# Multimedia Video device configuration
#
-menu "Video For Linux"
+menuconfig VIDEO_CAPTURE_DRIVERS
+ bool "Video capture adapters"
depends on VIDEO_DEV
+ default y
+ ---help---
+ Say Y here to enable selecting the video adapters for
+ webcams, analog TV, and hybrid analog/digital TV.
+ Some of those devices also supports FM radio.
-comment "Video Adapters"
+if VIDEO_CAPTURE_DRIVERS && VIDEO_DEV
config VIDEO_ADV_DEBUG
bool "Enable advanced debug functionality"
- depends on VIDEO_DEV
default n
---help---
Say Y here to enable advanced debugging functionality on some
V4L devices.
In doubt, say N.
-config VIDEO_BT848
- tristate "BT848 Video For Linux"
- depends on VIDEO_DEV && PCI && I2C
- select I2C_ALGOBIT
- select FW_LOADER
- select VIDEO_BTCX
- select VIDEO_BUF
- select VIDEO_IR
- select VIDEO_TUNER
- select VIDEO_TVEEPROM
- select VIDEO_MSP3400
+config VIDEO_HELPER_CHIPS_AUTO
+ bool "Autoselect pertinent encoders/decoders and other helper chips"
+ default y
+ ---help---
+ Most video cards may require additional modules to encode or
+ decode audio/video standards. This option will autoselect
+ all pertinent modules to each selected video module.
+
+ Unselect this only if you know exactly what you are doing, since
+ it may break support on some boards.
+
+ In doubt, say Y.
+
+#
+# Encoder / Decoder module configuration
+#
+
+menu "Encoders/decoders and other helper chips"
+ depends on !VIDEO_HELPER_CHIPS_AUTO
+
+comment "Audio decoders"
+
+config VIDEO_TVAUDIO
+ tristate "Simple audio decoder chips"
+ depends on VIDEO_V4L1 && I2C
+ ---help---
+ Support for several audio decoder chips found on some bt8xx boards:
+ Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300,
+ tea6320, tea6420, tda8425, ta8874z.
+ Microchip: pic16c54 based design on ProVideo PV951 board.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tvaudio.
+
+config VIDEO_TDA7432
+ tristate "Philips TDA7432 audio processor"
+ depends on VIDEO_V4L1 && I2C
+ ---help---
+ Support for tda7432 audio decoder chip found on some bt8xx boards.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tda7432.
+
+config VIDEO_TDA9840
+ tristate "Philips TDA9840 audio processor"
+ depends on I2C
+ ---help---
+ Support for tda9840 audio decoder chip found on some Zoran boards.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tda9840.
+
+config VIDEO_TDA9875
+ tristate "Philips TDA9875 audio processor"
+ depends on VIDEO_V4L1 && I2C
+ ---help---
+ Support for tda9875 audio decoder chip found on some bt8xx boards.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tda9875.
+
+config VIDEO_TEA6415C
+ tristate "Philips TEA6415C audio processor"
+ depends on I2C
+ ---help---
+ Support for tea6415c audio decoder chip found on some bt8xx boards.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tea6415c.
+
+config VIDEO_TEA6420
+ tristate "Philips TEA6420 audio processor"
+ depends on I2C
+ ---help---
+ Support for tea6420 audio decoder chip found on some bt8xx boards.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tea6420.
+
+config VIDEO_MSP3400
+ tristate "Micronas MSP34xx audio decoders"
+ depends on VIDEO_V4L2 && I2C
+ ---help---
+ Support for the Micronas MSP34xx series of audio decoders.
+
+ To compile this driver as a module, choose M here: the
+ module will be called msp3400.
+
+config VIDEO_CS53L32A
+ tristate "Cirrus Logic CS53L32A audio ADC"
+ depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
+ ---help---
+ Support for the Cirrus Logic CS53L32A low voltage
+ stereo A/D converter.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cs53l32a.
+
+config VIDEO_TLV320AIC23B
+ tristate "Texas Instruments TLV320AIC23B audio codec"
+ depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
+ ---help---
+ Support for the Texas Instruments TLV320AIC23B audio codec.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tlv320aic23b.
+
+config VIDEO_WM8775
+ tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer"
+ depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
+ ---help---
+ Support for the Wolfson Microelectronics WM8775 high
+ performance stereo A/D Converter with a 4 channel input mixer.
+
+ To compile this driver as a module, choose M here: the
+ module will be called wm8775.
+
+config VIDEO_WM8739
+ tristate "Wolfson Microelectronics WM8739 stereo audio ADC"
+ depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
+ ---help---
+ Support for the Wolfson Microelectronics WM8739
+ stereo A/D Converter.
+
+ To compile this driver as a module, choose M here: the
+ module will be called wm8739.
+
+config VIDEO_VP27SMPX
+ tristate "Panasonic VP27s internal MPX"
+ depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
+ ---help---
+ Support for the internal MPX of the Panasonic VP27s tuner.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vp27smpx.
+
+comment "Video decoders"
+
+config VIDEO_BT819
+ tristate "BT819A VideoStream decoder"
+ depends on VIDEO_V4L1 && I2C
+ ---help---
+ Support for BT819A video decoder.
+
+ To compile this driver as a module, choose M here: the
+ module will be called bt819.
+
+config VIDEO_BT856
+ tristate "BT856 VideoStream decoder"
+ depends on VIDEO_V4L1 && I2C
+ ---help---
+ Support for BT856 video decoder.
+
+ To compile this driver as a module, choose M here: the
+ module will be called bt856.
+
+config VIDEO_BT866
+ tristate "BT866 VideoStream decoder"
+ depends on VIDEO_V4L1 && I2C
+ ---help---
+ Support for BT866 video decoder.
+
+ To compile this driver as a module, choose M here: the
+ module will be called bt866.
+
+config VIDEO_KS0127
+ tristate "KS0127 video decoder"
+ depends on VIDEO_V4L1 && I2C
+ ---help---
+ Support for KS0127 video decoder.
+
+ This chip is used on AverMedia AVS6EYES Zoran-based MJPEG
+ cards.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ks0127.
+
+config VIDEO_OV7670
+ tristate "OmniVision OV7670 sensor support"
+ depends on I2C && VIDEO_V4L2
+ ---help---
+ This is a Video4Linux2 sensor-level driver for the OmniVision
+ OV7670 VGA camera. It currently only works with the M88ALP01
+ controller.
+
+config VIDEO_TCM825X
+ tristate "TCM825x camera sensor support"
+ depends on I2C && VIDEO_V4L2
+ ---help---
+ This is a driver for the Toshiba TCM825x VGA camera sensor.
+ It is used for example in Nokia N800.
+
+config VIDEO_SAA7110
+ tristate "Philips SAA7110 video decoder"
+ depends on VIDEO_V4L1 && I2C
+ ---help---
+ Support for the Philips SAA7110 video decoders.
+
+ To compile this driver as a module, choose M here: the
+ module will be called saa7110.
+
+config VIDEO_SAA7111
+ tristate "Philips SAA7111 video decoder"
+ depends on VIDEO_V4L1 && I2C
+ ---help---
+ Support for the Philips SAA711 video decoder.
+
+ To compile this driver as a module, choose M here: the
+ module will be called saa7111.
+
+config VIDEO_SAA7114
+ tristate "Philips SAA7114 video decoder"
+ depends on VIDEO_V4L1 && I2C
+ ---help---
+ Support for the Philips SAA7114 video decoder. This driver
+ is used only on Zoran driver and should be moved soon to
+ SAA711x module.
+
+ To compile this driver as a module, choose M here: the
+ module will be called saa7114.
+
+config VIDEO_SAA711X
+ tristate "Philips SAA7113/4/5 video decoders"
+ depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
+ ---help---
+ Support for the Philips SAA7113/4/5 video decoders.
+
+ To compile this driver as a module, choose M here: the
+ module will be called saa7115.
+
+config VIDEO_SAA7191
+ tristate "Philips SAA7191 video decoder"
+ depends on VIDEO_V4L1 && I2C
+ ---help---
+ Support for the Philips SAA7191 video decoder.
+
+ To compile this driver as a module, choose M here: the
+ module will be called saa7191.
+
+config VIDEO_TVP5150
+ tristate "Texas Instruments TVP5150 video decoder"
+ depends on VIDEO_V4L2 && I2C
+ ---help---
+ Support for the Texas Instruments TVP5150 video decoder.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tvp5150.
+
+config VIDEO_VPX3220
+ tristate "vpx3220a, vpx3216b & vpx3214c video decoders"
+ depends on VIDEO_V4L1 && I2C
+ ---help---
+ Support for VPX322x video decoders.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vpx3220.
+
+comment "Video and audio decoders"
+
+source "drivers/media/video/cx25840/Kconfig"
+
+comment "MPEG video encoders"
+
+config VIDEO_CX2341X
+ tristate "Conexant CX2341x MPEG encoders"
+ depends on VIDEO_V4L2 && EXPERIMENTAL
+ ---help---
+ Support for the Conexant CX23416 MPEG encoders
+ and CX23415 MPEG encoder/decoders.
+
+ This module currently supports the encoding functions only.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cx2341x.
+
+comment "Video encoders"
+
+config VIDEO_SAA7127
+ tristate "Philips SAA7127/9 digital video encoders"
+ depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
+ ---help---
+ Support for the Philips SAA7127/9 digital video encoders.
+
+ To compile this driver as a module, choose M here: the
+ module will be called saa7127.
+
+config VIDEO_SAA7185
+ tristate "Philips SAA7185 video encoder"
+ depends on VIDEO_V4L1 && I2C
+ ---help---
+ Support for the Philips SAA7185 video encoder.
+
+ To compile this driver as a module, choose M here: the
+ module will be called saa7185.
+
+config VIDEO_ADV7170
+ tristate "Analog Devices ADV7170 video encoder"
+ depends on VIDEO_V4L1 && I2C
---help---
- Support for BT848 based frame grabber/overlay boards. This includes
- the Miro, Hauppauge and STB boards. Please read the material in
- <file:Documentation/video4linux/bttv/> for more information.
+ Support for the Analog Devices ADV7170 video encoder driver
To compile this driver as a module, choose M here: the
- module will be called bttv.
+ module will be called adv7170.
-config VIDEO_BT848_DVB
- bool "DVB/ATSC Support for bt878 based TV cards"
- depends on VIDEO_BT848 && DVB_CORE
- select DVB_BT8XX
+config VIDEO_ADV7175
+ tristate "Analog Devices ADV7175 video encoder"
+ depends on VIDEO_V4L1 && I2C
---help---
- This adds support for DVB/ATSC cards based on the BT878 chip.
+ Support for the Analog Devices ADV7175 video encoder driver
+
+ To compile this driver as a module, choose M here: the
+ module will be called adv7175.
+
+comment "Video improvement chips"
+
+config VIDEO_UPD64031A
+ tristate "NEC Electronics uPD64031A Ghost Reduction"
+ depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
+ ---help---
+ Support for the NEC Electronics uPD64031A Ghost Reduction
+ video chip. It is most often found in NTSC TV cards made for
+ Japan and is used to reduce the 'ghosting' effect that can
+ be present in analog TV broadcasts.
+
+ To compile this driver as a module, choose M here: the
+ module will be called upd64031a.
+
+config VIDEO_UPD64083
+ tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation"
+ depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
+ ---help---
+ Support for the NEC Electronics uPD64083 3-Dimensional Y/C
+ separation video chip. It is used to improve the quality of
+ the colors of a composite signal.
+
+ To compile this driver as a module, choose M here: the
+ module will be called upd64083.
+
+endmenu # encoder / decoder chips
+
+config VIDEO_VIVI
+ tristate "Virtual Video Driver"
+ depends on VIDEO_V4L2 && !SPARC32 && !SPARC64 && PCI
+ select VIDEO_BUF
+ default n
+ ---help---
+ Enables a virtual video driver. This device shows a color bar
+ and a timestamp, as a real device would generate by using V4L2
+ api.
+ Say Y here if you want to test video apps or debug V4L devices.
+ In doubt, say N.
+
+source "drivers/media/video/bt8xx/Kconfig"
config VIDEO_SAA6588
tristate "SAA6588 Radio Chip RDS decoder support on BT848 cards"
- depends on VIDEO_DEV && I2C && VIDEO_BT848
+ depends on I2C && VIDEO_BT848
help
Support for Radio Data System (RDS) decoder. This allows seeing
radio station identification transmitted using this standard.
- Currentlly, it works only with bt8x8 chips.
+ Currently, it works only with bt8x8 chips.
To compile this driver as a module, choose M here: the
module will be called saa6588.
config VIDEO_PMS
tristate "Mediavision Pro Movie Studio Video For Linux"
- depends on VIDEO_DEV && ISA
+ depends on ISA && VIDEO_V4L1
help
Say Y if you have such a thing.
config VIDEO_PLANB
tristate "PlanB Video-In on PowerMac"
- depends on PPC_PMAC && VIDEO_DEV && BROKEN
+ depends on PPC_PMAC && VIDEO_V4L1 && BROKEN
help
PlanB is the V4L driver for the PowerMac 7x00/8x00 series video
input hardware. If you want to experiment with this, say Y.
config VIDEO_BWQCAM
tristate "Quickcam BW Video For Linux"
- depends on VIDEO_DEV && PARPORT
+ depends on PARPORT && VIDEO_V4L1
help
Say Y have if you the black and white version of the QuickCam
camera. See the next option for the color version.
config VIDEO_CQCAM
tristate "QuickCam Colour Video For Linux (EXPERIMENTAL)"
- depends on EXPERIMENTAL && VIDEO_DEV && PARPORT
+ depends on EXPERIMENTAL && PARPORT && VIDEO_V4L1
help
This is the video4linux driver for the colour version of the
Connectix QuickCam. If you have one of these cameras, say Y here,
config VIDEO_W9966
tristate "W9966CF Webcam (FlyCam Supra and others) Video For Linux"
- depends on PARPORT_1284 && VIDEO_DEV && PARPORT
+ depends on PARPORT_1284 && PARPORT && VIDEO_V4L1
help
Video4linux driver for Winbond's w9966 based Webcams.
Currently tested with the LifeView FlyCam Supra.
config VIDEO_CPIA
tristate "CPiA Video For Linux"
- depends on VIDEO_DEV
+ depends on VIDEO_V4L1
---help---
This is the video4linux driver for cameras based on Vision's CPiA
(Colour Processor Interface ASIC), such as the Creative Labs Video
config VIDEO_SAA5246A
tristate "SAA5246A, SAA5281 Teletext processor"
- depends on VIDEO_DEV && I2C
+ depends on I2C && VIDEO_V4L2
help
Support for I2C bus based teletext using the SAA5246A or SAA5281
chip. Useful only if you live in Europe.
config VIDEO_SAA5249
tristate "SAA5249 Teletext processor"
- depends on VIDEO_DEV && I2C
+ depends on I2C && VIDEO_V4L2
help
Support for I2C bus based teletext using the SAA5249 chip. At the
moment this is only useful on some European WinTV cards.
config TUNER_3036
tristate "SAB3036 tuner"
- depends on VIDEO_DEV && I2C
+ depends on I2C && VIDEO_V4L1
help
Say Y here to include support for Philips SAB3036 compatible tuners.
If in doubt, say N.
config VIDEO_VINO
tristate "SGI Vino Video For Linux (EXPERIMENTAL)"
- depends on VIDEO_DEV && I2C && SGI_IP22 && EXPERIMENTAL
+ depends on I2C && SGI_IP22 && EXPERIMENTAL && VIDEO_V4L2
select I2C_ALGO_SGI
+ select VIDEO_SAA7191 if VIDEO_HELPER_CHIPS_AUTO
help
Say Y here to build in support for the Vino video input system found
on SGI Indy machines.
config VIDEO_STRADIS
tristate "Stradis 4:2:2 MPEG-2 video driver (EXPERIMENTAL)"
- depends on EXPERIMENTAL && VIDEO_DEV && PCI
+ depends on EXPERIMENTAL && PCI && VIDEO_V4L1 && VIRT_TO_BUS
help
Say Y here to enable support for the Stradis 4:2:2 MPEG-2 video
driver for PCI. There is a product page at
<http://www.stradis.com/>.
+config VIDEO_ZORAN_ZR36060
+ tristate
+
config VIDEO_ZORAN
tristate "Zoran ZR36057/36067 Video For Linux"
- depends on VIDEO_DEV && PCI && I2C_ALGOBIT
+ depends on PCI && I2C_ALGOBIT && VIDEO_V4L1 && VIRT_TO_BUS
help
Say Y for support for MJPEG capture cards based on the Zoran
36057/36067 PCI controller chipset. This includes the Iomega
config VIDEO_ZORAN_BUZ
tristate "Iomega Buz support"
depends on VIDEO_ZORAN
+ select VIDEO_SAA7111 if VIDEO_HELPER_CHIPS_AUTO
+ select VIDEO_SAA7185 if VIDEO_HELPER_CHIPS_AUTO
+ select VIDEO_ZORAN_ZR36060
help
Support for the Iomega Buz MJPEG capture/playback card.
config VIDEO_ZORAN_DC10
tristate "Pinnacle/Miro DC10(+) support"
depends on VIDEO_ZORAN
+ select VIDEO_SAA7110
+ select VIDEO_ADV7175 if VIDEO_HELPER_CHIPS_AUTO
+ select VIDEO_ZORAN_ZR36060
help
Support for the Pinnacle/Miro DC10(+) MJPEG capture/playback
card.
config VIDEO_ZORAN_DC30
tristate "Pinnacle/Miro DC30(+) support"
depends on VIDEO_ZORAN
+ select VIDEO_ADV7175 if VIDEO_HELPER_CHIPS_AUTO
+ select VIDEO_VPX3220 if VIDEO_HELPER_CHIPS_AUTO
help
Support for the Pinnacle/Miro DC30(+) MJPEG capture/playback
card. This also supports really old DC10 cards based on the
config VIDEO_ZORAN_LML33
tristate "Linux Media Labs LML33 support"
depends on VIDEO_ZORAN
+ select VIDEO_BT819 if VIDEO_HELPER_CHIPS_AUTO
+ select VIDEO_BT856 if VIDEO_HELPER_CHIPS_AUTO
+ select VIDEO_ZORAN_ZR36060
help
Support for the Linux Media Labs LML33 MJPEG capture/playback
card.
config VIDEO_ZORAN_LML33R10
tristate "Linux Media Labs LML33R10 support"
depends on VIDEO_ZORAN
+ select VIDEO_SAA7114 if VIDEO_HELPER_CHIPS_AUTO
+ select VIDEO_ADV7170 if VIDEO_HELPER_CHIPS_AUTO
+ select VIDEO_ZORAN_ZR36060
help
support for the Linux Media Labs LML33R10 MJPEG capture/playback
card.
-config VIDEO_ZR36120
- tristate "Zoran ZR36120/36125 Video For Linux"
- depends on VIDEO_DEV && PCI && I2C && BROKEN
+config VIDEO_ZORAN_AVS6EYES
+ tristate "AverMedia 6 Eyes support (EXPERIMENTAL)"
+ depends on VIDEO_ZORAN && EXPERIMENTAL && VIDEO_V4L1
+ select VIDEO_BT856 if VIDEO_HELPER_CHIPS_AUTO
+ select VIDEO_KS0127 if VIDEO_HELPER_CHIPS_AUTO
+ select VIDEO_ZORAN_ZR36060
help
- Support for ZR36120/ZR36125 based frame grabber/overlay boards.
- This includes the Victor II, WaveWatcher, Video Wonder, Maxi-TV,
- and Buster boards. Please read the material in
- <file:Documentation/video4linux/zr36120.txt> for more information.
-
- To compile this driver as a module, choose M here: the
- module will be called zr36120.
+ Support for the AverMedia 6 Eyes video surveillance card.
config VIDEO_MEYE
tristate "Sony Vaio Picturebook Motion Eye Video For Linux"
- depends on VIDEO_DEV && PCI && SONYPI
+ depends on PCI && SONY_LAPTOP && VIDEO_V4L1
---help---
This is the video4linux driver for the Motion Eye camera found
in the Vaio Picturebook laptops. Please read the material in
<file:Documentation/video4linux/meye.txt> for more information.
- If you say Y or M here, you need to say Y or M to "Sony Programmable
- I/O Control Device" in the character device section.
+ If you say Y or M here, you need to say Y or M to "Sony Laptop
+ Extras" in the misc device section.
To compile this driver as a module, choose M here: the
module will be called meye.
config VIDEO_MXB
tristate "Siemens-Nixdorf 'Multimedia eXtension Board'"
- depends on VIDEO_DEV && PCI
+ depends on PCI && VIDEO_V4L1 && I2C
select VIDEO_SAA7146_VV
select VIDEO_TUNER
+ select VIDEO_SAA7111 if VIDEO_HELPER_CHIPS_AUTO
+ select VIDEO_TDA9840 if VIDEO_HELPER_CHIPS_AUTO
+ select VIDEO_TEA6415C if VIDEO_HELPER_CHIPS_AUTO
+ select VIDEO_TEA6420 if VIDEO_HELPER_CHIPS_AUTO
---help---
This is a video4linux driver for the 'Multimedia eXtension Board'
TV card by Siemens-Nixdorf.
config VIDEO_DPC
tristate "Philips-Semiconductors 'dpc7146 demonstration board'"
- depends on VIDEO_DEV && PCI
+ depends on PCI && VIDEO_V4L1 && I2C
select VIDEO_SAA7146_VV
+ select VIDEO_SAA7111 if VIDEO_HELPER_CHIPS_AUTO
---help---
This is a video4linux driver for the 'dpc7146 demonstration
board' by Philips-Semiconductors. It's the reference design
config VIDEO_HEXIUM_ORION
tristate "Hexium HV-PCI6 and Orion frame grabber"
- depends on VIDEO_DEV && PCI
+ depends on PCI && VIDEO_V4L2 && I2C
select VIDEO_SAA7146_VV
---help---
This is a video4linux driver for the Hexium HV-PCI6 and
config VIDEO_HEXIUM_GEMINI
tristate "Hexium Gemini frame grabber"
- depends on VIDEO_DEV && PCI
+ depends on PCI && VIDEO_V4L2 && I2C
select VIDEO_SAA7146_VV
---help---
This is a video4linux driver for the Hexium Gemini frame
source "drivers/media/video/cx88/Kconfig"
-source "drivers/media/video/em28xx/Kconfig"
-
-config VIDEO_OVCAMCHIP
- tristate "OmniVision Camera Chip support"
- depends on VIDEO_DEV && I2C
- ---help---
- Support for the OmniVision OV6xxx and OV7xxx series of camera chips.
- This driver is intended to be used with the ov511 and w9968cf USB
- camera drivers.
+source "drivers/media/video/cx23885/Kconfig"
- To compile this driver as a module, choose M here: the
- module will be called ovcamchip
+source "drivers/media/video/ivtv/Kconfig"
config VIDEO_M32R_AR
tristate "AR devices"
- depends on M32R
+ depends on M32R && VIDEO_V4L1
---help---
This is a video4linux driver for the Renesas AR (Artificial Retina)
camera module.
config VIDEO_M32R_AR_M64278
- tristate "Use Colour AR module M64278(VGA)"
- depends on VIDEO_M32R_AR && PLAT_M32700UT
+ tristate "AR device with color module M64278(VGA)"
+ depends on PLAT_M32700UT
+ select VIDEO_M32R_AR
---help---
- Say Y here to use the Renesas M64278E-800 camera module,
- which supports VGA(640x480 pixcels) size of images.
+ This is a video4linux driver for the Renesas AR (Artificial
+ Retina) with M64278E-800 camera module.
+ This module supports VGA(640x480 pixels) resolutions.
+
+ To compile this driver as a module, choose M here: the
+ module will be called arv.
-config VIDEO_AUDIO_DECODER
- tristate "Add support for additional audio chipsets"
- depends on VIDEO_DEV && I2C && EXPERIMENTAL
- select VIDEO_MSP3400
- select VIDEO_CS53L32A
- select VIDEO_WM8775
+config VIDEO_CAFE_CCIC
+ tristate "Marvell 88ALP01 (Cafe) CMOS Camera Controller support"
+ depends on PCI && I2C && VIDEO_V4L2
+ select VIDEO_OV7670
---help---
- Say Y here to compile drivers for WM8775, CS53L32A and
- MSP34xx audio decoders.
+ This is a video4linux2 driver for the Marvell 88ALP01 integrated
+ CMOS camera controller. This is the controller found on first-
+ generation OLPC systems.
-config VIDEO_MSP3400
- tristate "Micronas MSP34xx audio decoders"
- depends on VIDEO_DEV && I2C
+#
+# USB Multimedia device configuration
+#
+
+menuconfig V4L_USB_DRIVERS
+ bool "V4L USB devices"
+ depends on USB
+ default y
+
+if V4L_USB_DRIVERS && USB
+
+source "drivers/media/video/pvrusb2/Kconfig"
+
+source "drivers/media/video/em28xx/Kconfig"
+
+source "drivers/media/video/usbvision/Kconfig"
+
+source "drivers/media/video/usbvideo/Kconfig"
+
+source "drivers/media/video/et61x251/Kconfig"
+
+config VIDEO_OVCAMCHIP
+ tristate "OmniVision Camera Chip support"
+ depends on I2C && VIDEO_V4L1
---help---
- Support for the Micronas MSP34xx series of audio decoders.
+ Support for the OmniVision OV6xxx and OV7xxx series of camera chips.
+ This driver is intended to be used with the ov511 and w9968cf USB
+ camera drivers.
To compile this driver as a module, choose M here: the
- module will be called msp3400
+ module will be called ovcamchip.
-config VIDEO_CS53L32A
- tristate "Cirrus Logic CS53L32A audio ADC"
- depends on VIDEO_DEV && I2C && EXPERIMENTAL
+config USB_W9968CF
+ tristate "USB W996[87]CF JPEG Dual Mode Camera support"
+ depends on VIDEO_V4L1 && I2C
+ select VIDEO_OVCAMCHIP
---help---
- Support for the Cirrus Logic CS53L32A low voltage
- stereo A/D converter.
+ Say Y here if you want support for cameras based on OV681 or
+ Winbond W9967CF/W9968CF JPEG USB Dual Mode Camera Chips.
+
+ This driver has an optional plugin, which is distributed as a
+ separate module only (released under GPL). It allows to use higher
+ resolutions and framerates, but cannot be included in the official
+ Linux kernel for performance purposes.
+
+ See <file:Documentation/video4linux/w9968cf.txt> for more info.
To compile this driver as a module, choose M here: the
- module will be called cs53l32a
+ module will be called w9968cf.
-config VIDEO_WM8775
- tristate "Wolfson Microelectronics WM8775 audio ADC"
- depends on VIDEO_DEV && I2C && EXPERIMENTAL
+config USB_OV511
+ tristate "USB OV511 Camera support"
+ depends on VIDEO_V4L1
---help---
- Support for the Wolfson Microelectronics WM8775
- high performance stereo A/D Converter.
+ Say Y here if you want to connect this type of camera to your
+ computer's USB port. See <file:Documentation/video4linux/ov511.txt>
+ for more information and for a list of supported cameras.
To compile this driver as a module, choose M here: the
- module will be called wm8775
+ module will be called ov511.
-source "drivers/media/video/cx25840/Kconfig"
+config USB_SE401
+ tristate "USB SE401 Camera support"
+ depends on VIDEO_V4L1
+ ---help---
+ Say Y here if you want to connect this type of camera to your
+ computer's USB port. See <file:Documentation/video4linux/se401.txt>
+ for more information and for a list of supported cameras.
-config VIDEO_SAA711X
- tristate "Philips SAA7113/4/5 video decoders"
- depends on VIDEO_DEV && I2C && EXPERIMENTAL
+ To compile this driver as a module, choose M here: the
+ module will be called se401.
+
+source "drivers/media/video/sn9c102/Kconfig"
+
+config USB_STV680
+ tristate "USB STV680 (Pencam) Camera support"
+ depends on VIDEO_V4L1
---help---
- Support for the Philips SAA7113/4/5 video decoders.
+ Say Y here if you want to connect this type of camera to your
+ computer's USB port. This includes the Pencam line of cameras.
+ See <file:Documentation/video4linux/stv680.txt> for more information
+ and for a list of supported cameras.
To compile this driver as a module, choose M here: the
- module will be called saa7115
+ module will be called stv680.
-config VIDEO_SAA7127
- tristate "Philips SAA7127/9 digital video encoders"
- depends on VIDEO_DEV && I2C && EXPERIMENTAL
+source "drivers/media/video/zc0301/Kconfig"
+
+source "drivers/media/video/pwc/Kconfig"
+
+config USB_ZR364XX
+ tristate "USB ZR364XX Camera support"
+ depends on VIDEO_V4L2
---help---
- Support for the Philips SAA7127/9 digital video encoders.
+ Say Y here if you want to connect this type of camera to your
+ computer's USB port.
+ See <file:Documentation/video4linux/zr364xx.txt> for more info
+ and list of supported cameras.
To compile this driver as a module, choose M here: the
- module will be called saa7127
+ module will be called zr364xx.
+
+endif # V4L_USB_DRIVERS
-endmenu
+endif # VIDEO_CAPTURE_DRIVERS
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff