-
/*
*
* device driver for Conexant 2388x based TV cards
#include <linux/init.h>
#include <linux/list.h>
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/kmod.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
#include <linux/delay.h>
#include <linux/kthread.h>
#include <asm/div64.h>
MODULE_PARM_DESC(vbi_nr,"vbi device numbers");
MODULE_PARM_DESC(radio_nr,"radio device numbers");
-static unsigned int video_debug = 0;
+static unsigned int video_debug;
module_param(video_debug,int,0644);
MODULE_PARM_DESC(video_debug,"enable debug messages [video]");
-static unsigned int irq_debug = 0;
+static unsigned int irq_debug;
module_param(irq_debug,int,0644);
MODULE_PARM_DESC(irq_debug,"enable debug messages [IRQ handler]");
.mask = 0x00ff,
.shift = 0,
},{
+ .v = {
+ .id = V4L2_CID_CHROMA_AGC,
+ .name = "Chroma AGC",
+ .minimum = 0,
+ .maximum = 1,
+ .default_value = 0x1,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ },
+ .reg = MO_INPUT_FORMAT,
+ .mask = 1 << 10,
+ .shift = 10,
+ }, {
+ .v = {
+ .id = V4L2_CID_COLOR_KILLER,
+ .name = "Color killer",
+ .minimum = 0,
+ .maximum = 1,
+ .default_value = 0x0,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ },
+ .reg = MO_INPUT_FORMAT,
+ .mask = 1 << 9,
+ .shift = 9,
+ }, {
/* --- audio --- */
.v = {
.id = V4L2_CID_AUDIO_MUTE,
V4L2_CID_AUDIO_VOLUME,
V4L2_CID_AUDIO_BALANCE,
V4L2_CID_AUDIO_MUTE,
+ V4L2_CID_CHROMA_AGC,
+ V4L2_CID_COLOR_KILLER,
0
};
EXPORT_SYMBOL(cx88_user_ctrls);
NULL
};
-int cx8800_ctrl_query(struct v4l2_queryctrl *qctrl)
+int cx8800_ctrl_query(struct cx88_core *core, struct v4l2_queryctrl *qctrl)
{
int i;
return 0;
}
*qctrl = cx8800_ctls[i].v;
+ /* Report chroma AGC as inactive when SECAM is selected */
+ if (cx8800_ctls[i].v.id == V4L2_CID_CHROMA_AGC &&
+ core->tvnorm & V4L2_STD_SECAM)
+ qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE;
+
return 0;
}
EXPORT_SYMBOL(cx8800_ctrl_query);
/* struct cx88_core *core = dev->core; */
dprintk(1,"video_mux: %d [vmux=%d,gpio=0x%x,0x%x,0x%x,0x%x]\n",
- input, INPUT(input)->vmux,
- INPUT(input)->gpio0,INPUT(input)->gpio1,
- INPUT(input)->gpio2,INPUT(input)->gpio3);
+ input, INPUT(input).vmux,
+ INPUT(input).gpio0,INPUT(input).gpio1,
+ INPUT(input).gpio2,INPUT(input).gpio3);
core->input = input;
- cx_andor(MO_INPUT_FORMAT, 0x03 << 14, INPUT(input)->vmux << 14);
- cx_write(MO_GP3_IO, INPUT(input)->gpio3);
- cx_write(MO_GP0_IO, INPUT(input)->gpio0);
- cx_write(MO_GP1_IO, INPUT(input)->gpio1);
- cx_write(MO_GP2_IO, INPUT(input)->gpio2);
+ cx_andor(MO_INPUT_FORMAT, 0x03 << 14, INPUT(input).vmux << 14);
+ cx_write(MO_GP3_IO, INPUT(input).gpio3);
+ cx_write(MO_GP0_IO, INPUT(input).gpio0);
+ cx_write(MO_GP1_IO, INPUT(input).gpio1);
+ cx_write(MO_GP2_IO, INPUT(input).gpio2);
- switch (INPUT(input)->type) {
+ switch (INPUT(input).type) {
case CX88_VMUX_SVIDEO:
cx_set(MO_AFECFG_IO, 0x00000001);
cx_set(MO_INPUT_FORMAT, 0x00010010);
break;
}
- if (cx88_boards[core->board].mpeg & CX88_MPEG_BLACKBIRD) {
- /* sets sound input from external adc */
- if (INPUT(input)->extadc)
+ /* if there are audioroutes defined, we have an external
+ ADC to deal with audio */
+
+ if (INPUT(input).audioroute) {
+
+ /* cx2388's C-ADC is connected to the tuner only.
+ When used with S-Video, that ADC is busy dealing with
+ chroma, so an external must be used for baseband audio */
+
+ if (INPUT(input).type != CX88_VMUX_TELEVISION &&
+ INPUT(input).type != CX88_RADIO) {
+ /* "ADC mode" */
+ cx_write(AUD_I2SCNTL, 0x1);
cx_set(AUD_CTL, EN_I2SIN_ENABLE);
- else
+ } else {
+ /* Normal mode */
+ cx_write(AUD_I2SCNTL, 0x0);
cx_clear(AUD_CTL, EN_I2SIN_ENABLE);
+ }
+
+ /* The wm8775 module has the "2" route hardwired into
+ the initialization. Some boards may use different
+ routes for different inputs. HVR-1300 surely does */
+ if (core->board.audio_chip &&
+ core->board.audio_chip == AUDIO_CHIP_WM8775) {
+ struct v4l2_routing route;
+
+ route.input = INPUT(input).audioroute;
+ cx88_call_i2c_clients(core,
+ VIDIOC_INT_S_AUDIO_ROUTING, &route);
+
+ }
+
}
+
return 0;
}
EXPORT_SYMBOL(cx88_video_mux);
q->count = 1;
/* enable irqs */
- cx_set(MO_PCI_INTMSK, core->pci_irqmask | 0x01);
+ cx_set(MO_PCI_INTMSK, core->pci_irqmask | PCI_INT_VIDINT);
/* Enables corresponding bits at PCI_INT_STAT:
bits 0 to 4: video, audio, transport stream, VIP, Host
cx_clear(VID_CAPTURE_CONTROL,0x06);
/* disable irqs */
- cx_clear(MO_PCI_INTMSK, 0x000001);
+ cx_clear(MO_PCI_INTMSK, PCI_INT_VIDINT);
cx_clear(MO_VID_INTMSK, 0x0f0011);
return 0;
}
{
struct cx88_core *core = dev->core;
struct cx88_buffer *buf, *prev;
- struct list_head *item;
if (!list_empty(&q->active)) {
buf = list_entry(q->active.next, struct cx88_buffer, vb.queue);
dprintk(2,"restart_queue [%p/%d]: restart dma\n",
buf, buf->vb.i);
start_video_dma(dev, q, buf);
- list_for_each(item,&q->active) {
- buf = list_entry(item, struct cx88_buffer, vb.queue);
- buf->count = q->count++;
- }
+ list_for_each_entry(buf, &q->active, vb.queue)
+ buf->count = q->count++;
mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT);
return 0;
}
if (NULL == prev) {
list_move_tail(&buf->vb.queue, &q->active);
start_video_dma(dev, q, buf);
- buf->vb.state = STATE_ACTIVE;
+ buf->vb.state = VIDEOBUF_ACTIVE;
buf->count = q->count++;
mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT);
dprintk(2,"[%p/%d] restart_queue - first active\n",
prev->vb.height == buf->vb.height &&
prev->fmt == buf->fmt) {
list_move_tail(&buf->vb.queue, &q->active);
- buf->vb.state = STATE_ACTIVE;
+ buf->vb.state = VIDEOBUF_ACTIVE;
buf->count = q->count++;
prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma);
dprintk(2,"[%p/%d] restart_queue - move to active\n",
struct cx8800_dev *dev = fh->dev;
struct cx88_core *core = dev->core;
struct cx88_buffer *buf = container_of(vb,struct cx88_buffer,vb);
+ struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb);
int rc, init_buffer = 0;
BUG_ON(NULL == fh->fmt);
init_buffer = 1;
}
- if (STATE_NEEDS_INIT == buf->vb.state) {
+ if (VIDEOBUF_NEEDS_INIT == buf->vb.state) {
init_buffer = 1;
if (0 != (rc = videobuf_iolock(q,&buf->vb,NULL)))
goto fail;
switch (buf->vb.field) {
case V4L2_FIELD_TOP:
cx88_risc_buffer(dev->pci, &buf->risc,
- buf->vb.dma.sglist, 0, UNSET,
+ dma->sglist, 0, UNSET,
buf->bpl, 0, buf->vb.height);
break;
case V4L2_FIELD_BOTTOM:
cx88_risc_buffer(dev->pci, &buf->risc,
- buf->vb.dma.sglist, UNSET, 0,
+ dma->sglist, UNSET, 0,
buf->bpl, 0, buf->vb.height);
break;
case V4L2_FIELD_INTERLACED:
cx88_risc_buffer(dev->pci, &buf->risc,
- buf->vb.dma.sglist, 0, buf->bpl,
+ dma->sglist, 0, buf->bpl,
buf->bpl, buf->bpl,
buf->vb.height >> 1);
break;
case V4L2_FIELD_SEQ_TB:
cx88_risc_buffer(dev->pci, &buf->risc,
- buf->vb.dma.sglist,
+ dma->sglist,
0, buf->bpl * (buf->vb.height >> 1),
buf->bpl, 0,
buf->vb.height >> 1);
break;
case V4L2_FIELD_SEQ_BT:
cx88_risc_buffer(dev->pci, &buf->risc,
- buf->vb.dma.sglist,
+ dma->sglist,
buf->bpl * (buf->vb.height >> 1), 0,
buf->bpl, 0,
buf->vb.height >> 1);
fh->width, fh->height, fh->fmt->depth, fh->fmt->name,
(unsigned long)buf->risc.dma);
- buf->vb.state = STATE_PREPARED;
+ buf->vb.state = VIDEOBUF_PREPARED;
return 0;
fail:
if (!list_empty(&q->queued)) {
list_add_tail(&buf->vb.queue,&q->queued);
- buf->vb.state = STATE_QUEUED;
+ buf->vb.state = VIDEOBUF_QUEUED;
dprintk(2,"[%p/%d] buffer_queue - append to queued\n",
buf, buf->vb.i);
} else if (list_empty(&q->active)) {
list_add_tail(&buf->vb.queue,&q->active);
start_video_dma(dev, q, buf);
- buf->vb.state = STATE_ACTIVE;
+ buf->vb.state = VIDEOBUF_ACTIVE;
buf->count = q->count++;
mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT);
dprintk(2,"[%p/%d] buffer_queue - first active\n",
prev->vb.height == buf->vb.height &&
prev->fmt == buf->fmt) {
list_add_tail(&buf->vb.queue,&q->active);
- buf->vb.state = STATE_ACTIVE;
+ buf->vb.state = VIDEOBUF_ACTIVE;
buf->count = q->count++;
prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma);
dprintk(2,"[%p/%d] buffer_queue - append to active\n",
} else {
list_add_tail(&buf->vb.queue,&q->queued);
- buf->vb.state = STATE_QUEUED;
+ buf->vb.state = VIDEOBUF_QUEUED;
dprintk(2,"[%p/%d] buffer_queue - first queued\n",
buf, buf->vb.i);
}
struct cx8800_dev *h,*dev = NULL;
struct cx88_core *core;
struct cx8800_fh *fh;
- struct list_head *list;
enum v4l2_buf_type type = 0;
int radio = 0;
- list_for_each(list,&cx8800_devlist) {
- h = list_entry(list, struct cx8800_dev, devlist);
+ list_for_each_entry(h, &cx8800_devlist, devlist) {
if (h->video_dev->minor == minor) {
dev = h;
type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
fh->height = 240;
fh->fmt = format_by_fourcc(V4L2_PIX_FMT_BGR24);
- videobuf_queue_init(&fh->vidq, &cx8800_video_qops,
- dev->pci, &dev->slock,
+ videobuf_queue_sg_init(&fh->vidq, &cx8800_video_qops,
+ &dev->pci->dev, &dev->slock,
V4L2_BUF_TYPE_VIDEO_CAPTURE,
V4L2_FIELD_INTERLACED,
sizeof(struct cx88_buffer),
fh);
- videobuf_queue_init(&fh->vbiq, &cx8800_vbi_qops,
- dev->pci, &dev->slock,
+ videobuf_queue_sg_init(&fh->vbiq, &cx8800_vbi_qops,
+ &dev->pci->dev, &dev->slock,
V4L2_BUF_TYPE_VBI_CAPTURE,
V4L2_FIELD_SEQ_TB,
sizeof(struct cx88_buffer),
fh);
if (fh->radio) {
- int board = core->board;
dprintk(1,"video_open: setting radio device\n");
- cx_write(MO_GP3_IO, cx88_boards[board].radio.gpio3);
- cx_write(MO_GP0_IO, cx88_boards[board].radio.gpio0);
- cx_write(MO_GP1_IO, cx88_boards[board].radio.gpio1);
- cx_write(MO_GP2_IO, cx88_boards[board].radio.gpio2);
+ cx_write(MO_GP3_IO, core->board.radio.gpio3);
+ cx_write(MO_GP0_IO, core->board.radio.gpio0);
+ cx_write(MO_GP1_IO, core->board.radio.gpio1);
+ cx_write(MO_GP2_IO, core->board.radio.gpio2);
core->tvaudio = WW_FM;
cx88_set_tvaudio(core);
cx88_set_stereo(core,V4L2_TUNER_MODE_STEREO,1);
return POLLERR;
}
poll_wait(file, &buf->vb.done, wait);
- if (buf->vb.state == STATE_DONE ||
- buf->vb.state == STATE_ERROR)
+ if (buf->vb.state == VIDEOBUF_DONE ||
+ buf->vb.state == VIDEOBUF_ERROR)
return POLLIN|POLLRDNORM;
return 0;
}
/* stop vbi capture */
if (res_check(fh, RESOURCE_VBI)) {
- if (fh->vbiq.streaming)
- videobuf_streamoff(&fh->vbiq);
- if (fh->vbiq.reading)
- videobuf_read_stop(&fh->vbiq);
+ videobuf_stop(&fh->vbiq);
res_free(dev,fh,RESOURCE_VBI);
}
}
mask=0xffff;
break;
+ case V4L2_CID_CHROMA_AGC:
+ /* Do not allow chroma AGC to be enabled for SECAM */
+ value = ((ctl->value - c->off) << c->shift) & c->mask;
+ if (core->tvnorm & V4L2_STD_SECAM && value)
+ return -EINVAL;
+ break;
default:
value = ((ctl->value - c->off) << c->shift) & c->mask;
break;
struct cx88_core *core = dev->core;
strcpy(cap->driver, "cx8800");
- strlcpy(cap->card, cx88_boards[core->board].name,
- sizeof(cap->card));
+ strlcpy(cap->card, core->board.name, sizeof(cap->card));
sprintf(cap->bus_info,"PCI:%s",pci_name(dev->pci));
cap->version = CX88_VERSION_CODE;
cap->capabilities =
V4L2_CAP_READWRITE |
V4L2_CAP_STREAMING |
V4L2_CAP_VBI_CAPTURE;
- if (UNSET != core->tuner_type)
+ if (UNSET != core->board.tuner_type)
cap->capabilities |= V4L2_CAP_TUNER;
return 0;
}
#ifdef CONFIG_VIDEO_V4L1_COMPAT
static int vidiocgmbuf (struct file *file, void *priv, struct video_mbuf *mbuf)
{
- struct cx8800_fh *fh = priv;
- struct videobuf_queue *q;
- struct v4l2_requestbuffers req;
- unsigned int i;
- int err;
-
- q = get_queue(fh);
- memset(&req,0,sizeof(req));
- req.type = q->type;
- req.count = 8;
- req.memory = V4L2_MEMORY_MMAP;
- err = videobuf_reqbufs(q,&req);
- if (err < 0)
- return err;
+ struct cx8800_fh *fh = priv;
- mbuf->frames = req.count;
- mbuf->size = 0;
- for (i = 0; i < mbuf->frames; i++) {
- mbuf->offsets[i] = q->bufs[i]->boff;
- mbuf->size += q->bufs[i]->bsize;
- }
- return 0;
+ return videobuf_cgmbuf (get_queue(fh), mbuf, 8);
}
#endif
n = i->index;
if (n >= 4)
return -EINVAL;
- if (0 == INPUT(n)->type)
+ if (0 == INPUT(n).type)
return -EINVAL;
memset(i,0,sizeof(*i));
i->index = n;
i->type = V4L2_INPUT_TYPE_CAMERA;
- strcpy(i->name,iname[INPUT(n)->type]);
- if ((CX88_VMUX_TELEVISION == INPUT(n)->type) ||
- (CX88_VMUX_CABLE == INPUT(n)->type))
+ strcpy(i->name,iname[INPUT(n).type]);
+ if ((CX88_VMUX_TELEVISION == INPUT(n).type) ||
+ (CX88_VMUX_CABLE == INPUT(n).type))
i->type = V4L2_INPUT_TYPE_TUNER;
i->std = CX88_NORMS;
return 0;
static int vidioc_queryctrl (struct file *file, void *priv,
struct v4l2_queryctrl *qctrl)
{
+ struct cx88_core *core = ((struct cx8800_fh *)priv)->dev->core;
+
qctrl->id = v4l2_ctrl_next(ctrl_classes, qctrl->id);
if (unlikely(qctrl->id == 0))
return -EINVAL;
- return cx8800_ctrl_query(qctrl);
+ return cx8800_ctrl_query(core, qctrl);
}
static int vidioc_g_ctrl (struct file *file, void *priv,
struct cx88_core *core = ((struct cx8800_fh *)priv)->dev->core;
u32 reg;
- if (unlikely(UNSET == core->tuner_type))
+ if (unlikely(UNSET == core->board.tuner_type))
return -EINVAL;
if (0 != t->index)
return -EINVAL;
{
struct cx88_core *core = ((struct cx8800_fh *)priv)->dev->core;
- if (UNSET == core->tuner_type)
+ if (UNSET == core->board.tuner_type)
return -EINVAL;
if (0 != t->index)
return -EINVAL;
struct cx8800_fh *fh = priv;
struct cx88_core *core = fh->dev->core;
- if (unlikely(UNSET == core->tuner_type))
+ if (unlikely(UNSET == core->board.tuner_type))
return -EINVAL;
/* f->type = fh->radio ? V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV; */
int cx88_set_freq (struct cx88_core *core,
struct v4l2_frequency *f)
{
- if (unlikely(UNSET == core->tuner_type))
+ if (unlikely(UNSET == core->board.tuner_type))
return -EINVAL;
if (unlikely(f->tuner != 0))
return -EINVAL;
struct cx88_core *core = dev->core;
strcpy(cap->driver, "cx8800");
- strlcpy(cap->card, cx88_boards[core->board].name,
- sizeof(cap->card));
+ strlcpy(cap->card, core->board.name, sizeof(cap->card));
sprintf(cap->bus_info,"PCI:%s", pci_name(dev->pci));
cap->version = CX88_VERSION_CODE;
cap->capabilities = V4L2_CAP_TUNER;
while (!list_empty(&q->active)) {
buf = list_entry(q->active.next, struct cx88_buffer, vb.queue);
list_del(&buf->vb.queue);
- buf->vb.state = STATE_ERROR;
+ buf->vb.state = VIDEOBUF_ERROR;
wake_up(&buf->vb.done);
printk("%s/0: [%p/%d] timeout - dma=0x%08lx\n", core->name,
buf, buf->vb.i, (unsigned long)buf->risc.dma);
int loop, handled = 0;
for (loop = 0; loop < 10; loop++) {
- status = cx_read(MO_PCI_INTSTAT) & (core->pci_irqmask | 0x01);
+ status = cx_read(MO_PCI_INTSTAT) &
+ (core->pci_irqmask | PCI_INT_VIDINT);
if (0 == status)
goto out;
cx_write(MO_PCI_INTSTAT, status);
if (status & core->pci_irqmask)
cx88_core_irq(core,status);
- if (status & 0x01)
+ if (status & PCI_INT_VIDINT)
cx8800_vid_irq(dev);
};
if (10 == loop) {
{
.name = "cx8800-radio",
.type = VID_TYPE_TUNER,
- .hardware = 0,
.fops = &radio_fops,
.minor = -1,
.vidioc_querycap = radio_querycap,
.vidioc_s_ctrl = vidioc_s_ctrl,
.vidioc_g_frequency = vidioc_g_frequency,
.vidioc_s_frequency = vidioc_s_frequency,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+ .vidioc_g_register = vidioc_g_register,
+ .vidioc_s_register = vidioc_s_register,
+#endif
};
/* ----------------------------------------------------------- */
dev->pci_lat,(unsigned long long)pci_resource_start(pci_dev,0));
pci_set_master(pci_dev);
- if (!pci_dma_supported(pci_dev,0xffffffff)) {
+ if (!pci_dma_supported(pci_dev,DMA_32BIT_MASK)) {
printk("%s/0: Oops: no 32bit PCI DMA ???\n",core->name);
err = -EIO;
goto fail_core;
err = request_irq(pci_dev->irq, cx8800_irq,
IRQF_SHARED | IRQF_DISABLED, core->name, dev);
if (err < 0) {
- printk(KERN_ERR "%s: can't get IRQ %d\n",
+ printk(KERN_ERR "%s/0: can't get IRQ %d\n",
core->name,pci_dev->irq);
goto fail_core;
}
cx_set(MO_PCI_INTMSK, core->pci_irqmask);
/* load and configure helper modules */
- if (TUNER_ABSENT != core->tuner_type)
- request_module("tuner");
- if (cx88_boards[ core->board ].audio_chip == AUDIO_CHIP_WM8775)
+ if (core->board.audio_chip == AUDIO_CHIP_WM8775)
request_module("wm8775");
+ switch (core->boardnr) {
+ case CX88_BOARD_DVICO_FUSIONHDTV_5_GOLD:
+ case CX88_BOARD_DVICO_FUSIONHDTV_7_GOLD:
+ request_module("rtc-isl1208");
+ /* break intentionally omitted */
+ case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO:
+ request_module("ir-kbd-i2c");
+ }
+
/* register v4l devices */
dev->video_dev = cx88_vdev_init(core,dev->pci,
&cx8800_video_template,"video");
err = video_register_device(dev->video_dev,VFL_TYPE_GRABBER,
video_nr[core->nr]);
if (err < 0) {
- printk(KERN_INFO "%s: can't register video device\n",
+ printk(KERN_ERR "%s/0: can't register video device\n",
core->name);
goto fail_unreg;
}
err = video_register_device(dev->vbi_dev,VFL_TYPE_VBI,
vbi_nr[core->nr]);
if (err < 0) {
- printk(KERN_INFO "%s/0: can't register vbi device\n",
+ printk(KERN_ERR "%s/0: can't register vbi device\n",
core->name);
goto fail_unreg;
}
printk(KERN_INFO "%s/0: registered device vbi%d\n",
core->name,dev->vbi_dev->minor & 0x1f);
- if (core->has_radio) {
+ if (core->board.radio.type == CX88_RADIO) {
dev->radio_dev = cx88_vdev_init(core,dev->pci,
&cx8800_radio_template,"radio");
err = video_register_device(dev->radio_dev,VFL_TYPE_RADIO,
radio_nr[core->nr]);
if (err < 0) {
- printk(KERN_INFO "%s/0: can't register radio device\n",
+ printk(KERN_ERR "%s/0: can't register radio device\n",
core->name);
goto fail_unreg;
}
mutex_unlock(&core->lock);
/* start tvaudio thread */
- if (core->tuner_type != TUNER_ABSENT)
+ if (core->board.tuner_type != TUNER_ABSENT) {
core->kthread = kthread_run(cx88_audio_thread, core, "cx88 tvaudio");
+ if (IS_ERR(core->kthread)) {
+ err = PTR_ERR(core->kthread);
+ printk(KERN_ERR "%s/0: failed to create cx88 audio thread, err=%d\n",
+ core->name, err);
+ }
+ }
return 0;
fail_unreg:
core->kthread = NULL;
}
+ if (core->ir)
+ cx88_ir_stop(core, core->ir);
+
cx88_shutdown(core); /* FIXME */
pci_disable_device(pci_dev);
/* stop video+vbi capture */
spin_lock(&dev->slock);
if (!list_empty(&dev->vidq.active)) {
- printk("%s: suspend video\n", core->name);
+ printk("%s/0: suspend video\n", core->name);
stop_video_dma(dev);
del_timer(&dev->vidq.timeout);
}
if (!list_empty(&dev->vbiq.active)) {
- printk("%s: suspend vbi\n", core->name);
+ printk("%s/0: suspend vbi\n", core->name);
cx8800_stop_vbi_dma(dev);
del_timer(&dev->vbiq.timeout);
}
spin_unlock(&dev->slock);
+ if (core->ir)
+ cx88_ir_stop(core, core->ir);
/* FIXME -- shutdown device */
cx88_shutdown(core);
if (dev->state.disabled) {
err=pci_enable_device(pci_dev);
if (err) {
- printk(KERN_ERR "%s: can't enable device\n",
- core->name);
+ printk(KERN_ERR "%s/0: can't enable device\n",
+ core->name);
return err;
}
}
err= pci_set_power_state(pci_dev, PCI_D0);
if (err) {
- printk(KERN_ERR "%s: can't enable device\n",
- core->name);
-
+ printk(KERN_ERR "%s/0: can't set power state\n", core->name);
pci_disable_device(pci_dev);
dev->state.disabled = 1;
/* FIXME: re-initialize hardware */
cx88_reset(core);
+ if (core->ir)
+ cx88_ir_start(core, core->ir);
+
+ cx_set(MO_PCI_INTMSK, core->pci_irqmask);
/* restart video+vbi capture */
spin_lock(&dev->slock);
if (!list_empty(&dev->vidq.active)) {
- printk("%s: resume video\n", core->name);
+ printk("%s/0: resume video\n", core->name);
restart_video_queue(dev,&dev->vidq);
}
if (!list_empty(&dev->vbiq.active)) {
- printk("%s: resume vbi\n", core->name);
+ printk("%s/0: resume vbi\n", core->name);
cx8800_restart_vbi_queue(dev,&dev->vbiq);
}
spin_unlock(&dev->slock);
static int cx8800_init(void)
{
- printk(KERN_INFO "cx2388x v4l2 driver version %d.%d.%d loaded\n",
+ printk(KERN_INFO "cx88/0: cx2388x v4l2 driver version %d.%d.%d loaded\n",
(CX88_VERSION_CODE >> 16) & 0xff,
(CX88_VERSION_CODE >> 8) & 0xff,
CX88_VERSION_CODE & 0xff);
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff