V4L/DVB (8068): cx18: Add I2C slave reset via GPIO upon initialization

[safe/jmp/linux-2.6] / drivers / media / video / cx18 / cx18-cards.h

diff --git a/drivers/media/video/cx18/cx18-cards.h b/drivers/media/video/cx18/cx18-cards.h
index bca249b..dc2dd94 100644 (file)
--- a/drivers/media/video/cx18/cx18-cards.h
+++ b/drivers/media/video/cx18/cx18-cards.h
@@ -36,36 +36,6 @@
 #define        CX18_CARD_INPUT_COMPOSITE2      5
 #define        CX18_CARD_INPUT_COMPOSITE3      6
 
-enum cx34180_video_input {
-       /* Composite video inputs In1-In8 */
-       CX23418_COMPOSITE1 = 1,
-       CX23418_COMPOSITE2,
-       CX23418_COMPOSITE3,
-       CX23418_COMPOSITE4,
-       CX23418_COMPOSITE5,
-       CX23418_COMPOSITE6,
-       CX23418_COMPOSITE7,
-       CX23418_COMPOSITE8,
-
-       /* S-Video inputs consist of one luma input (In1-In4) ORed with one
-          chroma input (In5-In8) */
-       CX23418_SVIDEO_LUMA1 = 0x10,
-       CX23418_SVIDEO_LUMA2 = 0x20,
-       CX23418_SVIDEO_LUMA3 = 0x30,
-       CX23418_SVIDEO_LUMA4 = 0x40,
-       CX23418_SVIDEO_CHROMA4 = 0x400,
-       CX23418_SVIDEO_CHROMA5 = 0x500,
-       CX23418_SVIDEO_CHROMA6 = 0x600,
-       CX23418_SVIDEO_CHROMA7 = 0x700,
-       CX23418_SVIDEO_CHROMA8 = 0x800,
-
-       /* S-Video aliases for common luma/chroma combinations */
-       CX23418_SVIDEO1 = 0x510,
-       CX23418_SVIDEO2 = 0x620,
-       CX23418_SVIDEO3 = 0x730,
-       CX23418_SVIDEO4 = 0x840,
-};
-
 /* audio inputs */
 #define        CX18_CARD_INPUT_AUD_TUNER       1
 #define        CX18_CARD_INPUT_LINE_IN1        2
@@ -75,16 +45,6 @@ enum cx34180_video_input {
 #define CX18_CARD_MAX_AUDIO_INPUTS 3
 #define CX18_CARD_MAX_TUNERS      2
 
-enum cx23418_audio_input {
-       /* Audio inputs: serial or In4-In8 */
-       CX23418_AUDIO_SERIAL,
-       CX23418_AUDIO4 = 4,
-       CX23418_AUDIO5,
-       CX23418_AUDIO6,
-       CX23418_AUDIO7,
-       CX23418_AUDIO8,
-};
-
 /* V4L2 capability aliases */
 #define CX18_CAP_ENCODER (V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_TUNER | \
                          V4L2_CAP_AUDIO | V4L2_CAP_READWRITE)
@@ -114,8 +74,15 @@ struct cx18_card_pci_info {
 /* The mask is the set of bits used by the operation */
 
 struct cx18_gpio_init { /* set initial GPIO DIR and OUT values */
-       u16 direction;  /* DIR setting. Leave to 0 if no init is needed */
-       u16 initial_value;
+       u32 direction;  /* DIR setting. Leave to 0 if no init is needed */
+       u32 initial_value;
+};
+
+struct cx18_gpio_i2c_slave_reset {
+       u32 active_lo_mask; /* GPIO outputs that reset i2c chips when low */
+       u32 active_hi_mask; /* GPIO outputs that reset i2c chips when high */
+       int msecs_asserted; /* time period reset must remain asserted */
+       int msecs_recovery; /* time after deassert for chips to be ready */
 };
 
 struct cx18_card_tuner {
@@ -153,7 +120,9 @@ struct cx18_card {
        struct cx18_card_audio_input radio_input;
 
        /* GPIO card-specific settings */
-       struct cx18_gpio_init           gpio_init;
+       u8 xceive_pin;          /* XCeive tuner GPIO reset pin */
+       struct cx18_gpio_init            gpio_init;
+       struct cx18_gpio_i2c_slave_reset gpio_i2c_slave_reset;
 
        struct cx18_card_tuner tuners[CX18_CARD_MAX_TUNERS];
        struct cx18_card_tuner_i2c *i2c;