depends on PCI
tristate
-config VIDEO_IR
- tristate
- depends on INPUT
-
config VIDEO_TVEEPROM
tristate
depends on I2C
comment "Video decoders"
+config VIDEO_ADV7180
+ tristate "Analog Devices ADV7180 decoder"
+ depends on VIDEO_V4L2 && I2C
+ ---help---
+ Support for the Analog Devices ADV7180 video decoder.
+
+ To compile this driver as a module, choose M here: the
+ module will be called adv7180.
+
config VIDEO_BT819
tristate "BT819A VideoStream decoder"
depends on VIDEO_V4L2 && I2C
To compile this driver as a module, choose M here: the
module will be called tvp5150.
+config VIDEO_TVP7002
+ tristate "Texas Instruments TVP7002 video decoder"
+ depends on VIDEO_V4L2 && I2C
+ ---help---
+ Support for the Texas Instruments TVP7002 video decoder.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tvp7002.
+
config VIDEO_VPX3220
tristate "vpx3220a, vpx3216b & vpx3214c video decoders"
depends on VIDEO_V4L2 && I2C
select VIDEO_ADV7343
select VIDEO_THS7303
help
- Support for DaVinci based display device.
+ Support for DM6467 based display device.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vpif_display.
+
+config CAPTURE_DAVINCI_DM646X_EVM
+ tristate "DM646x EVM Video Capture"
+ depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM
+ select VIDEOBUF_DMA_CONTIG
+ select VIDEO_DAVINCI_VPIF
+ help
+ Support for DM6467 based capture device.
To compile this driver as a module, choose M here: the
- module will be called davincihd_display.
+ module will be called vpif_capture.
config VIDEO_DAVINCI_VPIF
tristate "DaVinci VPIF Driver"
Say Y here if you want to test video apps or debug V4L devices.
In doubt, say N.
+config VIDEO_VPSS_SYSTEM
+ tristate "VPSS System module driver"
+ depends on ARCH_DAVINCI
+ help
+ Support for vpss system module for video driver
+
+config VIDEO_VPFE_CAPTURE
+ tristate "VPFE Video Capture Driver"
+ depends on VIDEO_V4L2 && ARCH_DAVINCI
+ select VIDEOBUF_DMA_CONTIG
+ help
+ Support for DMXXXX VPFE based frame grabber. This is the
+ common V4L2 module for following DMXXX SoCs from Texas
+ Instruments:- DM6446 & DM355.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vpfe-capture.
+
+config VIDEO_DM6446_CCDC
+ tristate "DM6446 CCDC HW module"
+ depends on ARCH_DAVINCI_DM644x && VIDEO_VPFE_CAPTURE
+ select VIDEO_VPSS_SYSTEM
+ default y
+ help
+ Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces
+ with decoder modules such as TVP5146 over BT656 or
+ sensor module such as MT9T001 over a raw interface. This
+ module configures the interface and CCDC/ISIF to do
+ video frame capture from slave decoders.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vpfe.
+
+config VIDEO_DM355_CCDC
+ tristate "DM355 CCDC HW module"
+ depends on ARCH_DAVINCI_DM355 && VIDEO_VPFE_CAPTURE
+ select VIDEO_VPSS_SYSTEM
+ default y
+ help
+ Enables DM355 CCD hw module. DM355 CCDC hw interfaces
+ with decoder modules such as TVP5146 over BT656 or
+ sensor module such as MT9T001 over a raw interface. This
+ module configures the interface and CCDC/ISIF to do
+ video frame capture from a slave decoders
+
+ To compile this driver as a module, choose M here: the
+ module will be called vpfe.
+
+config VIDEO_ISIF
+ tristate "ISIF HW module"
+ depends on ARCH_DAVINCI_DM365 && VIDEO_VPFE_CAPTURE
+ select VIDEO_VPSS_SYSTEM
+ default y
+ help
+ Enables ISIF hw module. This is the hardware module for
+ configuring ISIF in VPFE to capture Raw Bayer RGB data from
+ a image sensor or YUV data from a YUV source.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vpfe.
+
source "drivers/media/video/bt8xx/Kconfig"
config VIDEO_PMS
tristate "Mediavision Pro Movie Studio Video For Linux"
- depends on ISA && VIDEO_V4L1
+ depends on ISA && VIDEO_V4L2
help
Say Y if you have such a thing.
information.
config VIDEO_CPIA
- tristate "CPiA Video For Linux"
+ tristate "CPiA Video For Linux (DEPRECATED)"
depends on VIDEO_V4L1
+ default n
---help---
+ This driver is DEPRECATED please use the gspca cpia1 module
+ instead. Note that you need atleast version 0.6.4 of libv4l for
+ the cpia1 gspca module.
+
This is the video4linux driver for cameras based on Vision's CPiA
(Colour Processor Interface ASIC), such as the Creative Labs Video
Blaster Webcam II. If you have one of these cameras, say Y here
help
This driver supports MT9T031 cameras from Micron.
+config SOC_CAMERA_MT9T112
+ tristate "mt9t112 support"
+ depends on SOC_CAMERA && I2C
+ help
+ This driver supports MT9T112 cameras from Aptina.
+
config SOC_CAMERA_MT9V022
tristate "mt9v022 support"
depends on SOC_CAMERA && I2C
help
This driver supports MT9V022 cameras from Micron
+config SOC_CAMERA_RJ54N1
+ tristate "rj54n1cb0c support"
+ depends on SOC_CAMERA && I2C
+ help
+ This is a rj54n1cb0c video driver
+
config SOC_CAMERA_TW9910
tristate "tw9910 support"
depends on SOC_CAMERA && I2C
help
This is a ov772x camera driver
+config SOC_CAMERA_OV9640
+ tristate "ov9640 camera support"
+ depends on SOC_CAMERA && I2C
+ help
+ This is a ov9640 camera driver
+
config MX1_VIDEO
bool
source "drivers/media/video/em28xx/Kconfig"
+source "drivers/media/video/tlg2300/Kconfig"
+
source "drivers/media/video/cx231xx/Kconfig"
source "drivers/media/video/usbvision/Kconfig"
source "drivers/media/video/et61x251/Kconfig"
config VIDEO_OVCAMCHIP
- tristate "OmniVision Camera Chip support"
+ tristate "OmniVision Camera Chip support (DEPRECATED)"
depends on I2C && VIDEO_V4L1
+ default n
---help---
+ This driver is DEPRECATED please use the gspca ov519 module
+ instead. Note that for the ov511 / ov518 support of the gspca module
+ you need atleast version 0.6.0 of libv4l and for the w9968cf
+ atleast version 0.6.3 of libv4l.
+
Support for the OmniVision OV6xxx and OV7xxx series of camera chips.
This driver is intended to be used with the ov511 and w9968cf USB
camera drivers.
module will be called ovcamchip.
config USB_W9968CF
- tristate "USB W996[87]CF JPEG Dual Mode Camera support"
+ tristate "USB W996[87]CF JPEG Dual Mode Camera support (DEPRECATED)"
depends on VIDEO_V4L1 && I2C && VIDEO_OVCAMCHIP
+ default n
---help---
+ This driver is DEPRECATED please use the gspca ov519 module
+ instead. Note that for the w9968cf support of the gspca module
+ you need atleast version 0.6.3 of libv4l.
+
Say Y here if you want support for cameras based on OV681 or
Winbond W9967CF/W9968CF JPEG USB Dual Mode Camera Chips.
config USB_OV511
tristate "USB OV511 Camera support (DEPRECATED)"
depends on VIDEO_V4L1
+ default n
---help---
This driver is DEPRECATED please use the gspca ov519 module
instead. Note that for the ov511 / ov518 support of the gspca module
source "drivers/media/video/sn9c102/Kconfig"
config USB_STV680
- tristate "USB STV680 (Pencam) Camera support"
+ tristate "USB STV680 (Pencam) Camera support (DEPRECATED)"
depends on VIDEO_V4L1
+ default n
---help---
+ This driver is DEPRECATED please use the gspca stv0680 module
+ instead. Note that for the gspca stv0680 module you need
+ atleast version 0.6.3 of libv4l.
+
Say Y here if you want to connect this type of camera to your
computer's USB port. This includes the Pencam line of cameras.
See <file:Documentation/video4linux/stv680.txt> for more information