#include "budget.h"
#include "stv0299.h"
-#include "tda10021.h"
+#include "stb0899_drv.h"
+#include "stb0899_reg.h"
+#include "stb0899_cfg.h"
+#include "tda8261.h"
+#include "tda8261_cfg.h"
+#include "tda1002x.h"
#include "tda1004x.h"
+#include "tua6100.h"
#include "dvb-pll.h"
#include <media/saa7146_vv.h>
#include <linux/module.h>
#define DEBICICAM 0x02420000
+#define SLOTSTATUS_NONE 1
+#define SLOTSTATUS_PRESENT 2
+#define SLOTSTATUS_RESET 4
+#define SLOTSTATUS_READY 8
+#define SLOTSTATUS_OCCUPIED (SLOTSTATUS_PRESENT|SLOTSTATUS_RESET|SLOTSTATUS_READY)
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
struct budget_av {
struct budget budget;
struct video_device *vd;
struct tasklet_struct ciintf_irq_tasklet;
int slot_status;
struct dvb_ca_en50221 ca;
+ u8 reinitialise_demod:1;
};
+static int ciintf_slot_shutdown(struct dvb_ca_en50221 *ca, int slot);
+
+
/* GPIO Connections:
* 0 - Vcc/Reset (Reset is controlled by capacitor). Resets the frontend *AS WELL*!
* 1 - CI memory select 0=>IO memory, 1=>Attribute Memory
udelay(1);
result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 0xfff, 1, 0, 1);
-
- if (result == -ETIMEDOUT)
- budget_av->slot_status = 0;
+ if (result == -ETIMEDOUT) {
+ ciintf_slot_shutdown(ca, slot);
+ printk(KERN_INFO "budget-av: cam ejected 1\n");
+ }
return result;
}
udelay(1);
result = ttpci_budget_debiwrite(&budget_av->budget, DEBICICAM, address & 0xfff, 1, value, 0, 1);
-
- if (result == -ETIMEDOUT)
- budget_av->slot_status = 0;
+ if (result == -ETIMEDOUT) {
+ ciintf_slot_shutdown(ca, slot);
+ printk(KERN_INFO "budget-av: cam ejected 2\n");
+ }
return result;
}
udelay(1);
result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 3, 1, 0, 0);
-
- if (result == -ETIMEDOUT)
- budget_av->slot_status = 0;
+ if (result == -ETIMEDOUT) {
+ ciintf_slot_shutdown(ca, slot);
+ printk(KERN_INFO "budget-av: cam ejected 3\n");
+ return -ETIMEDOUT;
+ }
return result;
}
udelay(1);
result = ttpci_budget_debiwrite(&budget_av->budget, DEBICICAM, address & 3, 1, value, 0, 0);
-
- if (result == -ETIMEDOUT)
- budget_av->slot_status = 0;
+ if (result == -ETIMEDOUT) {
+ ciintf_slot_shutdown(ca, slot);
+ printk(KERN_INFO "budget-av: cam ejected 5\n");
+ }
return result;
}
{
struct budget_av *budget_av = (struct budget_av *) ca->data;
struct saa7146_dev *saa = budget_av->budget.dev;
- int timeout = 50; // 5 seconds (4.4.6 Ready)
if (slot != 0)
return -EINVAL;
dprintk(1, "ciintf_slot_reset\n");
+ budget_av->slot_status = SLOTSTATUS_RESET;
saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTHI); /* disable card */
msleep(20); /* 20 ms Vcc settling time */
saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTLO); /* enable card */
+ ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB);
+ msleep(20);
- /* This should have been based on pin 16 READY of the pcmcia port,
- * but AFAICS it is not routed to the saa7146 */
- while (--timeout > 0 && ciintf_read_attribute_mem(ca, slot, 0) != 0x1d)
- msleep(100);
-
- /* reinitialise the frontend */
- dvb_frontend_reinitialise(budget_av->budget.dvb_frontend);
-
- if (timeout <= 0)
- {
- printk(KERN_ERR "budget-av: cam reset failed (timeout).\n");
- saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTHI); /* disable card */
- return -ETIMEDOUT;
- }
+ /* reinitialise the frontend if necessary */
+ if (budget_av->reinitialise_demod)
+ dvb_frontend_reinitialise(budget_av->budget.dvb_frontend);
return 0;
}
dprintk(1, "ciintf_slot_shutdown\n");
ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB);
- budget_av->slot_status = 0;
+ budget_av->slot_status = SLOTSTATUS_NONE;
+
return 0;
}
dprintk(1, "ciintf_slot_ts_enable: %d\n", budget_av->slot_status);
ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTA);
+
return 0;
}
{
struct budget_av *budget_av = (struct budget_av *) ca->data;
struct saa7146_dev *saa = budget_av->budget.dev;
- int cam_present = 0;
+ int result;
if (slot != 0)
return -EINVAL;
- if (!budget_av->slot_status)
- {
- // first of all test the card detect line
+ /* test the card detect line - needs to be done carefully
+ * since it never goes high for some CAMs on this interface (e.g. topuptv) */
+ if (budget_av->slot_status == SLOTSTATUS_NONE) {
saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT);
udelay(1);
- if (saa7146_read(saa, PSR) & MASK_06)
- {
- cam_present = 1;
+ if (saa7146_read(saa, PSR) & MASK_06) {
+ if (budget_av->slot_status == SLOTSTATUS_NONE) {
+ budget_av->slot_status = SLOTSTATUS_PRESENT;
+ printk(KERN_INFO "budget-av: cam inserted A\n");
+ }
}
saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO);
+ }
- // that is unreliable however, so try and read from IO memory
- if (!cam_present)
- {
- saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO);
- if (ttpci_budget_debiread(&budget_av->budget, DEBICICAM, 0, 1, 0, 1) != -ETIMEDOUT)
- {
- cam_present = 1;
+ /* We also try and read from IO memory to work round the above detection bug. If
+ * there is no CAM, we will get a timeout. Only done if there is no cam
+ * present, since this test actually breaks some cams :(
+ *
+ * if the CI interface is not open, we also do the above test since we
+ * don't care if the cam has problems - we'll be resetting it on open() anyway */
+ if ((budget_av->slot_status == SLOTSTATUS_NONE) || (!open)) {
+ saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO);
+ result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, 0, 1, 0, 1);
+ if ((result >= 0) && (budget_av->slot_status == SLOTSTATUS_NONE)) {
+ budget_av->slot_status = SLOTSTATUS_PRESENT;
+ printk(KERN_INFO "budget-av: cam inserted B\n");
+ } else if (result < 0) {
+ if (budget_av->slot_status != SLOTSTATUS_NONE) {
+ ciintf_slot_shutdown(ca, slot);
+ printk(KERN_INFO "budget-av: cam ejected 5\n");
+ return 0;
}
}
+ }
- // did we find something?
- if (cam_present) {
- printk(KERN_INFO "budget-av: cam inserted\n");
- budget_av->slot_status = 1;
- }
- } else if (!open) {
- saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO);
- if (ttpci_budget_debiread(&budget_av->budget, DEBICICAM, 0, 1, 0, 1) == -ETIMEDOUT)
- {
- printk(KERN_INFO "budget-av: cam ejected\n");
- saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTHI); /* disable card */
- budget_av->slot_status = 0;
+ /* read from attribute memory in reset/ready state to know when the CAM is ready */
+ if (budget_av->slot_status == SLOTSTATUS_RESET) {
+ result = ciintf_read_attribute_mem(ca, slot, 0);
+ if (result == 0x1d) {
+ budget_av->slot_status = SLOTSTATUS_READY;
}
}
- if (budget_av->slot_status == 1)
- return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY;
-
+ /* work out correct return code */
+ if (budget_av->slot_status != SLOTSTATUS_NONE) {
+ if (budget_av->slot_status & SLOTSTATUS_READY) {
+ return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY;
+ }
+ return DVB_CA_EN50221_POLL_CAM_PRESENT;
+ }
return 0;
}
saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO);
/* Enable DEBI pins */
- saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16) | 0x800);
+ saa7146_write(saa, MC1, MASK_27 | MASK_11);
/* register CI interface */
budget_av->ca.owner = THIS_MODULE;
budget_av->ca.slot_ts_enable = ciintf_slot_ts_enable;
budget_av->ca.poll_slot_status = ciintf_poll_slot_status;
budget_av->ca.data = budget_av;
+ budget_av->budget.ci_present = 1;
+ budget_av->slot_status = SLOTSTATUS_NONE;
if ((result = dvb_ca_en50221_init(&budget_av->budget.dvb_adapter,
&budget_av->ca, 0, 1)) != 0) {
}
printk(KERN_INFO "budget-av: ci interface initialised.\n");
- budget_av->budget.ci_present = 1;
return 0;
error:
- saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16));
+ saa7146_write(saa, MC1, MASK_27);
return result;
}
dvb_ca_en50221_release(&budget_av->ca);
/* disable DEBI pins */
- saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16));
+ saa7146_write(saa, MC1, MASK_27);
}
return 0;
}
-static int philips_su1278_ty_ci_pll_set(struct dvb_frontend *fe,
- struct i2c_adapter *i2c,
- struct dvb_frontend_parameters *params)
+static int philips_su1278_ty_ci_tuner_set_params(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *params)
{
u32 div;
u8 buf[4];
+ struct budget *budget = (struct budget *) fe->dvb->priv;
struct i2c_msg msg = {.addr = 0x61,.flags = 0,.buf = buf,.len = sizeof(buf) };
if ((params->frequency < 950000) || (params->frequency > 2150000))
else if (params->frequency < 2150000)
buf[3] |= 0xC0;
- if (i2c_transfer(i2c, &msg, 1) != 1)
- return -EIO;
- return 0;
-}
-
-#define MIN2(a,b) ((a) < (b) ? (a) : (b))
-#define MIN3(a,b,c) MIN2(MIN2(a,b),c)
-
-static int philips_su1278sh2_tua6100_pll_set(struct dvb_frontend *fe,
- struct i2c_adapter *i2c,
- struct dvb_frontend_parameters *params)
-{
- u8 reg0 [2] = { 0x00, 0x00 };
- u8 reg1 [4] = { 0x01, 0x00, 0x00, 0x00 };
- u8 reg2 [3] = { 0x02, 0x00, 0x00 };
- int _fband;
- int first_ZF;
- int R, A, N, P, M;
- struct i2c_msg msg = {.addr = 0x60,.flags = 0,.buf = NULL,.len = 0 };
- int freq = params->frequency;
-
- first_ZF = (freq) / 1000;
-
- if (abs(MIN2(abs(first_ZF-1190),abs(first_ZF-1790))) <
- abs(MIN3(abs(first_ZF-1202),abs(first_ZF-1542),abs(first_ZF-1890))))
- _fband = 2;
- else
- _fband = 3;
-
- if (_fband == 2) {
- if (((first_ZF >= 950) && (first_ZF < 1350)) ||
- ((first_ZF >= 1430) && (first_ZF < 1950)))
- reg0[1] = 0x07;
- else if (((first_ZF >= 1350) && (first_ZF < 1430)) ||
- ((first_ZF >= 1950) && (first_ZF < 2150)))
- reg0[1] = 0x0B;
- }
-
- if(_fband == 3) {
- if (((first_ZF >= 950) && (first_ZF < 1350)) ||
- ((first_ZF >= 1455) && (first_ZF < 1950)))
- reg0[1] = 0x07;
- else if (((first_ZF >= 1350) && (first_ZF < 1420)) ||
- ((first_ZF >= 1950) && (first_ZF < 2150)))
- reg0[1] = 0x0B;
- else if ((first_ZF >= 1420) && (first_ZF < 1455))
- reg0[1] = 0x0F;
- }
-
- if (first_ZF > 1525)
- reg1[1] |= 0x80;
- else
- reg1[1] &= 0x7F;
-
- if (_fband == 2) {
- if (first_ZF > 1430) { /* 1430MHZ */
- reg1[1] &= 0xCF; /* N2 */
- reg2[1] &= 0xCF; /* R2 */
- reg2[1] |= 0x10;
- } else {
- reg1[1] &= 0xCF; /* N2 */
- reg1[1] |= 0x20;
- reg2[1] &= 0xCF; /* R2 */
- reg2[1] |= 0x10;
- }
- }
-
- if (_fband == 3) {
- if ((first_ZF >= 1455) &&
- (first_ZF < 1630)) {
- reg1[1] &= 0xCF; /* N2 */
- reg1[1] |= 0x20;
- reg2[1] &= 0xCF; /* R2 */
- } else {
- if (first_ZF < 1455) {
- reg1[1] &= 0xCF; /* N2 */
- reg1[1] |= 0x20;
- reg2[1] &= 0xCF; /* R2 */
- reg2[1] |= 0x10;
- } else {
- if (first_ZF >= 1630) {
- reg1[1] &= 0xCF; /* N2 */
- reg2[1] &= 0xCF; /* R2 */
- reg2[1] |= 0x10;
- }
- }
- }
- }
-
- /* set ports, enable P0 for symbol rates > 4Ms/s */
- if (params->u.qpsk.symbol_rate >= 4000000)
- reg1[1] |= 0x0c;
- else
- reg1[1] |= 0x04;
-
- reg2[1] |= 0x0c;
-
- R = 64;
- A = 64;
- P = 64; //32
-
- M = (freq * R) / 4; /* in Mhz */
- N = (M - A * 1000) / (P * 1000);
-
- reg1[1] |= (N >> 9) & 0x03;
- reg1[2] = (N >> 1) & 0xff;
- reg1[3] = (N << 7) & 0x80;
-
- reg2[1] |= (R >> 8) & 0x03;
- reg2[2] = R & 0xFF; /* R */
-
- reg1[3] |= A & 0x7f; /* A */
-
- if (P == 64)
- reg1[1] |= 0x40; /* Prescaler 64/65 */
-
- reg0[1] |= 0x03;
-
- /* already enabled - do not reenable i2c repeater or TX fails */
- msg.buf = reg0;
- msg.len = sizeof(reg0);
- if (i2c_transfer(i2c, &msg, 1) != 1)
- return -EIO;
-
- stv0299_enable_plli2c(fe);
- msg.buf = reg1;
- msg.len = sizeof(reg1);
- if (i2c_transfer(i2c, &msg, 1) != 1)
- return -EIO;
-
- stv0299_enable_plli2c(fe);
- msg.buf = reg2;
- msg.len = sizeof(reg2);
- if (i2c_transfer(i2c, &msg, 1) != 1)
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+ if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1)
return -EIO;
-
return 0;
}
.mclk = 88000000UL,
.invert = 0,
.skip_reinit = 0,
- .lock_output = STV0229_LOCKOUTPUT_1,
+ .lock_output = STV0299_LOCKOUTPUT_1,
.volt13_op0_op1 = STV0299_VOLT13_OP0,
.min_delay_ms = 100,
.set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate,
- .pll_set = philips_su1278_ty_ci_pll_set,
};
.mclk = 88000000UL,
.invert = 0,
.skip_reinit = 0,
- .lock_output = STV0229_LOCKOUTPUT_0,
+ .lock_output = STV0299_LOCKOUTPUT_0,
.volt13_op0_op1 = STV0299_VOLT13_OP0,
.min_delay_ms = 100,
.set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate,
- .pll_set = philips_su1278_ty_ci_pll_set,
};
static struct stv0299_config cinergy_1200s_1894_0010_config = {
.mclk = 88000000UL,
.invert = 1,
.skip_reinit = 0,
- .lock_output = STV0229_LOCKOUTPUT_1,
+ .lock_output = STV0299_LOCKOUTPUT_1,
.volt13_op0_op1 = STV0299_VOLT13_OP0,
.min_delay_ms = 100,
.set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate,
- .pll_set = philips_su1278sh2_tua6100_pll_set,
};
-static int philips_cu1216_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
+static int philips_cu1216_tuner_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
{
struct budget *budget = (struct budget *) fe->dvb->priv;
- u8 buf[4];
+ u8 buf[6];
struct i2c_msg msg = {.addr = 0x60,.flags = 0,.buf = buf,.len = sizeof(buf) };
+ int i;
+#define CU1216_IF 36125000
#define TUNER_MUL 62500
- u32 div = (params->frequency + 36125000 + TUNER_MUL / 2) / TUNER_MUL;
+ u32 div = (params->frequency + CU1216_IF + TUNER_MUL / 2) / TUNER_MUL;
buf[0] = (div >> 8) & 0x7f;
buf[1] = div & 0xff;
- buf[2] = 0x86;
+ buf[2] = 0xce;
buf[3] = (params->frequency < 150000000 ? 0x01 :
params->frequency < 445000000 ? 0x02 : 0x04);
+ buf[4] = 0xde;
+ buf[5] = 0x20;
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1)
return -EIO;
+
+ /* wait for the pll lock */
+ msg.flags = I2C_M_RD;
+ msg.len = 1;
+ for (i = 0; i < 20; i++) {
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+ if (i2c_transfer(&budget->i2c_adap, &msg, 1) == 1 && (buf[0] & 0x40))
+ break;
+ msleep(10);
+ }
+
+ /* switch the charge pump to the lower current */
+ msg.flags = 0;
+ msg.len = 2;
+ msg.buf = &buf[2];
+ buf[2] &= ~0x40;
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+ if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1)
+ return -EIO;
+
return 0;
}
-static struct tda10021_config philips_cu1216_config = {
+static struct tda1002x_config philips_cu1216_config = {
.demod_address = 0x0c,
- .pll_set = philips_cu1216_pll_set,
+ .invert = 1,
};
+static struct tda1002x_config philips_cu1216_config_altaddress = {
+ .demod_address = 0x0d,
+ .invert = 0,
+};
+static struct tda10023_config philips_cu1216_tda10023_config = {
+ .demod_address = 0x0c,
+ .invert = 1,
+};
-
-static int philips_tu1216_pll_init(struct dvb_frontend *fe)
+static int philips_tu1216_tuner_init(struct dvb_frontend *fe)
{
struct budget *budget = (struct budget *) fe->dvb->priv;
static u8 tu1216_init[] = { 0x0b, 0xf5, 0x85, 0xab };
struct i2c_msg tuner_msg = {.addr = 0x60,.flags = 0,.buf = tu1216_init,.len = sizeof(tu1216_init) };
// setup PLL configuration
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
if (i2c_transfer(&budget->i2c_adap, &tuner_msg, 1) != 1)
return -EIO;
msleep(1);
return 0;
}
-static int philips_tu1216_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
+static int philips_tu1216_tuner_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
{
struct budget *budget = (struct budget *) fe->dvb->priv;
u8 tuner_buf[4];
tuner_buf[2] = 0xca;
tuner_buf[3] = (cp << 5) | (filter << 3) | band;
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
if (i2c_transfer(&budget->i2c_adap, &tuner_msg, 1) != 1)
return -EIO;
.xtal_freq = TDA10046_XTAL_4M,
.agc_config = TDA10046_AGC_DEFAULT,
.if_freq = TDA10046_FREQ_3617,
- .pll_init = philips_tu1216_pll_init,
- .pll_set = philips_tu1216_pll_set,
- .pll_sleep = NULL,
.request_firmware = philips_tu1216_request_firmware,
};
0xff, 0xff
};
-static int philips_sd1878_tda8261_pll_set(struct dvb_frontend *fe,
- struct i2c_adapter *i2c,
- struct dvb_frontend_parameters *params)
-{
- u8 buf[4];
- int rc;
- struct i2c_msg tuner_msg = {.addr=0x60,.flags=0,.buf=buf,.len=sizeof(buf)};
-
- if((params->frequency < 950000) || (params->frequency > 2150000))
- return -EINVAL;
-
- rc=dvb_pll_configure(&dvb_pll_philips_sd1878_tda8261, buf,
- params->frequency, 0);
- if(rc < 0) return rc;
-
- if(i2c_transfer(i2c, &tuner_msg, 1) != 1)
- return -EIO;
-
- return 0;
-}
-
static int philips_sd1878_ci_set_symbol_rate(struct dvb_frontend *fe,
u32 srate, u32 ratio)
{
static struct stv0299_config philips_sd1878_config = {
.demod_address = 0x68,
- .inittab = philips_sd1878_inittab,
+ .inittab = philips_sd1878_inittab,
.mclk = 88000000UL,
.invert = 0,
.skip_reinit = 0,
- .lock_output = STV0229_LOCKOUTPUT_1,
+ .lock_output = STV0299_LOCKOUTPUT_1,
.volt13_op0_op1 = STV0299_VOLT13_OP0,
.min_delay_ms = 100,
.set_symbol_rate = philips_sd1878_ci_set_symbol_rate,
- .pll_set = philips_sd1878_tda8261_pll_set,
+};
+
+/* KNC1 DVB-S (STB0899) Inittab */
+static const struct stb0899_s1_reg knc1_stb0899_s1_init_1[] = {
+
+ { STB0899_DEV_ID , 0x81 },
+ { STB0899_DISCNTRL1 , 0x32 },
+ { STB0899_DISCNTRL2 , 0x80 },
+ { STB0899_DISRX_ST0 , 0x04 },
+ { STB0899_DISRX_ST1 , 0x00 },
+ { STB0899_DISPARITY , 0x00 },
+ { STB0899_DISFIFO , 0x00 },
+ { STB0899_DISSTATUS , 0x20 },
+ { STB0899_DISF22 , 0x8c },
+ { STB0899_DISF22RX , 0x9a },
+ { STB0899_SYSREG , 0x0b },
+ { STB0899_ACRPRESC , 0x11 },
+ { STB0899_ACRDIV1 , 0x0a },
+ { STB0899_ACRDIV2 , 0x05 },
+ { STB0899_DACR1 , 0x00 },
+ { STB0899_DACR2 , 0x00 },
+ { STB0899_OUTCFG , 0x00 },
+ { STB0899_MODECFG , 0x00 },
+ { STB0899_IRQSTATUS_3 , 0x30 },
+ { STB0899_IRQSTATUS_2 , 0x00 },
+ { STB0899_IRQSTATUS_1 , 0x00 },
+ { STB0899_IRQSTATUS_0 , 0x00 },
+ { STB0899_IRQMSK_3 , 0xf3 },
+ { STB0899_IRQMSK_2 , 0xfc },
+ { STB0899_IRQMSK_1 , 0xff },
+ { STB0899_IRQMSK_0 , 0xff },
+ { STB0899_IRQCFG , 0x00 },
+ { STB0899_I2CCFG , 0x88 },
+ { STB0899_I2CRPT , 0x58 }, /* Repeater=8, Stop=disabled */
+ { STB0899_IOPVALUE5 , 0x00 },
+ { STB0899_IOPVALUE4 , 0x20 },
+ { STB0899_IOPVALUE3 , 0xc9 },
+ { STB0899_IOPVALUE2 , 0x90 },
+ { STB0899_IOPVALUE1 , 0x40 },
+ { STB0899_IOPVALUE0 , 0x00 },
+ { STB0899_GPIO00CFG , 0x82 },
+ { STB0899_GPIO01CFG , 0x82 },
+ { STB0899_GPIO02CFG , 0x82 },
+ { STB0899_GPIO03CFG , 0x82 },
+ { STB0899_GPIO04CFG , 0x82 },
+ { STB0899_GPIO05CFG , 0x82 },
+ { STB0899_GPIO06CFG , 0x82 },
+ { STB0899_GPIO07CFG , 0x82 },
+ { STB0899_GPIO08CFG , 0x82 },
+ { STB0899_GPIO09CFG , 0x82 },
+ { STB0899_GPIO10CFG , 0x82 },
+ { STB0899_GPIO11CFG , 0x82 },
+ { STB0899_GPIO12CFG , 0x82 },
+ { STB0899_GPIO13CFG , 0x82 },
+ { STB0899_GPIO14CFG , 0x82 },
+ { STB0899_GPIO15CFG , 0x82 },
+ { STB0899_GPIO16CFG , 0x82 },
+ { STB0899_GPIO17CFG , 0x82 },
+ { STB0899_GPIO18CFG , 0x82 },
+ { STB0899_GPIO19CFG , 0x82 },
+ { STB0899_GPIO20CFG , 0x82 },
+ { STB0899_SDATCFG , 0xb8 },
+ { STB0899_SCLTCFG , 0xba },
+ { STB0899_AGCRFCFG , 0x08 }, /* 0x1c */
+ { STB0899_GPIO22 , 0x82 }, /* AGCBB2CFG */
+ { STB0899_GPIO21 , 0x91 }, /* AGCBB1CFG */
+ { STB0899_DIRCLKCFG , 0x82 },
+ { STB0899_CLKOUT27CFG , 0x7e },
+ { STB0899_STDBYCFG , 0x82 },
+ { STB0899_CS0CFG , 0x82 },
+ { STB0899_CS1CFG , 0x82 },
+ { STB0899_DISEQCOCFG , 0x20 },
+ { STB0899_GPIO32CFG , 0x82 },
+ { STB0899_GPIO33CFG , 0x82 },
+ { STB0899_GPIO34CFG , 0x82 },
+ { STB0899_GPIO35CFG , 0x82 },
+ { STB0899_GPIO36CFG , 0x82 },
+ { STB0899_GPIO37CFG , 0x82 },
+ { STB0899_GPIO38CFG , 0x82 },
+ { STB0899_GPIO39CFG , 0x82 },
+ { STB0899_NCOARSE , 0x15 }, /* 0x15 = 27 Mhz Clock, F/3 = 198MHz, F/6 = 99MHz */
+ { STB0899_SYNTCTRL , 0x02 }, /* 0x00 = CLK from CLKI, 0x02 = CLK from XTALI */
+ { STB0899_FILTCTRL , 0x00 },
+ { STB0899_SYSCTRL , 0x00 },
+ { STB0899_STOPCLK1 , 0x20 },
+ { STB0899_STOPCLK2 , 0x00 },
+ { STB0899_INTBUFSTATUS , 0x00 },
+ { STB0899_INTBUFCTRL , 0x0a },
+ { 0xffff , 0xff },
+};
+
+static const struct stb0899_s1_reg knc1_stb0899_s1_init_3[] = {
+ { STB0899_DEMOD , 0x00 },
+ { STB0899_RCOMPC , 0xc9 },
+ { STB0899_AGC1CN , 0x41 },
+ { STB0899_AGC1REF , 0x08 },
+ { STB0899_RTC , 0x7a },
+ { STB0899_TMGCFG , 0x4e },
+ { STB0899_AGC2REF , 0x33 },
+ { STB0899_TLSR , 0x84 },
+ { STB0899_CFD , 0xee },
+ { STB0899_ACLC , 0x87 },
+ { STB0899_BCLC , 0x94 },
+ { STB0899_EQON , 0x41 },
+ { STB0899_LDT , 0xdd },
+ { STB0899_LDT2 , 0xc9 },
+ { STB0899_EQUALREF , 0xb4 },
+ { STB0899_TMGRAMP , 0x10 },
+ { STB0899_TMGTHD , 0x30 },
+ { STB0899_IDCCOMP , 0xfb },
+ { STB0899_QDCCOMP , 0x03 },
+ { STB0899_POWERI , 0x3b },
+ { STB0899_POWERQ , 0x3d },
+ { STB0899_RCOMP , 0x81 },
+ { STB0899_AGCIQIN , 0x80 },
+ { STB0899_AGC2I1 , 0x04 },
+ { STB0899_AGC2I2 , 0xf5 },
+ { STB0899_TLIR , 0x25 },
+ { STB0899_RTF , 0x80 },
+ { STB0899_DSTATUS , 0x00 },
+ { STB0899_LDI , 0xca },
+ { STB0899_CFRM , 0xf1 },
+ { STB0899_CFRL , 0xf3 },
+ { STB0899_NIRM , 0x2a },
+ { STB0899_NIRL , 0x05 },
+ { STB0899_ISYMB , 0x17 },
+ { STB0899_QSYMB , 0xfa },
+ { STB0899_SFRH , 0x2f },
+ { STB0899_SFRM , 0x68 },
+ { STB0899_SFRL , 0x40 },
+ { STB0899_SFRUPH , 0x2f },
+ { STB0899_SFRUPM , 0x68 },
+ { STB0899_SFRUPL , 0x40 },
+ { STB0899_EQUAI1 , 0xfd },
+ { STB0899_EQUAQ1 , 0x04 },
+ { STB0899_EQUAI2 , 0x0f },
+ { STB0899_EQUAQ2 , 0xff },
+ { STB0899_EQUAI3 , 0xdf },
+ { STB0899_EQUAQ3 , 0xfa },
+ { STB0899_EQUAI4 , 0x37 },
+ { STB0899_EQUAQ4 , 0x0d },
+ { STB0899_EQUAI5 , 0xbd },
+ { STB0899_EQUAQ5 , 0xf7 },
+ { STB0899_DSTATUS2 , 0x00 },
+ { STB0899_VSTATUS , 0x00 },
+ { STB0899_VERROR , 0xff },
+ { STB0899_IQSWAP , 0x2a },
+ { STB0899_ECNT1M , 0x00 },
+ { STB0899_ECNT1L , 0x00 },
+ { STB0899_ECNT2M , 0x00 },
+ { STB0899_ECNT2L , 0x00 },
+ { STB0899_ECNT3M , 0x00 },
+ { STB0899_ECNT3L , 0x00 },
+ { STB0899_FECAUTO1 , 0x06 },
+ { STB0899_FECM , 0x01 },
+ { STB0899_VTH12 , 0xf0 },
+ { STB0899_VTH23 , 0xa0 },
+ { STB0899_VTH34 , 0x78 },
+ { STB0899_VTH56 , 0x4e },
+ { STB0899_VTH67 , 0x48 },
+ { STB0899_VTH78 , 0x38 },
+ { STB0899_PRVIT , 0xff },
+ { STB0899_VITSYNC , 0x19 },
+ { STB0899_RSULC , 0xb1 }, /* DVB = 0xb1, DSS = 0xa1 */
+ { STB0899_TSULC , 0x42 },
+ { STB0899_RSLLC , 0x40 },
+ { STB0899_TSLPL , 0x12 },
+ { STB0899_TSCFGH , 0x0c },
+ { STB0899_TSCFGM , 0x00 },
+ { STB0899_TSCFGL , 0x0c },
+ { STB0899_TSOUT , 0x0d }, /* 0x0d for CAM */
+ { STB0899_RSSYNCDEL , 0x00 },
+ { STB0899_TSINHDELH , 0x02 },
+ { STB0899_TSINHDELM , 0x00 },
+ { STB0899_TSINHDELL , 0x00 },
+ { STB0899_TSLLSTKM , 0x00 },
+ { STB0899_TSLLSTKL , 0x00 },
+ { STB0899_TSULSTKM , 0x00 },
+ { STB0899_TSULSTKL , 0xab },
+ { STB0899_PCKLENUL , 0x00 },
+ { STB0899_PCKLENLL , 0xcc },
+ { STB0899_RSPCKLEN , 0xcc },
+ { STB0899_TSSTATUS , 0x80 },
+ { STB0899_ERRCTRL1 , 0xb6 },
+ { STB0899_ERRCTRL2 , 0x96 },
+ { STB0899_ERRCTRL3 , 0x89 },
+ { STB0899_DMONMSK1 , 0x27 },
+ { STB0899_DMONMSK0 , 0x03 },
+ { STB0899_DEMAPVIT , 0x5c },
+ { STB0899_PLPARM , 0x1f },
+ { STB0899_PDELCTRL , 0x48 },
+ { STB0899_PDELCTRL2 , 0x00 },
+ { STB0899_BBHCTRL1 , 0x00 },
+ { STB0899_BBHCTRL2 , 0x00 },
+ { STB0899_HYSTTHRESH , 0x77 },
+ { STB0899_MATCSTM , 0x00 },
+ { STB0899_MATCSTL , 0x00 },
+ { STB0899_UPLCSTM , 0x00 },
+ { STB0899_UPLCSTL , 0x00 },
+ { STB0899_DFLCSTM , 0x00 },
+ { STB0899_DFLCSTL , 0x00 },
+ { STB0899_SYNCCST , 0x00 },
+ { STB0899_SYNCDCSTM , 0x00 },
+ { STB0899_SYNCDCSTL , 0x00 },
+ { STB0899_ISI_ENTRY , 0x00 },
+ { STB0899_ISI_BIT_EN , 0x00 },
+ { STB0899_MATSTRM , 0x00 },
+ { STB0899_MATSTRL , 0x00 },
+ { STB0899_UPLSTRM , 0x00 },
+ { STB0899_UPLSTRL , 0x00 },
+ { STB0899_DFLSTRM , 0x00 },
+ { STB0899_DFLSTRL , 0x00 },
+ { STB0899_SYNCSTR , 0x00 },
+ { STB0899_SYNCDSTRM , 0x00 },
+ { STB0899_SYNCDSTRL , 0x00 },
+ { STB0899_CFGPDELSTATUS1 , 0x10 },
+ { STB0899_CFGPDELSTATUS2 , 0x00 },
+ { STB0899_BBFERRORM , 0x00 },
+ { STB0899_BBFERRORL , 0x00 },
+ { STB0899_UPKTERRORM , 0x00 },
+ { STB0899_UPKTERRORL , 0x00 },
+ { 0xffff , 0xff },
+};
+
+/* STB0899 demodulator config for the KNC1 and clones */
+static struct stb0899_config knc1_dvbs2_config = {
+ .init_dev = knc1_stb0899_s1_init_1,
+ .init_s2_demod = stb0899_s2_init_2,
+ .init_s1_demod = knc1_stb0899_s1_init_3,
+ .init_s2_fec = stb0899_s2_init_4,
+ .init_tst = stb0899_s1_init_5,
+
+ .postproc = NULL,
+
+ .demod_address = 0x68,
+// .ts_output_mode = STB0899_OUT_PARALLEL, /* types = SERIAL/PARALLEL */
+ .block_sync_mode = STB0899_SYNC_FORCED, /* DSS, SYNC_FORCED/UNSYNCED */
+// .ts_pfbit_toggle = STB0899_MPEG_NORMAL, /* DirecTV, MPEG toggling seq */
+
+ .xtal_freq = 27000000,
+ .inversion = IQ_SWAP_OFF, /* 1 */
+
+ .lo_clk = 76500000,
+ .hi_clk = 90000000,
+
+ .esno_ave = STB0899_DVBS2_ESNO_AVE,
+ .esno_quant = STB0899_DVBS2_ESNO_QUANT,
+ .avframes_coarse = STB0899_DVBS2_AVFRAMES_COARSE,
+ .avframes_fine = STB0899_DVBS2_AVFRAMES_FINE,
+ .miss_threshold = STB0899_DVBS2_MISS_THRESHOLD,
+ .uwp_threshold_acq = STB0899_DVBS2_UWP_THRESHOLD_ACQ,
+ .uwp_threshold_track = STB0899_DVBS2_UWP_THRESHOLD_TRACK,
+ .uwp_threshold_sof = STB0899_DVBS2_UWP_THRESHOLD_SOF,
+ .sof_search_timeout = STB0899_DVBS2_SOF_SEARCH_TIMEOUT,
+
+ .btr_nco_bits = STB0899_DVBS2_BTR_NCO_BITS,
+ .btr_gain_shift_offset = STB0899_DVBS2_BTR_GAIN_SHIFT_OFFSET,
+ .crl_nco_bits = STB0899_DVBS2_CRL_NCO_BITS,
+ .ldpc_max_iter = STB0899_DVBS2_LDPC_MAX_ITER,
+
+ .tuner_get_frequency = tda8261_get_frequency,
+ .tuner_set_frequency = tda8261_set_frequency,
+ .tuner_set_bandwidth = NULL,
+ .tuner_get_bandwidth = tda8261_get_bandwidth,
+ .tuner_set_rfsiggain = NULL
+};
+
+/*
+ * SD1878/SHA tuner config
+ * 1F, Single I/P, Horizontal mount, High Sensitivity
+ */
+static const struct tda8261_config sd1878c_config = {
+// .name = "SD1878/SHA",
+ .addr = 0x60,
+ .step_size = TDA8261_STEP_1000 /* kHz */
};
static u8 read_pwm(struct budget_av *budget_av)
return pwm;
}
-#define SUBID_DVBS_KNC1 0x0010
-#define SUBID_DVBS_KNC1_PLUS 0x0011
-#define SUBID_DVBS_TYPHOON 0x4f56
-#define SUBID_DVBS_CINERGY1200 0x1154
-#define SUBID_DVBS_CYNERGY1200N 0x1155
-
-#define SUBID_DVBS_TV_STAR 0x0014
-#define SUBID_DVBS_TV_STAR_CI 0x0016
-#define SUBID_DVBS_EASYWATCH 0x001e
-#define SUBID_DVBC_KNC1 0x0020
-#define SUBID_DVBC_KNC1_PLUS 0x0021
-#define SUBID_DVBC_CINERGY1200 0x1156
-
-#define SUBID_DVBT_KNC1_PLUS 0x0031
-#define SUBID_DVBT_KNC1 0x0030
-#define SUBID_DVBT_CINERGY1200 0x1157
+#define SUBID_DVBS_KNC1 0x0010
+#define SUBID_DVBS_KNC1_PLUS 0x0011
+#define SUBID_DVBS_TYPHOON 0x4f56
+#define SUBID_DVBS_CINERGY1200 0x1154
+#define SUBID_DVBS_CYNERGY1200N 0x1155
+#define SUBID_DVBS_TV_STAR 0x0014
+#define SUBID_DVBS_TV_STAR_PLUS_X4 0x0015
+#define SUBID_DVBS_TV_STAR_CI 0x0016
+#define SUBID_DVBS2_KNC1 0x0018
+#define SUBID_DVBS2_KNC1_OEM 0x0019
+#define SUBID_DVBS_EASYWATCH_1 0x001a
+#define SUBID_DVBS_EASYWATCH_2 0x001b
+#define SUBID_DVBS2_EASYWATCH 0x001d
+#define SUBID_DVBS_EASYWATCH 0x001e
+
+#define SUBID_DVBC_EASYWATCH 0x002a
+#define SUBID_DVBC_EASYWATCH_MK3 0x002c
+#define SUBID_DVBC_KNC1 0x0020
+#define SUBID_DVBC_KNC1_PLUS 0x0021
+#define SUBID_DVBC_KNC1_MK3 0x0022
+#define SUBID_DVBC_KNC1_PLUS_MK3 0x0023
+#define SUBID_DVBC_CINERGY1200 0x1156
+#define SUBID_DVBC_CINERGY1200_MK3 0x1176
+
+#define SUBID_DVBT_EASYWATCH 0x003a
+#define SUBID_DVBT_KNC1_PLUS 0x0031
+#define SUBID_DVBT_KNC1 0x0030
+#define SUBID_DVBT_CINERGY1200 0x1157
static void frontend_init(struct budget_av *budget_av)
{
/* Enable / PowerON Frontend */
saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO);
+ /* Wait for PowerON */
+ msleep(100);
+
/* additional setup necessary for the PLUS cards */
switch (saa->pci->subsystem_device) {
case SUBID_DVBS_KNC1_PLUS:
case SUBID_DVBC_KNC1_PLUS:
case SUBID_DVBT_KNC1_PLUS:
+ case SUBID_DVBC_EASYWATCH:
+ case SUBID_DVBC_KNC1_PLUS_MK3:
+ case SUBID_DVBS2_KNC1:
+ case SUBID_DVBS2_KNC1_OEM:
+ case SUBID_DVBS2_EASYWATCH:
saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTHI);
break;
}
switch (saa->pci->subsystem_device) {
case SUBID_DVBS_KNC1:
+ /*
+ * maybe that setting is needed for other dvb-s cards as well,
+ * but so far it has been only confirmed for this type
+ */
+ budget_av->reinitialise_demod = 1;
+ /* fall through */
+ case SUBID_DVBS_KNC1_PLUS:
+ case SUBID_DVBS_EASYWATCH_1:
if (saa->pci->subsystem_vendor == 0x1894) {
- fe = stv0299_attach(&cinergy_1200s_1894_0010_config,
+ fe = dvb_attach(stv0299_attach, &cinergy_1200s_1894_0010_config,
&budget_av->budget.i2c_adap);
+ if (fe) {
+ dvb_attach(tua6100_attach, fe, 0x60, &budget_av->budget.i2c_adap);
+ }
} else {
- fe = stv0299_attach(&typhoon_config,
+ fe = dvb_attach(stv0299_attach, &typhoon_config,
&budget_av->budget.i2c_adap);
+ if (fe) {
+ fe->ops.tuner_ops.set_params = philips_su1278_ty_ci_tuner_set_params;
+ }
}
break;
case SUBID_DVBS_TV_STAR:
+ case SUBID_DVBS_TV_STAR_PLUS_X4:
case SUBID_DVBS_TV_STAR_CI:
case SUBID_DVBS_CYNERGY1200N:
case SUBID_DVBS_EASYWATCH:
- fe = stv0299_attach(&philips_sd1878_config,
+ case SUBID_DVBS_EASYWATCH_2:
+ fe = dvb_attach(stv0299_attach, &philips_sd1878_config,
&budget_av->budget.i2c_adap);
+ if (fe) {
+ dvb_attach(dvb_pll_attach, fe, 0x60,
+ &budget_av->budget.i2c_adap,
+ DVB_PLL_PHILIPS_SD1878_TDA8261);
+ }
break;
- case SUBID_DVBS_KNC1_PLUS:
case SUBID_DVBS_TYPHOON:
- fe = stv0299_attach(&typhoon_config,
+ fe = dvb_attach(stv0299_attach, &typhoon_config,
&budget_av->budget.i2c_adap);
+ if (fe) {
+ fe->ops.tuner_ops.set_params = philips_su1278_ty_ci_tuner_set_params;
+ }
break;
+ case SUBID_DVBS2_KNC1:
+ case SUBID_DVBS2_KNC1_OEM:
+ case SUBID_DVBS2_EASYWATCH:
+ budget_av->reinitialise_demod = 1;
+ if ((fe = dvb_attach(stb0899_attach, &knc1_dvbs2_config, &budget_av->budget.i2c_adap)))
+ dvb_attach(tda8261_attach, fe, &sd1878c_config, &budget_av->budget.i2c_adap);
+ break;
case SUBID_DVBS_CINERGY1200:
- fe = stv0299_attach(&cinergy_1200s_config,
+ fe = dvb_attach(stv0299_attach, &cinergy_1200s_config,
&budget_av->budget.i2c_adap);
+ if (fe) {
+ fe->ops.tuner_ops.set_params = philips_su1278_ty_ci_tuner_set_params;
+ }
break;
case SUBID_DVBC_KNC1:
case SUBID_DVBC_KNC1_PLUS:
- fe = tda10021_attach(&philips_cu1216_config,
+ case SUBID_DVBC_CINERGY1200:
+ case SUBID_DVBC_EASYWATCH:
+ budget_av->reinitialise_demod = 1;
+ budget_av->budget.dev->i2c_bitrate = SAA7146_I2C_BUS_BIT_RATE_240;
+ fe = dvb_attach(tda10021_attach, &philips_cu1216_config,
&budget_av->budget.i2c_adap,
read_pwm(budget_av));
+ if (fe == NULL)
+ fe = dvb_attach(tda10021_attach, &philips_cu1216_config_altaddress,
+ &budget_av->budget.i2c_adap,
+ read_pwm(budget_av));
+ if (fe) {
+ fe->ops.tuner_ops.set_params = philips_cu1216_tuner_set_params;
+ }
break;
- case SUBID_DVBT_KNC1:
- case SUBID_DVBT_KNC1_PLUS:
- fe = tda10046_attach(&philips_tu1216_config,
- &budget_av->budget.i2c_adap);
- break;
-
- case SUBID_DVBC_CINERGY1200:
- fe = tda10021_attach(&philips_cu1216_config,
- &budget_av->budget.i2c_adap,
- read_pwm(budget_av));
+ case SUBID_DVBC_EASYWATCH_MK3:
+ case SUBID_DVBC_CINERGY1200_MK3:
+ case SUBID_DVBC_KNC1_MK3:
+ case SUBID_DVBC_KNC1_PLUS_MK3:
+ budget_av->reinitialise_demod = 1;
+ budget_av->budget.dev->i2c_bitrate = SAA7146_I2C_BUS_BIT_RATE_240;
+ fe = dvb_attach(tda10023_attach,
+ &philips_cu1216_tda10023_config,
+ &budget_av->budget.i2c_adap,
+ read_pwm(budget_av));
+ if (fe) {
+ fe->ops.tuner_ops.set_params = philips_cu1216_tuner_set_params;
+ }
break;
+ case SUBID_DVBT_EASYWATCH:
+ case SUBID_DVBT_KNC1:
+ case SUBID_DVBT_KNC1_PLUS:
case SUBID_DVBT_CINERGY1200:
- fe = tda10046_attach(&philips_tu1216_config,
+ budget_av->reinitialise_demod = 1;
+ fe = dvb_attach(tda10046_attach, &philips_tu1216_config,
&budget_av->budget.i2c_adap);
+ if (fe) {
+ fe->ops.tuner_ops.init = philips_tu1216_tuner_init;
+ fe->ops.tuner_ops.set_params = philips_tu1216_tuner_set_params;
+ }
break;
}
if (fe == NULL) {
printk(KERN_ERR "budget-av: A frontend driver was not found "
- "for device %04x/%04x subsystem %04x/%04x\n",
+ "for device [%04x:%04x] subsystem [%04x:%04x]\n",
saa->pci->vendor,
saa->pci->device,
saa->pci->subsystem_vendor,
if (dvb_register_frontend(&budget_av->budget.dvb_adapter,
budget_av->budget.dvb_frontend)) {
printk(KERN_ERR "budget-av: Frontend registration failed!\n");
- if (budget_av->budget.dvb_frontend->ops->release)
- budget_av->budget.dvb_frontend->ops->release(budget_av->budget.dvb_frontend);
+ dvb_frontend_detach(budget_av->budget.dvb_frontend);
budget_av->budget.dvb_frontend = NULL;
}
}
msleep(200);
saa7146_unregister_device(&budget_av->vd, dev);
+
+ saa7146_vv_release(dev);
}
if (budget_av->budget.ci_present)
ciintf_deinit(budget_av);
- if (budget_av->budget.dvb_frontend != NULL)
+ if (budget_av->budget.dvb_frontend != NULL) {
dvb_unregister_frontend(budget_av->budget.dvb_frontend);
+ dvb_frontend_detach(budget_av->budget.dvb_frontend);
+ }
err = ttpci_budget_deinit(&budget_av->budget);
kfree(budget_av);
dev->ext_priv = budget_av;
- if ((err = ttpci_budget_init(&budget_av->budget, dev, info, THIS_MODULE))) {
+ err = ttpci_budget_init(&budget_av->budget, dev, info, THIS_MODULE,
+ adapter_nr);
+ if (err) {
kfree(budget_av);
return err;
}
if ((err = saa7146_register_device(&budget_av->vd, dev, "knc1", VFL_TYPE_GRABBER))) {
/* fixme: proper cleanup here */
ERR(("cannot register capture v4l2 device.\n"));
+ saa7146_vv_release(dev);
return err;
}
budget_av->budget.dvb_adapter.priv = budget_av;
frontend_init(budget_av);
+ ciintf_init(budget_av);
- if (!budget_av->has_saa7113) {
- ciintf_init(budget_av);
- }
+ ttpci_budget_init_hooks(&budget_av->budget);
return 0;
}
.capabilities = 0, // perhaps later: V4L2_CAP_VBI_CAPTURE, but that need tweaking with the saa7113
.flags = 0,
.stds = &standard[0],
- .num_stds = sizeof(standard) / sizeof(struct saa7146_standard),
+ .num_stds = ARRAY_SIZE(standard),
.ioctls = &ioctls[0],
.ioctl = av_ioctl,
};
static struct saa7146_extension budget_extension;
MAKE_BUDGET_INFO(knc1s, "KNC1 DVB-S", BUDGET_KNC1S);
+MAKE_BUDGET_INFO(knc1s2,"KNC1 DVB-S2", BUDGET_KNC1S2);
+MAKE_BUDGET_INFO(sates2,"Satelco EasyWatch DVB-S2", BUDGET_KNC1S2);
MAKE_BUDGET_INFO(knc1c, "KNC1 DVB-C", BUDGET_KNC1C);
MAKE_BUDGET_INFO(knc1t, "KNC1 DVB-T", BUDGET_KNC1T);
MAKE_BUDGET_INFO(kncxs, "KNC TV STAR DVB-S", BUDGET_TVSTAR);
MAKE_BUDGET_INFO(satewpls, "Satelco EasyWatch DVB-S light", BUDGET_TVSTAR);
+MAKE_BUDGET_INFO(satewpls1, "Satelco EasyWatch DVB-S light", BUDGET_KNC1S);
+MAKE_BUDGET_INFO(satewps, "Satelco EasyWatch DVB-S", BUDGET_KNC1S);
+MAKE_BUDGET_INFO(satewplc, "Satelco EasyWatch DVB-C", BUDGET_KNC1CP);
+MAKE_BUDGET_INFO(satewcmk3, "Satelco EasyWatch DVB-C MK3", BUDGET_KNC1C_MK3);
+MAKE_BUDGET_INFO(satewt, "Satelco EasyWatch DVB-T", BUDGET_KNC1T);
MAKE_BUDGET_INFO(knc1sp, "KNC1 DVB-S Plus", BUDGET_KNC1SP);
+MAKE_BUDGET_INFO(knc1spx4, "KNC1 DVB-S Plus X4", BUDGET_KNC1SP);
MAKE_BUDGET_INFO(knc1cp, "KNC1 DVB-C Plus", BUDGET_KNC1CP);
+MAKE_BUDGET_INFO(knc1cmk3, "KNC1 DVB-C MK3", BUDGET_KNC1C_MK3);
+MAKE_BUDGET_INFO(knc1cpmk3, "KNC1 DVB-C Plus MK3", BUDGET_KNC1CP_MK3);
MAKE_BUDGET_INFO(knc1tp, "KNC1 DVB-T Plus", BUDGET_KNC1TP);
MAKE_BUDGET_INFO(cin1200s, "TerraTec Cinergy 1200 DVB-S", BUDGET_CIN1200S);
MAKE_BUDGET_INFO(cin1200sn, "TerraTec Cinergy 1200 DVB-S", BUDGET_CIN1200S);
MAKE_BUDGET_INFO(cin1200c, "Terratec Cinergy 1200 DVB-C", BUDGET_CIN1200C);
+MAKE_BUDGET_INFO(cin1200cmk3, "Terratec Cinergy 1200 DVB-C MK3", BUDGET_CIN1200C_MK3);
MAKE_BUDGET_INFO(cin1200t, "Terratec Cinergy 1200 DVB-T", BUDGET_CIN1200T);
static struct pci_device_id pci_tbl[] = {
MAKE_EXTENSION_PCI(knc1s, 0x1131, 0x0010),
MAKE_EXTENSION_PCI(knc1s, 0x1894, 0x0010),
MAKE_EXTENSION_PCI(knc1sp, 0x1131, 0x0011),
+ MAKE_EXTENSION_PCI(knc1sp, 0x1894, 0x0011),
MAKE_EXTENSION_PCI(kncxs, 0x1894, 0x0014),
+ MAKE_EXTENSION_PCI(knc1spx4, 0x1894, 0x0015),
MAKE_EXTENSION_PCI(kncxs, 0x1894, 0x0016),
+ MAKE_EXTENSION_PCI(knc1s2, 0x1894, 0x0018),
+ MAKE_EXTENSION_PCI(knc1s2, 0x1894, 0x0019),
+ MAKE_EXTENSION_PCI(sates2, 0x1894, 0x001d),
MAKE_EXTENSION_PCI(satewpls, 0x1894, 0x001e),
+ MAKE_EXTENSION_PCI(satewpls1, 0x1894, 0x001a),
+ MAKE_EXTENSION_PCI(satewps, 0x1894, 0x001b),
+ MAKE_EXTENSION_PCI(satewplc, 0x1894, 0x002a),
+ MAKE_EXTENSION_PCI(satewcmk3, 0x1894, 0x002c),
+ MAKE_EXTENSION_PCI(satewt, 0x1894, 0x003a),
MAKE_EXTENSION_PCI(knc1c, 0x1894, 0x0020),
MAKE_EXTENSION_PCI(knc1cp, 0x1894, 0x0021),
+ MAKE_EXTENSION_PCI(knc1cmk3, 0x1894, 0x0022),
+ MAKE_EXTENSION_PCI(knc1cpmk3, 0x1894, 0x0023),
MAKE_EXTENSION_PCI(knc1t, 0x1894, 0x0030),
MAKE_EXTENSION_PCI(knc1tp, 0x1894, 0x0031),
MAKE_EXTENSION_PCI(cin1200s, 0x153b, 0x1154),
MAKE_EXTENSION_PCI(cin1200sn, 0x153b, 0x1155),
MAKE_EXTENSION_PCI(cin1200c, 0x153b, 0x1156),
+ MAKE_EXTENSION_PCI(cin1200cmk3, 0x153b, 0x1176),
MAKE_EXTENSION_PCI(cin1200t, 0x153b, 0x1157),
{
.vendor = 0,
static struct saa7146_extension budget_extension = {
.name = "budget_av",
- .flags = SAA7146_I2C_SHORT_DELAY,
+ .flags = SAA7146_USE_I2C_IRQ,
.pci_tbl = pci_tbl,
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff