*
*/
+#include <linux/hash.h>
+#include <linux/slab.h>
+
#include "af9015.h"
#include "af9013.h"
#include "mt2060.h"
#include "qt1010.h"
#include "tda18271.h"
#include "mxl5005s.h"
-#if 0
-#include "mc44s80x.h"
-#endif
+#include "mc44s803.h"
static int dvb_usb_af9015_debug;
module_param_named(debug, dvb_usb_af9015_debug, int, 0644);
static int dvb_usb_af9015_remote;
module_param_named(remote, dvb_usb_af9015_remote, int, 0644);
MODULE_PARM_DESC(remote, "select remote");
-static int dvb_usb_af9015_dual_mode;
-module_param_named(dual_mode, dvb_usb_af9015_dual_mode, int, 0644);
-MODULE_PARM_DESC(dual_mode, "enable dual mode");
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
static DEFINE_MUTEX(af9015_usb_mutex);
static struct af9015_config af9015_config;
-static struct dvb_usb_device_properties af9015_properties[2];
+static struct dvb_usb_device_properties af9015_properties[3];
static int af9015_properties_count = ARRAY_SIZE(af9015_properties);
static struct af9013_config af9015_af9013_config[] = {
static int af9015_rw_udev(struct usb_device *udev, struct req_t *req)
{
+#define BUF_LEN 63
+#define REQ_HDR_LEN 8 /* send header size */
+#define ACK_HDR_LEN 2 /* rece header size */
int act_len, ret;
- u8 buf[64];
+ u8 buf[BUF_LEN];
u8 write = 1;
- u8 msg_len = 8;
+ u8 msg_len = REQ_HDR_LEN;
static u8 seq; /* packet sequence number */
if (mutex_lock_interruptible(&af9015_usb_mutex) < 0)
switch (req->cmd) {
case GET_CONFIG:
- case BOOT:
case READ_MEMORY:
case RECONNECT_USB:
case GET_IR_CODE:
break;
case WRITE_MEMORY:
if (((req->addr & 0xff00) == 0xff00) ||
- ((req->addr & 0xae00) == 0xae00))
+ ((req->addr & 0xff00) == 0xae00))
buf[0] = WRITE_VIRTUAL_MEMORY;
case WRITE_VIRTUAL_MEMORY:
case COPY_FIRMWARE:
case DOWNLOAD_FIRMWARE:
+ case BOOT:
break;
default:
err("unknown command:%d", req->cmd);
goto error_unlock;
}
+ /* buffer overflow check */
+ if ((write && (req->data_len > BUF_LEN - REQ_HDR_LEN)) ||
+ (!write && (req->data_len > BUF_LEN - ACK_HDR_LEN))) {
+ err("too much data; cmd:%d len:%d", req->cmd, req->data_len);
+ ret = -EINVAL;
+ goto error_unlock;
+ }
+
/* write requested */
if (write) {
- memcpy(&buf[8], req->data, req->data_len);
+ memcpy(&buf[REQ_HDR_LEN], req->data, req->data_len);
msg_len += req->data_len;
}
+
deb_xfer(">>> ");
debug_dump(buf, msg_len, deb_xfer);
/* send req */
ret = usb_bulk_msg(udev, usb_sndbulkpipe(udev, 0x02), buf, msg_len,
- &act_len, AF9015_USB_TIMEOUT);
+ &act_len, AF9015_USB_TIMEOUT);
if (ret)
err("bulk message failed:%d (%d/%d)", ret, msg_len, act_len);
else
if (req->cmd == DOWNLOAD_FIRMWARE || req->cmd == RECONNECT_USB)
goto exit_unlock;
- /* receive ack and data if read req */
- msg_len = 1 + 1 + req->data_len; /* seq + status + data len */
+ /* write receives seq + status = 2 bytes
+ read receives seq + status + data = 2 + N bytes */
+ msg_len = ACK_HDR_LEN;
+ if (!write)
+ msg_len += req->data_len;
+
ret = usb_bulk_msg(udev, usb_rcvbulkpipe(udev, 0x81), buf, msg_len,
- &act_len, AF9015_USB_TIMEOUT);
+ &act_len, AF9015_USB_TIMEOUT);
if (ret) {
err("recv bulk message failed:%d", ret);
ret = -1;
/* read request, copy returned data to return buf */
if (!write)
- memcpy(req->data, &buf[2], req->data_len);
+ memcpy(req->data, &buf[ACK_HDR_LEN], req->data_len);
error_unlock:
exit_unlock:
req.data = &msg[i+1].buf[0];
ret = af9015_ctrl_msg(d, &req);
i += 2;
+ } else if (msg[i].flags & I2C_M_RD) {
+ ret = -EINVAL;
+ if (msg[i].addr ==
+ af9015_af9013_config[0].demod_address)
+ goto error;
+ else
+ req.cmd = READ_I2C;
+ req.i2c_addr = msg[i].addr;
+ req.addr = addr;
+ req.mbox = mbox;
+ req.addr_len = addr_len;
+ req.data_len = msg[i].len;
+ req.data = &msg[i].buf[0];
+ ret = af9015_ctrl_msg(d, &req);
+ i += 1;
} else {
if (msg[i].addr ==
af9015_af9013_config[0].demod_address)
u8 packet_size;
deb_info("%s: USB speed:%d\n", __func__, d->udev->speed);
+ /* Windows driver uses packet count 21 for USB1.1 and 348 for USB2.0.
+ We use smaller - about 1/4 from the original, 5 and 87. */
#define TS_PACKET_SIZE 188
-#define TS_USB20_PACKET_COUNT 348
+#define TS_USB20_PACKET_COUNT 87
#define TS_USB20_FRAME_SIZE (TS_PACKET_SIZE*TS_USB20_PACKET_COUNT)
-#define TS_USB11_PACKET_COUNT 21
+#define TS_USB11_PACKET_COUNT 5
#define TS_USB11_FRAME_SIZE (TS_PACKET_SIZE*TS_USB11_PACKET_COUNT)
#define TS_USB20_MAX_PACKET_SIZE 512
return ret;
}
-/* dump eeprom */
-static int af9015_eeprom_dump(struct dvb_usb_device *d)
+/* hash (and dump) eeprom */
+static int af9015_eeprom_hash(struct usb_device *udev)
{
- char buf[52], buf2[4];
- u8 reg, val;
-
- for (reg = 0; ; reg++) {
- if (reg % 16 == 0) {
- if (reg)
- deb_info("%s\n", buf);
- sprintf(buf, "%02x: ", reg);
- }
- if (af9015_read_reg_i2c(d, AF9015_I2C_EEPROM, reg, &val) == 0)
- sprintf(buf2, "%02x ", val);
- else
- strcpy(buf2, "-- ");
- strcat(buf, buf2);
- if (reg == 0xff)
- break;
+ static const unsigned int eeprom_size = 256;
+ unsigned int reg;
+ int ret;
+ u8 val, *eeprom;
+ struct req_t req = {READ_I2C, AF9015_I2C_EEPROM, 0, 0, 1, 1, &val};
+
+ eeprom = kmalloc(eeprom_size, GFP_KERNEL);
+ if (eeprom == NULL)
+ return -ENOMEM;
+
+ for (reg = 0; reg < eeprom_size; reg++) {
+ req.addr = reg;
+ ret = af9015_rw_udev(udev, &req);
+ if (ret)
+ goto free;
+ eeprom[reg] = val;
}
- deb_info("%s\n", buf);
- return 0;
+
+ if (dvb_usb_af9015_debug & 0x01)
+ print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, eeprom,
+ eeprom_size);
+
+ BUG_ON(eeprom_size % 4);
+
+ af9015_config.eeprom_sum = 0;
+ for (reg = 0; reg < eeprom_size / sizeof(u32); reg++) {
+ af9015_config.eeprom_sum *= GOLDEN_RATIO_PRIME_32;
+ af9015_config.eeprom_sum += le32_to_cpu(((u32 *)eeprom)[reg]);
+ }
+
+ deb_info("%s: eeprom sum=%.8x\n", __func__, af9015_config.eeprom_sum);
+
+ ret = 0;
+free:
+ kfree(eeprom);
+ return ret;
}
static int af9015_download_ir_table(struct dvb_usb_device *d)
return ret;
}
+struct af9015_setup {
+ unsigned int id;
+ struct dvb_usb_rc_key *rc_key_map;
+ unsigned int rc_key_map_size;
+ u8 *ir_table;
+ unsigned int ir_table_size;
+};
+
+static const struct af9015_setup *af9015_setup_match(unsigned int id,
+ const struct af9015_setup *table)
+{
+ for (; table->rc_key_map; table++)
+ if (table->id == id)
+ return table;
+ return NULL;
+}
+
+static const struct af9015_setup af9015_setup_modparam[] = {
+ { AF9015_REMOTE_A_LINK_DTU_M,
+ af9015_rc_keys_a_link, ARRAY_SIZE(af9015_rc_keys_a_link),
+ af9015_ir_table_a_link, ARRAY_SIZE(af9015_ir_table_a_link) },
+ { AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3,
+ af9015_rc_keys_msi, ARRAY_SIZE(af9015_rc_keys_msi),
+ af9015_ir_table_msi, ARRAY_SIZE(af9015_ir_table_msi) },
+ { AF9015_REMOTE_MYGICTV_U718,
+ af9015_rc_keys_mygictv, ARRAY_SIZE(af9015_rc_keys_mygictv),
+ af9015_ir_table_mygictv, ARRAY_SIZE(af9015_ir_table_mygictv) },
+ { AF9015_REMOTE_DIGITTRADE_DVB_T,
+ af9015_rc_keys_digittrade, ARRAY_SIZE(af9015_rc_keys_digittrade),
+ af9015_ir_table_digittrade, ARRAY_SIZE(af9015_ir_table_digittrade) },
+ { AF9015_REMOTE_AVERMEDIA_KS,
+ af9015_rc_keys_avermedia, ARRAY_SIZE(af9015_rc_keys_avermedia),
+ af9015_ir_table_avermedia_ks, ARRAY_SIZE(af9015_ir_table_avermedia_ks) },
+ { }
+};
+
+/* don't add new entries here anymore, use hashes instead */
+static const struct af9015_setup af9015_setup_usbids[] = {
+ { USB_VID_LEADTEK,
+ af9015_rc_keys_leadtek, ARRAY_SIZE(af9015_rc_keys_leadtek),
+ af9015_ir_table_leadtek, ARRAY_SIZE(af9015_ir_table_leadtek) },
+ { USB_VID_VISIONPLUS,
+ af9015_rc_keys_twinhan, ARRAY_SIZE(af9015_rc_keys_twinhan),
+ af9015_ir_table_twinhan, ARRAY_SIZE(af9015_ir_table_twinhan) },
+ { USB_VID_KWORLD_2, /* TODO: use correct rc keys */
+ af9015_rc_keys_twinhan, ARRAY_SIZE(af9015_rc_keys_twinhan),
+ af9015_ir_table_kworld, ARRAY_SIZE(af9015_ir_table_kworld) },
+ { USB_VID_AVERMEDIA,
+ af9015_rc_keys_avermedia, ARRAY_SIZE(af9015_rc_keys_avermedia),
+ af9015_ir_table_avermedia, ARRAY_SIZE(af9015_ir_table_avermedia) },
+ { USB_VID_MSI_2,
+ af9015_rc_keys_msi_digivox_iii, ARRAY_SIZE(af9015_rc_keys_msi_digivox_iii),
+ af9015_ir_table_msi_digivox_iii, ARRAY_SIZE(af9015_ir_table_msi_digivox_iii) },
+ { }
+};
+
+static const struct af9015_setup af9015_setup_hashes[] = {
+ { 0xb8feb708,
+ af9015_rc_keys_msi, ARRAY_SIZE(af9015_rc_keys_msi),
+ af9015_ir_table_msi, ARRAY_SIZE(af9015_ir_table_msi) },
+ { 0xa3703d00,
+ af9015_rc_keys_a_link, ARRAY_SIZE(af9015_rc_keys_a_link),
+ af9015_ir_table_a_link, ARRAY_SIZE(af9015_ir_table_a_link) },
+ { 0x9b7dc64e,
+ af9015_rc_keys_mygictv, ARRAY_SIZE(af9015_rc_keys_mygictv),
+ af9015_ir_table_mygictv, ARRAY_SIZE(af9015_ir_table_mygictv) },
+ { }
+};
+
+static void af9015_set_remote_config(struct usb_device *udev,
+ struct dvb_usb_device_properties *props)
+{
+ const struct af9015_setup *table = NULL;
+
+ if (dvb_usb_af9015_remote) {
+ /* load remote defined as module param */
+ table = af9015_setup_match(dvb_usb_af9015_remote,
+ af9015_setup_modparam);
+ } else {
+ u16 vendor = le16_to_cpu(udev->descriptor.idVendor);
+
+ table = af9015_setup_match(af9015_config.eeprom_sum,
+ af9015_setup_hashes);
+
+ if (!table && vendor == USB_VID_AFATECH) {
+ /* Check USB manufacturer and product strings and try
+ to determine correct remote in case of chip vendor
+ reference IDs are used.
+ DO NOT ADD ANYTHING NEW HERE. Use hashes instead.
+ */
+ char manufacturer[10];
+ memset(manufacturer, 0, sizeof(manufacturer));
+ usb_string(udev, udev->descriptor.iManufacturer,
+ manufacturer, sizeof(manufacturer));
+ if (!strcmp("MSI", manufacturer)) {
+ /* iManufacturer 1 MSI
+ iProduct 2 MSI K-VOX */
+ table = af9015_setup_match(
+ AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3,
+ af9015_setup_modparam);
+ } else if (udev->descriptor.idProduct ==
+ cpu_to_le16(USB_PID_TREKSTOR_DVBT)) {
+ table = &(const struct af9015_setup){ 0,
+ af9015_rc_keys_trekstor,
+ ARRAY_SIZE(af9015_rc_keys_trekstor),
+ af9015_ir_table_trekstor,
+ ARRAY_SIZE(af9015_ir_table_trekstor)
+ };
+ }
+ } else if (!table)
+ table = af9015_setup_match(vendor, af9015_setup_usbids);
+ }
+
+ if (table) {
+ props->rc_key_map = table->rc_key_map;
+ props->rc_key_map_size = table->rc_key_map_size;
+ af9015_config.ir_table = table->ir_table;
+ af9015_config.ir_table_size = table->ir_table_size;
+ }
+}
+
static int af9015_read_config(struct usb_device *udev)
{
int ret;
u8 val, i, offset = 0;
struct req_t req = {READ_I2C, AF9015_I2C_EEPROM, 0, 0, 1, 1, &val};
- char manufacturer[10];
/* IR remote controller */
req.addr = AF9015_EEPROM_IR_MODE;
- ret = af9015_rw_udev(udev, &req);
+ /* first message will timeout often due to possible hw bug */
+ for (i = 0; i < 4; i++) {
+ ret = af9015_rw_udev(udev, &req);
+ if (!ret)
+ break;
+ }
if (ret)
goto error;
+
+ ret = af9015_eeprom_hash(udev);
+ if (ret)
+ goto error;
+
deb_info("%s: IR mode:%d\n", __func__, val);
for (i = 0; i < af9015_properties_count; i++) {
- if (val == AF9015_IR_MODE_DISABLED || val == 0x04) {
+ if (val == AF9015_IR_MODE_DISABLED) {
af9015_properties[i].rc_key_map = NULL;
af9015_properties[i].rc_key_map_size = 0;
- } else if (dvb_usb_af9015_remote) {
- /* load remote defined as module param */
- switch (dvb_usb_af9015_remote) {
- case AF9015_REMOTE_A_LINK_DTU_M:
- af9015_properties[i].rc_key_map =
- af9015_rc_keys_a_link;
- af9015_properties[i].rc_key_map_size =
- ARRAY_SIZE(af9015_rc_keys_a_link);
- af9015_config.ir_table = af9015_ir_table_a_link;
- af9015_config.ir_table_size =
- ARRAY_SIZE(af9015_ir_table_a_link);
- break;
- case AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3:
- af9015_properties[i].rc_key_map =
- af9015_rc_keys_msi;
- af9015_properties[i].rc_key_map_size =
- ARRAY_SIZE(af9015_rc_keys_msi);
- af9015_config.ir_table = af9015_ir_table_msi;
- af9015_config.ir_table_size =
- ARRAY_SIZE(af9015_ir_table_msi);
- break;
- case AF9015_REMOTE_MYGICTV_U718:
- af9015_properties[i].rc_key_map =
- af9015_rc_keys_mygictv;
- af9015_properties[i].rc_key_map_size =
- ARRAY_SIZE(af9015_rc_keys_mygictv);
- af9015_config.ir_table =
- af9015_ir_table_mygictv;
- af9015_config.ir_table_size =
- ARRAY_SIZE(af9015_ir_table_mygictv);
- break;
- }
- } else {
- switch (udev->descriptor.idVendor) {
- case USB_VID_LEADTEK:
- af9015_properties[i].rc_key_map =
- af9015_rc_keys_leadtek;
- af9015_properties[i].rc_key_map_size =
- ARRAY_SIZE(af9015_rc_keys_leadtek);
- af9015_config.ir_table =
- af9015_ir_table_leadtek;
- af9015_config.ir_table_size =
- ARRAY_SIZE(af9015_ir_table_leadtek);
- break;
- case USB_VID_VISIONPLUS:
- if (udev->descriptor.idProduct ==
- USB_PID_AZUREWAVE_AD_TU700) {
- af9015_properties[i].rc_key_map =
- af9015_rc_keys_twinhan;
- af9015_properties[i].rc_key_map_size =
- ARRAY_SIZE(af9015_rc_keys_twinhan);
- af9015_config.ir_table =
- af9015_ir_table_twinhan;
- af9015_config.ir_table_size =
- ARRAY_SIZE(af9015_ir_table_twinhan);
- }
- break;
- case USB_VID_KWORLD_2:
- /* TODO: use correct rc keys */
- af9015_properties[i].rc_key_map =
- af9015_rc_keys_twinhan;
- af9015_properties[i].rc_key_map_size =
- ARRAY_SIZE(af9015_rc_keys_twinhan);
- af9015_config.ir_table = af9015_ir_table_kworld;
- af9015_config.ir_table_size =
- ARRAY_SIZE(af9015_ir_table_kworld);
- break;
- /* Check USB manufacturer and product strings and try
- to determine correct remote in case of chip vendor
- reference IDs are used. */
- case USB_VID_AFATECH:
- memset(manufacturer, 0, sizeof(manufacturer));
- usb_string(udev, udev->descriptor.iManufacturer,
- manufacturer, sizeof(manufacturer));
- if (!strcmp("Geniatech", manufacturer)) {
- /* iManufacturer 1 Geniatech
- iProduct 2 AF9015 */
- af9015_properties[i].rc_key_map =
- af9015_rc_keys_mygictv;
- af9015_properties[i].rc_key_map_size =
- ARRAY_SIZE(af9015_rc_keys_mygictv);
- af9015_config.ir_table =
- af9015_ir_table_mygictv;
- af9015_config.ir_table_size =
- ARRAY_SIZE(af9015_ir_table_mygictv);
- } else if (!strcmp("MSI", manufacturer)) {
- /* iManufacturer 1 MSI
- iProduct 2 MSI K-VOX */
- af9015_properties[i].rc_key_map =
- af9015_rc_keys_msi;
- af9015_properties[i].rc_key_map_size =
- ARRAY_SIZE(af9015_rc_keys_msi);
- af9015_config.ir_table =
- af9015_ir_table_msi;
- af9015_config.ir_table_size =
- ARRAY_SIZE(af9015_ir_table_msi);
- }
- break;
- case USB_VID_AVERMEDIA:
- af9015_properties[i].rc_key_map =
- af9015_rc_keys_avermedia;
- af9015_properties[i].rc_key_map_size =
- ARRAY_SIZE(af9015_rc_keys_avermedia);
- af9015_config.ir_table =
- af9015_ir_table_avermedia;
- af9015_config.ir_table_size =
- ARRAY_SIZE(af9015_ir_table_avermedia);
- break;
- }
- }
+ } else
+ af9015_set_remote_config(udev, &af9015_properties[i]);
}
/* TS mode - one or two receivers */
goto error;
af9015_config.dual_mode = val;
deb_info("%s: TS mode:%d\n", __func__, af9015_config.dual_mode);
- /* disable dual mode by default because it is buggy */
- if (!dvb_usb_af9015_dual_mode)
- af9015_config.dual_mode = 0;
- /* set buffer size according to USB port speed */
+ /* Set adapter0 buffer size according to USB port speed, adapter1 buffer
+ size can be static because it is enabled only USB2.0 */
for (i = 0; i < af9015_properties_count; i++) {
/* USB1.1 set smaller buffersize and disable 2nd adapter */
if (udev->speed == USB_SPEED_FULL) {
- af9015_properties[i].adapter->stream.u.bulk.buffersize =
- TS_USB11_MAX_PACKET_SIZE;
+ af9015_properties[i].adapter[0].stream.u.bulk.buffersize
+ = TS_USB11_FRAME_SIZE;
/* disable 2nd adapter because we don't have
PID-filters */
af9015_config.dual_mode = 0;
} else {
- af9015_properties[i].adapter->stream.u.bulk.buffersize =
- TS_USB20_MAX_PACKET_SIZE;
+ af9015_properties[i].adapter[0].stream.u.bulk.buffersize
+ = TS_USB20_FRAME_SIZE;
}
}
switch (val) {
case AF9013_TUNER_ENV77H11D5:
case AF9013_TUNER_MT2060:
- case AF9013_TUNER_MC44S803:
case AF9013_TUNER_QT1010:
case AF9013_TUNER_UNKNOWN:
case AF9013_TUNER_MT2060_2:
case AF9013_TUNER_MXL5005R:
af9015_af9013_config[i].rf_spec_inv = 0;
break;
+ case AF9013_TUNER_MC44S803:
+ af9015_af9013_config[i].gpio[1] = AF9013_GPIO_LO;
+ af9015_af9013_config[i].rf_spec_inv = 1;
+ break;
+ case AF9013_TUNER_TDA18218:
+ warn("tuner NXP TDA18218 not supported yet");
+ return -ENODEV;
default:
warn("tuner id:%d not supported, please report!", val);
return -ENODEV;
if (ret)
err("eeprom read failed:%d", ret);
+ /* AverMedia AVerTV Volar Black HD (A850) device have bad EEPROM
+ content :-( Override some wrong values here. */
+ if (le16_to_cpu(udev->descriptor.idVendor) == USB_VID_AVERMEDIA &&
+ le16_to_cpu(udev->descriptor.idProduct) == USB_PID_AVERMEDIA_A850) {
+ deb_info("%s: AverMedia A850: overriding config\n", __func__);
+ /* disable dual mode */
+ af9015_config.dual_mode = 0;
+ /* disable 2nd adapter */
+ for (i = 0; i < af9015_properties_count; i++)
+ af9015_properties[i].num_adapters = 1;
+
+ /* set correct IF */
+ af9015_af9013_config[0].tuner_if = 4570;
+ }
+
return ret;
}
*state = REMOTE_NO_KEY_PRESSED;
for (i = 0; i < d->props.rc_key_map_size; i++) {
- if (!buf[1] && keymap[i].custom == buf[0] &&
- keymap[i].data == buf[2]) {
+ if (!buf[1] && rc5_custom(&keymap[i]) == buf[0] &&
+ rc5_data(&keymap[i]) == buf[2]) {
*event = keymap[i].event;
*state = REMOTE_KEY_PRESSED;
break;
deb_info("%s: init I2C\n", __func__);
ret = af9015_i2c_init(adap->dev);
-
- /* dump eeprom (debug) */
- ret = af9015_eeprom_dump(adap->dev);
- if (ret)
- return ret;
} else {
/* select I2C adapter */
i2c_adap = &state->i2c_adap;
.AgcMasterByte = 0x00,
};
+static struct mc44s803_config af9015_mc44s803_config = {
+ .i2c_address = 0xc0,
+ .dig_out = 1,
+};
+
static int af9015_tuner_attach(struct dvb_usb_adapter *adap)
{
struct af9015_state *state = adap->dev->priv;
DVB_PLL_TDA665X) == NULL ? -ENODEV : 0;
break;
case AF9013_TUNER_MC44S803:
-#if 0
- ret = dvb_attach(mc44s80x_attach, adap->fe, i2c_adap)
- == NULL ? -ENODEV : 0;
-#else
- ret = -ENODEV;
- info("Freescale MC44S803 tuner found but no driver for that" \
- "tuner. Look at the Linuxtv.org for tuner driver" \
- "status.");
-#endif
+ ret = dvb_attach(mc44s803_attach, adap->fe, i2c_adap,
+ &af9015_mc44s803_config) == NULL ? -ENODEV : 0;
break;
case AF9013_TUNER_UNKNOWN:
default:
{USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A309)},
/* 15 */{USB_DEVICE(USB_VID_MSI_2, USB_PID_MSI_DIGI_VOX_MINI_III)},
{USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U)},
+ {USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U_2)},
+ {USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U_3)},
+ {USB_DEVICE(USB_VID_AFATECH, USB_PID_TREKSTOR_DVBT)},
+/* 20 */{USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A850)},
+ {USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A805)},
+ {USB_DEVICE(USB_VID_KWORLD_2, USB_PID_CONCEPTRONIC_CTVDIGRCU)},
+ {USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_MC810)},
+ {USB_DEVICE(USB_VID_KYE, USB_PID_GENIUS_TVGO_DVB_T03)},
+/* 25 */{USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_399U_2)},
+ {USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_PC160_T)},
+ {USB_DEVICE(USB_VID_KWORLD_2, USB_PID_SVEON_STV20)},
+ {USB_DEVICE(USB_VID_KWORLD_2, USB_PID_TINYTWIN_2)},
+ {USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV2000DS)},
{0},
};
MODULE_DEVICE_TABLE(usb, af9015_usb_table);
.firmware = "dvb-usb-af9015.fw",
.no_reconnect = 1,
- .size_of_priv = sizeof(struct af9015_state), \
+ .size_of_priv = sizeof(struct af9015_state),
.num_adapters = 2,
.adapter = {
.type = USB_BULK,
.count = 6,
.endpoint = 0x85,
+ .u = {
+ .bulk = {
+ .buffersize =
+ TS_USB20_FRAME_SIZE,
+ }
+ }
},
}
},
.i2c_algo = &af9015_i2c_algo,
- .num_device_descs = 9,
+ .num_device_descs = 9, /* max 9 */
.devices = {
{
.name = "Afatech AF9015 DVB-T USB2.0 stick",
{
.name = "KWorld PlusTV Dual DVB-T Stick " \
"(DVB-T 399U)",
- .cold_ids = {&af9015_usb_table[4], NULL},
+ .cold_ids = {&af9015_usb_table[4],
+ &af9015_usb_table[25], NULL},
.warm_ids = {NULL},
},
{
.name = "DigitalNow TinyTwin DVB-T Receiver",
- .cold_ids = {&af9015_usb_table[5], NULL},
+ .cold_ids = {&af9015_usb_table[5],
+ &af9015_usb_table[28], NULL},
.warm_ids = {NULL},
},
{
.firmware = "dvb-usb-af9015.fw",
.no_reconnect = 1,
- .size_of_priv = sizeof(struct af9015_state), \
+ .size_of_priv = sizeof(struct af9015_state),
.num_adapters = 2,
.adapter = {
.type = USB_BULK,
.count = 6,
.endpoint = 0x85,
+ .u = {
+ .bulk = {
+ .buffersize =
+ TS_USB20_FRAME_SIZE,
+ }
+ }
},
}
},
.i2c_algo = &af9015_i2c_algo,
- .num_device_descs = 7,
+ .num_device_descs = 9, /* max 9 */
.devices = {
{
.name = "Xtensions XD-380",
{
.name = "KWorld USB DVB-T TV Stick II " \
"(VS-DVB-T 395U)",
- .cold_ids = {&af9015_usb_table[16], NULL},
+ .cold_ids = {&af9015_usb_table[16],
+ &af9015_usb_table[17],
+ &af9015_usb_table[18], NULL},
+ .warm_ids = {NULL},
+ },
+ {
+ .name = "TrekStor DVB-T USB Stick",
+ .cold_ids = {&af9015_usb_table[19], NULL},
+ .warm_ids = {NULL},
+ },
+ {
+ .name = "AverMedia AVerTV Volar Black HD " \
+ "(A850)",
+ .cold_ids = {&af9015_usb_table[20], NULL},
.warm_ids = {NULL},
},
}
- }
+ }, {
+ .caps = DVB_USB_IS_AN_I2C_ADAPTER,
+
+ .usb_ctrl = DEVICE_SPECIFIC,
+ .download_firmware = af9015_download_firmware,
+ .firmware = "dvb-usb-af9015.fw",
+ .no_reconnect = 1,
+
+ .size_of_priv = sizeof(struct af9015_state),
+
+ .num_adapters = 2,
+ .adapter = {
+ {
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER |
+ DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+
+ .pid_filter_count = 32,
+ .pid_filter = af9015_pid_filter,
+ .pid_filter_ctrl = af9015_pid_filter_ctrl,
+
+ .frontend_attach =
+ af9015_af9013_frontend_attach,
+ .tuner_attach = af9015_tuner_attach,
+ .stream = {
+ .type = USB_BULK,
+ .count = 6,
+ .endpoint = 0x84,
+ },
+ },
+ {
+ .frontend_attach =
+ af9015_af9013_frontend_attach,
+ .tuner_attach = af9015_tuner_attach,
+ .stream = {
+ .type = USB_BULK,
+ .count = 6,
+ .endpoint = 0x85,
+ .u = {
+ .bulk = {
+ .buffersize =
+ TS_USB20_FRAME_SIZE,
+ }
+ }
+ },
+ }
+ },
+
+ .identify_state = af9015_identify_state,
+
+ .rc_query = af9015_rc_query,
+ .rc_interval = 150,
+
+ .i2c_algo = &af9015_i2c_algo,
+
+ .num_device_descs = 7, /* max 9 */
+ .devices = {
+ {
+ .name = "AverMedia AVerTV Volar GPS 805 (A805)",
+ .cold_ids = {&af9015_usb_table[21], NULL},
+ .warm_ids = {NULL},
+ },
+ {
+ .name = "Conceptronic USB2.0 DVB-T CTVDIGRCU " \
+ "V3.0",
+ .cold_ids = {&af9015_usb_table[22], NULL},
+ .warm_ids = {NULL},
+ },
+ {
+ .name = "KWorld Digial MC-810",
+ .cold_ids = {&af9015_usb_table[23], NULL},
+ .warm_ids = {NULL},
+ },
+ {
+ .name = "Genius TVGo DVB-T03",
+ .cold_ids = {&af9015_usb_table[24], NULL},
+ .warm_ids = {NULL},
+ },
+ {
+ .name = "KWorld PlusTV DVB-T PCI Pro Card " \
+ "(DVB-T PC160-T)",
+ .cold_ids = {&af9015_usb_table[26], NULL},
+ .warm_ids = {NULL},
+ },
+ {
+ .name = "Sveon STV20 Tuner USB DVB-T HDTV",
+ .cold_ids = {&af9015_usb_table[27], NULL},
+ .warm_ids = {NULL},
+ },
+ {
+ .name = "Leadtek WinFast DTV2000DS",
+ .cold_ids = {&af9015_usb_table[29], NULL},
+ .warm_ids = {NULL},
+ },
+ }
+ },
};
static int af9015_usb_probe(struct usb_interface *intf,