module will be called cs53l32a.
config VIDEO_M52790
- tristate "Mitsubishi M52790 A/V switch"
- depends on VIDEO_V4L2 && I2C
- ---help---
+ tristate "Mitsubishi M52790 A/V switch"
+ depends on VIDEO_V4L2 && I2C
+ ---help---
Support for the Mitsubishi M52790 A/V switch.
To compile this driver as a module, choose M here: the
To compile this driver as a module, choose M here: the
module will be called vp27smpx.
+comment "RDS decoders"
+
+config VIDEO_SAA6588
+ tristate "SAA6588 Radio Chip RDS decoder support"
+ depends on VIDEO_V4L2 && I2C
+
+ help
+ Support for this Radio Data System (RDS) decoder. This allows
+ seeing radio station identification transmitted using this
+ standard.
+
+ To compile this driver as a module, choose M here: the
+ module will be called saa6588.
+
comment "Video decoders"
+config VIDEO_ADV7180
+ tristate "Analog Devices ADV7180 decoder"
+ depends on VIDEO_V4L2 && I2C
+ ---help---
+ Support for the Analog Devices ADV7180 video decoder.
+
+ To compile this driver as a module, choose M here: the
+ module will be called adv7180.
+
config VIDEO_BT819
tristate "BT819A VideoStream decoder"
- depends on VIDEO_V4L1 && I2C
+ depends on VIDEO_V4L2 && I2C
---help---
Support for BT819A video decoder.
config VIDEO_BT856
tristate "BT856 VideoStream decoder"
- depends on VIDEO_V4L1 && I2C
+ depends on VIDEO_V4L2 && I2C
---help---
Support for BT856 video decoder.
config VIDEO_BT866
tristate "BT866 VideoStream decoder"
- depends on VIDEO_V4L1 && I2C
+ depends on VIDEO_V4L2 && I2C
---help---
Support for BT866 video decoder.
config VIDEO_KS0127
tristate "KS0127 video decoder"
- depends on VIDEO_V4L1 && I2C
+ depends on VIDEO_V4L2 && I2C
---help---
Support for KS0127 video decoder.
OV7670 VGA camera. It currently only works with the M88ALP01
controller.
+config VIDEO_MT9V011
+ tristate "Micron mt9v011 sensor support"
+ depends on I2C && VIDEO_V4L2
+ ---help---
+ This is a Video4Linux2 sensor-level driver for the Micron
+ mt0v011 1.3 Mpixel camera. It currently only works with the
+ em28xx driver.
+
config VIDEO_TCM825X
tristate "TCM825x camera sensor support"
depends on I2C && VIDEO_V4L2
config VIDEO_SAA7110
tristate "Philips SAA7110 video decoder"
- depends on VIDEO_V4L1 && I2C
+ depends on VIDEO_V4L2 && I2C
---help---
Support for the Philips SAA7110 video decoders.
To compile this driver as a module, choose M here: the
module will be called saa7110.
-config VIDEO_SAA7111
- tristate "Philips SAA7111 video decoder"
- depends on VIDEO_V4L1 && I2C
- ---help---
- Support for the Philips SAA711 video decoder.
-
- To compile this driver as a module, choose M here: the
- module will be called saa7111.
-
-config VIDEO_SAA7114
- tristate "Philips SAA7114 video decoder"
- depends on VIDEO_V4L1 && I2C
- ---help---
- Support for the Philips SAA7114 video decoder. This driver
- is used only on Zoran driver and should be moved soon to
- SAA711x module.
-
- To compile this driver as a module, choose M here: the
- module will be called saa7114.
-
config VIDEO_SAA711X
- tristate "Philips SAA7113/4/5 video decoders"
+ tristate "Philips SAA7111/3/4/5 video decoders"
depends on VIDEO_V4L2 && I2C
---help---
- Support for the Philips SAA7113/4/5 video decoders.
+ Support for the Philips SAA7111/3/4/5 video decoders.
To compile this driver as a module, choose M here: the
module will be called saa7115.
To compile this driver as a module, choose M here: the
module will be called saa7191.
+config VIDEO_TVP514X
+ tristate "Texas Instruments TVP514x video decoder"
+ depends on VIDEO_V4L2 && I2C
+ ---help---
+ This is a Video4Linux2 sensor-level driver for the TI TVP5146/47
+ decoder. It is currently working with the TI OMAP3 camera
+ controller.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tvp514x.
+
config VIDEO_TVP5150
tristate "Texas Instruments TVP5150 video decoder"
depends on VIDEO_V4L2 && I2C
config VIDEO_VPX3220
tristate "vpx3220a, vpx3216b & vpx3214c video decoders"
- depends on VIDEO_V4L1 && I2C
+ depends on VIDEO_V4L2 && I2C
---help---
Support for VPX322x video decoders.
config VIDEO_SAA7185
tristate "Philips SAA7185 video encoder"
- depends on VIDEO_V4L1 && I2C
+ depends on VIDEO_V4L2 && I2C
---help---
Support for the Philips SAA7185 video encoder.
config VIDEO_ADV7170
tristate "Analog Devices ADV7170 video encoder"
- depends on VIDEO_V4L1 && I2C
+ depends on VIDEO_V4L2 && I2C
---help---
Support for the Analog Devices ADV7170 video encoder driver
config VIDEO_ADV7175
tristate "Analog Devices ADV7175 video encoder"
- depends on VIDEO_V4L1 && I2C
+ depends on VIDEO_V4L2 && I2C
---help---
Support for the Analog Devices ADV7175 video encoder driver
To compile this driver as a module, choose M here: the
module will be called adv7175.
+config VIDEO_THS7303
+ tristate "THS7303 Video Amplifier"
+ depends on I2C
+ help
+ Support for TI THS7303 video amplifier
+
+ To compile this driver as a module, choose M here: the
+ module will be called ths7303.
+
+config VIDEO_ADV7343
+ tristate "ADV7343 video encoder"
+ depends on I2C
+ help
+ Support for Analog Devices I2C bus based ADV7343 encoder.
+
+ To compile this driver as a module, choose M here: the
+ module will be called adv7343.
+
comment "Video improvement chips"
config VIDEO_UPD64031A
endmenu # encoder / decoder chips
+config DISPLAY_DAVINCI_DM646X_EVM
+ tristate "DM646x EVM Video Display"
+ depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM
+ select VIDEOBUF_DMA_CONTIG
+ select VIDEO_DAVINCI_VPIF
+ select VIDEO_ADV7343
+ select VIDEO_THS7303
+ help
+ Support for DM6467 based display device.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vpif_display.
+
+config CAPTURE_DAVINCI_DM646X_EVM
+ tristate "DM646x EVM Video Capture"
+ depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM
+ select VIDEOBUF_DMA_CONTIG
+ select VIDEO_DAVINCI_VPIF
+ help
+ Support for DM6467 based capture device.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vpif_capture.
+
+config VIDEO_DAVINCI_VPIF
+ tristate "DaVinci VPIF Driver"
+ depends on DISPLAY_DAVINCI_DM646X_EVM
+ help
+ Support for DaVinci VPIF Driver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vpif.
+
config VIDEO_VIVI
tristate "Virtual Video Driver"
depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64
Say Y here if you want to test video apps or debug V4L devices.
In doubt, say N.
-source "drivers/media/video/bt8xx/Kconfig"
-
-config VIDEO_SAA6588
- tristate "SAA6588 Radio Chip RDS decoder support on BT848 cards"
- depends on I2C && VIDEO_BT848
+config VIDEO_VPSS_SYSTEM
+ tristate "VPSS System module driver"
+ depends on ARCH_DAVINCI
+ help
+ Support for vpss system module for video driver
+ default y
+config VIDEO_VPFE_CAPTURE
+ tristate "VPFE Video Capture Driver"
+ depends on VIDEO_V4L2 && ARCH_DAVINCI
+ select VIDEOBUF_DMA_CONTIG
help
- Support for Radio Data System (RDS) decoder. This allows seeing
- radio station identification transmitted using this standard.
- Currently, it works only with bt8x8 chips.
+ Support for DMXXXX VPFE based frame grabber. This is the
+ common V4L2 module for following DMXXX SoCs from Texas
+ Instruments:- DM6446 & DM355.
To compile this driver as a module, choose M here: the
- module will be called saa6588.
+ module will be called vpfe-capture.
+
+config VIDEO_DM6446_CCDC
+ tristate "DM6446 CCDC HW module"
+ depends on ARCH_DAVINCI_DM644x && VIDEO_VPFE_CAPTURE
+ select VIDEO_VPSS_SYSTEM
+ default y
+ help
+ Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces
+ with decoder modules such as TVP5146 over BT656 or
+ sensor module such as MT9T001 over a raw interface. This
+ module configures the interface and CCDC/ISIF to do
+ video frame capture from slave decoders.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vpfe.
+
+config VIDEO_DM355_CCDC
+ tristate "DM355 CCDC HW module"
+ depends on ARCH_DAVINCI_DM355 && VIDEO_VPFE_CAPTURE
+ select VIDEO_VPSS_SYSTEM
+ default y
+ help
+ Enables DM355 CCD hw module. DM355 CCDC hw interfaces
+ with decoder modules such as TVP5146 over BT656 or
+ sensor module such as MT9T001 over a raw interface. This
+ module configures the interface and CCDC/ISIF to do
+ video frame capture from a slave decoders
+
+ To compile this driver as a module, choose M here: the
+ module will be called vpfe.
+
+source "drivers/media/video/bt8xx/Kconfig"
config VIDEO_PMS
tristate "Mediavision Pro Movie Studio Video For Linux"
config VIDEO_VINO
tristate "SGI Vino Video For Linux (EXPERIMENTAL)"
depends on I2C && SGI_IP22 && EXPERIMENTAL && VIDEO_V4L2
- select I2C_ALGO_SGI
select VIDEO_SAA7191 if VIDEO_HELPER_CHIPS_AUTO
help
Say Y here to build in support for the Vino video input system found
depends on PCI && VIDEO_V4L1 && I2C
select VIDEO_SAA7146_VV
select VIDEO_TUNER
- select VIDEO_SAA7115 if VIDEO_HELPER_CHIPS_AUTO
+ select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO
select VIDEO_TDA9840 if VIDEO_HELPER_CHIPS_AUTO
select VIDEO_TEA6415C if VIDEO_HELPER_CHIPS_AUTO
select VIDEO_TEA6420 if VIDEO_HELPER_CHIPS_AUTO
source "drivers/media/video/cx18/Kconfig"
+source "drivers/media/video/saa7164/Kconfig"
+
config VIDEO_M32R_AR
tristate "AR devices"
depends on M32R && VIDEO_V4L1
config SOC_CAMERA
tristate "SoC camera support"
- depends on VIDEO_V4L2 && HAS_DMA
+ depends on VIDEO_V4L2 && HAS_DMA && I2C
select VIDEOBUF_GEN
help
SoC Camera is a common API to several cameras, not connecting
This driver supports MT9M001 cameras from Micron, monochrome
and colour models.
-config MT9M001_PCA9536_SWITCH
- bool "pca9536 datawidth switch for mt9m001"
- depends on SOC_CAMERA_MT9M001 && GENERIC_GPIO
+config SOC_CAMERA_MT9M111
+ tristate "mt9m111 and mt9m112 support"
+ depends on SOC_CAMERA && I2C
help
- Select this if your MT9M001 camera uses a PCA9536 I2C GPIO
- extender to switch between 8 and 10 bit datawidth modes
+ This driver supports MT9M111 and MT9M112 cameras from Micron
-config SOC_CAMERA_MT9M111
- tristate "mt9m111 support"
+config SOC_CAMERA_MT9T031
+ tristate "mt9t031 support"
depends on SOC_CAMERA && I2C
help
- This driver supports MT9M111 cameras from Micron
+ This driver supports MT9T031 cameras from Micron.
config SOC_CAMERA_MT9V022
tristate "mt9v022 support"
help
This driver supports MT9V022 cameras from Micron
-config MT9V022_PCA9536_SWITCH
- bool "pca9536 datawidth switch for mt9v022"
- depends on SOC_CAMERA_MT9V022 && GENERIC_GPIO
+config SOC_CAMERA_TW9910
+ tristate "tw9910 support"
+ depends on SOC_CAMERA && I2C
help
- Select this if your MT9V022 camera uses a PCA9536 I2C GPIO
- extender to switch between 8 and 10 bit datawidth modes
+ This is a tw9910 video driver
config SOC_CAMERA_PLATFORM
tristate "platform camera support"
help
This is a ov772x camera driver
+config MX1_VIDEO
+ bool
+
+config VIDEO_MX1
+ tristate "i.MX1/i.MXL CMOS Sensor Interface driver"
+ depends on VIDEO_DEV && ARCH_MX1 && SOC_CAMERA
+ select FIQ
+ select VIDEOBUF_DMA_CONTIG
+ select MX1_VIDEO
+ ---help---
+ This is a v4l2 driver for the i.MX1/i.MXL CMOS Sensor Interface
+
+config MX3_VIDEO
+ bool
+
+config VIDEO_MX3
+ tristate "i.MX3x Camera Sensor Interface driver"
+ depends on VIDEO_DEV && MX3_IPU && SOC_CAMERA
+ select VIDEOBUF_DMA_CONTIG
+ select MX3_VIDEO
+ ---help---
+ This is a v4l2 driver for the i.MX3x Camera Sensor Interface
+
config VIDEO_PXA27x
tristate "PXA27x Quick Capture Interface driver"
depends on VIDEO_DEV && PXA27x && SOC_CAMERA
---help---
This is a v4l2 driver for the SuperH Mobile CEU Interface
+config VIDEO_OMAP2
+ tristate "OMAP2 Camera Capture Interface driver"
+ depends on VIDEO_DEV && ARCH_OMAP2
+ select VIDEOBUF_DMA_SG
+ ---help---
+ This is a v4l2 driver for the TI OMAP2 camera capture interface
+
#
# USB Multimedia device configuration
#
source "drivers/media/video/pvrusb2/Kconfig"
+source "drivers/media/video/hdpvr/Kconfig"
+
source "drivers/media/video/em28xx/Kconfig"
+source "drivers/media/video/cx231xx/Kconfig"
+
source "drivers/media/video/usbvision/Kconfig"
source "drivers/media/video/usbvideo/Kconfig"
module will be called w9968cf.
config USB_OV511
- tristate "USB OV511 Camera support"
+ tristate "USB OV511 Camera support (DEPRECATED)"
depends on VIDEO_V4L1
---help---
+ This driver is DEPRECATED please use the gspca ov519 module
+ instead. Note that for the ov511 / ov518 support of the gspca module
+ you need atleast version 0.6.0 of libv4l.
+
Say Y here if you want to connect this type of camera to your
computer's USB port. See <file:Documentation/video4linux/ov511.txt>
for more information and for a list of supported cameras.
config USB_ZR364XX
tristate "USB ZR364XX Camera support"
depends on VIDEO_V4L2
+ select VIDEOBUF_GEN
+ select VIDEOBUF_VMALLOC
---help---
Say Y here if you want to connect this type of camera to your
computer's USB port.
This driver can be compiled as a module, called s2255drv.
endif # V4L_USB_DRIVERS
-
endif # VIDEO_CAPTURE_DRIVERS
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff