* miss any bits.
*/
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/highmem.h>
-#include <linux/bitops.h>
#include <linux/kthread.h>
-#include <asm/atomic.h>
#include "raid6.h"
#include <linux/raid/bitmap.h>
return 0;
}
-static void raid5_build_block (struct stripe_head *sh, int i);
+static void raid5_build_block(struct stripe_head *sh, int i);
static void init_stripe(struct stripe_head *sh, sector_t sector, int pd_idx, int disks)
{
release_stripe(sh);
}
-static void raid5_end_write_request (struct bio *bi, int error)
+static void raid5_end_write_request(struct bio *bi, int error)
{
struct stripe_head *sh = bi->bi_private;
raid5_conf_t *conf = sh->raid_conf;
static sector_t compute_blocknr(struct stripe_head *sh, int i);
-static void raid5_build_block (struct stripe_head *sh, int i)
+static void raid5_build_block(struct stripe_head *sh, int i)
{
struct r5dev *dev = &sh->dev[i];
set_bit(MD_RECOVERY_INTR, &mddev->recovery);
}
set_bit(Faulty, &rdev->flags);
- printk (KERN_ALERT
- "raid5: Disk failure on %s, disabling device.\n"
- "raid5: Operation continuing on %d devices.\n",
- bdevname(rdev->bdev,b), conf->raid_disks - mddev->degraded);
+ printk(KERN_ALERT
+ "raid5: Disk failure on %s, disabling device.\n"
+ "raid5: Operation continuing on %d devices.\n",
+ bdevname(rdev->bdev,b), conf->raid_disks - mddev->degraded);
}
}
*dd_idx = (*pd_idx + 2 + *dd_idx) % raid_disks;
break;
default:
- printk (KERN_CRIT "raid6: unsupported algorithm %d\n",
- conf->algorithm);
+ printk(KERN_CRIT "raid6: unsupported algorithm %d\n",
+ conf->algorithm);
}
break;
}
}
break;
default:
- printk (KERN_CRIT "raid6: unsupported algorithm %d\n",
- conf->algorithm);
+ printk(KERN_CRIT "raid6: unsupported algorithm %d\n",
+ conf->algorithm);
}
break;
}
chunk_number = stripe * data_disks + i;
r_sector = (sector_t)chunk_number * sectors_per_chunk + chunk_offset;
- check = raid5_compute_sector (r_sector, raid_disks, data_disks, &dummy1, &dummy2, conf);
+ check = raid5_compute_sector(r_sector, raid_disks, data_disks, &dummy1, &dummy2, conf);
if (check != sh->sector || dummy1 != dd_idx || dummy2 != sh->pd_idx) {
printk(KERN_ERR "compute_blocknr: map not correct\n");
return 0;
int raid_disk, memory;
mdk_rdev_t *rdev;
struct disk_info *disk;
- struct list_head *tmp;
int working_disks = 0;
if (mddev->level != 5 && mddev->level != 4 && mddev->level != 6) {
return -EIO;
}
+ if (mddev->chunk_size < PAGE_SIZE) {
+ printk(KERN_ERR "md/raid5: chunk_size must be at least "
+ "PAGE_SIZE but %d < %ld\n",
+ mddev->chunk_size, PAGE_SIZE);
+ return -EINVAL;
+ }
+
if (mddev->reshape_position != MaxSector) {
/* Check that we can continue the reshape.
* Currently only disks can change, it must
pr_debug("raid5: run(%s) called.\n", mdname(mddev));
- rdev_for_each(rdev, tmp, mddev) {
+ list_for_each_entry(rdev, &mddev->disks, same_set) {
raid_disk = rdev->raid_disk;
if (raid_disk >= conf->raid_disks
|| raid_disk < 0)
}
#ifdef DEBUG
-static void print_sh (struct seq_file *seq, struct stripe_head *sh)
+static void print_sh(struct seq_file *seq, struct stripe_head *sh)
{
int i;
seq_printf(seq, "\n");
}
-static void printall (struct seq_file *seq, raid5_conf_t *conf)
+static void printall(struct seq_file *seq, raid5_conf_t *conf)
{
struct stripe_head *sh;
struct hlist_node *hn;
}
#endif
-static void status (struct seq_file *seq, mddev_t *mddev)
+static void status(struct seq_file *seq, mddev_t *mddev)
{
raid5_conf_t *conf = (raid5_conf_t *) mddev->private;
int i;
{
raid5_conf_t *conf = mddev_to_conf(mddev);
mdk_rdev_t *rdev;
- struct list_head *rtmp;
int spares = 0;
int added_devices = 0;
unsigned long flags;
if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery))
return -EBUSY;
- rdev_for_each(rdev, rtmp, mddev)
+ list_for_each_entry(rdev, &mddev->disks, same_set)
if (rdev->raid_disk < 0 &&
!test_bit(Faulty, &rdev->flags))
spares++;
/* Add some new drives, as many as will fit.
* We know there are enough to make the newly sized array work.
*/
- rdev_for_each(rdev, rtmp, mddev)
+ list_for_each_entry(rdev, &mddev->disks, same_set)
if (rdev->raid_disk < 0 &&
!test_bit(Faulty, &rdev->flags)) {
if (raid5_add_disk(mddev, rdev) == 0) {