#include <linux/delay.h>
#include "cx88.h"
+#include "tea5767.h"
+
+static unsigned int tuner[] = {[0 ... (CX88_MAXBOARDS - 1)] = UNSET };
+static unsigned int radio[] = {[0 ... (CX88_MAXBOARDS - 1)] = UNSET };
+static unsigned int card[] = {[0 ... (CX88_MAXBOARDS - 1)] = UNSET };
+
+module_param_array(tuner, int, NULL, 0444);
+module_param_array(radio, int, NULL, 0444);
+module_param_array(card, int, NULL, 0444);
+
+MODULE_PARM_DESC(tuner,"tuner type");
+MODULE_PARM_DESC(radio,"radio tuner type");
+MODULE_PARM_DESC(card,"card type");
+
+static unsigned int latency = UNSET;
+module_param(latency,int,0444);
+MODULE_PARM_DESC(latency,"pci latency timer");
+
+#define info_printk(core, fmt, arg...) \
+ printk(KERN_INFO "%s: " fmt, core->name , ## arg)
+
+#define warn_printk(core, fmt, arg...) \
+ printk(KERN_WARNING "%s: " fmt, core->name , ## arg)
+
+#define err_printk(core, fmt, arg...) \
+ printk(KERN_ERR "%s: " fmt, core->name , ## arg)
+
/* ------------------------------------------------------------------ */
/* board config info */
-struct cx88_board cx88_boards[] = {
+/* If radio_type !=UNSET, radio_addr should be specified
+ */
+
+static const struct cx88_board cx88_boards[] = {
[CX88_BOARD_UNKNOWN] = {
.name = "UNKNOWN/GENERIC",
.tuner_type = UNSET,
}},
.radio = {
.type = CX88_RADIO,
+ .vmux = 3,
+ .gpio0 = 0x000040bf,
+ .gpio1 = 0x000080c0,
+ .gpio2 = 0x0000ff20,
},
},
[CX88_BOARD_WINFAST_DV2000] = {
.type = CX88_VMUX_TELEVISION,
.vmux = 0,
.gpio0 = 0x0000bde2,
- .extadc = 1,
+ .audioroute = 1,
},{
.type = CX88_VMUX_COMPOSITE1,
.vmux = 1,
.gpio0 = 0x0000bde6,
- .extadc = 1,
+ .audioroute = 1,
},{
.type = CX88_VMUX_SVIDEO,
.vmux = 2,
.gpio0 = 0x0000bde6,
- .extadc = 1,
+ .audioroute = 1,
}},
.radio = {
.type = CX88_RADIO,
.gpio0 = 0x0000bd62,
- .extadc = 1,
+ .audioroute = 1,
},
.mpeg = CX88_MPEG_BLACKBIRD,
},
.type = CX88_VMUX_SVIDEO,
.vmux = 2,
.gpio0 = 0x0000fde6, // 0x0000fda6 L,R RCA audio in?
- .extadc = 1,
+ .audioroute = 1,
}},
.radio = {
.type = CX88_RADIO,
.input = {{
.type = CX88_VMUX_TELEVISION,
.vmux = 0,
- .extadc = 1,
+ .audioroute = 1,
}},
.mpeg = CX88_MPEG_BLACKBIRD,
},
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.tda9887_conf = TDA9887_PRESENT,
+ /* GPIO[2] = audio source for analog audio out connector
+ * 0 = analog audio input connector
+ * 1 = CX88 audio DACs
+ *
+ * GPIO[7] = input to CX88's audio/chroma ADC
+ * 0 = FM 10.7 MHz IF
+ * 1 = Sound 4.5 MHz IF
+ *
+ * GPIO[1,5,6] = Oren 51132 pins 27,35,28 respectively
+ *
+ * GPIO[16] = Remote control input
+ */
.input = {{
.type = CX88_VMUX_TELEVISION,
.vmux = 0,
.gpio0 = 0x00008484,
- .gpio1 = 0x00000000,
- .gpio2 = 0x00000000,
- .gpio3 = 0x00000000,
},{
.type = CX88_VMUX_COMPOSITE1,
.vmux = 1,
.gpio0 = 0x00008400,
- .gpio1 = 0x00000000,
- .gpio2 = 0x00000000,
- .gpio3 = 0x00000000,
},{
.type = CX88_VMUX_SVIDEO,
.vmux = 2,
.gpio0 = 0x00008400,
- .gpio1 = 0x00000000,
- .gpio2 = 0x00000000,
- .gpio3 = 0x00000000,
}},
.radio = {
.type = CX88_RADIO,
- .vmux = 2,
- .gpio0 = 0x00008400,
- .gpio1 = 0x00000000,
- .gpio2 = 0x00000000,
- .gpio3 = 0x00000000,
+ .gpio0 = 0x00008404,
},
.mpeg = CX88_MPEG_DVB,
},
.type = CX88_VMUX_TELEVISION,
.vmux = 0,
.gpio0 = 0x00009d80,
- .extadc = 1,
+ .audioroute = 1,
},{
.type = CX88_VMUX_COMPOSITE1,
.vmux = 1,
.gpio0 = 0x00009d76,
- .extadc = 1,
+ .audioroute = 1,
},{
.type = CX88_VMUX_SVIDEO,
.vmux = 2,
.gpio0 = 0x00009d76,
- .extadc = 1,
+ .audioroute = 1,
}},
.radio = {
.type = CX88_RADIO,
.gpio0 = 0x00009d00,
- .extadc = 1,
+ .audioroute = 1,
},
.mpeg = CX88_MPEG_BLACKBIRD,
},
.input = {{
.type = CX88_VMUX_DVB,
.vmux = 0,
+ },{
+ .type = CX88_VMUX_COMPOSITE1,
+ .vmux = 2,
+ },{
+ .type = CX88_VMUX_SVIDEO,
+ .vmux = 2,
}},
.mpeg = CX88_MPEG_DVB,
},
.type = CX88_VMUX_COMPOSITE1,
.vmux = 0,
.gpio0 = 0x0000cd73,
- .extadc = 1,
+ .audioroute = 1,
},{
.type = CX88_VMUX_SVIDEO,
.vmux = 1,
.gpio0 = 0x0000cd73,
- .extadc = 1,
+ .audioroute = 1,
},{
.type = CX88_VMUX_TELEVISION,
.vmux = 3,
.gpio0 = 0x0000cdb3,
- .extadc = 1,
+ .audioroute = 1,
}},
.radio = {
.type = CX88_RADIO,
.vmux = 2,
.gpio0 = 0x0000cdf3,
- .extadc = 1,
+ .audioroute = 1,
},
.mpeg = CX88_MPEG_BLACKBIRD,
},
.input = {{
.type = CX88_VMUX_DVB,
.vmux = 0,
+ },{
+ .type = CX88_VMUX_COMPOSITE1,
+ .vmux = 1,
+ },{
+ .type = CX88_VMUX_SVIDEO,
+ .vmux = 2,
}},
.mpeg = CX88_MPEG_DVB,
},
.type = CX88_VMUX_COMPOSITE1,
.vmux = 1,
.gpio0 = 0x3de6,
- .extadc = 1,
+ .audioroute = 1,
},{
.type = CX88_VMUX_SVIDEO,
.vmux = 2,
.gpio0 = 0x3de6,
- .extadc = 1,
+ .audioroute = 1,
}},
.radio = {
.type = CX88_RADIO,
.mpeg = CX88_MPEG_DVB,
},
[CX88_BOARD_HAUPPAUGE_HVR3000] = {
- /* FIXME: Add dvb & radio support */
.name = "Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T",
.tuner_type = TUNER_PHILIPS_FMD1216ME_MK3,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.tda9887_conf = TDA9887_PRESENT,
+ .audio_chip = V4L2_IDENT_WM8775,
.input = {{
.type = CX88_VMUX_TELEVISION,
.vmux = 0,
.gpio0 = 0x84bf,
+ /* 1: TV Audio / FM Mono */
+ .audioroute = 1,
},{
.type = CX88_VMUX_COMPOSITE1,
.vmux = 1,
.gpio0 = 0x84bf,
+ /* 2: Line-In */
+ .audioroute = 2,
},{
.type = CX88_VMUX_SVIDEO,
.vmux = 2,
.gpio0 = 0x84bf,
+ /* 2: Line-In */
+ .audioroute = 2,
}},
+ .radio = {
+ .type = CX88_RADIO,
+ .gpio0 = 0x84bf,
+ /* 4: FM Stereo (untested) */
+ .audioroute = 8,
+ },
.mpeg = CX88_MPEG_DVB,
+ .num_frontends = 2,
},
[CX88_BOARD_NORWOOD_MICRO] = {
.name = "Norwood Micro TV Tuner",
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.tda9887_conf = TDA9887_PRESENT,
- .audio_chip = AUDIO_CHIP_WM8775,
+ .audio_chip = V4L2_IDENT_WM8775,
+ /*
+ * gpio0 as reported by Mike Crash <mike AT mikecrash.com>
+ */
.input = {{
.type = CX88_VMUX_TELEVISION,
.vmux = 0,
- .gpio0 = 0xe780,
- .extadc = 1,
+ .gpio0 = 0xef88,
+ /* 1: TV Audio / FM Mono */
+ .audioroute = 1,
},{
.type = CX88_VMUX_COMPOSITE1,
.vmux = 1,
- .gpio0 = 0xe780,
- .extadc = 1,
+ .gpio0 = 0xef88,
+ /* 2: Line-In */
+ .audioroute = 2,
},{
.type = CX88_VMUX_SVIDEO,
.vmux = 2,
- .gpio0 = 0xe780,
- .extadc = 1,
+ .gpio0 = 0xef88,
+ /* 2: Line-In */
+ .audioroute = 2,
}},
- /* fixme: Add radio support */
.mpeg = CX88_MPEG_DVB | CX88_MPEG_BLACKBIRD,
+ .radio = {
+ .type = CX88_RADIO,
+ .gpio0 = 0xef88,
+ /* 4: FM Stereo (untested) */
+ .audioroute = 8,
+ },
+ },
+ [CX88_BOARD_ADSTECH_PTV_390] = {
+ .name = "ADS Tech Instant Video PCI",
+ .tuner_type = TUNER_ABSENT,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .input = {{
+ .type = CX88_VMUX_DEBUG,
+ .vmux = 3,
+ .gpio0 = 0x04ff,
+ },{
+ .type = CX88_VMUX_COMPOSITE1,
+ .vmux = 1,
+ .gpio0 = 0x07fa,
+ },{
+ .type = CX88_VMUX_SVIDEO,
+ .vmux = 2,
+ .gpio0 = 0x07fa,
+ }},
+ },
+ [CX88_BOARD_PINNACLE_PCTV_HD_800i] = {
+ .name = "Pinnacle PCTV HD 800i",
+ .tuner_type = TUNER_XC5000,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .input = {{
+ .type = CX88_VMUX_TELEVISION,
+ .vmux = 0,
+ .gpio0 = 0x04fb,
+ .gpio1 = 0x10ff,
+ },{
+ .type = CX88_VMUX_COMPOSITE1,
+ .vmux = 1,
+ .gpio0 = 0x04fb,
+ .gpio1 = 0x10ef,
+ .audioroute = 1,
+ },{
+ .type = CX88_VMUX_SVIDEO,
+ .vmux = 2,
+ .gpio0 = 0x04fb,
+ .gpio1 = 0x10ef,
+ .audioroute = 1,
+ }},
+ .mpeg = CX88_MPEG_DVB,
+ },
+ [CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO] = {
+ .name = "DViCO FusionHDTV 5 PCI nano",
+ /* xc3008 tuner, digital only for now */
+ .tuner_type = TUNER_ABSENT,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .input = {{
+ .type = CX88_VMUX_TELEVISION,
+ .vmux = 0,
+ .gpio0 = 0x000027df, /* Unconfirmed */
+ }, {
+ .type = CX88_VMUX_COMPOSITE1,
+ .vmux = 1,
+ .gpio0 = 0x000027df, /* Unconfirmed */
+ .audioroute = 1,
+ }, {
+ .type = CX88_VMUX_SVIDEO,
+ .vmux = 2,
+ .gpio0 = 0x000027df, /* Unconfirmed */
+ .audioroute = 1,
+ } },
+ .mpeg = CX88_MPEG_DVB,
+ },
+ [CX88_BOARD_PINNACLE_HYBRID_PCTV] = {
+ .name = "Pinnacle Hybrid PCTV",
+ .tuner_type = TUNER_XC2028,
+ .tuner_addr = 0x61,
+ .radio_type = TUNER_XC2028,
+ .radio_addr = 0x61,
+ .input = { {
+ .type = CX88_VMUX_TELEVISION,
+ .vmux = 0,
+ .gpio0 = 0x004ff,
+ .gpio1 = 0x010ff,
+ .gpio2 = 0x00001,
+ }, {
+ .type = CX88_VMUX_COMPOSITE1,
+ .vmux = 1,
+ .gpio0 = 0x004fb,
+ .gpio1 = 0x010ef,
+ .audioroute = 1,
+ }, {
+ .type = CX88_VMUX_SVIDEO,
+ .vmux = 2,
+ .gpio0 = 0x004fb,
+ .gpio1 = 0x010ef,
+ .audioroute = 1,
+ } },
+ .radio = {
+ .type = CX88_RADIO,
+ .gpio0 = 0x004ff,
+ .gpio1 = 0x010ff,
+ .gpio2 = 0x0ff,
+ },
+ .mpeg = CX88_MPEG_DVB,
+ },
+ [CX88_BOARD_WINFAST_TV2000_XP_GLOBAL] = {
+ .name = "Winfast TV2000 XP Global",
+ .tuner_type = TUNER_XC2028,
+ .tuner_addr = 0x61,
+ .input = { {
+ .type = CX88_VMUX_TELEVISION,
+ .vmux = 0,
+ .gpio0 = 0x0400, /* pin 2:mute = 0 (off?) */
+ .gpio1 = 0x0000,
+ .gpio2 = 0x0800, /* pin 19:audio = 0 (tv) */
+
+ }, {
+ .type = CX88_VMUX_COMPOSITE1,
+ .vmux = 1,
+ .gpio0 = 0x0400, /* probably? or 0x0404 to turn mute on */
+ .gpio1 = 0x0000,
+ .gpio2 = 0x0808, /* pin 19:audio = 1 (line) */
+
+ }, {
+ .type = CX88_VMUX_SVIDEO,
+ .vmux = 2,
+ } },
+ .radio = {
+ .type = CX88_RADIO,
+ .gpio0 = 0x004ff,
+ .gpio1 = 0x010ff,
+ .gpio2 = 0x0ff,
+ },
+ },
+ [CX88_BOARD_POWERCOLOR_REAL_ANGEL] = {
+ .name = "PowerColor RA330", /* Long names may confuse LIRC. */
+ .tuner_type = TUNER_XC2028,
+ .tuner_addr = 0x61,
+ .input = { {
+ .type = CX88_VMUX_DEBUG,
+ .vmux = 3, /* Due to the way the cx88 driver is written, */
+ .gpio0 = 0x00ff, /* there is no way to deactivate audio pass- */
+ .gpio1 = 0xf39d, /* through without this entry. Furthermore, if */
+ .gpio3 = 0x0000, /* the TV mux entry is first, you get audio */
+ }, { /* from the tuner on boot for a little while. */
+ .type = CX88_VMUX_TELEVISION,
+ .vmux = 0,
+ .gpio0 = 0x00ff,
+ .gpio1 = 0xf35d,
+ .gpio3 = 0x0000,
+ }, {
+ .type = CX88_VMUX_COMPOSITE1,
+ .vmux = 1,
+ .gpio0 = 0x00ff,
+ .gpio1 = 0xf37d,
+ .gpio3 = 0x0000,
+ }, {
+ .type = CX88_VMUX_SVIDEO,
+ .vmux = 2,
+ .gpio0 = 0x000ff,
+ .gpio1 = 0x0f37d,
+ .gpio3 = 0x00000,
+ } },
+ .radio = {
+ .type = CX88_RADIO,
+ .gpio0 = 0x000ff,
+ .gpio1 = 0x0f35d,
+ .gpio3 = 0x00000,
+ },
+ },
+ [CX88_BOARD_GENIATECH_X8000_MT] = {
+ /* Also PowerColor Real Angel 330 and Geniatech X800 OEM */
+ .name = "Geniatech X8000-MT DVBT",
+ .tuner_type = TUNER_XC2028,
+ .tuner_addr = 0x61,
+ .input = { {
+ .type = CX88_VMUX_TELEVISION,
+ .vmux = 0,
+ .gpio0 = 0x00000000,
+ .gpio1 = 0x00e3e341,
+ .gpio2 = 0x00000000,
+ .gpio3 = 0x00000000,
+ }, {
+ .type = CX88_VMUX_COMPOSITE1,
+ .vmux = 1,
+ .gpio0 = 0x00000000,
+ .gpio1 = 0x00e3e361,
+ .gpio2 = 0x00000000,
+ .gpio3 = 0x00000000,
+ }, {
+ .type = CX88_VMUX_SVIDEO,
+ .vmux = 2,
+ .gpio0 = 0x00000000,
+ .gpio1 = 0x00e3e361,
+ .gpio2 = 0x00000000,
+ .gpio3 = 0x00000000,
+ } },
+ .radio = {
+ .type = CX88_RADIO,
+ .gpio0 = 0x00000000,
+ .gpio1 = 0x00e3e341,
+ .gpio2 = 0x00000000,
+ .gpio3 = 0x00000000,
+ },
+ .mpeg = CX88_MPEG_DVB,
+ },
+ [CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO] = {
+ .name = "DViCO FusionHDTV DVB-T PRO",
+ .tuner_type = TUNER_XC2028,
+ .tuner_addr = 0x61,
+ .radio_type = UNSET,
+ .radio_addr = ADDR_UNSET,
+ .input = { {
+ .type = CX88_VMUX_COMPOSITE1,
+ .vmux = 1,
+ .gpio0 = 0x000067df,
+ }, {
+ .type = CX88_VMUX_SVIDEO,
+ .vmux = 2,
+ .gpio0 = 0x000067df,
+ } },
+ .mpeg = CX88_MPEG_DVB,
+ },
+ [CX88_BOARD_DVICO_FUSIONHDTV_7_GOLD] = {
+ .name = "DViCO FusionHDTV 7 Gold",
+ .tuner_type = TUNER_XC5000,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .input = {{
+ .type = CX88_VMUX_TELEVISION,
+ .vmux = 0,
+ .gpio0 = 0x10df,
+ },{
+ .type = CX88_VMUX_COMPOSITE1,
+ .vmux = 1,
+ .gpio0 = 0x16d9,
+ },{
+ .type = CX88_VMUX_SVIDEO,
+ .vmux = 2,
+ .gpio0 = 0x16d9,
+ }},
+ .mpeg = CX88_MPEG_DVB,
+ },
+ [CX88_BOARD_PROLINK_PV_8000GT] = {
+ .name = "Prolink Pixelview MPEG 8000GT",
+ .tuner_type = TUNER_XC2028,
+ .tuner_addr = 0x61,
+ .input = { {
+ .type = CX88_VMUX_TELEVISION,
+ .vmux = 0,
+ .gpio0 = 0x0ff,
+ .gpio2 = 0x0cfb,
+ }, {
+ .type = CX88_VMUX_COMPOSITE1,
+ .vmux = 1,
+ .gpio2 = 0x0cfb,
+ }, {
+ .type = CX88_VMUX_SVIDEO,
+ .vmux = 2,
+ .gpio2 = 0x0cfb,
+ } },
+ .radio = {
+ .type = CX88_RADIO,
+ .gpio2 = 0x0cfb,
+ },
+ },
+ [CX88_BOARD_PROLINK_PV_GLOBAL_XTREME] = {
+ .name = "Prolink Pixelview Global Extreme",
+ .tuner_type = TUNER_XC2028,
+ .tuner_addr = 0x61,
+ .input = { {
+ .type = CX88_VMUX_TELEVISION,
+ .vmux = 0,
+ .gpio0 = 0x04fb,
+ .gpio1 = 0x04080,
+ .gpio2 = 0x0cf7,
+ }, {
+ .type = CX88_VMUX_COMPOSITE1,
+ .vmux = 1,
+ .gpio0 = 0x04fb,
+ .gpio1 = 0x04080,
+ .gpio2 = 0x0cfb,
+ }, {
+ .type = CX88_VMUX_SVIDEO,
+ .vmux = 2,
+ .gpio0 = 0x04fb,
+ .gpio1 = 0x04080,
+ .gpio2 = 0x0cfb,
+ } },
+ .radio = {
+ .type = CX88_RADIO,
+ .gpio0 = 0x04ff,
+ .gpio1 = 0x04080,
+ .gpio2 = 0x0cf7,
+ },
+ },
+ /* Both radio, analog and ATSC work with this board.
+ However, for analog to work, s5h1409 gate should be open,
+ otherwise, tuner-xc3028 won't be detected.
+ A proper fix require using the newer i2c methods to add
+ tuner-xc3028 without doing an i2c probe.
+ */
+ [CX88_BOARD_KWORLD_ATSC_120] = {
+ .name = "Kworld PlusTV HD PCI 120 (ATSC 120)",
+ .tuner_type = TUNER_XC2028,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .input = { {
+ .type = CX88_VMUX_TELEVISION,
+ .vmux = 0,
+ .gpio0 = 0x000000ff,
+ .gpio1 = 0x0000f35d,
+ .gpio2 = 0x00000000,
+ }, {
+ .type = CX88_VMUX_COMPOSITE1,
+ .vmux = 1,
+ .gpio0 = 0x000000ff,
+ .gpio1 = 0x0000f37e,
+ .gpio2 = 0x00000000,
+ }, {
+ .type = CX88_VMUX_SVIDEO,
+ .vmux = 2,
+ .gpio0 = 0x000000ff,
+ .gpio1 = 0x0000f37e,
+ .gpio2 = 0x00000000,
+ } },
+ .radio = {
+ .type = CX88_RADIO,
+ .gpio0 = 0x000000ff,
+ .gpio1 = 0x0000f35d,
+ .gpio2 = 0x00000000,
+ },
+ .mpeg = CX88_MPEG_DVB,
+ },
+ [CX88_BOARD_HAUPPAUGE_HVR4000] = {
+ .name = "Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid",
+ .tuner_type = TUNER_PHILIPS_FMD1216ME_MK3,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .tda9887_conf = TDA9887_PRESENT,
+ .audio_chip = V4L2_IDENT_WM8775,
+ /*
+ * GPIO0 (WINTV2000)
+ *
+ * Analogue SAT DVB-T
+ * Antenna 0xc4bf 0xc4bb
+ * Composite 0xc4bf 0xc4bb
+ * S-Video 0xc4bf 0xc4bb
+ * Composite1 0xc4ff 0xc4fb
+ * S-Video1 0xc4ff 0xc4fb
+ *
+ * BIT VALUE FUNCTION GP{x}_IO
+ * 0 1 I:?
+ * 1 1 I:?
+ * 2 1 O:MPEG PORT 0=DVB-T 1=DVB-S
+ * 3 1 I:?
+ * 4 1 I:?
+ * 5 1 I:?
+ * 6 0 O:INPUT SELECTOR 0=INTERNAL 1=EXPANSION
+ * 7 1 O:DVB-T DEMOD RESET LOW
+ *
+ * BIT VALUE FUNCTION GP{x}_OE
+ * 8 0 I
+ * 9 0 I
+ * a 1 O
+ * b 0 I
+ * c 0 I
+ * d 0 I
+ * e 1 O
+ * f 1 O
+ *
+ * WM8775 ADC
+ *
+ * 1: TV Audio / FM Mono
+ * 2: Line-In
+ * 3: Line-In Expansion
+ * 4: FM Stereo
+ */
+ .input = {{
+ .type = CX88_VMUX_TELEVISION,
+ .vmux = 0,
+ .gpio0 = 0xc4bf,
+ /* 1: TV Audio / FM Mono */
+ .audioroute = 1,
+ }, {
+ .type = CX88_VMUX_COMPOSITE1,
+ .vmux = 1,
+ .gpio0 = 0xc4bf,
+ /* 2: Line-In */
+ .audioroute = 2,
+ }, {
+ .type = CX88_VMUX_SVIDEO,
+ .vmux = 2,
+ .gpio0 = 0xc4bf,
+ /* 2: Line-In */
+ .audioroute = 2,
+ } },
+ .radio = {
+ .type = CX88_RADIO,
+ .gpio0 = 0xc4bf,
+ /* 4: FM Stereo */
+ .audioroute = 8,
+ },
+ .mpeg = CX88_MPEG_DVB,
+ .num_frontends = 2,
+ },
+ [CX88_BOARD_HAUPPAUGE_HVR4000LITE] = {
+ .name = "Hauppauge WinTV-HVR4000(Lite) DVB-S/S2",
+ .tuner_type = UNSET,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .input = {{
+ .type = CX88_VMUX_DVB,
+ .vmux = 0,
+ } },
+ .mpeg = CX88_MPEG_DVB,
+ },
+ [CX88_BOARD_TEVII_S420] = {
+ .name = "TeVii S420 DVB-S",
+ .tuner_type = UNSET,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .input = {{
+ .type = CX88_VMUX_DVB,
+ .vmux = 0,
+ } },
+ .mpeg = CX88_MPEG_DVB,
+ },
+ [CX88_BOARD_TEVII_S460] = {
+ .name = "TeVii S460 DVB-S/S2",
+ .tuner_type = UNSET,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .input = {{
+ .type = CX88_VMUX_DVB,
+ .vmux = 0,
+ } },
+ .mpeg = CX88_MPEG_DVB,
+ },
+ [CX88_BOARD_OMICOM_SS4_PCI] = {
+ .name = "Omicom SS4 DVB-S/S2 PCI",
+ .tuner_type = UNSET,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .input = {{
+ .type = CX88_VMUX_DVB,
+ .vmux = 0,
+ } },
+ .mpeg = CX88_MPEG_DVB,
+ },
+ [CX88_BOARD_TBS_8920] = {
+ .name = "TBS 8920 DVB-S/S2",
+ .tuner_type = TUNER_ABSENT,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .input = {{
+ .type = CX88_VMUX_DVB,
+ .vmux = 1,
+ } },
+ .mpeg = CX88_MPEG_DVB,
+ },
+ [CX88_BOARD_PROF_7300] = {
+ .name = "PROF 7300 DVB-S/S2",
+ .tuner_type = UNSET,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .input = {{
+ .type = CX88_VMUX_DVB,
+ .vmux = 0,
+ } },
+ .mpeg = CX88_MPEG_DVB,
},
};
-const unsigned int cx88_bcount = ARRAY_SIZE(cx88_boards);
/* ------------------------------------------------------------------ */
/* PCI subsystem IDs */
-struct cx88_subid cx88_subids[] = {
+static const struct cx88_subid cx88_subids[] = {
{
.subvendor = 0x0070,
.subdevice = 0x3400,
.subdevice = 0xdb11,
.card = CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PLUS,
/* Re-branded DViCO: UltraView DVB-T Plus */
- },{
+ }, {
+ .subvendor = 0x18ac,
+ .subdevice = 0xdb30,
+ .card = CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO,
+ }, {
.subvendor = 0x17de,
.subdevice = 0x0840,
- .card = CX88_BOARD_KWORLD_HARDWARE_MPEG_TV_XPERT,
- },{
- .subvendor = 0x1421,
- .subdevice = 0x0305,
+ .card = CX88_BOARD_KWORLD_HARDWARE_MPEG_TV_XPERT,
+ },{
+ .subvendor = 0x1421,
+ .subdevice = 0x0305,
.card = CX88_BOARD_KWORLD_HARDWARE_MPEG_TV_XPERT,
},{
.subvendor = 0x18ac,
.subvendor = 0x0070,
.subdevice = 0x1402,
.card = CX88_BOARD_HAUPPAUGE_HVR3000,
+ },{
+ .subvendor = 0x1421,
+ .subdevice = 0x0341, /* ADS Tech InstantTV DVB-S */
+ .card = CX88_BOARD_KWORLD_DVBS_100,
+ },{
+ .subvendor = 0x1421,
+ .subdevice = 0x0390,
+ .card = CX88_BOARD_ADSTECH_PTV_390,
+ },{
+ .subvendor = 0x11bd,
+ .subdevice = 0x0051,
+ .card = CX88_BOARD_PINNACLE_PCTV_HD_800i,
+ }, {
+ .subvendor = 0x18ac,
+ .subdevice = 0xd530,
+ .card = CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO,
+ }, {
+ .subvendor = 0x12ab,
+ .subdevice = 0x1788,
+ .card = CX88_BOARD_PINNACLE_HYBRID_PCTV,
+ }, {
+ .subvendor = 0x14f1,
+ .subdevice = 0xea3d,
+ .card = CX88_BOARD_POWERCOLOR_REAL_ANGEL,
+ }, {
+ .subvendor = 0x107d,
+ .subdevice = 0x6f18,
+ .card = CX88_BOARD_WINFAST_TV2000_XP_GLOBAL,
+ }, {
+ .subvendor = 0x14f1,
+ .subdevice = 0x8852,
+ .card = CX88_BOARD_GENIATECH_X8000_MT,
+ }, {
+ .subvendor = 0x18ac,
+ .subdevice = 0xd610,
+ .card = CX88_BOARD_DVICO_FUSIONHDTV_7_GOLD,
+ }, {
+ .subvendor = 0x1554,
+ .subdevice = 0x4935,
+ .card = CX88_BOARD_PROLINK_PV_8000GT,
+ }, {
+ .subvendor = 0x1554,
+ .subdevice = 0x4976,
+ .card = CX88_BOARD_PROLINK_PV_GLOBAL_XTREME,
+ }, {
+ .subvendor = 0x17de,
+ .subdevice = 0x08c1,
+ .card = CX88_BOARD_KWORLD_ATSC_120,
+ }, {
+ .subvendor = 0x0070,
+ .subdevice = 0x6900,
+ .card = CX88_BOARD_HAUPPAUGE_HVR4000,
+ }, {
+ .subvendor = 0x0070,
+ .subdevice = 0x6904,
+ .card = CX88_BOARD_HAUPPAUGE_HVR4000,
+ }, {
+ .subvendor = 0x0070,
+ .subdevice = 0x6902,
+ .card = CX88_BOARD_HAUPPAUGE_HVR4000,
+ }, {
+ .subvendor = 0x0070,
+ .subdevice = 0x6905,
+ .card = CX88_BOARD_HAUPPAUGE_HVR4000LITE,
+ }, {
+ .subvendor = 0x0070,
+ .subdevice = 0x6906,
+ .card = CX88_BOARD_HAUPPAUGE_HVR4000LITE,
+ }, {
+ .subvendor = 0xd420,
+ .subdevice = 0x9022,
+ .card = CX88_BOARD_TEVII_S420,
+ }, {
+ .subvendor = 0xd460,
+ .subdevice = 0x9022,
+ .card = CX88_BOARD_TEVII_S460,
+ }, {
+ .subvendor = 0xA044,
+ .subdevice = 0x2011,
+ .card = CX88_BOARD_OMICOM_SS4_PCI,
+ }, {
+ .subvendor = 0x8920,
+ .subdevice = 0x8888,
+ .card = CX88_BOARD_TBS_8920,
+ }, {
+ .subvendor = 0xB033,
+ .subdevice = 0x3033,
+ .card = CX88_BOARD_PROF_7300,
},
};
-const unsigned int cx88_idcount = ARRAY_SIZE(cx88_subids);
/* ----------------------------------------------------------------------- */
/* some leadtek specific stuff */
if (eeprom_data[4] != 0x7d ||
eeprom_data[5] != 0x10 ||
eeprom_data[7] != 0x66) {
- printk(KERN_WARNING "%s: Leadtek eeprom invalid.\n",
- core->name);
+ warn_printk(core, "Leadtek eeprom invalid.\n");
return;
}
- core->has_radio = 1;
- core->tuner_type = (eeprom_data[6] == 0x13) ? 43 : 38;
+ core->board.tuner_type = (eeprom_data[6] == 0x13) ?
+ TUNER_PHILIPS_FM1236_MK3 : TUNER_PHILIPS_FM1216ME_MK3;
- printk(KERN_INFO "%s: Leadtek Winfast 2000XP Expert config: "
- "tuner=%d, eeprom[0]=0x%02x\n",
- core->name, core->tuner_type, eeprom_data[0]);
+ info_printk(core, "Leadtek Winfast 2000XP Expert config: "
+ "tuner=%d, eeprom[0]=0x%02x\n",
+ core->board.tuner_type, eeprom_data[0]);
}
static void hauppauge_eeprom(struct cx88_core *core, u8 *eeprom_data)
struct tveeprom tv;
tveeprom_hauppauge_analog(&core->i2c_client, &tv, eeprom_data);
- core->tuner_type = tv.tuner_type;
+ core->board.tuner_type = tv.tuner_type;
core->tuner_formats = tv.tuner_formats;
- core->has_radio = tv.has_radio;
+ core->board.radio.type = tv.has_radio ? CX88_RADIO : 0;
/* Make sure we support the board model */
switch (tv.model)
case 14669: /* WinTV-HVR3000 (OEM, no IR, no b/panel video - Low profile) */
case 28552: /* WinTV-PVR 'Roslyn' (No IR) */
case 34519: /* WinTV-PCI-FM */
+ case 69009:
+ /* WinTV-HVR4000 (DVBS/S2/T, Video and IR, back panel inputs) */
+ case 69100: /* WinTV-HVR4000LITE (DVBS/S2, IR) */
+ case 69500: /* WinTV-HVR4000LITE (DVBS/S2, No IR) */
+ case 69559:
+ /* WinTV-HVR4000 (DVBS/S2/T, Video no IR, back panel inputs) */
+ case 69569: /* WinTV-HVR4000 (DVBS/S2/T, Video no IR) */
case 90002: /* Nova-T-PCI (9002) */
case 92001: /* Nova-S-Plus (Video and IR) */
case 92002: /* Nova-S-Plus (Video and IR) */
/* known */
break;
default:
- printk("%s: warning: unknown hauppauge model #%d\n",
- core->name, tv.model);
+ warn_printk(core, "warning: unknown hauppauge model #%d\n",
+ tv.model);
break;
}
- printk(KERN_INFO "%s: hauppauge eeprom: model=%d\n",
- core->name, tv.model);
+ info_printk(core, "hauppauge eeprom: model=%d\n", tv.model);
}
/* ----------------------------------------------------------------------- */
char *name = (eeprom_data[0x0d] < ARRAY_SIZE(gdi_tuner))
? gdi_tuner[eeprom_data[0x0d]].name : NULL;
- printk(KERN_INFO "%s: GDI: tuner=%s\n", core->name,
- name ? name : "unknown");
+ info_printk(core, "GDI: tuner=%s\n", name ? name : "unknown");
if (NULL == name)
return;
- core->tuner_type = gdi_tuner[eeprom_data[0x0d]].id;
- core->has_radio = gdi_tuner[eeprom_data[0x0d]].fm;
+ core->board.tuner_type = gdi_tuner[eeprom_data[0x0d]].id;
+ core->board.radio.type = gdi_tuner[eeprom_data[0x0d]].fm ?
+ CX88_RADIO : 0;
+}
+
+/* ------------------------------------------------------------------- */
+/* some Divco specific stuff */
+static int cx88_dvico_xc2028_callback(struct cx88_core *core,
+ int command, int arg)
+{
+ switch (command) {
+ case XC2028_TUNER_RESET:
+ switch (core->boardnr) {
+ case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO:
+ /* GPIO-4 xc3028 tuner */
+
+ cx_set(MO_GP0_IO, 0x00001000);
+ cx_clear(MO_GP0_IO, 0x00000010);
+ msleep(100);
+ cx_set(MO_GP0_IO, 0x00000010);
+ msleep(100);
+ break;
+ default:
+ cx_write(MO_GP0_IO, 0x101000);
+ mdelay(5);
+ cx_set(MO_GP0_IO, 0x101010);
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+
+/* ----------------------------------------------------------------------- */
+/* some Geniatech specific stuff */
+
+static int cx88_xc3028_geniatech_tuner_callback(struct cx88_core *core,
+ int command, int mode)
+{
+ switch (command) {
+ case XC2028_TUNER_RESET:
+ switch (INPUT(core->input).type) {
+ case CX88_RADIO:
+ break;
+ case CX88_VMUX_DVB:
+ cx_write(MO_GP1_IO, 0x030302);
+ mdelay(50);
+ break;
+ default:
+ cx_write(MO_GP1_IO, 0x030301);
+ mdelay(50);
+ }
+ cx_write(MO_GP1_IO, 0x101010);
+ mdelay(50);
+ cx_write(MO_GP1_IO, 0x101000);
+ mdelay(50);
+ cx_write(MO_GP1_IO, 0x101010);
+ mdelay(50);
+ return 0;
+ }
+ return -EINVAL;
+}
+
+/* ------------------------------------------------------------------- */
+/* some Divco specific stuff */
+static int cx88_pv_8000gt_callback(struct cx88_core *core,
+ int command, int arg)
+{
+ switch (command) {
+ case XC2028_TUNER_RESET:
+ cx_write(MO_GP2_IO, 0xcf7);
+ mdelay(50);
+ cx_write(MO_GP2_IO, 0xef5);
+ mdelay(50);
+ cx_write(MO_GP2_IO, 0xcf7);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
}
/* ----------------------------------------------------------------------- */
{ 0x03, 0x0C },
};
- for (i = 0; i < 13; i++) {
+ for (i = 0; i < ARRAY_SIZE(init_bufs); i++) {
msg.buf = init_bufs[i];
msg.len = (i != 12 ? 5 : 2);
err = i2c_transfer(&core->i2c_adap, &msg, 1);
if (err != 1) {
- printk("dvico_fusionhdtv_hybrid_init buf %d failed (err = %d)!\n", i, err);
+ warn_printk(core, "dvico_fusionhdtv_hybrid_init buf %d "
+ "failed (err = %d)!\n", i, err);
return;
}
}
}
+static int cx88_xc2028_tuner_callback(struct cx88_core *core,
+ int command, int arg)
+{
+ /* Board-specific callbacks */
+ switch (core->boardnr) {
+ case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL:
+ case CX88_BOARD_POWERCOLOR_REAL_ANGEL:
+ case CX88_BOARD_GENIATECH_X8000_MT:
+ case CX88_BOARD_KWORLD_ATSC_120:
+ return cx88_xc3028_geniatech_tuner_callback(core,
+ command, arg);
+ case CX88_BOARD_PROLINK_PV_8000GT:
+ case CX88_BOARD_PROLINK_PV_GLOBAL_XTREME:
+ return cx88_pv_8000gt_callback(core, command, arg);
+ case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO:
+ case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO:
+ return cx88_dvico_xc2028_callback(core, command, arg);
+ }
+
+ switch (command) {
+ case XC2028_TUNER_RESET:
+ switch (INPUT(core->input).type) {
+ case CX88_RADIO:
+ info_printk(core, "setting GPIO to radio!\n");
+ cx_write(MO_GP0_IO, 0x4ff);
+ mdelay(250);
+ cx_write(MO_GP2_IO, 0xff);
+ mdelay(250);
+ break;
+ case CX88_VMUX_DVB: /* Digital TV*/
+ default: /* Analog TV */
+ info_printk(core, "setting GPIO to TV!\n");
+ break;
+ }
+ cx_write(MO_GP1_IO, 0x101010);
+ mdelay(250);
+ cx_write(MO_GP1_IO, 0x101000);
+ mdelay(250);
+ cx_write(MO_GP1_IO, 0x101010);
+ mdelay(250);
+ return 0;
+ }
+ return -EINVAL;
+}
+
/* ----------------------------------------------------------------------- */
+/* Tuner callback function. Currently only needed for the Pinnacle *
+ * PCTV HD 800i with an xc5000 sillicon tuner. This is used for both *
+ * analog tuner attach (tuner-core.c) and dvb tuner attach (cx88-dvb.c) */
+
+static int cx88_xc5000_tuner_callback(struct cx88_core *core,
+ int command, int arg)
+{
+ switch (core->boardnr) {
+ case CX88_BOARD_PINNACLE_PCTV_HD_800i:
+ if (command == 0) { /* This is the reset command from xc5000 */
+ /* Reset XC5000 tuner via SYS_RSTO_pin */
+ cx_write(MO_SRST_IO, 0);
+ msleep(10);
+ cx_write(MO_SRST_IO, 1);
+ return 0;
+ } else {
+ err_printk(core, "xc5000: unknown tuner "
+ "callback command.\n");
+ return -EINVAL;
+ }
+ break;
+ case CX88_BOARD_DVICO_FUSIONHDTV_7_GOLD:
+ if (command == 0) { /* This is the reset command from xc5000 */
+ cx_clear(MO_GP0_IO, 0x00000010);
+ msleep(10);
+ cx_set(MO_GP0_IO, 0x00000010);
+ return 0;
+ } else {
+ printk(KERN_ERR
+ "xc5000: unknown tuner callback command.\n");
+ return -EINVAL;
+ }
+ break;
+ }
+ return 0; /* Should never be here */
+}
-void cx88_card_list(struct cx88_core *core, struct pci_dev *pci)
+int cx88_tuner_callback(void *priv, int component, int command, int arg)
+{
+ struct i2c_algo_bit_data *i2c_algo = priv;
+ struct cx88_core *core;
+
+ if (!i2c_algo) {
+ printk(KERN_ERR "cx88: Error - i2c private data undefined.\n");
+ return -EINVAL;
+ }
+
+ core = i2c_algo->data;
+
+ if (!core) {
+ printk(KERN_ERR "cx88: Error - device struct undefined.\n");
+ return -EINVAL;
+ }
+
+ if (component != DVB_FRONTEND_COMPONENT_TUNER)
+ return -EINVAL;
+
+ switch (core->board.tuner_type) {
+ case TUNER_XC2028:
+ info_printk(core, "Calling XC2028/3028 callback\n");
+ return cx88_xc2028_tuner_callback(core, command, arg);
+ case TUNER_XC5000:
+ info_printk(core, "Calling XC5000 callback\n");
+ return cx88_xc5000_tuner_callback(core, command, arg);
+ }
+ err_printk(core, "Error: Calling callback for tuner %d\n",
+ core->board.tuner_type);
+ return -EINVAL;
+}
+EXPORT_SYMBOL(cx88_tuner_callback);
+
+/* ----------------------------------------------------------------------- */
+
+static void cx88_card_list(struct cx88_core *core, struct pci_dev *pci)
{
int i;
if (0 == pci->subsystem_vendor &&
0 == pci->subsystem_device) {
- printk("%s: Your board has no valid PCI Subsystem ID and thus can't\n"
+ printk(KERN_ERR
+ "%s: Your board has no valid PCI Subsystem ID and thus can't\n"
"%s: be autodetected. Please pass card=<n> insmod option to\n"
"%s: workaround that. Redirect complaints to the vendor of\n"
"%s: the TV card. Best regards,\n"
"%s: -- tux\n",
core->name,core->name,core->name,core->name,core->name);
} else {
- printk("%s: Your board isn't known (yet) to the driver. You can\n"
+ printk(KERN_ERR
+ "%s: Your board isn't known (yet) to the driver. You can\n"
"%s: try to pick one of the existing card configs via\n"
"%s: card=<n> insmod option. Updating to the latest\n"
"%s: version might help as well.\n",
core->name,core->name,core->name,core->name);
}
- printk("%s: Here is a list of valid choices for the card=<n> insmod option:\n",
- core->name);
- for (i = 0; i < cx88_bcount; i++)
- printk("%s: card=%d -> %s\n",
+ err_printk(core, "Here is a list of valid choices for the card=<n> "
+ "insmod option:\n");
+ for (i = 0; i < ARRAY_SIZE(cx88_boards); i++)
+ printk(KERN_ERR "%s: card=%d -> %s\n",
core->name, i, cx88_boards[i].name);
}
-void cx88_card_setup_pre_i2c(struct cx88_core *core)
+static void cx88_card_setup_pre_i2c(struct cx88_core *core)
{
- switch (core->board) {
+ switch (core->boardnr) {
case CX88_BOARD_HAUPPAUGE_HVR1300:
- /* Bring the 702 demod up before i2c scanning/attach or devices are hidden */
- /* We leave here with the 702 on the bus */
- cx_write(MO_GP0_IO, 0x0000e780);
+ /*
+ * Bring the 702 demod up before i2c scanning/attach or devices are hidden
+ * We leave here with the 702 on the bus
+ *
+ * "reset the IR receiver on GPIO[3]"
+ * Reported by Mike Crash <mike AT mikecrash.com>
+ */
+ cx_write(MO_GP0_IO, 0x0000ef88);
+ udelay(1000);
+ cx_clear(MO_GP0_IO, 0x00000088);
+ udelay(50);
+ cx_set(MO_GP0_IO, 0x00000088); /* 702 out of reset */
+ udelay(1000);
+ break;
+
+ case CX88_BOARD_PROLINK_PV_GLOBAL_XTREME:
+ case CX88_BOARD_PROLINK_PV_8000GT:
+ cx_write(MO_GP2_IO, 0xcf7);
+ mdelay(50);
+ cx_write(MO_GP2_IO, 0xef5);
+ mdelay(50);
+ cx_write(MO_GP2_IO, 0xcf7);
+ msleep(10);
+ break;
+
+ case CX88_BOARD_DVICO_FUSIONHDTV_7_GOLD:
+ /* Enable the xc5000 tuner */
+ cx_set(MO_GP0_IO, 0x00001010);
+ break;
+
+ case CX88_BOARD_HAUPPAUGE_HVR3000:
+ case CX88_BOARD_HAUPPAUGE_HVR4000:
+ /* Init GPIO */
+ cx_write(MO_GP0_IO, core->board.input[0].gpio0);
udelay(1000);
cx_clear(MO_GP0_IO, 0x00000080);
udelay(50);
}
}
-void cx88_card_setup(struct cx88_core *core)
+/*
+ * Sets board-dependent xc3028 configuration
+ */
+void cx88_setup_xc3028(struct cx88_core *core, struct xc2028_ctrl *ctl)
+{
+ memset(ctl, 0, sizeof(*ctl));
+
+ ctl->fname = XC2028_DEFAULT_FIRMWARE;
+ ctl->max_len = 64;
+
+ switch (core->boardnr) {
+ case CX88_BOARD_POWERCOLOR_REAL_ANGEL:
+ /* Now works with firmware version 2.7 */
+ if (core->i2c_algo.udelay < 16)
+ core->i2c_algo.udelay = 16;
+ break;
+ case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO:
+ ctl->demod = XC3028_FE_ZARLINK456;
+ break;
+ case CX88_BOARD_KWORLD_ATSC_120:
+ case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO:
+ ctl->demod = XC3028_FE_OREN538;
+ break;
+ case CX88_BOARD_PROLINK_PV_GLOBAL_XTREME:
+ case CX88_BOARD_PROLINK_PV_8000GT:
+ /*
+ * Those boards uses non-MTS firmware
+ */
+ break;
+ case CX88_BOARD_PINNACLE_HYBRID_PCTV:
+ ctl->demod = XC3028_FE_ZARLINK456;
+ ctl->mts = 1;
+ break;
+ default:
+ ctl->demod = XC3028_FE_OREN538;
+ ctl->mts = 1;
+ }
+}
+EXPORT_SYMBOL_GPL(cx88_setup_xc3028);
+
+static void cx88_card_setup(struct cx88_core *core)
{
static u8 eeprom[256];
+ struct tuner_setup tun_setup;
+ unsigned int mode_mask = T_RADIO |
+ T_ANALOG_TV |
+ T_DIGITAL_TV;
+
+ memset(&tun_setup, 0, sizeof(tun_setup));
if (0 == core->i2c_rc) {
core->i2c_client.addr = 0xa0 >> 1;
- tveeprom_read(&core->i2c_client,eeprom,sizeof(eeprom));
+ tveeprom_read(&core->i2c_client, eeprom, sizeof(eeprom));
}
- switch (core->board) {
+ switch (core->boardnr) {
case CX88_BOARD_HAUPPAUGE:
case CX88_BOARD_HAUPPAUGE_ROSLYN:
if (0 == core->i2c_rc)
- hauppauge_eeprom(core,eeprom+8);
+ hauppauge_eeprom(core, eeprom+8);
break;
case CX88_BOARD_GDI:
if (0 == core->i2c_rc)
- gdi_eeprom(core,eeprom);
+ gdi_eeprom(core, eeprom);
break;
case CX88_BOARD_WINFAST2000XP_EXPERT:
if (0 == core->i2c_rc)
- leadtek_eeprom(core,eeprom);
+ leadtek_eeprom(core, eeprom);
break;
case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1:
case CX88_BOARD_HAUPPAUGE_NOVASE2_S1:
case CX88_BOARD_HAUPPAUGE_HVR1100LP:
case CX88_BOARD_HAUPPAUGE_HVR3000:
case CX88_BOARD_HAUPPAUGE_HVR1300:
+ case CX88_BOARD_HAUPPAUGE_HVR4000:
+ case CX88_BOARD_HAUPPAUGE_HVR4000LITE:
if (0 == core->i2c_rc)
- hauppauge_eeprom(core,eeprom);
+ hauppauge_eeprom(core, eeprom);
break;
case CX88_BOARD_KWORLD_DVBS_100:
cx_write(MO_GP0_IO, 0x000007f8);
cx_write(MO_GP1_IO, 0x00000001);
break;
+ case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO:
+ /* GPIO0:0 is hooked to demod reset */
+ /* GPIO0:4 is hooked to xc3028 reset */
+ cx_write(MO_GP0_IO, 0x00111100);
+ msleep(1);
+ cx_write(MO_GP0_IO, 0x00111111);
+ break;
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL:
/* GPIO0:6 is hooked to FX2 reset pin */
cx_set(MO_GP0_IO, 0x00004040);
msleep(1);
cx_set(MO_GP0_IO, 0x00000101);
if (0 == core->i2c_rc &&
- core->board == CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_HYBRID)
+ core->boardnr == CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_HYBRID)
dvico_fusionhdtv_hybrid_init(core);
break;
case CX88_BOARD_KWORLD_DVB_T:
if (0 == core->i2c_rc) {
/* enable tuner */
int i;
- static const u8 buffer [] = { 0x10,0x12,0x13,0x04,0x16,0x00,0x14,0x04,0x017,0x00 };
+ static const u8 buffer [][2] = {
+ {0x10,0x12},
+ {0x13,0x04},
+ {0x16,0x00},
+ {0x14,0x04},
+ {0x17,0x00}
+ };
core->i2c_client.addr = 0x0a;
- for (i = 0; i < 5; i++)
- if (2 != i2c_master_send(&core->i2c_client,&buffer[i*2],2))
- printk(KERN_WARNING "%s: Unable to enable tuner(%i).\n",
- core->name, i);
+ for (i = 0; i < ARRAY_SIZE(buffer); i++)
+ if (2 != i2c_master_send(&core->i2c_client,
+ buffer[i],2))
+ warn_printk(core, "Unable to enable "
+ "tuner(%i).\n", i);
}
break;
+ case CX88_BOARD_MSI_TVANYWHERE_MASTER:
+ {
+ struct v4l2_priv_tun_config tea5767_cfg;
+ struct tea5767_ctrl ctl;
+
+ memset(&ctl, 0, sizeof(ctl));
+
+ ctl.high_cut = 1;
+ ctl.st_noise = 1;
+ ctl.deemph_75 = 1;
+ ctl.xtal_freq = TEA5767_HIGH_LO_13MHz;
+
+ tea5767_cfg.tuner = TUNER_TEA5767;
+ tea5767_cfg.priv = &ctl;
+
+ cx88_call_i2c_clients(core, TUNER_SET_CONFIG, &tea5767_cfg);
+ break;
+ }
+ case CX88_BOARD_TEVII_S420:
+ case CX88_BOARD_TEVII_S460:
+ case CX88_BOARD_OMICOM_SS4_PCI:
+ case CX88_BOARD_TBS_8920:
+ case CX88_BOARD_PROF_7300:
+ cx_write(MO_SRST_IO, 0);
+ msleep(100);
+ cx_write(MO_SRST_IO, 1);
+ msleep(100);
+ break;
+ } /*end switch() */
+
+
+ /* Setup tuners */
+ if ((core->board.radio_type != UNSET)) {
+ tun_setup.mode_mask = T_RADIO;
+ tun_setup.type = core->board.radio_type;
+ tun_setup.addr = core->board.radio_addr;
+ tun_setup.tuner_callback = cx88_tuner_callback;
+ cx88_call_i2c_clients(core, TUNER_SET_TYPE_ADDR, &tun_setup);
+ mode_mask &= ~T_RADIO;
+ }
+
+ if (core->board.tuner_type != TUNER_ABSENT) {
+ tun_setup.mode_mask = mode_mask;
+ tun_setup.type = core->board.tuner_type;
+ tun_setup.addr = core->board.tuner_addr;
+ tun_setup.tuner_callback = cx88_tuner_callback;
+
+ cx88_call_i2c_clients(core, TUNER_SET_TYPE_ADDR, &tun_setup);
+ }
+
+ if (core->board.tda9887_conf) {
+ struct v4l2_priv_tun_config tda9887_cfg;
+
+ tda9887_cfg.tuner = TUNER_TDA9887;
+ tda9887_cfg.priv = &core->board.tda9887_conf;
+
+ cx88_call_i2c_clients(core, TUNER_SET_CONFIG, &tda9887_cfg);
}
- if (cx88_boards[core->board].radio.type == CX88_RADIO)
- core->has_radio = 1;
+
+ if (core->board.tuner_type == TUNER_XC2028) {
+ struct v4l2_priv_tun_config xc2028_cfg;
+ struct xc2028_ctrl ctl;
+
+ /* Fills device-dependent initialization parameters */
+ cx88_setup_xc3028(core, &ctl);
+
+ /* Sends parameters to xc2028/3028 tuner */
+ memset(&xc2028_cfg, 0, sizeof(xc2028_cfg));
+ xc2028_cfg.tuner = TUNER_XC2028;
+ xc2028_cfg.priv = &ctl;
+ info_printk(core, "Asking xc2028/3028 to load firmware %s\n",
+ ctl.fname);
+ cx88_call_i2c_clients(core, TUNER_SET_CONFIG, &xc2028_cfg);
+ }
+ cx88_call_i2c_clients (core, TUNER_SET_STANDBY, NULL);
}
/* ------------------------------------------------------------------ */
-EXPORT_SYMBOL(cx88_boards);
+static int cx88_pci_quirks(const char *name, struct pci_dev *pci)
+{
+ unsigned int lat = UNSET;
+ u8 ctrl = 0;
+ u8 value;
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- * kate: eol "unix"; indent-width 3; remove-trailing-space on; replace-trailing-space-save on; tab-width 8; replace-tabs off; space-indent off; mixed-indent off
- */
+ /* check pci quirks */
+ if (pci_pci_problems & PCIPCI_TRITON) {
+ printk(KERN_INFO "%s: quirk: PCIPCI_TRITON -- set TBFX\n",
+ name);
+ ctrl |= CX88X_EN_TBFX;
+ }
+ if (pci_pci_problems & PCIPCI_NATOMA) {
+ printk(KERN_INFO "%s: quirk: PCIPCI_NATOMA -- set TBFX\n",
+ name);
+ ctrl |= CX88X_EN_TBFX;
+ }
+ if (pci_pci_problems & PCIPCI_VIAETBF) {
+ printk(KERN_INFO "%s: quirk: PCIPCI_VIAETBF -- set TBFX\n",
+ name);
+ ctrl |= CX88X_EN_TBFX;
+ }
+ if (pci_pci_problems & PCIPCI_VSFX) {
+ printk(KERN_INFO "%s: quirk: PCIPCI_VSFX -- set VSFX\n",
+ name);
+ ctrl |= CX88X_EN_VSFX;
+ }
+#ifdef PCIPCI_ALIMAGIK
+ if (pci_pci_problems & PCIPCI_ALIMAGIK) {
+ printk(KERN_INFO "%s: quirk: PCIPCI_ALIMAGIK -- latency fixup\n",
+ name);
+ lat = 0x0A;
+ }
+#endif
+
+ /* check insmod options */
+ if (UNSET != latency)
+ lat = latency;
+
+ /* apply stuff */
+ if (ctrl) {
+ pci_read_config_byte(pci, CX88X_DEVCTRL, &value);
+ value |= ctrl;
+ pci_write_config_byte(pci, CX88X_DEVCTRL, value);
+ }
+ if (UNSET != lat) {
+ printk(KERN_INFO "%s: setting pci latency timer to %d\n",
+ name, latency);
+ pci_write_config_byte(pci, PCI_LATENCY_TIMER, latency);
+ }
+ return 0;
+}
+
+int cx88_get_resources(const struct cx88_core *core, struct pci_dev *pci)
+{
+ if (request_mem_region(pci_resource_start(pci,0),
+ pci_resource_len(pci,0),
+ core->name))
+ return 0;
+ printk(KERN_ERR
+ "%s/%d: Can't get MMIO memory @ 0x%llx, subsystem: %04x:%04x\n",
+ core->name, PCI_FUNC(pci->devfn),
+ (unsigned long long)pci_resource_start(pci, 0),
+ pci->subsystem_vendor, pci->subsystem_device);
+ return -EBUSY;
+}
+
+/* Allocate and initialize the cx88 core struct. One should hold the
+ * devlist mutex before calling this. */
+struct cx88_core *cx88_core_create(struct pci_dev *pci, int nr)
+{
+ struct cx88_core *core;
+ int i;
+
+ core = kzalloc(sizeof(*core), GFP_KERNEL);
+
+ atomic_inc(&core->refcount);
+ core->pci_bus = pci->bus->number;
+ core->pci_slot = PCI_SLOT(pci->devfn);
+ core->pci_irqmask = PCI_INT_RISC_RD_BERRINT | PCI_INT_RISC_WR_BERRINT |
+ PCI_INT_BRDG_BERRINT | PCI_INT_SRC_DMA_BERRINT |
+ PCI_INT_DST_DMA_BERRINT | PCI_INT_IPB_DMA_BERRINT;
+ mutex_init(&core->lock);
+
+ core->nr = nr;
+ sprintf(core->name, "cx88[%d]", core->nr);
+ if (0 != cx88_get_resources(core, pci)) {
+ kfree(core);
+ return NULL;
+ }
+
+ /* PCI stuff */
+ cx88_pci_quirks(core->name, pci);
+ core->lmmio = ioremap(pci_resource_start(pci, 0),
+ pci_resource_len(pci, 0));
+ core->bmmio = (u8 __iomem *)core->lmmio;
+
+ /* board config */
+ core->boardnr = UNSET;
+ if (card[core->nr] < ARRAY_SIZE(cx88_boards))
+ core->boardnr = card[core->nr];
+ for (i = 0; UNSET == core->boardnr && i < ARRAY_SIZE(cx88_subids); i++)
+ if (pci->subsystem_vendor == cx88_subids[i].subvendor &&
+ pci->subsystem_device == cx88_subids[i].subdevice)
+ core->boardnr = cx88_subids[i].card;
+ if (UNSET == core->boardnr) {
+ core->boardnr = CX88_BOARD_UNKNOWN;
+ cx88_card_list(core, pci);
+ }
+
+ memcpy(&core->board, &cx88_boards[core->boardnr], sizeof(core->board));
+
+ if (!core->board.num_frontends && (core->board.mpeg & CX88_MPEG_DVB))
+ core->board.num_frontends = 1;
+
+ info_printk(core, "subsystem: %04x:%04x, board: %s [card=%d,%s], frontend(s): %d\n",
+ pci->subsystem_vendor, pci->subsystem_device, core->board.name,
+ core->boardnr, card[core->nr] == core->boardnr ?
+ "insmod option" : "autodetected",
+ core->board.num_frontends);
+
+ if (tuner[core->nr] != UNSET)
+ core->board.tuner_type = tuner[core->nr];
+ if (radio[core->nr] != UNSET)
+ core->board.radio_type = radio[core->nr];
+
+ info_printk(core, "TV tuner type %d, Radio tuner type %d\n",
+ core->board.tuner_type, core->board.radio_type);
+
+ /* init hardware */
+ cx88_reset(core);
+ cx88_card_setup_pre_i2c(core);
+ cx88_i2c_init(core, pci);
+
+ /* load tuner module, if needed */
+ if (TUNER_ABSENT != core->board.tuner_type)
+ request_module("tuner");
+
+ cx88_card_setup(core);
+ cx88_ir_init(core, pci);
+
+ return core;
+}