module will be called cs53l32a.
config VIDEO_M52790
- tristate "Mitsubishi M52790 A/V switch"
- depends on VIDEO_V4L2 && I2C
- ---help---
+ tristate "Mitsubishi M52790 A/V switch"
+ depends on VIDEO_V4L2 && I2C
+ ---help---
Support for the Mitsubishi M52790 A/V switch.
To compile this driver as a module, choose M here: the
comment "Video decoders"
+config VIDEO_ADV7180
+ tristate "Analog Devices ADV7180 decoder"
+ depends on VIDEO_V4L2 && I2C
+ ---help---
+ Support for the Analog Devices ADV7180 video decoder.
+
+ To compile this driver as a module, choose M here: the
+ module will be called adv7180.
+
config VIDEO_BT819
tristate "BT819A VideoStream decoder"
depends on VIDEO_V4L2 && I2C
OV7670 VGA camera. It currently only works with the M88ALP01
controller.
+config VIDEO_MT9V011
+ tristate "Micron mt9v011 sensor support"
+ depends on I2C && VIDEO_V4L2
+ ---help---
+ This is a Video4Linux2 sensor-level driver for the Micron
+ mt0v011 1.3 Mpixel camera. It currently only works with the
+ em28xx driver.
+
config VIDEO_TCM825X
tristate "TCM825x camera sensor support"
depends on I2C && VIDEO_V4L2
To compile this driver as a module, choose M here: the
module will be called adv7175.
+config VIDEO_THS7303
+ tristate "THS7303 Video Amplifier"
+ depends on I2C
+ help
+ Support for TI THS7303 video amplifier
+
+ To compile this driver as a module, choose M here: the
+ module will be called ths7303.
+
+config VIDEO_ADV7343
+ tristate "ADV7343 video encoder"
+ depends on I2C
+ help
+ Support for Analog Devices I2C bus based ADV7343 encoder.
+
+ To compile this driver as a module, choose M here: the
+ module will be called adv7343.
+
comment "Video improvement chips"
config VIDEO_UPD64031A
endmenu # encoder / decoder chips
+config DISPLAY_DAVINCI_DM646X_EVM
+ tristate "DM646x EVM Video Display"
+ depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM
+ select VIDEOBUF_DMA_CONTIG
+ select VIDEO_DAVINCI_VPIF
+ select VIDEO_ADV7343
+ select VIDEO_THS7303
+ help
+ Support for DM6467 based display device.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vpif_display.
+
+config CAPTURE_DAVINCI_DM646X_EVM
+ tristate "DM646x EVM Video Capture"
+ depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM
+ select VIDEOBUF_DMA_CONTIG
+ select VIDEO_DAVINCI_VPIF
+ help
+ Support for DM6467 based capture device.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vpif_capture.
+
+config VIDEO_DAVINCI_VPIF
+ tristate "DaVinci VPIF Driver"
+ depends on DISPLAY_DAVINCI_DM646X_EVM
+ help
+ Support for DaVinci VPIF Driver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vpif.
+
config VIDEO_VIVI
tristate "Virtual Video Driver"
depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64
Say Y here if you want to test video apps or debug V4L devices.
In doubt, say N.
+config VIDEO_VPSS_SYSTEM
+ tristate "VPSS System module driver"
+ depends on ARCH_DAVINCI
+ help
+ Support for vpss system module for video driver
+ default y
+
+config VIDEO_VPFE_CAPTURE
+ tristate "VPFE Video Capture Driver"
+ depends on VIDEO_V4L2 && ARCH_DAVINCI
+ select VIDEOBUF_DMA_CONTIG
+ help
+ Support for DMXXXX VPFE based frame grabber. This is the
+ common V4L2 module for following DMXXX SoCs from Texas
+ Instruments:- DM6446 & DM355.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vpfe-capture.
+
+config VIDEO_DM6446_CCDC
+ tristate "DM6446 CCDC HW module"
+ depends on ARCH_DAVINCI_DM644x && VIDEO_VPFE_CAPTURE
+ select VIDEO_VPSS_SYSTEM
+ default y
+ help
+ Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces
+ with decoder modules such as TVP5146 over BT656 or
+ sensor module such as MT9T001 over a raw interface. This
+ module configures the interface and CCDC/ISIF to do
+ video frame capture from slave decoders.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vpfe.
+
+config VIDEO_DM355_CCDC
+ tristate "DM355 CCDC HW module"
+ depends on ARCH_DAVINCI_DM355 && VIDEO_VPFE_CAPTURE
+ select VIDEO_VPSS_SYSTEM
+ default y
+ help
+ Enables DM355 CCD hw module. DM355 CCDC hw interfaces
+ with decoder modules such as TVP5146 over BT656 or
+ sensor module such as MT9T001 over a raw interface. This
+ module configures the interface and CCDC/ISIF to do
+ video frame capture from a slave decoders
+
+ To compile this driver as a module, choose M here: the
+ module will be called vpfe.
+
source "drivers/media/video/bt8xx/Kconfig"
config VIDEO_PMS
source "drivers/media/video/cx18/Kconfig"
+source "drivers/media/video/saa7164/Kconfig"
+
config VIDEO_M32R_AR
tristate "AR devices"
depends on M32R && VIDEO_V4L1
config SOC_CAMERA
tristate "SoC camera support"
- depends on VIDEO_V4L2 && HAS_DMA
+ depends on VIDEO_V4L2 && HAS_DMA && I2C
select VIDEOBUF_GEN
help
SoC Camera is a common API to several cameras, not connecting
module will be called w9968cf.
config USB_OV511
- tristate "USB OV511 Camera support"
+ tristate "USB OV511 Camera support (DEPRECATED)"
depends on VIDEO_V4L1
---help---
+ This driver is DEPRECATED please use the gspca ov519 module
+ instead. Note that for the ov511 / ov518 support of the gspca module
+ you need atleast version 0.6.0 of libv4l.
+
Say Y here if you want to connect this type of camera to your
computer's USB port. See <file:Documentation/video4linux/ov511.txt>
for more information and for a list of supported cameras.
config USB_ZR364XX
tristate "USB ZR364XX Camera support"
depends on VIDEO_V4L2
+ select VIDEOBUF_GEN
+ select VIDEOBUF_VMALLOC
---help---
Say Y here if you want to connect this type of camera to your
computer's USB port.