# Multimedia Video device configuration
#
-menu "Video Capture Adapters"
+menuconfig VIDEO_CAPTURE_DRIVERS
+ bool "Video capture adapters"
depends on VIDEO_DEV
+ default y
+ ---help---
+ Say Y here to enable selecting the video adapters for
+ webcams, analog TV, and hybrid analog/digital TV.
+ Some of those devices also supports FM radio.
-comment "Video Capture Adapters"
+if VIDEO_CAPTURE_DRIVERS && VIDEO_DEV
config VIDEO_ADV_DEBUG
bool "Enable advanced debug functionality"
- depends on VIDEO_DEV
default n
---help---
Say Y here to enable advanced debugging functionality on some
#
menu "Encoders/decoders and other helper chips"
- depends on VIDEO_DEV && !VIDEO_HELPER_CHIPS_AUTO
+ depends on !VIDEO_HELPER_CHIPS_AUTO
comment "Audio decoders"
config VIDEO_TDA9840
tristate "Philips TDA9840 audio processor"
- depends on VIDEO_DEV && I2C
+ depends on I2C
---help---
Support for tda9840 audio decoder chip found on some Zoran boards.
config VIDEO_TEA6415C
tristate "Philips TEA6415C audio processor"
- depends on VIDEO_DEV && I2C
+ depends on I2C
---help---
Support for tea6415c audio decoder chip found on some bt8xx boards.
config VIDEO_TEA6420
tristate "Philips TEA6420 audio processor"
- depends on VIDEO_DEV && I2C
+ depends on I2C
---help---
Support for tea6420 audio decoder chip found on some bt8xx boards.
To compile this driver as a module, choose M here: the
module will be called wm8739.
+config VIDEO_VP27SMPX
+ tristate "Panasonic VP27s internal MPX"
+ depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
+ ---help---
+ Support for the internal MPX of the Panasonic VP27s tuner.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vp27smpx.
+
comment "Video decoders"
config VIDEO_BT819
OV7670 VGA camera. It currently only works with the M88ALP01
controller.
+config VIDEO_TCM825X
+ tristate "TCM825x camera sensor support"
+ depends on I2C && VIDEO_V4L2
+ ---help---
+ This is a driver for the Toshiba TCM825x VGA camera sensor.
+ It is used for example in Nokia N800.
+
config VIDEO_SAA7110
tristate "Philips SAA7110 video decoder"
depends on VIDEO_V4L1 && I2C
config VIDEO_VIVI
tristate "Virtual Video Driver"
- depends on VIDEO_V4L2 && !SPARC32 && !SPARC64
+ depends on VIDEO_V4L2 && !SPARC32 && !SPARC64 && PCI
select VIDEO_BUF
default n
---help---
config VIDEO_SAA5249
tristate "SAA5249 Teletext processor"
- depends on VIDEO_DEV && I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_V4L2
help
Support for I2C bus based teletext using the SAA5249 chip. At the
moment this is only useful on some European WinTV cards.
config TUNER_3036
tristate "SAB3036 tuner"
- depends on VIDEO_DEV && I2C && VIDEO_V4L1
+ depends on I2C && VIDEO_V4L1
help
Say Y here to include support for Philips SAB3036 compatible tuners.
If in doubt, say N.
config VIDEO_STRADIS
tristate "Stradis 4:2:2 MPEG-2 video driver (EXPERIMENTAL)"
- depends on EXPERIMENTAL && PCI && VIDEO_V4L1 && !PPC64
+ depends on EXPERIMENTAL && PCI && VIDEO_V4L1 && VIRT_TO_BUS
help
Say Y here to enable support for the Stradis 4:2:2 MPEG-2 video
driver for PCI. There is a product page at
config VIDEO_ZORAN
tristate "Zoran ZR36057/36067 Video For Linux"
- depends on PCI && I2C_ALGOBIT && VIDEO_V4L1 && !PPC64
+ depends on PCI && I2C_ALGOBIT && VIDEO_V4L1 && VIRT_TO_BUS
help
Say Y for support for MJPEG capture cards based on the Zoran
36057/36067 PCI controller chipset. This includes the Iomega
help
Support for the AverMedia 6 Eyes video surveillance card.
-config VIDEO_ZR36120
- tristate "Zoran ZR36120/36125 Video For Linux"
- depends on PCI && I2C && VIDEO_V4L1 && BROKEN
- help
- Support for ZR36120/ZR36125 based frame grabber/overlay boards.
- This includes the Victor II, WaveWatcher, Video Wonder, Maxi-TV,
- and Buster boards. Please read the material in
- <file:Documentation/video4linux/zr36120.txt> for more information.
-
- To compile this driver as a module, choose M here: the
- module will be called zr36120.
-
config VIDEO_MEYE
tristate "Sony Vaio Picturebook Motion Eye Video For Linux"
- depends on PCI && SONYPI && VIDEO_V4L1
+ depends on PCI && SONY_LAPTOP && VIDEO_V4L1
---help---
This is the video4linux driver for the Motion Eye camera found
in the Vaio Picturebook laptops. Please read the material in
<file:Documentation/video4linux/meye.txt> for more information.
- If you say Y or M here, you need to say Y or M to "Sony Programmable
- I/O Control Device" in the character device section.
+ If you say Y or M here, you need to say Y or M to "Sony Laptop
+ Extras" in the misc device section.
To compile this driver as a module, choose M here: the
module will be called meye.
source "drivers/media/video/cx88/Kconfig"
+source "drivers/media/video/cx23885/Kconfig"
+
+source "drivers/media/video/ivtv/Kconfig"
+
config VIDEO_M32R_AR
tristate "AR devices"
depends on M32R && VIDEO_V4L1
config VIDEO_CAFE_CCIC
tristate "Marvell 88ALP01 (Cafe) CMOS Camera Controller support"
- depends on I2C && VIDEO_V4L2
+ depends on PCI && I2C && VIDEO_V4L2
select VIDEO_OV7670
---help---
This is a video4linux2 driver for the Marvell 88ALP01 integrated
# USB Multimedia device configuration
#
-menu "V4L USB devices"
- depends on USB && VIDEO_DEV
+menuconfig V4L_USB_DRIVERS
+ bool "V4L USB devices"
+ depends on USB
+ default y
+
+if V4L_USB_DRIVERS && USB
source "drivers/media/video/pvrusb2/Kconfig"
source "drivers/media/video/em28xx/Kconfig"
+source "drivers/media/video/usbvision/Kconfig"
+
source "drivers/media/video/usbvideo/Kconfig"
source "drivers/media/video/et61x251/Kconfig"
config USB_W9968CF
tristate "USB W996[87]CF JPEG Dual Mode Camera support"
- depends on USB && VIDEO_V4L1 && I2C
+ depends on VIDEO_V4L1 && I2C
select VIDEO_OVCAMCHIP
---help---
Say Y here if you want support for cameras based on OV681 or
config USB_OV511
tristate "USB OV511 Camera support"
- depends on USB && VIDEO_V4L1
+ depends on VIDEO_V4L1
---help---
Say Y here if you want to connect this type of camera to your
computer's USB port. See <file:Documentation/video4linux/ov511.txt>
config USB_SE401
tristate "USB SE401 Camera support"
- depends on USB && VIDEO_V4L1
+ depends on VIDEO_V4L1
---help---
Say Y here if you want to connect this type of camera to your
computer's USB port. See <file:Documentation/video4linux/se401.txt>
config USB_STV680
tristate "USB STV680 (Pencam) Camera support"
- depends on USB && VIDEO_V4L1
+ depends on VIDEO_V4L1
---help---
Say Y here if you want to connect this type of camera to your
computer's USB port. This includes the Pencam line of cameras.
source "drivers/media/video/pwc/Kconfig"
-endmenu # V4L USB devices
+config USB_ZR364XX
+ tristate "USB ZR364XX Camera support"
+ depends on VIDEO_V4L2
+ ---help---
+ Say Y here if you want to connect this type of camera to your
+ computer's USB port.
+ See <file:Documentation/video4linux/zr364xx.txt> for more info
+ and list of supported cameras.
+
+ To compile this driver as a module, choose M here: the
+ module will be called zr364xx.
+
+endif # V4L_USB_DRIVERS
-endmenu
+endif # VIDEO_CAPTURE_DRIVERS
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff