* RadioTrack II driver for Linux radio support (C) 1998 Ben Pfaff
*
* Based on RadioTrack I/RadioReveal (C) 1997 M. Kirkwood
- * Converted to new API by Alan Cox <Alan.Cox@linux.org>
+ * Converted to new API by Alan Cox <alan@lxorguk.ukuu.org.uk>
* Various bugfixes and enhancements by Russell Kroll <rkroll@exploits.org>
*
* TODO: Allow for more than one of these foolish entities :-)
#include <asm/io.h> /* outb, outb_p */
#include <asm/uaccess.h> /* copy to/from user */
#include <linux/videodev2.h> /* kernel radio structs */
+#include <media/v4l2-ioctl.h>
#include <media/v4l2-common.h>
#include <linux/spinlock.h>
-#include <linux/version.h> /* for KERNEL_VERSION MACRO */
-#define RADIO_VERSION KERNEL_VERSION(0,0,2)
+#include <linux/version.h> /* for KERNEL_VERSION MACRO */
+#define RADIO_VERSION KERNEL_VERSION(0,0,3)
+#define RADIO_BANNER "GemTek Radio card driver: v0.0.3"
-static struct v4l2_queryctrl radio_qctrl[] = {
- {
- .id = V4L2_CID_AUDIO_MUTE,
- .name = "Mute",
- .minimum = 0,
- .maximum = 1,
- .default_value = 1,
- .type = V4L2_CTRL_TYPE_BOOLEAN,
- },{
- .id = V4L2_CID_AUDIO_VOLUME,
- .name = "Volume",
- .minimum = 0,
- .maximum = 65535,
- .step = 65535,
- .default_value = 0xff,
- .type = V4L2_CTRL_TYPE_INTEGER,
- }
-};
+/*
+ * Module info.
+ */
+
+MODULE_AUTHOR("Jonas Munsin, Pekka Seppänen <pexu@kapsi.fi>");
+MODULE_DESCRIPTION("A driver for the GemTek Radio card.");
+MODULE_LICENSE("GPL");
+
+/*
+ * Module params.
+ */
#ifndef CONFIG_RADIO_GEMTEK_PORT
#define CONFIG_RADIO_GEMTEK_PORT -1
#endif
+#ifndef CONFIG_RADIO_GEMTEK_PROBE
+#define CONFIG_RADIO_GEMTEK_PROBE 1
+#endif
-static int io = CONFIG_RADIO_GEMTEK_PORT;
-static int radio_nr = -1;
-static spinlock_t lock;
+static int io = CONFIG_RADIO_GEMTEK_PORT;
+static int probe = CONFIG_RADIO_GEMTEK_PROBE;
+static int hardmute;
+static int shutdown = 1;
+static int keepmuted = 1;
+static int initmute = 1;
+static int radio_nr = -1;
+static unsigned long in_use;
-struct gemtek_device
-{
- int port;
- unsigned long curfreq;
+module_param(io, int, 0444);
+MODULE_PARM_DESC(io, "Force I/O port for the GemTek Radio card if automatic "
+ "probing is disabled or fails. The most common I/O ports are: 0x20c "
+ "0x30c, 0x24c or 0x34c (0x20c, 0x248 and 0x28c have been reported to "
+ "work for the combined sound/radiocard).");
+
+module_param(probe, bool, 0444);
+MODULE_PARM_DESC(probe, "Enable automatic device probing. Note: only the most "
+ "common I/O ports used by the card are probed.");
+
+module_param(hardmute, bool, 0644);
+MODULE_PARM_DESC(hardmute, "Enable `hard muting' by shutting down PLL, may "
+ "reduce static noise.");
+
+module_param(shutdown, bool, 0644);
+MODULE_PARM_DESC(shutdown, "Enable shutting down PLL and muting line when "
+ "module is unloaded.");
+
+module_param(keepmuted, bool, 0644);
+MODULE_PARM_DESC(keepmuted, "Keep card muted even when frequency is changed.");
+
+module_param(initmute, bool, 0444);
+MODULE_PARM_DESC(initmute, "Mute card when module is loaded.");
+
+module_param(radio_nr, int, 0444);
+
+/*
+ * Functions for controlling the card.
+ */
+#define GEMTEK_LOWFREQ (87*16000)
+#define GEMTEK_HIGHFREQ (108*16000)
+
+/*
+ * Frequency calculation constants. Intermediate frequency 10.52 MHz (nominal
+ * value 10.7 MHz), reference divisor 6.39 kHz (nominal 6.25 kHz).
+ */
+#define FSCALE 8
+#define IF_OFFSET ((unsigned int)(10.52 * 16000 * (1<<FSCALE)))
+#define REF_FREQ ((unsigned int)(6.39 * 16 * (1<<FSCALE)))
+
+#define GEMTEK_CK 0x01 /* Clock signal */
+#define GEMTEK_DA 0x02 /* Serial data */
+#define GEMTEK_CE 0x04 /* Chip enable */
+#define GEMTEK_NS 0x08 /* No signal */
+#define GEMTEK_MT 0x10 /* Line mute */
+#define GEMTEK_STDF_3_125_KHZ 0x01 /* Standard frequency 3.125 kHz */
+#define GEMTEK_PLL_OFF 0x07 /* PLL off */
+
+#define BU2614_BUS_SIZE 32 /* BU2614 / BU2614FS bus size */
+
+#define SHORT_DELAY 5 /* usec */
+#define LONG_DELAY 75 /* usec */
+
+struct gemtek_device {
+ unsigned long lastfreq;
int muted;
+ u32 bu2614data;
};
+#define BU2614_FREQ_BITS 16 /* D0..D15, Frequency data */
+#define BU2614_PORT_BITS 3 /* P0..P2, Output port control data */
+#define BU2614_VOID_BITS 4 /* unused */
+#define BU2614_FMES_BITS 1 /* CT, Frequency measurement beginning data */
+#define BU2614_STDF_BITS 3 /* R0..R2, Standard frequency data */
+#define BU2614_SWIN_BITS 1 /* S, Switch between FMIN / AMIN */
+#define BU2614_SWAL_BITS 1 /* PS, Swallow counter division (AMIN only)*/
+#define BU2614_VOID2_BITS 1 /* unused */
+#define BU2614_FMUN_BITS 1 /* GT, Frequency measurement time & unlock */
+#define BU2614_TEST_BITS 1 /* TS, Test data is input */
+
+#define BU2614_FREQ_SHIFT 0
+#define BU2614_PORT_SHIFT (BU2614_FREQ_BITS + BU2614_FREQ_SHIFT)
+#define BU2614_VOID_SHIFT (BU2614_PORT_BITS + BU2614_PORT_SHIFT)
+#define BU2614_FMES_SHIFT (BU2614_VOID_BITS + BU2614_VOID_SHIFT)
+#define BU2614_STDF_SHIFT (BU2614_FMES_BITS + BU2614_FMES_SHIFT)
+#define BU2614_SWIN_SHIFT (BU2614_STDF_BITS + BU2614_STDF_SHIFT)
+#define BU2614_SWAL_SHIFT (BU2614_SWIN_BITS + BU2614_SWIN_SHIFT)
+#define BU2614_VOID2_SHIFT (BU2614_SWAL_BITS + BU2614_SWAL_SHIFT)
+#define BU2614_FMUN_SHIFT (BU2614_VOID2_BITS + BU2614_VOID2_SHIFT)
+#define BU2614_TEST_SHIFT (BU2614_FMUN_BITS + BU2614_FMUN_SHIFT)
+
+#define MKMASK(field) (((1<<BU2614_##field##_BITS) - 1) << \
+ BU2614_##field##_SHIFT)
+#define BU2614_PORT_MASK MKMASK(PORT)
+#define BU2614_FREQ_MASK MKMASK(FREQ)
+#define BU2614_VOID_MASK MKMASK(VOID)
+#define BU2614_FMES_MASK MKMASK(FMES)
+#define BU2614_STDF_MASK MKMASK(STDF)
+#define BU2614_SWIN_MASK MKMASK(SWIN)
+#define BU2614_SWAL_MASK MKMASK(SWAL)
+#define BU2614_VOID2_MASK MKMASK(VOID2)
+#define BU2614_FMUN_MASK MKMASK(FMUN)
+#define BU2614_TEST_MASK MKMASK(TEST)
+
+static struct gemtek_device gemtek_unit;
-/* local things */
+static spinlock_t lock;
-/* the correct way to mute the gemtek may be to write the last written
- * frequency || 0x10, but just writing 0x10 once seems to do it as well
+/*
+ * Set data which will be sent to BU2614FS.
*/
-static void gemtek_mute(struct gemtek_device *dev)
+#define gemtek_bu2614_set(dev, field, data) ((dev)->bu2614data = \
+ ((dev)->bu2614data & ~field##_MASK) | ((data) << field##_SHIFT))
+
+/*
+ * Transmit settings to BU2614FS over GemTek IC.
+ */
+static void gemtek_bu2614_transmit(struct gemtek_device *dev)
{
- if(dev->muted)
- return;
+ int i, bit, q, mute;
+
spin_lock(&lock);
- outb(0x10, io);
+
+ mute = dev->muted ? GEMTEK_MT : 0x00;
+
+ outb_p(mute | GEMTEK_DA | GEMTEK_CK, io);
+ udelay(SHORT_DELAY);
+ outb_p(mute | GEMTEK_CE | GEMTEK_DA | GEMTEK_CK, io);
+ udelay(LONG_DELAY);
+
+ for (i = 0, q = dev->bu2614data; i < 32; i++, q >>= 1) {
+ bit = (q & 1) ? GEMTEK_DA : 0;
+ outb_p(mute | GEMTEK_CE | bit, io);
+ udelay(SHORT_DELAY);
+ outb_p(mute | GEMTEK_CE | bit | GEMTEK_CK, io);
+ udelay(SHORT_DELAY);
+ }
+
+ outb_p(mute | GEMTEK_DA | GEMTEK_CK, io);
+ udelay(SHORT_DELAY);
+ outb_p(mute | GEMTEK_CE | GEMTEK_DA | GEMTEK_CK, io);
+ udelay(LONG_DELAY);
+
spin_unlock(&lock);
- dev->muted = 1;
}
-static void gemtek_unmute(struct gemtek_device *dev)
+/*
+ * Calculate divisor from FM-frequency for BU2614FS (3.125 KHz STDF expected).
+ */
+static unsigned long gemtek_convfreq(unsigned long freq)
{
- if(dev->muted == 0)
+ return ((freq<<FSCALE) + IF_OFFSET + REF_FREQ/2) / REF_FREQ;
+}
+
+/*
+ * Set FM-frequency.
+ */
+static void gemtek_setfreq(struct gemtek_device *dev, unsigned long freq)
+{
+
+ if (keepmuted && hardmute && dev->muted)
return;
- spin_lock(&lock);
- outb(0x20, io);
- spin_unlock(&lock);
+
+ if (freq < GEMTEK_LOWFREQ)
+ freq = GEMTEK_LOWFREQ;
+ else if (freq > GEMTEK_HIGHFREQ)
+ freq = GEMTEK_HIGHFREQ;
+
+ dev->lastfreq = freq;
dev->muted = 0;
+
+ gemtek_bu2614_set(dev, BU2614_PORT, 0);
+ gemtek_bu2614_set(dev, BU2614_FMES, 0);
+ gemtek_bu2614_set(dev, BU2614_SWIN, 0); /* FM-mode */
+ gemtek_bu2614_set(dev, BU2614_SWAL, 0);
+ gemtek_bu2614_set(dev, BU2614_FMUN, 1); /* GT bit set */
+ gemtek_bu2614_set(dev, BU2614_TEST, 0);
+
+ gemtek_bu2614_set(dev, BU2614_STDF, GEMTEK_STDF_3_125_KHZ);
+ gemtek_bu2614_set(dev, BU2614_FREQ, gemtek_convfreq(freq));
+
+ gemtek_bu2614_transmit(dev);
}
-static void zero(void)
+/*
+ * Set mute flag.
+ */
+static void gemtek_mute(struct gemtek_device *dev)
{
- outb_p(0x04, io);
- udelay(5);
- outb_p(0x05, io);
- udelay(5);
+ int i;
+ dev->muted = 1;
+
+ if (hardmute) {
+ /* Turn off PLL, disable data output */
+ gemtek_bu2614_set(dev, BU2614_PORT, 0);
+ gemtek_bu2614_set(dev, BU2614_FMES, 0); /* CT bit off */
+ gemtek_bu2614_set(dev, BU2614_SWIN, 0); /* FM-mode */
+ gemtek_bu2614_set(dev, BU2614_SWAL, 0);
+ gemtek_bu2614_set(dev, BU2614_FMUN, 0); /* GT bit off */
+ gemtek_bu2614_set(dev, BU2614_TEST, 0);
+ gemtek_bu2614_set(dev, BU2614_STDF, GEMTEK_PLL_OFF);
+ gemtek_bu2614_set(dev, BU2614_FREQ, 0);
+ gemtek_bu2614_transmit(dev);
+ } else {
+ spin_lock(&lock);
+
+ /* Read bus contents (CE, CK and DA). */
+ i = inb_p(io);
+ /* Write it back with mute flag set. */
+ outb_p((i >> 5) | GEMTEK_MT, io);
+ udelay(SHORT_DELAY);
+
+ spin_unlock(&lock);
+ }
}
-static void one(void)
+/*
+ * Unset mute flag.
+ */
+static void gemtek_unmute(struct gemtek_device *dev)
{
- outb_p(0x06, io);
- udelay(5);
- outb_p(0x07, io);
- udelay(5);
+ int i;
+ dev->muted = 0;
+
+ if (hardmute) {
+ /* Turn PLL back on. */
+ gemtek_setfreq(dev, dev->lastfreq);
+ } else {
+ spin_lock(&lock);
+
+ i = inb_p(io);
+ outb_p(i >> 5, io);
+ udelay(SHORT_DELAY);
+
+ spin_unlock(&lock);
+ }
}
-static int gemtek_setfreq(struct gemtek_device *dev, unsigned long freq)
+/*
+ * Get signal strength (= stereo status).
+ */
+static inline int gemtek_getsigstr(void)
{
- int i;
+ return inb_p(io) & GEMTEK_NS ? 0 : 1;
+}
-/* freq = 78.25*((float)freq/16000.0 + 10.52); */
+/*
+ * Check if requested card acts like GemTek Radio card.
+ */
+static int gemtek_verify(int port)
+{
+ static int verified = -1;
+ int i, q;
- freq /= 16;
- freq += 10520;
- freq *= 7825;
- freq /= 100000;
+ if (verified == port)
+ return 1;
spin_lock(&lock);
- /* 2 start bits */
- outb_p(0x03, io);
- udelay(5);
- outb_p(0x07, io);
- udelay(5);
+ q = inb_p(port); /* Read bus contents before probing. */
+ /* Try to turn on CE, CK and DA respectively and check if card responds
+ properly. */
+ for (i = 0; i < 3; ++i) {
+ outb_p(1 << i, port);
+ udelay(SHORT_DELAY);
- /* 28 frequency bits (lsb first) */
- for (i = 0; i < 14; i++)
- if (freq & (1 << i))
- one();
- else
- zero();
- /* 36 unknown bits */
- for (i = 0; i < 11; i++)
- zero();
- one();
- for (i = 0; i < 4; i++)
- zero();
- one();
- zero();
-
- /* 2 end bits */
- outb_p(0x03, io);
- udelay(5);
- outb_p(0x07, io);
- udelay(5);
+ if ((inb_p(port) & (~GEMTEK_NS)) != (0x17 | (1 << (i + 5)))) {
+ spin_unlock(&lock);
+ return 0;
+ }
+ }
+ outb_p(q >> 5, port); /* Write bus contents back. */
+ udelay(SHORT_DELAY);
spin_unlock(&lock);
+ verified = port;
- return 0;
+ return 1;
}
-static int gemtek_getsigstr(struct gemtek_device *dev)
+/*
+ * Automatic probing for card.
+ */
+static int gemtek_probe(void)
{
- spin_lock(&lock);
- inb(io);
- udelay(5);
- spin_unlock(&lock);
- if (inb(io) & 8) /* bit set = no signal present */
- return 0;
- return 1; /* signal present */
-}
+ int ioports[] = { 0x20c, 0x30c, 0x24c, 0x34c, 0x248, 0x28c };
+ int i;
-static int gemtek_do_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, void *arg)
-{
- struct video_device *dev = video_devdata(file);
- struct gemtek_device *rt=dev->priv;
+ if (!probe) {
+ printk(KERN_INFO "Automatic device probing disabled.\n");
+ return -1;
+ }
- switch(cmd)
- {
- case VIDIOC_QUERYCAP:
- {
- struct v4l2_capability *v = arg;
- memset(v,0,sizeof(*v));
- strlcpy(v->driver, "radio-gemtek", sizeof (v->driver));
- strlcpy(v->card, "GemTek", sizeof (v->card));
- sprintf(v->bus_info,"ISA");
- v->version = RADIO_VERSION;
- v->capabilities = V4L2_CAP_TUNER;
+ printk(KERN_INFO "Automatic device probing enabled.\n");
- return 0;
- }
- case VIDIOC_G_TUNER:
- {
- struct v4l2_tuner *v = arg;
+ for (i = 0; i < ARRAY_SIZE(ioports); ++i) {
+ printk(KERN_INFO "Trying I/O port 0x%x...\n", ioports[i]);
- if (v->index > 0)
- return -EINVAL;
+ if (!request_region(ioports[i], 1, "gemtek-probe")) {
+ printk(KERN_WARNING "I/O port 0x%x busy!\n",
+ ioports[i]);
+ continue;
+ }
- memset(v,0,sizeof(*v));
- strcpy(v->name, "FM");
- v->type = V4L2_TUNER_RADIO;
+ if (gemtek_verify(ioports[i])) {
+ printk(KERN_INFO "Card found from I/O port "
+ "0x%x!\n", ioports[i]);
- v->rangelow=(87*16000);
- v->rangehigh=(108*16000);
- v->rxsubchans =V4L2_TUNER_SUB_MONO;
- v->capability=V4L2_TUNER_CAP_LOW;
- v->audmode = V4L2_TUNER_MODE_MONO;
- v->signal=0xFFFF*gemtek_getsigstr(rt);
+ release_region(ioports[i], 1);
- return 0;
+ io = ioports[i];
+ return io;
}
- case VIDIOC_S_TUNER:
- {
- struct v4l2_tuner *v = arg;
- if (v->index > 0)
- return -EINVAL;
+ release_region(ioports[i], 1);
+ }
- return 0;
- }
- case VIDIOC_S_FREQUENCY:
- {
- struct v4l2_frequency *f = arg;
-
- rt->curfreq = f->frequency;
- /* needs to be called twice in order for getsigstr to work */
- gemtek_setfreq(rt, rt->curfreq);
- gemtek_setfreq(rt, rt->curfreq);
- return 0;
- }
- case VIDIOC_G_FREQUENCY:
- {
- struct v4l2_frequency *f = arg;
+ printk(KERN_ERR "Automatic probing failed!\n");
- f->type = V4L2_TUNER_RADIO;
- f->frequency = rt->curfreq;
+ return -1;
+}
- return 0;
- }
- case VIDIOC_QUERYCTRL:
- {
- struct v4l2_queryctrl *qc = arg;
- int i;
-
- for (i = 0; i < ARRAY_SIZE(radio_qctrl); i++) {
- if (qc->id && qc->id == radio_qctrl[i].id) {
- memcpy(qc, &(radio_qctrl[i]),
- sizeof(*qc));
- return (0);
- }
- }
- return -EINVAL;
- }
- case VIDIOC_G_CTRL:
- {
- struct v4l2_control *ctrl= arg;
-
- switch (ctrl->id) {
- case V4L2_CID_AUDIO_MUTE:
- ctrl->value=rt->muted;
- return (0);
- case V4L2_CID_AUDIO_VOLUME:
- if (rt->muted)
- ctrl->value=0;
- else
- ctrl->value=65535;
- return (0);
- }
- return -EINVAL;
- }
- case VIDIOC_S_CTRL:
- {
- struct v4l2_control *ctrl= arg;
-
- switch (ctrl->id) {
- case V4L2_CID_AUDIO_MUTE:
- if (ctrl->value) {
- gemtek_mute(rt);
- } else {
- gemtek_unmute(rt);
- }
- return (0);
- case V4L2_CID_AUDIO_VOLUME:
- if (ctrl->value) {
- gemtek_unmute(rt);
- } else {
- gemtek_mute(rt);
- }
- return (0);
- }
- return -EINVAL;
- }
- default:
- return v4l_compat_translate_ioctl(inode,file,cmd,arg,
- gemtek_do_ioctl);
+/*
+ * Video 4 Linux stuff.
+ */
+
+static struct v4l2_queryctrl radio_qctrl[] = {
+ {
+ .id = V4L2_CID_AUDIO_MUTE,
+ .name = "Mute",
+ .minimum = 0,
+ .maximum = 1,
+ .default_value = 1,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ }, {
+ .id = V4L2_CID_AUDIO_VOLUME,
+ .name = "Volume",
+ .minimum = 0,
+ .maximum = 65535,
+ .step = 65535,
+ .default_value = 0xff,
+ .type = V4L2_CTRL_TYPE_INTEGER,
}
-}
+};
-static int gemtek_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
+static int gemtek_exclusive_open(struct inode *inode, struct file *file)
{
- return video_usercopy(inode, file, cmd, arg, gemtek_do_ioctl);
+ return test_and_set_bit(0, &in_use) ? -EBUSY : 0;
}
-static struct gemtek_device gemtek_unit;
+static int gemtek_exclusive_release(struct inode *inode, struct file *file)
+{
+ clear_bit(0, &in_use);
+ return 0;
+}
static const struct file_operations gemtek_fops = {
.owner = THIS_MODULE,
- .open = video_exclusive_open,
- .release = video_exclusive_release,
- .ioctl = gemtek_ioctl,
+ .open = gemtek_exclusive_open,
+ .release = gemtek_exclusive_release,
+ .ioctl = video_ioctl2,
+#ifdef CONFIG_COMPAT
.compat_ioctl = v4l_compat_ioctl32,
- .llseek = no_llseek,
+#endif
+ .llseek = no_llseek
};
-static struct video_device gemtek_radio=
+static int vidioc_querycap(struct file *file, void *priv,
+ struct v4l2_capability *v)
{
- .owner = THIS_MODULE,
- .name = "GemTek radio",
- .type = VID_TYPE_TUNER,
- .hardware = 0,
- .fops = &gemtek_fops,
-};
+ strlcpy(v->driver, "radio-gemtek", sizeof(v->driver));
+ strlcpy(v->card, "GemTek", sizeof(v->card));
+ sprintf(v->bus_info, "ISA");
+ v->version = RADIO_VERSION;
+ v->capabilities = V4L2_CAP_TUNER;
+ return 0;
+}
-static int __init gemtek_init(void)
+static int vidioc_g_tuner(struct file *file, void *priv, struct v4l2_tuner *v)
{
- if(io==-1)
- {
- printk(KERN_ERR "You must set an I/O address with io=0x20c, io=0x30c, io=0x24c or io=0x34c (io=0x020c or io=0x248 for the combined sound/radiocard)\n");
+ if (v->index > 0)
return -EINVAL;
- }
- if (!request_region(io, 4, "gemtek"))
- {
- printk(KERN_ERR "gemtek: port 0x%x already in use\n", io);
- return -EBUSY;
+ strcpy(v->name, "FM");
+ v->type = V4L2_TUNER_RADIO;
+ v->rangelow = GEMTEK_LOWFREQ;
+ v->rangehigh = GEMTEK_HIGHFREQ;
+ v->capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO;
+ v->signal = 0xffff * gemtek_getsigstr();
+ if (v->signal) {
+ v->audmode = V4L2_TUNER_MODE_STEREO;
+ v->rxsubchans = V4L2_TUNER_SUB_STEREO;
+ } else {
+ v->audmode = V4L2_TUNER_MODE_MONO;
+ v->rxsubchans = V4L2_TUNER_SUB_MONO;
}
- gemtek_radio.priv=&gemtek_unit;
+ return 0;
+}
- if(video_register_device(&gemtek_radio, VFL_TYPE_RADIO, radio_nr)==-1)
- {
- release_region(io, 4);
+static int vidioc_s_tuner(struct file *file, void *priv, struct v4l2_tuner *v)
+{
+ if (v->index > 0)
return -EINVAL;
+ return 0;
+}
+
+static int vidioc_s_frequency(struct file *file, void *priv,
+ struct v4l2_frequency *f)
+{
+ struct gemtek_device *rt = video_drvdata(file);
+
+ gemtek_setfreq(rt, f->frequency);
+
+ return 0;
+}
+
+static int vidioc_g_frequency(struct file *file, void *priv,
+ struct v4l2_frequency *f)
+{
+ struct gemtek_device *rt = video_drvdata(file);
+
+ f->type = V4L2_TUNER_RADIO;
+ f->frequency = rt->lastfreq;
+ return 0;
+}
+
+static int vidioc_queryctrl(struct file *file, void *priv,
+ struct v4l2_queryctrl *qc)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(radio_qctrl); ++i) {
+ if (qc->id && qc->id == radio_qctrl[i].id) {
+ memcpy(qc, &(radio_qctrl[i]), sizeof(*qc));
+ return 0;
+ }
}
- printk(KERN_INFO "GemTek Radio Card driver.\n");
+ return -EINVAL;
+}
- spin_lock_init(&lock);
+static int vidioc_g_ctrl(struct file *file, void *priv,
+ struct v4l2_control *ctrl)
+{
+ struct gemtek_device *rt = video_drvdata(file);
- /* this is _maybe_ unnecessary */
- outb(0x01, io);
+ switch (ctrl->id) {
+ case V4L2_CID_AUDIO_MUTE:
+ ctrl->value = rt->muted;
+ return 0;
+ case V4L2_CID_AUDIO_VOLUME:
+ if (rt->muted)
+ ctrl->value = 0;
+ else
+ ctrl->value = 65535;
+ return 0;
+ }
+ return -EINVAL;
+}
- /* mute card - prevents noisy bootups */
- gemtek_unit.muted = 0;
- gemtek_mute(&gemtek_unit);
+static int vidioc_s_ctrl(struct file *file, void *priv,
+ struct v4l2_control *ctrl)
+{
+ struct gemtek_device *rt = video_drvdata(file);
+ switch (ctrl->id) {
+ case V4L2_CID_AUDIO_MUTE:
+ if (ctrl->value)
+ gemtek_mute(rt);
+ else
+ gemtek_unmute(rt);
+ return 0;
+ case V4L2_CID_AUDIO_VOLUME:
+ if (ctrl->value)
+ gemtek_unmute(rt);
+ else
+ gemtek_mute(rt);
+ return 0;
+ }
+ return -EINVAL;
+}
+
+static int vidioc_g_audio(struct file *file, void *priv, struct v4l2_audio *a)
+{
+ if (a->index > 1)
+ return -EINVAL;
+
+ strcpy(a->name, "Radio");
+ a->capability = V4L2_AUDCAP_STEREO;
return 0;
}
-MODULE_AUTHOR("Jonas Munsin");
-MODULE_DESCRIPTION("A driver for the GemTek Radio Card");
-MODULE_LICENSE("GPL");
+static int vidioc_g_input(struct file *filp, void *priv, unsigned int *i)
+{
+ *i = 0;
+ return 0;
+}
-module_param(io, int, 0);
-MODULE_PARM_DESC(io, "I/O address of the GemTek card (0x20c, 0x30c, 0x24c or 0x34c (0x20c or 0x248 have been reported to work for the combined sound/radiocard)).");
-module_param(radio_nr, int, 0);
+static int vidioc_s_input(struct file *filp, void *priv, unsigned int i)
+{
+ if (i != 0)
+ return -EINVAL;
+ return 0;
+}
-static void __exit gemtek_cleanup(void)
+static int vidioc_s_audio(struct file *file, void *priv, struct v4l2_audio *a)
{
- video_unregister_device(&gemtek_radio);
- release_region(io,4);
+ if (a->index != 0)
+ return -EINVAL;
+ return 0;
}
-module_init(gemtek_init);
-module_exit(gemtek_cleanup);
+static const struct v4l2_ioctl_ops gemtek_ioctl_ops = {
+ .vidioc_querycap = vidioc_querycap,
+ .vidioc_g_tuner = vidioc_g_tuner,
+ .vidioc_s_tuner = vidioc_s_tuner,
+ .vidioc_g_audio = vidioc_g_audio,
+ .vidioc_s_audio = vidioc_s_audio,
+ .vidioc_g_input = vidioc_g_input,
+ .vidioc_s_input = vidioc_s_input,
+ .vidioc_g_frequency = vidioc_g_frequency,
+ .vidioc_s_frequency = vidioc_s_frequency,
+ .vidioc_queryctrl = vidioc_queryctrl,
+ .vidioc_g_ctrl = vidioc_g_ctrl,
+ .vidioc_s_ctrl = vidioc_s_ctrl
+};
+
+static struct video_device gemtek_radio = {
+ .name = "GemTek Radio card",
+ .fops = &gemtek_fops,
+ .ioctl_ops = &gemtek_ioctl_ops,
+ .release = video_device_release_empty,
+};
/*
- Local variables:
- compile-command: "gcc -c -DMODVERSIONS -D__KERNEL__ -DMODULE -O6 -Wall -Wstrict-prototypes -I /home/blp/tmp/linux-2.1.111-rtrack/include radio-rtrack2.c"
- End:
-*/
+ * Initialization / cleanup related stuff.
+ */
+
+/*
+ * Initilize card.
+ */
+static int __init gemtek_init(void)
+{
+ printk(KERN_INFO RADIO_BANNER "\n");
+
+ spin_lock_init(&lock);
+
+ gemtek_probe();
+ if (io) {
+ if (!request_region(io, 1, "gemtek")) {
+ printk(KERN_ERR "I/O port 0x%x already in use.\n", io);
+ return -EBUSY;
+ }
+
+ if (!gemtek_verify(io))
+ printk(KERN_WARNING "Card at I/O port 0x%x does not "
+ "respond properly, check your "
+ "configuration.\n", io);
+ else
+ printk(KERN_INFO "Using I/O port 0x%x.\n", io);
+ } else if (probe) {
+ printk(KERN_ERR "Automatic probing failed and no "
+ "fixed I/O port defined.\n");
+ return -ENODEV;
+ } else {
+ printk(KERN_ERR "Automatic probing disabled but no fixed "
+ "I/O port defined.");
+ return -EINVAL;
+ }
+
+ video_set_drvdata(&gemtek_radio, &gemtek_unit);
+
+ if (video_register_device(&gemtek_radio, VFL_TYPE_RADIO, radio_nr) < 0) {
+ release_region(io, 1);
+ return -EBUSY;
+ }
+
+ /* Set defaults */
+ gemtek_unit.lastfreq = GEMTEK_LOWFREQ;
+ gemtek_unit.bu2614data = 0;
+
+ if (initmute)
+ gemtek_mute(&gemtek_unit);
+
+ return 0;
+}
+
+/*
+ * Module cleanup
+ */
+static void __exit gemtek_exit(void)
+{
+ if (shutdown) {
+ hardmute = 1; /* Turn off PLL */
+ gemtek_mute(&gemtek_unit);
+ } else {
+ printk(KERN_INFO "Module unloaded but card not muted!\n");
+ }
+
+ video_unregister_device(&gemtek_radio);
+ release_region(io, 1);
+}
+
+module_init(gemtek_init);
+module_exit(gemtek_exit);