an internal Colorbar generator */
+ /* This can be used for debugging */
+ saa7127_set_input_type(sd, SAA7127_INPUT_TYPE_TEST_IMAGE);
+ else
+ saa7127_set_input_type(sd, SAA7127_INPUT_TYPE_NORMAL);
+ saa7127_set_video_enable(sd, 1);
+
if (state->ident == V4L2_IDENT_SAA7129)
- saa7127_write_inittab(client, saa7129_init_config_extra);
+ saa7127_write_inittab(sd, saa7129_init_config_extra);
return 0;
}
static int saa7127_remove(struct i2c_client *client)
{
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+
+ v4l2_device_unregister_subdev(sd);
/* Turn off TV output */
- saa7127_set_video_enable(client, 0);
- kfree(i2c_get_clientdata(client));
+ saa7127_set_video_enable(sd, 0);
+ kfree(to_state(sd));
return 0;
}
static struct v4l2_i2c_driver_data v4l2_i2c_data = {
.name = "saa7127",
- .driverid = I2C_DRIVERID_SAA7127,
- .command = saa7127_command,
.probe = saa7127_probe,
.remove = saa7127_remove,
.id_table = saa7127_id,
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff