#define deb_info(args...) dprintk(debug,0x01,args)
/* common stuff used by the different dibusb modules */
-int dibusb_streaming_ctrl(struct dvb_usb_device *d, int onoff)
+int dibusb_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
{
- if (d->priv != NULL) {
- struct dibusb_state *st = d->priv;
+ if (adap->priv != NULL) {
+ struct dibusb_state *st = adap->priv;
if (st->ops.fifo_ctrl != NULL)
- if (st->ops.fifo_ctrl(d->fe,onoff)) {
+ if (st->ops.fifo_ctrl(adap->fe,onoff)) {
err("error while controlling the fifo of the demod.");
return -ENODEV;
}
}
EXPORT_SYMBOL(dibusb_streaming_ctrl);
-int dibusb_pid_filter(struct dvb_usb_device *d, int index, u16 pid, int onoff)
+int dibusb_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid, int onoff)
{
- if (d->priv != NULL) {
- struct dibusb_state *st = d->priv;
+ if (adap->priv != NULL) {
+ struct dibusb_state *st = adap->priv;
if (st->ops.pid_ctrl != NULL)
- st->ops.pid_ctrl(d->fe,index,pid,onoff);
+ st->ops.pid_ctrl(adap->fe,index,pid,onoff);
}
return 0;
}
EXPORT_SYMBOL(dibusb_pid_filter);
-int dibusb_pid_filter_ctrl(struct dvb_usb_device *d, int onoff)
+int dibusb_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff)
{
- if (d->priv != NULL) {
- struct dibusb_state *st = d->priv;
+ if (adap->priv != NULL) {
+ struct dibusb_state *st = adap->priv;
if (st->ops.pid_parse != NULL)
- if (st->ops.pid_parse(d->fe,onoff) < 0)
+ if (st->ops.pid_parse(adap->fe,onoff) < 0)
err("could not handle pid_parser");
}
return 0;
}
EXPORT_SYMBOL(dibusb_power_ctrl);
-int dibusb2_0_streaming_ctrl(struct dvb_usb_device *d, int onoff)
+int dibusb2_0_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
{
u8 b[3] = { 0 };
int ret;
- if ((ret = dibusb_streaming_ctrl(d,onoff)) < 0)
+ if ((ret = dibusb_streaming_ctrl(adap,onoff)) < 0)
return ret;
if (onoff) {
b[0] = DIBUSB_REQ_SET_STREAMING_MODE;
b[1] = 0x00;
- if ((ret = dvb_usb_generic_write(d,b,2)) < 0)
+ if ((ret = dvb_usb_generic_write(adap->dev,b,2)) < 0)
return ret;
}
b[0] = DIBUSB_REQ_SET_IOCTL;
b[1] = onoff ? DIBUSB_IOCTL_CMD_ENABLE_STREAM : DIBUSB_IOCTL_CMD_DISABLE_STREAM;
- return dvb_usb_generic_write(d,b,3);
+ return dvb_usb_generic_write(adap->dev,b,3);
}
EXPORT_SYMBOL(dibusb2_0_streaming_ctrl);
if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
return -EAGAIN;
- if (num > 2)
- warn("more than 2 i2c messages at a time is not handled yet. TODO.");
-
for (i = 0; i < num; i++) {
/* write/read request */
- if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) {
+ if (i+1 < num && (msg[i].flags & I2C_M_RD) == 0
+ && (msg[i+1].flags & I2C_M_RD)) {
if (dibusb_i2c_msg(d, msg[i].addr, msg[i].buf,msg[i].len,
msg[i+1].buf,msg[i+1].len) < 0)
break;
i++;
- } else
+ } else if ((msg[i].flags & I2C_M_RD) == 0) {
if (dibusb_i2c_msg(d, msg[i].addr, msg[i].buf,msg[i].len,NULL,0) < 0)
break;
+ } else if (msg[i].addr != 0x50) {
+ /* 0x50 is the address of the eeprom - we need to protect it
+ * from dibusb's bad i2c implementation: reads without
+ * writing the offset before are forbidden */
+ if (dibusb_i2c_msg(d, msg[i].addr, NULL, 0, msg[i].buf, msg[i].len) < 0)
+ break;
+ }
}
mutex_unlock(&d->i2c_mutex);
}
EXPORT_SYMBOL(dibusb_read_eeprom_byte);
-static const struct dib3000p_agc_config dib3000p_agc_panasonic_env57h1xd5 = {
- { 0x51, 0x301d, 0x0, 0x1cc7, 0xdc29, 0x570a,
- 0xbae1, 0x8ccd, 0x3b6d, 0x551d, 0xa, 0x951e }
+/* 3000MC/P stuff */
+// Config Adjacent channels Perf -cal22
+static struct dibx000_agc_config dib3000p_mt2060_agc_config = {
+ .band_caps = BAND_VHF | BAND_UHF,
+ .setup = (1 << 8) | (5 << 5) | (1 << 4) | (1 << 3) | (0 << 2) | (2 << 0),
+
+ .agc1_max = 48497,
+ .agc1_min = 23593,
+ .agc2_max = 46531,
+ .agc2_min = 24904,
+
+ .agc1_pt1 = 0x65,
+ .agc1_pt2 = 0x69,
+
+ .agc1_slope1 = 0x51,
+ .agc1_slope2 = 0x27,
+
+ .agc2_pt1 = 0,
+ .agc2_pt2 = 0x33,
+
+ .agc2_slope1 = 0x35,
+ .agc2_slope2 = 0x37,
};
-static const struct dib3000p_agc_config dib3000p_agc_microtune_mt2060 = {
- { 0x196, 0x301d, 0x0, 0x1cc7, 0xffff, 0x5c29,
- 0xa8f6, 0x5eb8, 0x65ff, 0x40ff, 0x8a, 0x1114 }
+static struct dib3000mc_config stk3000p_dib3000p_config = {
+ &dib3000p_mt2060_agc_config,
+
+ .max_time = 0x196,
+ .ln_adc_level = 0x1cc7,
+
+ .output_mpeg2_in_188_bytes = 1,
+
+ .agc_command1 = 1,
+ .agc_command2 = 1,
};
-static struct mt2060_config stk3000p_mt2060_config = {
- .i2c_address = 0x60,
+static struct dibx000_agc_config dib3000p_panasonic_agc_config = {
+ .band_caps = BAND_VHF | BAND_UHF,
+ .setup = (1 << 8) | (5 << 5) | (1 << 4) | (1 << 3) | (0 << 2) | (2 << 0),
+
+ .agc1_max = 56361,
+ .agc1_min = 22282,
+ .agc2_max = 47841,
+ .agc2_min = 36045,
+
+ .agc1_pt1 = 0x3b,
+ .agc1_pt2 = 0x6b,
+
+ .agc1_slope1 = 0x55,
+ .agc1_slope2 = 0x1d,
+
+ .agc2_pt1 = 0,
+ .agc2_pt2 = 0x0a,
+
+ .agc2_slope1 = 0x95,
+ .agc2_slope2 = 0x1e,
+};
+
+#if defined(CONFIG_DVB_DIB3000MC) || \
+ (defined(CONFIG_DVB_DIB3000MC_MODULE) && defined(MODULE))
+
+static struct dib3000mc_config mod3000p_dib3000p_config = {
+ &dib3000p_panasonic_agc_config,
+
+ .max_time = 0x51,
+ .ln_adc_level = 0x1cc7,
+
+ .output_mpeg2_in_188_bytes = 1,
+
+ .agc_command1 = 1,
+ .agc_command2 = 1,
};
-int dibusb_dib3000mc_frontend_attach(struct dvb_usb_device *d)
+int dibusb_dib3000mc_frontend_attach(struct dvb_usb_adapter *adap)
{
- struct dib3000_config demod_cfg;
- struct dibusb_state *st = d->priv;
+ if (adap->dev->udev->descriptor.idVendor == USB_VID_LITEON &&
+ adap->dev->udev->descriptor.idProduct ==
+ USB_PID_LITEON_DVB_T_WARM) {
+ msleep(1000);
+ }
+
+ if ((adap->fe = dvb_attach(dib3000mc_attach, &adap->dev->i2c_adap, DEFAULT_DIB3000P_I2C_ADDRESS, &mod3000p_dib3000p_config)) != NULL ||
+ (adap->fe = dvb_attach(dib3000mc_attach, &adap->dev->i2c_adap, DEFAULT_DIB3000MC_I2C_ADDRESS, &mod3000p_dib3000p_config)) != NULL) {
+ if (adap->priv != NULL) {
+ struct dibusb_state *st = adap->priv;
+ st->ops.pid_parse = dib3000mc_pid_parse;
+ st->ops.pid_ctrl = dib3000mc_pid_control;
+ }
+ return 0;
+ }
return -ENODEV;
}
EXPORT_SYMBOL(dibusb_dib3000mc_frontend_attach);
-int dibusb_dib3000mc_tuner_attach (struct dvb_usb_device *d)
+static struct mt2060_config stk3000p_mt2060_config = {
+ 0x60
+};
+
+int dibusb_dib3000mc_tuner_attach(struct dvb_usb_adapter *adap)
{
- return -ENODEV;
+ struct dibusb_state *st = adap->priv;
+ u8 a,b;
+ u16 if1 = 1220;
+ struct i2c_adapter *tun_i2c;
+
+ // First IF calibration for Liteon Sticks
+ if (adap->dev->udev->descriptor.idVendor == USB_VID_LITEON &&
+ adap->dev->udev->descriptor.idProduct == USB_PID_LITEON_DVB_T_WARM) {
+
+ dibusb_read_eeprom_byte(adap->dev,0x7E,&a);
+ dibusb_read_eeprom_byte(adap->dev,0x7F,&b);
+
+ if (a == 0x00)
+ if1 += b;
+ else if (a == 0x80)
+ if1 -= b;
+ else
+ warn("LITE-ON DVB-T: Strange IF1 calibration :%2X %2X\n", a, b);
+
+ } else if (adap->dev->udev->descriptor.idVendor == USB_VID_DIBCOM &&
+ adap->dev->udev->descriptor.idProduct == USB_PID_DIBCOM_MOD3001_WARM) {
+ u8 desc;
+ dibusb_read_eeprom_byte(adap->dev, 7, &desc);
+ if (desc == 2) {
+ a = 127;
+ do {
+ dibusb_read_eeprom_byte(adap->dev, a, &desc);
+ a--;
+ } while (a > 7 && (desc == 0xff || desc == 0x00));
+ if (desc & 0x80)
+ if1 -= (0xff - desc);
+ else
+ if1 += desc;
+ }
+ }
+
+ tun_i2c = dib3000mc_get_tuner_i2c_master(adap->fe, 1);
+ if (dvb_attach(mt2060_attach, adap->fe, tun_i2c, &stk3000p_mt2060_config, if1) == NULL) {
+ /* not found - use panasonic pll parameters */
+ if (dvb_attach(dvb_pll_attach, adap->fe, 0x60, tun_i2c, DVB_PLL_ENV57H1XD5) == NULL)
+ return -ENOMEM;
+ } else {
+ st->mt2060_present = 1;
+ /* set the correct parameters for the dib3000p */
+ dib3000mc_set_config(adap->fe, &stk3000p_dib3000p_config);
+ }
+ return 0;
}
EXPORT_SYMBOL(dibusb_dib3000mc_tuner_attach);
+#endif
/*
* common remote control stuff
*/
struct dvb_usb_rc_key dibusb_rc_keys[] = {
/* Key codes for the little Artec T1/Twinhan/HAMA/ remote. */
- { 0x00, 0x16, KEY_POWER },
- { 0x00, 0x10, KEY_MUTE },
- { 0x00, 0x03, KEY_1 },
- { 0x00, 0x01, KEY_2 },
- { 0x00, 0x06, KEY_3 },
- { 0x00, 0x09, KEY_4 },
- { 0x00, 0x1d, KEY_5 },
- { 0x00, 0x1f, KEY_6 },
- { 0x00, 0x0d, KEY_7 },
- { 0x00, 0x19, KEY_8 },
- { 0x00, 0x1b, KEY_9 },
- { 0x00, 0x15, KEY_0 },
- { 0x00, 0x05, KEY_CHANNELUP },
- { 0x00, 0x02, KEY_CHANNELDOWN },
- { 0x00, 0x1e, KEY_VOLUMEUP },
- { 0x00, 0x0a, KEY_VOLUMEDOWN },
- { 0x00, 0x11, KEY_RECORD },
- { 0x00, 0x17, KEY_FAVORITES }, /* Heart symbol - Channel list. */
- { 0x00, 0x14, KEY_PLAY },
- { 0x00, 0x1a, KEY_STOP },
- { 0x00, 0x40, KEY_REWIND },
- { 0x00, 0x12, KEY_FASTFORWARD },
- { 0x00, 0x0e, KEY_PREVIOUS }, /* Recall - Previous channel. */
- { 0x00, 0x4c, KEY_PAUSE },
- { 0x00, 0x4d, KEY_SCREEN }, /* Full screen mode. */
- { 0x00, 0x54, KEY_AUDIO }, /* MTS - Switch to secondary audio. */
+ { 0x0016, KEY_POWER },
+ { 0x0010, KEY_MUTE },
+ { 0x0003, KEY_1 },
+ { 0x0001, KEY_2 },
+ { 0x0006, KEY_3 },
+ { 0x0009, KEY_4 },
+ { 0x001d, KEY_5 },
+ { 0x001f, KEY_6 },
+ { 0x000d, KEY_7 },
+ { 0x0019, KEY_8 },
+ { 0x001b, KEY_9 },
+ { 0x0015, KEY_0 },
+ { 0x0005, KEY_CHANNELUP },
+ { 0x0002, KEY_CHANNELDOWN },
+ { 0x001e, KEY_VOLUMEUP },
+ { 0x000a, KEY_VOLUMEDOWN },
+ { 0x0011, KEY_RECORD },
+ { 0x0017, KEY_FAVORITES }, /* Heart symbol - Channel list. */
+ { 0x0014, KEY_PLAY },
+ { 0x001a, KEY_STOP },
+ { 0x0040, KEY_REWIND },
+ { 0x0012, KEY_FASTFORWARD },
+ { 0x000e, KEY_PREVIOUS }, /* Recall - Previous channel. */
+ { 0x004c, KEY_PAUSE },
+ { 0x004d, KEY_SCREEN }, /* Full screen mode. */
+ { 0x0054, KEY_AUDIO }, /* MTS - Switch to secondary audio. */
/* additional keys TwinHan VisionPlus, the Artec seemingly not have */
- { 0x00, 0x0c, KEY_CANCEL }, /* Cancel */
- { 0x00, 0x1c, KEY_EPG }, /* EPG */
- { 0x00, 0x00, KEY_TAB }, /* Tab */
- { 0x00, 0x48, KEY_INFO }, /* Preview */
- { 0x00, 0x04, KEY_LIST }, /* RecordList */
- { 0x00, 0x0f, KEY_TEXT }, /* Teletext */
+ { 0x000c, KEY_CANCEL }, /* Cancel */
+ { 0x001c, KEY_EPG }, /* EPG */
+ { 0x0000, KEY_TAB }, /* Tab */
+ { 0x0048, KEY_INFO }, /* Preview */
+ { 0x0004, KEY_LIST }, /* RecordList */
+ { 0x000f, KEY_TEXT }, /* Teletext */
/* Key codes for the KWorld/ADSTech/JetWay remote. */
- { 0x86, 0x12, KEY_POWER },
- { 0x86, 0x0f, KEY_SELECT }, /* source */
- { 0x86, 0x0c, KEY_UNKNOWN }, /* scan */
- { 0x86, 0x0b, KEY_EPG },
- { 0x86, 0x10, KEY_MUTE },
- { 0x86, 0x01, KEY_1 },
- { 0x86, 0x02, KEY_2 },
- { 0x86, 0x03, KEY_3 },
- { 0x86, 0x04, KEY_4 },
- { 0x86, 0x05, KEY_5 },
- { 0x86, 0x06, KEY_6 },
- { 0x86, 0x07, KEY_7 },
- { 0x86, 0x08, KEY_8 },
- { 0x86, 0x09, KEY_9 },
- { 0x86, 0x0a, KEY_0 },
- { 0x86, 0x18, KEY_ZOOM },
- { 0x86, 0x1c, KEY_UNKNOWN }, /* preview */
- { 0x86, 0x13, KEY_UNKNOWN }, /* snap */
- { 0x86, 0x00, KEY_UNDO },
- { 0x86, 0x1d, KEY_RECORD },
- { 0x86, 0x0d, KEY_STOP },
- { 0x86, 0x0e, KEY_PAUSE },
- { 0x86, 0x16, KEY_PLAY },
- { 0x86, 0x11, KEY_BACK },
- { 0x86, 0x19, KEY_FORWARD },
- { 0x86, 0x14, KEY_UNKNOWN }, /* pip */
- { 0x86, 0x15, KEY_ESC },
- { 0x86, 0x1a, KEY_UP },
- { 0x86, 0x1e, KEY_DOWN },
- { 0x86, 0x1f, KEY_LEFT },
- { 0x86, 0x1b, KEY_RIGHT },
+ { 0x8612, KEY_POWER },
+ { 0x860f, KEY_SELECT }, /* source */
+ { 0x860c, KEY_UNKNOWN }, /* scan */
+ { 0x860b, KEY_EPG },
+ { 0x8610, KEY_MUTE },
+ { 0x8601, KEY_1 },
+ { 0x8602, KEY_2 },
+ { 0x8603, KEY_3 },
+ { 0x8604, KEY_4 },
+ { 0x8605, KEY_5 },
+ { 0x8606, KEY_6 },
+ { 0x8607, KEY_7 },
+ { 0x8608, KEY_8 },
+ { 0x8609, KEY_9 },
+ { 0x860a, KEY_0 },
+ { 0x8618, KEY_ZOOM },
+ { 0x861c, KEY_UNKNOWN }, /* preview */
+ { 0x8613, KEY_UNKNOWN }, /* snap */
+ { 0x8600, KEY_UNDO },
+ { 0x861d, KEY_RECORD },
+ { 0x860d, KEY_STOP },
+ { 0x860e, KEY_PAUSE },
+ { 0x8616, KEY_PLAY },
+ { 0x8611, KEY_BACK },
+ { 0x8619, KEY_FORWARD },
+ { 0x8614, KEY_UNKNOWN }, /* pip */
+ { 0x8615, KEY_ESC },
+ { 0x861a, KEY_UP },
+ { 0x861e, KEY_DOWN },
+ { 0x861f, KEY_LEFT },
+ { 0x861b, KEY_RIGHT },
/* Key codes for the DiBcom MOD3000 remote. */
- { 0x80, 0x00, KEY_MUTE },
- { 0x80, 0x01, KEY_TEXT },
- { 0x80, 0x02, KEY_HOME },
- { 0x80, 0x03, KEY_POWER },
-
- { 0x80, 0x04, KEY_RED },
- { 0x80, 0x05, KEY_GREEN },
- { 0x80, 0x06, KEY_YELLOW },
- { 0x80, 0x07, KEY_BLUE },
-
- { 0x80, 0x08, KEY_DVD },
- { 0x80, 0x09, KEY_AUDIO },
- { 0x80, 0x0a, KEY_MEDIA }, /* Pictures */
- { 0x80, 0x0b, KEY_VIDEO },
-
- { 0x80, 0x0c, KEY_BACK },
- { 0x80, 0x0d, KEY_UP },
- { 0x80, 0x0e, KEY_RADIO },
- { 0x80, 0x0f, KEY_EPG },
-
- { 0x80, 0x10, KEY_LEFT },
- { 0x80, 0x11, KEY_OK },
- { 0x80, 0x12, KEY_RIGHT },
- { 0x80, 0x13, KEY_UNKNOWN }, /* SAP */
-
- { 0x80, 0x14, KEY_TV },
- { 0x80, 0x15, KEY_DOWN },
- { 0x80, 0x16, KEY_MENU }, /* DVD Menu */
- { 0x80, 0x17, KEY_LAST },
-
- { 0x80, 0x18, KEY_RECORD },
- { 0x80, 0x19, KEY_STOP },
- { 0x80, 0x1a, KEY_PAUSE },
- { 0x80, 0x1b, KEY_PLAY },
-
- { 0x80, 0x1c, KEY_PREVIOUS },
- { 0x80, 0x1d, KEY_REWIND },
- { 0x80, 0x1e, KEY_FASTFORWARD },
- { 0x80, 0x1f, KEY_NEXT},
-
- { 0x80, 0x40, KEY_1 },
- { 0x80, 0x41, KEY_2 },
- { 0x80, 0x42, KEY_3 },
- { 0x80, 0x43, KEY_CHANNELUP },
-
- { 0x80, 0x44, KEY_4 },
- { 0x80, 0x45, KEY_5 },
- { 0x80, 0x46, KEY_6 },
- { 0x80, 0x47, KEY_CHANNELDOWN },
-
- { 0x80, 0x48, KEY_7 },
- { 0x80, 0x49, KEY_8 },
- { 0x80, 0x4a, KEY_9 },
- { 0x80, 0x4b, KEY_VOLUMEUP },
-
- { 0x80, 0x4c, KEY_CLEAR },
- { 0x80, 0x4d, KEY_0 },
- { 0x80, 0x4e, KEY_ENTER },
- { 0x80, 0x4f, KEY_VOLUMEDOWN },
+ { 0x8000, KEY_MUTE },
+ { 0x8001, KEY_TEXT },
+ { 0x8002, KEY_HOME },
+ { 0x8003, KEY_POWER },
+
+ { 0x8004, KEY_RED },
+ { 0x8005, KEY_GREEN },
+ { 0x8006, KEY_YELLOW },
+ { 0x8007, KEY_BLUE },
+
+ { 0x8008, KEY_DVD },
+ { 0x8009, KEY_AUDIO },
+ { 0x800a, KEY_MEDIA }, /* Pictures */
+ { 0x800b, KEY_VIDEO },
+
+ { 0x800c, KEY_BACK },
+ { 0x800d, KEY_UP },
+ { 0x800e, KEY_RADIO },
+ { 0x800f, KEY_EPG },
+
+ { 0x8010, KEY_LEFT },
+ { 0x8011, KEY_OK },
+ { 0x8012, KEY_RIGHT },
+ { 0x8013, KEY_UNKNOWN }, /* SAP */
+
+ { 0x8014, KEY_TV },
+ { 0x8015, KEY_DOWN },
+ { 0x8016, KEY_MENU }, /* DVD Menu */
+ { 0x8017, KEY_LAST },
+
+ { 0x8018, KEY_RECORD },
+ { 0x8019, KEY_STOP },
+ { 0x801a, KEY_PAUSE },
+ { 0x801b, KEY_PLAY },
+
+ { 0x801c, KEY_PREVIOUS },
+ { 0x801d, KEY_REWIND },
+ { 0x801e, KEY_FASTFORWARD },
+ { 0x801f, KEY_NEXT},
+
+ { 0x8040, KEY_1 },
+ { 0x8041, KEY_2 },
+ { 0x8042, KEY_3 },
+ { 0x8043, KEY_CHANNELUP },
+
+ { 0x8044, KEY_4 },
+ { 0x8045, KEY_5 },
+ { 0x8046, KEY_6 },
+ { 0x8047, KEY_CHANNELDOWN },
+
+ { 0x8048, KEY_7 },
+ { 0x8049, KEY_8 },
+ { 0x804a, KEY_9 },
+ { 0x804b, KEY_VOLUMEUP },
+
+ { 0x804c, KEY_CLEAR },
+ { 0x804d, KEY_0 },
+ { 0x804e, KEY_ENTER },
+ { 0x804f, KEY_VOLUMEDOWN },
};
EXPORT_SYMBOL(dibusb_rc_keys);
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff