#include "cx88.h"
#include "tea5767.h"
-#include "tuner-xc2028.h"
static unsigned int tuner[] = {[0 ... (CX88_MAXBOARDS - 1)] = UNSET };
static unsigned int radio[] = {[0 ... (CX88_MAXBOARDS - 1)] = UNSET };
/* ------------------------------------------------------------------ */
/* board config info */
+/* If radio_type !=UNSET, radio_addr should be specified
+ */
+
static const struct cx88_board cx88_boards[] = {
[CX88_BOARD_UNKNOWN] = {
.name = "UNKNOWN/GENERIC",
.mpeg = CX88_MPEG_DVB,
},
[CX88_BOARD_HAUPPAUGE_HVR3000] = {
- /* FIXME: Add dvb & radio support */
.name = "Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T",
.tuner_type = TUNER_PHILIPS_FMD1216ME_MK3,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.tda9887_conf = TDA9887_PRESENT,
+ .audio_chip = V4L2_IDENT_WM8775,
.input = {{
.type = CX88_VMUX_TELEVISION,
.vmux = 0,
.gpio0 = 0x84bf,
+ /* 1: TV Audio / FM Mono */
+ .audioroute = 1,
},{
.type = CX88_VMUX_COMPOSITE1,
.vmux = 1,
.gpio0 = 0x84bf,
+ /* 2: Line-In */
+ .audioroute = 2,
},{
.type = CX88_VMUX_SVIDEO,
.vmux = 2,
.gpio0 = 0x84bf,
+ /* 2: Line-In */
+ .audioroute = 2,
}},
+ .radio = {
+ .type = CX88_RADIO,
+ .gpio0 = 0x84bf,
+ /* 4: FM Stereo (untested) */
+ .audioroute = 8,
+ },
.mpeg = CX88_MPEG_DVB,
+ .num_frontends = 2,
},
[CX88_BOARD_NORWOOD_MICRO] = {
.name = "Norwood Micro TV Tuner",
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.tda9887_conf = TDA9887_PRESENT,
- .audio_chip = AUDIO_CHIP_WM8775,
+ .audio_chip = V4L2_IDENT_WM8775,
+ /*
+ * gpio0 as reported by Mike Crash <mike AT mikecrash.com>
+ */
.input = {{
.type = CX88_VMUX_TELEVISION,
.vmux = 0,
- .gpio0 = 0xe780,
+ .gpio0 = 0xef88,
+ /* 1: TV Audio / FM Mono */
.audioroute = 1,
},{
.type = CX88_VMUX_COMPOSITE1,
.vmux = 1,
- .gpio0 = 0xe780,
+ .gpio0 = 0xef88,
+ /* 2: Line-In */
.audioroute = 2,
},{
.type = CX88_VMUX_SVIDEO,
.vmux = 2,
- .gpio0 = 0xe780,
+ .gpio0 = 0xef88,
+ /* 2: Line-In */
.audioroute = 2,
}},
- /* fixme: Add radio support */
.mpeg = CX88_MPEG_DVB | CX88_MPEG_BLACKBIRD,
+ .radio = {
+ .type = CX88_RADIO,
+ .gpio0 = 0xef88,
+ /* 4: FM Stereo (untested) */
+ .audioroute = 8,
+ },
},
[CX88_BOARD_ADSTECH_PTV_390] = {
.name = "ADS Tech Instant Video PCI",
.name = "Pinnacle Hybrid PCTV",
.tuner_type = TUNER_XC2028,
.tuner_addr = 0x61,
+ .radio_type = TUNER_XC2028,
+ .radio_addr = 0x61,
.input = { {
.type = CX88_VMUX_TELEVISION,
.vmux = 0,
+ .gpio0 = 0x004ff,
+ .gpio1 = 0x010ff,
+ .gpio2 = 0x00001,
}, {
.type = CX88_VMUX_COMPOSITE1,
.vmux = 1,
+ .gpio0 = 0x004fb,
+ .gpio1 = 0x010ef,
+ .audioroute = 1,
}, {
.type = CX88_VMUX_SVIDEO,
.vmux = 2,
+ .gpio0 = 0x004fb,
+ .gpio1 = 0x010ef,
+ .audioroute = 1,
} },
.radio = {
.type = CX88_RADIO,
.gpio1 = 0x010ff,
.gpio2 = 0x0ff,
},
+ .mpeg = CX88_MPEG_DVB,
},
[CX88_BOARD_WINFAST_TV2000_XP_GLOBAL] = {
.name = "Winfast TV2000 XP Global",
},
},
[CX88_BOARD_POWERCOLOR_REAL_ANGEL] = {
- .name = "PowerColor Real Angel 330",
+ .name = "PowerColor RA330", /* Long names may confuse LIRC. */
.tuner_type = TUNER_XC2028,
.tuner_addr = 0x61,
.input = { {
+ .type = CX88_VMUX_DEBUG,
+ .vmux = 3, /* Due to the way the cx88 driver is written, */
+ .gpio0 = 0x00ff, /* there is no way to deactivate audio pass- */
+ .gpio1 = 0xf39d, /* through without this entry. Furthermore, if */
+ .gpio3 = 0x0000, /* the TV mux entry is first, you get audio */
+ }, { /* from the tuner on boot for a little while. */
.type = CX88_VMUX_TELEVISION,
.vmux = 0,
- .gpio0 = 0x0400, /* pin 2:mute = 0 (off?) */
+ .gpio0 = 0x00ff,
.gpio1 = 0xf35d,
- .gpio2 = 0x0800, /* pin 19:audio = 0 (tv) */
+ .gpio3 = 0x0000,
}, {
.type = CX88_VMUX_COMPOSITE1,
.vmux = 1,
- .gpio0 = 0x0400, /* probably? or 0x0404 to turn mute on */
- .gpio1 = 0x0000,
- .gpio2 = 0x0808, /* pin 19:audio = 1 (line) */
+ .gpio0 = 0x00ff,
+ .gpio1 = 0xf37d,
+ .gpio3 = 0x0000,
}, {
.type = CX88_VMUX_SVIDEO,
.vmux = 2,
.gpio0 = 0x000ff,
.gpio1 = 0x0f37d,
- .gpio2 = 0x00019,
.gpio3 = 0x00000,
} },
.radio = {
.type = CX88_RADIO,
.gpio0 = 0x000ff,
.gpio1 = 0x0f35d,
- .gpio2 = 0x00019,
.gpio3 = 0x00000,
},
},
},
[CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO] = {
.name = "DViCO FusionHDTV DVB-T PRO",
- .tuner_type = TUNER_ABSENT, /* XXX: Has XC3028 */
+ .tuner_type = TUNER_XC2028,
+ .tuner_addr = 0x61,
.radio_type = UNSET,
- .tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.input = { {
.type = CX88_VMUX_COMPOSITE1,
.vmux = 2,
.gpio0 = 0x16d9,
}},
+ .mpeg = CX88_MPEG_DVB,
+ },
+ [CX88_BOARD_PROLINK_PV_8000GT] = {
+ .name = "Prolink Pixelview MPEG 8000GT",
+ .tuner_type = TUNER_XC2028,
+ .tuner_addr = 0x61,
+ .input = { {
+ .type = CX88_VMUX_TELEVISION,
+ .vmux = 0,
+ .gpio0 = 0x0ff,
+ .gpio2 = 0x0cfb,
+ }, {
+ .type = CX88_VMUX_COMPOSITE1,
+ .vmux = 1,
+ .gpio2 = 0x0cfb,
+ }, {
+ .type = CX88_VMUX_SVIDEO,
+ .vmux = 2,
+ .gpio2 = 0x0cfb,
+ } },
+ .radio = {
+ .type = CX88_RADIO,
+ .gpio2 = 0x0cfb,
+ },
+ },
+ [CX88_BOARD_PROLINK_PV_GLOBAL_XTREME] = {
+ .name = "Prolink Pixelview Global Extreme",
+ .tuner_type = TUNER_XC2028,
+ .tuner_addr = 0x61,
+ .input = { {
+ .type = CX88_VMUX_TELEVISION,
+ .vmux = 0,
+ .gpio0 = 0x04fb,
+ .gpio1 = 0x04080,
+ .gpio2 = 0x0cf7,
+ }, {
+ .type = CX88_VMUX_COMPOSITE1,
+ .vmux = 1,
+ .gpio0 = 0x04fb,
+ .gpio1 = 0x04080,
+ .gpio2 = 0x0cfb,
+ }, {
+ .type = CX88_VMUX_SVIDEO,
+ .vmux = 2,
+ .gpio0 = 0x04fb,
+ .gpio1 = 0x04080,
+ .gpio2 = 0x0cfb,
+ } },
+ .radio = {
+ .type = CX88_RADIO,
+ .gpio0 = 0x04ff,
+ .gpio1 = 0x04080,
+ .gpio2 = 0x0cf7,
+ },
+ },
+ /* Both radio, analog and ATSC work with this board.
+ However, for analog to work, s5h1409 gate should be open,
+ otherwise, tuner-xc3028 won't be detected.
+ A proper fix require using the newer i2c methods to add
+ tuner-xc3028 without doing an i2c probe.
+ */
+ [CX88_BOARD_KWORLD_ATSC_120] = {
+ .name = "Kworld PlusTV HD PCI 120 (ATSC 120)",
+ .tuner_type = TUNER_XC2028,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .input = { {
+ .type = CX88_VMUX_TELEVISION,
+ .vmux = 0,
+ .gpio0 = 0x000000ff,
+ .gpio1 = 0x0000f35d,
+ .gpio2 = 0x00000000,
+ }, {
+ .type = CX88_VMUX_COMPOSITE1,
+ .vmux = 1,
+ .gpio0 = 0x000000ff,
+ .gpio1 = 0x0000f37e,
+ .gpio2 = 0x00000000,
+ }, {
+ .type = CX88_VMUX_SVIDEO,
+ .vmux = 2,
+ .gpio0 = 0x000000ff,
+ .gpio1 = 0x0000f37e,
+ .gpio2 = 0x00000000,
+ } },
+ .radio = {
+ .type = CX88_RADIO,
+ .gpio0 = 0x000000ff,
+ .gpio1 = 0x0000f35d,
+ .gpio2 = 0x00000000,
+ },
+ .mpeg = CX88_MPEG_DVB,
+ },
+ [CX88_BOARD_HAUPPAUGE_HVR4000] = {
+ .name = "Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid",
+ .tuner_type = TUNER_PHILIPS_FMD1216ME_MK3,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .tda9887_conf = TDA9887_PRESENT,
+ .audio_chip = V4L2_IDENT_WM8775,
+ /*
+ * GPIO0 (WINTV2000)
+ *
+ * Analogue SAT DVB-T
+ * Antenna 0xc4bf 0xc4bb
+ * Composite 0xc4bf 0xc4bb
+ * S-Video 0xc4bf 0xc4bb
+ * Composite1 0xc4ff 0xc4fb
+ * S-Video1 0xc4ff 0xc4fb
+ *
+ * BIT VALUE FUNCTION GP{x}_IO
+ * 0 1 I:?
+ * 1 1 I:?
+ * 2 1 O:MPEG PORT 0=DVB-T 1=DVB-S
+ * 3 1 I:?
+ * 4 1 I:?
+ * 5 1 I:?
+ * 6 0 O:INPUT SELECTOR 0=INTERNAL 1=EXPANSION
+ * 7 1 O:DVB-T DEMOD RESET LOW
+ *
+ * BIT VALUE FUNCTION GP{x}_OE
+ * 8 0 I
+ * 9 0 I
+ * a 1 O
+ * b 0 I
+ * c 0 I
+ * d 0 I
+ * e 1 O
+ * f 1 O
+ *
+ * WM8775 ADC
+ *
+ * 1: TV Audio / FM Mono
+ * 2: Line-In
+ * 3: Line-In Expansion
+ * 4: FM Stereo
+ */
+ .input = {{
+ .type = CX88_VMUX_TELEVISION,
+ .vmux = 0,
+ .gpio0 = 0xc4bf,
+ /* 1: TV Audio / FM Mono */
+ .audioroute = 1,
+ }, {
+ .type = CX88_VMUX_COMPOSITE1,
+ .vmux = 1,
+ .gpio0 = 0xc4bf,
+ /* 2: Line-In */
+ .audioroute = 2,
+ }, {
+ .type = CX88_VMUX_SVIDEO,
+ .vmux = 2,
+ .gpio0 = 0xc4bf,
+ /* 2: Line-In */
+ .audioroute = 2,
+ } },
+ .radio = {
+ .type = CX88_RADIO,
+ .gpio0 = 0xc4bf,
+ /* 4: FM Stereo */
+ .audioroute = 8,
+ },
+ .mpeg = CX88_MPEG_DVB,
+ .num_frontends = 2,
+ },
+ [CX88_BOARD_HAUPPAUGE_HVR4000LITE] = {
+ .name = "Hauppauge WinTV-HVR4000(Lite) DVB-S/S2",
+ .tuner_type = UNSET,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .input = {{
+ .type = CX88_VMUX_DVB,
+ .vmux = 0,
+ } },
+ .mpeg = CX88_MPEG_DVB,
+ },
+ [CX88_BOARD_TEVII_S420] = {
+ .name = "TeVii S420 DVB-S",
+ .tuner_type = UNSET,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .input = {{
+ .type = CX88_VMUX_DVB,
+ .vmux = 0,
+ } },
+ .mpeg = CX88_MPEG_DVB,
+ },
+ [CX88_BOARD_TEVII_S460] = {
+ .name = "TeVii S460 DVB-S/S2",
+ .tuner_type = UNSET,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .input = {{
+ .type = CX88_VMUX_DVB,
+ .vmux = 0,
+ } },
+ .mpeg = CX88_MPEG_DVB,
+ },
+ [CX88_BOARD_OMICOM_SS4_PCI] = {
+ .name = "Omicom SS4 DVB-S/S2 PCI",
+ .tuner_type = UNSET,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .input = {{
+ .type = CX88_VMUX_DVB,
+ .vmux = 0,
+ } },
+ .mpeg = CX88_MPEG_DVB,
+ },
+ [CX88_BOARD_TBS_8920] = {
+ .name = "TBS 8920 DVB-S/S2",
+ .tuner_type = TUNER_ABSENT,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .input = {{
+ .type = CX88_VMUX_DVB,
+ .vmux = 1,
+ } },
+ .mpeg = CX88_MPEG_DVB,
+ },
+ [CX88_BOARD_PROF_7300] = {
+ .name = "PROF 7300 DVB-S/S2",
+ .tuner_type = UNSET,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .input = {{
+ .type = CX88_VMUX_DVB,
+ .vmux = 0,
+ } },
+ .mpeg = CX88_MPEG_DVB,
},
};
.subvendor = 0x14f1,
.subdevice = 0x8852,
.card = CX88_BOARD_GENIATECH_X8000_MT,
- },{
+ }, {
.subvendor = 0x18ac,
.subdevice = 0xd610,
.card = CX88_BOARD_DVICO_FUSIONHDTV_7_GOLD,
- }
+ }, {
+ .subvendor = 0x1554,
+ .subdevice = 0x4935,
+ .card = CX88_BOARD_PROLINK_PV_8000GT,
+ }, {
+ .subvendor = 0x1554,
+ .subdevice = 0x4976,
+ .card = CX88_BOARD_PROLINK_PV_GLOBAL_XTREME,
+ }, {
+ .subvendor = 0x17de,
+ .subdevice = 0x08c1,
+ .card = CX88_BOARD_KWORLD_ATSC_120,
+ }, {
+ .subvendor = 0x0070,
+ .subdevice = 0x6900,
+ .card = CX88_BOARD_HAUPPAUGE_HVR4000,
+ }, {
+ .subvendor = 0x0070,
+ .subdevice = 0x6904,
+ .card = CX88_BOARD_HAUPPAUGE_HVR4000,
+ }, {
+ .subvendor = 0x0070,
+ .subdevice = 0x6902,
+ .card = CX88_BOARD_HAUPPAUGE_HVR4000,
+ }, {
+ .subvendor = 0x0070,
+ .subdevice = 0x6905,
+ .card = CX88_BOARD_HAUPPAUGE_HVR4000LITE,
+ }, {
+ .subvendor = 0x0070,
+ .subdevice = 0x6906,
+ .card = CX88_BOARD_HAUPPAUGE_HVR4000LITE,
+ }, {
+ .subvendor = 0xd420,
+ .subdevice = 0x9022,
+ .card = CX88_BOARD_TEVII_S420,
+ }, {
+ .subvendor = 0xd460,
+ .subdevice = 0x9022,
+ .card = CX88_BOARD_TEVII_S460,
+ }, {
+ .subvendor = 0xA044,
+ .subdevice = 0x2011,
+ .card = CX88_BOARD_OMICOM_SS4_PCI,
+ }, {
+ .subvendor = 0x8920,
+ .subdevice = 0x8888,
+ .card = CX88_BOARD_TBS_8920,
+ }, {
+ .subvendor = 0xB033,
+ .subdevice = 0x3033,
+ .card = CX88_BOARD_PROF_7300,
+ },
};
/* ----------------------------------------------------------------------- */
case 14669: /* WinTV-HVR3000 (OEM, no IR, no b/panel video - Low profile) */
case 28552: /* WinTV-PVR 'Roslyn' (No IR) */
case 34519: /* WinTV-PCI-FM */
+ case 69009:
+ /* WinTV-HVR4000 (DVBS/S2/T, Video and IR, back panel inputs) */
+ case 69100: /* WinTV-HVR4000LITE (DVBS/S2, IR) */
+ case 69500: /* WinTV-HVR4000LITE (DVBS/S2, No IR) */
+ case 69559:
+ /* WinTV-HVR4000 (DVBS/S2/T, Video no IR, back panel inputs) */
+ case 69569: /* WinTV-HVR4000 (DVBS/S2/T, Video no IR) */
case 90002: /* Nova-T-PCI (9002) */
case 92001: /* Nova-S-Plus (Video and IR) */
case 92002: /* Nova-S-Plus (Video and IR) */
/* ------------------------------------------------------------------- */
/* some Divco specific stuff */
-static int cx88_dvico_xc2028_callback(void *ptr, int command, int arg)
+static int cx88_dvico_xc2028_callback(struct cx88_core *core,
+ int command, int arg)
{
- struct cx88_core *core = ptr;
-
switch (command) {
case XC2028_TUNER_RESET:
- cx_write(MO_GP0_IO, 0x101000);
- mdelay(5);
- cx_set(MO_GP0_IO, 0x101010);
+ switch (core->boardnr) {
+ case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO:
+ /* GPIO-4 xc3028 tuner */
+
+ cx_set(MO_GP0_IO, 0x00001000);
+ cx_clear(MO_GP0_IO, 0x00000010);
+ msleep(100);
+ cx_set(MO_GP0_IO, 0x00000010);
+ msleep(100);
+ break;
+ default:
+ cx_write(MO_GP0_IO, 0x101000);
+ mdelay(5);
+ cx_set(MO_GP0_IO, 0x101010);
+ }
break;
default:
return -EINVAL;
/* ----------------------------------------------------------------------- */
/* some Geniatech specific stuff */
-static int cx88_xc3028_geniatech_tuner_callback(void *priv, int command, int mode)
+static int cx88_xc3028_geniatech_tuner_callback(struct cx88_core *core,
+ int command, int mode)
{
- struct i2c_algo_bit_data *i2c_algo = priv;
- struct cx88_core *core = i2c_algo->data;
-
switch (command) {
case XC2028_TUNER_RESET:
switch (INPUT(core->input).type) {
return -EINVAL;
}
+/* ------------------------------------------------------------------- */
+/* some Divco specific stuff */
+static int cx88_pv_8000gt_callback(struct cx88_core *core,
+ int command, int arg)
+{
+ switch (command) {
+ case XC2028_TUNER_RESET:
+ cx_write(MO_GP2_IO, 0xcf7);
+ mdelay(50);
+ cx_write(MO_GP2_IO, 0xef5);
+ mdelay(50);
+ cx_write(MO_GP2_IO, 0xcf7);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
/* ----------------------------------------------------------------------- */
/* some DViCO specific stuff */
}
}
-static int cx88_xc2028_tuner_callback(void *priv, int command, int arg)
+static int cx88_xc2028_tuner_callback(struct cx88_core *core,
+ int command, int arg)
{
- struct i2c_algo_bit_data *i2c_algo = priv;
- struct cx88_core *core = i2c_algo->data;
-
/* Board-specific callbacks */
switch (core->boardnr) {
case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL:
case CX88_BOARD_POWERCOLOR_REAL_ANGEL:
case CX88_BOARD_GENIATECH_X8000_MT:
- return cx88_xc3028_geniatech_tuner_callback(priv, command, arg);
+ case CX88_BOARD_KWORLD_ATSC_120:
+ return cx88_xc3028_geniatech_tuner_callback(core,
+ command, arg);
+ case CX88_BOARD_PROLINK_PV_8000GT:
+ case CX88_BOARD_PROLINK_PV_GLOBAL_XTREME:
+ return cx88_pv_8000gt_callback(core, command, arg);
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO:
- return cx88_dvico_xc2028_callback(priv, command, arg);
+ case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO:
+ return cx88_dvico_xc2028_callback(core, command, arg);
}
switch (command) {
* PCTV HD 800i with an xc5000 sillicon tuner. This is used for both *
* analog tuner attach (tuner-core.c) and dvb tuner attach (cx88-dvb.c) */
-static int cx88_xc5000_tuner_callback(void *priv, int command, int arg)
+static int cx88_xc5000_tuner_callback(struct cx88_core *core,
+ int command, int arg)
{
- struct i2c_algo_bit_data *i2c_algo = priv;
- struct cx88_core *core = i2c_algo->data;
-
switch (core->boardnr) {
case CX88_BOARD_PINNACLE_PCTV_HD_800i:
if (command == 0) { /* This is the reset command from xc5000 */
return 0; /* Should never be here */
}
-int cx88_tuner_callback(void *priv, int command, int arg)
+int cx88_tuner_callback(void *priv, int component, int command, int arg)
{
struct i2c_algo_bit_data *i2c_algo = priv;
- struct cx88_core *core = i2c_algo->data;
+ struct cx88_core *core;
+
+ if (!i2c_algo) {
+ printk(KERN_ERR "cx88: Error - i2c private data undefined.\n");
+ return -EINVAL;
+ }
+
+ core = i2c_algo->data;
+
+ if (!core) {
+ printk(KERN_ERR "cx88: Error - device struct undefined.\n");
+ return -EINVAL;
+ }
+
+ if (component != DVB_FRONTEND_COMPONENT_TUNER)
+ return -EINVAL;
switch (core->board.tuner_type) {
case TUNER_XC2028:
info_printk(core, "Calling XC2028/3028 callback\n");
- return cx88_xc2028_tuner_callback(priv, command, arg);
+ return cx88_xc2028_tuner_callback(core, command, arg);
case TUNER_XC5000:
info_printk(core, "Calling XC5000 callback\n");
- return cx88_xc5000_tuner_callback(priv, command, arg);
+ return cx88_xc5000_tuner_callback(core, command, arg);
}
err_printk(core, "Error: Calling callback for tuner %d\n",
core->board.tuner_type);
{
switch (core->boardnr) {
case CX88_BOARD_HAUPPAUGE_HVR1300:
- /* Bring the 702 demod up before i2c scanning/attach or devices are hidden */
- /* We leave here with the 702 on the bus */
- cx_write(MO_GP0_IO, 0x0000e780);
+ /*
+ * Bring the 702 demod up before i2c scanning/attach or devices are hidden
+ * We leave here with the 702 on the bus
+ *
+ * "reset the IR receiver on GPIO[3]"
+ * Reported by Mike Crash <mike AT mikecrash.com>
+ */
+ cx_write(MO_GP0_IO, 0x0000ef88);
udelay(1000);
- cx_clear(MO_GP0_IO, 0x00000080);
+ cx_clear(MO_GP0_IO, 0x00000088);
udelay(50);
- cx_set(MO_GP0_IO, 0x00000080); /* 702 out of reset */
+ cx_set(MO_GP0_IO, 0x00000088); /* 702 out of reset */
udelay(1000);
break;
- case CX88_BOARD_DVICO_FUSIONHDTV_7_GOLD:
+
+ case CX88_BOARD_PROLINK_PV_GLOBAL_XTREME:
+ case CX88_BOARD_PROLINK_PV_8000GT:
+ cx_write(MO_GP2_IO, 0xcf7);
+ mdelay(50);
+ cx_write(MO_GP2_IO, 0xef5);
+ mdelay(50);
+ cx_write(MO_GP2_IO, 0xcf7);
+ msleep(10);
+ break;
+
+ case CX88_BOARD_DVICO_FUSIONHDTV_7_GOLD:
/* Enable the xc5000 tuner */
cx_set(MO_GP0_IO, 0x00001010);
break;
+
+ case CX88_BOARD_HAUPPAUGE_HVR3000:
+ case CX88_BOARD_HAUPPAUGE_HVR4000:
+ /* Init GPIO */
+ cx_write(MO_GP0_IO, core->board.input[0].gpio0);
+ udelay(1000);
+ cx_clear(MO_GP0_IO, 0x00000080);
+ udelay(50);
+ cx_set(MO_GP0_IO, 0x00000080); /* 702 out of reset */
+ udelay(1000);
+ break;
}
}
+/*
+ * Sets board-dependent xc3028 configuration
+ */
+void cx88_setup_xc3028(struct cx88_core *core, struct xc2028_ctrl *ctl)
+{
+ memset(ctl, 0, sizeof(*ctl));
+
+ ctl->fname = XC2028_DEFAULT_FIRMWARE;
+ ctl->max_len = 64;
+
+ switch (core->boardnr) {
+ case CX88_BOARD_POWERCOLOR_REAL_ANGEL:
+ /* Now works with firmware version 2.7 */
+ if (core->i2c_algo.udelay < 16)
+ core->i2c_algo.udelay = 16;
+ break;
+ case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO:
+ ctl->demod = XC3028_FE_ZARLINK456;
+ break;
+ case CX88_BOARD_KWORLD_ATSC_120:
+ case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO:
+ ctl->demod = XC3028_FE_OREN538;
+ break;
+ case CX88_BOARD_PROLINK_PV_GLOBAL_XTREME:
+ case CX88_BOARD_PROLINK_PV_8000GT:
+ /*
+ * Those boards uses non-MTS firmware
+ */
+ break;
+ case CX88_BOARD_PINNACLE_HYBRID_PCTV:
+ ctl->demod = XC3028_FE_ZARLINK456;
+ ctl->mts = 1;
+ break;
+ default:
+ ctl->demod = XC3028_FE_OREN538;
+ ctl->mts = 1;
+ }
+}
+EXPORT_SYMBOL_GPL(cx88_setup_xc3028);
+
static void cx88_card_setup(struct cx88_core *core)
{
static u8 eeprom[256];
+ struct tuner_setup tun_setup;
+ unsigned int mode_mask = T_RADIO |
+ T_ANALOG_TV |
+ T_DIGITAL_TV;
+
+ memset(&tun_setup, 0, sizeof(tun_setup));
if (0 == core->i2c_rc) {
core->i2c_client.addr = 0xa0 >> 1;
- tveeprom_read(&core->i2c_client,eeprom,sizeof(eeprom));
+ tveeprom_read(&core->i2c_client, eeprom, sizeof(eeprom));
}
switch (core->boardnr) {
case CX88_BOARD_HAUPPAUGE:
case CX88_BOARD_HAUPPAUGE_ROSLYN:
if (0 == core->i2c_rc)
- hauppauge_eeprom(core,eeprom+8);
+ hauppauge_eeprom(core, eeprom+8);
break;
case CX88_BOARD_GDI:
if (0 == core->i2c_rc)
- gdi_eeprom(core,eeprom);
+ gdi_eeprom(core, eeprom);
break;
case CX88_BOARD_WINFAST2000XP_EXPERT:
if (0 == core->i2c_rc)
- leadtek_eeprom(core,eeprom);
+ leadtek_eeprom(core, eeprom);
break;
case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1:
case CX88_BOARD_HAUPPAUGE_NOVASE2_S1:
case CX88_BOARD_HAUPPAUGE_HVR1100LP:
case CX88_BOARD_HAUPPAUGE_HVR3000:
case CX88_BOARD_HAUPPAUGE_HVR1300:
+ case CX88_BOARD_HAUPPAUGE_HVR4000:
+ case CX88_BOARD_HAUPPAUGE_HVR4000LITE:
if (0 == core->i2c_rc)
- hauppauge_eeprom(core,eeprom);
+ hauppauge_eeprom(core, eeprom);
break;
case CX88_BOARD_KWORLD_DVBS_100:
cx_write(MO_GP0_IO, 0x000007f8);
tea5767_cfg.priv = &ctl;
cx88_call_i2c_clients(core, TUNER_SET_CONFIG, &tea5767_cfg);
+ break;
}
+ case CX88_BOARD_TEVII_S420:
+ case CX88_BOARD_TEVII_S460:
+ case CX88_BOARD_OMICOM_SS4_PCI:
+ case CX88_BOARD_TBS_8920:
+ case CX88_BOARD_PROF_7300:
+ cx_write(MO_SRST_IO, 0);
+ msleep(100);
+ cx_write(MO_SRST_IO, 1);
+ msleep(100);
+ break;
+ } /*end switch() */
+
+
+ /* Setup tuners */
+ if ((core->board.radio_type != UNSET)) {
+ tun_setup.mode_mask = T_RADIO;
+ tun_setup.type = core->board.radio_type;
+ tun_setup.addr = core->board.radio_addr;
+ tun_setup.tuner_callback = cx88_tuner_callback;
+ cx88_call_i2c_clients(core, TUNER_SET_TYPE_ADDR, &tun_setup);
+ mode_mask &= ~T_RADIO;
+ }
+
+ if (core->board.tuner_type != TUNER_ABSENT) {
+ tun_setup.mode_mask = mode_mask;
+ tun_setup.type = core->board.tuner_type;
+ tun_setup.addr = core->board.tuner_addr;
+ tun_setup.tuner_callback = cx88_tuner_callback;
+
+ cx88_call_i2c_clients(core, TUNER_SET_TYPE_ADDR, &tun_setup);
+ }
+
+ if (core->board.tda9887_conf) {
+ struct v4l2_priv_tun_config tda9887_cfg;
+
+ tda9887_cfg.tuner = TUNER_TDA9887;
+ tda9887_cfg.priv = &core->board.tda9887_conf;
+
+ cx88_call_i2c_clients(core, TUNER_SET_CONFIG, &tda9887_cfg);
}
if (core->board.tuner_type == TUNER_XC2028) {
struct v4l2_priv_tun_config xc2028_cfg;
struct xc2028_ctrl ctl;
- memset(&xc2028_cfg, 0, sizeof(xc2028_cfg));
- memset(&ctl, 0, sizeof(ctl));
-
- ctl.fname = XC2028_DEFAULT_FIRMWARE;
- ctl.max_len = 64;
-
- switch (core->boardnr) {
- case CX88_BOARD_POWERCOLOR_REAL_ANGEL:
- /* Doesn't work with firmware version 2.7 */
- ctl.fname = "xc3028-v25.fw";
- break;
- case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO:
- ctl.scode_table = XC3028_FE_ZARLINK456;
- break;
- case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO:
- ctl.demod = XC3028_FE_OREN538;
- break;
- default:
- ctl.demod = XC3028_FE_OREN538;
- ctl.mts = 1;
- }
+ /* Fills device-dependent initialization parameters */
+ cx88_setup_xc3028(core, &ctl);
+ /* Sends parameters to xc2028/3028 tuner */
+ memset(&xc2028_cfg, 0, sizeof(xc2028_cfg));
xc2028_cfg.tuner = TUNER_XC2028;
xc2028_cfg.priv = &ctl;
-
info_printk(core, "Asking xc2028/3028 to load firmware %s\n",
ctl.fname);
cx88_call_i2c_clients(core, TUNER_SET_CONFIG, &xc2028_cfg);
}
+ cx88_call_i2c_clients (core, TUNER_SET_STANDBY, NULL);
}
/* ------------------------------------------------------------------ */
memcpy(&core->board, &cx88_boards[core->boardnr], sizeof(core->board));
- info_printk(core, "subsystem: %04x:%04x, board: %s [card=%d,%s]\n",
+ if (!core->board.num_frontends && (core->board.mpeg & CX88_MPEG_DVB))
+ core->board.num_frontends = 1;
+
+ info_printk(core, "subsystem: %04x:%04x, board: %s [card=%d,%s], frontend(s): %d\n",
pci->subsystem_vendor, pci->subsystem_device, core->board.name,
core->boardnr, card[core->nr] == core->boardnr ?
- "insmod option" : "autodetected");
+ "insmod option" : "autodetected",
+ core->board.num_frontends);
if (tuner[core->nr] != UNSET)
core->board.tuner_type = tuner[core->nr];
if (TUNER_ABSENT != core->board.tuner_type)
request_module("tuner");
- cx88_call_i2c_clients (core, TUNER_SET_STANDBY, NULL);
cx88_card_setup(core);
cx88_ir_init(core, pci);
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff