#include <linux/firmware.h>
#include <linux/videodev2.h>
#include <media/v4l2-common.h>
+#include <media/tuner.h>
#include "pvrusb2.h"
#include "pvrusb2-std.h"
#include "pvrusb2-util.h"
#include "pvrusb2-encoder.h"
#include "pvrusb2-debug.h"
#include "pvrusb2-fx2-cmd.h"
+#include "pvrusb2-wm8775.h"
+#include "pvrusb2-video-v4l.h"
+#include "pvrusb2-cx2584x-v4l.h"
+#include "pvrusb2-audio.h"
#define TV_MIN_FREQ 55250000L
#define TV_MAX_FREQ 850000000L
/* size of a firmware chunk */
#define FIRMWARE_CHUNK_SIZE 0x2000
+typedef void (*pvr2_subdev_update_func)(struct pvr2_hdw *,
+ struct v4l2_subdev *);
+
+static const pvr2_subdev_update_func pvr2_module_update_functions[] = {
+ [PVR2_CLIENT_ID_WM8775] = pvr2_wm8775_subdev_update,
+ [PVR2_CLIENT_ID_SAA7115] = pvr2_saa7115_subdev_update,
+ [PVR2_CLIENT_ID_MSP3400] = pvr2_msp3400_subdev_update,
+ [PVR2_CLIENT_ID_CX25840] = pvr2_cx25840_subdev_update,
+};
+
static const char *module_names[] = {
[PVR2_CLIENT_ID_MSP3400] = "msp3400",
[PVR2_CLIENT_ID_CX25840] = "cx25840",
[PVR2_CLIENT_ID_SAA7115] = "saa7115",
[PVR2_CLIENT_ID_TUNER] = "tuner",
[PVR2_CLIENT_ID_CS53132A] = "cs53132a",
+ [PVR2_CLIENT_ID_WM8775] = "wm8775",
};
static const unsigned char *module_i2c_addresses[] = {
[PVR2_CLIENT_ID_TUNER] = "\x60\x61\x62\x63",
+ [PVR2_CLIENT_ID_WM8775] = "\x1b",
+ [PVR2_CLIENT_ID_CX25840] = "\x44",
};
static int pvr2_decoder_enable(struct pvr2_hdw *hdw,int enablefl)
{
- if (!hdw->decoder_ctrl) {
- if (!hdw->flag_decoder_missed) {
- pvr2_trace(PVR2_TRACE_ERROR_LEGS,
- "WARNING: No decoder present");
- hdw->flag_decoder_missed = !0;
- trace_stbit("flag_decoder_missed",
- hdw->flag_decoder_missed);
- }
- return -EIO;
+ if (hdw->decoder_ctrl) {
+ hdw->decoder_ctrl->enable(hdw->decoder_ctrl->ctxt, enablefl);
+ return 0;
}
- hdw->decoder_ctrl->enable(hdw->decoder_ctrl->ctxt,enablefl);
- return 0;
+ /* Even though we really only care about the video decoder chip at
+ this point, we'll broadcast stream on/off to all sub-devices
+ anyway, just in case somebody else wants to hear the
+ command... */
+ pvr2_trace(PVR2_TRACE_CHIPS, "subdev v4l2 stream=%s",
+ (enablefl ? "on" : "off"));
+ v4l2_device_call_all(&hdw->v4l2_dev, 0, video, s_stream, enablefl);
+ if (hdw->decoder_client_id) {
+ /* We get here if the encoder has been noticed. Otherwise
+ we'll issue a warning to the user (which should
+ normally never happen). */
+ return 0;
+ }
+ if (!hdw->flag_decoder_missed) {
+ pvr2_trace(PVR2_TRACE_ERROR_LEGS,
+ "WARNING: No decoder present");
+ hdw->flag_decoder_missed = !0;
+ trace_stbit("flag_decoder_missed",
+ hdw->flag_decoder_missed);
+ }
+ return -EIO;
}
unsigned short *dst, const unsigned char *src,
unsigned int dst_max)
{
- unsigned int cnt;
+ unsigned int cnt = 0;
if (!src) return 0;
while (src[cnt] && (cnt + 1) < dst_max) {
dst[cnt] = src[cnt];
}
-static void pvr2_hdw_load_subdev(struct pvr2_hdw *hdw,
- const struct pvr2_device_client_desc *cd)
+static int pvr2_hdw_load_subdev(struct pvr2_hdw *hdw,
+ const struct pvr2_device_client_desc *cd)
{
const char *fname;
unsigned char mid;
fname = (mid < ARRAY_SIZE(module_names)) ? module_names[mid] : NULL;
if (!fname) {
pvr2_trace(PVR2_TRACE_ERROR_LEGS,
- "Module ID %u for device %s is unknown"
- " (this is probably a bad thing...)",
+ "Module ID %u for device %s has no name",
mid,
hdw->hdw_desc->description);
- return;
+ return -EINVAL;
}
+ pvr2_trace(PVR2_TRACE_INIT,
+ "Module ID %u (%s) for device %s being loaded...",
+ mid, fname,
+ hdw->hdw_desc->description);
i2ccnt = pvr2_copy_i2c_addr_list(i2caddr, cd->i2c_address_list,
ARRAY_SIZE(i2caddr));
/* Second chance: Try default i2c address list */
i2ccnt = pvr2_copy_i2c_addr_list(i2caddr, p,
ARRAY_SIZE(i2caddr));
+ if (i2ccnt) {
+ pvr2_trace(PVR2_TRACE_INIT,
+ "Module ID %u:"
+ " Using default i2c address list",
+ mid);
+ }
}
if (!i2ccnt) {
pvr2_trace(PVR2_TRACE_ERROR_LEGS,
- "Module ID %u for device %s:"
- " No i2c addresses"
- " (this is probably a bad thing...)",
- mid, hdw->hdw_desc->description);
- return;
+ "Module ID %u (%s) for device %s:"
+ " No i2c addresses",
+ mid, fname, hdw->hdw_desc->description);
+ return -EINVAL;
}
/* Note how the 2nd and 3rd arguments are the same for both
* and every other place where I can find examples of this, the
* "chipid" appears to just be the module name again. So here we
* just do the same thing. */
+ hdw->i2c_adap.class = 0;
if (i2ccnt == 1) {
+ pvr2_trace(PVR2_TRACE_INIT,
+ "Module ID %u:"
+ " Setting up with specified i2c address 0x%x",
+ mid, i2caddr[0]);
sd = v4l2_i2c_new_subdev(&hdw->i2c_adap,
fname, fname,
i2caddr[0]);
} else {
+ pvr2_trace(PVR2_TRACE_INIT,
+ "Module ID %u:"
+ " Setting up with address probe list",
+ mid);
sd = v4l2_i2c_new_probed_subdev(&hdw->i2c_adap,
fname, fname,
i2caddr);
}
+ hdw->i2c_adap.class = I2C_CLASS_TV_ANALOG;
if (!sd) {
pvr2_trace(PVR2_TRACE_ERROR_LEGS,
- "Module ID %u for device %s failed to load"
- " (this is probably a bad thing...)",
- mid, hdw->hdw_desc->description);
- return;
+ "Module ID %u (%s) for device %s failed to load",
+ mid, fname, hdw->hdw_desc->description);
+ return -EIO;
}
/* Tag this sub-device instance with the module ID we know about.
aid, in normal situations there's no reason for both mechanisms
to be enabled. */
pvr2_i2c_untrack_subdev(hdw, sd);
- pvr2_trace(PVR2_TRACE_INIT, "Attached sub-driver %s", fname);
-
+ pvr2_trace(PVR2_TRACE_INFO, "Attached sub-driver %s", fname);
+
+
+ /* client-specific setup... */
+ switch (mid) {
+ case PVR2_CLIENT_ID_CX25840:
+ hdw->decoder_client_id = mid;
+ {
+ /*
+ Mike Isely <isely@pobox.com> 19-Nov-2006 - This
+ bit of nuttiness for cx25840 causes that module
+ to correctly set up its video scaling. This is
+ really a problem in the cx25840 module itself,
+ but we work around it here. The problem has not
+ been seen in ivtv because there VBI is supported
+ and set up. We don't do VBI here (at least not
+ yet) and thus we never attempted to even set it
+ up.
+ */
+ struct v4l2_format fmt;
+ pvr2_trace(PVR2_TRACE_INIT,
+ "Module ID %u:"
+ " Executing cx25840 VBI hack",
+ mid);
+ memset(&fmt, 0, sizeof(fmt));
+ fmt.type = V4L2_BUF_TYPE_SLICED_VBI_CAPTURE;
+ v4l2_device_call_all(&hdw->v4l2_dev, mid,
+ video, s_fmt, &fmt);
+ }
+ break;
+ case PVR2_CLIENT_ID_SAA7115:
+ hdw->decoder_client_id = mid;
+ break;
+ default: break;
+ }
+ return 0;
}
unsigned int idx;
const struct pvr2_string_table *cm;
const struct pvr2_device_client_table *ct;
+ int okFl = !0;
cm = &hdw->hdw_desc->client_modules;
for (idx = 0; idx < cm->cnt; idx++) {
ct = &hdw->hdw_desc->client_table;
for (idx = 0; idx < ct->cnt; idx++) {
- pvr2_hdw_load_subdev(hdw,&ct->lst[idx]);
+ if (pvr2_hdw_load_subdev(hdw, &ct->lst[idx]) < 0) okFl = 0;
}
+ if (!okFl) pvr2_hdw_render_useless(hdw);
}
if (!pvr2_hdw_dev_ok(hdw)) return;
+ hdw->force_dirty = !0;
+
if (!hdw->hdw_desc->flag_no_powerup) {
pvr2_hdw_cmd_powerup(hdw);
if (!pvr2_hdw_dev_ok(hdw)) return;
if (!pvr2_hdw_dev_ok(hdw)) return;
pvr2_hdw_load_modules(hdw);
+ if (!pvr2_hdw_dev_ok(hdw)) return;
for (idx = 0; idx < CTRLDEF_COUNT; idx++) {
cptr = hdw->controls + idx;
}
pvr2_i2c_core_check_stale(hdw);
- hdw->tuner_updated = 0;
if (!pvr2_hdw_dev_ok(hdw)) return;
}
+static void pvr2_subdev_set_control(struct pvr2_hdw *hdw, int id,
+ const char *name, int val)
+{
+ struct v4l2_control ctrl;
+ pvr2_trace(PVR2_TRACE_CHIPS, "subdev v4l2 %s=%d", name, val);
+ memset(&ctrl, 0, sizeof(ctrl));
+ ctrl.id = id;
+ ctrl.value = val;
+ v4l2_device_call_all(&hdw->v4l2_dev, 0, core, s_ctrl, &ctrl);
+}
+
+#define PVR2_SUBDEV_SET_CONTROL(hdw, id, lab) \
+ if ((hdw)->lab##_dirty || (hdw)->force_dirty) { \
+ pvr2_subdev_set_control(hdw, id, #lab, (hdw)->lab##_val); \
+ }
+
/* Execute whatever commands are required to update the state of all the
- sub-devices so that it matches our current control values. */
+ sub-devices so that they match our current control values. */
static void pvr2_subdev_update(struct pvr2_hdw *hdw)
{
- /* ????? */
+ struct v4l2_subdev *sd;
+ unsigned int id;
+ pvr2_subdev_update_func fp;
+
+ pvr2_trace(PVR2_TRACE_CHIPS, "subdev update...");
+
+ if (hdw->tuner_updated || hdw->force_dirty) {
+ struct tuner_setup setup;
+ pvr2_trace(PVR2_TRACE_CHIPS, "subdev tuner set_type(%d)",
+ hdw->tuner_type);
+ if (((int)(hdw->tuner_type)) >= 0) {
+ setup.addr = ADDR_UNSET;
+ setup.type = hdw->tuner_type;
+ setup.mode_mask = T_RADIO | T_ANALOG_TV;
+ v4l2_device_call_all(&hdw->v4l2_dev, 0,
+ tuner, s_type_addr, &setup);
+ }
+ }
+
+ if (hdw->input_dirty || hdw->std_dirty || hdw->force_dirty) {
+ pvr2_trace(PVR2_TRACE_CHIPS, "subdev v4l2 set_standard");
+ if (hdw->input_val == PVR2_CVAL_INPUT_RADIO) {
+ v4l2_device_call_all(&hdw->v4l2_dev, 0,
+ tuner, s_radio);
+ } else {
+ v4l2_std_id vs;
+ vs = hdw->std_mask_cur;
+ v4l2_device_call_all(&hdw->v4l2_dev, 0,
+ tuner, s_std, vs);
+ }
+ hdw->tuner_signal_stale = !0;
+ hdw->cropcap_stale = !0;
+ }
+
+ PVR2_SUBDEV_SET_CONTROL(hdw, V4L2_CID_BRIGHTNESS, brightness);
+ PVR2_SUBDEV_SET_CONTROL(hdw, V4L2_CID_CONTRAST, contrast);
+ PVR2_SUBDEV_SET_CONTROL(hdw, V4L2_CID_SATURATION, saturation);
+ PVR2_SUBDEV_SET_CONTROL(hdw, V4L2_CID_HUE, hue);
+ PVR2_SUBDEV_SET_CONTROL(hdw, V4L2_CID_AUDIO_MUTE, mute);
+ PVR2_SUBDEV_SET_CONTROL(hdw, V4L2_CID_AUDIO_VOLUME, volume);
+ PVR2_SUBDEV_SET_CONTROL(hdw, V4L2_CID_AUDIO_BALANCE, balance);
+ PVR2_SUBDEV_SET_CONTROL(hdw, V4L2_CID_AUDIO_BASS, bass);
+ PVR2_SUBDEV_SET_CONTROL(hdw, V4L2_CID_AUDIO_TREBLE, treble);
+
+ if (hdw->input_dirty || hdw->audiomode_dirty || hdw->force_dirty) {
+ struct v4l2_tuner vt;
+ memset(&vt, 0, sizeof(vt));
+ vt.audmode = hdw->audiomode_val;
+ v4l2_device_call_all(&hdw->v4l2_dev, 0, tuner, s_tuner, &vt);
+ }
+
+ if (hdw->freqDirty || hdw->force_dirty) {
+ unsigned long fv;
+ struct v4l2_frequency freq;
+ fv = pvr2_hdw_get_cur_freq(hdw);
+ pvr2_trace(PVR2_TRACE_CHIPS, "subdev v4l2 set_freq(%lu)", fv);
+ if (hdw->tuner_signal_stale) pvr2_hdw_status_poll(hdw);
+ memset(&freq, 0, sizeof(freq));
+ if (hdw->tuner_signal_info.capability & V4L2_TUNER_CAP_LOW) {
+ /* ((fv * 1000) / 62500) */
+ freq.frequency = (fv * 2) / 125;
+ } else {
+ freq.frequency = fv / 62500;
+ }
+ /* tuner-core currently doesn't seem to care about this, but
+ let's set it anyway for completeness. */
+ if (hdw->input_val == PVR2_CVAL_INPUT_RADIO) {
+ freq.type = V4L2_TUNER_RADIO;
+ } else {
+ freq.type = V4L2_TUNER_ANALOG_TV;
+ }
+ freq.tuner = 0;
+ v4l2_device_call_all(&hdw->v4l2_dev, 0, tuner,
+ s_frequency, &freq);
+ }
+
+ if (hdw->res_hor_dirty || hdw->res_ver_dirty || hdw->force_dirty) {
+ struct v4l2_format fmt;
+ memset(&fmt, 0, sizeof(fmt));
+ fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ fmt.fmt.pix.width = hdw->res_hor_val;
+ fmt.fmt.pix.height = hdw->res_ver_val;
+ pvr2_trace(PVR2_TRACE_CHIPS,"subdev v4l2 set_size(%dx%d)",
+ fmt.fmt.pix.width, fmt.fmt.pix.height);
+ v4l2_device_call_all(&hdw->v4l2_dev, 0, video, s_fmt, &fmt);
+ }
+
+ if (hdw->srate_dirty || hdw->force_dirty) {
+ u32 val;
+ pvr2_trace(PVR2_TRACE_CHIPS, "subdev v4l2 set_audio %d",
+ hdw->srate_val);
+ switch (hdw->srate_val) {
+ default:
+ case V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000:
+ val = 48000;
+ break;
+ case V4L2_MPEG_AUDIO_SAMPLING_FREQ_44100:
+ val = 44100;
+ break;
+ case V4L2_MPEG_AUDIO_SAMPLING_FREQ_32000:
+ val = 32000;
+ break;
+ }
+ v4l2_device_call_all(&hdw->v4l2_dev, 0,
+ audio, s_clock_freq, val);
+ }
+
+ /* Unable to set crop parameters; there is apparently no equivalent
+ for VIDIOC_S_CROP */
+
+ v4l2_device_for_each_subdev(sd, &hdw->v4l2_dev) {
+ id = sd->grp_id;
+ if (id >= ARRAY_SIZE(pvr2_module_update_functions)) continue;
+ fp = pvr2_module_update_functions[id];
+ if (!fp) continue;
+ (*fp)(hdw, sd);
+ }
+
+ if (hdw->tuner_signal_stale || hdw->cropcap_stale) {
+ pvr2_hdw_status_poll(hdw);
+ }
}
unsigned int idx;
struct pvr2_ctrl *cptr;
int value;
- int commit_flag = 0;
+ int commit_flag = hdw->force_dirty;
char buf[100];
unsigned int bcnt,ccnt;
}
}
+ /* Check and update state for all sub-devices. */
+ pvr2_subdev_update(hdw);
+
+ hdw->tuner_updated = 0;
+ hdw->force_dirty = 0;
for (idx = 0; idx < hdw->control_cnt; idx++) {
cptr = hdw->controls + idx;
if (!cptr->info->clear_dirty) continue;
cptr->info->clear_dirty(cptr);
}
- /* Check and update state for all sub-devices. */
- pvr2_subdev_update(hdw);
-
/* Now execute i2c core update */
pvr2_i2c_core_sync(hdw);
pvr2_i2c_core_check_stale(hdw);
pvr2_i2c_core_sync(hdw);
hdw->log_requested = 0;
+ v4l2_device_call_all(&hdw->v4l2_dev, 0, core, log_status);
pvr2_trace(PVR2_TRACE_INFO,"cx2341x config:");
cx2341x_log_status(&hdw->enc_ctl_state, "pvrusb2");
pvr2_hdw_state_log_state(hdw);
int pvr2_hdw_cmd_decoder_reset(struct pvr2_hdw *hdw)
{
- if (!hdw->decoder_ctrl) {
- pvr2_trace(PVR2_TRACE_INIT,
- "Unable to reset decoder: nothing attached");
- return -ENOTTY;
+ pvr2_trace(PVR2_TRACE_INIT,
+ "Requesting decoder reset");
+ if (hdw->decoder_ctrl) {
+ if (!hdw->decoder_ctrl->force_reset) {
+ pvr2_trace(PVR2_TRACE_INIT,
+ "Unable to reset decoder: not implemented");
+ return -ENOTTY;
+ }
+ hdw->decoder_ctrl->force_reset(hdw->decoder_ctrl->ctxt);
+ return 0;
+ } else {
}
-
- if (!hdw->decoder_ctrl->force_reset) {
- pvr2_trace(PVR2_TRACE_INIT,
- "Unable to reset decoder: not implemented");
- return -ENOTTY;
+ if (hdw->decoder_client_id) {
+ v4l2_device_call_all(&hdw->v4l2_dev, hdw->decoder_client_id,
+ core, reset, 0);
+ return 0;
}
-
pvr2_trace(PVR2_TRACE_INIT,
- "Requesting decoder reset");
- hdw->decoder_ctrl->force_reset(hdw->decoder_ctrl->ctxt);
- return 0;
+ "Unable to reset decoder: nothing attached");
+ return -ENOTTY;
}
stats.buffers_processed,
stats.buffers_failed);
}
+ case 6: {
+ struct v4l2_subdev *sd;
+ unsigned int tcnt = 0;
+ unsigned int ccnt;
+ const char *p;
+ unsigned int id;
+ ccnt = scnprintf(buf,
+ acnt,
+ "Associated v4l2_subdev drivers:");
+ tcnt += ccnt;
+ v4l2_device_for_each_subdev(sd, &hdw->v4l2_dev) {
+ id = sd->grp_id;
+ p = NULL;
+ if (id < ARRAY_SIZE(module_names)) {
+ p = module_names[id];
+ }
+ if (p) {
+ ccnt = scnprintf(buf + tcnt,
+ acnt - tcnt,
+ " %s", p);
+ } else {
+ ccnt = scnprintf(buf + tcnt,
+ acnt - tcnt,
+ " (unknown id=%u)", id);
+ }
+ tcnt += ccnt;
+ }
+ return tcnt;
+ }
default: break;
}
return 0;
void pvr2_hdw_status_poll(struct pvr2_hdw *hdw)
{
+ struct v4l2_tuner *vtp = &hdw->tuner_signal_info;
+ memset(vtp, 0, sizeof(*vtp));
+ hdw->tuner_signal_stale = 0;
pvr2_i2c_core_status_poll(hdw);
+ /* Note: There apparently is no replacement for VIDIOC_CROPCAP
+ using v4l2-subdev - therefore we can't support that AT ALL right
+ now. (Of course, no sub-drivers seem to implement it either.
+ But now it's a a chicken and egg problem...) */
+ v4l2_device_call_all(&hdw->v4l2_dev, 0, tuner, g_tuner,
+ &hdw->tuner_signal_info);
+ pvr2_trace(PVR2_TRACE_CHIPS, "subdev status poll"
+ " type=%u strength=%u audio=0x%x cap=0x%x"
+ " low=%u hi=%u",
+ vtp->type,
+ vtp->signal, vtp->rxsubchans, vtp->capability,
+ vtp->rangelow, vtp->rangehigh);
+
+ /* We have to do this to avoid getting into constant polling if
+ there's nobody to answer a poll of cropcap info. */
+ hdw->cropcap_stale = 0;
}
req.match = *match;
req.reg = reg_id;
if (setFl) req.val = *val_ptr;
- mutex_lock(&hdw->i2c_list_lock); do {
+ /* It would be nice to know if a sub-device answered the request */
+ v4l2_device_call_all(&hdw->v4l2_dev, 0, core, g_register, &req);
+ if (!setFl) *val_ptr = req.val;
+ if (!okFl) mutex_lock(&hdw->i2c_list_lock); do {
list_for_each_entry(cp, &hdw->i2c_clients, list) {
if (!v4l2_chip_match_i2c_client(
cp->client,
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff