#
+# Generic video config states
+#
+
+config VIDEO_V4L2
+ tristate
+ depends on VIDEO_DEV && VIDEO_V4L2_COMMON
+ default VIDEO_DEV && VIDEO_V4L2_COMMON
+
+config VIDEO_V4L1
+ tristate
+ depends on VIDEO_DEV && VIDEO_V4L2_COMMON && VIDEO_ALLOW_V4L1
+ default VIDEO_DEV && VIDEO_V4L2_COMMON && VIDEO_ALLOW_V4L1
+
+config VIDEOBUF_GEN
+ tristate
+
+config VIDEOBUF_DMA_SG
+ depends on HAS_DMA
+ select VIDEOBUF_GEN
+ tristate
+
+config VIDEOBUF_VMALLOC
+ select VIDEOBUF_GEN
+ tristate
+
+config VIDEOBUF_DMA_CONTIG
+ depends on HAS_DMA
+ select VIDEOBUF_GEN
+ tristate
+
+config VIDEOBUF_DVB
+ tristate
+ select VIDEOBUF_GEN
+
+config VIDEO_BTCX
+ tristate
+
+config VIDEO_IR
+ tristate
+ depends on INPUT
+
+config VIDEO_TVEEPROM
+ tristate
+ depends on I2C
+
+config VIDEO_TUNER
+ tristate
+ depends on MEDIA_TUNER
+
+#
# Multimedia Video device configuration
#
menuconfig VIDEO_CAPTURE_DRIVERS
bool "Video capture adapters"
- depends on VIDEO_DEV
+ depends on VIDEO_V4L2
default y
---help---
Say Y here to enable selecting the video adapters for
webcams, analog TV, and hybrid analog/digital TV.
Some of those devices also supports FM radio.
-if VIDEO_CAPTURE_DRIVERS && VIDEO_DEV
+if VIDEO_CAPTURE_DRIVERS && VIDEO_V4L2
config VIDEO_ADV_DEBUG
bool "Enable advanced debug functionality"
In doubt, say Y.
+config VIDEO_IR_I2C
+ tristate "I2C module for IR" if !VIDEO_HELPER_CHIPS_AUTO
+ depends on I2C && VIDEO_IR
+ default y
+ ---help---
+ Most boards have an IR chip directly connected via GPIO. However,
+ some video boards have the IR connected via I2C bus.
+
+ If your board doesn't have an I2C IR chip, you may disable this
+ option.
+
+ In doubt, say Y.
+
#
# Encoder / Decoder module configuration
#
config VIDEO_TVAUDIO
tristate "Simple audio decoder chips"
- depends on VIDEO_V4L1 && I2C
+ depends on VIDEO_V4L2 && I2C
---help---
Support for several audio decoder chips found on some bt8xx boards:
Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300,
config VIDEO_TDA7432
tristate "Philips TDA7432 audio processor"
- depends on VIDEO_V4L1 && I2C
+ depends on VIDEO_V4L2 && I2C
---help---
Support for tda7432 audio decoder chip found on some bt8xx boards.
config VIDEO_TDA9875
tristate "Philips TDA9875 audio processor"
- depends on VIDEO_V4L1 && I2C
+ depends on VIDEO_V4L2 && I2C
---help---
Support for tda9875 audio decoder chip found on some bt8xx boards.
To compile this driver as a module, choose M here: the
module will be called msp3400.
+config VIDEO_CS5345
+ tristate "Cirrus Logic CS5345 audio ADC"
+ depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
+ ---help---
+ Support for the Cirrus Logic CS5345 24-bit, 192 kHz
+ stereo A/D converter.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cs5345.
+
config VIDEO_CS53L32A
tristate "Cirrus Logic CS53L32A audio ADC"
- depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
+ depends on VIDEO_V4L2 && I2C
---help---
Support for the Cirrus Logic CS53L32A low voltage
stereo A/D converter.
To compile this driver as a module, choose M here: the
module will be called cs53l32a.
+config VIDEO_M52790
+ tristate "Mitsubishi M52790 A/V switch"
+ depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
+ ---help---
+ Support for the Mitsubishi M52790 A/V switch.
+
+ To compile this driver as a module, choose M here: the
+ module will be called m52790.
+
config VIDEO_TLV320AIC23B
tristate "Texas Instruments TLV320AIC23B audio codec"
depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
config VIDEO_WM8775
tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer"
- depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
+ depends on VIDEO_V4L2 && I2C
---help---
Support for the Wolfson Microelectronics WM8775 high
performance stereo A/D Converter with a 4 channel input mixer.
config VIDEO_WM8739
tristate "Wolfson Microelectronics WM8739 stereo audio ADC"
- depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
+ depends on VIDEO_V4L2 && I2C
---help---
Support for the Wolfson Microelectronics WM8739
stereo A/D Converter.
config VIDEO_SAA711X
tristate "Philips SAA7113/4/5 video decoders"
- depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
+ depends on VIDEO_V4L2 && I2C
---help---
Support for the Philips SAA7113/4/5 video decoders.
To compile this driver as a module, choose M here: the
module will be called saa7115.
+config VIDEO_SAA717X
+ tristate "Philips SAA7171/3/4 audio/video decoders"
+ depends on VIDEO_V4L2 && I2C
+ ---help---
+ Support for the Philips SAA7171/3/4 audio/video decoders.
+
+ To compile this driver as a module, choose M here: the
+ module will be called saa717x.
+
config VIDEO_SAA7191
tristate "Philips SAA7191 video decoder"
depends on VIDEO_V4L1 && I2C
config VIDEO_CX2341X
tristate "Conexant CX2341x MPEG encoders"
- depends on VIDEO_V4L2 && EXPERIMENTAL
+ depends on VIDEO_V4L2 && EXPERIMENTAL && VIDEO_V4L2_COMMON
---help---
Support for the Conexant CX23416 MPEG encoders
and CX23415 MPEG encoder/decoders.
config VIDEO_SAA7127
tristate "Philips SAA7127/9 digital video encoders"
- depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
+ depends on VIDEO_V4L2 && I2C
---help---
Support for the Philips SAA7127/9 digital video encoders.
config VIDEO_UPD64031A
tristate "NEC Electronics uPD64031A Ghost Reduction"
- depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
+ depends on VIDEO_V4L2 && I2C
---help---
Support for the NEC Electronics uPD64031A Ghost Reduction
video chip. It is most often found in NTSC TV cards made for
config VIDEO_UPD64083
tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation"
- depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
+ depends on VIDEO_V4L2 && I2C
---help---
Support for the NEC Electronics uPD64083 3-Dimensional Y/C
separation video chip. It is used to improve the quality of
config VIDEO_VIVI
tristate "Virtual Video Driver"
- depends on VIDEO_V4L2 && !SPARC32 && !SPARC64 && PCI
- select VIDEO_BUF
+ depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64
+ select VIDEOBUF_VMALLOC
default n
---help---
Enables a virtual video driver. This device shows a color bar
To compile this driver as a module, choose M here: the
module will be called pms.
-config VIDEO_PLANB
- tristate "PlanB Video-In on PowerMac"
- depends on PPC_PMAC && VIDEO_V4L1 && BROKEN
- help
- PlanB is the V4L driver for the PowerMac 7x00/8x00 series video
- input hardware. If you want to experiment with this, say Y.
- Otherwise, or if you don't understand a word, say N. See
- <http://www.cpu.lu/~mlan/linux/dev/planb.html> for more info.
-
- Saying M will compile this driver as a module (planb).
-
config VIDEO_BWQCAM
tristate "Quickcam BW Video For Linux"
depends on PARPORT && VIDEO_V4L1
driver for PCI. There is a product page at
<http://www.stradis.com/>.
-config VIDEO_ZORAN_ZR36060
- tristate
-
config VIDEO_ZORAN
tristate "Zoran ZR36057/36067 Video For Linux"
depends on PCI && I2C_ALGOBIT && VIDEO_V4L1 && VIRT_TO_BUS
To compile this driver as a module, choose M here: the
module will be called zr36067.
+config VIDEO_ZORAN_DC30
+ tristate "Pinnacle/Miro DC30(+) support"
+ depends on VIDEO_ZORAN
+ select VIDEO_ADV7175 if VIDEO_HELPER_CHIPS_AUTO
+ select VIDEO_VPX3220 if VIDEO_HELPER_CHIPS_AUTO
+ help
+ Support for the Pinnacle/Miro DC30(+) MJPEG capture/playback
+ card. This also supports really old DC10 cards based on the
+ zr36050 MJPEG codec and zr36016 VFE.
+
+config VIDEO_ZORAN_ZR36060
+ tristate "Zoran ZR36060"
+ depends on VIDEO_ZORAN
+ help
+ Say Y to support Zoran boards based on 36060 chips.
+ This includes Iomega Buz, Pinnacle DC10, Linux media Labs 33
+ and 33 R10 and AverMedia 6 boards.
+
config VIDEO_ZORAN_BUZ
tristate "Iomega Buz support"
- depends on VIDEO_ZORAN
+ depends on VIDEO_ZORAN_ZR36060
select VIDEO_SAA7111 if VIDEO_HELPER_CHIPS_AUTO
select VIDEO_SAA7185 if VIDEO_HELPER_CHIPS_AUTO
- select VIDEO_ZORAN_ZR36060
help
Support for the Iomega Buz MJPEG capture/playback card.
config VIDEO_ZORAN_DC10
tristate "Pinnacle/Miro DC10(+) support"
- depends on VIDEO_ZORAN
- select VIDEO_SAA7110
+ depends on VIDEO_ZORAN_ZR36060
+ select VIDEO_SAA7110 if VIDEO_HELPER_CHIPS_AUTO
select VIDEO_ADV7175 if VIDEO_HELPER_CHIPS_AUTO
- select VIDEO_ZORAN_ZR36060
help
Support for the Pinnacle/Miro DC10(+) MJPEG capture/playback
card.
-config VIDEO_ZORAN_DC30
- tristate "Pinnacle/Miro DC30(+) support"
- depends on VIDEO_ZORAN
- select VIDEO_ADV7175 if VIDEO_HELPER_CHIPS_AUTO
- select VIDEO_VPX3220 if VIDEO_HELPER_CHIPS_AUTO
- help
- Support for the Pinnacle/Miro DC30(+) MJPEG capture/playback
- card. This also supports really old DC10 cards based on the
- zr36050 MJPEG codec and zr36016 VFE.
-
config VIDEO_ZORAN_LML33
tristate "Linux Media Labs LML33 support"
- depends on VIDEO_ZORAN
+ depends on VIDEO_ZORAN_ZR36060
select VIDEO_BT819 if VIDEO_HELPER_CHIPS_AUTO
select VIDEO_BT856 if VIDEO_HELPER_CHIPS_AUTO
- select VIDEO_ZORAN_ZR36060
help
Support for the Linux Media Labs LML33 MJPEG capture/playback
card.
config VIDEO_ZORAN_LML33R10
tristate "Linux Media Labs LML33R10 support"
- depends on VIDEO_ZORAN
+ depends on VIDEO_ZORAN_ZR36060
select VIDEO_SAA7114 if VIDEO_HELPER_CHIPS_AUTO
select VIDEO_ADV7170 if VIDEO_HELPER_CHIPS_AUTO
- select VIDEO_ZORAN_ZR36060
help
support for the Linux Media Labs LML33R10 MJPEG capture/playback
card.
config VIDEO_ZORAN_AVS6EYES
tristate "AverMedia 6 Eyes support (EXPERIMENTAL)"
- depends on VIDEO_ZORAN && EXPERIMENTAL && VIDEO_V4L1
+ depends on VIDEO_ZORAN_ZR36060 && EXPERIMENTAL && VIDEO_V4L1
select VIDEO_BT856 if VIDEO_HELPER_CHIPS_AUTO
select VIDEO_KS0127 if VIDEO_HELPER_CHIPS_AUTO
- select VIDEO_ZORAN_ZR36060
help
Support for the AverMedia 6 Eyes video surveillance card.
source "drivers/media/video/cx23885/Kconfig"
+source "drivers/media/video/au0828/Kconfig"
+
source "drivers/media/video/ivtv/Kconfig"
+source "drivers/media/video/cx18/Kconfig"
+
config VIDEO_M32R_AR
tristate "AR devices"
depends on M32R && VIDEO_V4L1
if V4L_USB_DRIVERS && USB
+source "drivers/media/video/uvc/Kconfig"
+
+source "drivers/media/video/gspca/Kconfig"
+
source "drivers/media/video/pvrusb2/Kconfig"
source "drivers/media/video/em28xx/Kconfig"
To compile this driver as a module, choose M here: the
module will be called zr364xx.
+config USB_STKWEBCAM
+ tristate "USB Syntek DC1125 Camera support"
+ depends on VIDEO_V4L2 && EXPERIMENTAL
+ ---help---
+ Say Y here if you want to use this type of camera.
+ Supported devices are typically found in some Asus laptops,
+ with USB id 174f:a311 and 05e1:0501. Other Syntek cameras
+ may be supported by the stk11xx driver, from which this is
+ derived, see http://stk11xx.sourceforge.net
+
+ To compile this driver as a module, choose M here: the
+ module will be called stkwebcam.
+
+config USB_S2255
+ tristate "USB Sensoray 2255 video capture device"
+ depends on VIDEO_V4L2
+ select VIDEOBUF_VMALLOC
+ default n
+ help
+ Say Y here if you want support for the Sensoray 2255 USB device.
+ This driver can be compiled as a module, called s2255drv.
+
endif # V4L_USB_DRIVERS
+config SOC_CAMERA
+ tristate "SoC camera support"
+ depends on VIDEO_V4L2 && HAS_DMA
+ select VIDEOBUF_GEN
+ help
+ SoC Camera is a common API to several cameras, not connecting
+ over a bus like PCI or USB. For example some i2c camera connected
+ directly to the data bus of an SoC.
+
+config SOC_CAMERA_MT9M001
+ tristate "mt9m001 support"
+ depends on SOC_CAMERA && I2C
+ select GPIO_PCA953X if MT9M001_PCA9536_SWITCH
+ help
+ This driver supports MT9M001 cameras from Micron, monochrome
+ and colour models.
+
+config MT9M001_PCA9536_SWITCH
+ bool "pca9536 datawidth switch for mt9m001"
+ depends on SOC_CAMERA_MT9M001 && GENERIC_GPIO
+ help
+ Select this if your MT9M001 camera uses a PCA9536 I2C GPIO
+ extender to switch between 8 and 10 bit datawidth modes
+
+config SOC_CAMERA_MT9V022
+ tristate "mt9v022 support"
+ depends on SOC_CAMERA && I2C
+ select GPIO_PCA953X if MT9V022_PCA9536_SWITCH
+ help
+ This driver supports MT9V022 cameras from Micron
+
+config MT9V022_PCA9536_SWITCH
+ bool "pca9536 datawidth switch for mt9v022"
+ depends on SOC_CAMERA_MT9V022 && GENERIC_GPIO
+ help
+ Select this if your MT9V022 camera uses a PCA9536 I2C GPIO
+ extender to switch between 8 and 10 bit datawidth modes
+
+config SOC_CAMERA_PLATFORM
+ tristate "platform camera support"
+ depends on SOC_CAMERA
+ help
+ This is a generic SoC camera platform driver, useful for testing
+
+config VIDEO_PXA27x
+ tristate "PXA27x Quick Capture Interface driver"
+ depends on VIDEO_DEV && PXA27x
+ select SOC_CAMERA
+ select VIDEOBUF_DMA_SG
+ ---help---
+ This is a v4l2 driver for the PXA27x Quick Capture Interface
+
+config VIDEO_SH_MOBILE_CEU
+ tristate "SuperH Mobile CEU Interface driver"
+ depends on VIDEO_DEV
+ select SOC_CAMERA
+ select VIDEOBUF_DMA_CONTIG
+ ---help---
+ This is a v4l2 driver for the SuperH Mobile CEU Interface
+
endif # VIDEO_CAPTURE_DRIVERS
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff