#include "budget.h"
#include "stv0299.h"
-#include "tda10021.h"
+#include "tda1002x.h"
#include "tda1004x.h"
+#include "tua6100.h"
#include "dvb-pll.h"
#include <media/saa7146_vv.h>
#include <linux/module.h>
int slot_status;
struct dvb_ca_en50221 ca;
u8 reinitialise_demod:1;
- u8 tda10021_poclkp:1;
- u8 tda10021_ts_enabled;
- int (*tda10021_set_frontend)(struct dvb_frontend *fe, struct dvb_frontend_parameters *p);
};
static int ciintf_slot_shutdown(struct dvb_ca_en50221 *ca, int slot);
udelay(1);
result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 3, 1, 0, 0);
- if ((result == -ETIMEDOUT) || ((result == 0xff) && ((address & 3) < 2))) {
+ if (result == -ETIMEDOUT) {
ciintf_slot_shutdown(ca, slot);
printk(KERN_INFO "budget-av: cam ejected 3\n");
return -ETIMEDOUT;
if (budget_av->reinitialise_demod)
dvb_frontend_reinitialise(budget_av->budget.dvb_frontend);
- /* set tda10021 back to original clock configuration on reset */
- if (budget_av->tda10021_poclkp) {
- tda10021_write_byte(budget_av->budget.dvb_frontend, 0x12, 0xa0);
- budget_av->tda10021_ts_enabled = 0;
- }
-
return 0;
}
ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB);
budget_av->slot_status = SLOTSTATUS_NONE;
- /* set tda10021 back to original clock configuration when cam removed */
- if (budget_av->tda10021_poclkp) {
- tda10021_write_byte(budget_av->budget.dvb_frontend, 0x12, 0xa0);
- budget_av->tda10021_ts_enabled = 0;
- }
return 0;
}
ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTA);
- /* tda10021 seems to need a different TS clock config when data is routed to the CAM */
- if (budget_av->tda10021_poclkp) {
- tda10021_write_byte(budget_av->budget.dvb_frontend, 0x12, 0xa1);
- budget_av->tda10021_ts_enabled = 1;
- }
-
return 0;
}
saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO);
/* Enable DEBI pins */
- saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16) | 0x800);
+ saa7146_write(saa, MC1, MASK_27 | MASK_11);
/* register CI interface */
budget_av->ca.owner = THIS_MODULE;
return 0;
error:
- saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16));
+ saa7146_write(saa, MC1, MASK_27);
return result;
}
dvb_ca_en50221_release(&budget_av->ca);
/* disable DEBI pins */
- saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16));
+ saa7146_write(saa, MC1, MASK_27);
}
return 0;
}
-#define MIN2(a,b) ((a) < (b) ? (a) : (b))
-#define MIN3(a,b,c) MIN2(MIN2(a,b),c)
-
-static int philips_su1278sh2_tua6100_tuner_set_params(struct dvb_frontend *fe,
- struct dvb_frontend_parameters *params)
-{
- u8 reg0 [2] = { 0x00, 0x00 };
- u8 reg1 [4] = { 0x01, 0x00, 0x00, 0x00 };
- u8 reg2 [3] = { 0x02, 0x00, 0x00 };
- int _fband;
- int first_ZF;
- int R, A, N, P, M;
- struct i2c_msg msg = {.addr = 0x60,.flags = 0,.buf = NULL,.len = 0 };
- int freq = params->frequency;
- struct budget *budget = (struct budget *) fe->dvb->priv;
-
- first_ZF = (freq) / 1000;
-
- if (abs(MIN2(abs(first_ZF-1190),abs(first_ZF-1790))) <
- abs(MIN3(abs(first_ZF-1202),abs(first_ZF-1542),abs(first_ZF-1890))))
- _fband = 2;
- else
- _fband = 3;
-
- if (_fband == 2) {
- if (((first_ZF >= 950) && (first_ZF < 1350)) ||
- ((first_ZF >= 1430) && (first_ZF < 1950)))
- reg0[1] = 0x07;
- else if (((first_ZF >= 1350) && (first_ZF < 1430)) ||
- ((first_ZF >= 1950) && (first_ZF < 2150)))
- reg0[1] = 0x0B;
- }
-
- if(_fband == 3) {
- if (((first_ZF >= 950) && (first_ZF < 1350)) ||
- ((first_ZF >= 1455) && (first_ZF < 1950)))
- reg0[1] = 0x07;
- else if (((first_ZF >= 1350) && (first_ZF < 1420)) ||
- ((first_ZF >= 1950) && (first_ZF < 2150)))
- reg0[1] = 0x0B;
- else if ((first_ZF >= 1420) && (first_ZF < 1455))
- reg0[1] = 0x0F;
- }
-
- if (first_ZF > 1525)
- reg1[1] |= 0x80;
- else
- reg1[1] &= 0x7F;
-
- if (_fband == 2) {
- if (first_ZF > 1430) { /* 1430MHZ */
- reg1[1] &= 0xCF; /* N2 */
- reg2[1] &= 0xCF; /* R2 */
- reg2[1] |= 0x10;
- } else {
- reg1[1] &= 0xCF; /* N2 */
- reg1[1] |= 0x20;
- reg2[1] &= 0xCF; /* R2 */
- reg2[1] |= 0x10;
- }
- }
-
- if (_fband == 3) {
- if ((first_ZF >= 1455) &&
- (first_ZF < 1630)) {
- reg1[1] &= 0xCF; /* N2 */
- reg1[1] |= 0x20;
- reg2[1] &= 0xCF; /* R2 */
- } else {
- if (first_ZF < 1455) {
- reg1[1] &= 0xCF; /* N2 */
- reg1[1] |= 0x20;
- reg2[1] &= 0xCF; /* R2 */
- reg2[1] |= 0x10;
- } else {
- if (first_ZF >= 1630) {
- reg1[1] &= 0xCF; /* N2 */
- reg2[1] &= 0xCF; /* R2 */
- reg2[1] |= 0x10;
- }
- }
- }
- }
-
- /* set ports, enable P0 for symbol rates > 4Ms/s */
- if (params->u.qpsk.symbol_rate >= 4000000)
- reg1[1] |= 0x0c;
- else
- reg1[1] |= 0x04;
-
- reg2[1] |= 0x0c;
-
- R = 64;
- A = 64;
- P = 64; //32
-
- M = (freq * R) / 4; /* in Mhz */
- N = (M - A * 1000) / (P * 1000);
-
- reg1[1] |= (N >> 9) & 0x03;
- reg1[2] = (N >> 1) & 0xff;
- reg1[3] = (N << 7) & 0x80;
-
- reg2[1] |= (R >> 8) & 0x03;
- reg2[2] = R & 0xFF; /* R */
-
- reg1[3] |= A & 0x7f; /* A */
-
- if (P == 64)
- reg1[1] |= 0x40; /* Prescaler 64/65 */
-
- reg0[1] |= 0x03;
-
- /* already enabled - do not reenable i2c repeater or TX fails */
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
- msg.buf = reg0;
- msg.len = sizeof(reg0);
- if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1)
- return -EIO;
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
- msg.buf = reg1;
- msg.len = sizeof(reg1);
- if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1)
- return -EIO;
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
- msg.buf = reg2;
- msg.len = sizeof(reg2);
- if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1)
- return -EIO;
-
- return 0;
-}
-
static u8 typhoon_cinergy1200s_inittab[] = {
0x01, 0x15,
0x02, 0x30,
.mclk = 88000000UL,
.invert = 0,
.skip_reinit = 0,
- .lock_output = STV0229_LOCKOUTPUT_1,
+ .lock_output = STV0299_LOCKOUTPUT_1,
.volt13_op0_op1 = STV0299_VOLT13_OP0,
.min_delay_ms = 100,
.set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate,
.mclk = 88000000UL,
.invert = 0,
.skip_reinit = 0,
- .lock_output = STV0229_LOCKOUTPUT_0,
+ .lock_output = STV0299_LOCKOUTPUT_0,
.volt13_op0_op1 = STV0299_VOLT13_OP0,
.min_delay_ms = 100,
.set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate,
.mclk = 88000000UL,
.invert = 1,
.skip_reinit = 0,
- .lock_output = STV0229_LOCKOUTPUT_1,
+ .lock_output = STV0299_LOCKOUTPUT_1,
.volt13_op0_op1 = STV0299_VOLT13_OP0,
.min_delay_ms = 100,
.set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate,
static int philips_cu1216_tuner_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
{
struct budget *budget = (struct budget *) fe->dvb->priv;
- u8 buf[4];
+ u8 buf[6];
struct i2c_msg msg = {.addr = 0x60,.flags = 0,.buf = buf,.len = sizeof(buf) };
+ int i;
+#define CU1216_IF 36125000
#define TUNER_MUL 62500
- u32 div = (params->frequency + 36125000 + TUNER_MUL / 2) / TUNER_MUL;
+ u32 div = (params->frequency + CU1216_IF + TUNER_MUL / 2) / TUNER_MUL;
buf[0] = (div >> 8) & 0x7f;
buf[1] = div & 0xff;
- buf[2] = 0x86;
+ buf[2] = 0xce;
buf[3] = (params->frequency < 150000000 ? 0x01 :
params->frequency < 445000000 ? 0x02 : 0x04);
+ buf[4] = 0xde;
+ buf[5] = 0x20;
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1)
return -EIO;
+
+ /* wait for the pll lock */
+ msg.flags = I2C_M_RD;
+ msg.len = 1;
+ for (i = 0; i < 20; i++) {
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+ if (i2c_transfer(&budget->i2c_adap, &msg, 1) == 1 && (buf[0] & 0x40))
+ break;
+ msleep(10);
+ }
+
+ /* switch the charge pump to the lower current */
+ msg.flags = 0;
+ msg.len = 2;
+ msg.buf = &buf[2];
+ buf[2] &= ~0x40;
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+ if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1)
+ return -EIO;
+
return 0;
}
-static struct tda10021_config philips_cu1216_config = {
+static struct tda1002x_config philips_cu1216_config = {
.demod_address = 0x0c,
+ .invert = 1,
};
+static struct tda1002x_config philips_cu1216_config_altaddress = {
+ .demod_address = 0x0d,
+ .invert = 0,
+};
-
+static struct tda10023_config philips_cu1216_tda10023_config = {
+ .demod_address = 0x0c,
+ .invert = 1,
+};
static int philips_tu1216_tuner_init(struct dvb_frontend *fe)
{
0xff, 0xff
};
-static int philips_sd1878_tda8261_tuner_set_params(struct dvb_frontend *fe,
- struct dvb_frontend_parameters *params)
-{
- u8 buf[4];
- int rc;
- struct i2c_msg tuner_msg = {.addr=0x60,.flags=0,.buf=buf,.len=sizeof(buf)};
- struct budget *budget = (struct budget *) fe->dvb->priv;
-
- if((params->frequency < 950000) || (params->frequency > 2150000))
- return -EINVAL;
-
- rc=dvb_pll_configure(&dvb_pll_philips_sd1878_tda8261, buf,
- params->frequency, 0);
- if(rc < 0) return rc;
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
- if(i2c_transfer(&budget->i2c_adap, &tuner_msg, 1) != 1)
- return -EIO;
-
- return 0;
-}
-
static int philips_sd1878_ci_set_symbol_rate(struct dvb_frontend *fe,
u32 srate, u32 ratio)
{
.mclk = 88000000UL,
.invert = 0,
.skip_reinit = 0,
- .lock_output = STV0229_LOCKOUTPUT_1,
+ .lock_output = STV0299_LOCKOUTPUT_1,
.volt13_op0_op1 = STV0299_VOLT13_OP0,
.min_delay_ms = 100,
.set_symbol_rate = philips_sd1878_ci_set_symbol_rate,
return pwm;
}
-#define SUBID_DVBS_KNC1 0x0010
-#define SUBID_DVBS_KNC1_PLUS 0x0011
-#define SUBID_DVBS_TYPHOON 0x4f56
-#define SUBID_DVBS_CINERGY1200 0x1154
-#define SUBID_DVBS_CYNERGY1200N 0x1155
-
-#define SUBID_DVBS_TV_STAR 0x0014
-#define SUBID_DVBS_TV_STAR_CI 0x0016
-#define SUBID_DVBS_EASYWATCH_1 0x001a
-#define SUBID_DVBS_EASYWATCH 0x001e
-#define SUBID_DVBC_KNC1 0x0020
-#define SUBID_DVBC_KNC1_PLUS 0x0021
-#define SUBID_DVBC_CINERGY1200 0x1156
-
-#define SUBID_DVBT_KNC1_PLUS 0x0031
-#define SUBID_DVBT_KNC1 0x0030
-#define SUBID_DVBT_CINERGY1200 0x1157
-
-
-static int tda10021_set_frontend(struct dvb_frontend *fe,
- struct dvb_frontend_parameters *p)
-{
- struct budget_av* budget_av = fe->dvb->priv;
- int result;
-
- result = budget_av->tda10021_set_frontend(fe, p);
- if (budget_av->tda10021_ts_enabled) {
- tda10021_write_byte(budget_av->budget.dvb_frontend, 0x12, 0xa1);
- } else {
- tda10021_write_byte(budget_av->budget.dvb_frontend, 0x12, 0xa0);
- }
-
- return result;
-}
+#define SUBID_DVBS_KNC1 0x0010
+#define SUBID_DVBS_KNC1_PLUS 0x0011
+#define SUBID_DVBS_TYPHOON 0x4f56
+#define SUBID_DVBS_CINERGY1200 0x1154
+#define SUBID_DVBS_CYNERGY1200N 0x1155
+#define SUBID_DVBS_TV_STAR 0x0014
+#define SUBID_DVBS_TV_STAR_PLUS_X4 0x0015
+#define SUBID_DVBS_TV_STAR_CI 0x0016
+#define SUBID_DVBS_EASYWATCH_1 0x001a
+#define SUBID_DVBS_EASYWATCH_2 0x001b
+#define SUBID_DVBS_EASYWATCH 0x001e
+
+#define SUBID_DVBC_EASYWATCH 0x002a
+#define SUBID_DVBC_EASYWATCH_MK3 0x002c
+#define SUBID_DVBC_KNC1 0x0020
+#define SUBID_DVBC_KNC1_PLUS 0x0021
+#define SUBID_DVBC_KNC1_MK3 0x0022
+#define SUBID_DVBC_KNC1_PLUS_MK3 0x0023
+#define SUBID_DVBC_CINERGY1200 0x1156
+#define SUBID_DVBC_CINERGY1200_MK3 0x1176
+
+#define SUBID_DVBT_EASYWATCH 0x003a
+#define SUBID_DVBT_KNC1_PLUS 0x0031
+#define SUBID_DVBT_KNC1 0x0030
+#define SUBID_DVBT_CINERGY1200 0x1157
static void frontend_init(struct budget_av *budget_av)
{
/* Enable / PowerON Frontend */
saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO);
+ /* Wait for PowerON */
+ msleep(100);
+
/* additional setup necessary for the PLUS cards */
switch (saa->pci->subsystem_device) {
case SUBID_DVBS_KNC1_PLUS:
case SUBID_DVBC_KNC1_PLUS:
case SUBID_DVBT_KNC1_PLUS:
+ case SUBID_DVBC_EASYWATCH:
+ case SUBID_DVBC_KNC1_PLUS_MK3:
saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTHI);
break;
}
switch (saa->pci->subsystem_device) {
case SUBID_DVBS_KNC1:
+ /*
+ * maybe that setting is needed for other dvb-s cards as well,
+ * but so far it has been only confirmed for this type
+ */
+ budget_av->reinitialise_demod = 1;
+ /* fall through */
+ case SUBID_DVBS_KNC1_PLUS:
case SUBID_DVBS_EASYWATCH_1:
if (saa->pci->subsystem_vendor == 0x1894) {
- fe = stv0299_attach(&cinergy_1200s_1894_0010_config,
+ fe = dvb_attach(stv0299_attach, &cinergy_1200s_1894_0010_config,
&budget_av->budget.i2c_adap);
if (fe) {
- fe->ops.tuner_ops.set_params = philips_su1278sh2_tua6100_tuner_set_params;
+ dvb_attach(tua6100_attach, fe, 0x60, &budget_av->budget.i2c_adap);
}
} else {
- fe = stv0299_attach(&typhoon_config,
+ fe = dvb_attach(stv0299_attach, &typhoon_config,
&budget_av->budget.i2c_adap);
if (fe) {
fe->ops.tuner_ops.set_params = philips_su1278_ty_ci_tuner_set_params;
break;
case SUBID_DVBS_TV_STAR:
+ case SUBID_DVBS_TV_STAR_PLUS_X4:
case SUBID_DVBS_TV_STAR_CI:
case SUBID_DVBS_CYNERGY1200N:
case SUBID_DVBS_EASYWATCH:
- fe = stv0299_attach(&philips_sd1878_config,
+ case SUBID_DVBS_EASYWATCH_2:
+ fe = dvb_attach(stv0299_attach, &philips_sd1878_config,
&budget_av->budget.i2c_adap);
if (fe) {
- fe->ops.tuner_ops.set_params = philips_sd1878_tda8261_tuner_set_params;
+ dvb_attach(dvb_pll_attach, fe, 0x60,
+ &budget_av->budget.i2c_adap,
+ DVB_PLL_PHILIPS_SD1878_TDA8261);
}
break;
- case SUBID_DVBS_KNC1_PLUS:
case SUBID_DVBS_TYPHOON:
- fe = stv0299_attach(&typhoon_config,
+ fe = dvb_attach(stv0299_attach, &typhoon_config,
&budget_av->budget.i2c_adap);
if (fe) {
fe->ops.tuner_ops.set_params = philips_su1278_ty_ci_tuner_set_params;
break;
case SUBID_DVBS_CINERGY1200:
- fe = stv0299_attach(&cinergy_1200s_config,
+ fe = dvb_attach(stv0299_attach, &cinergy_1200s_config,
&budget_av->budget.i2c_adap);
if (fe) {
fe->ops.tuner_ops.set_params = philips_su1278_ty_ci_tuner_set_params;
case SUBID_DVBC_KNC1:
case SUBID_DVBC_KNC1_PLUS:
case SUBID_DVBC_CINERGY1200:
+ case SUBID_DVBC_EASYWATCH:
budget_av->reinitialise_demod = 1;
- fe = tda10021_attach(&philips_cu1216_config,
+ budget_av->budget.dev->i2c_bitrate = SAA7146_I2C_BUS_BIT_RATE_240;
+ fe = dvb_attach(tda10021_attach, &philips_cu1216_config,
&budget_av->budget.i2c_adap,
read_pwm(budget_av));
+ if (fe == NULL)
+ fe = dvb_attach(tda10021_attach, &philips_cu1216_config_altaddress,
+ &budget_av->budget.i2c_adap,
+ read_pwm(budget_av));
if (fe) {
- budget_av->tda10021_poclkp = 1;
- budget_av->tda10021_set_frontend = fe->ops.set_frontend;
- fe->ops.set_frontend = tda10021_set_frontend;
fe->ops.tuner_ops.set_params = philips_cu1216_tuner_set_params;
}
break;
+ case SUBID_DVBC_EASYWATCH_MK3:
+ case SUBID_DVBC_CINERGY1200_MK3:
+ case SUBID_DVBC_KNC1_MK3:
+ case SUBID_DVBC_KNC1_PLUS_MK3:
+ budget_av->reinitialise_demod = 1;
+ budget_av->budget.dev->i2c_bitrate = SAA7146_I2C_BUS_BIT_RATE_240;
+ fe = dvb_attach(tda10023_attach,
+ &philips_cu1216_tda10023_config,
+ &budget_av->budget.i2c_adap,
+ read_pwm(budget_av));
+ if (fe) {
+ fe->ops.tuner_ops.set_params = philips_cu1216_tuner_set_params;
+ }
+ break;
+
+ case SUBID_DVBT_EASYWATCH:
case SUBID_DVBT_KNC1:
case SUBID_DVBT_KNC1_PLUS:
case SUBID_DVBT_CINERGY1200:
budget_av->reinitialise_demod = 1;
- fe = tda10046_attach(&philips_tu1216_config,
+ fe = dvb_attach(tda10046_attach, &philips_tu1216_config,
&budget_av->budget.i2c_adap);
if (fe) {
fe->ops.tuner_ops.init = philips_tu1216_tuner_init;
if (fe == NULL) {
printk(KERN_ERR "budget-av: A frontend driver was not found "
- "for device %04x/%04x subsystem %04x/%04x\n",
+ "for device [%04x:%04x] subsystem [%04x:%04x]\n",
saa->pci->vendor,
saa->pci->device,
saa->pci->subsystem_vendor,
if (dvb_register_frontend(&budget_av->budget.dvb_adapter,
budget_av->budget.dvb_frontend)) {
printk(KERN_ERR "budget-av: Frontend registration failed!\n");
- if (budget_av->budget.dvb_frontend->ops.release)
- budget_av->budget.dvb_frontend->ops.release(budget_av->budget.dvb_frontend);
+ dvb_frontend_detach(budget_av->budget.dvb_frontend);
budget_av->budget.dvb_frontend = NULL;
}
}
msleep(200);
saa7146_unregister_device(&budget_av->vd, dev);
+
+ saa7146_vv_release(dev);
}
if (budget_av->budget.ci_present)
ciintf_deinit(budget_av);
- if (budget_av->budget.dvb_frontend != NULL)
+ if (budget_av->budget.dvb_frontend != NULL) {
dvb_unregister_frontend(budget_av->budget.dvb_frontend);
+ dvb_frontend_detach(budget_av->budget.dvb_frontend);
+ }
err = ttpci_budget_deinit(&budget_av->budget);
kfree(budget_av);
if ((err = saa7146_register_device(&budget_av->vd, dev, "knc1", VFL_TYPE_GRABBER))) {
/* fixme: proper cleanup here */
ERR(("cannot register capture v4l2 device.\n"));
+ saa7146_vv_release(dev);
return err;
}
budget_av->budget.dvb_adapter.priv = budget_av;
frontend_init(budget_av);
+ ciintf_init(budget_av);
- if (!budget_av->has_saa7113) {
- ciintf_init(budget_av);
- }
+ ttpci_budget_init_hooks(&budget_av->budget);
return 0;
}
.capabilities = 0, // perhaps later: V4L2_CAP_VBI_CAPTURE, but that need tweaking with the saa7113
.flags = 0,
.stds = &standard[0],
- .num_stds = sizeof(standard) / sizeof(struct saa7146_standard),
+ .num_stds = ARRAY_SIZE(standard),
.ioctls = &ioctls[0],
.ioctl = av_ioctl,
};
MAKE_BUDGET_INFO(kncxs, "KNC TV STAR DVB-S", BUDGET_TVSTAR);
MAKE_BUDGET_INFO(satewpls, "Satelco EasyWatch DVB-S light", BUDGET_TVSTAR);
MAKE_BUDGET_INFO(satewpls1, "Satelco EasyWatch DVB-S light", BUDGET_KNC1S);
+MAKE_BUDGET_INFO(satewps, "Satelco EasyWatch DVB-S", BUDGET_KNC1S);
+MAKE_BUDGET_INFO(satewplc, "Satelco EasyWatch DVB-C", BUDGET_KNC1CP);
+MAKE_BUDGET_INFO(satewcmk3, "Satelco EasyWatch DVB-C MK3", BUDGET_KNC1C_MK3);
+MAKE_BUDGET_INFO(satewt, "Satelco EasyWatch DVB-T", BUDGET_KNC1T);
MAKE_BUDGET_INFO(knc1sp, "KNC1 DVB-S Plus", BUDGET_KNC1SP);
+MAKE_BUDGET_INFO(knc1spx4, "KNC1 DVB-S Plus X4", BUDGET_KNC1SP);
MAKE_BUDGET_INFO(knc1cp, "KNC1 DVB-C Plus", BUDGET_KNC1CP);
+MAKE_BUDGET_INFO(knc1cmk3, "KNC1 DVB-C MK3", BUDGET_KNC1C_MK3);
+MAKE_BUDGET_INFO(knc1cpmk3, "KNC1 DVB-C Plus MK3", BUDGET_KNC1CP_MK3);
MAKE_BUDGET_INFO(knc1tp, "KNC1 DVB-T Plus", BUDGET_KNC1TP);
MAKE_BUDGET_INFO(cin1200s, "TerraTec Cinergy 1200 DVB-S", BUDGET_CIN1200S);
MAKE_BUDGET_INFO(cin1200sn, "TerraTec Cinergy 1200 DVB-S", BUDGET_CIN1200S);
MAKE_BUDGET_INFO(cin1200c, "Terratec Cinergy 1200 DVB-C", BUDGET_CIN1200C);
+MAKE_BUDGET_INFO(cin1200cmk3, "Terratec Cinergy 1200 DVB-C MK3", BUDGET_CIN1200C_MK3);
MAKE_BUDGET_INFO(cin1200t, "Terratec Cinergy 1200 DVB-T", BUDGET_CIN1200T);
static struct pci_device_id pci_tbl[] = {
MAKE_EXTENSION_PCI(knc1s, 0x1131, 0x0010),
MAKE_EXTENSION_PCI(knc1s, 0x1894, 0x0010),
MAKE_EXTENSION_PCI(knc1sp, 0x1131, 0x0011),
+ MAKE_EXTENSION_PCI(knc1sp, 0x1894, 0x0011),
MAKE_EXTENSION_PCI(kncxs, 0x1894, 0x0014),
+ MAKE_EXTENSION_PCI(knc1spx4, 0x1894, 0x0015),
MAKE_EXTENSION_PCI(kncxs, 0x1894, 0x0016),
MAKE_EXTENSION_PCI(satewpls, 0x1894, 0x001e),
MAKE_EXTENSION_PCI(satewpls1, 0x1894, 0x001a),
+ MAKE_EXTENSION_PCI(satewps, 0x1894, 0x001b),
+ MAKE_EXTENSION_PCI(satewplc, 0x1894, 0x002a),
+ MAKE_EXTENSION_PCI(satewcmk3, 0x1894, 0x002c),
+ MAKE_EXTENSION_PCI(satewt, 0x1894, 0x003a),
MAKE_EXTENSION_PCI(knc1c, 0x1894, 0x0020),
MAKE_EXTENSION_PCI(knc1cp, 0x1894, 0x0021),
+ MAKE_EXTENSION_PCI(knc1cmk3, 0x1894, 0x0022),
+ MAKE_EXTENSION_PCI(knc1cpmk3, 0x1894, 0x0023),
MAKE_EXTENSION_PCI(knc1t, 0x1894, 0x0030),
MAKE_EXTENSION_PCI(knc1tp, 0x1894, 0x0031),
MAKE_EXTENSION_PCI(cin1200s, 0x153b, 0x1154),
MAKE_EXTENSION_PCI(cin1200sn, 0x153b, 0x1155),
MAKE_EXTENSION_PCI(cin1200c, 0x153b, 0x1156),
+ MAKE_EXTENSION_PCI(cin1200cmk3, 0x153b, 0x1176),
MAKE_EXTENSION_PCI(cin1200t, 0x153b, 0x1157),
{
.vendor = 0,
static struct saa7146_extension budget_extension = {
.name = "budget_av",
- .flags = SAA7146_I2C_SHORT_DELAY,
+ .flags = SAA7146_USE_I2C_IRQ,
.pci_tbl = pci_tbl,
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff