select VIDEOBUF_GEN
config VIDEO_BTCX
+ depends on PCI
tristate
config VIDEO_IR
V4L devices.
In doubt, say N.
+config VIDEO_FIXED_MINOR_RANGES
+ bool "Enable old-style fixed minor ranges for video devices"
+ default n
+ ---help---
+ Say Y here to enable the old-style fixed-range minor assignments.
+ Only useful if you rely on the old behavior and use mknod instead of udev.
+
+ When in doubt, say N.
+
config VIDEO_HELPER_CHIPS_AUTO
bool "Autoselect pertinent encoders/decoders and other helper chips"
default y
config VIDEO_CS5345
tristate "Cirrus Logic CS5345 audio ADC"
- depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
+ depends on VIDEO_V4L2 && I2C
---help---
Support for the Cirrus Logic CS5345 24-bit, 192 kHz
stereo A/D converter.
module will be called cs53l32a.
config VIDEO_M52790
- tristate "Mitsubishi M52790 A/V switch"
- depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
- ---help---
+ tristate "Mitsubishi M52790 A/V switch"
+ depends on VIDEO_V4L2 && I2C
+ ---help---
Support for the Mitsubishi M52790 A/V switch.
To compile this driver as a module, choose M here: the
config VIDEO_VP27SMPX
tristate "Panasonic VP27s internal MPX"
- depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
+ depends on VIDEO_V4L2 && I2C
---help---
Support for the internal MPX of the Panasonic VP27s tuner.
To compile this driver as a module, choose M here: the
module will be called vp27smpx.
+comment "RDS decoders"
+
+config VIDEO_SAA6588
+ tristate "SAA6588 Radio Chip RDS decoder support"
+ depends on VIDEO_V4L2 && I2C
+
+ help
+ Support for this Radio Data System (RDS) decoder. This allows
+ seeing radio station identification transmitted using this
+ standard.
+
+ To compile this driver as a module, choose M here: the
+ module will be called saa6588.
+
comment "Video decoders"
+config VIDEO_ADV7180
+ tristate "Analog Devices ADV7180 decoder"
+ depends on VIDEO_V4L2 && I2C
+ ---help---
+ Support for the Analog Devices ADV7180 video decoder.
+
+ To compile this driver as a module, choose M here: the
+ module will be called adv7180.
+
config VIDEO_BT819
tristate "BT819A VideoStream decoder"
- depends on VIDEO_V4L1 && I2C
+ depends on VIDEO_V4L2 && I2C
---help---
Support for BT819A video decoder.
config VIDEO_BT856
tristate "BT856 VideoStream decoder"
- depends on VIDEO_V4L1 && I2C
+ depends on VIDEO_V4L2 && I2C
---help---
Support for BT856 video decoder.
config VIDEO_BT866
tristate "BT866 VideoStream decoder"
- depends on VIDEO_V4L1 && I2C
+ depends on VIDEO_V4L2 && I2C
---help---
Support for BT866 video decoder.
config VIDEO_KS0127
tristate "KS0127 video decoder"
- depends on VIDEO_V4L1 && I2C
+ depends on VIDEO_V4L2 && I2C
---help---
Support for KS0127 video decoder.
OV7670 VGA camera. It currently only works with the M88ALP01
controller.
+config VIDEO_MT9V011
+ tristate "Micron mt9v011 sensor support"
+ depends on I2C && VIDEO_V4L2
+ ---help---
+ This is a Video4Linux2 sensor-level driver for the Micron
+ mt0v011 1.3 Mpixel camera. It currently only works with the
+ em28xx driver.
+
config VIDEO_TCM825X
tristate "TCM825x camera sensor support"
depends on I2C && VIDEO_V4L2
config VIDEO_SAA7110
tristate "Philips SAA7110 video decoder"
- depends on VIDEO_V4L1 && I2C
+ depends on VIDEO_V4L2 && I2C
---help---
Support for the Philips SAA7110 video decoders.
To compile this driver as a module, choose M here: the
module will be called saa7110.
-config VIDEO_SAA7111
- tristate "Philips SAA7111 video decoder"
- depends on VIDEO_V4L1 && I2C
- ---help---
- Support for the Philips SAA711 video decoder.
-
- To compile this driver as a module, choose M here: the
- module will be called saa7111.
-
-config VIDEO_SAA7114
- tristate "Philips SAA7114 video decoder"
- depends on VIDEO_V4L1 && I2C
- ---help---
- Support for the Philips SAA7114 video decoder. This driver
- is used only on Zoran driver and should be moved soon to
- SAA711x module.
-
- To compile this driver as a module, choose M here: the
- module will be called saa7114.
-
config VIDEO_SAA711X
- tristate "Philips SAA7113/4/5 video decoders"
+ tristate "Philips SAA7111/3/4/5 video decoders"
depends on VIDEO_V4L2 && I2C
---help---
- Support for the Philips SAA7113/4/5 video decoders.
+ Support for the Philips SAA7111/3/4/5 video decoders.
To compile this driver as a module, choose M here: the
module will be called saa7115.
To compile this driver as a module, choose M here: the
module will be called saa7191.
+config VIDEO_TVP514X
+ tristate "Texas Instruments TVP514x video decoder"
+ depends on VIDEO_V4L2 && I2C
+ ---help---
+ This is a Video4Linux2 sensor-level driver for the TI TVP5146/47
+ decoder. It is currently working with the TI OMAP3 camera
+ controller.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tvp514x.
+
config VIDEO_TVP5150
tristate "Texas Instruments TVP5150 video decoder"
depends on VIDEO_V4L2 && I2C
config VIDEO_VPX3220
tristate "vpx3220a, vpx3216b & vpx3214c video decoders"
- depends on VIDEO_V4L1 && I2C
+ depends on VIDEO_V4L2 && I2C
---help---
Support for VPX322x video decoders.
config VIDEO_CX2341X
tristate "Conexant CX2341x MPEG encoders"
- depends on VIDEO_V4L2 && EXPERIMENTAL && VIDEO_V4L2_COMMON
+ depends on VIDEO_V4L2 && VIDEO_V4L2_COMMON
---help---
Support for the Conexant CX23416 MPEG encoders
and CX23415 MPEG encoder/decoders.
config VIDEO_SAA7185
tristate "Philips SAA7185 video encoder"
- depends on VIDEO_V4L1 && I2C
+ depends on VIDEO_V4L2 && I2C
---help---
Support for the Philips SAA7185 video encoder.
config VIDEO_ADV7170
tristate "Analog Devices ADV7170 video encoder"
- depends on VIDEO_V4L1 && I2C
+ depends on VIDEO_V4L2 && I2C
---help---
Support for the Analog Devices ADV7170 video encoder driver
config VIDEO_ADV7175
tristate "Analog Devices ADV7175 video encoder"
- depends on VIDEO_V4L1 && I2C
+ depends on VIDEO_V4L2 && I2C
---help---
Support for the Analog Devices ADV7175 video encoder driver
To compile this driver as a module, choose M here: the
module will be called adv7175.
+config VIDEO_THS7303
+ tristate "THS7303 Video Amplifier"
+ depends on I2C
+ help
+ Support for TI THS7303 video amplifier
+
+ To compile this driver as a module, choose M here: the
+ module will be called ths7303.
+
+config VIDEO_ADV7343
+ tristate "ADV7343 video encoder"
+ depends on I2C
+ help
+ Support for Analog Devices I2C bus based ADV7343 encoder.
+
+ To compile this driver as a module, choose M here: the
+ module will be called adv7343.
+
comment "Video improvement chips"
config VIDEO_UPD64031A
endmenu # encoder / decoder chips
+config DISPLAY_DAVINCI_DM646X_EVM
+ tristate "DM646x EVM Video Display"
+ depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM
+ select VIDEOBUF_DMA_CONTIG
+ select VIDEO_DAVINCI_VPIF
+ select VIDEO_ADV7343
+ select VIDEO_THS7303
+ help
+ Support for DM6467 based display device.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vpif_display.
+
+config CAPTURE_DAVINCI_DM646X_EVM
+ tristate "DM646x EVM Video Capture"
+ depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM
+ select VIDEOBUF_DMA_CONTIG
+ select VIDEO_DAVINCI_VPIF
+ help
+ Support for DM6467 based capture device.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vpif_capture.
+
+config VIDEO_DAVINCI_VPIF
+ tristate "DaVinci VPIF Driver"
+ depends on DISPLAY_DAVINCI_DM646X_EVM
+ help
+ Support for DaVinci VPIF Driver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vpif.
+
config VIDEO_VIVI
tristate "Virtual Video Driver"
depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64
Say Y here if you want to test video apps or debug V4L devices.
In doubt, say N.
-source "drivers/media/video/bt8xx/Kconfig"
-
-config VIDEO_SAA6588
- tristate "SAA6588 Radio Chip RDS decoder support on BT848 cards"
- depends on I2C && VIDEO_BT848
+config VIDEO_VPSS_SYSTEM
+ tristate "VPSS System module driver"
+ depends on ARCH_DAVINCI
+ help
+ Support for vpss system module for video driver
+ default y
+config VIDEO_VPFE_CAPTURE
+ tristate "VPFE Video Capture Driver"
+ depends on VIDEO_V4L2 && ARCH_DAVINCI
+ select VIDEOBUF_DMA_CONTIG
help
- Support for Radio Data System (RDS) decoder. This allows seeing
- radio station identification transmitted using this standard.
- Currently, it works only with bt8x8 chips.
+ Support for DMXXXX VPFE based frame grabber. This is the
+ common V4L2 module for following DMXXX SoCs from Texas
+ Instruments:- DM6446 & DM355.
To compile this driver as a module, choose M here: the
- module will be called saa6588.
+ module will be called vpfe-capture.
+
+config VIDEO_DM6446_CCDC
+ tristate "DM6446 CCDC HW module"
+ depends on ARCH_DAVINCI_DM644x && VIDEO_VPFE_CAPTURE
+ select VIDEO_VPSS_SYSTEM
+ default y
+ help
+ Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces
+ with decoder modules such as TVP5146 over BT656 or
+ sensor module such as MT9T001 over a raw interface. This
+ module configures the interface and CCDC/ISIF to do
+ video frame capture from slave decoders.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vpfe.
+
+config VIDEO_DM355_CCDC
+ tristate "DM355 CCDC HW module"
+ depends on ARCH_DAVINCI_DM355 && VIDEO_VPFE_CAPTURE
+ select VIDEO_VPSS_SYSTEM
+ default y
+ help
+ Enables DM355 CCD hw module. DM355 CCDC hw interfaces
+ with decoder modules such as TVP5146 over BT656 or
+ sensor module such as MT9T001 over a raw interface. This
+ module configures the interface and CCDC/ISIF to do
+ video frame capture from a slave decoders
+
+ To compile this driver as a module, choose M here: the
+ module will be called vpfe.
+
+source "drivers/media/video/bt8xx/Kconfig"
config VIDEO_PMS
tristate "Mediavision Pro Movie Studio Video For Linux"
To compile this driver as a module, choose M here: the
module will be called pms.
-config VIDEO_PLANB
- tristate "PlanB Video-In on PowerMac"
- depends on PPC_PMAC && VIDEO_V4L1 && BROKEN
- help
- PlanB is the V4L driver for the PowerMac 7x00/8x00 series video
- input hardware. If you want to experiment with this, say Y.
- Otherwise, or if you don't understand a word, say N. See
- <http://www.cpu.lu/~mlan/linux/dev/planb.html> for more info.
-
- Saying M will compile this driver as a module (planb).
-
config VIDEO_BWQCAM
tristate "Quickcam BW Video For Linux"
depends on PARPORT && VIDEO_V4L1
To compile this driver as a module, choose M here: the
module will be called saa5249.
-config TUNER_3036
- tristate "SAB3036 tuner"
- depends on I2C && VIDEO_V4L1
- help
- Say Y here to include support for Philips SAB3036 compatible tuners.
- If in doubt, say N.
-
config VIDEO_VINO
tristate "SGI Vino Video For Linux (EXPERIMENTAL)"
depends on I2C && SGI_IP22 && EXPERIMENTAL && VIDEO_V4L2
- select I2C_ALGO_SGI
select VIDEO_SAA7191 if VIDEO_HELPER_CHIPS_AUTO
help
Say Y here to build in support for the Vino video input system found
driver for PCI. There is a product page at
<http://www.stradis.com/>.
-config VIDEO_ZORAN
- tristate "Zoran ZR36057/36067 Video For Linux"
- depends on PCI && I2C_ALGOBIT && VIDEO_V4L1 && VIRT_TO_BUS
- help
- Say Y for support for MJPEG capture cards based on the Zoran
- 36057/36067 PCI controller chipset. This includes the Iomega
- Buz, Pinnacle DC10+ and the Linux Media Labs LML33. There is
- a driver homepage at <http://mjpeg.sf.net/driver-zoran/>. For
- more information, check <file:Documentation/video4linux/Zoran>.
-
- To compile this driver as a module, choose M here: the
- module will be called zr36067.
-
-config VIDEO_ZORAN_DC30
- tristate "Pinnacle/Miro DC30(+) support"
- depends on VIDEO_ZORAN
- select VIDEO_ADV7175 if VIDEO_HELPER_CHIPS_AUTO
- select VIDEO_VPX3220 if VIDEO_HELPER_CHIPS_AUTO
- help
- Support for the Pinnacle/Miro DC30(+) MJPEG capture/playback
- card. This also supports really old DC10 cards based on the
- zr36050 MJPEG codec and zr36016 VFE.
-
-config VIDEO_ZORAN_ZR36060
- tristate "Zoran ZR36060"
- depends on VIDEO_ZORAN
- help
- Say Y to support Zoran boards based on 36060 chips.
- This includes Iomega Bus, Pinnacle DC10, Linux media Labs 33
- and 33 R10 and AverMedia 6 boards.
-
-config VIDEO_ZORAN_BUZ
- tristate "Iomega Buz support"
- depends on VIDEO_ZORAN_ZR36060
- select VIDEO_SAA7111 if VIDEO_HELPER_CHIPS_AUTO
- select VIDEO_SAA7185 if VIDEO_HELPER_CHIPS_AUTO
- help
- Support for the Iomega Buz MJPEG capture/playback card.
-
-config VIDEO_ZORAN_DC10
- tristate "Pinnacle/Miro DC10(+) support"
- depends on VIDEO_ZORAN_ZR36060
- select VIDEO_SAA7110 if VIDEO_HELPER_CHIPS_AUTO
- select VIDEO_ADV7175 if VIDEO_HELPER_CHIPS_AUTO
- help
- Support for the Pinnacle/Miro DC10(+) MJPEG capture/playback
- card.
-
-config VIDEO_ZORAN_LML33
- tristate "Linux Media Labs LML33 support"
- depends on VIDEO_ZORAN_ZR36060
- select VIDEO_BT819 if VIDEO_HELPER_CHIPS_AUTO
- select VIDEO_BT856 if VIDEO_HELPER_CHIPS_AUTO
- help
- Support for the Linux Media Labs LML33 MJPEG capture/playback
- card.
-
-config VIDEO_ZORAN_LML33R10
- tristate "Linux Media Labs LML33R10 support"
- depends on VIDEO_ZORAN_ZR36060
- select VIDEO_SAA7114 if VIDEO_HELPER_CHIPS_AUTO
- select VIDEO_ADV7170 if VIDEO_HELPER_CHIPS_AUTO
- help
- support for the Linux Media Labs LML33R10 MJPEG capture/playback
- card.
-
-config VIDEO_ZORAN_AVS6EYES
- tristate "AverMedia 6 Eyes support (EXPERIMENTAL)"
- depends on VIDEO_ZORAN_ZR36060 && EXPERIMENTAL && VIDEO_V4L1
- select VIDEO_BT856 if VIDEO_HELPER_CHIPS_AUTO
- select VIDEO_KS0127 if VIDEO_HELPER_CHIPS_AUTO
- help
- Support for the AverMedia 6 Eyes video surveillance card.
+source "drivers/media/video/zoran/Kconfig"
config VIDEO_MEYE
tristate "Sony Vaio Picturebook Motion Eye Video For Linux"
depends on PCI && VIDEO_V4L1 && I2C
select VIDEO_SAA7146_VV
select VIDEO_TUNER
- select VIDEO_SAA7111 if VIDEO_HELPER_CHIPS_AUTO
+ select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO
select VIDEO_TDA9840 if VIDEO_HELPER_CHIPS_AUTO
select VIDEO_TEA6415C if VIDEO_HELPER_CHIPS_AUTO
select VIDEO_TEA6420 if VIDEO_HELPER_CHIPS_AUTO
To compile this driver as a module, choose M here: the
module will be called mxb.
-config VIDEO_DPC
- tristate "Philips-Semiconductors 'dpc7146 demonstration board'"
- depends on PCI && VIDEO_V4L1 && I2C
- select VIDEO_SAA7146_VV
- select VIDEO_SAA7111 if VIDEO_HELPER_CHIPS_AUTO
- ---help---
- This is a video4linux driver for the 'dpc7146 demonstration
- board' by Philips-Semiconductors. It's the reference design
- for SAA7146 bases boards, so if you have some unsupported
- saa7146 based, analog video card, chances are good that it
- will work with this skeleton driver.
-
- To compile this driver as a module, choose M here: the
- module will be called dpc7146.
-
config VIDEO_HEXIUM_ORION
tristate "Hexium HV-PCI6 and Orion frame grabber"
depends on PCI && VIDEO_V4L2 && I2C
source "drivers/media/video/cx18/Kconfig"
+source "drivers/media/video/saa7164/Kconfig"
+
config VIDEO_M32R_AR
tristate "AR devices"
depends on M32R && VIDEO_V4L1
CMOS camera controller. This is the controller found on first-
generation OLPC systems.
+config SOC_CAMERA
+ tristate "SoC camera support"
+ depends on VIDEO_V4L2 && HAS_DMA && I2C
+ select VIDEOBUF_GEN
+ help
+ SoC Camera is a common API to several cameras, not connecting
+ over a bus like PCI or USB. For example some i2c camera connected
+ directly to the data bus of an SoC.
+
+config SOC_CAMERA_MT9M001
+ tristate "mt9m001 support"
+ depends on SOC_CAMERA && I2C
+ select GPIO_PCA953X if MT9M001_PCA9536_SWITCH
+ help
+ This driver supports MT9M001 cameras from Micron, monochrome
+ and colour models.
+
+config SOC_CAMERA_MT9M111
+ tristate "mt9m111 and mt9m112 support"
+ depends on SOC_CAMERA && I2C
+ help
+ This driver supports MT9M111 and MT9M112 cameras from Micron
+
+config SOC_CAMERA_MT9T031
+ tristate "mt9t031 support"
+ depends on SOC_CAMERA && I2C
+ help
+ This driver supports MT9T031 cameras from Micron.
+
+config SOC_CAMERA_MT9V022
+ tristate "mt9v022 support"
+ depends on SOC_CAMERA && I2C
+ select GPIO_PCA953X if MT9V022_PCA9536_SWITCH
+ help
+ This driver supports MT9V022 cameras from Micron
+
+config SOC_CAMERA_TW9910
+ tristate "tw9910 support"
+ depends on SOC_CAMERA && I2C
+ help
+ This is a tw9910 video driver
+
+config SOC_CAMERA_PLATFORM
+ tristate "platform camera support"
+ depends on SOC_CAMERA
+ help
+ This is a generic SoC camera platform driver, useful for testing
+
+config SOC_CAMERA_OV772X
+ tristate "ov772x camera support"
+ depends on SOC_CAMERA && I2C
+ help
+ This is a ov772x camera driver
+
+config MX1_VIDEO
+ bool
+
+config VIDEO_MX1
+ tristate "i.MX1/i.MXL CMOS Sensor Interface driver"
+ depends on VIDEO_DEV && ARCH_MX1 && SOC_CAMERA
+ select FIQ
+ select VIDEOBUF_DMA_CONTIG
+ select MX1_VIDEO
+ ---help---
+ This is a v4l2 driver for the i.MX1/i.MXL CMOS Sensor Interface
+
+config MX3_VIDEO
+ bool
+
+config VIDEO_MX3
+ tristate "i.MX3x Camera Sensor Interface driver"
+ depends on VIDEO_DEV && MX3_IPU && SOC_CAMERA
+ select VIDEOBUF_DMA_CONTIG
+ select MX3_VIDEO
+ ---help---
+ This is a v4l2 driver for the i.MX3x Camera Sensor Interface
+
+config VIDEO_PXA27x
+ tristate "PXA27x Quick Capture Interface driver"
+ depends on VIDEO_DEV && PXA27x && SOC_CAMERA
+ select VIDEOBUF_DMA_SG
+ ---help---
+ This is a v4l2 driver for the PXA27x Quick Capture Interface
+
+config VIDEO_SH_MOBILE_CEU
+ tristate "SuperH Mobile CEU Interface driver"
+ depends on VIDEO_DEV && SOC_CAMERA && HAS_DMA && HAVE_CLK
+ select VIDEOBUF_DMA_CONTIG
+ ---help---
+ This is a v4l2 driver for the SuperH Mobile CEU Interface
+
+config VIDEO_OMAP2
+ tristate "OMAP2 Camera Capture Interface driver"
+ depends on VIDEO_DEV && ARCH_OMAP2
+ select VIDEOBUF_DMA_SG
+ ---help---
+ This is a v4l2 driver for the TI OMAP2 camera capture interface
+
#
# USB Multimedia device configuration
#
source "drivers/media/video/pvrusb2/Kconfig"
+source "drivers/media/video/hdpvr/Kconfig"
+
source "drivers/media/video/em28xx/Kconfig"
+source "drivers/media/video/cx231xx/Kconfig"
+
source "drivers/media/video/usbvision/Kconfig"
source "drivers/media/video/usbvideo/Kconfig"
config USB_W9968CF
tristate "USB W996[87]CF JPEG Dual Mode Camera support"
- depends on VIDEO_V4L1 && I2C
- select VIDEO_OVCAMCHIP
+ depends on VIDEO_V4L1 && I2C && VIDEO_OVCAMCHIP
---help---
Say Y here if you want support for cameras based on OV681 or
Winbond W9967CF/W9968CF JPEG USB Dual Mode Camera Chips.
module will be called w9968cf.
config USB_OV511
- tristate "USB OV511 Camera support"
+ tristate "USB OV511 Camera support (DEPRECATED)"
depends on VIDEO_V4L1
---help---
+ This driver is DEPRECATED please use the gspca ov519 module
+ instead. Note that for the ov511 / ov518 support of the gspca module
+ you need atleast version 0.6.0 of libv4l.
+
Say Y here if you want to connect this type of camera to your
computer's USB port. See <file:Documentation/video4linux/ov511.txt>
for more information and for a list of supported cameras.
config USB_ZR364XX
tristate "USB ZR364XX Camera support"
depends on VIDEO_V4L2
+ select VIDEOBUF_GEN
+ select VIDEOBUF_VMALLOC
---help---
Say Y here if you want to connect this type of camera to your
computer's USB port.
This driver can be compiled as a module, called s2255drv.
endif # V4L_USB_DRIVERS
-
-config SOC_CAMERA
- tristate "SoC camera support"
- depends on VIDEO_V4L2 && HAS_DMA
- select VIDEOBUF_GEN
- help
- SoC Camera is a common API to several cameras, not connecting
- over a bus like PCI or USB. For example some i2c camera connected
- directly to the data bus of an SoC.
-
-config SOC_CAMERA_MT9M001
- tristate "mt9m001 support"
- depends on SOC_CAMERA && I2C
- select GPIO_PCA953X if MT9M001_PCA9536_SWITCH
- help
- This driver supports MT9M001 cameras from Micron, monochrome
- and colour models.
-
-config MT9M001_PCA9536_SWITCH
- bool "pca9536 datawidth switch for mt9m001"
- depends on SOC_CAMERA_MT9M001 && GENERIC_GPIO
- help
- Select this if your MT9M001 camera uses a PCA9536 I2C GPIO
- extender to switch between 8 and 10 bit datawidth modes
-
-config SOC_CAMERA_MT9V022
- tristate "mt9v022 support"
- depends on SOC_CAMERA && I2C
- select GPIO_PCA953X if MT9V022_PCA9536_SWITCH
- help
- This driver supports MT9V022 cameras from Micron
-
-config MT9V022_PCA9536_SWITCH
- bool "pca9536 datawidth switch for mt9v022"
- depends on SOC_CAMERA_MT9V022 && GENERIC_GPIO
- help
- Select this if your MT9V022 camera uses a PCA9536 I2C GPIO
- extender to switch between 8 and 10 bit datawidth modes
-
-config SOC_CAMERA_PLATFORM
- tristate "platform camera support"
- depends on SOC_CAMERA
- help
- This is a generic SoC camera platform driver, useful for testing
-
-config VIDEO_PXA27x
- tristate "PXA27x Quick Capture Interface driver"
- depends on VIDEO_DEV && PXA27x
- select SOC_CAMERA
- select VIDEOBUF_DMA_SG
- ---help---
- This is a v4l2 driver for the PXA27x Quick Capture Interface
-
-config VIDEO_SH_MOBILE_CEU
- tristate "SuperH Mobile CEU Interface driver"
- depends on VIDEO_DEV
- select SOC_CAMERA
- select VIDEOBUF_DMA_CONTIG
- ---help---
- This is a v4l2 driver for the SuperH Mobile CEU Interface
-
endif # VIDEO_CAPTURE_DRIVERS