#include "s5h1409.h"
#include "mt2131.h"
+#include "tda8290.h"
+#include "tda18271.h"
#include "lgdt330x.h"
+#include "xc5000.h"
#include "dvb-pll.h"
+#include "tuner-xc2028.h"
+#include "tuner-xc2028-types.h"
-static unsigned int debug = 0;
+static unsigned int debug;
-#define dprintk(level,fmt, arg...) if (debug >= level) \
- printk(KERN_DEBUG "%s: " fmt, dev->name, ## arg)
+#define dprintk(level, fmt, arg...)\
+ do { if (debug >= level)\
+ printk(KERN_DEBUG "%s/0: " fmt, dev->name, ## arg);\
+ } while (0)
+
+/* ------------------------------------------------------------------ */
+
+static unsigned int alt_tuner;
+module_param(alt_tuner, int, 0644);
+MODULE_PARM_DESC(alt_tuner, "Enable alternate tuner configuration");
/* ------------------------------------------------------------------ */
cx23885_free_buffer(q, (struct cx23885_buffer*)vb);
}
+static int cx23885_request_firmware(struct dvb_frontend *fe,
+ const struct firmware **fw, char *name)
+{
+ struct cx23885_tsport *port = fe->dvb->priv;
+ struct cx23885_dev *dev = port->dev;
+
+ dprintk(1, "%s(?,?,%s)\n", __FUNCTION__, name);
+
+ return request_firmware(fw, name, &dev->pci->dev);
+}
+
+static int hauppauge_hvr1500q_tuner_reset(struct dvb_frontend *fe)
+{
+ struct cx23885_tsport *port = fe->dvb->priv;
+ struct cx23885_dev *dev = port->dev;
+
+ dprintk(1, "%s()\n", __FUNCTION__);
+
+ /* Drive the tuner into reset back back */
+ cx_clear(GP0_IO, 0x00000004);
+ mdelay(200);
+ cx_set(GP0_IO, 0x00000004);
+
+ return 0;
+}
+
static struct videobuf_queue_ops dvb_qops = {
.buf_setup = dvb_buf_setup,
.buf_prepare = dvb_buf_prepare,
.demod_address = 0x32 >> 1,
.output_mode = S5H1409_SERIAL_OUTPUT,
.gpio = S5H1409_GPIO_ON,
- .if_freq = 44000,
+ .qam_if = 44000,
.inversion = S5H1409_INVERSION_OFF,
.status_mode = S5H1409_DEMODLOCKING
};
+static struct s5h1409_config hauppauge_ezqam_config = {
+ .demod_address = 0x32 >> 1,
+ .output_mode = S5H1409_SERIAL_OUTPUT,
+ .gpio = S5H1409_GPIO_OFF,
+ .qam_if = 4000,
+ .inversion = S5H1409_INVERSION_ON,
+ .status_mode = S5H1409_DEMODLOCKING
+};
+
static struct s5h1409_config hauppauge_hvr1800lp_config = {
.demod_address = 0x32 >> 1,
.output_mode = S5H1409_SERIAL_OUTPUT,
.gpio = S5H1409_GPIO_OFF,
- .if_freq = 44000,
+ .qam_if = 44000,
+ .inversion = S5H1409_INVERSION_OFF,
+ .status_mode = S5H1409_DEMODLOCKING
+};
+
+static struct s5h1409_config hauppauge_hvr1500_config = {
+ .demod_address = 0x32 >> 1,
+ .output_mode = S5H1409_SERIAL_OUTPUT,
+ .gpio = S5H1409_GPIO_OFF,
.inversion = S5H1409_INVERSION_OFF,
.status_mode = S5H1409_DEMODLOCKING
};
.serial_mpeg = 0x40,
};
+static struct s5h1409_config hauppauge_hvr1500q_config = {
+ .demod_address = 0x32 >> 1,
+ .output_mode = S5H1409_SERIAL_OUTPUT,
+ .gpio = S5H1409_GPIO_ON,
+ .qam_if = 44000,
+ .inversion = S5H1409_INVERSION_OFF,
+ .status_mode = S5H1409_DEMODLOCKING
+};
+
+static struct xc5000_config hauppauge_hvr1500q_tunerconfig = {
+ .i2c_address = 0x61,
+ .if_khz = 5380,
+ .request_firmware = cx23885_request_firmware,
+ .tuner_reset = hauppauge_hvr1500q_tuner_reset
+};
+
+static struct tda829x_config tda829x_no_probe = {
+ .probe_tuner = TDA829X_DONT_PROBE,
+};
+
+static struct tda18271_std_map hauppauge_tda18271_std_map = {
+ .atsc_6 = { .if_freq = 5380, .std_bits = 0x1b },
+ .qam_6 = { .if_freq = 4000, .std_bits = 0x18 },
+};
+
+static struct tda18271_config hauppauge_tda18271_config = {
+ .std_map = &hauppauge_tda18271_std_map,
+ .gate = TDA18271_GATE_ANALOG,
+};
+
+static int cx23885_hvr1500_xc3028_callback(void *ptr, int command, int arg)
+{
+ struct cx23885_tsport *port = ptr;
+ struct cx23885_dev *dev = port->dev;
+
+ switch (command) {
+ case XC2028_TUNER_RESET:
+ /* Send the tuner in then out of reset */
+ /* GPIO-2 xc3028 tuner */
+ dprintk(1, "%s: XC2028_TUNER_RESET %d\n", __FUNCTION__, arg);
+
+ cx_set(GP0_IO, 0x00040000);
+ cx_clear(GP0_IO, 0x00000004);
+ msleep(5);
+
+ cx_set(GP0_IO, 0x00040004);
+ msleep(5);
+ break;
+ case XC2028_RESET_CLK:
+ dprintk(1, "%s: XC2028_RESET_CLK %d\n", __FUNCTION__, arg);
+ break;
+ default:
+ dprintk(1, "%s: unknown command %d, arg %d\n", __FUNCTION__,
+ command, arg);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static int dvb_register(struct cx23885_tsport *port)
{
struct cx23885_dev *dev = port->dev;
+ struct cx23885_i2c *i2c_bus = NULL;
/* init struct videobuf_dvb */
port->dvb.name = dev->name;
/* init frontend */
switch (dev->board) {
case CX23885_BOARD_HAUPPAUGE_HVR1250:
- case CX23885_BOARD_HAUPPAUGE_HVR1800:
+ i2c_bus = &dev->i2c_bus[0];
port->dvb.frontend = dvb_attach(s5h1409_attach,
&hauppauge_generic_config,
- &dev->i2c_bus[0].i2c_adap);
+ &i2c_bus->i2c_adap);
if (port->dvb.frontend != NULL) {
dvb_attach(mt2131_attach, port->dvb.frontend,
- &dev->i2c_bus[0].i2c_adap,
+ &i2c_bus->i2c_adap,
&hauppauge_generic_tunerconfig, 0);
}
break;
+ case CX23885_BOARD_HAUPPAUGE_HVR1800:
+ i2c_bus = &dev->i2c_bus[0];
+ switch (alt_tuner) {
+ case 1:
+ port->dvb.frontend =
+ dvb_attach(s5h1409_attach,
+ &hauppauge_ezqam_config,
+ &i2c_bus->i2c_adap);
+ if (port->dvb.frontend != NULL) {
+ dvb_attach(tda829x_attach, port->dvb.frontend,
+ &dev->i2c_bus[1].i2c_adap, 0x42,
+ &tda829x_no_probe);
+ dvb_attach(tda18271_attach, port->dvb.frontend,
+ 0x60, &dev->i2c_bus[1].i2c_adap,
+ &hauppauge_tda18271_config);
+ }
+ break;
+ case 0:
+ default:
+ port->dvb.frontend =
+ dvb_attach(s5h1409_attach,
+ &hauppauge_generic_config,
+ &i2c_bus->i2c_adap);
+ if (port->dvb.frontend != NULL)
+ dvb_attach(mt2131_attach, port->dvb.frontend,
+ &i2c_bus->i2c_adap,
+ &hauppauge_generic_tunerconfig, 0);
+ break;
+ }
+ break;
case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
+ i2c_bus = &dev->i2c_bus[0];
port->dvb.frontend = dvb_attach(s5h1409_attach,
&hauppauge_hvr1800lp_config,
- &dev->i2c_bus[0].i2c_adap);
+ &i2c_bus->i2c_adap);
if (port->dvb.frontend != NULL) {
dvb_attach(mt2131_attach, port->dvb.frontend,
- &dev->i2c_bus[0].i2c_adap,
+ &i2c_bus->i2c_adap,
&hauppauge_generic_tunerconfig, 0);
}
break;
case CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP:
+ i2c_bus = &dev->i2c_bus[0];
port->dvb.frontend = dvb_attach(lgdt330x_attach,
&fusionhdtv_5_express,
+ &i2c_bus->i2c_adap);
+ if (port->dvb.frontend != NULL) {
+ dvb_attach(dvb_pll_attach, port->dvb.frontend, 0x61,
+ &i2c_bus->i2c_adap, DVB_PLL_LG_TDVS_H06XF);
+ }
+ break;
+ case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
+ i2c_bus = &dev->i2c_bus[1];
+ port->dvb.frontend = dvb_attach(s5h1409_attach,
+ &hauppauge_hvr1500q_config,
&dev->i2c_bus[0].i2c_adap);
if (port->dvb.frontend != NULL) {
- dvb_attach(dvb_pll_attach, port->dvb.frontend,
- 0x61, &dev->i2c_bus[0].i2c_adap,
- DVB_PLL_LG_TDVS_H06XF);
+ dvb_attach(xc5000_attach, port->dvb.frontend,
+ &i2c_bus->i2c_adap,
+ &hauppauge_hvr1500q_tunerconfig);
+ }
+ break;
+ case CX23885_BOARD_HAUPPAUGE_HVR1500:
+ i2c_bus = &dev->i2c_bus[1];
+ port->dvb.frontend = dvb_attach(s5h1409_attach,
+ &hauppauge_hvr1500_config,
+ &dev->i2c_bus[0].i2c_adap);
+ if (port->dvb.frontend != NULL) {
+ struct dvb_frontend *fe;
+ struct xc2028_config cfg = {
+ .i2c_adap = &i2c_bus->i2c_adap,
+ .i2c_addr = 0x61,
+ .video_dev = port,
+ .callback = cx23885_hvr1500_xc3028_callback,
+ };
+ static struct xc2028_ctrl ctl = {
+ .fname = "xc3028-v27.fw",
+ .max_len = 64,
+ .scode_table = OREN538,
+ };
+
+ fe = dvb_attach(xc2028_attach,
+ port->dvb.frontend, &cfg);
+ if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
+ fe->ops.tuner_ops.set_config(fe, &ctl);
}
break;
default:
}
/* Put the analog decoder in standby to keep it quiet */
- /* Assumption here: analog decoder is only on i2c bus 0 */
- cx23885_call_i2c_clients (&dev->i2c_bus[0], TUNER_SET_STANDBY, NULL);
+ cx23885_call_i2c_clients(i2c_bus, TUNER_SET_STANDBY, NULL);
+
+ if (port->dvb.frontend->ops.analog_ops.standby)
+ port->dvb.frontend->ops.analog_ops.standby(port->dvb.frontend);
/* register everything */
return videobuf_dvb_register(&port->dvb, THIS_MODULE, port,
/* dvb stuff */
printk("%s: cx23885 based dvb card\n", dev->name);
- videobuf_queue_init(&port->dvb.dvbq, &dvb_qops, dev->pci, &port->slock,
+ videobuf_queue_pci_init(&port->dvb.dvbq, &dvb_qops, dev->pci, &port->slock,
V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_TOP,
sizeof(struct cx23885_buffer), port);
err = dvb_register(port);