* miss any bits.
*/
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/highmem.h>
-#include <linux/bitops.h>
#include <linux/kthread.h>
-#include <asm/atomic.h>
#include "raid6.h"
#include <linux/raid/bitmap.h>
#define STRIPE_SHIFT (PAGE_SHIFT - 9)
#define STRIPE_SECTORS (STRIPE_SIZE>>9)
#define IO_THRESHOLD 1
+#define BYPASS_THRESHOLD 1
#define NR_HASH (PAGE_SIZE / sizeof(struct hlist_head))
#define HASH_MASK (NR_HASH - 1)
#define __inline__
#endif
+#define printk_rl(args...) ((void) (printk_ratelimit() && printk(args)))
+
#if !RAID6_USE_EMPTY_ZERO_PAGE
/* In .bss so it's zeroed */
const char raid6_empty_zero_page[PAGE_SIZE] __attribute__((aligned(256)));
#endif
+/*
+ * We maintain a biased count of active stripes in the bottom 16 bits of
+ * bi_phys_segments, and a count of processed stripes in the upper 16 bits
+ */
+static inline int raid5_bi_phys_segments(struct bio *bio)
+{
+ return bio->bi_phys_segments & 0xffff;
+}
+
+static inline int raid5_bi_hw_segments(struct bio *bio)
+{
+ return (bio->bi_phys_segments >> 16) & 0xffff;
+}
+
+static inline int raid5_dec_bi_phys_segments(struct bio *bio)
+{
+ --bio->bi_phys_segments;
+ return raid5_bi_phys_segments(bio);
+}
+
+static inline int raid5_dec_bi_hw_segments(struct bio *bio)
+{
+ unsigned short val = raid5_bi_hw_segments(bio);
+
+ --val;
+ bio->bi_phys_segments = (val << 16) | raid5_bi_phys_segments(bio);
+ return val;
+}
+
+static inline void raid5_set_bi_hw_segments(struct bio *bio, unsigned int cnt)
+{
+ bio->bi_phys_segments = raid5_bi_phys_segments(bio) || (cnt << 16);
+}
+
static inline int raid6_next_disk(int disk, int raid_disks)
{
disk++;
return_bi = bi->bi_next;
bi->bi_next = NULL;
bi->bi_size = 0;
- bi->bi_end_io(bi,
- test_bit(BIO_UPTODATE, &bi->bi_flags)
- ? 0 : -EIO);
+ bio_endio(bi, 0);
bi = return_bi;
}
}
static void print_raid5_conf (raid5_conf_t *conf);
+static int stripe_operations_active(struct stripe_head *sh)
+{
+ return sh->check_state || sh->reconstruct_state ||
+ test_bit(STRIPE_BIOFILL_RUN, &sh->state) ||
+ test_bit(STRIPE_COMPUTE_RUN, &sh->state);
+}
+
static void __release_stripe(raid5_conf_t *conf, struct stripe_head *sh)
{
if (atomic_dec_and_test(&sh->count)) {
}
md_wakeup_thread(conf->mddev->thread);
} else {
- BUG_ON(sh->ops.pending);
+ BUG_ON(stripe_operations_active(sh));
if (test_and_clear_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) {
atomic_dec(&conf->preread_active_stripes);
if (atomic_read(&conf->preread_active_stripes) < IO_THRESHOLD)
return 0;
}
-static void raid5_build_block (struct stripe_head *sh, int i);
+static void raid5_build_block(struct stripe_head *sh, int i);
static void init_stripe(struct stripe_head *sh, sector_t sector, int pd_idx, int disks)
{
BUG_ON(atomic_read(&sh->count) != 0);
BUG_ON(test_bit(STRIPE_HANDLE, &sh->state));
- BUG_ON(sh->ops.pending || sh->ops.ack || sh->ops.complete);
+ BUG_ON(stripe_operations_active(sh));
CHECK_DEVLOCK();
pr_debug("init_stripe called, stripe %llu\n",
return sh;
}
-/* test_and_ack_op() ensures that we only dequeue an operation once */
-#define test_and_ack_op(op, pend) \
-do { \
- if (test_bit(op, &sh->ops.pending) && \
- !test_bit(op, &sh->ops.complete)) { \
- if (test_and_set_bit(op, &sh->ops.ack)) \
- clear_bit(op, &pend); \
- else \
- ack++; \
- } else \
- clear_bit(op, &pend); \
-} while (0)
-
-/* find new work to run, do not resubmit work that is already
- * in flight
- */
-static unsigned long get_stripe_work(struct stripe_head *sh)
-{
- unsigned long pending;
- int ack = 0;
-
- pending = sh->ops.pending;
-
- test_and_ack_op(STRIPE_OP_BIOFILL, pending);
- test_and_ack_op(STRIPE_OP_COMPUTE_BLK, pending);
- test_and_ack_op(STRIPE_OP_PREXOR, pending);
- test_and_ack_op(STRIPE_OP_BIODRAIN, pending);
- test_and_ack_op(STRIPE_OP_POSTXOR, pending);
- test_and_ack_op(STRIPE_OP_CHECK, pending);
- if (test_and_clear_bit(STRIPE_OP_IO, &sh->ops.pending))
- ack++;
-
- sh->ops.count -= ack;
- BUG_ON(sh->ops.count < 0);
-
- return pending;
-}
-
static void
raid5_end_read_request(struct bio *bi, int error);
static void
raid5_end_write_request(struct bio *bi, int error);
-static void ops_run_io(struct stripe_head *sh)
+static void ops_run_io(struct stripe_head *sh, struct stripe_head_state *s)
{
raid5_conf_t *conf = sh->raid_conf;
int i, disks = sh->disks;
rcu_read_unlock();
if (rdev) {
- if (test_bit(STRIPE_SYNCING, &sh->state) ||
- test_bit(STRIPE_EXPAND_SOURCE, &sh->state) ||
- test_bit(STRIPE_EXPAND_READY, &sh->state))
+ if (s->syncing || s->expanding || s->expanded)
md_sync_acct(rdev->bdev, STRIPE_SECTORS);
+ set_bit(STRIPE_IO_STARTED, &sh->state);
+
bi->bi_bdev = rdev->bdev;
pr_debug("%s: for %llu schedule op %ld on disc %d\n",
- __FUNCTION__, (unsigned long long)sh->sector,
+ __func__, (unsigned long long)sh->sector,
bi->bi_rw, i);
atomic_inc(&sh->count);
bi->bi_sector = sh->sector + rdev->data_offset;
raid5_conf_t *conf = sh->raid_conf;
int i;
- pr_debug("%s: stripe %llu\n", __FUNCTION__,
+ pr_debug("%s: stripe %llu\n", __func__,
(unsigned long long)sh->sector);
/* clear completed biofills */
+ spin_lock_irq(&conf->device_lock);
for (i = sh->disks; i--; ) {
struct r5dev *dev = &sh->dev[i];
/* acknowledge completion of a biofill operation */
/* and check if we need to reply to a read request,
* new R5_Wantfill requests are held off until
- * !test_bit(STRIPE_OP_BIOFILL, &sh->ops.pending)
+ * !STRIPE_BIOFILL_RUN
*/
if (test_and_clear_bit(R5_Wantfill, &dev->flags)) {
struct bio *rbi, *rbi2;
- /* The access to dev->read is outside of the
- * spin_lock_irq(&conf->device_lock), but is protected
- * by the STRIPE_OP_BIOFILL pending bit
- */
BUG_ON(!dev->read);
rbi = dev->read;
dev->read = NULL;
while (rbi && rbi->bi_sector <
dev->sector + STRIPE_SECTORS) {
rbi2 = r5_next_bio(rbi, dev->sector);
- spin_lock_irq(&conf->device_lock);
- if (--rbi->bi_phys_segments == 0) {
+ if (!raid5_dec_bi_phys_segments(rbi)) {
rbi->bi_next = return_bi;
return_bi = rbi;
}
- spin_unlock_irq(&conf->device_lock);
rbi = rbi2;
}
}
}
- clear_bit(STRIPE_OP_BIOFILL, &sh->ops.ack);
- clear_bit(STRIPE_OP_BIOFILL, &sh->ops.pending);
+ spin_unlock_irq(&conf->device_lock);
+ clear_bit(STRIPE_BIOFILL_RUN, &sh->state);
return_io(return_bi);
raid5_conf_t *conf = sh->raid_conf;
int i;
- pr_debug("%s: stripe %llu\n", __FUNCTION__,
+ pr_debug("%s: stripe %llu\n", __func__,
(unsigned long long)sh->sector);
for (i = sh->disks; i--; ) {
int target = sh->ops.target;
struct r5dev *tgt = &sh->dev[target];
- pr_debug("%s: stripe %llu\n", __FUNCTION__,
+ pr_debug("%s: stripe %llu\n", __func__,
(unsigned long long)sh->sector);
set_bit(R5_UPTODATE, &tgt->flags);
BUG_ON(!test_bit(R5_Wantcompute, &tgt->flags));
clear_bit(R5_Wantcompute, &tgt->flags);
- set_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.complete);
+ clear_bit(STRIPE_COMPUTE_RUN, &sh->state);
+ if (sh->check_state == check_state_compute_run)
+ sh->check_state = check_state_compute_result;
set_bit(STRIPE_HANDLE, &sh->state);
release_stripe(sh);
}
-static struct dma_async_tx_descriptor *
-ops_run_compute5(struct stripe_head *sh, unsigned long pending)
+static struct dma_async_tx_descriptor *ops_run_compute5(struct stripe_head *sh)
{
/* kernel stack size limits the total number of disks */
int disks = sh->disks;
int i;
pr_debug("%s: stripe %llu block: %d\n",
- __FUNCTION__, (unsigned long long)sh->sector, target);
+ __func__, (unsigned long long)sh->sector, target);
BUG_ON(!test_bit(R5_Wantcompute, &tgt->flags));
for (i = disks; i--; )
ASYNC_TX_XOR_ZERO_DST, NULL,
ops_complete_compute5, sh);
- /* ack now if postxor is not set to be run */
- if (tx && !test_bit(STRIPE_OP_POSTXOR, &pending))
- async_tx_ack(tx);
-
return tx;
}
{
struct stripe_head *sh = stripe_head_ref;
- pr_debug("%s: stripe %llu\n", __FUNCTION__,
+ pr_debug("%s: stripe %llu\n", __func__,
(unsigned long long)sh->sector);
-
- set_bit(STRIPE_OP_PREXOR, &sh->ops.complete);
}
static struct dma_async_tx_descriptor *
/* existing parity data subtracted */
struct page *xor_dest = xor_srcs[count++] = sh->dev[pd_idx].page;
- pr_debug("%s: stripe %llu\n", __FUNCTION__,
+ pr_debug("%s: stripe %llu\n", __func__,
(unsigned long long)sh->sector);
for (i = disks; i--; ) {
struct r5dev *dev = &sh->dev[i];
/* Only process blocks that are known to be uptodate */
- if (dev->towrite && test_bit(R5_Wantprexor, &dev->flags))
+ if (test_bit(R5_Wantdrain, &dev->flags))
xor_srcs[count++] = dev->page;
}
ops_run_biodrain(struct stripe_head *sh, struct dma_async_tx_descriptor *tx)
{
int disks = sh->disks;
- int pd_idx = sh->pd_idx, i;
-
- /* check if prexor is active which means only process blocks
- * that are part of a read-modify-write (Wantprexor)
- */
- int prexor = test_bit(STRIPE_OP_PREXOR, &sh->ops.pending);
+ int i;
- pr_debug("%s: stripe %llu\n", __FUNCTION__,
+ pr_debug("%s: stripe %llu\n", __func__,
(unsigned long long)sh->sector);
for (i = disks; i--; ) {
struct r5dev *dev = &sh->dev[i];
struct bio *chosen;
- int towrite;
-
- towrite = 0;
- if (prexor) { /* rmw */
- if (dev->towrite &&
- test_bit(R5_Wantprexor, &dev->flags))
- towrite = 1;
- } else { /* rcw */
- if (i != pd_idx && dev->towrite &&
- test_bit(R5_LOCKED, &dev->flags))
- towrite = 1;
- }
- if (towrite) {
+ if (test_and_clear_bit(R5_Wantdrain, &dev->flags)) {
struct bio *wbi;
spin_lock(&sh->lock);
static void ops_complete_postxor(void *stripe_head_ref)
{
struct stripe_head *sh = stripe_head_ref;
-
- pr_debug("%s: stripe %llu\n", __FUNCTION__,
- (unsigned long long)sh->sector);
-
- set_bit(STRIPE_OP_POSTXOR, &sh->ops.complete);
- set_bit(STRIPE_HANDLE, &sh->state);
- release_stripe(sh);
-}
-
-static void ops_complete_write(void *stripe_head_ref)
-{
- struct stripe_head *sh = stripe_head_ref;
int disks = sh->disks, i, pd_idx = sh->pd_idx;
- pr_debug("%s: stripe %llu\n", __FUNCTION__,
+ pr_debug("%s: stripe %llu\n", __func__,
(unsigned long long)sh->sector);
for (i = disks; i--; ) {
set_bit(R5_UPTODATE, &dev->flags);
}
- set_bit(STRIPE_OP_BIODRAIN, &sh->ops.complete);
- set_bit(STRIPE_OP_POSTXOR, &sh->ops.complete);
+ if (sh->reconstruct_state == reconstruct_state_drain_run)
+ sh->reconstruct_state = reconstruct_state_drain_result;
+ else if (sh->reconstruct_state == reconstruct_state_prexor_drain_run)
+ sh->reconstruct_state = reconstruct_state_prexor_drain_result;
+ else {
+ BUG_ON(sh->reconstruct_state != reconstruct_state_run);
+ sh->reconstruct_state = reconstruct_state_result;
+ }
set_bit(STRIPE_HANDLE, &sh->state);
release_stripe(sh);
int count = 0, pd_idx = sh->pd_idx, i;
struct page *xor_dest;
- int prexor = test_bit(STRIPE_OP_PREXOR, &sh->ops.pending);
+ int prexor = 0;
unsigned long flags;
- dma_async_tx_callback callback;
- pr_debug("%s: stripe %llu\n", __FUNCTION__,
+ pr_debug("%s: stripe %llu\n", __func__,
(unsigned long long)sh->sector);
/* check if prexor is active which means only process blocks
* that are part of a read-modify-write (written)
*/
- if (prexor) {
+ if (sh->reconstruct_state == reconstruct_state_prexor_drain_run) {
+ prexor = 1;
xor_dest = xor_srcs[count++] = sh->dev[pd_idx].page;
for (i = disks; i--; ) {
struct r5dev *dev = &sh->dev[i];
}
}
- /* check whether this postxor is part of a write */
- callback = test_bit(STRIPE_OP_BIODRAIN, &sh->ops.pending) ?
- ops_complete_write : ops_complete_postxor;
-
/* 1/ if we prexor'd then the dest is reused as a source
* 2/ if we did not prexor then we are redoing the parity
* set ASYNC_TX_XOR_DROP_DST and ASYNC_TX_XOR_ZERO_DST
if (unlikely(count == 1)) {
flags &= ~(ASYNC_TX_XOR_DROP_DST | ASYNC_TX_XOR_ZERO_DST);
tx = async_memcpy(xor_dest, xor_srcs[0], 0, 0, STRIPE_SIZE,
- flags, tx, callback, sh);
+ flags, tx, ops_complete_postxor, sh);
} else
tx = async_xor(xor_dest, xor_srcs, 0, count, STRIPE_SIZE,
- flags, tx, callback, sh);
+ flags, tx, ops_complete_postxor, sh);
}
static void ops_complete_check(void *stripe_head_ref)
{
struct stripe_head *sh = stripe_head_ref;
- int pd_idx = sh->pd_idx;
- pr_debug("%s: stripe %llu\n", __FUNCTION__,
+ pr_debug("%s: stripe %llu\n", __func__,
(unsigned long long)sh->sector);
- if (test_and_clear_bit(STRIPE_OP_MOD_DMA_CHECK, &sh->ops.pending) &&
- sh->ops.zero_sum_result == 0)
- set_bit(R5_UPTODATE, &sh->dev[pd_idx].flags);
-
- set_bit(STRIPE_OP_CHECK, &sh->ops.complete);
+ sh->check_state = check_state_check_result;
set_bit(STRIPE_HANDLE, &sh->state);
release_stripe(sh);
}
int count = 0, pd_idx = sh->pd_idx, i;
struct page *xor_dest = xor_srcs[count++] = sh->dev[pd_idx].page;
- pr_debug("%s: stripe %llu\n", __FUNCTION__,
+ pr_debug("%s: stripe %llu\n", __func__,
(unsigned long long)sh->sector);
for (i = disks; i--; ) {
tx = async_xor_zero_sum(xor_dest, xor_srcs, 0, count, STRIPE_SIZE,
&sh->ops.zero_sum_result, 0, NULL, NULL, NULL);
- if (tx)
- set_bit(STRIPE_OP_MOD_DMA_CHECK, &sh->ops.pending);
- else
- clear_bit(STRIPE_OP_MOD_DMA_CHECK, &sh->ops.pending);
-
atomic_inc(&sh->count);
tx = async_trigger_callback(ASYNC_TX_DEP_ACK | ASYNC_TX_ACK, tx,
ops_complete_check, sh);
}
-static void raid5_run_ops(struct stripe_head *sh, unsigned long pending)
+static void raid5_run_ops(struct stripe_head *sh, unsigned long ops_request)
{
int overlap_clear = 0, i, disks = sh->disks;
struct dma_async_tx_descriptor *tx = NULL;
- if (test_bit(STRIPE_OP_BIOFILL, &pending)) {
+ if (test_bit(STRIPE_OP_BIOFILL, &ops_request)) {
ops_run_biofill(sh);
overlap_clear++;
}
- if (test_bit(STRIPE_OP_COMPUTE_BLK, &pending))
- tx = ops_run_compute5(sh, pending);
+ if (test_bit(STRIPE_OP_COMPUTE_BLK, &ops_request)) {
+ tx = ops_run_compute5(sh);
+ /* terminate the chain if postxor is not set to be run */
+ if (tx && !test_bit(STRIPE_OP_POSTXOR, &ops_request))
+ async_tx_ack(tx);
+ }
- if (test_bit(STRIPE_OP_PREXOR, &pending))
+ if (test_bit(STRIPE_OP_PREXOR, &ops_request))
tx = ops_run_prexor(sh, tx);
- if (test_bit(STRIPE_OP_BIODRAIN, &pending)) {
+ if (test_bit(STRIPE_OP_BIODRAIN, &ops_request)) {
tx = ops_run_biodrain(sh, tx);
overlap_clear++;
}
- if (test_bit(STRIPE_OP_POSTXOR, &pending))
+ if (test_bit(STRIPE_OP_POSTXOR, &ops_request))
ops_run_postxor(sh, tx);
- if (test_bit(STRIPE_OP_CHECK, &pending))
+ if (test_bit(STRIPE_OP_CHECK, &ops_request))
ops_run_check(sh);
- if (test_bit(STRIPE_OP_IO, &pending))
- ops_run_io(sh);
-
if (overlap_clear)
for (i = disks; i--; ) {
struct r5dev *dev = &sh->dev[i];
struct stripe_head *osh, *nsh;
LIST_HEAD(newstripes);
struct disk_info *ndisks;
- int err = 0;
+ int err;
struct kmem_cache *sc;
int i;
if (newsize <= conf->pool_size)
return 0; /* never bother to shrink */
- md_allow_write(conf->mddev);
+ err = md_allow_write(conf->mddev);
+ if (err)
+ return err;
/* Step 1 */
sc = kmem_cache_create(conf->cache_name[1-conf->active_name],
set_bit(R5_UPTODATE, &sh->dev[i].flags);
if (test_bit(R5_ReadError, &sh->dev[i].flags)) {
rdev = conf->disks[i].rdev;
- printk(KERN_INFO "raid5:%s: read error corrected (%lu sectors at %llu on %s)\n",
- mdname(conf->mddev), STRIPE_SECTORS,
- (unsigned long long)sh->sector + rdev->data_offset,
- bdevname(rdev->bdev, b));
+ printk_rl(KERN_INFO "raid5:%s: read error corrected"
+ " (%lu sectors at %llu on %s)\n",
+ mdname(conf->mddev), STRIPE_SECTORS,
+ (unsigned long long)(sh->sector
+ + rdev->data_offset),
+ bdevname(rdev->bdev, b));
clear_bit(R5_ReadError, &sh->dev[i].flags);
clear_bit(R5_ReWrite, &sh->dev[i].flags);
}
clear_bit(R5_UPTODATE, &sh->dev[i].flags);
atomic_inc(&rdev->read_errors);
if (conf->mddev->degraded)
- printk(KERN_WARNING "raid5:%s: read error not correctable (sector %llu on %s).\n",
- mdname(conf->mddev),
- (unsigned long long)sh->sector + rdev->data_offset,
- bdn);
+ printk_rl(KERN_WARNING
+ "raid5:%s: read error not correctable "
+ "(sector %llu on %s).\n",
+ mdname(conf->mddev),
+ (unsigned long long)(sh->sector
+ + rdev->data_offset),
+ bdn);
else if (test_bit(R5_ReWrite, &sh->dev[i].flags))
/* Oh, no!!! */
- printk(KERN_WARNING "raid5:%s: read error NOT corrected!! (sector %llu on %s).\n",
- mdname(conf->mddev),
- (unsigned long long)sh->sector + rdev->data_offset,
- bdn);
+ printk_rl(KERN_WARNING
+ "raid5:%s: read error NOT corrected!! "
+ "(sector %llu on %s).\n",
+ mdname(conf->mddev),
+ (unsigned long long)(sh->sector
+ + rdev->data_offset),
+ bdn);
else if (atomic_read(&rdev->read_errors)
> conf->max_nr_stripes)
printk(KERN_WARNING
release_stripe(sh);
}
-static void raid5_end_write_request (struct bio *bi, int error)
+static void raid5_end_write_request(struct bio *bi, int error)
{
struct stripe_head *sh = bi->bi_private;
raid5_conf_t *conf = sh->raid_conf;
static sector_t compute_blocknr(struct stripe_head *sh, int i);
-static void raid5_build_block (struct stripe_head *sh, int i)
+static void raid5_build_block(struct stripe_head *sh, int i)
{
struct r5dev *dev = &sh->dev[i];
/*
* if recovery was running, make sure it aborts.
*/
- set_bit(MD_RECOVERY_ERR, &mddev->recovery);
+ set_bit(MD_RECOVERY_INTR, &mddev->recovery);
}
set_bit(Faulty, &rdev->flags);
- printk (KERN_ALERT
- "raid5: Disk failure on %s, disabling device."
- " Operation continuing on %d devices\n",
- bdevname(rdev->bdev,b), conf->raid_disks - mddev->degraded);
+ printk(KERN_ALERT
+ "raid5: Disk failure on %s, disabling device.\n"
+ "raid5: Operation continuing on %d devices.\n",
+ bdevname(rdev->bdev,b), conf->raid_disks - mddev->degraded);
}
}
*dd_idx = (*pd_idx + 2 + *dd_idx) % raid_disks;
break;
default:
- printk (KERN_CRIT "raid6: unsupported algorithm %d\n",
- conf->algorithm);
+ printk(KERN_CRIT "raid6: unsupported algorithm %d\n",
+ conf->algorithm);
}
break;
}
}
break;
default:
- printk (KERN_CRIT "raid6: unsupported algorithm %d\n",
- conf->algorithm);
+ printk(KERN_CRIT "raid6: unsupported algorithm %d\n",
+ conf->algorithm);
}
break;
}
chunk_number = stripe * data_disks + i;
r_sector = (sector_t)chunk_number * sectors_per_chunk + chunk_offset;
- check = raid5_compute_sector (r_sector, raid_disks, data_disks, &dummy1, &dummy2, conf);
+ check = raid5_compute_sector(r_sector, raid_disks, data_disks, &dummy1, &dummy2, conf);
if (check != sh->sector || dummy1 != dd_idx || dummy2 != sh->pd_idx) {
printk(KERN_ERR "compute_blocknr: map not correct\n");
return 0;
}
}
-static int
-handle_write_operations5(struct stripe_head *sh, int rcw, int expand)
+static void
+schedule_reconstruction5(struct stripe_head *sh, struct stripe_head_state *s,
+ int rcw, int expand)
{
int i, pd_idx = sh->pd_idx, disks = sh->disks;
- int locked = 0;
if (rcw) {
/* if we are not expanding this is a proper write request, and
* stripe cache
*/
if (!expand) {
- set_bit(STRIPE_OP_BIODRAIN, &sh->ops.pending);
- sh->ops.count++;
- }
+ sh->reconstruct_state = reconstruct_state_drain_run;
+ set_bit(STRIPE_OP_BIODRAIN, &s->ops_request);
+ } else
+ sh->reconstruct_state = reconstruct_state_run;
- set_bit(STRIPE_OP_POSTXOR, &sh->ops.pending);
- sh->ops.count++;
+ set_bit(STRIPE_OP_POSTXOR, &s->ops_request);
for (i = disks; i--; ) {
struct r5dev *dev = &sh->dev[i];
if (dev->towrite) {
set_bit(R5_LOCKED, &dev->flags);
+ set_bit(R5_Wantdrain, &dev->flags);
if (!expand)
clear_bit(R5_UPTODATE, &dev->flags);
- locked++;
+ s->locked++;
}
}
+ if (s->locked + 1 == disks)
+ if (!test_and_set_bit(STRIPE_FULL_WRITE, &sh->state))
+ atomic_inc(&sh->raid_conf->pending_full_writes);
} else {
BUG_ON(!(test_bit(R5_UPTODATE, &sh->dev[pd_idx].flags) ||
test_bit(R5_Wantcompute, &sh->dev[pd_idx].flags)));
- set_bit(STRIPE_OP_PREXOR, &sh->ops.pending);
- set_bit(STRIPE_OP_BIODRAIN, &sh->ops.pending);
- set_bit(STRIPE_OP_POSTXOR, &sh->ops.pending);
-
- sh->ops.count += 3;
+ sh->reconstruct_state = reconstruct_state_prexor_drain_run;
+ set_bit(STRIPE_OP_PREXOR, &s->ops_request);
+ set_bit(STRIPE_OP_BIODRAIN, &s->ops_request);
+ set_bit(STRIPE_OP_POSTXOR, &s->ops_request);
for (i = disks; i--; ) {
struct r5dev *dev = &sh->dev[i];
if (i == pd_idx)
continue;
- /* For a read-modify write there may be blocks that are
- * locked for reading while others are ready to be
- * written so we distinguish these blocks by the
- * R5_Wantprexor bit
- */
if (dev->towrite &&
(test_bit(R5_UPTODATE, &dev->flags) ||
- test_bit(R5_Wantcompute, &dev->flags))) {
- set_bit(R5_Wantprexor, &dev->flags);
+ test_bit(R5_Wantcompute, &dev->flags))) {
+ set_bit(R5_Wantdrain, &dev->flags);
set_bit(R5_LOCKED, &dev->flags);
clear_bit(R5_UPTODATE, &dev->flags);
- locked++;
+ s->locked++;
}
}
}
*/
set_bit(R5_LOCKED, &sh->dev[pd_idx].flags);
clear_bit(R5_UPTODATE, &sh->dev[pd_idx].flags);
- locked++;
+ s->locked++;
- pr_debug("%s: stripe %llu locked: %d pending: %lx\n",
- __FUNCTION__, (unsigned long long)sh->sector,
- locked, sh->ops.pending);
-
- return locked;
+ pr_debug("%s: stripe %llu locked: %d ops_request: %lx\n",
+ __func__, (unsigned long long)sh->sector,
+ s->locked, s->ops_request);
}
/*
if (*bip)
bi->bi_next = *bip;
*bip = bi;
- bi->bi_phys_segments ++;
+ bi->bi_phys_segments++;
spin_unlock_irq(&conf->device_lock);
spin_unlock(&sh->lock);
}
static void
-handle_requests_to_failed_array(raid5_conf_t *conf, struct stripe_head *sh,
+handle_failed_stripe(raid5_conf_t *conf, struct stripe_head *sh,
struct stripe_head_state *s, int disks,
struct bio **return_bi)
{
sh->dev[i].sector + STRIPE_SECTORS) {
struct bio *nextbi = r5_next_bio(bi, sh->dev[i].sector);
clear_bit(BIO_UPTODATE, &bi->bi_flags);
- if (--bi->bi_phys_segments == 0) {
+ if (!raid5_dec_bi_phys_segments(bi)) {
md_write_end(conf->mddev);
bi->bi_next = *return_bi;
*return_bi = bi;
sh->dev[i].sector + STRIPE_SECTORS) {
struct bio *bi2 = r5_next_bio(bi, sh->dev[i].sector);
clear_bit(BIO_UPTODATE, &bi->bi_flags);
- if (--bi->bi_phys_segments == 0) {
+ if (!raid5_dec_bi_phys_segments(bi)) {
md_write_end(conf->mddev);
bi->bi_next = *return_bi;
*return_bi = bi;
struct bio *nextbi =
r5_next_bio(bi, sh->dev[i].sector);
clear_bit(BIO_UPTODATE, &bi->bi_flags);
- if (--bi->bi_phys_segments == 0) {
+ if (!raid5_dec_bi_phys_segments(bi)) {
bi->bi_next = *return_bi;
*return_bi = bi;
}
STRIPE_SECTORS, 0, 0);
}
+ if (test_and_clear_bit(STRIPE_FULL_WRITE, &sh->state))
+ if (atomic_dec_and_test(&conf->pending_full_writes))
+ md_wakeup_thread(conf->mddev->thread);
}
-/* __handle_issuing_new_read_requests5 - returns 0 if there are no more disks
- * to process
+/* fetch_block5 - checks the given member device to see if its data needs
+ * to be read or computed to satisfy a request.
+ *
+ * Returns 1 when no more member devices need to be checked, otherwise returns
+ * 0 to tell the loop in handle_stripe_fill5 to continue
*/
-static int __handle_issuing_new_read_requests5(struct stripe_head *sh,
- struct stripe_head_state *s, int disk_idx, int disks)
+static int fetch_block5(struct stripe_head *sh, struct stripe_head_state *s,
+ int disk_idx, int disks)
{
struct r5dev *dev = &sh->dev[disk_idx];
struct r5dev *failed_dev = &sh->dev[s->failed_num];
- /* don't schedule compute operations or reads on the parity block while
- * a check is in flight
- */
- if ((disk_idx == sh->pd_idx) &&
- test_bit(STRIPE_OP_CHECK, &sh->ops.pending))
- return ~0;
-
/* is the data in this block needed, and can we get it? */
if (!test_bit(R5_LOCKED, &dev->flags) &&
- !test_bit(R5_UPTODATE, &dev->flags) && (dev->toread ||
- (dev->towrite && !test_bit(R5_OVERWRITE, &dev->flags)) ||
- s->syncing || s->expanding || (s->failed &&
- (failed_dev->toread || (failed_dev->towrite &&
- !test_bit(R5_OVERWRITE, &failed_dev->flags)
- ))))) {
- /* 1/ We would like to get this block, possibly by computing it,
- * but we might not be able to.
- *
- * 2/ Since parity check operations potentially make the parity
- * block !uptodate it will need to be refreshed before any
- * compute operations on data disks are scheduled.
- *
- * 3/ We hold off parity block re-reads until check operations
- * have quiesced.
+ !test_bit(R5_UPTODATE, &dev->flags) &&
+ (dev->toread ||
+ (dev->towrite && !test_bit(R5_OVERWRITE, &dev->flags)) ||
+ s->syncing || s->expanding ||
+ (s->failed &&
+ (failed_dev->toread ||
+ (failed_dev->towrite &&
+ !test_bit(R5_OVERWRITE, &failed_dev->flags)))))) {
+ /* We would like to get this block, possibly by computing it,
+ * otherwise read it if the backing disk is insync
*/
if ((s->uptodate == disks - 1) &&
- !test_bit(STRIPE_OP_CHECK, &sh->ops.pending)) {
- set_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.pending);
+ (s->failed && disk_idx == s->failed_num)) {
+ set_bit(STRIPE_COMPUTE_RUN, &sh->state);
+ set_bit(STRIPE_OP_COMPUTE_BLK, &s->ops_request);
set_bit(R5_Wantcompute, &dev->flags);
sh->ops.target = disk_idx;
s->req_compute = 1;
- sh->ops.count++;
/* Careful: from this point on 'uptodate' is in the eye
* of raid5_run_ops which services 'compute' operations
* before writes. R5_Wantcompute flags a block that will
* subsequent operation.
*/
s->uptodate++;
- return 0; /* uptodate + compute == disks */
- } else if ((s->uptodate < disks - 1) &&
- test_bit(R5_Insync, &dev->flags)) {
- /* Note: we hold off compute operations while checks are
- * in flight, but we still prefer 'compute' over 'read'
- * hence we only read if (uptodate < * disks-1)
- */
+ return 1; /* uptodate + compute == disks */
+ } else if (test_bit(R5_Insync, &dev->flags)) {
set_bit(R5_LOCKED, &dev->flags);
set_bit(R5_Wantread, &dev->flags);
- if (!test_and_set_bit(STRIPE_OP_IO, &sh->ops.pending))
- sh->ops.count++;
s->locked++;
pr_debug("Reading block %d (sync=%d)\n", disk_idx,
s->syncing);
}
}
- return ~0;
+ return 0;
}
-static void handle_issuing_new_read_requests5(struct stripe_head *sh,
+/**
+ * handle_stripe_fill5 - read or compute data to satisfy pending requests.
+ */
+static void handle_stripe_fill5(struct stripe_head *sh,
struct stripe_head_state *s, int disks)
{
int i;
- /* Clear completed compute operations. Parity recovery
- * (STRIPE_OP_MOD_REPAIR_PD) implies a write-back which is handled
- * later on in this routine
- */
- if (test_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.complete) &&
- !test_bit(STRIPE_OP_MOD_REPAIR_PD, &sh->ops.pending)) {
- clear_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.complete);
- clear_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.ack);
- clear_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.pending);
- }
-
/* look for blocks to read/compute, skip this if a compute
* is already in flight, or if the stripe contents are in the
* midst of changing due to a write
*/
- if (!test_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.pending) &&
- !test_bit(STRIPE_OP_PREXOR, &sh->ops.pending) &&
- !test_bit(STRIPE_OP_POSTXOR, &sh->ops.pending)) {
+ if (!test_bit(STRIPE_COMPUTE_RUN, &sh->state) && !sh->check_state &&
+ !sh->reconstruct_state)
for (i = disks; i--; )
- if (__handle_issuing_new_read_requests5(
- sh, s, i, disks) == 0)
+ if (fetch_block5(sh, s, i, disks))
break;
- }
set_bit(STRIPE_HANDLE, &sh->state);
}
-static void handle_issuing_new_read_requests6(struct stripe_head *sh,
+static void handle_stripe_fill6(struct stripe_head *sh,
struct stripe_head_state *s, struct r6_state *r6s,
int disks)
{
/* we would like to get this block, possibly
* by computing it, but we might not be able to
*/
- if (s->uptodate == disks-1) {
+ if ((s->uptodate == disks - 1) &&
+ (s->failed && (i == r6s->failed_num[0] ||
+ i == r6s->failed_num[1]))) {
pr_debug("Computing stripe %llu block %d\n",
(unsigned long long)sh->sector, i);
compute_block_1(sh, i, 0);
}
-/* handle_completed_write_requests
+/* handle_stripe_clean_event
* any written block on an uptodate or failed drive can be returned.
* Note that if we 'wrote' to a failed drive, it will be UPTODATE, but
* never LOCKED, so we don't need to test 'failed' directly.
*/
-static void handle_completed_write_requests(raid5_conf_t *conf,
+static void handle_stripe_clean_event(raid5_conf_t *conf,
struct stripe_head *sh, int disks, struct bio **return_bi)
{
int i;
while (wbi && wbi->bi_sector <
dev->sector + STRIPE_SECTORS) {
wbi2 = r5_next_bio(wbi, dev->sector);
- if (--wbi->bi_phys_segments == 0) {
+ if (!raid5_dec_bi_phys_segments(wbi)) {
md_write_end(conf->mddev);
wbi->bi_next = *return_bi;
*return_bi = wbi;
0);
}
}
+
+ if (test_and_clear_bit(STRIPE_FULL_WRITE, &sh->state))
+ if (atomic_dec_and_test(&conf->pending_full_writes))
+ md_wakeup_thread(conf->mddev->thread);
}
-static void handle_issuing_new_write_requests5(raid5_conf_t *conf,
+static void handle_stripe_dirtying5(raid5_conf_t *conf,
struct stripe_head *sh, struct stripe_head_state *s, int disks)
{
int rmw = 0, rcw = 0, i;
"%d for r-m-w\n", i);
set_bit(R5_LOCKED, &dev->flags);
set_bit(R5_Wantread, &dev->flags);
- if (!test_and_set_bit(
- STRIPE_OP_IO, &sh->ops.pending))
- sh->ops.count++;
s->locked++;
} else {
set_bit(STRIPE_DELAYED, &sh->state);
"%d for Reconstruct\n", i);
set_bit(R5_LOCKED, &dev->flags);
set_bit(R5_Wantread, &dev->flags);
- if (!test_and_set_bit(
- STRIPE_OP_IO, &sh->ops.pending))
- sh->ops.count++;
s->locked++;
} else {
set_bit(STRIPE_DELAYED, &sh->state);
* simultaneously. If this is not the case then new writes need to be
* held off until the compute completes.
*/
- if ((s->req_compute ||
- !test_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.pending)) &&
- (s->locked == 0 && (rcw == 0 || rmw == 0) &&
- !test_bit(STRIPE_BIT_DELAY, &sh->state)))
- s->locked += handle_write_operations5(sh, rcw == 0, 0);
+ if ((s->req_compute || !test_bit(STRIPE_COMPUTE_RUN, &sh->state)) &&
+ (s->locked == 0 && (rcw == 0 || rmw == 0) &&
+ !test_bit(STRIPE_BIT_DELAY, &sh->state)))
+ schedule_reconstruction5(sh, s, rcw == 0, 0);
}
-static void handle_issuing_new_write_requests6(raid5_conf_t *conf,
+static void handle_stripe_dirtying6(raid5_conf_t *conf,
struct stripe_head *sh, struct stripe_head_state *s,
struct r6_state *r6s, int disks)
{
s->locked++;
set_bit(R5_Wantwrite, &sh->dev[i].flags);
}
+ if (s->locked == disks)
+ if (!test_and_set_bit(STRIPE_FULL_WRITE, &sh->state))
+ atomic_inc(&conf->pending_full_writes);
/* after a RECONSTRUCT_WRITE, the stripe MUST be in-sync */
set_bit(STRIPE_INSYNC, &sh->state);
static void handle_parity_checks5(raid5_conf_t *conf, struct stripe_head *sh,
struct stripe_head_state *s, int disks)
{
+ struct r5dev *dev = NULL;
+
set_bit(STRIPE_HANDLE, &sh->state);
- /* Take one of the following actions:
- * 1/ start a check parity operation if (uptodate == disks)
- * 2/ finish a check parity operation and act on the result
- * 3/ skip to the writeback section if we previously
- * initiated a recovery operation
- */
- if (s->failed == 0 &&
- !test_bit(STRIPE_OP_MOD_REPAIR_PD, &sh->ops.pending)) {
- if (!test_and_set_bit(STRIPE_OP_CHECK, &sh->ops.pending)) {
+
+ switch (sh->check_state) {
+ case check_state_idle:
+ /* start a new check operation if there are no failures */
+ if (s->failed == 0) {
BUG_ON(s->uptodate != disks);
+ sh->check_state = check_state_run;
+ set_bit(STRIPE_OP_CHECK, &s->ops_request);
clear_bit(R5_UPTODATE, &sh->dev[sh->pd_idx].flags);
- sh->ops.count++;
s->uptodate--;
- } else if (
- test_and_clear_bit(STRIPE_OP_CHECK, &sh->ops.complete)) {
- clear_bit(STRIPE_OP_CHECK, &sh->ops.ack);
- clear_bit(STRIPE_OP_CHECK, &sh->ops.pending);
-
- if (sh->ops.zero_sum_result == 0)
- /* parity is correct (on disc,
- * not in buffer any more)
- */
- set_bit(STRIPE_INSYNC, &sh->state);
- else {
- conf->mddev->resync_mismatches +=
- STRIPE_SECTORS;
- if (test_bit(
- MD_RECOVERY_CHECK, &conf->mddev->recovery))
- /* don't try to repair!! */
- set_bit(STRIPE_INSYNC, &sh->state);
- else {
- set_bit(STRIPE_OP_COMPUTE_BLK,
- &sh->ops.pending);
- set_bit(STRIPE_OP_MOD_REPAIR_PD,
- &sh->ops.pending);
- set_bit(R5_Wantcompute,
- &sh->dev[sh->pd_idx].flags);
- sh->ops.target = sh->pd_idx;
- sh->ops.count++;
- s->uptodate++;
- }
- }
+ break;
}
- }
-
- /* check if we can clear a parity disk reconstruct */
- if (test_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.complete) &&
- test_bit(STRIPE_OP_MOD_REPAIR_PD, &sh->ops.pending)) {
-
- clear_bit(STRIPE_OP_MOD_REPAIR_PD, &sh->ops.pending);
- clear_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.complete);
- clear_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.ack);
- clear_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.pending);
- }
+ dev = &sh->dev[s->failed_num];
+ /* fall through */
+ case check_state_compute_result:
+ sh->check_state = check_state_idle;
+ if (!dev)
+ dev = &sh->dev[sh->pd_idx];
+
+ /* check that a write has not made the stripe insync */
+ if (test_bit(STRIPE_INSYNC, &sh->state))
+ break;
- /* Wait for check parity and compute block operations to complete
- * before write-back
- */
- if (!test_bit(STRIPE_INSYNC, &sh->state) &&
- !test_bit(STRIPE_OP_CHECK, &sh->ops.pending) &&
- !test_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.pending)) {
- struct r5dev *dev;
/* either failed parity check, or recovery is happening */
- if (s->failed == 0)
- s->failed_num = sh->pd_idx;
- dev = &sh->dev[s->failed_num];
BUG_ON(!test_bit(R5_UPTODATE, &dev->flags));
BUG_ON(s->uptodate != disks);
set_bit(R5_LOCKED, &dev->flags);
+ s->locked++;
set_bit(R5_Wantwrite, &dev->flags);
- if (!test_and_set_bit(STRIPE_OP_IO, &sh->ops.pending))
- sh->ops.count++;
clear_bit(STRIPE_DEGRADED, &sh->state);
- s->locked++;
set_bit(STRIPE_INSYNC, &sh->state);
+ break;
+ case check_state_run:
+ break; /* we will be called again upon completion */
+ case check_state_check_result:
+ sh->check_state = check_state_idle;
+
+ /* if a failure occurred during the check operation, leave
+ * STRIPE_INSYNC not set and let the stripe be handled again
+ */
+ if (s->failed)
+ break;
+
+ /* handle a successful check operation, if parity is correct
+ * we are done. Otherwise update the mismatch count and repair
+ * parity if !MD_RECOVERY_CHECK
+ */
+ if (sh->ops.zero_sum_result == 0)
+ /* parity is correct (on disc,
+ * not in buffer any more)
+ */
+ set_bit(STRIPE_INSYNC, &sh->state);
+ else {
+ conf->mddev->resync_mismatches += STRIPE_SECTORS;
+ if (test_bit(MD_RECOVERY_CHECK, &conf->mddev->recovery))
+ /* don't try to repair!! */
+ set_bit(STRIPE_INSYNC, &sh->state);
+ else {
+ sh->check_state = check_state_compute_run;
+ set_bit(STRIPE_COMPUTE_RUN, &sh->state);
+ set_bit(STRIPE_OP_COMPUTE_BLK, &s->ops_request);
+ set_bit(R5_Wantcompute,
+ &sh->dev[sh->pd_idx].flags);
+ sh->ops.target = sh->pd_idx;
+ s->uptodate++;
+ }
+ }
+ break;
+ case check_state_compute_run:
+ break;
+ default:
+ printk(KERN_ERR "%s: unknown check_state: %d sector: %llu\n",
+ __func__, sh->check_state,
+ (unsigned long long) sh->sector);
+ BUG();
}
}
}
}
+
/*
* handle_stripe - do things to a stripe.
*
*
*/
-static void handle_stripe5(struct stripe_head *sh)
+static bool handle_stripe5(struct stripe_head *sh)
{
raid5_conf_t *conf = sh->raid_conf;
int disks = sh->disks, i;
struct bio *return_bi = NULL;
struct stripe_head_state s;
struct r5dev *dev;
- unsigned long pending = 0;
+ mdk_rdev_t *blocked_rdev = NULL;
+ int prexor;
memset(&s, 0, sizeof(s));
- pr_debug("handling stripe %llu, state=%#lx cnt=%d, pd_idx=%d "
- "ops=%lx:%lx:%lx\n", (unsigned long long)sh->sector, sh->state,
- atomic_read(&sh->count), sh->pd_idx,
- sh->ops.pending, sh->ops.ack, sh->ops.complete);
+ pr_debug("handling stripe %llu, state=%#lx cnt=%d, pd_idx=%d check:%d "
+ "reconstruct:%d\n", (unsigned long long)sh->sector, sh->state,
+ atomic_read(&sh->count), sh->pd_idx, sh->check_state,
+ sh->reconstruct_state);
spin_lock(&sh->lock);
clear_bit(STRIPE_HANDLE, &sh->state);
s.syncing = test_bit(STRIPE_SYNCING, &sh->state);
s.expanding = test_bit(STRIPE_EXPAND_SOURCE, &sh->state);
s.expanded = test_bit(STRIPE_EXPAND_READY, &sh->state);
- /* Now to look around and see what can be done */
+ /* Now to look around and see what can be done */
rcu_read_lock();
for (i=disks; i--; ) {
mdk_rdev_t *rdev;
/* maybe we can request a biofill operation
*
* new wantfill requests are only permitted while
- * STRIPE_OP_BIOFILL is clear
+ * ops_complete_biofill is guaranteed to be inactive
*/
if (test_bit(R5_UPTODATE, &dev->flags) && dev->toread &&
- !test_bit(STRIPE_OP_BIOFILL, &sh->ops.pending))
+ !test_bit(STRIPE_BIOFILL_RUN, &sh->state))
set_bit(R5_Wantfill, &dev->flags);
/* now count some things */
if (dev->written)
s.written++;
rdev = rcu_dereference(conf->disks[i].rdev);
+ if (blocked_rdev == NULL &&
+ rdev && unlikely(test_bit(Blocked, &rdev->flags))) {
+ blocked_rdev = rdev;
+ atomic_inc(&rdev->nr_pending);
+ }
if (!rdev || !test_bit(In_sync, &rdev->flags)) {
/* The ReadError flag will just be confusing now */
clear_bit(R5_ReadError, &dev->flags);
}
rcu_read_unlock();
- if (s.to_fill && !test_and_set_bit(STRIPE_OP_BIOFILL, &sh->ops.pending))
- sh->ops.count++;
+ if (unlikely(blocked_rdev)) {
+ if (s.syncing || s.expanding || s.expanded ||
+ s.to_write || s.written) {
+ set_bit(STRIPE_HANDLE, &sh->state);
+ goto unlock;
+ }
+ /* There is nothing for the blocked_rdev to block */
+ rdev_dec_pending(blocked_rdev, conf->mddev);
+ blocked_rdev = NULL;
+ }
+
+ if (s.to_fill && !test_bit(STRIPE_BIOFILL_RUN, &sh->state)) {
+ set_bit(STRIPE_OP_BIOFILL, &s.ops_request);
+ set_bit(STRIPE_BIOFILL_RUN, &sh->state);
+ }
pr_debug("locked=%d uptodate=%d to_read=%d"
" to_write=%d failed=%d failed_num=%d\n",
* need to be failed
*/
if (s.failed > 1 && s.to_read+s.to_write+s.written)
- handle_requests_to_failed_array(conf, sh, &s, disks,
- &return_bi);
+ handle_failed_stripe(conf, sh, &s, disks, &return_bi);
if (s.failed > 1 && s.syncing) {
md_done_sync(conf->mddev, STRIPE_SECTORS,0);
clear_bit(STRIPE_SYNCING, &sh->state);
!test_bit(R5_LOCKED, &dev->flags) &&
test_bit(R5_UPTODATE, &dev->flags)) ||
(s.failed == 1 && s.failed_num == sh->pd_idx)))
- handle_completed_write_requests(conf, sh, disks, &return_bi);
+ handle_stripe_clean_event(conf, sh, disks, &return_bi);
/* Now we might consider reading some blocks, either to check/generate
* parity, or to satisfy requests
* or to load a block that is being partially written.
*/
if (s.to_read || s.non_overwrite ||
- (s.syncing && (s.uptodate + s.compute < disks)) || s.expanding ||
- test_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.pending))
- handle_issuing_new_read_requests5(sh, &s, disks);
+ (s.syncing && (s.uptodate + s.compute < disks)) || s.expanding)
+ handle_stripe_fill5(sh, &s, disks);
/* Now we check to see if any write operations have recently
* completed
*/
-
- /* leave prexor set until postxor is done, allows us to distinguish
- * a rmw from a rcw during biodrain
- */
- if (test_bit(STRIPE_OP_PREXOR, &sh->ops.complete) &&
- test_bit(STRIPE_OP_POSTXOR, &sh->ops.complete)) {
-
- clear_bit(STRIPE_OP_PREXOR, &sh->ops.complete);
- clear_bit(STRIPE_OP_PREXOR, &sh->ops.ack);
- clear_bit(STRIPE_OP_PREXOR, &sh->ops.pending);
-
- for (i = disks; i--; )
- clear_bit(R5_Wantprexor, &sh->dev[i].flags);
- }
-
- /* if only POSTXOR is set then this is an 'expand' postxor */
- if (test_bit(STRIPE_OP_BIODRAIN, &sh->ops.complete) &&
- test_bit(STRIPE_OP_POSTXOR, &sh->ops.complete)) {
-
- clear_bit(STRIPE_OP_BIODRAIN, &sh->ops.complete);
- clear_bit(STRIPE_OP_BIODRAIN, &sh->ops.ack);
- clear_bit(STRIPE_OP_BIODRAIN, &sh->ops.pending);
-
- clear_bit(STRIPE_OP_POSTXOR, &sh->ops.complete);
- clear_bit(STRIPE_OP_POSTXOR, &sh->ops.ack);
- clear_bit(STRIPE_OP_POSTXOR, &sh->ops.pending);
+ prexor = 0;
+ if (sh->reconstruct_state == reconstruct_state_prexor_drain_result)
+ prexor = 1;
+ if (sh->reconstruct_state == reconstruct_state_drain_result ||
+ sh->reconstruct_state == reconstruct_state_prexor_drain_result) {
+ sh->reconstruct_state = reconstruct_state_idle;
/* All the 'written' buffers and the parity block are ready to
* be written back to disk
(i == sh->pd_idx || dev->written)) {
pr_debug("Writing block %d\n", i);
set_bit(R5_Wantwrite, &dev->flags);
- if (!test_and_set_bit(
- STRIPE_OP_IO, &sh->ops.pending))
- sh->ops.count++;
+ if (prexor)
+ continue;
if (!test_bit(R5_Insync, &dev->flags) ||
(i == sh->pd_idx && s.failed == 0))
set_bit(STRIPE_INSYNC, &sh->state);
* 2/ A 'check' operation is in flight, as it may clobber the parity
* block.
*/
- if (s.to_write && !test_bit(STRIPE_OP_POSTXOR, &sh->ops.pending) &&
- !test_bit(STRIPE_OP_CHECK, &sh->ops.pending))
- handle_issuing_new_write_requests5(conf, sh, &s, disks);
+ if (s.to_write && !sh->reconstruct_state && !sh->check_state)
+ handle_stripe_dirtying5(conf, sh, &s, disks);
/* maybe we need to check and possibly fix the parity for this stripe
* Any reads will already have been scheduled, so we just see if enough
* data is available. The parity check is held off while parity
* dependent operations are in flight.
*/
- if ((s.syncing && s.locked == 0 &&
- !test_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.pending) &&
- !test_bit(STRIPE_INSYNC, &sh->state)) ||
- test_bit(STRIPE_OP_CHECK, &sh->ops.pending) ||
- test_bit(STRIPE_OP_MOD_REPAIR_PD, &sh->ops.pending))
+ if (sh->check_state ||
+ (s.syncing && s.locked == 0 &&
+ !test_bit(STRIPE_COMPUTE_RUN, &sh->state) &&
+ !test_bit(STRIPE_INSYNC, &sh->state)))
handle_parity_checks5(conf, sh, &s, disks);
if (s.syncing && s.locked == 0 && test_bit(STRIPE_INSYNC, &sh->state)) {
dev = &sh->dev[s.failed_num];
if (!test_bit(R5_ReWrite, &dev->flags)) {
set_bit(R5_Wantwrite, &dev->flags);
- if (!test_and_set_bit(STRIPE_OP_IO, &sh->ops.pending))
- sh->ops.count++;
set_bit(R5_ReWrite, &dev->flags);
set_bit(R5_LOCKED, &dev->flags);
s.locked++;
} else {
/* let's read it back */
set_bit(R5_Wantread, &dev->flags);
- if (!test_and_set_bit(STRIPE_OP_IO, &sh->ops.pending))
- sh->ops.count++;
set_bit(R5_LOCKED, &dev->flags);
s.locked++;
}
}
- /* Finish postxor operations initiated by the expansion
- * process
- */
- if (test_bit(STRIPE_OP_POSTXOR, &sh->ops.complete) &&
- !test_bit(STRIPE_OP_BIODRAIN, &sh->ops.pending)) {
-
+ /* Finish reconstruct operations initiated by the expansion process */
+ if (sh->reconstruct_state == reconstruct_state_result) {
+ sh->reconstruct_state = reconstruct_state_idle;
clear_bit(STRIPE_EXPANDING, &sh->state);
-
- clear_bit(STRIPE_OP_POSTXOR, &sh->ops.pending);
- clear_bit(STRIPE_OP_POSTXOR, &sh->ops.ack);
- clear_bit(STRIPE_OP_POSTXOR, &sh->ops.complete);
-
for (i = conf->raid_disks; i--; ) {
set_bit(R5_Wantwrite, &sh->dev[i].flags);
- if (!test_and_set_bit(STRIPE_OP_IO, &sh->ops.pending))
- sh->ops.count++;
+ set_bit(R5_LOCKED, &sh->dev[i].flags);
+ s.locked++;
}
}
if (s.expanded && test_bit(STRIPE_EXPANDING, &sh->state) &&
- !test_bit(STRIPE_OP_POSTXOR, &sh->ops.pending)) {
+ !sh->reconstruct_state) {
/* Need to write out all blocks after computing parity */
sh->disks = conf->raid_disks;
sh->pd_idx = stripe_to_pdidx(sh->sector, conf,
conf->raid_disks);
- s.locked += handle_write_operations5(sh, 1, 1);
- } else if (s.expanded &&
- !test_bit(STRIPE_OP_POSTXOR, &sh->ops.pending)) {
+ schedule_reconstruction5(sh, &s, 1, 1);
+ } else if (s.expanded && !sh->reconstruct_state && s.locked == 0) {
clear_bit(STRIPE_EXPAND_READY, &sh->state);
atomic_dec(&conf->reshape_stripes);
wake_up(&conf->wait_for_overlap);
md_done_sync(conf->mddev, STRIPE_SECTORS, 1);
}
- if (s.expanding && s.locked == 0)
+ if (s.expanding && s.locked == 0 &&
+ !test_bit(STRIPE_COMPUTE_RUN, &sh->state))
handle_stripe_expansion(conf, sh, NULL);
- if (sh->ops.count)
- pending = get_stripe_work(sh);
-
+ unlock:
spin_unlock(&sh->lock);
- if (pending)
- raid5_run_ops(sh, pending);
+ /* wait for this device to become unblocked */
+ if (unlikely(blocked_rdev))
+ md_wait_for_blocked_rdev(blocked_rdev, conf->mddev);
+
+ if (s.ops_request)
+ raid5_run_ops(sh, s.ops_request);
+
+ ops_run_io(sh, &s);
return_io(return_bi);
+ return blocked_rdev == NULL;
}
-static void handle_stripe6(struct stripe_head *sh, struct page *tmp_page)
+static bool handle_stripe6(struct stripe_head *sh, struct page *tmp_page)
{
raid6_conf_t *conf = sh->raid_conf;
int disks = sh->disks;
struct stripe_head_state s;
struct r6_state r6s;
struct r5dev *dev, *pdev, *qdev;
+ mdk_rdev_t *blocked_rdev = NULL;
r6s.qd_idx = raid6_next_disk(pd_idx, disks);
pr_debug("handling stripe %llu, state=%#lx cnt=%d, "
copy_data(0, rbi, dev->page, dev->sector);
rbi2 = r5_next_bio(rbi, dev->sector);
spin_lock_irq(&conf->device_lock);
- if (--rbi->bi_phys_segments == 0) {
+ if (!raid5_dec_bi_phys_segments(rbi)) {
rbi->bi_next = return_bi;
return_bi = rbi;
}
if (dev->written)
s.written++;
rdev = rcu_dereference(conf->disks[i].rdev);
+ if (blocked_rdev == NULL &&
+ rdev && unlikely(test_bit(Blocked, &rdev->flags))) {
+ blocked_rdev = rdev;
+ atomic_inc(&rdev->nr_pending);
+ }
if (!rdev || !test_bit(In_sync, &rdev->flags)) {
/* The ReadError flag will just be confusing now */
clear_bit(R5_ReadError, &dev->flags);
set_bit(R5_Insync, &dev->flags);
}
rcu_read_unlock();
+
+ if (unlikely(blocked_rdev)) {
+ if (s.syncing || s.expanding || s.expanded ||
+ s.to_write || s.written) {
+ set_bit(STRIPE_HANDLE, &sh->state);
+ goto unlock;
+ }
+ /* There is nothing for the blocked_rdev to block */
+ rdev_dec_pending(blocked_rdev, conf->mddev);
+ blocked_rdev = NULL;
+ }
+
pr_debug("locked=%d uptodate=%d to_read=%d"
" to_write=%d failed=%d failed_num=%d,%d\n",
s.locked, s.uptodate, s.to_read, s.to_write, s.failed,
* might need to be failed
*/
if (s.failed > 2 && s.to_read+s.to_write+s.written)
- handle_requests_to_failed_array(conf, sh, &s, disks,
- &return_bi);
+ handle_failed_stripe(conf, sh, &s, disks, &return_bi);
if (s.failed > 2 && s.syncing) {
md_done_sync(conf->mddev, STRIPE_SECTORS,0);
clear_bit(STRIPE_SYNCING, &sh->state);
( r6s.q_failed || ((test_bit(R5_Insync, &qdev->flags)
&& !test_bit(R5_LOCKED, &qdev->flags)
&& test_bit(R5_UPTODATE, &qdev->flags)))))
- handle_completed_write_requests(conf, sh, disks, &return_bi);
+ handle_stripe_clean_event(conf, sh, disks, &return_bi);
/* Now we might consider reading some blocks, either to check/generate
* parity, or to satisfy requests
*/
if (s.to_read || s.non_overwrite || (s.to_write && s.failed) ||
(s.syncing && (s.uptodate < disks)) || s.expanding)
- handle_issuing_new_read_requests6(sh, &s, &r6s, disks);
+ handle_stripe_fill6(sh, &s, &r6s, disks);
/* now to consider writing and what else, if anything should be read */
if (s.to_write)
- handle_issuing_new_write_requests6(conf, sh, &s, &r6s, disks);
+ handle_stripe_dirtying6(conf, sh, &s, &r6s, disks);
/* maybe we need to check and possibly fix the parity for this stripe
* Any reads will already have been scheduled, so we just see if enough
md_done_sync(conf->mddev, STRIPE_SECTORS, 1);
}
- if (s.expanding && s.locked == 0)
+ if (s.expanding && s.locked == 0 &&
+ !test_bit(STRIPE_COMPUTE_RUN, &sh->state))
handle_stripe_expansion(conf, sh, &r6s);
+ unlock:
spin_unlock(&sh->lock);
- return_io(return_bi);
+ /* wait for this device to become unblocked */
+ if (unlikely(blocked_rdev))
+ md_wait_for_blocked_rdev(blocked_rdev, conf->mddev);
- for (i=disks; i-- ;) {
- int rw;
- struct bio *bi;
- mdk_rdev_t *rdev;
- if (test_and_clear_bit(R5_Wantwrite, &sh->dev[i].flags))
- rw = WRITE;
- else if (test_and_clear_bit(R5_Wantread, &sh->dev[i].flags))
- rw = READ;
- else
- continue;
-
- bi = &sh->dev[i].req;
+ ops_run_io(sh, &s);
- bi->bi_rw = rw;
- if (rw == WRITE)
- bi->bi_end_io = raid5_end_write_request;
- else
- bi->bi_end_io = raid5_end_read_request;
-
- rcu_read_lock();
- rdev = rcu_dereference(conf->disks[i].rdev);
- if (rdev && test_bit(Faulty, &rdev->flags))
- rdev = NULL;
- if (rdev)
- atomic_inc(&rdev->nr_pending);
- rcu_read_unlock();
-
- if (rdev) {
- if (s.syncing || s.expanding || s.expanded)
- md_sync_acct(rdev->bdev, STRIPE_SECTORS);
+ return_io(return_bi);
- bi->bi_bdev = rdev->bdev;
- pr_debug("for %llu schedule op %ld on disc %d\n",
- (unsigned long long)sh->sector, bi->bi_rw, i);
- atomic_inc(&sh->count);
- bi->bi_sector = sh->sector + rdev->data_offset;
- bi->bi_flags = 1 << BIO_UPTODATE;
- bi->bi_vcnt = 1;
- bi->bi_max_vecs = 1;
- bi->bi_idx = 0;
- bi->bi_io_vec = &sh->dev[i].vec;
- bi->bi_io_vec[0].bv_len = STRIPE_SIZE;
- bi->bi_io_vec[0].bv_offset = 0;
- bi->bi_size = STRIPE_SIZE;
- bi->bi_next = NULL;
- if (rw == WRITE &&
- test_bit(R5_ReWrite, &sh->dev[i].flags))
- atomic_add(STRIPE_SECTORS, &rdev->corrected_errors);
- generic_make_request(bi);
- } else {
- if (rw == WRITE)
- set_bit(STRIPE_DEGRADED, &sh->state);
- pr_debug("skip op %ld on disc %d for sector %llu\n",
- bi->bi_rw, i, (unsigned long long)sh->sector);
- clear_bit(R5_LOCKED, &sh->dev[i].flags);
- set_bit(STRIPE_HANDLE, &sh->state);
- }
- }
+ return blocked_rdev == NULL;
}
-static void handle_stripe(struct stripe_head *sh, struct page *tmp_page)
+/* returns true if the stripe was handled */
+static bool handle_stripe(struct stripe_head *sh, struct page *tmp_page)
{
if (sh->raid_conf->level == 6)
- handle_stripe6(sh, tmp_page);
+ return handle_stripe6(sh, tmp_page);
else
- handle_stripe5(sh);
+ return handle_stripe5(sh);
}
clear_bit(STRIPE_DELAYED, &sh->state);
if (!test_and_set_bit(STRIPE_PREREAD_ACTIVE, &sh->state))
atomic_inc(&conf->preread_active_stripes);
- list_add_tail(&sh->lru, &conf->handle_list);
+ list_add_tail(&sh->lru, &conf->hold_list);
}
- }
+ } else
+ blk_plug_device(conf->mddev->queue);
}
static void activate_bit_delay(raid5_conf_t *conf)
atomic_inc(&rdev->nr_pending);
rcu_read_unlock();
- if (r_queue->unplug_fn)
- r_queue->unplug_fn(r_queue);
+ blk_unplug(r_queue);
rdev_dec_pending(rdev, mddev);
rcu_read_lock();
unplug_slaves(mddev);
}
-static int raid5_issue_flush(struct request_queue *q, struct gendisk *disk,
- sector_t *error_sector)
-{
- mddev_t *mddev = q->queuedata;
- raid5_conf_t *conf = mddev_to_conf(mddev);
- int i, ret = 0;
-
- rcu_read_lock();
- for (i=0; i<mddev->raid_disks && ret == 0; i++) {
- mdk_rdev_t *rdev = rcu_dereference(conf->disks[i].rdev);
- if (rdev && !test_bit(Faulty, &rdev->flags)) {
- struct block_device *bdev = rdev->bdev;
- struct request_queue *r_queue = bdev_get_queue(bdev);
-
- if (!r_queue->issue_flush_fn)
- ret = -EOPNOTSUPP;
- else {
- atomic_inc(&rdev->nr_pending);
- rcu_read_unlock();
- ret = r_queue->issue_flush_fn(r_queue, bdev->bd_disk,
- error_sector);
- rdev_dec_pending(rdev, mddev);
- rcu_read_lock();
- }
- }
- }
- rcu_read_unlock();
- return ret;
-}
-
static int raid5_congested(void *data, int bits)
{
mddev_t *mddev = data;
/* We want read requests to align with chunks where possible,
* but write requests don't need to.
*/
-static int raid5_mergeable_bvec(struct request_queue *q, struct bio *bio, struct bio_vec *biovec)
+static int raid5_mergeable_bvec(struct request_queue *q,
+ struct bvec_merge_data *bvm,
+ struct bio_vec *biovec)
{
mddev_t *mddev = q->queuedata;
- sector_t sector = bio->bi_sector + get_start_sect(bio->bi_bdev);
+ sector_t sector = bvm->bi_sector + get_start_sect(bvm->bi_bdev);
int max;
unsigned int chunk_sectors = mddev->chunk_size >> 9;
- unsigned int bio_sectors = bio->bi_size >> 9;
+ unsigned int bio_sectors = bvm->bi_size >> 9;
- if (bio_data_dir(bio) == WRITE)
+ if ((bvm->bi_rw & 1) == WRITE)
return biovec->bv_len; /* always allow writes to be mergeable */
max = (chunk_sectors - ((sector & (chunk_sectors - 1)) + bio_sectors)) << 9;
if(bi) {
conf->retry_read_aligned_list = bi->bi_next;
bi->bi_next = NULL;
+ /*
+ * this sets the active strip count to 1 and the processed
+ * strip count to zero (upper 8 bits)
+ */
bi->bi_phys_segments = 1; /* biased count of active stripes */
- bi->bi_hw_segments = 0; /* count of processed stripes */
}
return bi;
if ((bi->bi_size>>9) > q->max_sectors)
return 0;
blk_recount_segments(q, bi);
- if (bi->bi_phys_segments > q->max_phys_segments ||
- bi->bi_hw_segments > q->max_hw_segments)
+ if (bi->bi_phys_segments > q->max_phys_segments)
return 0;
if (q->merge_bvec_fn)
}
}
+/* __get_priority_stripe - get the next stripe to process
+ *
+ * Full stripe writes are allowed to pass preread active stripes up until
+ * the bypass_threshold is exceeded. In general the bypass_count
+ * increments when the handle_list is handled before the hold_list; however, it
+ * will not be incremented when STRIPE_IO_STARTED is sampled set signifying a
+ * stripe with in flight i/o. The bypass_count will be reset when the
+ * head of the hold_list has changed, i.e. the head was promoted to the
+ * handle_list.
+ */
+static struct stripe_head *__get_priority_stripe(raid5_conf_t *conf)
+{
+ struct stripe_head *sh;
+
+ pr_debug("%s: handle: %s hold: %s full_writes: %d bypass_count: %d\n",
+ __func__,
+ list_empty(&conf->handle_list) ? "empty" : "busy",
+ list_empty(&conf->hold_list) ? "empty" : "busy",
+ atomic_read(&conf->pending_full_writes), conf->bypass_count);
+
+ if (!list_empty(&conf->handle_list)) {
+ sh = list_entry(conf->handle_list.next, typeof(*sh), lru);
+
+ if (list_empty(&conf->hold_list))
+ conf->bypass_count = 0;
+ else if (!test_bit(STRIPE_IO_STARTED, &sh->state)) {
+ if (conf->hold_list.next == conf->last_hold)
+ conf->bypass_count++;
+ else {
+ conf->last_hold = conf->hold_list.next;
+ conf->bypass_count -= conf->bypass_threshold;
+ if (conf->bypass_count < 0)
+ conf->bypass_count = 0;
+ }
+ }
+ } else if (!list_empty(&conf->hold_list) &&
+ ((conf->bypass_threshold &&
+ conf->bypass_count > conf->bypass_threshold) ||
+ atomic_read(&conf->pending_full_writes) == 0)) {
+ sh = list_entry(conf->hold_list.next,
+ typeof(*sh), lru);
+ conf->bypass_count -= conf->bypass_threshold;
+ if (conf->bypass_count < 0)
+ conf->bypass_count = 0;
+ } else
+ return NULL;
+
+ list_del_init(&sh->lru);
+ atomic_inc(&sh->count);
+ BUG_ON(atomic_read(&sh->count) != 1);
+ return sh;
+}
static int make_request(struct request_queue *q, struct bio * bi)
{
sector_t logical_sector, last_sector;
struct stripe_head *sh;
const int rw = bio_data_dir(bi);
- int remaining;
+ int cpu, remaining;
if (unlikely(bio_barrier(bi))) {
bio_endio(bi, -EOPNOTSUPP);
md_write_start(mddev, bi);
- disk_stat_inc(mddev->gendisk, ios[rw]);
- disk_stat_add(mddev->gendisk, sectors[rw], bio_sectors(bi));
+ cpu = part_stat_lock();
+ part_stat_inc(cpu, &mddev->gendisk->part0, ios[rw]);
+ part_stat_add(cpu, &mddev->gendisk->part0, sectors[rw],
+ bio_sectors(bi));
+ part_stat_unlock();
if (rw == READ &&
mddev->reshape_position == MaxSector &&
goto retry;
}
finish_wait(&conf->wait_for_overlap, &w);
- handle_stripe(sh, NULL);
+ set_bit(STRIPE_HANDLE, &sh->state);
+ clear_bit(STRIPE_DELAYED, &sh->state);
release_stripe(sh);
} else {
/* cannot get stripe for read-ahead, just give-up */
}
spin_lock_irq(&conf->device_lock);
- remaining = --bi->bi_phys_segments;
+ remaining = raid5_dec_bi_phys_segments(bi);
spin_unlock_irq(&conf->device_lock);
if (remaining == 0) {
if ( rw == WRITE )
md_write_end(mddev);
- bi->bi_end_io(bi,
- test_bit(BIO_UPTODATE, &bi->bi_flags)
- ? 0 : -EIO);
+ bio_endio(bi, 0);
}
return 0;
}
j == raid6_next_disk(sh->pd_idx, sh->disks))
continue;
s = compute_blocknr(sh, j);
- if (s < (mddev->array_size<<1)) {
+ if (s < mddev->array_sectors) {
skipped = 1;
continue;
}
release_stripe(sh);
first_sector += STRIPE_SECTORS;
}
+ /* If this takes us to the resync_max point where we have to pause,
+ * then we need to write out the superblock.
+ */
+ sector_nr += conf->chunk_size>>9;
+ if (sector_nr >= mddev->resync_max) {
+ /* Cannot proceed until we've updated the superblock... */
+ wait_event(conf->wait_for_overlap,
+ atomic_read(&conf->reshape_stripes) == 0);
+ mddev->reshape_position = conf->expand_progress;
+ set_bit(MD_CHANGE_DEVS, &mddev->flags);
+ md_wakeup_thread(mddev->thread);
+ wait_event(mddev->sb_wait,
+ !test_bit(MD_CHANGE_DEVS, &mddev->flags)
+ || kthread_should_stop());
+ spin_lock_irq(&conf->device_lock);
+ conf->expand_lo = mddev->reshape_position;
+ spin_unlock_irq(&conf->device_lock);
+ wake_up(&conf->wait_for_overlap);
+ }
return conf->chunk_size>>9;
}
if (test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery))
return reshape_request(mddev, sector_nr, skipped);
+ /* No need to check resync_max as we never do more than one
+ * stripe, and as resync_max will always be on a chunk boundary,
+ * if the check in md_do_sync didn't fire, there is no chance
+ * of overstepping resync_max here
+ */
+
/* if there is too many failed drives and we are trying
* to resync, then assert that we are finished, because there is
* nothing we can do.
return sync_blocks * STRIPE_SECTORS; /* keep things rounded to whole stripes */
}
+
+ bitmap_cond_end_sync(mddev->bitmap, sector_nr);
+
pd_idx = stripe_to_pdidx(sector_nr, conf, raid_disks);
sh = get_active_stripe(conf, sector_nr, raid_disks, pd_idx, 1);
if (sh == NULL) {
clear_bit(STRIPE_INSYNC, &sh->state);
spin_unlock(&sh->lock);
- handle_stripe(sh, NULL);
+ /* wait for any blocked device to be handled */
+ while(unlikely(!handle_stripe(sh, NULL)))
+ ;
release_stripe(sh);
return STRIPE_SECTORS;
sector += STRIPE_SECTORS,
scnt++) {
- if (scnt < raid_bio->bi_hw_segments)
+ if (scnt < raid5_bi_hw_segments(raid_bio))
/* already done this stripe */
continue;
if (!sh) {
/* failed to get a stripe - must wait */
- raid_bio->bi_hw_segments = scnt;
+ raid5_set_bi_hw_segments(raid_bio, scnt);
conf->retry_read_aligned = raid_bio;
return handled;
}
set_bit(R5_ReadError, &sh->dev[dd_idx].flags);
if (!add_stripe_bio(sh, raid_bio, dd_idx, 0)) {
release_stripe(sh);
- raid_bio->bi_hw_segments = scnt;
+ raid5_set_bi_hw_segments(raid_bio, scnt);
conf->retry_read_aligned = raid_bio;
return handled;
}
handled++;
}
spin_lock_irq(&conf->device_lock);
- remaining = --raid_bio->bi_phys_segments;
+ remaining = raid5_dec_bi_phys_segments(raid_bio);
spin_unlock_irq(&conf->device_lock);
- if (remaining == 0) {
-
- raid_bio->bi_end_io(raid_bio,
- test_bit(BIO_UPTODATE, &raid_bio->bi_flags)
- ? 0 : -EIO);
- }
+ if (remaining == 0)
+ bio_endio(raid_bio, 0);
if (atomic_dec_and_test(&conf->active_aligned_reads))
wake_up(&conf->wait_for_stripe);
return handled;
* During the scan, completed stripes are saved for us by the interrupt
* handler, so that they will not have to wait for our next wakeup.
*/
-static void raid5d (mddev_t *mddev)
+static void raid5d(mddev_t *mddev)
{
struct stripe_head *sh;
raid5_conf_t *conf = mddev_to_conf(mddev);
handled = 0;
spin_lock_irq(&conf->device_lock);
while (1) {
- struct list_head *first;
struct bio *bio;
if (conf->seq_flush != conf->seq_write) {
activate_bit_delay(conf);
}
- if (list_empty(&conf->handle_list) &&
- atomic_read(&conf->preread_active_stripes) < IO_THRESHOLD &&
- !blk_queue_plugged(mddev->queue) &&
- !list_empty(&conf->delayed_list))
- raid5_activate_delayed(conf);
-
while ((bio = remove_bio_from_retry(conf))) {
int ok;
spin_unlock_irq(&conf->device_lock);
handled++;
}
- if (list_empty(&conf->handle_list)) {
- async_tx_issue_pending_all();
- break;
- }
-
- first = conf->handle_list.next;
- sh = list_entry(first, struct stripe_head, lru);
+ sh = __get_priority_stripe(conf);
- list_del_init(first);
- atomic_inc(&sh->count);
- BUG_ON(atomic_read(&sh->count)!= 1);
+ if (!sh)
+ break;
spin_unlock_irq(&conf->device_lock);
handled++;
spin_unlock_irq(&conf->device_lock);
+ async_tx_issue_pending_all();
unplug_slaves(mddev);
pr_debug("--- raid5d inactive\n");
raid5_store_stripe_cache_size(mddev_t *mddev, const char *page, size_t len)
{
raid5_conf_t *conf = mddev_to_conf(mddev);
- char *end;
- int new;
+ unsigned long new;
+ int err;
+
if (len >= PAGE_SIZE)
return -EINVAL;
if (!conf)
return -ENODEV;
- new = simple_strtoul(page, &end, 10);
- if (!*page || (*end && *end != '\n') )
+ if (strict_strtoul(page, 10, &new))
return -EINVAL;
if (new <= 16 || new > 32768)
return -EINVAL;
else
break;
}
- md_allow_write(mddev);
+ err = md_allow_write(mddev);
+ if (err)
+ return err;
while (new > conf->max_nr_stripes) {
if (grow_one_stripe(conf))
conf->max_nr_stripes++;
raid5_store_stripe_cache_size);
static ssize_t
+raid5_show_preread_threshold(mddev_t *mddev, char *page)
+{
+ raid5_conf_t *conf = mddev_to_conf(mddev);
+ if (conf)
+ return sprintf(page, "%d\n", conf->bypass_threshold);
+ else
+ return 0;
+}
+
+static ssize_t
+raid5_store_preread_threshold(mddev_t *mddev, const char *page, size_t len)
+{
+ raid5_conf_t *conf = mddev_to_conf(mddev);
+ unsigned long new;
+ if (len >= PAGE_SIZE)
+ return -EINVAL;
+ if (!conf)
+ return -ENODEV;
+
+ if (strict_strtoul(page, 10, &new))
+ return -EINVAL;
+ if (new > conf->max_nr_stripes)
+ return -EINVAL;
+ conf->bypass_threshold = new;
+ return len;
+}
+
+static struct md_sysfs_entry
+raid5_preread_bypass_threshold = __ATTR(preread_bypass_threshold,
+ S_IRUGO | S_IWUSR,
+ raid5_show_preread_threshold,
+ raid5_store_preread_threshold);
+
+static ssize_t
stripe_cache_active_show(mddev_t *mddev, char *page)
{
raid5_conf_t *conf = mddev_to_conf(mddev);
static struct attribute *raid5_attrs[] = {
&raid5_stripecache_size.attr,
&raid5_stripecache_active.attr,
+ &raid5_preread_bypass_threshold.attr,
NULL,
};
static struct attribute_group raid5_attrs_group = {
int raid_disk, memory;
mdk_rdev_t *rdev;
struct disk_info *disk;
- struct list_head *tmp;
int working_disks = 0;
if (mddev->level != 5 && mddev->level != 4 && mddev->level != 6) {
return -EIO;
}
+ if (mddev->chunk_size < PAGE_SIZE) {
+ printk(KERN_ERR "md/raid5: chunk_size must be at least "
+ "PAGE_SIZE but %d < %ld\n",
+ mddev->chunk_size, PAGE_SIZE);
+ return -EINVAL;
+ }
+
if (mddev->reshape_position != MaxSector) {
/* Check that we can continue the reshape.
* Currently only disks can change, it must
goto abort;
}
spin_lock_init(&conf->device_lock);
+ mddev->queue->queue_lock = &conf->device_lock;
init_waitqueue_head(&conf->wait_for_stripe);
init_waitqueue_head(&conf->wait_for_overlap);
INIT_LIST_HEAD(&conf->handle_list);
+ INIT_LIST_HEAD(&conf->hold_list);
INIT_LIST_HEAD(&conf->delayed_list);
INIT_LIST_HEAD(&conf->bitmap_list);
INIT_LIST_HEAD(&conf->inactive_list);
atomic_set(&conf->active_stripes, 0);
atomic_set(&conf->preread_active_stripes, 0);
atomic_set(&conf->active_aligned_reads, 0);
+ conf->bypass_threshold = BYPASS_THRESHOLD;
pr_debug("raid5: run(%s) called.\n", mdname(mddev));
- ITERATE_RDEV(mddev,rdev,tmp) {
+ list_for_each_entry(rdev, &mddev->disks, same_set) {
raid_disk = rdev->raid_disk;
if (raid_disk >= conf->raid_disks
|| raid_disk < 0)
" disk %d\n", bdevname(rdev->bdev,b),
raid_disk);
working_disks++;
- }
+ } else
+ /* Cannot rely on bitmap to complete recovery */
+ conf->fullsync = 1;
}
/*
mdname(mddev));
mddev->queue->unplug_fn = raid5_unplug_device;
- mddev->queue->issue_flush_fn = raid5_issue_flush;
mddev->queue->backing_dev_info.congested_data = mddev;
mddev->queue->backing_dev_info.congested_fn = raid5_congested;
- mddev->array_size = mddev->size * (conf->previous_raid_disks -
+ mddev->array_sectors = 2 * mddev->size * (conf->previous_raid_disks -
conf->max_degraded);
blk_queue_merge_bvec(mddev->queue, raid5_mergeable_bvec);
}
#ifdef DEBUG
-static void print_sh (struct seq_file *seq, struct stripe_head *sh)
+static void print_sh(struct seq_file *seq, struct stripe_head *sh)
{
int i;
seq_printf(seq, "\n");
}
-static void printall (struct seq_file *seq, raid5_conf_t *conf)
+static void printall(struct seq_file *seq, raid5_conf_t *conf)
{
struct stripe_head *sh;
struct hlist_node *hn;
}
#endif
-static void status (struct seq_file *seq, mddev_t *mddev)
+static void status(struct seq_file *seq, mddev_t *mddev)
{
raid5_conf_t *conf = (raid5_conf_t *) mddev->private;
int i;
err = -EBUSY;
goto abort;
}
+ /* Only remove non-faulty devices if recovery
+ * isn't possible.
+ */
+ if (!test_bit(Faulty, &rdev->flags) &&
+ mddev->degraded <= conf->max_degraded) {
+ err = -EBUSY;
+ goto abort;
+ }
p->rdev = NULL;
synchronize_rcu();
if (atomic_read(&rdev->nr_pending)) {
static int raid5_add_disk(mddev_t *mddev, mdk_rdev_t *rdev)
{
raid5_conf_t *conf = mddev->private;
- int found = 0;
+ int err = -EEXIST;
int disk;
struct disk_info *p;
+ int first = 0;
+ int last = conf->raid_disks - 1;
if (mddev->degraded > conf->max_degraded)
/* no point adding a device */
- return 0;
+ return -EINVAL;
+
+ if (rdev->raid_disk >= 0)
+ first = last = rdev->raid_disk;
/*
* find the disk ... but prefer rdev->saved_raid_disk
* if possible.
*/
if (rdev->saved_raid_disk >= 0 &&
+ rdev->saved_raid_disk >= first &&
conf->disks[rdev->saved_raid_disk].rdev == NULL)
disk = rdev->saved_raid_disk;
else
- disk = 0;
- for ( ; disk < conf->raid_disks; disk++)
+ disk = first;
+ for ( ; disk <= last ; disk++)
if ((p=conf->disks + disk)->rdev == NULL) {
clear_bit(In_sync, &rdev->flags);
rdev->raid_disk = disk;
- found = 1;
+ err = 0;
if (rdev->saved_raid_disk != disk)
conf->fullsync = 1;
rcu_assign_pointer(p->rdev, rdev);
break;
}
print_raid5_conf(conf);
- return found;
+ return err;
}
static int raid5_resize(mddev_t *mddev, sector_t sectors)
raid5_conf_t *conf = mddev_to_conf(mddev);
sectors &= ~((sector_t)mddev->chunk_size/512 - 1);
- mddev->array_size = (sectors * (mddev->raid_disks-conf->max_degraded))>>1;
- set_capacity(mddev->gendisk, mddev->array_size << 1);
+ mddev->array_sectors = sectors * (mddev->raid_disks
+ - conf->max_degraded);
+ set_capacity(mddev->gendisk, mddev->array_sectors);
mddev->changed = 1;
if (sectors/2 > mddev->size && mddev->recovery_cp == MaxSector) {
mddev->recovery_cp = mddev->size << 1;
return -EINVAL; /* Cannot shrink array or change level yet */
if (mddev->delta_disks == 0)
return 0; /* nothing to do */
+ if (mddev->bitmap)
+ /* Cannot grow a bitmap yet */
+ return -EBUSY;
/* Can only proceed if there are plenty of stripe_heads.
* We need a minimum of one full stripe,, and for sensible progress
{
raid5_conf_t *conf = mddev_to_conf(mddev);
mdk_rdev_t *rdev;
- struct list_head *rtmp;
int spares = 0;
int added_devices = 0;
unsigned long flags;
if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery))
return -EBUSY;
- ITERATE_RDEV(mddev, rdev, rtmp)
+ list_for_each_entry(rdev, &mddev->disks, same_set)
if (rdev->raid_disk < 0 &&
!test_bit(Faulty, &rdev->flags))
spares++;
/* Add some new drives, as many as will fit.
* We know there are enough to make the newly sized array work.
*/
- ITERATE_RDEV(mddev, rdev, rtmp)
+ list_for_each_entry(rdev, &mddev->disks, same_set)
if (rdev->raid_disk < 0 &&
!test_bit(Faulty, &rdev->flags)) {
- if (raid5_add_disk(mddev, rdev)) {
+ if (raid5_add_disk(mddev, rdev) == 0) {
char nm[20];
set_bit(In_sync, &rdev->flags);
added_devices++;
struct block_device *bdev;
if (!test_bit(MD_RECOVERY_INTR, &conf->mddev->recovery)) {
- conf->mddev->array_size = conf->mddev->size *
+ conf->mddev->array_sectors = 2 * conf->mddev->size *
(conf->raid_disks - conf->max_degraded);
- set_capacity(conf->mddev->gendisk, conf->mddev->array_size << 1);
+ set_capacity(conf->mddev->gendisk, conf->mddev->array_sectors);
conf->mddev->changed = 1;
bdev = bdget_disk(conf->mddev->gendisk, 0);
if (bdev) {
mutex_lock(&bdev->bd_inode->i_mutex);
- i_size_write(bdev->bd_inode, (loff_t)conf->mddev->array_size << 10);
+ i_size_write(bdev->bd_inode,
+ (loff_t)conf->mddev->array_sectors << 9);
mutex_unlock(&bdev->bd_inode->i_mutex);
bdput(bdev);
}
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff