# Multimedia Video device configuration
#
-menu "Radio Adapters"
- depends on VIDEO_DEV!=n
+menuconfig RADIO_ADAPTERS
+ bool "Radio Adapters"
+ depends on VIDEO_V4L2
+ default y
+ ---help---
+ Say Y here to enable selecting AM/FM radio adapters.
+
+if RADIO_ADAPTERS && VIDEO_V4L2
config RADIO_CADET
tristate "ADS Cadet AM/FM Tuner"
- depends on ISA && VIDEO_V4L1
+ depends on ISA && VIDEO_V4L2
---help---
Choose Y here if you have one of these AM/FM radio cards, and then
fill in the port address below.
config RADIO_RTRACK
tristate "AIMSlab RadioTrack (aka RadioReveal) support"
- depends on ISA && VIDEO_V4L1
+ depends on ISA && VIDEO_V4L2
---help---
Choose Y here if you have one of these FM radio cards, and then fill
in the port address below.
config RADIO_RTRACK2
tristate "AIMSlab RadioTrack II support"
- depends on ISA && VIDEO_V4L1
+ depends on ISA && VIDEO_V4L2
---help---
Choose Y here if you have this FM radio card, and then fill in the
port address below.
config RADIO_AZTECH
tristate "Aztech/Packard Bell Radio"
- depends on ISA && VIDEO_V4L1
+ depends on ISA && VIDEO_V4L2
---help---
Choose Y here if you have one of these FM radio cards, and then fill
in the port address below.
jumper sets the card to 0x358.
config RADIO_GEMTEK
- tristate "GemTek Radio Card support"
- depends on ISA && VIDEO_V4L1
+ tristate "GemTek Radio card (or compatible) support"
+ depends on ISA && VIDEO_V4L2
---help---
Choose Y here if you have this FM radio card, and then fill in the
- port address below.
+ I/O port address and settings below. The following cards either have
+ GemTek Radio tuner or are rebranded GemTek Radio cards:
+
+ - Sound Vision 16 Gold with FM Radio
+ - Typhoon Radio card (some models)
+ - Hama Radio card
In order to control your radio card, you will need to use programs
that are compatible with the Video For Linux API. Information on
module will be called radio-gemtek.
config RADIO_GEMTEK_PORT
- hex "GemTek i/o port (0x20c, 0x30c, 0x24c or 0x34c)"
+ hex "Fixed I/O port (0x20c, 0x30c, 0x24c, 0x34c, 0c24c or 0x28c)"
depends on RADIO_GEMTEK=y
default "34c"
help
Enter either 0x20c, 0x30c, 0x24c or 0x34c here. The card default is
0x34c, if you haven't changed the jumper setting on the card. On
Sound Vision 16 Gold PnP with FM Radio (ESS1869+FM Gemtek), the I/O
- port is 0x28c.
+ port is 0x20c, 0x248 or 0x28c.
+ If automatic I/O port probing is enabled this port will be used only
+ in case of automatic probing failure, ie. as a fallback.
+
+config RADIO_GEMTEK_PROBE
+ bool "Automatic I/O port probing"
+ depends on RADIO_GEMTEK=y
+ default y
+ help
+ Say Y here to enable automatic probing for GemTek Radio card. The
+ following ports will be probed: 0x20c, 0x30c, 0x24c, 0x34c, 0x248 and
+ 0x28c.
config RADIO_GEMTEK_PCI
tristate "GemTek PCI Radio Card support"
- depends on VIDEO_V4L1 && PCI
+ depends on VIDEO_V4L2 && PCI
---help---
Choose Y here if you have this PCI FM radio card.
config RADIO_MAXIRADIO
tristate "Guillemot MAXI Radio FM 2000 radio"
- depends on VIDEO_V4L1 && PCI
+ depends on VIDEO_V4L2 && PCI
---help---
Choose Y here if you have this radio card. This card may also be
found as Gemtek PCI FM.
config RADIO_MAESTRO
tristate "Maestro on board radio"
- depends on VIDEO_V4L1
+ depends on VIDEO_V4L2 && PCI
---help---
Say Y here to directly support the on-board radio tuner on the
Maestro 2 or 2E sound card.
To compile this driver as a module, choose M here: the
module will be called radio-maestro.
-config RADIO_MIROPCM20
- tristate "miroSOUND PCM20 radio"
- depends on ISA && VIDEO_V4L1 && SOUND_ACI_MIXER
- ---help---
- Choose Y here if you have this FM radio card. You also need to say Y
- to "ACI mixer (miroSOUND PCM1-pro/PCM12/PCM20 radio)" (in "Sound")
- for this to work.
-
- In order to control your radio card, you will need to use programs
- that are compatible with the Video For Linux API. Information on
- this API and pointers to "v4l" programs may be found at
- <file:Documentation/video4linux/API.html>.
-
- To compile this driver as a module, choose M here: the
- module will be called miropcm20.
-
-config RADIO_MIROPCM20_RDS
- tristate "miroSOUND PCM20 radio RDS user interface (EXPERIMENTAL)"
- depends on RADIO_MIROPCM20 && EXPERIMENTAL
- ---help---
- Choose Y here if you want to see RDS/RBDS information like
- RadioText, Programme Service name, Clock Time and date, Programme
- TYpe and Traffic Announcement/Programme identification. You also
- need to say Y to "miroSOUND PCM20 radio" and devfs!
-
- It's not possible to read the raw RDS packets from the device, so
- the driver cant provide an V4L interface for this. But the
- availability of RDS is reported over V4L by the basic driver
- already. Here RDS can be read from files in /dev/v4l/rds.
-
- To compile this driver as a module, choose M here: the
- module will be called miropcm20-rds.
-
config RADIO_SF16FMI
tristate "SF16FMI Radio"
- depends on ISA && VIDEO_V4L1
+ depends on ISA && VIDEO_V4L2
---help---
Choose Y here if you have one of these FM radio cards. If you
compile the driver into the kernel and your card is not PnP one, you
config RADIO_SF16FMR2
tristate "SF16FMR2 Radio"
- depends on ISA && VIDEO_V4L1
+ depends on ISA && VIDEO_V4L2
---help---
Choose Y here if you have one of these FM radio cards.
config RADIO_TERRATEC
tristate "TerraTec ActiveRadio ISA Standalone"
- depends on ISA && VIDEO_V4L1
+ depends on ISA && VIDEO_V4L2
---help---
Choose Y here if you have this FM radio card, and then fill in the
port address below. (TODO)
config RADIO_TRUST
tristate "Trust FM radio card"
- depends on ISA && VIDEO_V4L1
+ depends on ISA && VIDEO_V4L2
help
This is a driver for the Trust FM radio cards. Say Y if you have
such a card and want to use it under Linux.
config RADIO_TYPHOON
tristate "Typhoon Radio (a.k.a. EcoRadio)"
- depends on ISA && VIDEO_V4L1
+ depends on ISA && VIDEO_V4L2
---help---
Choose Y here if you have one of these FM radio cards, and then fill
in the port address and the frequency used for muting below.
To compile this driver as a module, choose M here: the
module will be called radio-typhoon.
-config RADIO_TYPHOON_PROC_FS
- bool "Support for /proc/radio-typhoon"
- depends on PROC_FS && RADIO_TYPHOON
- help
- Say Y here if you want the typhoon radio card driver to write
- status information (frequency, volume, muted, mute frequency,
- base address) to /proc/radio-typhoon. The file can be viewed with
- your favorite pager (i.e. use "more /proc/radio-typhoon" or "less
- /proc/radio-typhoon" or simply "cat /proc/radio-typhoon").
-
config RADIO_TYPHOON_PORT
hex "Typhoon I/O port (0x316 or 0x336)"
depends on RADIO_TYPHOON=y
config RADIO_ZOLTRIX
tristate "Zoltrix Radio"
- depends on ISA && VIDEO_V4L1
+ depends on ISA && VIDEO_V4L2
---help---
Choose Y here if you have one of these FM radio cards, and then fill
in the port address below.
help
Enter the I/O port of your Zoltrix radio card.
-endmenu
+config I2C_SI4713
+ tristate "I2C driver for Silicon Labs Si4713 device"
+ depends on I2C && VIDEO_V4L2
+ ---help---
+ Say Y here if you want support to Si4713 I2C device.
+ This device driver supports only i2c bus.
+
+ To compile this driver as a module, choose M here: the
+ module will be called si4713.
+
+config RADIO_SI4713
+ tristate "Silicon Labs Si4713 FM Radio Transmitter support"
+ depends on I2C && VIDEO_V4L2
+ select I2C_SI4713
+ ---help---
+ Say Y here if you want support to Si4713 FM Radio Transmitter.
+ This device can transmit audio through FM. It can transmit
+ RDS and RBDS signals as well. This module is the v4l2 radio
+ interface for the i2c driver of this device.
+
+ To compile this driver as a module, choose M here: the
+ module will be called radio-si4713.
+
+config USB_DSBR
+ tristate "D-Link/GemTek USB FM radio support"
+ depends on USB && VIDEO_V4L2
+ ---help---
+ Say Y here if you want to connect this type of radio to your
+ computer's USB port. Note that the audio is not digital, and
+ you must connect the line out connector to a sound card or a
+ set of speakers.
+
+ To compile this driver as a module, choose M here: the
+ module will be called dsbr100.
+
+config RADIO_SI470X
+ bool "Silicon Labs Si470x FM Radio Receiver support"
+ depends on VIDEO_V4L2
+
+source "drivers/media/radio/si470x/Kconfig"
+
+config USB_MR800
+ tristate "AverMedia MR 800 USB FM radio support"
+ depends on USB && VIDEO_V4L2
+ ---help---
+ Say Y here if you want to connect this type of radio to your
+ computer's USB port. Note that the audio is not digital, and
+ you must connect the line out connector to a sound card or a
+ set of speakers.
+
+ To compile this driver as a module, choose M here: the
+ module will be called radio-mr800.
+
+config RADIO_TEA5764
+ tristate "TEA5764 I2C FM radio support"
+ depends on I2C && VIDEO_V4L2
+ ---help---
+ Say Y here if you want to use the TEA5764 FM chip found in
+ EZX phones. This FM chip is present in EZX phones from Motorola,
+ connected to internal pxa I2C bus.
+
+ To compile this driver as a module, choose M here: the
+ module will be called radio-tea5764.
+
+config RADIO_TEA5764_XTAL
+ bool "TEA5764 crystal reference"
+ depends on RADIO_TEA5764=y
+ default y
+ help
+ Say Y here if TEA5764 have a 32768 Hz crystal in circuit, say N
+ here if TEA5764 reference frequency is connected in FREQIN.
+
+config RADIO_TEF6862
+ tristate "TEF6862 Car Radio Enhanced Selectivity Tuner"
+ depends on I2C && VIDEO_V4L2
+ ---help---
+ Say Y here if you want to use the TEF6862 Car Radio Enhanced
+ Selectivity Tuner, found for instance on the Russellville development
+ board. On the russellville the device is connected to internal
+ timberdale I2C bus.
+
+ To compile this driver as a module, choose M here: the
+ module will be called TEF6862.
+endif # RADIO_ADAPTERS
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff