#include <linux/input.h>
#include <linux/pci.h>
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include "cx88.h"
#include <media/ir-common.h>
u32 mask_keyup;
};
-static int ir_debug = 0;
+static int ir_debug;
module_param(ir_debug, int, 0644); /* debug level [IR] */
MODULE_PARM_DESC(ir_debug, "enable debug messages [IR]");
/* read gpio value */
gpio = cx_read(ir->gpio_addr);
- if (core->board == CX88_BOARD_NPGTECH_REALTV) {
+ switch (core->boardnr) {
+ case CX88_BOARD_NPGTECH_REALTV_TOP10FM:
/* This board apparently uses a combination of 2 GPIO
to represent the keys. Additionally, the second GPIO
can be used for parity.
auxgpio = cx_read(MO_GP1_IO);
/* Take out the parity part */
- gpio+=(auxgpio & 0xef);
- } else
+ gpio=(gpio & 0x7fd) + (auxgpio & 0xef);
+ break;
+ case CX88_BOARD_WINFAST_DTV1000:
+ gpio = (gpio & 0x6ff) | ((cx_read(MO_GP1_IO) << 8) & 0x900);
auxgpio = gpio;
-
+ break;
+ default:
+ auxgpio = gpio;
+ }
if (ir->polling) {
if (ir->last_gpio == auxgpio)
return;
(gpio & ir->mask_keydown) ? " down" : "",
(gpio & ir->mask_keyup) ? " up" : "");
- if (ir->mask_keydown) {
+ if (ir->core->boardnr == CX88_BOARD_NORWOOD_MICRO) {
+ u32 gpio_key = cx_read(MO_GP0_IO);
+
+ data = (data << 4) | ((gpio_key & 0xf0) >> 4);
+
+ ir_input_keydown(ir->input, &ir->ir, data, data);
+ ir_input_nokey(ir->input, &ir->ir);
+
+ } else if (ir->mask_keydown) {
/* bit set on keydown */
if (gpio & ir->mask_keydown) {
ir_input_keydown(ir->input, &ir->ir, data, data);
schedule_work(&ir->work);
}
-static void cx88_ir_work(void *data)
+static void cx88_ir_work(struct work_struct *work)
{
- struct cx88_IR *ir = data;
- unsigned long timeout;
+ struct cx88_IR *ir = container_of(work, struct cx88_IR, work);
cx88_ir_handle_key(ir);
- timeout = jiffies + (ir->polling * HZ / 1000);
- mod_timer(&ir->timer, timeout);
+ mod_timer(&ir->timer, jiffies + msecs_to_jiffies(ir->polling));
+}
+
+void cx88_ir_start(struct cx88_core *core, struct cx88_IR *ir)
+{
+ if (ir->polling) {
+ setup_timer(&ir->timer, ir_timer, (unsigned long)ir);
+ INIT_WORK(&ir->work, cx88_ir_work);
+ schedule_work(&ir->work);
+ }
+ if (ir->sampling) {
+ core->pci_irqmask |= PCI_INT_IR_SMPINT;
+ cx_write(MO_DDS_IO, 0xa80a80); /* 4 kHz sample rate */
+ cx_write(MO_DDSCFG_IO, 0x5); /* enable */
+ }
+}
+
+void cx88_ir_stop(struct cx88_core *core, struct cx88_IR *ir)
+{
+ if (ir->sampling) {
+ cx_write(MO_DDSCFG_IO, 0x0);
+ core->pci_irqmask &= ~PCI_INT_IR_SMPINT;
+ }
+
+ if (ir->polling) {
+ del_timer_sync(&ir->timer);
+ flush_scheduled_work();
+ }
}
/* ---------------------------------------------------------------------- */
struct input_dev *input_dev;
IR_KEYTAB_TYPE *ir_codes = NULL;
int ir_type = IR_TYPE_OTHER;
+ int err = -ENOMEM;
ir = kzalloc(sizeof(*ir), GFP_KERNEL);
input_dev = input_allocate_device();
- if (!ir || !input_dev) {
- kfree(ir);
- input_free_device(input_dev);
- return -ENOMEM;
- }
+ if (!ir || !input_dev)
+ goto err_out_free;
ir->input = input_dev;
/* detect & configure */
- switch (core->board) {
+ switch (core->boardnr) {
case CX88_BOARD_DNTV_LIVE_DVB_T:
case CX88_BOARD_KWORLD_DVB_T:
case CX88_BOARD_KWORLD_DVB_T_CX22702:
case CX88_BOARD_HAUPPAUGE_NOVASE2_S1:
case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1:
case CX88_BOARD_HAUPPAUGE_HVR1100:
+ case CX88_BOARD_HAUPPAUGE_HVR3000:
+ case CX88_BOARD_HAUPPAUGE_HVR4000:
+ case CX88_BOARD_HAUPPAUGE_HVR4000LITE:
ir_codes = ir_codes_hauppauge_new;
ir_type = IR_TYPE_RC5;
ir->sampling = 1;
break;
+ case CX88_BOARD_WINFAST_DTV2000H:
+ ir_codes = ir_codes_winfast;
+ ir->gpio_addr = MO_GP0_IO;
+ ir->mask_keycode = 0x8f8;
+ ir->mask_keyup = 0x100;
+ ir->polling = 50; /* ms */
+ break;
case CX88_BOARD_WINFAST2000XP_EXPERT:
+ case CX88_BOARD_WINFAST_DTV1000:
ir_codes = ir_codes_winfast;
ir->gpio_addr = MO_GP0_IO;
ir->mask_keycode = 0x8f8;
ir->mask_keydown = 0x02;
ir->polling = 5; /* ms */
break;
- case CX88_BOARD_PROLINK_PLAYTVPVR:
+ case CX88_BOARD_PROLINK_PLAYTVPVR:
case CX88_BOARD_PIXELVIEW_PLAYTV_ULTRA_PRO:
ir_codes = ir_codes_pixelview;
ir->gpio_addr = MO_GP1_IO;
ir->mask_keyup = 0x80;
ir->polling = 1; /* ms */
break;
+ case CX88_BOARD_PROLINK_PV_8000GT:
+ case CX88_BOARD_PROLINK_PV_GLOBAL_XTREME:
+ ir_codes = ir_codes_pixelview_new;
+ ir->gpio_addr = MO_GP1_IO;
+ ir->mask_keycode = 0x3f;
+ ir->mask_keyup = 0x80;
+ ir->polling = 1; /* ms */
+ break;
case CX88_BOARD_KWORLD_LTV883:
ir_codes = ir_codes_pixelview;
ir->gpio_addr = MO_GP1_IO;
ir_type = IR_TYPE_PD;
ir->sampling = 0xff00; /* address */
break;
- case CX88_BOARD_NPGTECH_REALTV:
+ case CX88_BOARD_NORWOOD_MICRO:
+ ir_codes = ir_codes_norwood;
+ ir->gpio_addr = MO_GP1_IO;
+ ir->mask_keycode = 0x0e;
+ ir->mask_keyup = 0x80;
+ ir->polling = 50; /* ms */
+ break;
+ case CX88_BOARD_NPGTECH_REALTV_TOP10FM:
ir_codes = ir_codes_npgtech;
ir->gpio_addr = MO_GP0_IO;
ir->mask_keycode = 0xfa;
ir->polling = 50; /* ms */
break;
+ case CX88_BOARD_PINNACLE_PCTV_HD_800i:
+ ir_codes = ir_codes_pinnacle_pctv_hd;
+ ir_type = IR_TYPE_RC5;
+ ir->sampling = 1;
+ break;
+ case CX88_BOARD_POWERCOLOR_REAL_ANGEL:
+ ir_codes = ir_codes_powercolor_real_angel;
+ ir->gpio_addr = MO_GP2_IO;
+ ir->mask_keycode = 0x7e;
+ ir->polling = 100; /* ms */
+ break;
}
if (NULL == ir_codes) {
- kfree(ir);
- input_free_device(input_dev);
- return -ENODEV;
+ err = -ENODEV;
+ goto err_out_free;
}
/* init input device */
- snprintf(ir->name, sizeof(ir->name), "cx88 IR (%s)",
- cx88_boards[core->board].name);
+ snprintf(ir->name, sizeof(ir->name), "cx88 IR (%s)", core->board.name);
snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0", pci_name(pci));
ir_input_init(input_dev, &ir->ir, ir_type, ir_codes);
input_dev->id.vendor = pci->vendor;
input_dev->id.product = pci->device;
}
- input_dev->cdev.dev = &pci->dev;
+ input_dev->dev.parent = &pci->dev;
/* record handles to ourself */
ir->core = core;
core->ir = ir;
- if (ir->polling) {
- INIT_WORK(&ir->work, cx88_ir_work, ir);
- init_timer(&ir->timer);
- ir->timer.function = ir_timer;
- ir->timer.data = (unsigned long)ir;
- schedule_work(&ir->work);
- }
- if (ir->sampling) {
- core->pci_irqmask |= (1 << 18); /* IR_SMP_INT */
- cx_write(MO_DDS_IO, 0xa80a80); /* 4 kHz sample rate */
- cx_write(MO_DDSCFG_IO, 0x5); /* enable */
- }
+ cx88_ir_start(core, ir);
/* all done */
- input_register_device(ir->input);
+ err = input_register_device(ir->input);
+ if (err)
+ goto err_out_stop;
return 0;
+
+ err_out_stop:
+ cx88_ir_stop(core, ir);
+ core->ir = NULL;
+ err_out_free:
+ input_free_device(input_dev);
+ kfree(ir);
+ return err;
}
int cx88_ir_fini(struct cx88_core *core)
if (NULL == ir)
return 0;
- if (ir->sampling) {
- cx_write(MO_DDSCFG_IO, 0x0);
- core->pci_irqmask &= ~(1 << 18);
- }
- if (ir->polling) {
- del_timer(&ir->timer);
- flush_scheduled_work();
- }
-
+ cx88_ir_stop(core, ir);
input_unregister_device(ir->input);
kfree(ir);
{
struct cx88_IR *ir = core->ir;
u32 samples, ircode;
- int i;
+ int i, start, range, toggle, dev, code;
if (NULL == ir)
return;
ir_dump_samples(ir->samples, ir->scount);
/* decode it */
- switch (core->board) {
+ switch (core->boardnr) {
case CX88_BOARD_TERRATEC_CINERGY_1400_DVB_T1:
case CX88_BOARD_DNTV_LIVE_DVB_T_PRO:
ircode = ir_decode_pulsedistance(ir->samples, ir->scount, 1, 4);
case CX88_BOARD_HAUPPAUGE_NOVASE2_S1:
case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1:
case CX88_BOARD_HAUPPAUGE_HVR1100:
+ case CX88_BOARD_HAUPPAUGE_HVR3000:
+ case CX88_BOARD_HAUPPAUGE_HVR4000:
+ case CX88_BOARD_HAUPPAUGE_HVR4000LITE:
+ ircode = ir_decode_biphase(ir->samples, ir->scount, 5, 7);
+ ir_dprintk("biphase decoded: %x\n", ircode);
+ /*
+ * RC5 has an extension bit which adds a new range
+ * of available codes, this is detected here. Also
+ * hauppauge remotes (black/silver) always use
+ * specific device ids. If we do not filter the
+ * device ids then messages destined for devices
+ * such as TVs (id=0) will get through to the
+ * device causing mis-fired events.
+ */
+ /* split rc5 data block ... */
+ start = (ircode & 0x2000) >> 13;
+ range = (ircode & 0x1000) >> 12;
+ toggle= (ircode & 0x0800) >> 11;
+ dev = (ircode & 0x07c0) >> 6;
+ code = (ircode & 0x003f) | ((range << 6) ^ 0x0040);
+ if( start != 1)
+ /* no key pressed */
+ break;
+ if ( dev != 0x1e && dev != 0x1f )
+ /* not a hauppauge remote */
+ break;
+ ir_input_keydown(ir->input, &ir->ir, code, ircode);
+ ir->release = jiffies + msecs_to_jiffies(120);
+ break;
+ case CX88_BOARD_PINNACLE_PCTV_HD_800i:
ircode = ir_decode_biphase(ir->samples, ir->scount, 5, 7);
ir_dprintk("biphase decoded: %x\n", ircode);
if ((ircode & 0xfffff000) != 0x3000)
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff