# Multimedia Video device configuration
#
-menu "Video For Linux"
+menu "Video Capture Adapters"
depends on VIDEO_DEV
-comment "Video Adapters"
+comment "Video Capture Adapters"
config VIDEO_ADV_DEBUG
bool "Enable advanced debug functionality"
V4L devices.
In doubt, say N.
+config VIDEO_VIVI
+ tristate "Virtual Video Driver"
+ depends on VIDEO_V4L2 && !SPARC32 && !SPARC64
+ select VIDEO_BUF
+ default n
+ ---help---
+ Enables a virtual video driver. This device shows a color bar
+ and a timestamp, as a real device would generate by using V4L2
+ api.
+ Say Y here if you want to test video apps or debug V4L devices.
+ In doubt, say N.
+
source "drivers/media/video/bt8xx/Kconfig"
config VIDEO_SAA6588
tristate "SAA6588 Radio Chip RDS decoder support on BT848 cards"
- depends on VIDEO_DEV && I2C && VIDEO_BT848
+ depends on I2C && VIDEO_BT848
help
Support for Radio Data System (RDS) decoder. This allows seeing
config VIDEO_PMS
tristate "Mediavision Pro Movie Studio Video For Linux"
- depends on VIDEO_DEV && ISA
+ depends on ISA && VIDEO_V4L1
help
Say Y if you have such a thing.
config VIDEO_PLANB
tristate "PlanB Video-In on PowerMac"
- depends on PPC_PMAC && VIDEO_DEV && BROKEN
+ depends on PPC_PMAC && VIDEO_V4L1 && BROKEN
help
PlanB is the V4L driver for the PowerMac 7x00/8x00 series video
input hardware. If you want to experiment with this, say Y.
config VIDEO_BWQCAM
tristate "Quickcam BW Video For Linux"
- depends on VIDEO_DEV && PARPORT
+ depends on PARPORT && VIDEO_V4L1
help
Say Y have if you the black and white version of the QuickCam
camera. See the next option for the color version.
config VIDEO_CQCAM
tristate "QuickCam Colour Video For Linux (EXPERIMENTAL)"
- depends on EXPERIMENTAL && VIDEO_DEV && PARPORT
+ depends on EXPERIMENTAL && PARPORT && VIDEO_V4L1
help
This is the video4linux driver for the colour version of the
Connectix QuickCam. If you have one of these cameras, say Y here,
config VIDEO_W9966
tristate "W9966CF Webcam (FlyCam Supra and others) Video For Linux"
- depends on PARPORT_1284 && VIDEO_DEV && PARPORT
+ depends on PARPORT_1284 && PARPORT && VIDEO_V4L1
help
Video4linux driver for Winbond's w9966 based Webcams.
Currently tested with the LifeView FlyCam Supra.
config VIDEO_CPIA
tristate "CPiA Video For Linux"
- depends on VIDEO_DEV
+ depends on VIDEO_V4L1
---help---
This is the video4linux driver for cameras based on Vision's CPiA
(Colour Processor Interface ASIC), such as the Creative Labs Video
config VIDEO_SAA5246A
tristate "SAA5246A, SAA5281 Teletext processor"
- depends on VIDEO_DEV && I2C
+ depends on I2C && VIDEO_V4L1
help
Support for I2C bus based teletext using the SAA5246A or SAA5281
chip. Useful only if you live in Europe.
config VIDEO_SAA5249
tristate "SAA5249 Teletext processor"
- depends on VIDEO_DEV && I2C
+ depends on VIDEO_DEV && I2C && VIDEO_V4L1
help
Support for I2C bus based teletext using the SAA5249 chip. At the
moment this is only useful on some European WinTV cards.
config TUNER_3036
tristate "SAB3036 tuner"
- depends on VIDEO_DEV && I2C
+ depends on VIDEO_DEV && I2C && VIDEO_V4L1
help
Say Y here to include support for Philips SAB3036 compatible tuners.
If in doubt, say N.
config VIDEO_VINO
tristate "SGI Vino Video For Linux (EXPERIMENTAL)"
- depends on VIDEO_DEV && I2C && SGI_IP22 && EXPERIMENTAL
+ depends on I2C && SGI_IP22 && EXPERIMENTAL && VIDEO_V4L1
select I2C_ALGO_SGI
help
Say Y here to build in support for the Vino video input system found
config VIDEO_STRADIS
tristate "Stradis 4:2:2 MPEG-2 video driver (EXPERIMENTAL)"
- depends on EXPERIMENTAL && VIDEO_DEV && PCI
+ depends on EXPERIMENTAL && PCI && VIDEO_V4L1 && !PPC64
help
Say Y here to enable support for the Stradis 4:2:2 MPEG-2 video
driver for PCI. There is a product page at
config VIDEO_ZORAN
tristate "Zoran ZR36057/36067 Video For Linux"
- depends on VIDEO_DEV && PCI && I2C_ALGOBIT
+ depends on PCI && I2C_ALGOBIT && VIDEO_V4L1 && !PPC64
help
Say Y for support for MJPEG capture cards based on the Zoran
36057/36067 PCI controller chipset. This includes the Iomega
support for the Linux Media Labs LML33R10 MJPEG capture/playback
card.
+config VIDEO_ZORAN_AVS6EYES
+ tristate "AverMedia 6 Eyes support (EXPERIMENTAL)"
+ depends on VIDEO_ZORAN && EXPERIMENTAL && VIDEO_V4L1
+ help
+ Support for the AverMedia 6 Eyes video surveillance card.
+
config VIDEO_ZR36120
tristate "Zoran ZR36120/36125 Video For Linux"
- depends on VIDEO_DEV && PCI && I2C && BROKEN
+ depends on PCI && I2C && VIDEO_V4L1 && BROKEN
help
Support for ZR36120/ZR36125 based frame grabber/overlay boards.
This includes the Victor II, WaveWatcher, Video Wonder, Maxi-TV,
config VIDEO_MEYE
tristate "Sony Vaio Picturebook Motion Eye Video For Linux"
- depends on VIDEO_DEV && PCI && SONYPI
+ depends on PCI && SONYPI && VIDEO_V4L1
---help---
This is the video4linux driver for the Motion Eye camera found
in the Vaio Picturebook laptops. Please read the material in
config VIDEO_MXB
tristate "Siemens-Nixdorf 'Multimedia eXtension Board'"
- depends on VIDEO_DEV && PCI
+ depends on PCI && VIDEO_V4L1 && I2C
select VIDEO_SAA7146_VV
select VIDEO_TUNER
---help---
config VIDEO_DPC
tristate "Philips-Semiconductors 'dpc7146 demonstration board'"
- depends on VIDEO_DEV && PCI
+ depends on PCI && VIDEO_V4L1 && I2C
select VIDEO_SAA7146_VV
+ select VIDEO_V4L2
---help---
This is a video4linux driver for the 'dpc7146 demonstration
board' by Philips-Semiconductors. It's the reference design
config VIDEO_HEXIUM_ORION
tristate "Hexium HV-PCI6 and Orion frame grabber"
- depends on VIDEO_DEV && PCI
+ depends on PCI && VIDEO_V4L1 && I2C
select VIDEO_SAA7146_VV
+ select VIDEO_V4L2
---help---
This is a video4linux driver for the Hexium HV-PCI6 and
Orion frame grabber cards by Hexium.
config VIDEO_HEXIUM_GEMINI
tristate "Hexium Gemini frame grabber"
- depends on VIDEO_DEV && PCI
+ depends on PCI && VIDEO_V4L1 && I2C
select VIDEO_SAA7146_VV
+ select VIDEO_V4L2
---help---
This is a video4linux driver for the Hexium Gemini frame
grabber card by Hexium. Please note that the Gemini Dual
source "drivers/media/video/cx88/Kconfig"
-config VIDEO_OVCAMCHIP
- tristate "OmniVision Camera Chip support"
- depends on VIDEO_DEV && I2C
- ---help---
- Support for the OmniVision OV6xxx and OV7xxx series of camera chips.
- This driver is intended to be used with the ov511 and w9968cf USB
- camera drivers.
-
- To compile this driver as a module, choose M here: the
- module will be called ovcamchip
-
config VIDEO_M32R_AR
tristate "AR devices"
- depends on M32R
+ depends on M32R && VIDEO_V4L1
---help---
This is a video4linux driver for the Renesas AR (Artificial Retina)
camera module.
Say Y here to use the Renesas M64278E-800 camera module,
which supports VGA(640x480 pixcels) size of images.
+#
+# Encoder / Decoder module configuration
+#
+
+menu "Encoders and Decoders"
+ depends on VIDEO_DEV
+
config VIDEO_MSP3400
tristate "Micronas MSP34xx audio decoders"
depends on VIDEO_DEV && I2C
Support for the Micronas MSP34xx series of audio decoders.
To compile this driver as a module, choose M here: the
- module will be called msp3400
+ module will be called msp3400.
config VIDEO_CS53L32A
tristate "Cirrus Logic CS53L32A audio ADC"
stereo A/D converter.
To compile this driver as a module, choose M here: the
- module will be called cs53l32a
+ module will be called cs53l32a.
-config VIDEO_WM8775
- tristate "Wolfson Microelectronics WM8775 audio ADC"
+config VIDEO_TLV320AIC23B
+ tristate "Texas Instruments TLV320AIC23B audio codec"
depends on VIDEO_DEV && I2C && EXPERIMENTAL
---help---
- Support for the Wolfson Microelectronics WM8775
- high performance stereo A/D Converter.
+ Support for the Texas Instruments TLV320AIC23B audio codec.
To compile this driver as a module, choose M here: the
- module will be called wm8775
-
-source "drivers/media/video/cx25840/Kconfig"
+ module will be called tlv320aic23b.
-config VIDEO_SAA711X
- tristate "Philips SAA7113/4/5 video decoders"
+config VIDEO_WM8775
+ tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer"
depends on VIDEO_DEV && I2C && EXPERIMENTAL
---help---
- Support for the Philips SAA7113/4/5 video decoders.
+ Support for the Wolfson Microelectronics WM8775 high
+ performance stereo A/D Converter with a 4 channel input mixer.
To compile this driver as a module, choose M here: the
- module will be called saa7115
+ module will be called wm8775.
-config VIDEO_SAA7127
- tristate "Philips SAA7127/9 digital video encoders"
+config VIDEO_WM8739
+ tristate "Wolfson Microelectronics WM8739 stereo audio ADC"
depends on VIDEO_DEV && I2C && EXPERIMENTAL
---help---
- Support for the Philips SAA7127/9 digital video encoders.
+ Support for the Wolfson Microelectronics WM8739
+ stereo A/D Converter.
To compile this driver as a module, choose M here: the
- module will be called saa7127
-
-#
-# USB Multimedia device configuration
-#
-
-menu "V4L USB devices"
- depends on USB && VIDEO_DEV
+ module will be called wm8739.
-source "drivers/media/video/em28xx/Kconfig"
-
-config USB_VICAM
- tristate "USB 3com HomeConnect (aka vicam) support (EXPERIMENTAL)"
- depends on USB && VIDEO_DEV && EXPERIMENTAL
+config VIDEO_CX2341X
+ tristate "Conexant CX2341x MPEG encoders"
+ depends on VIDEO_V4L2 && EXPERIMENTAL
---help---
- Say Y here if you have 3com homeconnect camera (vicam).
+ Support for the Conexant CX23416 MPEG encoders
+ and CX23415 MPEG encoder/decoders.
+
+ This module currently supports the encoding functions only.
To compile this driver as a module, choose M here: the
- module will be called vicam.
+ module will be called cx2341x.
-config USB_DSBR
- tristate "D-Link USB FM radio support (EXPERIMENTAL)"
- depends on USB && VIDEO_DEV && EXPERIMENTAL
+source "drivers/media/video/cx25840/Kconfig"
+
+config VIDEO_SAA711X
+ tristate "Philips SAA7113/4/5 video decoders"
+ depends on VIDEO_DEV && I2C && EXPERIMENTAL
---help---
- Say Y here if you want to connect this type of radio to your
- computer's USB port. Note that the audio is not digital, and
- you must connect the line out connector to a sound card or a
- set of speakers.
+ Support for the Philips SAA7113/4/5 video decoders.
To compile this driver as a module, choose M here: the
- module will be called dsbr100.
+ module will be called saa7115.
-config USB_ET61X251
- tristate "USB ET61X[12]51 PC Camera Controller support"
- depends on USB && VIDEO_DEV
+config VIDEO_SAA7127
+ tristate "Philips SAA7127/9 digital video encoders"
+ depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
---help---
- Say Y here if you want support for cameras based on Etoms ET61X151
- or ET61X251 PC Camera Controllers.
-
- See <file:Documentation/usb/et61x251.txt> for more informations.
+ Support for the Philips SAA7127/9 digital video encoders.
To compile this driver as a module, choose M here: the
- module will be called et61x251.
+ module will be called saa7127.
-config USB_IBMCAM
- tristate "USB IBM (Xirlink) C-it Camera support"
- depends on USB && VIDEO_DEV
+config VIDEO_UPD64031A
+ tristate "NEC Electronics uPD64031A Ghost Reduction"
+ depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
---help---
- Say Y here if you want to connect a IBM "C-It" camera, also known as
- "Xirlink PC Camera" to your computer's USB port. For more
- information, read <file:Documentation/usb/ibmcam.txt>.
+ Support for the NEC Electronics uPD64031A Ghost Reduction
+ video chip. It is most often found in NTSC TV cards made for
+ Japan and is used to reduce the 'ghosting' effect that can
+ be present in analog TV broadcasts.
To compile this driver as a module, choose M here: the
- module will be called ibmcam.
-
- This camera has several configuration options which
- can be specified when you load the module. Read
- <file:Documentation/usb/ibmcam.txt> to learn more.
+ module will be called upd64031a.
-config USB_KONICAWC
- tristate "USB Konica Webcam support"
- depends on USB && VIDEO_DEV
+config VIDEO_UPD64083
+ tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation"
+ depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
---help---
- Say Y here if you want support for webcams based on a Konica
- chipset. This is known to work with the Intel YC76 webcam.
+ Support for the NEC Electronics uPD64083 3-Dimensional Y/C
+ separation video chip. It is used to improve the quality of
+ the colors of a composite signal.
To compile this driver as a module, choose M here: the
- module will be called konicawc.
+ module will be called upd64083.
-config USB_OV511
- tristate "USB OV511 Camera support"
- depends on USB && VIDEO_DEV
- ---help---
- Say Y here if you want to connect this type of camera to your
- computer's USB port. See <file:Documentation/usb/ov511.txt> for more
- information and for a list of supported cameras.
+endmenu # encoder / decoder chips
- To compile this driver as a module, choose M here: the
- module will be called ov511.
+#
+# USB Multimedia device configuration
+#
-config USB_SE401
- tristate "USB SE401 Camera support"
+menu "V4L USB devices"
depends on USB && VIDEO_DEV
- ---help---
- Say Y here if you want to connect this type of camera to your
- computer's USB port. See <file:Documentation/usb/se401.txt> for more
- information and for a list of supported cameras.
- To compile this driver as a module, choose M here: the
- module will be called se401.
+source "drivers/media/video/pvrusb2/Kconfig"
-config USB_SN9C102
- tristate "USB SN9C10x PC Camera Controller support"
- depends on USB && VIDEO_DEV
- ---help---
- Say Y here if you want support for cameras based on SONiX SN9C101,
- SN9C102 or SN9C103 PC Camera Controllers.
+source "drivers/media/video/em28xx/Kconfig"
- See <file:Documentation/usb/sn9c102.txt> for more informations.
+source "drivers/media/video/usbvideo/Kconfig"
- To compile this driver as a module, choose M here: the
- module will be called sn9c102.
+source "drivers/media/video/et61x251/Kconfig"
-config USB_STV680
- tristate "USB STV680 (Pencam) Camera support"
- depends on USB && VIDEO_DEV
+config VIDEO_OVCAMCHIP
+ tristate "OmniVision Camera Chip support"
+ depends on I2C && VIDEO_V4L1
---help---
- Say Y here if you want to connect this type of camera to your
- computer's USB port. This includes the Pencam line of cameras.
- See <file:Documentation/usb/stv680.txt> for more information and for
- a list of supported cameras.
+ Support for the OmniVision OV6xxx and OV7xxx series of camera chips.
+ This driver is intended to be used with the ov511 and w9968cf USB
+ camera drivers.
To compile this driver as a module, choose M here: the
- module will be called stv680.
+ module will be called ovcamchip.
config USB_W9968CF
tristate "USB W996[87]CF JPEG Dual Mode Camera support"
- depends on USB && VIDEO_DEV && I2C
+ depends on USB && VIDEO_V4L1 && I2C
select VIDEO_OVCAMCHIP
---help---
Say Y here if you want support for cameras based on OV681 or
resolutions and framerates, but cannot be included in the official
Linux kernel for performance purposes.
- See <file:Documentation/usb/w9968cf.txt> for more informations.
+ See <file:Documentation/video4linux/w9968cf.txt> for more info.
To compile this driver as a module, choose M here: the
module will be called w9968cf.
-config USB_ZC0301
- tristate "USB ZC0301 Image Processor and Control Chip support"
- depends on USB && VIDEO_DEV
+config USB_OV511
+ tristate "USB OV511 Camera support"
+ depends on USB && VIDEO_V4L1
---help---
- Say Y here if you want support for cameras based on the ZC0301
- Image Processor and Control Chip.
+ Say Y here if you want to connect this type of camera to your
+ computer's USB port. See <file:Documentation/video4linux/ov511.txt>
+ for more information and for a list of supported cameras.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ov511.
- See <file:Documentation/usb/zc0301.txt> for more informations.
+config USB_SE401
+ tristate "USB SE401 Camera support"
+ depends on USB && VIDEO_V4L1
+ ---help---
+ Say Y here if you want to connect this type of camera to your
+ computer's USB port. See <file:Documentation/video4linux/se401.txt>
+ for more information and for a list of supported cameras.
To compile this driver as a module, choose M here: the
- module will be called zc0301.
+ module will be called se401.
-config USB_PWC
- tristate "USB Philips Cameras"
- depends on USB && VIDEO_DEV
+source "drivers/media/video/sn9c102/Kconfig"
+
+config USB_STV680
+ tristate "USB STV680 (Pencam) Camera support"
+ depends on USB && VIDEO_V4L1
---help---
- Say Y or M here if you want to use one of these Philips & OEM
- webcams:
- * Philips PCA645, PCA646
- * Philips PCVC675, PCVC680, PCVC690
- * Philips PCVC720/40, PCVC730, PCVC740, PCVC750
- * Askey VC010
- * Logitech QuickCam Pro 3000, 4000, 'Zoom', 'Notebook Pro'
- and 'Orbit'/'Sphere'
- * Samsung MPC-C10, MPC-C30
- * Creative Webcam 5, Pro Ex
- * SOTEC Afina Eye
- * Visionite VCS-UC300, VCS-UM100
-
- The PCA635, PCVC665 and PCVC720/20 are not supported by this driver
- and never will be, but the 665 and 720/20 are supported by other
- drivers.
-
- See <file:Documentation/usb/philips.txt> for more information and
- installation instructions.
-
- The built-in microphone is enabled by selecting USB Audio support.
+ Say Y here if you want to connect this type of camera to your
+ computer's USB port. This includes the Pencam line of cameras.
+ See <file:Documentation/video4linux/stv680.txt> for more information
+ and for a list of supported cameras.
To compile this driver as a module, choose M here: the
- module will be called pwc.
+ module will be called stv680.
+
+source "drivers/media/video/zc0301/Kconfig"
+
+source "drivers/media/video/pwc/Kconfig"
endmenu # V4L USB devices