* miss any bits.
*/
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/highmem.h>
-#include <linux/bitops.h>
+#include <linux/blkdev.h>
#include <linux/kthread.h>
-#include <asm/atomic.h>
-#include "raid6.h"
-
-#include <linux/raid/bitmap.h>
+#include <linux/raid/pq.h>
+#include <linux/async_tx.h>
+#include <linux/seq_file.h>
+#include "md.h"
+#include "raid5.h"
+#include "bitmap.h"
/*
* Stripe cache
#define STRIPE_SHIFT (PAGE_SHIFT - 9)
#define STRIPE_SECTORS (STRIPE_SIZE>>9)
#define IO_THRESHOLD 1
+#define BYPASS_THRESHOLD 1
#define NR_HASH (PAGE_SIZE / sizeof(struct hlist_head))
#define HASH_MASK (NR_HASH - 1)
/*
* The following can be used to debug the driver
*/
-#define RAID5_DEBUG 0
#define RAID5_PARANOIA 1
#if RAID5_PARANOIA && defined(CONFIG_SMP)
# define CHECK_DEVLOCK() assert_spin_locked(&conf->device_lock)
# define CHECK_DEVLOCK()
#endif
-#define PRINTK(x...) ((void)(RAID5_DEBUG && printk(x)))
-#if RAID5_DEBUG
+#ifdef DEBUG
#define inline
#define __inline__
#endif
-#if !RAID6_USE_EMPTY_ZERO_PAGE
-/* In .bss so it's zeroed */
-const char raid6_empty_zero_page[PAGE_SIZE] __attribute__((aligned(256)));
-#endif
+#define printk_rl(args...) ((void) (printk_ratelimit() && printk(args)))
+
+/*
+ * We maintain a biased count of active stripes in the bottom 16 bits of
+ * bi_phys_segments, and a count of processed stripes in the upper 16 bits
+ */
+static inline int raid5_bi_phys_segments(struct bio *bio)
+{
+ return bio->bi_phys_segments & 0xffff;
+}
+
+static inline int raid5_bi_hw_segments(struct bio *bio)
+{
+ return (bio->bi_phys_segments >> 16) & 0xffff;
+}
+
+static inline int raid5_dec_bi_phys_segments(struct bio *bio)
+{
+ --bio->bi_phys_segments;
+ return raid5_bi_phys_segments(bio);
+}
+
+static inline int raid5_dec_bi_hw_segments(struct bio *bio)
+{
+ unsigned short val = raid5_bi_hw_segments(bio);
+
+ --val;
+ bio->bi_phys_segments = (val << 16) | raid5_bi_phys_segments(bio);
+ return val;
+}
+
+static inline void raid5_set_bi_hw_segments(struct bio *bio, unsigned int cnt)
+{
+ bio->bi_phys_segments = raid5_bi_phys_segments(bio) || (cnt << 16);
+}
+/* Find first data disk in a raid6 stripe */
+static inline int raid6_d0(struct stripe_head *sh)
+{
+ if (sh->ddf_layout)
+ /* ddf always start from first device */
+ return 0;
+ /* md starts just after Q block */
+ if (sh->qd_idx == sh->disks - 1)
+ return 0;
+ else
+ return sh->qd_idx + 1;
+}
static inline int raid6_next_disk(int disk, int raid_disks)
{
disk++;
return (disk < raid_disks) ? disk : 0;
}
+
+/* When walking through the disks in a raid5, starting at raid6_d0,
+ * We need to map each disk to a 'slot', where the data disks are slot
+ * 0 .. raid_disks-3, the parity disk is raid_disks-2 and the Q disk
+ * is raid_disks-1. This help does that mapping.
+ */
+static int raid6_idx_to_slot(int idx, struct stripe_head *sh,
+ int *count, int syndrome_disks)
+{
+ int slot;
+
+ if (idx == sh->pd_idx)
+ return syndrome_disks;
+ if (idx == sh->qd_idx)
+ return syndrome_disks + 1;
+ slot = (*count)++;
+ return slot;
+}
+
+static void return_io(struct bio *return_bi)
+{
+ struct bio *bi = return_bi;
+ while (bi) {
+
+ return_bi = bi->bi_next;
+ bi->bi_next = NULL;
+ bi->bi_size = 0;
+ bio_endio(bi, 0);
+ bi = return_bi;
+ }
+}
+
static void print_raid5_conf (raid5_conf_t *conf);
+static int stripe_operations_active(struct stripe_head *sh)
+{
+ return sh->check_state || sh->reconstruct_state ||
+ test_bit(STRIPE_BIOFILL_RUN, &sh->state) ||
+ test_bit(STRIPE_COMPUTE_RUN, &sh->state);
+}
+
static void __release_stripe(raid5_conf_t *conf, struct stripe_head *sh)
{
if (atomic_dec_and_test(&sh->count)) {
}
md_wakeup_thread(conf->mddev->thread);
} else {
+ BUG_ON(stripe_operations_active(sh));
if (test_and_clear_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) {
atomic_dec(&conf->preread_active_stripes);
if (atomic_read(&conf->preread_active_stripes) < IO_THRESHOLD)
}
}
}
+
static void release_stripe(struct stripe_head *sh)
{
raid5_conf_t *conf = sh->raid_conf;
static inline void remove_hash(struct stripe_head *sh)
{
- PRINTK("remove_hash(), stripe %llu\n", (unsigned long long)sh->sector);
+ pr_debug("remove_hash(), stripe %llu\n",
+ (unsigned long long)sh->sector);
hlist_del_init(&sh->hash);
}
{
struct hlist_head *hp = stripe_hash(conf, sh->sector);
- PRINTK("insert_hash(), stripe %llu\n", (unsigned long long)sh->sector);
+ pr_debug("insert_hash(), stripe %llu\n",
+ (unsigned long long)sh->sector);
CHECK_DEVLOCK();
hlist_add_head(&sh->hash, hp);
return 0;
}
-static void raid5_build_block (struct stripe_head *sh, int i);
+static void raid5_build_block(struct stripe_head *sh, int i, int previous);
+static void stripe_set_idx(sector_t stripe, raid5_conf_t *conf, int previous,
+ struct stripe_head *sh);
-static void init_stripe(struct stripe_head *sh, sector_t sector, int pd_idx, int disks)
+static void init_stripe(struct stripe_head *sh, sector_t sector, int previous)
{
raid5_conf_t *conf = sh->raid_conf;
int i;
BUG_ON(atomic_read(&sh->count) != 0);
BUG_ON(test_bit(STRIPE_HANDLE, &sh->state));
-
+ BUG_ON(stripe_operations_active(sh));
+
CHECK_DEVLOCK();
- PRINTK("init_stripe called, stripe %llu\n",
+ pr_debug("init_stripe called, stripe %llu\n",
(unsigned long long)sh->sector);
remove_hash(sh);
+ sh->generation = conf->generation - previous;
+ sh->disks = previous ? conf->previous_raid_disks : conf->raid_disks;
sh->sector = sector;
- sh->pd_idx = pd_idx;
+ stripe_set_idx(sector, conf, previous, sh);
sh->state = 0;
- sh->disks = disks;
for (i = sh->disks; i--; ) {
struct r5dev *dev = &sh->dev[i];
- if (dev->toread || dev->towrite || dev->written ||
+ if (dev->toread || dev->read || dev->towrite || dev->written ||
test_bit(R5_LOCKED, &dev->flags)) {
- printk("sector=%llx i=%d %p %p %p %d\n",
+ printk(KERN_ERR "sector=%llx i=%d %p %p %p %p %d\n",
(unsigned long long)sh->sector, i, dev->toread,
- dev->towrite, dev->written,
+ dev->read, dev->towrite, dev->written,
test_bit(R5_LOCKED, &dev->flags));
BUG();
}
dev->flags = 0;
- raid5_build_block(sh, i);
+ raid5_build_block(sh, i, previous);
}
insert_hash(conf, sh);
}
-static struct stripe_head *__find_stripe(raid5_conf_t *conf, sector_t sector, int disks)
+static struct stripe_head *__find_stripe(raid5_conf_t *conf, sector_t sector,
+ short generation)
{
struct stripe_head *sh;
struct hlist_node *hn;
CHECK_DEVLOCK();
- PRINTK("__find_stripe, sector %llu\n", (unsigned long long)sector);
+ pr_debug("__find_stripe, sector %llu\n", (unsigned long long)sector);
hlist_for_each_entry(sh, hn, stripe_hash(conf, sector), hash)
- if (sh->sector == sector && sh->disks == disks)
+ if (sh->sector == sector && sh->generation == generation)
return sh;
- PRINTK("__stripe %llu not in cache\n", (unsigned long long)sector);
+ pr_debug("__stripe %llu not in cache\n", (unsigned long long)sector);
return NULL;
}
static void unplug_slaves(mddev_t *mddev);
-static void raid5_unplug_device(request_queue_t *q);
+static void raid5_unplug_device(struct request_queue *q);
-static struct stripe_head *get_active_stripe(raid5_conf_t *conf, sector_t sector, int disks,
- int pd_idx, int noblock)
+static struct stripe_head *
+get_active_stripe(raid5_conf_t *conf, sector_t sector,
+ int previous, int noblock)
{
struct stripe_head *sh;
- PRINTK("get_stripe, sector %llu\n", (unsigned long long)sector);
+ pr_debug("get_stripe, sector %llu\n", (unsigned long long)sector);
spin_lock_irq(&conf->device_lock);
wait_event_lock_irq(conf->wait_for_stripe,
conf->quiesce == 0,
conf->device_lock, /* nothing */);
- sh = __find_stripe(conf, sector, disks);
+ sh = __find_stripe(conf, sector, conf->generation - previous);
if (!sh) {
if (!conf->inactive_blocked)
sh = get_free_stripe(conf);
);
conf->inactive_blocked = 0;
} else
- init_stripe(sh, sector, pd_idx, disks);
+ init_stripe(sh, sector, previous);
} else {
if (atomic_read(&sh->count)) {
- BUG_ON(!list_empty(&sh->lru));
+ BUG_ON(!list_empty(&sh->lru)
+ && !test_bit(STRIPE_EXPANDING, &sh->state));
} else {
if (!test_bit(STRIPE_HANDLE, &sh->state))
atomic_inc(&conf->active_stripes);
return sh;
}
-static int grow_one_stripe(raid5_conf_t *conf)
+static void
+raid5_end_read_request(struct bio *bi, int error);
+static void
+raid5_end_write_request(struct bio *bi, int error);
+
+static void ops_run_io(struct stripe_head *sh, struct stripe_head_state *s)
{
- struct stripe_head *sh;
- sh = kmem_cache_alloc(conf->slab_cache, GFP_KERNEL);
- if (!sh)
- return 0;
- memset(sh, 0, sizeof(*sh) + (conf->raid_disks-1)*sizeof(struct r5dev));
- sh->raid_conf = conf;
- spin_lock_init(&sh->lock);
+ raid5_conf_t *conf = sh->raid_conf;
+ int i, disks = sh->disks;
- if (grow_buffers(sh, conf->raid_disks)) {
- shrink_buffers(sh, conf->raid_disks);
- kmem_cache_free(conf->slab_cache, sh);
- return 0;
+ might_sleep();
+
+ for (i = disks; i--; ) {
+ int rw;
+ struct bio *bi;
+ mdk_rdev_t *rdev;
+ if (test_and_clear_bit(R5_Wantwrite, &sh->dev[i].flags))
+ rw = WRITE;
+ else if (test_and_clear_bit(R5_Wantread, &sh->dev[i].flags))
+ rw = READ;
+ else
+ continue;
+
+ bi = &sh->dev[i].req;
+
+ bi->bi_rw = rw;
+ if (rw == WRITE)
+ bi->bi_end_io = raid5_end_write_request;
+ else
+ bi->bi_end_io = raid5_end_read_request;
+
+ rcu_read_lock();
+ rdev = rcu_dereference(conf->disks[i].rdev);
+ if (rdev && test_bit(Faulty, &rdev->flags))
+ rdev = NULL;
+ if (rdev)
+ atomic_inc(&rdev->nr_pending);
+ rcu_read_unlock();
+
+ if (rdev) {
+ if (s->syncing || s->expanding || s->expanded)
+ md_sync_acct(rdev->bdev, STRIPE_SECTORS);
+
+ set_bit(STRIPE_IO_STARTED, &sh->state);
+
+ bi->bi_bdev = rdev->bdev;
+ pr_debug("%s: for %llu schedule op %ld on disc %d\n",
+ __func__, (unsigned long long)sh->sector,
+ bi->bi_rw, i);
+ atomic_inc(&sh->count);
+ bi->bi_sector = sh->sector + rdev->data_offset;
+ bi->bi_flags = 1 << BIO_UPTODATE;
+ bi->bi_vcnt = 1;
+ bi->bi_max_vecs = 1;
+ bi->bi_idx = 0;
+ bi->bi_io_vec = &sh->dev[i].vec;
+ bi->bi_io_vec[0].bv_len = STRIPE_SIZE;
+ bi->bi_io_vec[0].bv_offset = 0;
+ bi->bi_size = STRIPE_SIZE;
+ bi->bi_next = NULL;
+ if (rw == WRITE &&
+ test_bit(R5_ReWrite, &sh->dev[i].flags))
+ atomic_add(STRIPE_SECTORS,
+ &rdev->corrected_errors);
+ generic_make_request(bi);
+ } else {
+ if (rw == WRITE)
+ set_bit(STRIPE_DEGRADED, &sh->state);
+ pr_debug("skip op %ld on disc %d for sector %llu\n",
+ bi->bi_rw, i, (unsigned long long)sh->sector);
+ clear_bit(R5_LOCKED, &sh->dev[i].flags);
+ set_bit(STRIPE_HANDLE, &sh->state);
+ }
}
- sh->disks = conf->raid_disks;
- /* we just created an active stripe so... */
- atomic_set(&sh->count, 1);
- atomic_inc(&conf->active_stripes);
- INIT_LIST_HEAD(&sh->lru);
- release_stripe(sh);
- return 1;
}
-static int grow_stripes(raid5_conf_t *conf, int num)
+static struct dma_async_tx_descriptor *
+async_copy_data(int frombio, struct bio *bio, struct page *page,
+ sector_t sector, struct dma_async_tx_descriptor *tx)
{
- struct kmem_cache *sc;
- int devs = conf->raid_disks;
+ struct bio_vec *bvl;
+ struct page *bio_page;
+ int i;
+ int page_offset;
- sprintf(conf->cache_name[0], "raid5/%s", mdname(conf->mddev));
- sprintf(conf->cache_name[1], "raid5/%s-alt", mdname(conf->mddev));
- conf->active_name = 0;
- sc = kmem_cache_create(conf->cache_name[conf->active_name],
- sizeof(struct stripe_head)+(devs-1)*sizeof(struct r5dev),
- 0, 0, NULL, NULL);
- if (!sc)
- return 1;
- conf->slab_cache = sc;
- conf->pool_size = devs;
- while (num--)
- if (!grow_one_stripe(conf))
- return 1;
- return 0;
+ if (bio->bi_sector >= sector)
+ page_offset = (signed)(bio->bi_sector - sector) * 512;
+ else
+ page_offset = (signed)(sector - bio->bi_sector) * -512;
+ bio_for_each_segment(bvl, bio, i) {
+ int len = bio_iovec_idx(bio, i)->bv_len;
+ int clen;
+ int b_offset = 0;
+
+ if (page_offset < 0) {
+ b_offset = -page_offset;
+ page_offset += b_offset;
+ len -= b_offset;
+ }
+
+ if (len > 0 && page_offset + len > STRIPE_SIZE)
+ clen = STRIPE_SIZE - page_offset;
+ else
+ clen = len;
+
+ if (clen > 0) {
+ b_offset += bio_iovec_idx(bio, i)->bv_offset;
+ bio_page = bio_iovec_idx(bio, i)->bv_page;
+ if (frombio)
+ tx = async_memcpy(page, bio_page, page_offset,
+ b_offset, clen,
+ ASYNC_TX_DEP_ACK,
+ tx, NULL, NULL);
+ else
+ tx = async_memcpy(bio_page, page, b_offset,
+ page_offset, clen,
+ ASYNC_TX_DEP_ACK,
+ tx, NULL, NULL);
+ }
+ if (clen < len) /* hit end of page */
+ break;
+ page_offset += len;
+ }
+
+ return tx;
}
-#ifdef CONFIG_MD_RAID5_RESHAPE
-static int resize_stripes(raid5_conf_t *conf, int newsize)
+static void ops_complete_biofill(void *stripe_head_ref)
{
- /* Make all the stripes able to hold 'newsize' devices.
- * New slots in each stripe get 'page' set to a new page.
- *
- * This happens in stages:
- * 1/ create a new kmem_cache and allocate the required number of
- * stripe_heads.
- * 2/ gather all the old stripe_heads and tranfer the pages across
- * to the new stripe_heads. This will have the side effect of
- * freezing the array as once all stripe_heads have been collected,
- * no IO will be possible. Old stripe heads are freed once their
- * pages have been transferred over, and the old kmem_cache is
- * freed when all stripes are done.
- * 3/ reallocate conf->disks to be suitable bigger. If this fails,
- * we simple return a failre status - no need to clean anything up.
- * 4/ allocate new pages for the new slots in the new stripe_heads.
- * If this fails, we don't bother trying the shrink the
- * stripe_heads down again, we just leave them as they are.
- * As each stripe_head is processed the new one is released into
- * active service.
- *
- * Once step2 is started, we cannot afford to wait for a write,
- * so we use GFP_NOIO allocations.
- */
- struct stripe_head *osh, *nsh;
- LIST_HEAD(newstripes);
- struct disk_info *ndisks;
- int err = 0;
- struct kmem_cache *sc;
+ struct stripe_head *sh = stripe_head_ref;
+ struct bio *return_bi = NULL;
+ raid5_conf_t *conf = sh->raid_conf;
int i;
- if (newsize <= conf->pool_size)
- return 0; /* never bother to shrink */
+ pr_debug("%s: stripe %llu\n", __func__,
+ (unsigned long long)sh->sector);
- /* Step 1 */
- sc = kmem_cache_create(conf->cache_name[1-conf->active_name],
- sizeof(struct stripe_head)+(newsize-1)*sizeof(struct r5dev),
- 0, 0, NULL, NULL);
- if (!sc)
- return -ENOMEM;
+ /* clear completed biofills */
+ spin_lock_irq(&conf->device_lock);
+ for (i = sh->disks; i--; ) {
+ struct r5dev *dev = &sh->dev[i];
- for (i = conf->max_nr_stripes; i; i--) {
- nsh = kmem_cache_alloc(sc, GFP_KERNEL);
- if (!nsh)
- break;
+ /* acknowledge completion of a biofill operation */
+ /* and check if we need to reply to a read request,
+ * new R5_Wantfill requests are held off until
+ * !STRIPE_BIOFILL_RUN
+ */
+ if (test_and_clear_bit(R5_Wantfill, &dev->flags)) {
+ struct bio *rbi, *rbi2;
- memset(nsh, 0, sizeof(*nsh) + (newsize-1)*sizeof(struct r5dev));
+ BUG_ON(!dev->read);
+ rbi = dev->read;
+ dev->read = NULL;
+ while (rbi && rbi->bi_sector <
+ dev->sector + STRIPE_SECTORS) {
+ rbi2 = r5_next_bio(rbi, dev->sector);
+ if (!raid5_dec_bi_phys_segments(rbi)) {
+ rbi->bi_next = return_bi;
+ return_bi = rbi;
+ }
+ rbi = rbi2;
+ }
+ }
+ }
+ spin_unlock_irq(&conf->device_lock);
+ clear_bit(STRIPE_BIOFILL_RUN, &sh->state);
- nsh->raid_conf = conf;
- spin_lock_init(&nsh->lock);
+ return_io(return_bi);
- list_add(&nsh->lru, &newstripes);
- }
- if (i) {
- /* didn't get enough, give up */
- while (!list_empty(&newstripes)) {
- nsh = list_entry(newstripes.next, struct stripe_head, lru);
- list_del(&nsh->lru);
- kmem_cache_free(sc, nsh);
+ set_bit(STRIPE_HANDLE, &sh->state);
+ release_stripe(sh);
+}
+
+static void ops_run_biofill(struct stripe_head *sh)
+{
+ struct dma_async_tx_descriptor *tx = NULL;
+ raid5_conf_t *conf = sh->raid_conf;
+ int i;
+
+ pr_debug("%s: stripe %llu\n", __func__,
+ (unsigned long long)sh->sector);
+
+ for (i = sh->disks; i--; ) {
+ struct r5dev *dev = &sh->dev[i];
+ if (test_bit(R5_Wantfill, &dev->flags)) {
+ struct bio *rbi;
+ spin_lock_irq(&conf->device_lock);
+ dev->read = rbi = dev->toread;
+ dev->toread = NULL;
+ spin_unlock_irq(&conf->device_lock);
+ while (rbi && rbi->bi_sector <
+ dev->sector + STRIPE_SECTORS) {
+ tx = async_copy_data(0, rbi, dev->page,
+ dev->sector, tx);
+ rbi = r5_next_bio(rbi, dev->sector);
+ }
}
- kmem_cache_destroy(sc);
- return -ENOMEM;
}
- /* Step 2 - Must use GFP_NOIO now.
- * OK, we have enough stripes, start collecting inactive
- * stripes and copying them over
- */
- list_for_each_entry(nsh, &newstripes, lru) {
- spin_lock_irq(&conf->device_lock);
- wait_event_lock_irq(conf->wait_for_stripe,
- !list_empty(&conf->inactive_list),
- conf->device_lock,
- unplug_slaves(conf->mddev)
- );
+
+ atomic_inc(&sh->count);
+ async_trigger_callback(ASYNC_TX_DEP_ACK | ASYNC_TX_ACK, tx,
+ ops_complete_biofill, sh);
+}
+
+static void ops_complete_compute5(void *stripe_head_ref)
+{
+ struct stripe_head *sh = stripe_head_ref;
+ int target = sh->ops.target;
+ struct r5dev *tgt = &sh->dev[target];
+
+ pr_debug("%s: stripe %llu\n", __func__,
+ (unsigned long long)sh->sector);
+
+ set_bit(R5_UPTODATE, &tgt->flags);
+ BUG_ON(!test_bit(R5_Wantcompute, &tgt->flags));
+ clear_bit(R5_Wantcompute, &tgt->flags);
+ clear_bit(STRIPE_COMPUTE_RUN, &sh->state);
+ if (sh->check_state == check_state_compute_run)
+ sh->check_state = check_state_compute_result;
+ set_bit(STRIPE_HANDLE, &sh->state);
+ release_stripe(sh);
+}
+
+static struct dma_async_tx_descriptor *ops_run_compute5(struct stripe_head *sh)
+{
+ /* kernel stack size limits the total number of disks */
+ int disks = sh->disks;
+ struct page *xor_srcs[disks];
+ int target = sh->ops.target;
+ struct r5dev *tgt = &sh->dev[target];
+ struct page *xor_dest = tgt->page;
+ int count = 0;
+ struct dma_async_tx_descriptor *tx;
+ int i;
+
+ pr_debug("%s: stripe %llu block: %d\n",
+ __func__, (unsigned long long)sh->sector, target);
+ BUG_ON(!test_bit(R5_Wantcompute, &tgt->flags));
+
+ for (i = disks; i--; )
+ if (i != target)
+ xor_srcs[count++] = sh->dev[i].page;
+
+ atomic_inc(&sh->count);
+
+ if (unlikely(count == 1))
+ tx = async_memcpy(xor_dest, xor_srcs[0], 0, 0, STRIPE_SIZE,
+ 0, NULL, ops_complete_compute5, sh);
+ else
+ tx = async_xor(xor_dest, xor_srcs, 0, count, STRIPE_SIZE,
+ ASYNC_TX_XOR_ZERO_DST, NULL,
+ ops_complete_compute5, sh);
+
+ return tx;
+}
+
+static void ops_complete_prexor(void *stripe_head_ref)
+{
+ struct stripe_head *sh = stripe_head_ref;
+
+ pr_debug("%s: stripe %llu\n", __func__,
+ (unsigned long long)sh->sector);
+}
+
+static struct dma_async_tx_descriptor *
+ops_run_prexor(struct stripe_head *sh, struct dma_async_tx_descriptor *tx)
+{
+ /* kernel stack size limits the total number of disks */
+ int disks = sh->disks;
+ struct page *xor_srcs[disks];
+ int count = 0, pd_idx = sh->pd_idx, i;
+
+ /* existing parity data subtracted */
+ struct page *xor_dest = xor_srcs[count++] = sh->dev[pd_idx].page;
+
+ pr_debug("%s: stripe %llu\n", __func__,
+ (unsigned long long)sh->sector);
+
+ for (i = disks; i--; ) {
+ struct r5dev *dev = &sh->dev[i];
+ /* Only process blocks that are known to be uptodate */
+ if (test_bit(R5_Wantdrain, &dev->flags))
+ xor_srcs[count++] = dev->page;
+ }
+
+ tx = async_xor(xor_dest, xor_srcs, 0, count, STRIPE_SIZE,
+ ASYNC_TX_DEP_ACK | ASYNC_TX_XOR_DROP_DST, tx,
+ ops_complete_prexor, sh);
+
+ return tx;
+}
+
+static struct dma_async_tx_descriptor *
+ops_run_biodrain(struct stripe_head *sh, struct dma_async_tx_descriptor *tx)
+{
+ int disks = sh->disks;
+ int i;
+
+ pr_debug("%s: stripe %llu\n", __func__,
+ (unsigned long long)sh->sector);
+
+ for (i = disks; i--; ) {
+ struct r5dev *dev = &sh->dev[i];
+ struct bio *chosen;
+
+ if (test_and_clear_bit(R5_Wantdrain, &dev->flags)) {
+ struct bio *wbi;
+
+ spin_lock(&sh->lock);
+ chosen = dev->towrite;
+ dev->towrite = NULL;
+ BUG_ON(dev->written);
+ wbi = dev->written = chosen;
+ spin_unlock(&sh->lock);
+
+ while (wbi && wbi->bi_sector <
+ dev->sector + STRIPE_SECTORS) {
+ tx = async_copy_data(1, wbi, dev->page,
+ dev->sector, tx);
+ wbi = r5_next_bio(wbi, dev->sector);
+ }
+ }
+ }
+
+ return tx;
+}
+
+static void ops_complete_postxor(void *stripe_head_ref)
+{
+ struct stripe_head *sh = stripe_head_ref;
+ int disks = sh->disks, i, pd_idx = sh->pd_idx;
+
+ pr_debug("%s: stripe %llu\n", __func__,
+ (unsigned long long)sh->sector);
+
+ for (i = disks; i--; ) {
+ struct r5dev *dev = &sh->dev[i];
+ if (dev->written || i == pd_idx)
+ set_bit(R5_UPTODATE, &dev->flags);
+ }
+
+ if (sh->reconstruct_state == reconstruct_state_drain_run)
+ sh->reconstruct_state = reconstruct_state_drain_result;
+ else if (sh->reconstruct_state == reconstruct_state_prexor_drain_run)
+ sh->reconstruct_state = reconstruct_state_prexor_drain_result;
+ else {
+ BUG_ON(sh->reconstruct_state != reconstruct_state_run);
+ sh->reconstruct_state = reconstruct_state_result;
+ }
+
+ set_bit(STRIPE_HANDLE, &sh->state);
+ release_stripe(sh);
+}
+
+static void
+ops_run_postxor(struct stripe_head *sh, struct dma_async_tx_descriptor *tx)
+{
+ /* kernel stack size limits the total number of disks */
+ int disks = sh->disks;
+ struct page *xor_srcs[disks];
+
+ int count = 0, pd_idx = sh->pd_idx, i;
+ struct page *xor_dest;
+ int prexor = 0;
+ unsigned long flags;
+
+ pr_debug("%s: stripe %llu\n", __func__,
+ (unsigned long long)sh->sector);
+
+ /* check if prexor is active which means only process blocks
+ * that are part of a read-modify-write (written)
+ */
+ if (sh->reconstruct_state == reconstruct_state_prexor_drain_run) {
+ prexor = 1;
+ xor_dest = xor_srcs[count++] = sh->dev[pd_idx].page;
+ for (i = disks; i--; ) {
+ struct r5dev *dev = &sh->dev[i];
+ if (dev->written)
+ xor_srcs[count++] = dev->page;
+ }
+ } else {
+ xor_dest = sh->dev[pd_idx].page;
+ for (i = disks; i--; ) {
+ struct r5dev *dev = &sh->dev[i];
+ if (i != pd_idx)
+ xor_srcs[count++] = dev->page;
+ }
+ }
+
+ /* 1/ if we prexor'd then the dest is reused as a source
+ * 2/ if we did not prexor then we are redoing the parity
+ * set ASYNC_TX_XOR_DROP_DST and ASYNC_TX_XOR_ZERO_DST
+ * for the synchronous xor case
+ */
+ flags = ASYNC_TX_DEP_ACK | ASYNC_TX_ACK |
+ (prexor ? ASYNC_TX_XOR_DROP_DST : ASYNC_TX_XOR_ZERO_DST);
+
+ atomic_inc(&sh->count);
+
+ if (unlikely(count == 1)) {
+ flags &= ~(ASYNC_TX_XOR_DROP_DST | ASYNC_TX_XOR_ZERO_DST);
+ tx = async_memcpy(xor_dest, xor_srcs[0], 0, 0, STRIPE_SIZE,
+ flags, tx, ops_complete_postxor, sh);
+ } else
+ tx = async_xor(xor_dest, xor_srcs, 0, count, STRIPE_SIZE,
+ flags, tx, ops_complete_postxor, sh);
+}
+
+static void ops_complete_check(void *stripe_head_ref)
+{
+ struct stripe_head *sh = stripe_head_ref;
+
+ pr_debug("%s: stripe %llu\n", __func__,
+ (unsigned long long)sh->sector);
+
+ sh->check_state = check_state_check_result;
+ set_bit(STRIPE_HANDLE, &sh->state);
+ release_stripe(sh);
+}
+
+static void ops_run_check(struct stripe_head *sh)
+{
+ /* kernel stack size limits the total number of disks */
+ int disks = sh->disks;
+ struct page *xor_srcs[disks];
+ struct dma_async_tx_descriptor *tx;
+
+ int count = 0, pd_idx = sh->pd_idx, i;
+ struct page *xor_dest = xor_srcs[count++] = sh->dev[pd_idx].page;
+
+ pr_debug("%s: stripe %llu\n", __func__,
+ (unsigned long long)sh->sector);
+
+ for (i = disks; i--; ) {
+ struct r5dev *dev = &sh->dev[i];
+ if (i != pd_idx)
+ xor_srcs[count++] = dev->page;
+ }
+
+ tx = async_xor_zero_sum(xor_dest, xor_srcs, 0, count, STRIPE_SIZE,
+ &sh->ops.zero_sum_result, 0, NULL, NULL, NULL);
+
+ atomic_inc(&sh->count);
+ tx = async_trigger_callback(ASYNC_TX_DEP_ACK | ASYNC_TX_ACK, tx,
+ ops_complete_check, sh);
+}
+
+static void raid5_run_ops(struct stripe_head *sh, unsigned long ops_request)
+{
+ int overlap_clear = 0, i, disks = sh->disks;
+ struct dma_async_tx_descriptor *tx = NULL;
+
+ if (test_bit(STRIPE_OP_BIOFILL, &ops_request)) {
+ ops_run_biofill(sh);
+ overlap_clear++;
+ }
+
+ if (test_bit(STRIPE_OP_COMPUTE_BLK, &ops_request)) {
+ tx = ops_run_compute5(sh);
+ /* terminate the chain if postxor is not set to be run */
+ if (tx && !test_bit(STRIPE_OP_POSTXOR, &ops_request))
+ async_tx_ack(tx);
+ }
+
+ if (test_bit(STRIPE_OP_PREXOR, &ops_request))
+ tx = ops_run_prexor(sh, tx);
+
+ if (test_bit(STRIPE_OP_BIODRAIN, &ops_request)) {
+ tx = ops_run_biodrain(sh, tx);
+ overlap_clear++;
+ }
+
+ if (test_bit(STRIPE_OP_POSTXOR, &ops_request))
+ ops_run_postxor(sh, tx);
+
+ if (test_bit(STRIPE_OP_CHECK, &ops_request))
+ ops_run_check(sh);
+
+ if (overlap_clear)
+ for (i = disks; i--; ) {
+ struct r5dev *dev = &sh->dev[i];
+ if (test_and_clear_bit(R5_Overlap, &dev->flags))
+ wake_up(&sh->raid_conf->wait_for_overlap);
+ }
+}
+
+static int grow_one_stripe(raid5_conf_t *conf)
+{
+ struct stripe_head *sh;
+ sh = kmem_cache_alloc(conf->slab_cache, GFP_KERNEL);
+ if (!sh)
+ return 0;
+ memset(sh, 0, sizeof(*sh) + (conf->raid_disks-1)*sizeof(struct r5dev));
+ sh->raid_conf = conf;
+ spin_lock_init(&sh->lock);
+
+ if (grow_buffers(sh, conf->raid_disks)) {
+ shrink_buffers(sh, conf->raid_disks);
+ kmem_cache_free(conf->slab_cache, sh);
+ return 0;
+ }
+ sh->disks = conf->raid_disks;
+ /* we just created an active stripe so... */
+ atomic_set(&sh->count, 1);
+ atomic_inc(&conf->active_stripes);
+ INIT_LIST_HEAD(&sh->lru);
+ release_stripe(sh);
+ return 1;
+}
+
+static int grow_stripes(raid5_conf_t *conf, int num)
+{
+ struct kmem_cache *sc;
+ int devs = conf->raid_disks;
+
+ sprintf(conf->cache_name[0],
+ "raid%d-%s", conf->level, mdname(conf->mddev));
+ sprintf(conf->cache_name[1],
+ "raid%d-%s-alt", conf->level, mdname(conf->mddev));
+ conf->active_name = 0;
+ sc = kmem_cache_create(conf->cache_name[conf->active_name],
+ sizeof(struct stripe_head)+(devs-1)*sizeof(struct r5dev),
+ 0, 0, NULL);
+ if (!sc)
+ return 1;
+ conf->slab_cache = sc;
+ conf->pool_size = devs;
+ while (num--)
+ if (!grow_one_stripe(conf))
+ return 1;
+ return 0;
+}
+
+static int resize_stripes(raid5_conf_t *conf, int newsize)
+{
+ /* Make all the stripes able to hold 'newsize' devices.
+ * New slots in each stripe get 'page' set to a new page.
+ *
+ * This happens in stages:
+ * 1/ create a new kmem_cache and allocate the required number of
+ * stripe_heads.
+ * 2/ gather all the old stripe_heads and tranfer the pages across
+ * to the new stripe_heads. This will have the side effect of
+ * freezing the array as once all stripe_heads have been collected,
+ * no IO will be possible. Old stripe heads are freed once their
+ * pages have been transferred over, and the old kmem_cache is
+ * freed when all stripes are done.
+ * 3/ reallocate conf->disks to be suitable bigger. If this fails,
+ * we simple return a failre status - no need to clean anything up.
+ * 4/ allocate new pages for the new slots in the new stripe_heads.
+ * If this fails, we don't bother trying the shrink the
+ * stripe_heads down again, we just leave them as they are.
+ * As each stripe_head is processed the new one is released into
+ * active service.
+ *
+ * Once step2 is started, we cannot afford to wait for a write,
+ * so we use GFP_NOIO allocations.
+ */
+ struct stripe_head *osh, *nsh;
+ LIST_HEAD(newstripes);
+ struct disk_info *ndisks;
+ int err;
+ struct kmem_cache *sc;
+ int i;
+
+ if (newsize <= conf->pool_size)
+ return 0; /* never bother to shrink */
+
+ err = md_allow_write(conf->mddev);
+ if (err)
+ return err;
+
+ /* Step 1 */
+ sc = kmem_cache_create(conf->cache_name[1-conf->active_name],
+ sizeof(struct stripe_head)+(newsize-1)*sizeof(struct r5dev),
+ 0, 0, NULL);
+ if (!sc)
+ return -ENOMEM;
+
+ for (i = conf->max_nr_stripes; i; i--) {
+ nsh = kmem_cache_alloc(sc, GFP_KERNEL);
+ if (!nsh)
+ break;
+
+ memset(nsh, 0, sizeof(*nsh) + (newsize-1)*sizeof(struct r5dev));
+
+ nsh->raid_conf = conf;
+ spin_lock_init(&nsh->lock);
+
+ list_add(&nsh->lru, &newstripes);
+ }
+ if (i) {
+ /* didn't get enough, give up */
+ while (!list_empty(&newstripes)) {
+ nsh = list_entry(newstripes.next, struct stripe_head, lru);
+ list_del(&nsh->lru);
+ kmem_cache_free(sc, nsh);
+ }
+ kmem_cache_destroy(sc);
+ return -ENOMEM;
+ }
+ /* Step 2 - Must use GFP_NOIO now.
+ * OK, we have enough stripes, start collecting inactive
+ * stripes and copying them over
+ */
+ list_for_each_entry(nsh, &newstripes, lru) {
+ spin_lock_irq(&conf->device_lock);
+ wait_event_lock_irq(conf->wait_for_stripe,
+ !list_empty(&conf->inactive_list),
+ conf->device_lock,
+ unplug_slaves(conf->mddev)
+ );
osh = get_free_stripe(conf);
spin_unlock_irq(&conf->device_lock);
atomic_set(&nsh->count, 1);
conf->pool_size = newsize;
return err;
}
-#endif
static int drop_one_stripe(raid5_conf_t *conf)
{
conf->slab_cache = NULL;
}
-static int raid5_end_read_request(struct bio * bi, unsigned int bytes_done,
- int error)
+static void raid5_end_read_request(struct bio * bi, int error)
{
- struct stripe_head *sh = bi->bi_private;
+ struct stripe_head *sh = bi->bi_private;
raid5_conf_t *conf = sh->raid_conf;
int disks = sh->disks, i;
int uptodate = test_bit(BIO_UPTODATE, &bi->bi_flags);
char b[BDEVNAME_SIZE];
mdk_rdev_t *rdev;
- if (bi->bi_size)
- return 1;
for (i=0 ; i<disks; i++)
if (bi == &sh->dev[i].req)
break;
- PRINTK("end_read_request %llu/%d, count: %d, uptodate %d.\n",
- (unsigned long long)sh->sector, i, atomic_read(&sh->count),
+ pr_debug("end_read_request %llu/%d, count: %d, uptodate %d.\n",
+ (unsigned long long)sh->sector, i, atomic_read(&sh->count),
uptodate);
if (i == disks) {
BUG();
- return 0;
+ return;
}
if (uptodate) {
-#if 0
- struct bio *bio;
- unsigned long flags;
- spin_lock_irqsave(&conf->device_lock, flags);
- /* we can return a buffer if we bypassed the cache or
- * if the top buffer is not in highmem. If there are
- * multiple buffers, leave the extra work to
- * handle_stripe
- */
- buffer = sh->bh_read[i];
- if (buffer &&
- (!PageHighMem(buffer->b_page)
- || buffer->b_page == bh->b_page )
- ) {
- sh->bh_read[i] = buffer->b_reqnext;
- buffer->b_reqnext = NULL;
- } else
- buffer = NULL;
- spin_unlock_irqrestore(&conf->device_lock, flags);
- if (sh->bh_page[i]==bh->b_page)
- set_buffer_uptodate(bh);
- if (buffer) {
- if (buffer->b_page != bh->b_page)
- memcpy(buffer->b_data, bh->b_data, bh->b_size);
- buffer->b_end_io(buffer, 1);
- }
-#else
set_bit(R5_UPTODATE, &sh->dev[i].flags);
-#endif
if (test_bit(R5_ReadError, &sh->dev[i].flags)) {
rdev = conf->disks[i].rdev;
- printk(KERN_INFO "raid5:%s: read error corrected (%lu sectors at %llu on %s)\n",
- mdname(conf->mddev), STRIPE_SECTORS,
- (unsigned long long)sh->sector + rdev->data_offset,
- bdevname(rdev->bdev, b));
+ printk_rl(KERN_INFO "raid5:%s: read error corrected"
+ " (%lu sectors at %llu on %s)\n",
+ mdname(conf->mddev), STRIPE_SECTORS,
+ (unsigned long long)(sh->sector
+ + rdev->data_offset),
+ bdevname(rdev->bdev, b));
clear_bit(R5_ReadError, &sh->dev[i].flags);
clear_bit(R5_ReWrite, &sh->dev[i].flags);
}
clear_bit(R5_UPTODATE, &sh->dev[i].flags);
atomic_inc(&rdev->read_errors);
if (conf->mddev->degraded)
- printk(KERN_WARNING "raid5:%s: read error not correctable (sector %llu on %s).\n",
- mdname(conf->mddev),
- (unsigned long long)sh->sector + rdev->data_offset,
- bdn);
+ printk_rl(KERN_WARNING
+ "raid5:%s: read error not correctable "
+ "(sector %llu on %s).\n",
+ mdname(conf->mddev),
+ (unsigned long long)(sh->sector
+ + rdev->data_offset),
+ bdn);
else if (test_bit(R5_ReWrite, &sh->dev[i].flags))
/* Oh, no!!! */
- printk(KERN_WARNING "raid5:%s: read error NOT corrected!! (sector %llu on %s).\n",
- mdname(conf->mddev),
- (unsigned long long)sh->sector + rdev->data_offset,
- bdn);
+ printk_rl(KERN_WARNING
+ "raid5:%s: read error NOT corrected!! "
+ "(sector %llu on %s).\n",
+ mdname(conf->mddev),
+ (unsigned long long)(sh->sector
+ + rdev->data_offset),
+ bdn);
else if (atomic_read(&rdev->read_errors)
> conf->max_nr_stripes)
printk(KERN_WARNING
}
}
rdev_dec_pending(conf->disks[i].rdev, conf->mddev);
-#if 0
- /* must restore b_page before unlocking buffer... */
- if (sh->bh_page[i] != bh->b_page) {
- bh->b_page = sh->bh_page[i];
- bh->b_data = page_address(bh->b_page);
- clear_buffer_uptodate(bh);
- }
-#endif
clear_bit(R5_LOCKED, &sh->dev[i].flags);
set_bit(STRIPE_HANDLE, &sh->state);
release_stripe(sh);
- return 0;
}
-static int raid5_end_write_request (struct bio *bi, unsigned int bytes_done,
- int error)
+static void raid5_end_write_request(struct bio *bi, int error)
{
- struct stripe_head *sh = bi->bi_private;
+ struct stripe_head *sh = bi->bi_private;
raid5_conf_t *conf = sh->raid_conf;
int disks = sh->disks, i;
int uptodate = test_bit(BIO_UPTODATE, &bi->bi_flags);
- if (bi->bi_size)
- return 1;
-
for (i=0 ; i<disks; i++)
if (bi == &sh->dev[i].req)
break;
- PRINTK("end_write_request %llu/%d, count %d, uptodate: %d.\n",
+ pr_debug("end_write_request %llu/%d, count %d, uptodate: %d.\n",
(unsigned long long)sh->sector, i, atomic_read(&sh->count),
uptodate);
if (i == disks) {
BUG();
- return 0;
+ return;
}
if (!uptodate)
clear_bit(R5_LOCKED, &sh->dev[i].flags);
set_bit(STRIPE_HANDLE, &sh->state);
release_stripe(sh);
- return 0;
}
-static sector_t compute_blocknr(struct stripe_head *sh, int i);
+static sector_t compute_blocknr(struct stripe_head *sh, int i, int previous);
-static void raid5_build_block (struct stripe_head *sh, int i)
+static void raid5_build_block(struct stripe_head *sh, int i, int previous)
{
struct r5dev *dev = &sh->dev[i];
dev->req.bi_private = sh;
dev->flags = 0;
- dev->sector = compute_blocknr(sh, i);
+ dev->sector = compute_blocknr(sh, i, previous);
}
static void error(mddev_t *mddev, mdk_rdev_t *rdev)
{
char b[BDEVNAME_SIZE];
raid5_conf_t *conf = (raid5_conf_t *) mddev->private;
- PRINTK("raid5: error called\n");
+ pr_debug("raid5: error called\n");
if (!test_bit(Faulty, &rdev->flags)) {
set_bit(MD_CHANGE_DEVS, &mddev->flags);
/*
* if recovery was running, make sure it aborts.
*/
- set_bit(MD_RECOVERY_ERR, &mddev->recovery);
+ set_bit(MD_RECOVERY_INTR, &mddev->recovery);
}
set_bit(Faulty, &rdev->flags);
- printk (KERN_ALERT
- "raid5: Disk failure on %s, disabling device."
- " Operation continuing on %d devices\n",
- bdevname(rdev->bdev,b), conf->raid_disks - mddev->degraded);
+ printk(KERN_ALERT
+ "raid5: Disk failure on %s, disabling device.\n"
+ "raid5: Operation continuing on %d devices.\n",
+ bdevname(rdev->bdev,b), conf->raid_disks - mddev->degraded);
}
}
* Input: a 'big' sector number,
* Output: index of the data and parity disk, and the sector # in them.
*/
-static sector_t raid5_compute_sector(sector_t r_sector, unsigned int raid_disks,
- unsigned int data_disks, unsigned int * dd_idx,
- unsigned int * pd_idx, raid5_conf_t *conf)
+static sector_t raid5_compute_sector(raid5_conf_t *conf, sector_t r_sector,
+ int previous, int *dd_idx,
+ struct stripe_head *sh)
{
long stripe;
unsigned long chunk_number;
unsigned int chunk_offset;
+ int pd_idx, qd_idx;
+ int ddf_layout = 0;
sector_t new_sector;
- int sectors_per_chunk = conf->chunk_size >> 9;
+ int algorithm = previous ? conf->prev_algo
+ : conf->algorithm;
+ int sectors_per_chunk = previous ? (conf->prev_chunk >> 9)
+ : (conf->chunk_size >> 9);
+ int raid_disks = previous ? conf->previous_raid_disks
+ : conf->raid_disks;
+ int data_disks = raid_disks - conf->max_degraded;
/* First compute the information on this sector */
/*
* Select the parity disk based on the user selected algorithm.
*/
+ pd_idx = qd_idx = ~0;
switch(conf->level) {
case 4:
- *pd_idx = data_disks;
+ pd_idx = data_disks;
break;
case 5:
- switch (conf->algorithm) {
+ switch (algorithm) {
case ALGORITHM_LEFT_ASYMMETRIC:
- *pd_idx = data_disks - stripe % raid_disks;
- if (*dd_idx >= *pd_idx)
+ pd_idx = data_disks - stripe % raid_disks;
+ if (*dd_idx >= pd_idx)
(*dd_idx)++;
break;
case ALGORITHM_RIGHT_ASYMMETRIC:
- *pd_idx = stripe % raid_disks;
- if (*dd_idx >= *pd_idx)
+ pd_idx = stripe % raid_disks;
+ if (*dd_idx >= pd_idx)
(*dd_idx)++;
break;
case ALGORITHM_LEFT_SYMMETRIC:
- *pd_idx = data_disks - stripe % raid_disks;
- *dd_idx = (*pd_idx + 1 + *dd_idx) % raid_disks;
+ pd_idx = data_disks - stripe % raid_disks;
+ *dd_idx = (pd_idx + 1 + *dd_idx) % raid_disks;
break;
case ALGORITHM_RIGHT_SYMMETRIC:
- *pd_idx = stripe % raid_disks;
- *dd_idx = (*pd_idx + 1 + *dd_idx) % raid_disks;
+ pd_idx = stripe % raid_disks;
+ *dd_idx = (pd_idx + 1 + *dd_idx) % raid_disks;
+ break;
+ case ALGORITHM_PARITY_0:
+ pd_idx = 0;
+ (*dd_idx)++;
+ break;
+ case ALGORITHM_PARITY_N:
+ pd_idx = data_disks;
break;
default:
printk(KERN_ERR "raid5: unsupported algorithm %d\n",
- conf->algorithm);
+ algorithm);
+ BUG();
}
break;
case 6:
- /**** FIX THIS ****/
- switch (conf->algorithm) {
+ switch (algorithm) {
case ALGORITHM_LEFT_ASYMMETRIC:
- *pd_idx = raid_disks - 1 - (stripe % raid_disks);
- if (*pd_idx == raid_disks-1)
- (*dd_idx)++; /* Q D D D P */
- else if (*dd_idx >= *pd_idx)
+ pd_idx = raid_disks - 1 - (stripe % raid_disks);
+ qd_idx = pd_idx + 1;
+ if (pd_idx == raid_disks-1) {
+ (*dd_idx)++; /* Q D D D P */
+ qd_idx = 0;
+ } else if (*dd_idx >= pd_idx)
(*dd_idx) += 2; /* D D P Q D */
break;
case ALGORITHM_RIGHT_ASYMMETRIC:
- *pd_idx = stripe % raid_disks;
- if (*pd_idx == raid_disks-1)
- (*dd_idx)++; /* Q D D D P */
- else if (*dd_idx >= *pd_idx)
+ pd_idx = stripe % raid_disks;
+ qd_idx = pd_idx + 1;
+ if (pd_idx == raid_disks-1) {
+ (*dd_idx)++; /* Q D D D P */
+ qd_idx = 0;
+ } else if (*dd_idx >= pd_idx)
(*dd_idx) += 2; /* D D P Q D */
break;
case ALGORITHM_LEFT_SYMMETRIC:
- *pd_idx = raid_disks - 1 - (stripe % raid_disks);
- *dd_idx = (*pd_idx + 2 + *dd_idx) % raid_disks;
+ pd_idx = raid_disks - 1 - (stripe % raid_disks);
+ qd_idx = (pd_idx + 1) % raid_disks;
+ *dd_idx = (pd_idx + 2 + *dd_idx) % raid_disks;
break;
case ALGORITHM_RIGHT_SYMMETRIC:
- *pd_idx = stripe % raid_disks;
- *dd_idx = (*pd_idx + 2 + *dd_idx) % raid_disks;
+ pd_idx = stripe % raid_disks;
+ qd_idx = (pd_idx + 1) % raid_disks;
+ *dd_idx = (pd_idx + 2 + *dd_idx) % raid_disks;
+ break;
+
+ case ALGORITHM_PARITY_0:
+ pd_idx = 0;
+ qd_idx = 1;
+ (*dd_idx) += 2;
+ break;
+ case ALGORITHM_PARITY_N:
+ pd_idx = data_disks;
+ qd_idx = data_disks + 1;
+ break;
+
+ case ALGORITHM_ROTATING_ZERO_RESTART:
+ /* Exactly the same as RIGHT_ASYMMETRIC, but or
+ * of blocks for computing Q is different.
+ */
+ pd_idx = stripe % raid_disks;
+ qd_idx = pd_idx + 1;
+ if (pd_idx == raid_disks-1) {
+ (*dd_idx)++; /* Q D D D P */
+ qd_idx = 0;
+ } else if (*dd_idx >= pd_idx)
+ (*dd_idx) += 2; /* D D P Q D */
+ ddf_layout = 1;
+ break;
+
+ case ALGORITHM_ROTATING_N_RESTART:
+ /* Same a left_asymmetric, by first stripe is
+ * D D D P Q rather than
+ * Q D D D P
+ */
+ pd_idx = raid_disks - 1 - ((stripe + 1) % raid_disks);
+ qd_idx = pd_idx + 1;
+ if (pd_idx == raid_disks-1) {
+ (*dd_idx)++; /* Q D D D P */
+ qd_idx = 0;
+ } else if (*dd_idx >= pd_idx)
+ (*dd_idx) += 2; /* D D P Q D */
+ ddf_layout = 1;
+ break;
+
+ case ALGORITHM_ROTATING_N_CONTINUE:
+ /* Same as left_symmetric but Q is before P */
+ pd_idx = raid_disks - 1 - (stripe % raid_disks);
+ qd_idx = (pd_idx + raid_disks - 1) % raid_disks;
+ *dd_idx = (pd_idx + 1 + *dd_idx) % raid_disks;
+ ddf_layout = 1;
+ break;
+
+ case ALGORITHM_LEFT_ASYMMETRIC_6:
+ /* RAID5 left_asymmetric, with Q on last device */
+ pd_idx = data_disks - stripe % (raid_disks-1);
+ if (*dd_idx >= pd_idx)
+ (*dd_idx)++;
+ qd_idx = raid_disks - 1;
+ break;
+
+ case ALGORITHM_RIGHT_ASYMMETRIC_6:
+ pd_idx = stripe % (raid_disks-1);
+ if (*dd_idx >= pd_idx)
+ (*dd_idx)++;
+ qd_idx = raid_disks - 1;
+ break;
+
+ case ALGORITHM_LEFT_SYMMETRIC_6:
+ pd_idx = data_disks - stripe % (raid_disks-1);
+ *dd_idx = (pd_idx + 1 + *dd_idx) % (raid_disks-1);
+ qd_idx = raid_disks - 1;
+ break;
+
+ case ALGORITHM_RIGHT_SYMMETRIC_6:
+ pd_idx = stripe % (raid_disks-1);
+ *dd_idx = (pd_idx + 1 + *dd_idx) % (raid_disks-1);
+ qd_idx = raid_disks - 1;
+ break;
+
+ case ALGORITHM_PARITY_0_6:
+ pd_idx = 0;
+ (*dd_idx)++;
+ qd_idx = raid_disks - 1;
break;
+
+
default:
- printk (KERN_CRIT "raid6: unsupported algorithm %d\n",
- conf->algorithm);
+ printk(KERN_CRIT "raid6: unsupported algorithm %d\n",
+ algorithm);
+ BUG();
}
break;
}
+ if (sh) {
+ sh->pd_idx = pd_idx;
+ sh->qd_idx = qd_idx;
+ sh->ddf_layout = ddf_layout;
+ }
/*
* Finally, compute the new sector number
*/
}
-static sector_t compute_blocknr(struct stripe_head *sh, int i)
+static sector_t compute_blocknr(struct stripe_head *sh, int i, int previous)
{
raid5_conf_t *conf = sh->raid_conf;
- int raid_disks = sh->disks, data_disks = raid_disks - 1;
+ int raid_disks = sh->disks;
+ int data_disks = raid_disks - conf->max_degraded;
sector_t new_sector = sh->sector, check;
- int sectors_per_chunk = conf->chunk_size >> 9;
+ int sectors_per_chunk = previous ? (conf->prev_chunk >> 9)
+ : (conf->chunk_size >> 9);
+ int algorithm = previous ? conf->prev_algo
+ : conf->algorithm;
sector_t stripe;
int chunk_offset;
- int chunk_number, dummy1, dummy2, dd_idx = i;
+ int chunk_number, dummy1, dd_idx = i;
sector_t r_sector;
+ struct stripe_head sh2;
chunk_offset = sector_div(new_sector, sectors_per_chunk);
switch(conf->level) {
case 4: break;
case 5:
- switch (conf->algorithm) {
+ switch (algorithm) {
case ALGORITHM_LEFT_ASYMMETRIC:
case ALGORITHM_RIGHT_ASYMMETRIC:
if (i > sh->pd_idx)
i += raid_disks;
i -= (sh->pd_idx + 1);
break;
+ case ALGORITHM_PARITY_0:
+ i -= 1;
+ break;
+ case ALGORITHM_PARITY_N:
+ break;
default:
printk(KERN_ERR "raid5: unsupported algorithm %d\n",
- conf->algorithm);
+ algorithm);
+ BUG();
}
break;
case 6:
- data_disks = raid_disks - 2;
- if (i == raid6_next_disk(sh->pd_idx, raid_disks))
+ if (i == sh->qd_idx)
return 0; /* It is the Q disk */
- switch (conf->algorithm) {
+ switch (algorithm) {
case ALGORITHM_LEFT_ASYMMETRIC:
case ALGORITHM_RIGHT_ASYMMETRIC:
- if (sh->pd_idx == raid_disks-1)
- i--; /* Q D D D P */
+ case ALGORITHM_ROTATING_ZERO_RESTART:
+ case ALGORITHM_ROTATING_N_RESTART:
+ if (sh->pd_idx == raid_disks-1)
+ i--; /* Q D D D P */
else if (i > sh->pd_idx)
i -= 2; /* D D P Q D */
break;
i -= (sh->pd_idx + 2);
}
break;
+ case ALGORITHM_PARITY_0:
+ i -= 2;
+ break;
+ case ALGORITHM_PARITY_N:
+ break;
+ case ALGORITHM_ROTATING_N_CONTINUE:
+ if (sh->pd_idx == 0)
+ i--; /* P D D D Q */
+ else if (i > sh->pd_idx)
+ i -= 2; /* D D Q P D */
+ break;
+ case ALGORITHM_LEFT_ASYMMETRIC_6:
+ case ALGORITHM_RIGHT_ASYMMETRIC_6:
+ if (i > sh->pd_idx)
+ i--;
+ break;
+ case ALGORITHM_LEFT_SYMMETRIC_6:
+ case ALGORITHM_RIGHT_SYMMETRIC_6:
+ if (i < sh->pd_idx)
+ i += data_disks + 1;
+ i -= (sh->pd_idx + 1);
+ break;
+ case ALGORITHM_PARITY_0_6:
+ i -= 1;
+ break;
default:
- printk (KERN_CRIT "raid6: unsupported algorithm %d\n",
- conf->algorithm);
+ printk(KERN_CRIT "raid6: unsupported algorithm %d\n",
+ algorithm);
+ BUG();
}
break;
}
chunk_number = stripe * data_disks + i;
r_sector = (sector_t)chunk_number * sectors_per_chunk + chunk_offset;
- check = raid5_compute_sector (r_sector, raid_disks, data_disks, &dummy1, &dummy2, conf);
- if (check != sh->sector || dummy1 != dd_idx || dummy2 != sh->pd_idx) {
+ check = raid5_compute_sector(conf, r_sector,
+ previous, &dummy1, &sh2);
+ if (check != sh->sector || dummy1 != dd_idx || sh2.pd_idx != sh->pd_idx
+ || sh2.qd_idx != sh->qd_idx) {
printk(KERN_ERR "compute_blocknr: map not correct\n");
return 0;
}
}
}
-#define check_xor() do { \
- if (count == MAX_XOR_BLOCKS) { \
- xor_block(count, STRIPE_SIZE, ptr); \
- count = 1; \
- } \
+#define check_xor() do { \
+ if (count == MAX_XOR_BLOCKS) { \
+ xor_blocks(count, STRIPE_SIZE, dest, ptr);\
+ count = 0; \
+ } \
} while(0)
-
-static void compute_block(struct stripe_head *sh, int dd_idx)
-{
- int i, count, disks = sh->disks;
- void *ptr[MAX_XOR_BLOCKS], *p;
-
- PRINTK("compute_block, stripe %llu, idx %d\n",
- (unsigned long long)sh->sector, dd_idx);
-
- ptr[0] = page_address(sh->dev[dd_idx].page);
- memset(ptr[0], 0, STRIPE_SIZE);
- count = 1;
- for (i = disks ; i--; ) {
- if (i == dd_idx)
- continue;
- p = page_address(sh->dev[i].page);
- if (test_bit(R5_UPTODATE, &sh->dev[i].flags))
- ptr[count++] = p;
- else
- printk(KERN_ERR "compute_block() %d, stripe %llu, %d"
- " not present\n", dd_idx,
- (unsigned long long)sh->sector, i);
-
- check_xor();
- }
- if (count != 1)
- xor_block(count, STRIPE_SIZE, ptr);
- set_bit(R5_UPTODATE, &sh->dev[dd_idx].flags);
-}
-
-static void compute_parity5(struct stripe_head *sh, int method)
-{
- raid5_conf_t *conf = sh->raid_conf;
- int i, pd_idx = sh->pd_idx, disks = sh->disks, count;
- void *ptr[MAX_XOR_BLOCKS];
- struct bio *chosen;
-
- PRINTK("compute_parity5, stripe %llu, method %d\n",
- (unsigned long long)sh->sector, method);
-
- count = 1;
- ptr[0] = page_address(sh->dev[pd_idx].page);
- switch(method) {
- case READ_MODIFY_WRITE:
- BUG_ON(!test_bit(R5_UPTODATE, &sh->dev[pd_idx].flags));
- for (i=disks ; i-- ;) {
- if (i==pd_idx)
- continue;
- if (sh->dev[i].towrite &&
- test_bit(R5_UPTODATE, &sh->dev[i].flags)) {
- ptr[count++] = page_address(sh->dev[i].page);
- chosen = sh->dev[i].towrite;
- sh->dev[i].towrite = NULL;
-
- if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags))
- wake_up(&conf->wait_for_overlap);
-
- BUG_ON(sh->dev[i].written);
- sh->dev[i].written = chosen;
- check_xor();
- }
- }
- break;
- case RECONSTRUCT_WRITE:
- memset(ptr[0], 0, STRIPE_SIZE);
- for (i= disks; i-- ;)
- if (i!=pd_idx && sh->dev[i].towrite) {
- chosen = sh->dev[i].towrite;
- sh->dev[i].towrite = NULL;
-
- if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags))
- wake_up(&conf->wait_for_overlap);
-
- BUG_ON(sh->dev[i].written);
- sh->dev[i].written = chosen;
- }
- break;
- case CHECK_PARITY:
- break;
- }
- if (count>1) {
- xor_block(count, STRIPE_SIZE, ptr);
- count = 1;
- }
-
- for (i = disks; i--;)
- if (sh->dev[i].written) {
- sector_t sector = sh->dev[i].sector;
- struct bio *wbi = sh->dev[i].written;
- while (wbi && wbi->bi_sector < sector + STRIPE_SECTORS) {
- copy_data(1, wbi, sh->dev[i].page, sector);
- wbi = r5_next_bio(wbi, sector);
- }
-
- set_bit(R5_LOCKED, &sh->dev[i].flags);
- set_bit(R5_UPTODATE, &sh->dev[i].flags);
- }
-
- switch(method) {
- case RECONSTRUCT_WRITE:
- case CHECK_PARITY:
- for (i=disks; i--;)
- if (i != pd_idx) {
- ptr[count++] = page_address(sh->dev[i].page);
- check_xor();
- }
- break;
- case READ_MODIFY_WRITE:
- for (i = disks; i--;)
- if (sh->dev[i].written) {
- ptr[count++] = page_address(sh->dev[i].page);
- check_xor();
- }
- }
- if (count != 1)
- xor_block(count, STRIPE_SIZE, ptr);
-
- if (method != CHECK_PARITY) {
- set_bit(R5_UPTODATE, &sh->dev[pd_idx].flags);
- set_bit(R5_LOCKED, &sh->dev[pd_idx].flags);
- } else
- clear_bit(R5_UPTODATE, &sh->dev[pd_idx].flags);
-}
-
static void compute_parity6(struct stripe_head *sh, int method)
{
- raid6_conf_t *conf = sh->raid_conf;
- int i, pd_idx = sh->pd_idx, qd_idx, d0_idx, disks = conf->raid_disks, count;
+ raid5_conf_t *conf = sh->raid_conf;
+ int i, pd_idx, qd_idx, d0_idx, disks = sh->disks, count;
+ int syndrome_disks = sh->ddf_layout ? disks : (disks - 2);
struct bio *chosen;
/**** FIX THIS: This could be very bad if disks is close to 256 ****/
- void *ptrs[disks];
+ void *ptrs[syndrome_disks+2];
- qd_idx = raid6_next_disk(pd_idx, disks);
- d0_idx = raid6_next_disk(qd_idx, disks);
+ pd_idx = sh->pd_idx;
+ qd_idx = sh->qd_idx;
+ d0_idx = raid6_d0(sh);
- PRINTK("compute_parity, stripe %llu, method %d\n",
+ pr_debug("compute_parity, stripe %llu, method %d\n",
(unsigned long long)sh->sector, method);
switch(method) {
set_bit(R5_UPTODATE, &sh->dev[i].flags);
}
-// switch(method) {
-// case RECONSTRUCT_WRITE:
-// case CHECK_PARITY:
-// case UPDATE_PARITY:
- /* Note that unlike RAID-5, the ordering of the disks matters greatly. */
- /* FIX: Is this ordering of drives even remotely optimal? */
- count = 0;
- i = d0_idx;
- do {
- ptrs[count++] = page_address(sh->dev[i].page);
- if (count <= disks-2 && !test_bit(R5_UPTODATE, &sh->dev[i].flags))
- printk("block %d/%d not uptodate on parity calc\n", i,count);
- i = raid6_next_disk(i, disks);
- } while ( i != d0_idx );
-// break;
-// }
-
- raid6_call.gen_syndrome(disks, STRIPE_SIZE, ptrs);
+ /* Note that unlike RAID-5, the ordering of the disks matters greatly.*/
+
+ for (i = 0; i < disks; i++)
+ ptrs[i] = (void *)raid6_empty_zero_page;
+
+ count = 0;
+ i = d0_idx;
+ do {
+ int slot = raid6_idx_to_slot(i, sh, &count, syndrome_disks);
+
+ ptrs[slot] = page_address(sh->dev[i].page);
+ if (slot < syndrome_disks &&
+ !test_bit(R5_UPTODATE, &sh->dev[i].flags)) {
+ printk(KERN_ERR "block %d/%d not uptodate "
+ "on parity calc\n", i, count);
+ BUG();
+ }
+
+ i = raid6_next_disk(i, disks);
+ } while (i != d0_idx);
+ BUG_ON(count != syndrome_disks);
+
+ raid6_call.gen_syndrome(syndrome_disks+2, STRIPE_SIZE, ptrs);
switch(method) {
case RECONSTRUCT_WRITE:
/* Compute one missing block */
static void compute_block_1(struct stripe_head *sh, int dd_idx, int nozero)
{
- raid6_conf_t *conf = sh->raid_conf;
- int i, count, disks = conf->raid_disks;
- void *ptr[MAX_XOR_BLOCKS], *p;
- int pd_idx = sh->pd_idx;
- int qd_idx = raid6_next_disk(pd_idx, disks);
+ int i, count, disks = sh->disks;
+ void *ptr[MAX_XOR_BLOCKS], *dest, *p;
+ int qd_idx = sh->qd_idx;
- PRINTK("compute_block_1, stripe %llu, idx %d\n",
+ pr_debug("compute_block_1, stripe %llu, idx %d\n",
(unsigned long long)sh->sector, dd_idx);
if ( dd_idx == qd_idx ) {
/* We're actually computing the Q drive */
compute_parity6(sh, UPDATE_PARITY);
} else {
- ptr[0] = page_address(sh->dev[dd_idx].page);
- if (!nozero) memset(ptr[0], 0, STRIPE_SIZE);
- count = 1;
+ dest = page_address(sh->dev[dd_idx].page);
+ if (!nozero) memset(dest, 0, STRIPE_SIZE);
+ count = 0;
for (i = disks ; i--; ) {
if (i == dd_idx || i == qd_idx)
continue;
check_xor();
}
- if (count != 1)
- xor_block(count, STRIPE_SIZE, ptr);
+ if (count)
+ xor_blocks(count, STRIPE_SIZE, dest, ptr);
if (!nozero) set_bit(R5_UPTODATE, &sh->dev[dd_idx].flags);
else clear_bit(R5_UPTODATE, &sh->dev[dd_idx].flags);
}
/* Compute two missing blocks */
static void compute_block_2(struct stripe_head *sh, int dd_idx1, int dd_idx2)
{
- raid6_conf_t *conf = sh->raid_conf;
- int i, count, disks = conf->raid_disks;
- int pd_idx = sh->pd_idx;
- int qd_idx = raid6_next_disk(pd_idx, disks);
- int d0_idx = raid6_next_disk(qd_idx, disks);
- int faila, failb;
+ int i, count, disks = sh->disks;
+ int syndrome_disks = sh->ddf_layout ? disks : disks-2;
+ int d0_idx = raid6_d0(sh);
+ int faila = -1, failb = -1;
+ /**** FIX THIS: This could be very bad if disks is close to 256 ****/
+ void *ptrs[syndrome_disks+2];
+
+ for (i = 0; i < disks ; i++)
+ ptrs[i] = (void *)raid6_empty_zero_page;
+ count = 0;
+ i = d0_idx;
+ do {
+ int slot = raid6_idx_to_slot(i, sh, &count, syndrome_disks);
+
+ ptrs[slot] = page_address(sh->dev[i].page);
- /* faila and failb are disk numbers relative to d0_idx */
- /* pd_idx become disks-2 and qd_idx become disks-1 */
- faila = (dd_idx1 < d0_idx) ? dd_idx1+(disks-d0_idx) : dd_idx1-d0_idx;
- failb = (dd_idx2 < d0_idx) ? dd_idx2+(disks-d0_idx) : dd_idx2-d0_idx;
+ if (i == dd_idx1)
+ faila = slot;
+ if (i == dd_idx2)
+ failb = slot;
+ i = raid6_next_disk(i, disks);
+ } while (i != d0_idx);
+ BUG_ON(count != syndrome_disks);
BUG_ON(faila == failb);
if ( failb < faila ) { int tmp = faila; faila = failb; failb = tmp; }
- PRINTK("compute_block_2, stripe %llu, idx %d,%d (%d,%d)\n",
- (unsigned long long)sh->sector, dd_idx1, dd_idx2, faila, failb);
+ pr_debug("compute_block_2, stripe %llu, idx %d,%d (%d,%d)\n",
+ (unsigned long long)sh->sector, dd_idx1, dd_idx2,
+ faila, failb);
- if ( failb == disks-1 ) {
+ if (failb == syndrome_disks+1) {
/* Q disk is one of the missing disks */
- if ( faila == disks-2 ) {
+ if (faila == syndrome_disks) {
/* Missing P+Q, just recompute */
compute_parity6(sh, UPDATE_PARITY);
return;
} else {
/* We're missing D+Q; recompute D from P */
- compute_block_1(sh, (dd_idx1 == qd_idx) ? dd_idx2 : dd_idx1, 0);
+ compute_block_1(sh, ((dd_idx1 == sh->qd_idx) ?
+ dd_idx2 : dd_idx1),
+ 0);
compute_parity6(sh, UPDATE_PARITY); /* Is this necessary? */
return;
}
}
- /* We're missing D+P or D+D; build pointer table */
- {
- /**** FIX THIS: This could be very bad if disks is close to 256 ****/
- void *ptrs[disks];
+ /* We're missing D+P or D+D; */
+ if (failb == syndrome_disks) {
+ /* We're missing D+P. */
+ raid6_datap_recov(syndrome_disks+2, STRIPE_SIZE, faila, ptrs);
+ } else {
+ /* We're missing D+D. */
+ raid6_2data_recov(syndrome_disks+2, STRIPE_SIZE, faila, failb,
+ ptrs);
+ }
- count = 0;
- i = d0_idx;
- do {
- ptrs[count++] = page_address(sh->dev[i].page);
- i = raid6_next_disk(i, disks);
- if (i != dd_idx1 && i != dd_idx2 &&
- !test_bit(R5_UPTODATE, &sh->dev[i].flags))
- printk("compute_2 with missing block %d/%d\n", count, i);
- } while ( i != d0_idx );
-
- if ( failb == disks-2 ) {
- /* We're missing D+P. */
- raid6_datap_recov(disks, STRIPE_SIZE, faila, ptrs);
- } else {
- /* We're missing D+D. */
- raid6_2data_recov(disks, STRIPE_SIZE, faila, failb, ptrs);
+ /* Both the above update both missing blocks */
+ set_bit(R5_UPTODATE, &sh->dev[dd_idx1].flags);
+ set_bit(R5_UPTODATE, &sh->dev[dd_idx2].flags);
+}
+
+static void
+schedule_reconstruction5(struct stripe_head *sh, struct stripe_head_state *s,
+ int rcw, int expand)
+{
+ int i, pd_idx = sh->pd_idx, disks = sh->disks;
+
+ if (rcw) {
+ /* if we are not expanding this is a proper write request, and
+ * there will be bios with new data to be drained into the
+ * stripe cache
+ */
+ if (!expand) {
+ sh->reconstruct_state = reconstruct_state_drain_run;
+ set_bit(STRIPE_OP_BIODRAIN, &s->ops_request);
+ } else
+ sh->reconstruct_state = reconstruct_state_run;
+
+ set_bit(STRIPE_OP_POSTXOR, &s->ops_request);
+
+ for (i = disks; i--; ) {
+ struct r5dev *dev = &sh->dev[i];
+
+ if (dev->towrite) {
+ set_bit(R5_LOCKED, &dev->flags);
+ set_bit(R5_Wantdrain, &dev->flags);
+ if (!expand)
+ clear_bit(R5_UPTODATE, &dev->flags);
+ s->locked++;
+ }
}
+ if (s->locked + 1 == disks)
+ if (!test_and_set_bit(STRIPE_FULL_WRITE, &sh->state))
+ atomic_inc(&sh->raid_conf->pending_full_writes);
+ } else {
+ BUG_ON(!(test_bit(R5_UPTODATE, &sh->dev[pd_idx].flags) ||
+ test_bit(R5_Wantcompute, &sh->dev[pd_idx].flags)));
+
+ sh->reconstruct_state = reconstruct_state_prexor_drain_run;
+ set_bit(STRIPE_OP_PREXOR, &s->ops_request);
+ set_bit(STRIPE_OP_BIODRAIN, &s->ops_request);
+ set_bit(STRIPE_OP_POSTXOR, &s->ops_request);
- /* Both the above update both missing blocks */
- set_bit(R5_UPTODATE, &sh->dev[dd_idx1].flags);
- set_bit(R5_UPTODATE, &sh->dev[dd_idx2].flags);
+ for (i = disks; i--; ) {
+ struct r5dev *dev = &sh->dev[i];
+ if (i == pd_idx)
+ continue;
+
+ if (dev->towrite &&
+ (test_bit(R5_UPTODATE, &dev->flags) ||
+ test_bit(R5_Wantcompute, &dev->flags))) {
+ set_bit(R5_Wantdrain, &dev->flags);
+ set_bit(R5_LOCKED, &dev->flags);
+ clear_bit(R5_UPTODATE, &dev->flags);
+ s->locked++;
+ }
+ }
}
-}
+ /* keep the parity disk locked while asynchronous operations
+ * are in flight
+ */
+ set_bit(R5_LOCKED, &sh->dev[pd_idx].flags);
+ clear_bit(R5_UPTODATE, &sh->dev[pd_idx].flags);
+ s->locked++;
+ pr_debug("%s: stripe %llu locked: %d ops_request: %lx\n",
+ __func__, (unsigned long long)sh->sector,
+ s->locked, s->ops_request);
+}
/*
* Each stripe/dev can have one or more bion attached.
raid5_conf_t *conf = sh->raid_conf;
int firstwrite=0;
- PRINTK("adding bh b#%llu to stripe s#%llu\n",
+ pr_debug("adding bh b#%llu to stripe s#%llu\n",
(unsigned long long)bi->bi_sector,
(unsigned long long)sh->sector);
if (*bip)
bi->bi_next = *bip;
*bip = bi;
- bi->bi_phys_segments ++;
+ bi->bi_phys_segments++;
spin_unlock_irq(&conf->device_lock);
spin_unlock(&sh->lock);
- PRINTK("added bi b#%llu to stripe s#%llu, disk %d.\n",
+ pr_debug("added bi b#%llu to stripe s#%llu, disk %d.\n",
(unsigned long long)bi->bi_sector,
(unsigned long long)sh->sector, dd_idx);
memcmp(a, a+4, STRIPE_SIZE-4)==0);
}
-static int stripe_to_pdidx(sector_t stripe, raid5_conf_t *conf, int disks)
+static void stripe_set_idx(sector_t stripe, raid5_conf_t *conf, int previous,
+ struct stripe_head *sh)
{
- int sectors_per_chunk = conf->chunk_size >> 9;
- int pd_idx, dd_idx;
+ int sectors_per_chunk =
+ previous ? (conf->prev_chunk >> 9)
+ : (conf->chunk_size >> 9);
+ int dd_idx;
int chunk_offset = sector_div(stripe, sectors_per_chunk);
+ int disks = previous ? conf->previous_raid_disks : conf->raid_disks;
- raid5_compute_sector(stripe*(disks-1)*sectors_per_chunk
- + chunk_offset, disks, disks-1, &dd_idx, &pd_idx, conf);
- return pd_idx;
+ raid5_compute_sector(conf,
+ stripe * (disks - conf->max_degraded)
+ *sectors_per_chunk + chunk_offset,
+ previous,
+ &dd_idx, sh);
}
-
-/*
- * handle_stripe - do things to a stripe.
- *
- * We lock the stripe and then examine the state of various bits
- * to see what needs to be done.
- * Possible results:
- * return some read request which now have data
- * return some write requests which are safely on disc
- * schedule a read on some buffers
- * schedule a write of some buffers
- * return confirmation of parity correctness
- *
- * Parity calculations are done inside the stripe lock
- * buffers are taken off read_list or write_list, and bh_cache buffers
- * get BH_Lock set before the stripe lock is released.
- *
- */
-
-static void handle_stripe5(struct stripe_head *sh)
+static void
+handle_failed_stripe(raid5_conf_t *conf, struct stripe_head *sh,
+ struct stripe_head_state *s, int disks,
+ struct bio **return_bi)
{
- raid5_conf_t *conf = sh->raid_conf;
- int disks = sh->disks;
- struct bio *return_bi= NULL;
- struct bio *bi;
int i;
- int syncing, expanding, expanded;
- int locked=0, uptodate=0, to_read=0, to_write=0, failed=0, written=0;
- int non_overwrite = 0;
- int failed_num=0;
- struct r5dev *dev;
-
- PRINTK("handling stripe %llu, cnt=%d, pd_idx=%d\n",
- (unsigned long long)sh->sector, atomic_read(&sh->count),
- sh->pd_idx);
+ for (i = disks; i--; ) {
+ struct bio *bi;
+ int bitmap_end = 0;
- spin_lock(&sh->lock);
- clear_bit(STRIPE_HANDLE, &sh->state);
- clear_bit(STRIPE_DELAYED, &sh->state);
+ if (test_bit(R5_ReadError, &sh->dev[i].flags)) {
+ mdk_rdev_t *rdev;
+ rcu_read_lock();
+ rdev = rcu_dereference(conf->disks[i].rdev);
+ if (rdev && test_bit(In_sync, &rdev->flags))
+ /* multiple read failures in one stripe */
+ md_error(conf->mddev, rdev);
+ rcu_read_unlock();
+ }
+ spin_lock_irq(&conf->device_lock);
+ /* fail all writes first */
+ bi = sh->dev[i].towrite;
+ sh->dev[i].towrite = NULL;
+ if (bi) {
+ s->to_write--;
+ bitmap_end = 1;
+ }
- syncing = test_bit(STRIPE_SYNCING, &sh->state);
- expanding = test_bit(STRIPE_EXPAND_SOURCE, &sh->state);
- expanded = test_bit(STRIPE_EXPAND_READY, &sh->state);
- /* Now to look around and see what can be done */
+ if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags))
+ wake_up(&conf->wait_for_overlap);
- rcu_read_lock();
- for (i=disks; i--; ) {
- mdk_rdev_t *rdev;
- dev = &sh->dev[i];
- clear_bit(R5_Insync, &dev->flags);
+ while (bi && bi->bi_sector <
+ sh->dev[i].sector + STRIPE_SECTORS) {
+ struct bio *nextbi = r5_next_bio(bi, sh->dev[i].sector);
+ clear_bit(BIO_UPTODATE, &bi->bi_flags);
+ if (!raid5_dec_bi_phys_segments(bi)) {
+ md_write_end(conf->mddev);
+ bi->bi_next = *return_bi;
+ *return_bi = bi;
+ }
+ bi = nextbi;
+ }
+ /* and fail all 'written' */
+ bi = sh->dev[i].written;
+ sh->dev[i].written = NULL;
+ if (bi) bitmap_end = 1;
+ while (bi && bi->bi_sector <
+ sh->dev[i].sector + STRIPE_SECTORS) {
+ struct bio *bi2 = r5_next_bio(bi, sh->dev[i].sector);
+ clear_bit(BIO_UPTODATE, &bi->bi_flags);
+ if (!raid5_dec_bi_phys_segments(bi)) {
+ md_write_end(conf->mddev);
+ bi->bi_next = *return_bi;
+ *return_bi = bi;
+ }
+ bi = bi2;
+ }
- PRINTK("check %d: state 0x%lx read %p write %p written %p\n",
- i, dev->flags, dev->toread, dev->towrite, dev->written);
- /* maybe we can reply to a read */
- if (test_bit(R5_UPTODATE, &dev->flags) && dev->toread) {
- struct bio *rbi, *rbi2;
- PRINTK("Return read for disc %d\n", i);
- spin_lock_irq(&conf->device_lock);
- rbi = dev->toread;
- dev->toread = NULL;
- if (test_and_clear_bit(R5_Overlap, &dev->flags))
+ /* fail any reads if this device is non-operational and
+ * the data has not reached the cache yet.
+ */
+ if (!test_bit(R5_Wantfill, &sh->dev[i].flags) &&
+ (!test_bit(R5_Insync, &sh->dev[i].flags) ||
+ test_bit(R5_ReadError, &sh->dev[i].flags))) {
+ bi = sh->dev[i].toread;
+ sh->dev[i].toread = NULL;
+ if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags))
wake_up(&conf->wait_for_overlap);
- spin_unlock_irq(&conf->device_lock);
- while (rbi && rbi->bi_sector < dev->sector + STRIPE_SECTORS) {
- copy_data(0, rbi, dev->page, dev->sector);
- rbi2 = r5_next_bio(rbi, dev->sector);
- spin_lock_irq(&conf->device_lock);
- if (--rbi->bi_phys_segments == 0) {
- rbi->bi_next = return_bi;
- return_bi = rbi;
+ if (bi) s->to_read--;
+ while (bi && bi->bi_sector <
+ sh->dev[i].sector + STRIPE_SECTORS) {
+ struct bio *nextbi =
+ r5_next_bio(bi, sh->dev[i].sector);
+ clear_bit(BIO_UPTODATE, &bi->bi_flags);
+ if (!raid5_dec_bi_phys_segments(bi)) {
+ bi->bi_next = *return_bi;
+ *return_bi = bi;
}
- spin_unlock_irq(&conf->device_lock);
- rbi = rbi2;
+ bi = nextbi;
}
}
+ spin_unlock_irq(&conf->device_lock);
+ if (bitmap_end)
+ bitmap_endwrite(conf->mddev->bitmap, sh->sector,
+ STRIPE_SECTORS, 0, 0);
+ }
- /* now count some things */
- if (test_bit(R5_LOCKED, &dev->flags)) locked++;
- if (test_bit(R5_UPTODATE, &dev->flags)) uptodate++;
+ if (test_and_clear_bit(STRIPE_FULL_WRITE, &sh->state))
+ if (atomic_dec_and_test(&conf->pending_full_writes))
+ md_wakeup_thread(conf->mddev->thread);
+}
-
- if (dev->toread) to_read++;
- if (dev->towrite) {
- to_write++;
- if (!test_bit(R5_OVERWRITE, &dev->flags))
- non_overwrite++;
+/* fetch_block5 - checks the given member device to see if its data needs
+ * to be read or computed to satisfy a request.
+ *
+ * Returns 1 when no more member devices need to be checked, otherwise returns
+ * 0 to tell the loop in handle_stripe_fill5 to continue
+ */
+static int fetch_block5(struct stripe_head *sh, struct stripe_head_state *s,
+ int disk_idx, int disks)
+{
+ struct r5dev *dev = &sh->dev[disk_idx];
+ struct r5dev *failed_dev = &sh->dev[s->failed_num];
+
+ /* is the data in this block needed, and can we get it? */
+ if (!test_bit(R5_LOCKED, &dev->flags) &&
+ !test_bit(R5_UPTODATE, &dev->flags) &&
+ (dev->toread ||
+ (dev->towrite && !test_bit(R5_OVERWRITE, &dev->flags)) ||
+ s->syncing || s->expanding ||
+ (s->failed &&
+ (failed_dev->toread ||
+ (failed_dev->towrite &&
+ !test_bit(R5_OVERWRITE, &failed_dev->flags)))))) {
+ /* We would like to get this block, possibly by computing it,
+ * otherwise read it if the backing disk is insync
+ */
+ if ((s->uptodate == disks - 1) &&
+ (s->failed && disk_idx == s->failed_num)) {
+ set_bit(STRIPE_COMPUTE_RUN, &sh->state);
+ set_bit(STRIPE_OP_COMPUTE_BLK, &s->ops_request);
+ set_bit(R5_Wantcompute, &dev->flags);
+ sh->ops.target = disk_idx;
+ s->req_compute = 1;
+ /* Careful: from this point on 'uptodate' is in the eye
+ * of raid5_run_ops which services 'compute' operations
+ * before writes. R5_Wantcompute flags a block that will
+ * be R5_UPTODATE by the time it is needed for a
+ * subsequent operation.
+ */
+ s->uptodate++;
+ return 1; /* uptodate + compute == disks */
+ } else if (test_bit(R5_Insync, &dev->flags)) {
+ set_bit(R5_LOCKED, &dev->flags);
+ set_bit(R5_Wantread, &dev->flags);
+ s->locked++;
+ pr_debug("Reading block %d (sync=%d)\n", disk_idx,
+ s->syncing);
}
- if (dev->written) written++;
- rdev = rcu_dereference(conf->disks[i].rdev);
- if (!rdev || !test_bit(In_sync, &rdev->flags)) {
- /* The ReadError flag will just be confusing now */
- clear_bit(R5_ReadError, &dev->flags);
- clear_bit(R5_ReWrite, &dev->flags);
- }
- if (!rdev || !test_bit(In_sync, &rdev->flags)
- || test_bit(R5_ReadError, &dev->flags)) {
- failed++;
- failed_num = i;
- } else
- set_bit(R5_Insync, &dev->flags);
}
- rcu_read_unlock();
- PRINTK("locked=%d uptodate=%d to_read=%d"
- " to_write=%d failed=%d failed_num=%d\n",
- locked, uptodate, to_read, to_write, failed, failed_num);
- /* check if the array has lost two devices and, if so, some requests might
- * need to be failed
+
+ return 0;
+}
+
+/**
+ * handle_stripe_fill5 - read or compute data to satisfy pending requests.
+ */
+static void handle_stripe_fill5(struct stripe_head *sh,
+ struct stripe_head_state *s, int disks)
+{
+ int i;
+
+ /* look for blocks to read/compute, skip this if a compute
+ * is already in flight, or if the stripe contents are in the
+ * midst of changing due to a write
*/
- if (failed > 1 && to_read+to_write+written) {
- for (i=disks; i--; ) {
- int bitmap_end = 0;
-
- if (test_bit(R5_ReadError, &sh->dev[i].flags)) {
- mdk_rdev_t *rdev;
- rcu_read_lock();
- rdev = rcu_dereference(conf->disks[i].rdev);
- if (rdev && test_bit(In_sync, &rdev->flags))
- /* multiple read failures in one stripe */
- md_error(conf->mddev, rdev);
- rcu_read_unlock();
+ if (!test_bit(STRIPE_COMPUTE_RUN, &sh->state) && !sh->check_state &&
+ !sh->reconstruct_state)
+ for (i = disks; i--; )
+ if (fetch_block5(sh, s, i, disks))
+ break;
+ set_bit(STRIPE_HANDLE, &sh->state);
+}
+
+static void handle_stripe_fill6(struct stripe_head *sh,
+ struct stripe_head_state *s, struct r6_state *r6s,
+ int disks)
+{
+ int i;
+ for (i = disks; i--; ) {
+ struct r5dev *dev = &sh->dev[i];
+ if (!test_bit(R5_LOCKED, &dev->flags) &&
+ !test_bit(R5_UPTODATE, &dev->flags) &&
+ (dev->toread || (dev->towrite &&
+ !test_bit(R5_OVERWRITE, &dev->flags)) ||
+ s->syncing || s->expanding ||
+ (s->failed >= 1 &&
+ (sh->dev[r6s->failed_num[0]].toread ||
+ s->to_write)) ||
+ (s->failed >= 2 &&
+ (sh->dev[r6s->failed_num[1]].toread ||
+ s->to_write)))) {
+ /* we would like to get this block, possibly
+ * by computing it, but we might not be able to
+ */
+ if ((s->uptodate == disks - 1) &&
+ (s->failed && (i == r6s->failed_num[0] ||
+ i == r6s->failed_num[1]))) {
+ pr_debug("Computing stripe %llu block %d\n",
+ (unsigned long long)sh->sector, i);
+ compute_block_1(sh, i, 0);
+ s->uptodate++;
+ } else if ( s->uptodate == disks-2 && s->failed >= 2 ) {
+ /* Computing 2-failure is *very* expensive; only
+ * do it if failed >= 2
+ */
+ int other;
+ for (other = disks; other--; ) {
+ if (other == i)
+ continue;
+ if (!test_bit(R5_UPTODATE,
+ &sh->dev[other].flags))
+ break;
+ }
+ BUG_ON(other < 0);
+ pr_debug("Computing stripe %llu blocks %d,%d\n",
+ (unsigned long long)sh->sector,
+ i, other);
+ compute_block_2(sh, i, other);
+ s->uptodate += 2;
+ } else if (test_bit(R5_Insync, &dev->flags)) {
+ set_bit(R5_LOCKED, &dev->flags);
+ set_bit(R5_Wantread, &dev->flags);
+ s->locked++;
+ pr_debug("Reading block %d (sync=%d)\n",
+ i, s->syncing);
}
+ }
+ }
+ set_bit(STRIPE_HANDLE, &sh->state);
+}
- spin_lock_irq(&conf->device_lock);
- /* fail all writes first */
- bi = sh->dev[i].towrite;
- sh->dev[i].towrite = NULL;
- if (bi) { to_write--; bitmap_end = 1; }
- if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags))
- wake_up(&conf->wait_for_overlap);
+/* handle_stripe_clean_event
+ * any written block on an uptodate or failed drive can be returned.
+ * Note that if we 'wrote' to a failed drive, it will be UPTODATE, but
+ * never LOCKED, so we don't need to test 'failed' directly.
+ */
+static void handle_stripe_clean_event(raid5_conf_t *conf,
+ struct stripe_head *sh, int disks, struct bio **return_bi)
+{
+ int i;
+ struct r5dev *dev;
- while (bi && bi->bi_sector < sh->dev[i].sector + STRIPE_SECTORS){
- struct bio *nextbi = r5_next_bio(bi, sh->dev[i].sector);
- clear_bit(BIO_UPTODATE, &bi->bi_flags);
- if (--bi->bi_phys_segments == 0) {
- md_write_end(conf->mddev);
- bi->bi_next = return_bi;
- return_bi = bi;
+ for (i = disks; i--; )
+ if (sh->dev[i].written) {
+ dev = &sh->dev[i];
+ if (!test_bit(R5_LOCKED, &dev->flags) &&
+ test_bit(R5_UPTODATE, &dev->flags)) {
+ /* We can return any write requests */
+ struct bio *wbi, *wbi2;
+ int bitmap_end = 0;
+ pr_debug("Return write for disc %d\n", i);
+ spin_lock_irq(&conf->device_lock);
+ wbi = dev->written;
+ dev->written = NULL;
+ while (wbi && wbi->bi_sector <
+ dev->sector + STRIPE_SECTORS) {
+ wbi2 = r5_next_bio(wbi, dev->sector);
+ if (!raid5_dec_bi_phys_segments(wbi)) {
+ md_write_end(conf->mddev);
+ wbi->bi_next = *return_bi;
+ *return_bi = wbi;
+ }
+ wbi = wbi2;
}
- bi = nextbi;
+ if (dev->towrite == NULL)
+ bitmap_end = 1;
+ spin_unlock_irq(&conf->device_lock);
+ if (bitmap_end)
+ bitmap_endwrite(conf->mddev->bitmap,
+ sh->sector,
+ STRIPE_SECTORS,
+ !test_bit(STRIPE_DEGRADED, &sh->state),
+ 0);
}
- /* and fail all 'written' */
- bi = sh->dev[i].written;
- sh->dev[i].written = NULL;
- if (bi) bitmap_end = 1;
- while (bi && bi->bi_sector < sh->dev[i].sector + STRIPE_SECTORS) {
- struct bio *bi2 = r5_next_bio(bi, sh->dev[i].sector);
- clear_bit(BIO_UPTODATE, &bi->bi_flags);
- if (--bi->bi_phys_segments == 0) {
- md_write_end(conf->mddev);
- bi->bi_next = return_bi;
- return_bi = bi;
+ }
+
+ if (test_and_clear_bit(STRIPE_FULL_WRITE, &sh->state))
+ if (atomic_dec_and_test(&conf->pending_full_writes))
+ md_wakeup_thread(conf->mddev->thread);
+}
+
+static void handle_stripe_dirtying5(raid5_conf_t *conf,
+ struct stripe_head *sh, struct stripe_head_state *s, int disks)
+{
+ int rmw = 0, rcw = 0, i;
+ for (i = disks; i--; ) {
+ /* would I have to read this buffer for read_modify_write */
+ struct r5dev *dev = &sh->dev[i];
+ if ((dev->towrite || i == sh->pd_idx) &&
+ !test_bit(R5_LOCKED, &dev->flags) &&
+ !(test_bit(R5_UPTODATE, &dev->flags) ||
+ test_bit(R5_Wantcompute, &dev->flags))) {
+ if (test_bit(R5_Insync, &dev->flags))
+ rmw++;
+ else
+ rmw += 2*disks; /* cannot read it */
+ }
+ /* Would I have to read this buffer for reconstruct_write */
+ if (!test_bit(R5_OVERWRITE, &dev->flags) && i != sh->pd_idx &&
+ !test_bit(R5_LOCKED, &dev->flags) &&
+ !(test_bit(R5_UPTODATE, &dev->flags) ||
+ test_bit(R5_Wantcompute, &dev->flags))) {
+ if (test_bit(R5_Insync, &dev->flags)) rcw++;
+ else
+ rcw += 2*disks;
+ }
+ }
+ pr_debug("for sector %llu, rmw=%d rcw=%d\n",
+ (unsigned long long)sh->sector, rmw, rcw);
+ set_bit(STRIPE_HANDLE, &sh->state);
+ if (rmw < rcw && rmw > 0)
+ /* prefer read-modify-write, but need to get some data */
+ for (i = disks; i--; ) {
+ struct r5dev *dev = &sh->dev[i];
+ if ((dev->towrite || i == sh->pd_idx) &&
+ !test_bit(R5_LOCKED, &dev->flags) &&
+ !(test_bit(R5_UPTODATE, &dev->flags) ||
+ test_bit(R5_Wantcompute, &dev->flags)) &&
+ test_bit(R5_Insync, &dev->flags)) {
+ if (
+ test_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) {
+ pr_debug("Read_old block "
+ "%d for r-m-w\n", i);
+ set_bit(R5_LOCKED, &dev->flags);
+ set_bit(R5_Wantread, &dev->flags);
+ s->locked++;
+ } else {
+ set_bit(STRIPE_DELAYED, &sh->state);
+ set_bit(STRIPE_HANDLE, &sh->state);
}
- bi = bi2;
}
-
- /* fail any reads if this device is non-operational */
- if (!test_bit(R5_Insync, &sh->dev[i].flags) ||
- test_bit(R5_ReadError, &sh->dev[i].flags)) {
- bi = sh->dev[i].toread;
- sh->dev[i].toread = NULL;
- if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags))
- wake_up(&conf->wait_for_overlap);
- if (bi) to_read--;
- while (bi && bi->bi_sector < sh->dev[i].sector + STRIPE_SECTORS){
- struct bio *nextbi = r5_next_bio(bi, sh->dev[i].sector);
- clear_bit(BIO_UPTODATE, &bi->bi_flags);
- if (--bi->bi_phys_segments == 0) {
- bi->bi_next = return_bi;
- return_bi = bi;
- }
- bi = nextbi;
+ }
+ if (rcw <= rmw && rcw > 0)
+ /* want reconstruct write, but need to get some data */
+ for (i = disks; i--; ) {
+ struct r5dev *dev = &sh->dev[i];
+ if (!test_bit(R5_OVERWRITE, &dev->flags) &&
+ i != sh->pd_idx &&
+ !test_bit(R5_LOCKED, &dev->flags) &&
+ !(test_bit(R5_UPTODATE, &dev->flags) ||
+ test_bit(R5_Wantcompute, &dev->flags)) &&
+ test_bit(R5_Insync, &dev->flags)) {
+ if (
+ test_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) {
+ pr_debug("Read_old block "
+ "%d for Reconstruct\n", i);
+ set_bit(R5_LOCKED, &dev->flags);
+ set_bit(R5_Wantread, &dev->flags);
+ s->locked++;
+ } else {
+ set_bit(STRIPE_DELAYED, &sh->state);
+ set_bit(STRIPE_HANDLE, &sh->state);
}
}
- spin_unlock_irq(&conf->device_lock);
- if (bitmap_end)
- bitmap_endwrite(conf->mddev->bitmap, sh->sector,
- STRIPE_SECTORS, 0, 0);
}
- }
- if (failed > 1 && syncing) {
- md_done_sync(conf->mddev, STRIPE_SECTORS,0);
- clear_bit(STRIPE_SYNCING, &sh->state);
- syncing = 0;
- }
-
- /* might be able to return some write requests if the parity block
- * is safe, or on a failed drive
+ /* now if nothing is locked, and if we have enough data,
+ * we can start a write request
*/
- dev = &sh->dev[sh->pd_idx];
- if ( written &&
- ( (test_bit(R5_Insync, &dev->flags) && !test_bit(R5_LOCKED, &dev->flags) &&
- test_bit(R5_UPTODATE, &dev->flags))
- || (failed == 1 && failed_num == sh->pd_idx))
- ) {
- /* any written block on an uptodate or failed drive can be returned.
- * Note that if we 'wrote' to a failed drive, it will be UPTODATE, but
- * never LOCKED, so we don't need to test 'failed' directly.
- */
- for (i=disks; i--; )
- if (sh->dev[i].written) {
- dev = &sh->dev[i];
- if (!test_bit(R5_LOCKED, &dev->flags) &&
- test_bit(R5_UPTODATE, &dev->flags) ) {
- /* We can return any write requests */
- struct bio *wbi, *wbi2;
- int bitmap_end = 0;
- PRINTK("Return write for disc %d\n", i);
- spin_lock_irq(&conf->device_lock);
- wbi = dev->written;
- dev->written = NULL;
- while (wbi && wbi->bi_sector < dev->sector + STRIPE_SECTORS) {
- wbi2 = r5_next_bio(wbi, dev->sector);
- if (--wbi->bi_phys_segments == 0) {
- md_write_end(conf->mddev);
- wbi->bi_next = return_bi;
- return_bi = wbi;
- }
- wbi = wbi2;
- }
- if (dev->towrite == NULL)
- bitmap_end = 1;
- spin_unlock_irq(&conf->device_lock);
- if (bitmap_end)
- bitmap_endwrite(conf->mddev->bitmap, sh->sector,
- STRIPE_SECTORS,
- !test_bit(STRIPE_DEGRADED, &sh->state), 0);
- }
+ /* since handle_stripe can be called at any time we need to handle the
+ * case where a compute block operation has been submitted and then a
+ * subsequent call wants to start a write request. raid5_run_ops only
+ * handles the case where compute block and postxor are requested
+ * simultaneously. If this is not the case then new writes need to be
+ * held off until the compute completes.
+ */
+ if ((s->req_compute || !test_bit(STRIPE_COMPUTE_RUN, &sh->state)) &&
+ (s->locked == 0 && (rcw == 0 || rmw == 0) &&
+ !test_bit(STRIPE_BIT_DELAY, &sh->state)))
+ schedule_reconstruction5(sh, s, rcw == 0, 0);
+}
+
+static void handle_stripe_dirtying6(raid5_conf_t *conf,
+ struct stripe_head *sh, struct stripe_head_state *s,
+ struct r6_state *r6s, int disks)
+{
+ int rcw = 0, must_compute = 0, pd_idx = sh->pd_idx, i;
+ int qd_idx = sh->qd_idx;
+ for (i = disks; i--; ) {
+ struct r5dev *dev = &sh->dev[i];
+ /* Would I have to read this buffer for reconstruct_write */
+ if (!test_bit(R5_OVERWRITE, &dev->flags)
+ && i != pd_idx && i != qd_idx
+ && (!test_bit(R5_LOCKED, &dev->flags)
+ ) &&
+ !test_bit(R5_UPTODATE, &dev->flags)) {
+ if (test_bit(R5_Insync, &dev->flags)) rcw++;
+ else {
+ pr_debug("raid6: must_compute: "
+ "disk %d flags=%#lx\n", i, dev->flags);
+ must_compute++;
+ }
}
}
+ pr_debug("for sector %llu, rcw=%d, must_compute=%d\n",
+ (unsigned long long)sh->sector, rcw, must_compute);
+ set_bit(STRIPE_HANDLE, &sh->state);
- /* Now we might consider reading some blocks, either to check/generate
- * parity, or to satisfy requests
- * or to load a block that is being partially written.
- */
- if (to_read || non_overwrite || (syncing && (uptodate < disks)) || expanding) {
- for (i=disks; i--;) {
- dev = &sh->dev[i];
- if (!test_bit(R5_LOCKED, &dev->flags) && !test_bit(R5_UPTODATE, &dev->flags) &&
- (dev->toread ||
- (dev->towrite && !test_bit(R5_OVERWRITE, &dev->flags)) ||
- syncing ||
- expanding ||
- (failed && (sh->dev[failed_num].toread ||
- (sh->dev[failed_num].towrite && !test_bit(R5_OVERWRITE, &sh->dev[failed_num].flags))))
- )
- ) {
- /* we would like to get this block, possibly
- * by computing it, but we might not be able to
- */
- if (uptodate == disks-1) {
- PRINTK("Computing block %d\n", i);
- compute_block(sh, i);
- uptodate++;
- } else if (test_bit(R5_Insync, &dev->flags)) {
+ if (rcw > 0)
+ /* want reconstruct write, but need to get some data */
+ for (i = disks; i--; ) {
+ struct r5dev *dev = &sh->dev[i];
+ if (!test_bit(R5_OVERWRITE, &dev->flags)
+ && !(s->failed == 0 && (i == pd_idx || i == qd_idx))
+ && !test_bit(R5_LOCKED, &dev->flags) &&
+ !test_bit(R5_UPTODATE, &dev->flags) &&
+ test_bit(R5_Insync, &dev->flags)) {
+ if (
+ test_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) {
+ pr_debug("Read_old stripe %llu "
+ "block %d for Reconstruct\n",
+ (unsigned long long)sh->sector, i);
set_bit(R5_LOCKED, &dev->flags);
set_bit(R5_Wantread, &dev->flags);
-#if 0
- /* if I am just reading this block and we don't have
- a failed drive, or any pending writes then sidestep the cache */
- if (sh->bh_read[i] && !sh->bh_read[i]->b_reqnext &&
- ! syncing && !failed && !to_write) {
- sh->bh_cache[i]->b_page = sh->bh_read[i]->b_page;
- sh->bh_cache[i]->b_data = sh->bh_read[i]->b_data;
- }
-#endif
- locked++;
- PRINTK("Reading block %d (sync=%d)\n",
- i, syncing);
+ s->locked++;
+ } else {
+ pr_debug("Request delayed stripe %llu "
+ "block %d for Reconstruct\n",
+ (unsigned long long)sh->sector, i);
+ set_bit(STRIPE_DELAYED, &sh->state);
+ set_bit(STRIPE_HANDLE, &sh->state);
}
}
}
- set_bit(STRIPE_HANDLE, &sh->state);
+ /* now if nothing is locked, and if we have enough data, we can start a
+ * write request
+ */
+ if (s->locked == 0 && rcw == 0 &&
+ !test_bit(STRIPE_BIT_DELAY, &sh->state)) {
+ if (must_compute > 0) {
+ /* We have failed blocks and need to compute them */
+ switch (s->failed) {
+ case 0:
+ BUG();
+ case 1:
+ compute_block_1(sh, r6s->failed_num[0], 0);
+ break;
+ case 2:
+ compute_block_2(sh, r6s->failed_num[0],
+ r6s->failed_num[1]);
+ break;
+ default: /* This request should have been failed? */
+ BUG();
+ }
+ }
+
+ pr_debug("Computing parity for stripe %llu\n",
+ (unsigned long long)sh->sector);
+ compute_parity6(sh, RECONSTRUCT_WRITE);
+ /* now every locked buffer is ready to be written */
+ for (i = disks; i--; )
+ if (test_bit(R5_LOCKED, &sh->dev[i].flags)) {
+ pr_debug("Writing stripe %llu block %d\n",
+ (unsigned long long)sh->sector, i);
+ s->locked++;
+ set_bit(R5_Wantwrite, &sh->dev[i].flags);
+ }
+ if (s->locked == disks)
+ if (!test_and_set_bit(STRIPE_FULL_WRITE, &sh->state))
+ atomic_inc(&conf->pending_full_writes);
+ /* after a RECONSTRUCT_WRITE, the stripe MUST be in-sync */
+ set_bit(STRIPE_INSYNC, &sh->state);
+
+ if (test_and_clear_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) {
+ atomic_dec(&conf->preread_active_stripes);
+ if (atomic_read(&conf->preread_active_stripes) <
+ IO_THRESHOLD)
+ md_wakeup_thread(conf->mddev->thread);
+ }
}
+}
- /* now to consider writing and what else, if anything should be read */
- if (to_write) {
- int rmw=0, rcw=0;
- for (i=disks ; i--;) {
- /* would I have to read this buffer for read_modify_write */
- dev = &sh->dev[i];
- if ((dev->towrite || i == sh->pd_idx) &&
- (!test_bit(R5_LOCKED, &dev->flags)
-#if 0
-|| sh->bh_page[i]!=bh->b_page
-#endif
- ) &&
- !test_bit(R5_UPTODATE, &dev->flags)) {
- if (test_bit(R5_Insync, &dev->flags)
-/* && !(!mddev->insync && i == sh->pd_idx) */
- )
- rmw++;
- else rmw += 2*disks; /* cannot read it */
+static void handle_parity_checks5(raid5_conf_t *conf, struct stripe_head *sh,
+ struct stripe_head_state *s, int disks)
+{
+ struct r5dev *dev = NULL;
+
+ set_bit(STRIPE_HANDLE, &sh->state);
+
+ switch (sh->check_state) {
+ case check_state_idle:
+ /* start a new check operation if there are no failures */
+ if (s->failed == 0) {
+ BUG_ON(s->uptodate != disks);
+ sh->check_state = check_state_run;
+ set_bit(STRIPE_OP_CHECK, &s->ops_request);
+ clear_bit(R5_UPTODATE, &sh->dev[sh->pd_idx].flags);
+ s->uptodate--;
+ break;
+ }
+ dev = &sh->dev[s->failed_num];
+ /* fall through */
+ case check_state_compute_result:
+ sh->check_state = check_state_idle;
+ if (!dev)
+ dev = &sh->dev[sh->pd_idx];
+
+ /* check that a write has not made the stripe insync */
+ if (test_bit(STRIPE_INSYNC, &sh->state))
+ break;
+
+ /* either failed parity check, or recovery is happening */
+ BUG_ON(!test_bit(R5_UPTODATE, &dev->flags));
+ BUG_ON(s->uptodate != disks);
+
+ set_bit(R5_LOCKED, &dev->flags);
+ s->locked++;
+ set_bit(R5_Wantwrite, &dev->flags);
+
+ clear_bit(STRIPE_DEGRADED, &sh->state);
+ set_bit(STRIPE_INSYNC, &sh->state);
+ break;
+ case check_state_run:
+ break; /* we will be called again upon completion */
+ case check_state_check_result:
+ sh->check_state = check_state_idle;
+
+ /* if a failure occurred during the check operation, leave
+ * STRIPE_INSYNC not set and let the stripe be handled again
+ */
+ if (s->failed)
+ break;
+
+ /* handle a successful check operation, if parity is correct
+ * we are done. Otherwise update the mismatch count and repair
+ * parity if !MD_RECOVERY_CHECK
+ */
+ if (sh->ops.zero_sum_result == 0)
+ /* parity is correct (on disc,
+ * not in buffer any more)
+ */
+ set_bit(STRIPE_INSYNC, &sh->state);
+ else {
+ conf->mddev->resync_mismatches += STRIPE_SECTORS;
+ if (test_bit(MD_RECOVERY_CHECK, &conf->mddev->recovery))
+ /* don't try to repair!! */
+ set_bit(STRIPE_INSYNC, &sh->state);
+ else {
+ sh->check_state = check_state_compute_run;
+ set_bit(STRIPE_COMPUTE_RUN, &sh->state);
+ set_bit(STRIPE_OP_COMPUTE_BLK, &s->ops_request);
+ set_bit(R5_Wantcompute,
+ &sh->dev[sh->pd_idx].flags);
+ sh->ops.target = sh->pd_idx;
+ s->uptodate++;
}
- /* Would I have to read this buffer for reconstruct_write */
- if (!test_bit(R5_OVERWRITE, &dev->flags) && i != sh->pd_idx &&
- (!test_bit(R5_LOCKED, &dev->flags)
-#if 0
-|| sh->bh_page[i] != bh->b_page
-#endif
- ) &&
- !test_bit(R5_UPTODATE, &dev->flags)) {
- if (test_bit(R5_Insync, &dev->flags)) rcw++;
- else rcw += 2*disks;
+ }
+ break;
+ case check_state_compute_run:
+ break;
+ default:
+ printk(KERN_ERR "%s: unknown check_state: %d sector: %llu\n",
+ __func__, sh->check_state,
+ (unsigned long long) sh->sector);
+ BUG();
+ }
+}
+
+
+static void handle_parity_checks6(raid5_conf_t *conf, struct stripe_head *sh,
+ struct stripe_head_state *s,
+ struct r6_state *r6s, struct page *tmp_page,
+ int disks)
+{
+ int update_p = 0, update_q = 0;
+ struct r5dev *dev;
+ int pd_idx = sh->pd_idx;
+ int qd_idx = sh->qd_idx;
+
+ set_bit(STRIPE_HANDLE, &sh->state);
+
+ BUG_ON(s->failed > 2);
+ BUG_ON(s->uptodate < disks);
+ /* Want to check and possibly repair P and Q.
+ * However there could be one 'failed' device, in which
+ * case we can only check one of them, possibly using the
+ * other to generate missing data
+ */
+
+ /* If !tmp_page, we cannot do the calculations,
+ * but as we have set STRIPE_HANDLE, we will soon be called
+ * by stripe_handle with a tmp_page - just wait until then.
+ */
+ if (tmp_page) {
+ if (s->failed == r6s->q_failed) {
+ /* The only possible failed device holds 'Q', so it
+ * makes sense to check P (If anything else were failed,
+ * we would have used P to recreate it).
+ */
+ compute_block_1(sh, pd_idx, 1);
+ if (!page_is_zero(sh->dev[pd_idx].page)) {
+ compute_block_1(sh, pd_idx, 0);
+ update_p = 1;
}
}
- PRINTK("for sector %llu, rmw=%d rcw=%d\n",
- (unsigned long long)sh->sector, rmw, rcw);
- set_bit(STRIPE_HANDLE, &sh->state);
- if (rmw < rcw && rmw > 0)
- /* prefer read-modify-write, but need to get some data */
- for (i=disks; i--;) {
- dev = &sh->dev[i];
- if ((dev->towrite || i == sh->pd_idx) &&
- !test_bit(R5_LOCKED, &dev->flags) && !test_bit(R5_UPTODATE, &dev->flags) &&
- test_bit(R5_Insync, &dev->flags)) {
- if (test_bit(STRIPE_PREREAD_ACTIVE, &sh->state))
- {
- PRINTK("Read_old block %d for r-m-w\n", i);
- set_bit(R5_LOCKED, &dev->flags);
- set_bit(R5_Wantread, &dev->flags);
- locked++;
- } else {
- set_bit(STRIPE_DELAYED, &sh->state);
- set_bit(STRIPE_HANDLE, &sh->state);
- }
- }
+ if (!r6s->q_failed && s->failed < 2) {
+ /* q is not failed, and we didn't use it to generate
+ * anything, so it makes sense to check it
+ */
+ memcpy(page_address(tmp_page),
+ page_address(sh->dev[qd_idx].page),
+ STRIPE_SIZE);
+ compute_parity6(sh, UPDATE_PARITY);
+ if (memcmp(page_address(tmp_page),
+ page_address(sh->dev[qd_idx].page),
+ STRIPE_SIZE) != 0) {
+ clear_bit(STRIPE_INSYNC, &sh->state);
+ update_q = 1;
}
- if (rcw <= rmw && rcw > 0)
- /* want reconstruct write, but need to get some data */
- for (i=disks; i--;) {
- dev = &sh->dev[i];
- if (!test_bit(R5_OVERWRITE, &dev->flags) && i != sh->pd_idx &&
- !test_bit(R5_LOCKED, &dev->flags) && !test_bit(R5_UPTODATE, &dev->flags) &&
- test_bit(R5_Insync, &dev->flags)) {
- if (test_bit(STRIPE_PREREAD_ACTIVE, &sh->state))
- {
- PRINTK("Read_old block %d for Reconstruct\n", i);
- set_bit(R5_LOCKED, &dev->flags);
- set_bit(R5_Wantread, &dev->flags);
- locked++;
- } else {
- set_bit(STRIPE_DELAYED, &sh->state);
- set_bit(STRIPE_HANDLE, &sh->state);
- }
- }
+ }
+ if (update_p || update_q) {
+ conf->mddev->resync_mismatches += STRIPE_SECTORS;
+ if (test_bit(MD_RECOVERY_CHECK, &conf->mddev->recovery))
+ /* don't try to repair!! */
+ update_p = update_q = 0;
+ }
+
+ /* now write out any block on a failed drive,
+ * or P or Q if they need it
+ */
+
+ if (s->failed == 2) {
+ dev = &sh->dev[r6s->failed_num[1]];
+ s->locked++;
+ set_bit(R5_LOCKED, &dev->flags);
+ set_bit(R5_Wantwrite, &dev->flags);
+ }
+ if (s->failed >= 1) {
+ dev = &sh->dev[r6s->failed_num[0]];
+ s->locked++;
+ set_bit(R5_LOCKED, &dev->flags);
+ set_bit(R5_Wantwrite, &dev->flags);
+ }
+
+ if (update_p) {
+ dev = &sh->dev[pd_idx];
+ s->locked++;
+ set_bit(R5_LOCKED, &dev->flags);
+ set_bit(R5_Wantwrite, &dev->flags);
+ }
+ if (update_q) {
+ dev = &sh->dev[qd_idx];
+ s->locked++;
+ set_bit(R5_LOCKED, &dev->flags);
+ set_bit(R5_Wantwrite, &dev->flags);
+ }
+ clear_bit(STRIPE_DEGRADED, &sh->state);
+
+ set_bit(STRIPE_INSYNC, &sh->state);
+ }
+}
+
+static void handle_stripe_expansion(raid5_conf_t *conf, struct stripe_head *sh,
+ struct r6_state *r6s)
+{
+ int i;
+
+ /* We have read all the blocks in this stripe and now we need to
+ * copy some of them into a target stripe for expand.
+ */
+ struct dma_async_tx_descriptor *tx = NULL;
+ clear_bit(STRIPE_EXPAND_SOURCE, &sh->state);
+ for (i = 0; i < sh->disks; i++)
+ if (i != sh->pd_idx && i != sh->qd_idx) {
+ int dd_idx, j;
+ struct stripe_head *sh2;
+
+ sector_t bn = compute_blocknr(sh, i, 1);
+ sector_t s = raid5_compute_sector(conf, bn, 0,
+ &dd_idx, NULL);
+ sh2 = get_active_stripe(conf, s, 0, 1);
+ if (sh2 == NULL)
+ /* so far only the early blocks of this stripe
+ * have been requested. When later blocks
+ * get requested, we will try again
+ */
+ continue;
+ if (!test_bit(STRIPE_EXPANDING, &sh2->state) ||
+ test_bit(R5_Expanded, &sh2->dev[dd_idx].flags)) {
+ /* must have already done this block */
+ release_stripe(sh2);
+ continue;
}
- /* now if nothing is locked, and if we have enough data, we can start a write request */
- if (locked == 0 && (rcw == 0 ||rmw == 0) &&
- !test_bit(STRIPE_BIT_DELAY, &sh->state)) {
- PRINTK("Computing parity...\n");
- compute_parity5(sh, rcw==0 ? RECONSTRUCT_WRITE : READ_MODIFY_WRITE);
- /* now every locked buffer is ready to be written */
- for (i=disks; i--;)
- if (test_bit(R5_LOCKED, &sh->dev[i].flags)) {
- PRINTK("Writing block %d\n", i);
- locked++;
- set_bit(R5_Wantwrite, &sh->dev[i].flags);
- if (!test_bit(R5_Insync, &sh->dev[i].flags)
- || (i==sh->pd_idx && failed == 0))
- set_bit(STRIPE_INSYNC, &sh->state);
- }
- if (test_and_clear_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) {
- atomic_dec(&conf->preread_active_stripes);
- if (atomic_read(&conf->preread_active_stripes) < IO_THRESHOLD)
- md_wakeup_thread(conf->mddev->thread);
+
+ /* place all the copies on one channel */
+ tx = async_memcpy(sh2->dev[dd_idx].page,
+ sh->dev[i].page, 0, 0, STRIPE_SIZE,
+ ASYNC_TX_DEP_ACK, tx, NULL, NULL);
+
+ set_bit(R5_Expanded, &sh2->dev[dd_idx].flags);
+ set_bit(R5_UPTODATE, &sh2->dev[dd_idx].flags);
+ for (j = 0; j < conf->raid_disks; j++)
+ if (j != sh2->pd_idx &&
+ (!r6s || j != sh2->qd_idx) &&
+ !test_bit(R5_Expanded, &sh2->dev[j].flags))
+ break;
+ if (j == conf->raid_disks) {
+ set_bit(STRIPE_EXPAND_READY, &sh2->state);
+ set_bit(STRIPE_HANDLE, &sh2->state);
}
+ release_stripe(sh2);
+
}
+ /* done submitting copies, wait for them to complete */
+ if (tx) {
+ async_tx_ack(tx);
+ dma_wait_for_async_tx(tx);
}
+}
- /* maybe we need to check and possibly fix the parity for this stripe
- * Any reads will already have been scheduled, so we just see if enough data
- * is available
+
+/*
+ * handle_stripe - do things to a stripe.
+ *
+ * We lock the stripe and then examine the state of various bits
+ * to see what needs to be done.
+ * Possible results:
+ * return some read request which now have data
+ * return some write requests which are safely on disc
+ * schedule a read on some buffers
+ * schedule a write of some buffers
+ * return confirmation of parity correctness
+ *
+ * buffers are taken off read_list or write_list, and bh_cache buffers
+ * get BH_Lock set before the stripe lock is released.
+ *
+ */
+
+static bool handle_stripe5(struct stripe_head *sh)
+{
+ raid5_conf_t *conf = sh->raid_conf;
+ int disks = sh->disks, i;
+ struct bio *return_bi = NULL;
+ struct stripe_head_state s;
+ struct r5dev *dev;
+ mdk_rdev_t *blocked_rdev = NULL;
+ int prexor;
+
+ memset(&s, 0, sizeof(s));
+ pr_debug("handling stripe %llu, state=%#lx cnt=%d, pd_idx=%d check:%d "
+ "reconstruct:%d\n", (unsigned long long)sh->sector, sh->state,
+ atomic_read(&sh->count), sh->pd_idx, sh->check_state,
+ sh->reconstruct_state);
+
+ spin_lock(&sh->lock);
+ clear_bit(STRIPE_HANDLE, &sh->state);
+ clear_bit(STRIPE_DELAYED, &sh->state);
+
+ s.syncing = test_bit(STRIPE_SYNCING, &sh->state);
+ s.expanding = test_bit(STRIPE_EXPAND_SOURCE, &sh->state);
+ s.expanded = test_bit(STRIPE_EXPAND_READY, &sh->state);
+
+ /* Now to look around and see what can be done */
+ rcu_read_lock();
+ for (i=disks; i--; ) {
+ mdk_rdev_t *rdev;
+ struct r5dev *dev = &sh->dev[i];
+ clear_bit(R5_Insync, &dev->flags);
+
+ pr_debug("check %d: state 0x%lx toread %p read %p write %p "
+ "written %p\n", i, dev->flags, dev->toread, dev->read,
+ dev->towrite, dev->written);
+
+ /* maybe we can request a biofill operation
+ *
+ * new wantfill requests are only permitted while
+ * ops_complete_biofill is guaranteed to be inactive
+ */
+ if (test_bit(R5_UPTODATE, &dev->flags) && dev->toread &&
+ !test_bit(STRIPE_BIOFILL_RUN, &sh->state))
+ set_bit(R5_Wantfill, &dev->flags);
+
+ /* now count some things */
+ if (test_bit(R5_LOCKED, &dev->flags)) s.locked++;
+ if (test_bit(R5_UPTODATE, &dev->flags)) s.uptodate++;
+ if (test_bit(R5_Wantcompute, &dev->flags)) s.compute++;
+
+ if (test_bit(R5_Wantfill, &dev->flags))
+ s.to_fill++;
+ else if (dev->toread)
+ s.to_read++;
+ if (dev->towrite) {
+ s.to_write++;
+ if (!test_bit(R5_OVERWRITE, &dev->flags))
+ s.non_overwrite++;
+ }
+ if (dev->written)
+ s.written++;
+ rdev = rcu_dereference(conf->disks[i].rdev);
+ if (blocked_rdev == NULL &&
+ rdev && unlikely(test_bit(Blocked, &rdev->flags))) {
+ blocked_rdev = rdev;
+ atomic_inc(&rdev->nr_pending);
+ }
+ if (!rdev || !test_bit(In_sync, &rdev->flags)) {
+ /* The ReadError flag will just be confusing now */
+ clear_bit(R5_ReadError, &dev->flags);
+ clear_bit(R5_ReWrite, &dev->flags);
+ }
+ if (!rdev || !test_bit(In_sync, &rdev->flags)
+ || test_bit(R5_ReadError, &dev->flags)) {
+ s.failed++;
+ s.failed_num = i;
+ } else
+ set_bit(R5_Insync, &dev->flags);
+ }
+ rcu_read_unlock();
+
+ if (unlikely(blocked_rdev)) {
+ if (s.syncing || s.expanding || s.expanded ||
+ s.to_write || s.written) {
+ set_bit(STRIPE_HANDLE, &sh->state);
+ goto unlock;
+ }
+ /* There is nothing for the blocked_rdev to block */
+ rdev_dec_pending(blocked_rdev, conf->mddev);
+ blocked_rdev = NULL;
+ }
+
+ if (s.to_fill && !test_bit(STRIPE_BIOFILL_RUN, &sh->state)) {
+ set_bit(STRIPE_OP_BIOFILL, &s.ops_request);
+ set_bit(STRIPE_BIOFILL_RUN, &sh->state);
+ }
+
+ pr_debug("locked=%d uptodate=%d to_read=%d"
+ " to_write=%d failed=%d failed_num=%d\n",
+ s.locked, s.uptodate, s.to_read, s.to_write,
+ s.failed, s.failed_num);
+ /* check if the array has lost two devices and, if so, some requests might
+ * need to be failed
*/
- if (syncing && locked == 0 &&
- !test_bit(STRIPE_INSYNC, &sh->state)) {
- set_bit(STRIPE_HANDLE, &sh->state);
- if (failed == 0) {
- BUG_ON(uptodate != disks);
- compute_parity5(sh, CHECK_PARITY);
- uptodate--;
- if (page_is_zero(sh->dev[sh->pd_idx].page)) {
- /* parity is correct (on disc, not in buffer any more) */
- set_bit(STRIPE_INSYNC, &sh->state);
- } else {
- conf->mddev->resync_mismatches += STRIPE_SECTORS;
- if (test_bit(MD_RECOVERY_CHECK, &conf->mddev->recovery))
- /* don't try to repair!! */
+ if (s.failed > 1 && s.to_read+s.to_write+s.written)
+ handle_failed_stripe(conf, sh, &s, disks, &return_bi);
+ if (s.failed > 1 && s.syncing) {
+ md_done_sync(conf->mddev, STRIPE_SECTORS,0);
+ clear_bit(STRIPE_SYNCING, &sh->state);
+ s.syncing = 0;
+ }
+
+ /* might be able to return some write requests if the parity block
+ * is safe, or on a failed drive
+ */
+ dev = &sh->dev[sh->pd_idx];
+ if ( s.written &&
+ ((test_bit(R5_Insync, &dev->flags) &&
+ !test_bit(R5_LOCKED, &dev->flags) &&
+ test_bit(R5_UPTODATE, &dev->flags)) ||
+ (s.failed == 1 && s.failed_num == sh->pd_idx)))
+ handle_stripe_clean_event(conf, sh, disks, &return_bi);
+
+ /* Now we might consider reading some blocks, either to check/generate
+ * parity, or to satisfy requests
+ * or to load a block that is being partially written.
+ */
+ if (s.to_read || s.non_overwrite ||
+ (s.syncing && (s.uptodate + s.compute < disks)) || s.expanding)
+ handle_stripe_fill5(sh, &s, disks);
+
+ /* Now we check to see if any write operations have recently
+ * completed
+ */
+ prexor = 0;
+ if (sh->reconstruct_state == reconstruct_state_prexor_drain_result)
+ prexor = 1;
+ if (sh->reconstruct_state == reconstruct_state_drain_result ||
+ sh->reconstruct_state == reconstruct_state_prexor_drain_result) {
+ sh->reconstruct_state = reconstruct_state_idle;
+
+ /* All the 'written' buffers and the parity block are ready to
+ * be written back to disk
+ */
+ BUG_ON(!test_bit(R5_UPTODATE, &sh->dev[sh->pd_idx].flags));
+ for (i = disks; i--; ) {
+ dev = &sh->dev[i];
+ if (test_bit(R5_LOCKED, &dev->flags) &&
+ (i == sh->pd_idx || dev->written)) {
+ pr_debug("Writing block %d\n", i);
+ set_bit(R5_Wantwrite, &dev->flags);
+ if (prexor)
+ continue;
+ if (!test_bit(R5_Insync, &dev->flags) ||
+ (i == sh->pd_idx && s.failed == 0))
set_bit(STRIPE_INSYNC, &sh->state);
- else {
- compute_block(sh, sh->pd_idx);
- uptodate++;
- }
}
}
- if (!test_bit(STRIPE_INSYNC, &sh->state)) {
- /* either failed parity check, or recovery is happening */
- if (failed==0)
- failed_num = sh->pd_idx;
- dev = &sh->dev[failed_num];
- BUG_ON(!test_bit(R5_UPTODATE, &dev->flags));
- BUG_ON(uptodate != disks);
-
- set_bit(R5_LOCKED, &dev->flags);
- set_bit(R5_Wantwrite, &dev->flags);
- clear_bit(STRIPE_DEGRADED, &sh->state);
- locked++;
- set_bit(STRIPE_INSYNC, &sh->state);
+ if (test_and_clear_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) {
+ atomic_dec(&conf->preread_active_stripes);
+ if (atomic_read(&conf->preread_active_stripes) <
+ IO_THRESHOLD)
+ md_wakeup_thread(conf->mddev->thread);
}
}
- if (syncing && locked == 0 && test_bit(STRIPE_INSYNC, &sh->state)) {
+
+ /* Now to consider new write requests and what else, if anything
+ * should be read. We do not handle new writes when:
+ * 1/ A 'write' operation (copy+xor) is already in flight.
+ * 2/ A 'check' operation is in flight, as it may clobber the parity
+ * block.
+ */
+ if (s.to_write && !sh->reconstruct_state && !sh->check_state)
+ handle_stripe_dirtying5(conf, sh, &s, disks);
+
+ /* maybe we need to check and possibly fix the parity for this stripe
+ * Any reads will already have been scheduled, so we just see if enough
+ * data is available. The parity check is held off while parity
+ * dependent operations are in flight.
+ */
+ if (sh->check_state ||
+ (s.syncing && s.locked == 0 &&
+ !test_bit(STRIPE_COMPUTE_RUN, &sh->state) &&
+ !test_bit(STRIPE_INSYNC, &sh->state)))
+ handle_parity_checks5(conf, sh, &s, disks);
+
+ if (s.syncing && s.locked == 0 && test_bit(STRIPE_INSYNC, &sh->state)) {
md_done_sync(conf->mddev, STRIPE_SECTORS,1);
clear_bit(STRIPE_SYNCING, &sh->state);
}
/* If the failed drive is just a ReadError, then we might need to progress
* the repair/check process
*/
- if (failed == 1 && ! conf->mddev->ro &&
- test_bit(R5_ReadError, &sh->dev[failed_num].flags)
- && !test_bit(R5_LOCKED, &sh->dev[failed_num].flags)
- && test_bit(R5_UPTODATE, &sh->dev[failed_num].flags)
+ if (s.failed == 1 && !conf->mddev->ro &&
+ test_bit(R5_ReadError, &sh->dev[s.failed_num].flags)
+ && !test_bit(R5_LOCKED, &sh->dev[s.failed_num].flags)
+ && test_bit(R5_UPTODATE, &sh->dev[s.failed_num].flags)
) {
- dev = &sh->dev[failed_num];
+ dev = &sh->dev[s.failed_num];
if (!test_bit(R5_ReWrite, &dev->flags)) {
set_bit(R5_Wantwrite, &dev->flags);
set_bit(R5_ReWrite, &dev->flags);
set_bit(R5_LOCKED, &dev->flags);
- locked++;
+ s.locked++;
} else {
/* let's read it back */
set_bit(R5_Wantread, &dev->flags);
set_bit(R5_LOCKED, &dev->flags);
- locked++;
+ s.locked++;
}
}
- if (expanded && test_bit(STRIPE_EXPANDING, &sh->state)) {
- /* Need to write out all blocks after computing parity */
- sh->disks = conf->raid_disks;
- sh->pd_idx = stripe_to_pdidx(sh->sector, conf, conf->raid_disks);
- compute_parity5(sh, RECONSTRUCT_WRITE);
- for (i= conf->raid_disks; i--;) {
- set_bit(R5_LOCKED, &sh->dev[i].flags);
- locked++;
- set_bit(R5_Wantwrite, &sh->dev[i].flags);
+ /* Finish reconstruct operations initiated by the expansion process */
+ if (sh->reconstruct_state == reconstruct_state_result) {
+ struct stripe_head *sh2
+ = get_active_stripe(conf, sh->sector, 1, 1);
+ if (sh2 && test_bit(STRIPE_EXPAND_SOURCE, &sh2->state)) {
+ /* sh cannot be written until sh2 has been read.
+ * so arrange for sh to be delayed a little
+ */
+ set_bit(STRIPE_DELAYED, &sh->state);
+ set_bit(STRIPE_HANDLE, &sh->state);
+ if (!test_and_set_bit(STRIPE_PREREAD_ACTIVE,
+ &sh2->state))
+ atomic_inc(&conf->preread_active_stripes);
+ release_stripe(sh2);
+ goto unlock;
}
+ if (sh2)
+ release_stripe(sh2);
+
+ sh->reconstruct_state = reconstruct_state_idle;
clear_bit(STRIPE_EXPANDING, &sh->state);
- } else if (expanded) {
+ for (i = conf->raid_disks; i--; ) {
+ set_bit(R5_Wantwrite, &sh->dev[i].flags);
+ set_bit(R5_LOCKED, &sh->dev[i].flags);
+ s.locked++;
+ }
+ }
+
+ if (s.expanded && test_bit(STRIPE_EXPANDING, &sh->state) &&
+ !sh->reconstruct_state) {
+ /* Need to write out all blocks after computing parity */
+ sh->disks = conf->raid_disks;
+ stripe_set_idx(sh->sector, conf, 0, sh);
+ schedule_reconstruction5(sh, &s, 1, 1);
+ } else if (s.expanded && !sh->reconstruct_state && s.locked == 0) {
clear_bit(STRIPE_EXPAND_READY, &sh->state);
atomic_dec(&conf->reshape_stripes);
wake_up(&conf->wait_for_overlap);
md_done_sync(conf->mddev, STRIPE_SECTORS, 1);
}
- if (expanding && locked == 0) {
- /* We have read all the blocks in this stripe and now we need to
- * copy some of them into a target stripe for expand.
- */
- clear_bit(STRIPE_EXPAND_SOURCE, &sh->state);
- for (i=0; i< sh->disks; i++)
- if (i != sh->pd_idx) {
- int dd_idx, pd_idx, j;
- struct stripe_head *sh2;
-
- sector_t bn = compute_blocknr(sh, i);
- sector_t s = raid5_compute_sector(bn, conf->raid_disks,
- conf->raid_disks-1,
- &dd_idx, &pd_idx, conf);
- sh2 = get_active_stripe(conf, s, conf->raid_disks, pd_idx, 1);
- if (sh2 == NULL)
- /* so far only the early blocks of this stripe
- * have been requested. When later blocks
- * get requested, we will try again
- */
- continue;
- if(!test_bit(STRIPE_EXPANDING, &sh2->state) ||
- test_bit(R5_Expanded, &sh2->dev[dd_idx].flags)) {
- /* must have already done this block */
- release_stripe(sh2);
- continue;
- }
- memcpy(page_address(sh2->dev[dd_idx].page),
- page_address(sh->dev[i].page),
- STRIPE_SIZE);
- set_bit(R5_Expanded, &sh2->dev[dd_idx].flags);
- set_bit(R5_UPTODATE, &sh2->dev[dd_idx].flags);
- for (j=0; j<conf->raid_disks; j++)
- if (j != sh2->pd_idx &&
- !test_bit(R5_Expanded, &sh2->dev[j].flags))
- break;
- if (j == conf->raid_disks) {
- set_bit(STRIPE_EXPAND_READY, &sh2->state);
- set_bit(STRIPE_HANDLE, &sh2->state);
- }
- release_stripe(sh2);
- }
- }
+ if (s.expanding && s.locked == 0 &&
+ !test_bit(STRIPE_COMPUTE_RUN, &sh->state))
+ handle_stripe_expansion(conf, sh, NULL);
+ unlock:
spin_unlock(&sh->lock);
- while ((bi=return_bi)) {
- int bytes = bi->bi_size;
+ /* wait for this device to become unblocked */
+ if (unlikely(blocked_rdev))
+ md_wait_for_blocked_rdev(blocked_rdev, conf->mddev);
- return_bi = bi->bi_next;
- bi->bi_next = NULL;
- bi->bi_size = 0;
- bi->bi_end_io(bi, bytes, 0);
- }
- for (i=disks; i-- ;) {
- int rw;
- struct bio *bi;
- mdk_rdev_t *rdev;
- if (test_and_clear_bit(R5_Wantwrite, &sh->dev[i].flags))
- rw = 1;
- else if (test_and_clear_bit(R5_Wantread, &sh->dev[i].flags))
- rw = 0;
- else
- continue;
-
- bi = &sh->dev[i].req;
-
- bi->bi_rw = rw;
- if (rw)
- bi->bi_end_io = raid5_end_write_request;
- else
- bi->bi_end_io = raid5_end_read_request;
-
- rcu_read_lock();
- rdev = rcu_dereference(conf->disks[i].rdev);
- if (rdev && test_bit(Faulty, &rdev->flags))
- rdev = NULL;
- if (rdev)
- atomic_inc(&rdev->nr_pending);
- rcu_read_unlock();
-
- if (rdev) {
- if (syncing || expanding || expanded)
- md_sync_acct(rdev->bdev, STRIPE_SECTORS);
+ if (s.ops_request)
+ raid5_run_ops(sh, s.ops_request);
- bi->bi_bdev = rdev->bdev;
- PRINTK("for %llu schedule op %ld on disc %d\n",
- (unsigned long long)sh->sector, bi->bi_rw, i);
- atomic_inc(&sh->count);
- bi->bi_sector = sh->sector + rdev->data_offset;
- bi->bi_flags = 1 << BIO_UPTODATE;
- bi->bi_vcnt = 1;
- bi->bi_max_vecs = 1;
- bi->bi_idx = 0;
- bi->bi_io_vec = &sh->dev[i].vec;
- bi->bi_io_vec[0].bv_len = STRIPE_SIZE;
- bi->bi_io_vec[0].bv_offset = 0;
- bi->bi_size = STRIPE_SIZE;
- bi->bi_next = NULL;
- if (rw == WRITE &&
- test_bit(R5_ReWrite, &sh->dev[i].flags))
- atomic_add(STRIPE_SECTORS, &rdev->corrected_errors);
- generic_make_request(bi);
- } else {
- if (rw == 1)
- set_bit(STRIPE_DEGRADED, &sh->state);
- PRINTK("skip op %ld on disc %d for sector %llu\n",
- bi->bi_rw, i, (unsigned long long)sh->sector);
- clear_bit(R5_LOCKED, &sh->dev[i].flags);
- set_bit(STRIPE_HANDLE, &sh->state);
- }
- }
+ ops_run_io(sh, &s);
+
+ return_io(return_bi);
+
+ return blocked_rdev == NULL;
}
-static void handle_stripe6(struct stripe_head *sh, struct page *tmp_page)
+static bool handle_stripe6(struct stripe_head *sh, struct page *tmp_page)
{
- raid6_conf_t *conf = sh->raid_conf;
- int disks = conf->raid_disks;
- struct bio *return_bi= NULL;
- struct bio *bi;
- int i;
- int syncing;
- int locked=0, uptodate=0, to_read=0, to_write=0, failed=0, written=0;
- int non_overwrite = 0;
- int failed_num[2] = {0, 0};
+ raid5_conf_t *conf = sh->raid_conf;
+ int disks = sh->disks;
+ struct bio *return_bi = NULL;
+ int i, pd_idx = sh->pd_idx, qd_idx = sh->qd_idx;
+ struct stripe_head_state s;
+ struct r6_state r6s;
struct r5dev *dev, *pdev, *qdev;
- int pd_idx = sh->pd_idx;
- int qd_idx = raid6_next_disk(pd_idx, disks);
- int p_failed, q_failed;
+ mdk_rdev_t *blocked_rdev = NULL;
- PRINTK("handling stripe %llu, state=%#lx cnt=%d, pd_idx=%d, qd_idx=%d\n",
- (unsigned long long)sh->sector, sh->state, atomic_read(&sh->count),
- pd_idx, qd_idx);
+ pr_debug("handling stripe %llu, state=%#lx cnt=%d, "
+ "pd_idx=%d, qd_idx=%d\n",
+ (unsigned long long)sh->sector, sh->state,
+ atomic_read(&sh->count), pd_idx, qd_idx);
+ memset(&s, 0, sizeof(s));
spin_lock(&sh->lock);
clear_bit(STRIPE_HANDLE, &sh->state);
clear_bit(STRIPE_DELAYED, &sh->state);
- syncing = test_bit(STRIPE_SYNCING, &sh->state);
+ s.syncing = test_bit(STRIPE_SYNCING, &sh->state);
+ s.expanding = test_bit(STRIPE_EXPAND_SOURCE, &sh->state);
+ s.expanded = test_bit(STRIPE_EXPAND_READY, &sh->state);
/* Now to look around and see what can be done */
rcu_read_lock();
dev = &sh->dev[i];
clear_bit(R5_Insync, &dev->flags);
- PRINTK("check %d: state 0x%lx read %p write %p written %p\n",
+ pr_debug("check %d: state 0x%lx read %p write %p written %p\n",
i, dev->flags, dev->toread, dev->towrite, dev->written);
/* maybe we can reply to a read */
if (test_bit(R5_UPTODATE, &dev->flags) && dev->toread) {
struct bio *rbi, *rbi2;
- PRINTK("Return read for disc %d\n", i);
+ pr_debug("Return read for disc %d\n", i);
spin_lock_irq(&conf->device_lock);
rbi = dev->toread;
dev->toread = NULL;
copy_data(0, rbi, dev->page, dev->sector);
rbi2 = r5_next_bio(rbi, dev->sector);
spin_lock_irq(&conf->device_lock);
- if (--rbi->bi_phys_segments == 0) {
+ if (!raid5_dec_bi_phys_segments(rbi)) {
rbi->bi_next = return_bi;
return_bi = rbi;
}
}
/* now count some things */
- if (test_bit(R5_LOCKED, &dev->flags)) locked++;
- if (test_bit(R5_UPTODATE, &dev->flags)) uptodate++;
+ if (test_bit(R5_LOCKED, &dev->flags)) s.locked++;
+ if (test_bit(R5_UPTODATE, &dev->flags)) s.uptodate++;
- if (dev->toread) to_read++;
+ if (dev->toread)
+ s.to_read++;
if (dev->towrite) {
- to_write++;
+ s.to_write++;
if (!test_bit(R5_OVERWRITE, &dev->flags))
- non_overwrite++;
+ s.non_overwrite++;
}
- if (dev->written) written++;
+ if (dev->written)
+ s.written++;
rdev = rcu_dereference(conf->disks[i].rdev);
+ if (blocked_rdev == NULL &&
+ rdev && unlikely(test_bit(Blocked, &rdev->flags))) {
+ blocked_rdev = rdev;
+ atomic_inc(&rdev->nr_pending);
+ }
if (!rdev || !test_bit(In_sync, &rdev->flags)) {
/* The ReadError flag will just be confusing now */
clear_bit(R5_ReadError, &dev->flags);
}
if (!rdev || !test_bit(In_sync, &rdev->flags)
|| test_bit(R5_ReadError, &dev->flags)) {
- if ( failed < 2 )
- failed_num[failed] = i;
- failed++;
+ if (s.failed < 2)
+ r6s.failed_num[s.failed] = i;
+ s.failed++;
} else
set_bit(R5_Insync, &dev->flags);
}
rcu_read_unlock();
- PRINTK("locked=%d uptodate=%d to_read=%d"
- " to_write=%d failed=%d failed_num=%d,%d\n",
- locked, uptodate, to_read, to_write, failed,
- failed_num[0], failed_num[1]);
- /* check if the array has lost >2 devices and, if so, some requests might
- * need to be failed
- */
- if (failed > 2 && to_read+to_write+written) {
- for (i=disks; i--; ) {
- int bitmap_end = 0;
-
- if (test_bit(R5_ReadError, &sh->dev[i].flags)) {
- mdk_rdev_t *rdev;
- rcu_read_lock();
- rdev = rcu_dereference(conf->disks[i].rdev);
- if (rdev && test_bit(In_sync, &rdev->flags))
- /* multiple read failures in one stripe */
- md_error(conf->mddev, rdev);
- rcu_read_unlock();
- }
- spin_lock_irq(&conf->device_lock);
- /* fail all writes first */
- bi = sh->dev[i].towrite;
- sh->dev[i].towrite = NULL;
- if (bi) { to_write--; bitmap_end = 1; }
-
- if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags))
- wake_up(&conf->wait_for_overlap);
-
- while (bi && bi->bi_sector < sh->dev[i].sector + STRIPE_SECTORS){
- struct bio *nextbi = r5_next_bio(bi, sh->dev[i].sector);
- clear_bit(BIO_UPTODATE, &bi->bi_flags);
- if (--bi->bi_phys_segments == 0) {
- md_write_end(conf->mddev);
- bi->bi_next = return_bi;
- return_bi = bi;
- }
- bi = nextbi;
- }
- /* and fail all 'written' */
- bi = sh->dev[i].written;
- sh->dev[i].written = NULL;
- if (bi) bitmap_end = 1;
- while (bi && bi->bi_sector < sh->dev[i].sector + STRIPE_SECTORS) {
- struct bio *bi2 = r5_next_bio(bi, sh->dev[i].sector);
- clear_bit(BIO_UPTODATE, &bi->bi_flags);
- if (--bi->bi_phys_segments == 0) {
- md_write_end(conf->mddev);
- bi->bi_next = return_bi;
- return_bi = bi;
- }
- bi = bi2;
- }
-
- /* fail any reads if this device is non-operational */
- if (!test_bit(R5_Insync, &sh->dev[i].flags) ||
- test_bit(R5_ReadError, &sh->dev[i].flags)) {
- bi = sh->dev[i].toread;
- sh->dev[i].toread = NULL;
- if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags))
- wake_up(&conf->wait_for_overlap);
- if (bi) to_read--;
- while (bi && bi->bi_sector < sh->dev[i].sector + STRIPE_SECTORS){
- struct bio *nextbi = r5_next_bio(bi, sh->dev[i].sector);
- clear_bit(BIO_UPTODATE, &bi->bi_flags);
- if (--bi->bi_phys_segments == 0) {
- bi->bi_next = return_bi;
- return_bi = bi;
- }
- bi = nextbi;
- }
- }
- spin_unlock_irq(&conf->device_lock);
- if (bitmap_end)
- bitmap_endwrite(conf->mddev->bitmap, sh->sector,
- STRIPE_SECTORS, 0, 0);
+ if (unlikely(blocked_rdev)) {
+ if (s.syncing || s.expanding || s.expanded ||
+ s.to_write || s.written) {
+ set_bit(STRIPE_HANDLE, &sh->state);
+ goto unlock;
}
+ /* There is nothing for the blocked_rdev to block */
+ rdev_dec_pending(blocked_rdev, conf->mddev);
+ blocked_rdev = NULL;
}
- if (failed > 2 && syncing) {
+
+ pr_debug("locked=%d uptodate=%d to_read=%d"
+ " to_write=%d failed=%d failed_num=%d,%d\n",
+ s.locked, s.uptodate, s.to_read, s.to_write, s.failed,
+ r6s.failed_num[0], r6s.failed_num[1]);
+ /* check if the array has lost >2 devices and, if so, some requests
+ * might need to be failed
+ */
+ if (s.failed > 2 && s.to_read+s.to_write+s.written)
+ handle_failed_stripe(conf, sh, &s, disks, &return_bi);
+ if (s.failed > 2 && s.syncing) {
md_done_sync(conf->mddev, STRIPE_SECTORS,0);
clear_bit(STRIPE_SYNCING, &sh->state);
- syncing = 0;
+ s.syncing = 0;
}
/*
* are safe, or on a failed drive
*/
pdev = &sh->dev[pd_idx];
- p_failed = (failed >= 1 && failed_num[0] == pd_idx)
- || (failed >= 2 && failed_num[1] == pd_idx);
+ r6s.p_failed = (s.failed >= 1 && r6s.failed_num[0] == pd_idx)
+ || (s.failed >= 2 && r6s.failed_num[1] == pd_idx);
qdev = &sh->dev[qd_idx];
- q_failed = (failed >= 1 && failed_num[0] == qd_idx)
- || (failed >= 2 && failed_num[1] == qd_idx);
+ r6s.q_failed = (s.failed >= 1 && r6s.failed_num[0] == qd_idx)
+ || (s.failed >= 2 && r6s.failed_num[1] == qd_idx);
- if ( written &&
- ( p_failed || ((test_bit(R5_Insync, &pdev->flags)
+ if ( s.written &&
+ ( r6s.p_failed || ((test_bit(R5_Insync, &pdev->flags)
&& !test_bit(R5_LOCKED, &pdev->flags)
- && test_bit(R5_UPTODATE, &pdev->flags))) ) &&
- ( q_failed || ((test_bit(R5_Insync, &qdev->flags)
+ && test_bit(R5_UPTODATE, &pdev->flags)))) &&
+ ( r6s.q_failed || ((test_bit(R5_Insync, &qdev->flags)
&& !test_bit(R5_LOCKED, &qdev->flags)
- && test_bit(R5_UPTODATE, &qdev->flags))) ) ) {
- /* any written block on an uptodate or failed drive can be
- * returned. Note that if we 'wrote' to a failed drive,
- * it will be UPTODATE, but never LOCKED, so we don't need
- * to test 'failed' directly.
- */
- for (i=disks; i--; )
- if (sh->dev[i].written) {
- dev = &sh->dev[i];
- if (!test_bit(R5_LOCKED, &dev->flags) &&
- test_bit(R5_UPTODATE, &dev->flags) ) {
- /* We can return any write requests */
- int bitmap_end = 0;
- struct bio *wbi, *wbi2;
- PRINTK("Return write for stripe %llu disc %d\n",
- (unsigned long long)sh->sector, i);
- spin_lock_irq(&conf->device_lock);
- wbi = dev->written;
- dev->written = NULL;
- while (wbi && wbi->bi_sector < dev->sector + STRIPE_SECTORS) {
- wbi2 = r5_next_bio(wbi, dev->sector);
- if (--wbi->bi_phys_segments == 0) {
- md_write_end(conf->mddev);
- wbi->bi_next = return_bi;
- return_bi = wbi;
- }
- wbi = wbi2;
- }
- if (dev->towrite == NULL)
- bitmap_end = 1;
- spin_unlock_irq(&conf->device_lock);
- if (bitmap_end)
- bitmap_endwrite(conf->mddev->bitmap, sh->sector,
- STRIPE_SECTORS,
- !test_bit(STRIPE_DEGRADED, &sh->state), 0);
- }
- }
- }
-
- /* Now we might consider reading some blocks, either to check/generate
- * parity, or to satisfy requests
- * or to load a block that is being partially written.
- */
- if (to_read || non_overwrite || (to_write && failed) || (syncing && (uptodate < disks))) {
- for (i=disks; i--;) {
- dev = &sh->dev[i];
- if (!test_bit(R5_LOCKED, &dev->flags) && !test_bit(R5_UPTODATE, &dev->flags) &&
- (dev->toread ||
- (dev->towrite && !test_bit(R5_OVERWRITE, &dev->flags)) ||
- syncing ||
- (failed >= 1 && (sh->dev[failed_num[0]].toread || to_write)) ||
- (failed >= 2 && (sh->dev[failed_num[1]].toread || to_write))
- )
- ) {
- /* we would like to get this block, possibly
- * by computing it, but we might not be able to
- */
- if (uptodate == disks-1) {
- PRINTK("Computing stripe %llu block %d\n",
- (unsigned long long)sh->sector, i);
- compute_block_1(sh, i, 0);
- uptodate++;
- } else if ( uptodate == disks-2 && failed >= 2 ) {
- /* Computing 2-failure is *very* expensive; only do it if failed >= 2 */
- int other;
- for (other=disks; other--;) {
- if ( other == i )
- continue;
- if ( !test_bit(R5_UPTODATE, &sh->dev[other].flags) )
- break;
- }
- BUG_ON(other < 0);
- PRINTK("Computing stripe %llu blocks %d,%d\n",
- (unsigned long long)sh->sector, i, other);
- compute_block_2(sh, i, other);
- uptodate += 2;
- } else if (test_bit(R5_Insync, &dev->flags)) {
- set_bit(R5_LOCKED, &dev->flags);
- set_bit(R5_Wantread, &dev->flags);
-#if 0
- /* if I am just reading this block and we don't have
- a failed drive, or any pending writes then sidestep the cache */
- if (sh->bh_read[i] && !sh->bh_read[i]->b_reqnext &&
- ! syncing && !failed && !to_write) {
- sh->bh_cache[i]->b_page = sh->bh_read[i]->b_page;
- sh->bh_cache[i]->b_data = sh->bh_read[i]->b_data;
- }
-#endif
- locked++;
- PRINTK("Reading block %d (sync=%d)\n",
- i, syncing);
- }
- }
- }
- set_bit(STRIPE_HANDLE, &sh->state);
- }
-
- /* now to consider writing and what else, if anything should be read */
- if (to_write) {
- int rcw=0, must_compute=0;
- for (i=disks ; i--;) {
- dev = &sh->dev[i];
- /* Would I have to read this buffer for reconstruct_write */
- if (!test_bit(R5_OVERWRITE, &dev->flags)
- && i != pd_idx && i != qd_idx
- && (!test_bit(R5_LOCKED, &dev->flags)
-#if 0
- || sh->bh_page[i] != bh->b_page
-#endif
- ) &&
- !test_bit(R5_UPTODATE, &dev->flags)) {
- if (test_bit(R5_Insync, &dev->flags)) rcw++;
- else {
- PRINTK("raid6: must_compute: disk %d flags=%#lx\n", i, dev->flags);
- must_compute++;
- }
- }
- }
- PRINTK("for sector %llu, rcw=%d, must_compute=%d\n",
- (unsigned long long)sh->sector, rcw, must_compute);
- set_bit(STRIPE_HANDLE, &sh->state);
-
- if (rcw > 0)
- /* want reconstruct write, but need to get some data */
- for (i=disks; i--;) {
- dev = &sh->dev[i];
- if (!test_bit(R5_OVERWRITE, &dev->flags)
- && !(failed == 0 && (i == pd_idx || i == qd_idx))
- && !test_bit(R5_LOCKED, &dev->flags) && !test_bit(R5_UPTODATE, &dev->flags) &&
- test_bit(R5_Insync, &dev->flags)) {
- if (test_bit(STRIPE_PREREAD_ACTIVE, &sh->state))
- {
- PRINTK("Read_old stripe %llu block %d for Reconstruct\n",
- (unsigned long long)sh->sector, i);
- set_bit(R5_LOCKED, &dev->flags);
- set_bit(R5_Wantread, &dev->flags);
- locked++;
- } else {
- PRINTK("Request delayed stripe %llu block %d for Reconstruct\n",
- (unsigned long long)sh->sector, i);
- set_bit(STRIPE_DELAYED, &sh->state);
- set_bit(STRIPE_HANDLE, &sh->state);
- }
- }
- }
- /* now if nothing is locked, and if we have enough data, we can start a write request */
- if (locked == 0 && rcw == 0 &&
- !test_bit(STRIPE_BIT_DELAY, &sh->state)) {
- if ( must_compute > 0 ) {
- /* We have failed blocks and need to compute them */
- switch ( failed ) {
- case 0: BUG();
- case 1: compute_block_1(sh, failed_num[0], 0); break;
- case 2: compute_block_2(sh, failed_num[0], failed_num[1]); break;
- default: BUG(); /* This request should have been failed? */
- }
- }
-
- PRINTK("Computing parity for stripe %llu\n", (unsigned long long)sh->sector);
- compute_parity6(sh, RECONSTRUCT_WRITE);
- /* now every locked buffer is ready to be written */
- for (i=disks; i--;)
- if (test_bit(R5_LOCKED, &sh->dev[i].flags)) {
- PRINTK("Writing stripe %llu block %d\n",
- (unsigned long long)sh->sector, i);
- locked++;
- set_bit(R5_Wantwrite, &sh->dev[i].flags);
- }
- /* after a RECONSTRUCT_WRITE, the stripe MUST be in-sync */
- set_bit(STRIPE_INSYNC, &sh->state);
-
- if (test_and_clear_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) {
- atomic_dec(&conf->preread_active_stripes);
- if (atomic_read(&conf->preread_active_stripes) < IO_THRESHOLD)
- md_wakeup_thread(conf->mddev->thread);
- }
- }
- }
-
- /* maybe we need to check and possibly fix the parity for this stripe
- * Any reads will already have been scheduled, so we just see if enough data
- * is available
- */
- if (syncing && locked == 0 && !test_bit(STRIPE_INSYNC, &sh->state)) {
- int update_p = 0, update_q = 0;
- struct r5dev *dev;
-
- set_bit(STRIPE_HANDLE, &sh->state);
-
- BUG_ON(failed>2);
- BUG_ON(uptodate < disks);
- /* Want to check and possibly repair P and Q.
- * However there could be one 'failed' device, in which
- * case we can only check one of them, possibly using the
- * other to generate missing data
- */
-
- /* If !tmp_page, we cannot do the calculations,
- * but as we have set STRIPE_HANDLE, we will soon be called
- * by stripe_handle with a tmp_page - just wait until then.
- */
- if (tmp_page) {
- if (failed == q_failed) {
- /* The only possible failed device holds 'Q', so it makes
- * sense to check P (If anything else were failed, we would
- * have used P to recreate it).
- */
- compute_block_1(sh, pd_idx, 1);
- if (!page_is_zero(sh->dev[pd_idx].page)) {
- compute_block_1(sh,pd_idx,0);
- update_p = 1;
- }
- }
- if (!q_failed && failed < 2) {
- /* q is not failed, and we didn't use it to generate
- * anything, so it makes sense to check it
- */
- memcpy(page_address(tmp_page),
- page_address(sh->dev[qd_idx].page),
- STRIPE_SIZE);
- compute_parity6(sh, UPDATE_PARITY);
- if (memcmp(page_address(tmp_page),
- page_address(sh->dev[qd_idx].page),
- STRIPE_SIZE)!= 0) {
- clear_bit(STRIPE_INSYNC, &sh->state);
- update_q = 1;
- }
- }
- if (update_p || update_q) {
- conf->mddev->resync_mismatches += STRIPE_SECTORS;
- if (test_bit(MD_RECOVERY_CHECK, &conf->mddev->recovery))
- /* don't try to repair!! */
- update_p = update_q = 0;
- }
-
- /* now write out any block on a failed drive,
- * or P or Q if they need it
- */
-
- if (failed == 2) {
- dev = &sh->dev[failed_num[1]];
- locked++;
- set_bit(R5_LOCKED, &dev->flags);
- set_bit(R5_Wantwrite, &dev->flags);
- }
- if (failed >= 1) {
- dev = &sh->dev[failed_num[0]];
- locked++;
- set_bit(R5_LOCKED, &dev->flags);
- set_bit(R5_Wantwrite, &dev->flags);
- }
+ && test_bit(R5_UPTODATE, &qdev->flags)))))
+ handle_stripe_clean_event(conf, sh, disks, &return_bi);
- if (update_p) {
- dev = &sh->dev[pd_idx];
- locked ++;
- set_bit(R5_LOCKED, &dev->flags);
- set_bit(R5_Wantwrite, &dev->flags);
- }
- if (update_q) {
- dev = &sh->dev[qd_idx];
- locked++;
- set_bit(R5_LOCKED, &dev->flags);
- set_bit(R5_Wantwrite, &dev->flags);
- }
- clear_bit(STRIPE_DEGRADED, &sh->state);
+ /* Now we might consider reading some blocks, either to check/generate
+ * parity, or to satisfy requests
+ * or to load a block that is being partially written.
+ */
+ if (s.to_read || s.non_overwrite || (s.to_write && s.failed) ||
+ (s.syncing && (s.uptodate < disks)) || s.expanding)
+ handle_stripe_fill6(sh, &s, &r6s, disks);
- set_bit(STRIPE_INSYNC, &sh->state);
- }
- }
+ /* now to consider writing and what else, if anything should be read */
+ if (s.to_write)
+ handle_stripe_dirtying6(conf, sh, &s, &r6s, disks);
+
+ /* maybe we need to check and possibly fix the parity for this stripe
+ * Any reads will already have been scheduled, so we just see if enough
+ * data is available
+ */
+ if (s.syncing && s.locked == 0 && !test_bit(STRIPE_INSYNC, &sh->state))
+ handle_parity_checks6(conf, sh, &s, &r6s, tmp_page, disks);
- if (syncing && locked == 0 && test_bit(STRIPE_INSYNC, &sh->state)) {
+ if (s.syncing && s.locked == 0 && test_bit(STRIPE_INSYNC, &sh->state)) {
md_done_sync(conf->mddev, STRIPE_SECTORS,1);
clear_bit(STRIPE_SYNCING, &sh->state);
}
/* If the failed drives are just a ReadError, then we might need
* to progress the repair/check process
*/
- if (failed <= 2 && ! conf->mddev->ro)
- for (i=0; i<failed;i++) {
- dev = &sh->dev[failed_num[i]];
+ if (s.failed <= 2 && !conf->mddev->ro)
+ for (i = 0; i < s.failed; i++) {
+ dev = &sh->dev[r6s.failed_num[i]];
if (test_bit(R5_ReadError, &dev->flags)
&& !test_bit(R5_LOCKED, &dev->flags)
&& test_bit(R5_UPTODATE, &dev->flags)
}
}
}
- spin_unlock(&sh->lock);
- while ((bi=return_bi)) {
- int bytes = bi->bi_size;
+ if (s.expanded && test_bit(STRIPE_EXPANDING, &sh->state)) {
+ struct stripe_head *sh2
+ = get_active_stripe(conf, sh->sector, 1, 1);
+ if (sh2 && test_bit(STRIPE_EXPAND_SOURCE, &sh2->state)) {
+ /* sh cannot be written until sh2 has been read.
+ * so arrange for sh to be delayed a little
+ */
+ set_bit(STRIPE_DELAYED, &sh->state);
+ set_bit(STRIPE_HANDLE, &sh->state);
+ if (!test_and_set_bit(STRIPE_PREREAD_ACTIVE,
+ &sh2->state))
+ atomic_inc(&conf->preread_active_stripes);
+ release_stripe(sh2);
+ goto unlock;
+ }
+ if (sh2)
+ release_stripe(sh2);
- return_bi = bi->bi_next;
- bi->bi_next = NULL;
- bi->bi_size = 0;
- bi->bi_end_io(bi, bytes, 0);
+ /* Need to write out all blocks after computing P&Q */
+ sh->disks = conf->raid_disks;
+ stripe_set_idx(sh->sector, conf, 0, sh);
+ compute_parity6(sh, RECONSTRUCT_WRITE);
+ for (i = conf->raid_disks ; i-- ; ) {
+ set_bit(R5_LOCKED, &sh->dev[i].flags);
+ s.locked++;
+ set_bit(R5_Wantwrite, &sh->dev[i].flags);
+ }
+ clear_bit(STRIPE_EXPANDING, &sh->state);
+ } else if (s.expanded) {
+ clear_bit(STRIPE_EXPAND_READY, &sh->state);
+ atomic_dec(&conf->reshape_stripes);
+ wake_up(&conf->wait_for_overlap);
+ md_done_sync(conf->mddev, STRIPE_SECTORS, 1);
}
- for (i=disks; i-- ;) {
- int rw;
- struct bio *bi;
- mdk_rdev_t *rdev;
- if (test_and_clear_bit(R5_Wantwrite, &sh->dev[i].flags))
- rw = 1;
- else if (test_and_clear_bit(R5_Wantread, &sh->dev[i].flags))
- rw = 0;
- else
- continue;
- bi = &sh->dev[i].req;
+ if (s.expanding && s.locked == 0 &&
+ !test_bit(STRIPE_COMPUTE_RUN, &sh->state))
+ handle_stripe_expansion(conf, sh, &r6s);
- bi->bi_rw = rw;
- if (rw)
- bi->bi_end_io = raid5_end_write_request;
- else
- bi->bi_end_io = raid5_end_read_request;
+ unlock:
+ spin_unlock(&sh->lock);
- rcu_read_lock();
- rdev = rcu_dereference(conf->disks[i].rdev);
- if (rdev && test_bit(Faulty, &rdev->flags))
- rdev = NULL;
- if (rdev)
- atomic_inc(&rdev->nr_pending);
- rcu_read_unlock();
+ /* wait for this device to become unblocked */
+ if (unlikely(blocked_rdev))
+ md_wait_for_blocked_rdev(blocked_rdev, conf->mddev);
- if (rdev) {
- if (syncing)
- md_sync_acct(rdev->bdev, STRIPE_SECTORS);
+ ops_run_io(sh, &s);
- bi->bi_bdev = rdev->bdev;
- PRINTK("for %llu schedule op %ld on disc %d\n",
- (unsigned long long)sh->sector, bi->bi_rw, i);
- atomic_inc(&sh->count);
- bi->bi_sector = sh->sector + rdev->data_offset;
- bi->bi_flags = 1 << BIO_UPTODATE;
- bi->bi_vcnt = 1;
- bi->bi_max_vecs = 1;
- bi->bi_idx = 0;
- bi->bi_io_vec = &sh->dev[i].vec;
- bi->bi_io_vec[0].bv_len = STRIPE_SIZE;
- bi->bi_io_vec[0].bv_offset = 0;
- bi->bi_size = STRIPE_SIZE;
- bi->bi_next = NULL;
- if (rw == WRITE &&
- test_bit(R5_ReWrite, &sh->dev[i].flags))
- atomic_add(STRIPE_SECTORS, &rdev->corrected_errors);
- generic_make_request(bi);
- } else {
- if (rw == 1)
- set_bit(STRIPE_DEGRADED, &sh->state);
- PRINTK("skip op %ld on disc %d for sector %llu\n",
- bi->bi_rw, i, (unsigned long long)sh->sector);
- clear_bit(R5_LOCKED, &sh->dev[i].flags);
- set_bit(STRIPE_HANDLE, &sh->state);
- }
- }
+ return_io(return_bi);
+
+ return blocked_rdev == NULL;
}
-static void handle_stripe(struct stripe_head *sh, struct page *tmp_page)
+/* returns true if the stripe was handled */
+static bool handle_stripe(struct stripe_head *sh, struct page *tmp_page)
{
if (sh->raid_conf->level == 6)
- handle_stripe6(sh, tmp_page);
+ return handle_stripe6(sh, tmp_page);
else
- handle_stripe5(sh);
+ return handle_stripe5(sh);
}
clear_bit(STRIPE_DELAYED, &sh->state);
if (!test_and_set_bit(STRIPE_PREREAD_ACTIVE, &sh->state))
atomic_inc(&conf->preread_active_stripes);
- list_add_tail(&sh->lru, &conf->handle_list);
+ list_add_tail(&sh->lru, &conf->hold_list);
}
- }
+ } else
+ blk_plug_device(conf->mddev->queue);
}
static void activate_bit_delay(raid5_conf_t *conf)
for (i=0; i<mddev->raid_disks; i++) {
mdk_rdev_t *rdev = rcu_dereference(conf->disks[i].rdev);
if (rdev && !test_bit(Faulty, &rdev->flags) && atomic_read(&rdev->nr_pending)) {
- request_queue_t *r_queue = bdev_get_queue(rdev->bdev);
+ struct request_queue *r_queue = bdev_get_queue(rdev->bdev);
atomic_inc(&rdev->nr_pending);
rcu_read_unlock();
- if (r_queue->unplug_fn)
- r_queue->unplug_fn(r_queue);
+ blk_unplug(r_queue);
rdev_dec_pending(rdev, mddev);
rcu_read_lock();
rcu_read_unlock();
}
-static void raid5_unplug_device(request_queue_t *q)
+static void raid5_unplug_device(struct request_queue *q)
{
mddev_t *mddev = q->queuedata;
raid5_conf_t *conf = mddev_to_conf(mddev);
unplug_slaves(mddev);
}
-static int raid5_issue_flush(request_queue_t *q, struct gendisk *disk,
- sector_t *error_sector)
-{
- mddev_t *mddev = q->queuedata;
- raid5_conf_t *conf = mddev_to_conf(mddev);
- int i, ret = 0;
-
- rcu_read_lock();
- for (i=0; i<mddev->raid_disks && ret == 0; i++) {
- mdk_rdev_t *rdev = rcu_dereference(conf->disks[i].rdev);
- if (rdev && !test_bit(Faulty, &rdev->flags)) {
- struct block_device *bdev = rdev->bdev;
- request_queue_t *r_queue = bdev_get_queue(bdev);
-
- if (!r_queue->issue_flush_fn)
- ret = -EOPNOTSUPP;
- else {
- atomic_inc(&rdev->nr_pending);
- rcu_read_unlock();
- ret = r_queue->issue_flush_fn(r_queue, bdev->bd_disk,
- error_sector);
- rdev_dec_pending(rdev, mddev);
- rcu_read_lock();
- }
- }
- }
- rcu_read_unlock();
- return ret;
-}
-
static int raid5_congested(void *data, int bits)
{
mddev_t *mddev = data;
/* We want read requests to align with chunks where possible,
* but write requests don't need to.
*/
-static int raid5_mergeable_bvec(request_queue_t *q, struct bio *bio, struct bio_vec *biovec)
+static int raid5_mergeable_bvec(struct request_queue *q,
+ struct bvec_merge_data *bvm,
+ struct bio_vec *biovec)
{
mddev_t *mddev = q->queuedata;
- sector_t sector = bio->bi_sector + get_start_sect(bio->bi_bdev);
+ sector_t sector = bvm->bi_sector + get_start_sect(bvm->bi_bdev);
int max;
unsigned int chunk_sectors = mddev->chunk_size >> 9;
- unsigned int bio_sectors = bio->bi_size >> 9;
+ unsigned int bio_sectors = bvm->bi_size >> 9;
- if (bio_data_dir(bio))
+ if ((bvm->bi_rw & 1) == WRITE)
return biovec->bv_len; /* always allow writes to be mergeable */
+ if (mddev->new_chunk < mddev->chunk_size)
+ chunk_sectors = mddev->new_chunk >> 9;
max = (chunk_sectors - ((sector & (chunk_sectors - 1)) + bio_sectors)) << 9;
if (max < 0) max = 0;
if (max <= biovec->bv_len && bio_sectors == 0)
unsigned int chunk_sectors = mddev->chunk_size >> 9;
unsigned int bio_sectors = bio->bi_size >> 9;
+ if (mddev->new_chunk < mddev->chunk_size)
+ chunk_sectors = mddev->new_chunk >> 9;
return chunk_sectors >=
((sector & (chunk_sectors - 1)) + bio_sectors);
}
}
bi = conf->retry_read_aligned_list;
if(bi) {
- conf->retry_read_aligned = bi->bi_next;
+ conf->retry_read_aligned_list = bi->bi_next;
bi->bi_next = NULL;
+ /*
+ * this sets the active strip count to 1 and the processed
+ * strip count to zero (upper 8 bits)
+ */
bi->bi_phys_segments = 1; /* biased count of active stripes */
- bi->bi_hw_segments = 0; /* count of processed stripes */
}
return bi;
* first).
* If the read failed..
*/
-static int raid5_align_endio(struct bio *bi, unsigned int bytes, int error)
+static void raid5_align_endio(struct bio *bi, int error)
{
struct bio* raid_bi = bi->bi_private;
mddev_t *mddev;
int uptodate = test_bit(BIO_UPTODATE, &bi->bi_flags);
mdk_rdev_t *rdev;
- if (bi->bi_size)
- return 1;
bio_put(bi);
mddev = raid_bi->bi_bdev->bd_disk->queue->queuedata;
rdev_dec_pending(rdev, conf->mddev);
if (!error && uptodate) {
- bio_endio(raid_bi, bytes, 0);
+ bio_endio(raid_bi, 0);
if (atomic_dec_and_test(&conf->active_aligned_reads))
wake_up(&conf->wait_for_stripe);
- return 0;
+ return;
}
- PRINTK("raid5_align_endio : io error...handing IO for a retry\n");
+ pr_debug("raid5_align_endio : io error...handing IO for a retry\n");
add_bio_to_retry(raid_bi, conf);
- return 0;
}
-static int chunk_aligned_read(request_queue_t *q, struct bio * raid_bio)
+static int bio_fits_rdev(struct bio *bi)
+{
+ struct request_queue *q = bdev_get_queue(bi->bi_bdev);
+
+ if ((bi->bi_size>>9) > q->max_sectors)
+ return 0;
+ blk_recount_segments(q, bi);
+ if (bi->bi_phys_segments > q->max_phys_segments)
+ return 0;
+
+ if (q->merge_bvec_fn)
+ /* it's too hard to apply the merge_bvec_fn at this stage,
+ * just just give up
+ */
+ return 0;
+
+ return 1;
+}
+
+
+static int chunk_aligned_read(struct request_queue *q, struct bio * raid_bio)
{
mddev_t *mddev = q->queuedata;
raid5_conf_t *conf = mddev_to_conf(mddev);
- const unsigned int raid_disks = conf->raid_disks;
- const unsigned int data_disks = raid_disks - conf->max_degraded;
- unsigned int dd_idx, pd_idx;
+ unsigned int dd_idx;
struct bio* align_bi;
mdk_rdev_t *rdev;
if (!in_chunk_boundary(mddev, raid_bio)) {
- printk("chunk_aligned_read : non aligned\n");
+ pr_debug("chunk_aligned_read : non aligned\n");
return 0;
}
/*
- * use bio_clone to make a copy of the bio
+ * use bio_clone to make a copy of the bio
*/
align_bi = bio_clone(raid_bio, GFP_NOIO);
if (!align_bi)
/*
* compute position
*/
- align_bi->bi_sector = raid5_compute_sector(raid_bio->bi_sector,
- raid_disks,
- data_disks,
- &dd_idx,
- &pd_idx,
- conf);
+ align_bi->bi_sector = raid5_compute_sector(conf, raid_bio->bi_sector,
+ 0,
+ &dd_idx, NULL);
rcu_read_lock();
rdev = rcu_dereference(conf->disks[dd_idx].rdev);
align_bi->bi_flags &= ~(1 << BIO_SEG_VALID);
align_bi->bi_sector += rdev->data_offset;
+ if (!bio_fits_rdev(align_bi)) {
+ /* too big in some way */
+ bio_put(align_bi);
+ rdev_dec_pending(rdev, mddev);
+ return 0;
+ }
+
spin_lock_irq(&conf->device_lock);
wait_event_lock_irq(conf->wait_for_stripe,
conf->quiesce == 0,
}
}
+/* __get_priority_stripe - get the next stripe to process
+ *
+ * Full stripe writes are allowed to pass preread active stripes up until
+ * the bypass_threshold is exceeded. In general the bypass_count
+ * increments when the handle_list is handled before the hold_list; however, it
+ * will not be incremented when STRIPE_IO_STARTED is sampled set signifying a
+ * stripe with in flight i/o. The bypass_count will be reset when the
+ * head of the hold_list has changed, i.e. the head was promoted to the
+ * handle_list.
+ */
+static struct stripe_head *__get_priority_stripe(raid5_conf_t *conf)
+{
+ struct stripe_head *sh;
+
+ pr_debug("%s: handle: %s hold: %s full_writes: %d bypass_count: %d\n",
+ __func__,
+ list_empty(&conf->handle_list) ? "empty" : "busy",
+ list_empty(&conf->hold_list) ? "empty" : "busy",
+ atomic_read(&conf->pending_full_writes), conf->bypass_count);
+
+ if (!list_empty(&conf->handle_list)) {
+ sh = list_entry(conf->handle_list.next, typeof(*sh), lru);
+
+ if (list_empty(&conf->hold_list))
+ conf->bypass_count = 0;
+ else if (!test_bit(STRIPE_IO_STARTED, &sh->state)) {
+ if (conf->hold_list.next == conf->last_hold)
+ conf->bypass_count++;
+ else {
+ conf->last_hold = conf->hold_list.next;
+ conf->bypass_count -= conf->bypass_threshold;
+ if (conf->bypass_count < 0)
+ conf->bypass_count = 0;
+ }
+ }
+ } else if (!list_empty(&conf->hold_list) &&
+ ((conf->bypass_threshold &&
+ conf->bypass_count > conf->bypass_threshold) ||
+ atomic_read(&conf->pending_full_writes) == 0)) {
+ sh = list_entry(conf->hold_list.next,
+ typeof(*sh), lru);
+ conf->bypass_count -= conf->bypass_threshold;
+ if (conf->bypass_count < 0)
+ conf->bypass_count = 0;
+ } else
+ return NULL;
+
+ list_del_init(&sh->lru);
+ atomic_inc(&sh->count);
+ BUG_ON(atomic_read(&sh->count) != 1);
+ return sh;
+}
-static int make_request(request_queue_t *q, struct bio * bi)
+static int make_request(struct request_queue *q, struct bio * bi)
{
mddev_t *mddev = q->queuedata;
raid5_conf_t *conf = mddev_to_conf(mddev);
- unsigned int dd_idx, pd_idx;
+ int dd_idx;
sector_t new_sector;
sector_t logical_sector, last_sector;
struct stripe_head *sh;
const int rw = bio_data_dir(bi);
- int remaining;
+ int cpu, remaining;
if (unlikely(bio_barrier(bi))) {
- bio_endio(bi, bi->bi_size, -EOPNOTSUPP);
+ bio_endio(bi, -EOPNOTSUPP);
return 0;
}
md_write_start(mddev, bi);
- disk_stat_inc(mddev->gendisk, ios[rw]);
- disk_stat_add(mddev->gendisk, sectors[rw], bio_sectors(bi));
+ cpu = part_stat_lock();
+ part_stat_inc(cpu, &mddev->gendisk->part0, ios[rw]);
+ part_stat_add(cpu, &mddev->gendisk->part0, sectors[rw],
+ bio_sectors(bi));
+ part_stat_unlock();
- if (bio_data_dir(bi) == READ &&
+ if (rw == READ &&
mddev->reshape_position == MaxSector &&
chunk_aligned_read(q,bi))
- return 0;
+ return 0;
logical_sector = bi->bi_sector & ~((sector_t)STRIPE_SECTORS-1);
last_sector = bi->bi_sector + (bi->bi_size>>9);
for (;logical_sector < last_sector; logical_sector += STRIPE_SECTORS) {
DEFINE_WAIT(w);
int disks, data_disks;
+ int previous;
retry:
+ previous = 0;
+ disks = conf->raid_disks;
prepare_to_wait(&conf->wait_for_overlap, &w, TASK_UNINTERRUPTIBLE);
- if (likely(conf->expand_progress == MaxSector))
- disks = conf->raid_disks;
- else {
- /* spinlock is needed as expand_progress may be
+ if (unlikely(conf->reshape_progress != MaxSector)) {
+ /* spinlock is needed as reshape_progress may be
* 64bit on a 32bit platform, and so it might be
* possible to see a half-updated value
- * Ofcourse expand_progress could change after
+ * Ofcourse reshape_progress could change after
* the lock is dropped, so once we get a reference
* to the stripe that we think it is, we will have
* to check again.
*/
spin_lock_irq(&conf->device_lock);
- disks = conf->raid_disks;
- if (logical_sector >= conf->expand_progress)
+ if (mddev->delta_disks < 0
+ ? logical_sector < conf->reshape_progress
+ : logical_sector >= conf->reshape_progress) {
disks = conf->previous_raid_disks;
- else {
- if (logical_sector >= conf->expand_lo) {
+ previous = 1;
+ } else {
+ if (mddev->delta_disks < 0
+ ? logical_sector < conf->reshape_safe
+ : logical_sector >= conf->reshape_safe) {
spin_unlock_irq(&conf->device_lock);
schedule();
goto retry;
}
data_disks = disks - conf->max_degraded;
- new_sector = raid5_compute_sector(logical_sector, disks, data_disks,
- &dd_idx, &pd_idx, conf);
- PRINTK("raid5: make_request, sector %llu logical %llu\n",
+ new_sector = raid5_compute_sector(conf, logical_sector,
+ previous,
+ &dd_idx, NULL);
+ pr_debug("raid5: make_request, sector %llu logical %llu\n",
(unsigned long long)new_sector,
(unsigned long long)logical_sector);
- sh = get_active_stripe(conf, new_sector, disks, pd_idx, (bi->bi_rw&RWA_MASK));
+ sh = get_active_stripe(conf, new_sector, previous,
+ (bi->bi_rw&RWA_MASK));
if (sh) {
- if (unlikely(conf->expand_progress != MaxSector)) {
+ if (unlikely(previous)) {
/* expansion might have moved on while waiting for a
* stripe, so we must do the range check again.
* Expansion could still move past after this
*/
int must_retry = 0;
spin_lock_irq(&conf->device_lock);
- if (logical_sector < conf->expand_progress &&
- disks == conf->previous_raid_disks)
+ if (mddev->delta_disks < 0
+ ? logical_sector >= conf->reshape_progress
+ : logical_sector < conf->reshape_progress)
/* mismatch, need to try again */
must_retry = 1;
spin_unlock_irq(&conf->device_lock);
goto retry;
}
finish_wait(&conf->wait_for_overlap, &w);
- handle_stripe(sh, NULL);
+ set_bit(STRIPE_HANDLE, &sh->state);
+ clear_bit(STRIPE_DELAYED, &sh->state);
release_stripe(sh);
} else {
/* cannot get stripe for read-ahead, just give-up */
}
spin_lock_irq(&conf->device_lock);
- remaining = --bi->bi_phys_segments;
+ remaining = raid5_dec_bi_phys_segments(bi);
spin_unlock_irq(&conf->device_lock);
if (remaining == 0) {
- int bytes = bi->bi_size;
if ( rw == WRITE )
md_write_end(mddev);
- bi->bi_size = 0;
- bi->bi_end_io(bi, bytes, 0);
+
+ bio_endio(bi, 0);
}
return 0;
}
+static sector_t raid5_size(mddev_t *mddev, sector_t sectors, int raid_disks);
+
static sector_t reshape_request(mddev_t *mddev, sector_t sector_nr, int *skipped)
{
/* reshaping is quite different to recovery/resync so it is
*/
raid5_conf_t *conf = (raid5_conf_t *) mddev->private;
struct stripe_head *sh;
- int pd_idx;
sector_t first_sector, last_sector;
- int raid_disks;
- int data_disks;
+ int raid_disks = conf->previous_raid_disks;
+ int data_disks = raid_disks - conf->max_degraded;
+ int new_data_disks = conf->raid_disks - conf->max_degraded;
int i;
int dd_idx;
- sector_t writepos, safepos, gap;
-
- if (sector_nr == 0 &&
- conf->expand_progress != 0) {
- /* restarting in the middle, skip the initial sectors */
- sector_nr = conf->expand_progress;
- sector_div(sector_nr, conf->raid_disks-1);
- *skipped = 1;
- return sector_nr;
+ sector_t writepos, readpos, safepos;
+ sector_t stripe_addr;
+ int reshape_sectors;
+ struct list_head stripes;
+
+ if (sector_nr == 0) {
+ /* If restarting in the middle, skip the initial sectors */
+ if (mddev->delta_disks < 0 &&
+ conf->reshape_progress < raid5_size(mddev, 0, 0)) {
+ sector_nr = raid5_size(mddev, 0, 0)
+ - conf->reshape_progress;
+ } else if (mddev->delta_disks > 0 &&
+ conf->reshape_progress > 0)
+ sector_nr = conf->reshape_progress;
+ sector_div(sector_nr, new_data_disks);
+ if (sector_nr) {
+ *skipped = 1;
+ return sector_nr;
+ }
}
+ /* We need to process a full chunk at a time.
+ * If old and new chunk sizes differ, we need to process the
+ * largest of these
+ */
+ if (mddev->new_chunk > mddev->chunk_size)
+ reshape_sectors = mddev->new_chunk / 512;
+ else
+ reshape_sectors = mddev->chunk_size / 512;
+
/* we update the metadata when there is more than 3Meg
* in the block range (that is rather arbitrary, should
* probably be time based) or when the data about to be
* copied would over-write the source of the data at
* the front of the range.
- * i.e. one new_stripe forward from expand_progress new_maps
- * to after where expand_lo old_maps to
+ * i.e. one new_stripe along from reshape_progress new_maps
+ * to after where reshape_safe old_maps to
+ */
+ writepos = conf->reshape_progress;
+ sector_div(writepos, new_data_disks);
+ readpos = conf->reshape_progress;
+ sector_div(readpos, data_disks);
+ safepos = conf->reshape_safe;
+ sector_div(safepos, data_disks);
+ if (mddev->delta_disks < 0) {
+ writepos -= min_t(sector_t, reshape_sectors, writepos);
+ readpos += reshape_sectors;
+ safepos += reshape_sectors;
+ } else {
+ writepos += reshape_sectors;
+ readpos -= min_t(sector_t, reshape_sectors, readpos);
+ safepos -= min_t(sector_t, reshape_sectors, safepos);
+ }
+
+ /* 'writepos' is the most advanced device address we might write.
+ * 'readpos' is the least advanced device address we might read.
+ * 'safepos' is the least address recorded in the metadata as having
+ * been reshaped.
+ * If 'readpos' is behind 'writepos', then there is no way that we can
+ * ensure safety in the face of a crash - that must be done by userspace
+ * making a backup of the data. So in that case there is no particular
+ * rush to update metadata.
+ * Otherwise if 'safepos' is behind 'writepos', then we really need to
+ * update the metadata to advance 'safepos' to match 'readpos' so that
+ * we can be safe in the event of a crash.
+ * So we insist on updating metadata if safepos is behind writepos and
+ * readpos is beyond writepos.
+ * In any case, update the metadata every 10 seconds.
+ * Maybe that number should be configurable, but I'm not sure it is
+ * worth it.... maybe it could be a multiple of safemode_delay???
*/
- writepos = conf->expand_progress +
- conf->chunk_size/512*(conf->raid_disks-1);
- sector_div(writepos, conf->raid_disks-1);
- safepos = conf->expand_lo;
- sector_div(safepos, conf->previous_raid_disks-1);
- gap = conf->expand_progress - conf->expand_lo;
-
- if (writepos >= safepos ||
- gap > (conf->raid_disks-1)*3000*2 /*3Meg*/) {
+ if ((mddev->delta_disks < 0
+ ? (safepos > writepos && readpos < writepos)
+ : (safepos < writepos && readpos > writepos)) ||
+ time_after(jiffies, conf->reshape_checkpoint + 10*HZ)) {
/* Cannot proceed until we've updated the superblock... */
wait_event(conf->wait_for_overlap,
atomic_read(&conf->reshape_stripes)==0);
- mddev->reshape_position = conf->expand_progress;
+ mddev->reshape_position = conf->reshape_progress;
+ mddev->curr_resync_completed = mddev->curr_resync;
+ conf->reshape_checkpoint = jiffies;
set_bit(MD_CHANGE_DEVS, &mddev->flags);
md_wakeup_thread(mddev->thread);
wait_event(mddev->sb_wait, mddev->flags == 0 ||
kthread_should_stop());
spin_lock_irq(&conf->device_lock);
- conf->expand_lo = mddev->reshape_position;
+ conf->reshape_safe = mddev->reshape_position;
spin_unlock_irq(&conf->device_lock);
wake_up(&conf->wait_for_overlap);
+ sysfs_notify(&mddev->kobj, NULL, "sync_completed");
}
- for (i=0; i < conf->chunk_size/512; i+= STRIPE_SECTORS) {
+ if (mddev->delta_disks < 0) {
+ BUG_ON(conf->reshape_progress == 0);
+ stripe_addr = writepos;
+ BUG_ON((mddev->dev_sectors &
+ ~((sector_t)reshape_sectors - 1))
+ - reshape_sectors - stripe_addr
+ != sector_nr);
+ } else {
+ BUG_ON(writepos != sector_nr + reshape_sectors);
+ stripe_addr = sector_nr;
+ }
+ INIT_LIST_HEAD(&stripes);
+ for (i = 0; i < reshape_sectors; i += STRIPE_SECTORS) {
int j;
int skipped = 0;
- pd_idx = stripe_to_pdidx(sector_nr+i, conf, conf->raid_disks);
- sh = get_active_stripe(conf, sector_nr+i,
- conf->raid_disks, pd_idx, 0);
+ sh = get_active_stripe(conf, stripe_addr+i, 0, 0);
set_bit(STRIPE_EXPANDING, &sh->state);
atomic_inc(&conf->reshape_stripes);
/* If any of this stripe is beyond the end of the old
sector_t s;
if (j == sh->pd_idx)
continue;
- s = compute_blocknr(sh, j);
- if (s < (mddev->array_size<<1)) {
+ if (conf->level == 6 &&
+ j == sh->qd_idx)
+ continue;
+ s = compute_blocknr(sh, j, 0);
+ if (s < raid5_size(mddev, 0, 0)) {
skipped = 1;
continue;
}
set_bit(STRIPE_EXPAND_READY, &sh->state);
set_bit(STRIPE_HANDLE, &sh->state);
}
- release_stripe(sh);
+ list_add(&sh->lru, &stripes);
}
spin_lock_irq(&conf->device_lock);
- conf->expand_progress = (sector_nr + i)*(conf->raid_disks-1);
+ if (mddev->delta_disks < 0)
+ conf->reshape_progress -= reshape_sectors * new_data_disks;
+ else
+ conf->reshape_progress += reshape_sectors * new_data_disks;
spin_unlock_irq(&conf->device_lock);
/* Ok, those stripe are ready. We can start scheduling
* reads on the source stripes.
* The source stripes are determined by mapping the first and last
* block on the destination stripes.
*/
- raid_disks = conf->previous_raid_disks;
- data_disks = raid_disks - 1;
first_sector =
- raid5_compute_sector(sector_nr*(conf->raid_disks-1),
- raid_disks, data_disks,
- &dd_idx, &pd_idx, conf);
+ raid5_compute_sector(conf, stripe_addr*(new_data_disks),
+ 1, &dd_idx, NULL);
last_sector =
- raid5_compute_sector((sector_nr+conf->chunk_size/512)
- *(conf->raid_disks-1) -1,
- raid_disks, data_disks,
- &dd_idx, &pd_idx, conf);
- if (last_sector >= (mddev->size<<1))
- last_sector = (mddev->size<<1)-1;
+ raid5_compute_sector(conf, ((stripe_addr+conf->chunk_size/512)
+ *(new_data_disks) - 1),
+ 1, &dd_idx, NULL);
+ if (last_sector >= mddev->dev_sectors)
+ last_sector = mddev->dev_sectors - 1;
while (first_sector <= last_sector) {
- pd_idx = stripe_to_pdidx(first_sector, conf, conf->previous_raid_disks);
- sh = get_active_stripe(conf, first_sector,
- conf->previous_raid_disks, pd_idx, 0);
+ sh = get_active_stripe(conf, first_sector, 1, 0);
set_bit(STRIPE_EXPAND_SOURCE, &sh->state);
set_bit(STRIPE_HANDLE, &sh->state);
release_stripe(sh);
first_sector += STRIPE_SECTORS;
}
- return conf->chunk_size>>9;
+ /* Now that the sources are clearly marked, we can release
+ * the destination stripes
+ */
+ while (!list_empty(&stripes)) {
+ sh = list_entry(stripes.next, struct stripe_head, lru);
+ list_del_init(&sh->lru);
+ release_stripe(sh);
+ }
+ /* If this takes us to the resync_max point where we have to pause,
+ * then we need to write out the superblock.
+ */
+ sector_nr += reshape_sectors;
+ if ((sector_nr - mddev->curr_resync_completed) * 2
+ >= mddev->resync_max - mddev->curr_resync_completed) {
+ /* Cannot proceed until we've updated the superblock... */
+ wait_event(conf->wait_for_overlap,
+ atomic_read(&conf->reshape_stripes) == 0);
+ mddev->reshape_position = conf->reshape_progress;
+ mddev->curr_resync_completed = mddev->curr_resync;
+ conf->reshape_checkpoint = jiffies;
+ set_bit(MD_CHANGE_DEVS, &mddev->flags);
+ md_wakeup_thread(mddev->thread);
+ wait_event(mddev->sb_wait,
+ !test_bit(MD_CHANGE_DEVS, &mddev->flags)
+ || kthread_should_stop());
+ spin_lock_irq(&conf->device_lock);
+ conf->reshape_safe = mddev->reshape_position;
+ spin_unlock_irq(&conf->device_lock);
+ wake_up(&conf->wait_for_overlap);
+ sysfs_notify(&mddev->kobj, NULL, "sync_completed");
+ }
+ return reshape_sectors;
}
/* FIXME go_faster isn't used */
{
raid5_conf_t *conf = (raid5_conf_t *) mddev->private;
struct stripe_head *sh;
- int pd_idx;
- int raid_disks = conf->raid_disks;
- sector_t max_sector = mddev->size << 1;
+ sector_t max_sector = mddev->dev_sectors;
int sync_blocks;
int still_degraded = 0;
int i;
if (sector_nr >= max_sector) {
/* just being told to finish up .. nothing much to do */
unplug_slaves(mddev);
+
if (test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery)) {
end_reshape(conf);
return 0;
if (test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery))
return reshape_request(mddev, sector_nr, skipped);
+ /* No need to check resync_max as we never do more than one
+ * stripe, and as resync_max will always be on a chunk boundary,
+ * if the check in md_do_sync didn't fire, there is no chance
+ * of overstepping resync_max here
+ */
+
/* if there is too many failed drives and we are trying
* to resync, then assert that we are finished, because there is
* nothing we can do.
*/
if (mddev->degraded >= conf->max_degraded &&
test_bit(MD_RECOVERY_SYNC, &mddev->recovery)) {
- sector_t rv = (mddev->size << 1) - sector_nr;
+ sector_t rv = mddev->dev_sectors - sector_nr;
*skipped = 1;
return rv;
}
return sync_blocks * STRIPE_SECTORS; /* keep things rounded to whole stripes */
}
- pd_idx = stripe_to_pdidx(sector_nr, conf, raid_disks);
- sh = get_active_stripe(conf, sector_nr, raid_disks, pd_idx, 1);
+
+ bitmap_cond_end_sync(mddev->bitmap, sector_nr);
+
+ sh = get_active_stripe(conf, sector_nr, 0, 1);
if (sh == NULL) {
- sh = get_active_stripe(conf, sector_nr, raid_disks, pd_idx, 0);
+ sh = get_active_stripe(conf, sector_nr, 0, 0);
/* make sure we don't swamp the stripe cache if someone else
* is trying to get access
*/
clear_bit(STRIPE_INSYNC, &sh->state);
spin_unlock(&sh->lock);
- handle_stripe(sh, NULL);
+ /* wait for any blocked device to be handled */
+ while(unlikely(!handle_stripe(sh, NULL)))
+ ;
release_stripe(sh);
return STRIPE_SECTORS;
* it will be only one 'dd_idx' and only need one call to raid5_compute_sector.
*/
struct stripe_head *sh;
- int dd_idx, pd_idx;
+ int dd_idx;
sector_t sector, logical_sector, last_sector;
int scnt = 0;
int remaining;
int handled = 0;
logical_sector = raid_bio->bi_sector & ~((sector_t)STRIPE_SECTORS-1);
- sector = raid5_compute_sector( logical_sector,
- conf->raid_disks,
- conf->raid_disks - conf->max_degraded,
- &dd_idx,
- &pd_idx,
- conf);
+ sector = raid5_compute_sector(conf, logical_sector,
+ 0, &dd_idx, NULL);
last_sector = raid_bio->bi_sector + (raid_bio->bi_size>>9);
for (; logical_sector < last_sector;
- logical_sector += STRIPE_SECTORS, scnt++) {
+ logical_sector += STRIPE_SECTORS,
+ sector += STRIPE_SECTORS,
+ scnt++) {
- if (scnt < raid_bio->bi_hw_segments)
+ if (scnt < raid5_bi_hw_segments(raid_bio))
/* already done this stripe */
continue;
- sh = get_active_stripe(conf, sector, conf->raid_disks, pd_idx, 1);
+ sh = get_active_stripe(conf, sector, 0, 1);
if (!sh) {
/* failed to get a stripe - must wait */
- raid_bio->bi_hw_segments = scnt;
+ raid5_set_bi_hw_segments(raid_bio, scnt);
conf->retry_read_aligned = raid_bio;
return handled;
}
set_bit(R5_ReadError, &sh->dev[dd_idx].flags);
- add_stripe_bio(sh, raid_bio, dd_idx, 0);
+ if (!add_stripe_bio(sh, raid_bio, dd_idx, 0)) {
+ release_stripe(sh);
+ raid5_set_bi_hw_segments(raid_bio, scnt);
+ conf->retry_read_aligned = raid_bio;
+ return handled;
+ }
+
handle_stripe(sh, NULL);
release_stripe(sh);
handled++;
}
spin_lock_irq(&conf->device_lock);
- remaining = --raid_bio->bi_phys_segments;
+ remaining = raid5_dec_bi_phys_segments(raid_bio);
spin_unlock_irq(&conf->device_lock);
- if (remaining == 0) {
- int bytes = raid_bio->bi_size;
-
- raid_bio->bi_size = 0;
- raid_bio->bi_end_io(raid_bio, bytes, 0);
- }
+ if (remaining == 0)
+ bio_endio(raid_bio, 0);
if (atomic_dec_and_test(&conf->active_aligned_reads))
wake_up(&conf->wait_for_stripe);
return handled;
* During the scan, completed stripes are saved for us by the interrupt
* handler, so that they will not have to wait for our next wakeup.
*/
-static void raid5d (mddev_t *mddev)
+static void raid5d(mddev_t *mddev)
{
struct stripe_head *sh;
raid5_conf_t *conf = mddev_to_conf(mddev);
int handled;
- PRINTK("+++ raid5d active\n");
+ pr_debug("+++ raid5d active\n");
md_check_recovery(mddev);
handled = 0;
spin_lock_irq(&conf->device_lock);
while (1) {
- struct list_head *first;
struct bio *bio;
if (conf->seq_flush != conf->seq_write) {
activate_bit_delay(conf);
}
- if (list_empty(&conf->handle_list) &&
- atomic_read(&conf->preread_active_stripes) < IO_THRESHOLD &&
- !blk_queue_plugged(mddev->queue) &&
- !list_empty(&conf->delayed_list))
- raid5_activate_delayed(conf);
-
while ((bio = remove_bio_from_retry(conf))) {
int ok;
spin_unlock_irq(&conf->device_lock);
handled++;
}
- if (list_empty(&conf->handle_list))
- break;
-
- first = conf->handle_list.next;
- sh = list_entry(first, struct stripe_head, lru);
+ sh = __get_priority_stripe(conf);
- list_del_init(first);
- atomic_inc(&sh->count);
- BUG_ON(atomic_read(&sh->count)!= 1);
+ if (!sh)
+ break;
spin_unlock_irq(&conf->device_lock);
handled++;
spin_lock_irq(&conf->device_lock);
}
- PRINTK("%d stripes handled\n", handled);
+ pr_debug("%d stripes handled\n", handled);
spin_unlock_irq(&conf->device_lock);
+ async_tx_issue_pending_all();
unplug_slaves(mddev);
- PRINTK("--- raid5d inactive\n");
+ pr_debug("--- raid5d inactive\n");
}
static ssize_t
raid5_store_stripe_cache_size(mddev_t *mddev, const char *page, size_t len)
{
raid5_conf_t *conf = mddev_to_conf(mddev);
- char *end;
- int new;
+ unsigned long new;
+ int err;
+
if (len >= PAGE_SIZE)
return -EINVAL;
if (!conf)
return -ENODEV;
- new = simple_strtoul(page, &end, 10);
- if (!*page || (*end && *end != '\n') )
+ if (strict_strtoul(page, 10, &new))
return -EINVAL;
if (new <= 16 || new > 32768)
return -EINVAL;
else
break;
}
+ err = md_allow_write(mddev);
+ if (err)
+ return err;
while (new > conf->max_nr_stripes) {
if (grow_one_stripe(conf))
conf->max_nr_stripes++;
raid5_store_stripe_cache_size);
static ssize_t
+raid5_show_preread_threshold(mddev_t *mddev, char *page)
+{
+ raid5_conf_t *conf = mddev_to_conf(mddev);
+ if (conf)
+ return sprintf(page, "%d\n", conf->bypass_threshold);
+ else
+ return 0;
+}
+
+static ssize_t
+raid5_store_preread_threshold(mddev_t *mddev, const char *page, size_t len)
+{
+ raid5_conf_t *conf = mddev_to_conf(mddev);
+ unsigned long new;
+ if (len >= PAGE_SIZE)
+ return -EINVAL;
+ if (!conf)
+ return -ENODEV;
+
+ if (strict_strtoul(page, 10, &new))
+ return -EINVAL;
+ if (new > conf->max_nr_stripes)
+ return -EINVAL;
+ conf->bypass_threshold = new;
+ return len;
+}
+
+static struct md_sysfs_entry
+raid5_preread_bypass_threshold = __ATTR(preread_bypass_threshold,
+ S_IRUGO | S_IWUSR,
+ raid5_show_preread_threshold,
+ raid5_store_preread_threshold);
+
+static ssize_t
stripe_cache_active_show(mddev_t *mddev, char *page)
{
raid5_conf_t *conf = mddev_to_conf(mddev);
static struct attribute *raid5_attrs[] = {
&raid5_stripecache_size.attr,
&raid5_stripecache_active.attr,
+ &raid5_preread_bypass_threshold.attr,
NULL,
};
static struct attribute_group raid5_attrs_group = {
.attrs = raid5_attrs,
};
-static int run(mddev_t *mddev)
+static sector_t
+raid5_size(mddev_t *mddev, sector_t sectors, int raid_disks)
{
- raid5_conf_t *conf;
- int raid_disk, memory;
- mdk_rdev_t *rdev;
- struct disk_info *disk;
- struct list_head *tmp;
- int working_disks = 0;
+ raid5_conf_t *conf = mddev_to_conf(mddev);
- if (mddev->level != 5 && mddev->level != 4 && mddev->level != 6) {
- printk(KERN_ERR "raid5: %s: raid level not set to 4/5/6 (%d)\n",
- mdname(mddev), mddev->level);
- return -EIO;
+ if (!sectors)
+ sectors = mddev->dev_sectors;
+ if (!raid_disks) {
+ /* size is defined by the smallest of previous and new size */
+ if (conf->raid_disks < conf->previous_raid_disks)
+ raid_disks = conf->raid_disks;
+ else
+ raid_disks = conf->previous_raid_disks;
}
- if (mddev->reshape_position != MaxSector) {
- /* Check that we can continue the reshape.
- * Currently only disks can change, it must
- * increase, and we must be past the point where
- * a stripe over-writes itself
- */
- sector_t here_new, here_old;
- int old_disks;
-
- if (mddev->new_level != mddev->level ||
- mddev->new_layout != mddev->layout ||
- mddev->new_chunk != mddev->chunk_size) {
- printk(KERN_ERR "raid5: %s: unsupported reshape required - aborting.\n",
- mdname(mddev));
- return -EINVAL;
- }
- if (mddev->delta_disks <= 0) {
- printk(KERN_ERR "raid5: %s: unsupported reshape (reduce disks) required - aborting.\n",
- mdname(mddev));
- return -EINVAL;
- }
- old_disks = mddev->raid_disks - mddev->delta_disks;
- /* reshape_position must be on a new-stripe boundary, and one
- * further up in new geometry must map after here in old geometry.
- */
- here_new = mddev->reshape_position;
- if (sector_div(here_new, (mddev->chunk_size>>9)*(mddev->raid_disks-1))) {
- printk(KERN_ERR "raid5: reshape_position not on a stripe boundary\n");
- return -EINVAL;
- }
- /* here_new is the stripe we will write to */
- here_old = mddev->reshape_position;
- sector_div(here_old, (mddev->chunk_size>>9)*(old_disks-1));
- /* here_old is the first stripe that we might need to read from */
- if (here_new >= here_old) {
- /* Reading from the same stripe as writing to - bad */
- printk(KERN_ERR "raid5: reshape_position too early for auto-recovery - aborting.\n");
- return -EINVAL;
- }
- printk(KERN_INFO "raid5: reshape will continue\n");
- /* OK, we should be able to continue; */
+ sectors &= ~((sector_t)mddev->chunk_size/512 - 1);
+ sectors &= ~((sector_t)mddev->new_chunk/512 - 1);
+ return sectors * (raid_disks - conf->max_degraded);
+}
+
+static raid5_conf_t *setup_conf(mddev_t *mddev)
+{
+ raid5_conf_t *conf;
+ int raid_disk, memory;
+ mdk_rdev_t *rdev;
+ struct disk_info *disk;
+
+ if (mddev->new_level != 5
+ && mddev->new_level != 4
+ && mddev->new_level != 6) {
+ printk(KERN_ERR "raid5: %s: raid level not set to 4/5/6 (%d)\n",
+ mdname(mddev), mddev->new_level);
+ return ERR_PTR(-EIO);
+ }
+ if ((mddev->new_level == 5
+ && !algorithm_valid_raid5(mddev->new_layout)) ||
+ (mddev->new_level == 6
+ && !algorithm_valid_raid6(mddev->new_layout))) {
+ printk(KERN_ERR "raid5: %s: layout %d not supported\n",
+ mdname(mddev), mddev->new_layout);
+ return ERR_PTR(-EIO);
+ }
+ if (mddev->new_level == 6 && mddev->raid_disks < 4) {
+ printk(KERN_ERR "raid6: not enough configured devices for %s (%d, minimum 4)\n",
+ mdname(mddev), mddev->raid_disks);
+ return ERR_PTR(-EINVAL);
}
+ if (!mddev->new_chunk || mddev->new_chunk % PAGE_SIZE) {
+ printk(KERN_ERR "raid5: invalid chunk size %d for %s\n",
+ mddev->new_chunk, mdname(mddev));
+ return ERR_PTR(-EINVAL);
+ }
- mddev->private = kzalloc(sizeof (raid5_conf_t), GFP_KERNEL);
- if ((conf = mddev->private) == NULL)
+ conf = kzalloc(sizeof(raid5_conf_t), GFP_KERNEL);
+ if (conf == NULL)
goto abort;
- if (mddev->reshape_position == MaxSector) {
- conf->previous_raid_disks = conf->raid_disks = mddev->raid_disks;
- } else {
- conf->raid_disks = mddev->raid_disks;
+
+ conf->raid_disks = mddev->raid_disks;
+ if (mddev->reshape_position == MaxSector)
+ conf->previous_raid_disks = mddev->raid_disks;
+ else
conf->previous_raid_disks = mddev->raid_disks - mddev->delta_disks;
- }
conf->disks = kzalloc(conf->raid_disks * sizeof(struct disk_info),
GFP_KERNEL);
if ((conf->stripe_hashtbl = kzalloc(PAGE_SIZE, GFP_KERNEL)) == NULL)
goto abort;
- if (mddev->level == 6) {
+ if (mddev->new_level == 6) {
conf->spare_page = alloc_page(GFP_KERNEL);
if (!conf->spare_page)
goto abort;
init_waitqueue_head(&conf->wait_for_stripe);
init_waitqueue_head(&conf->wait_for_overlap);
INIT_LIST_HEAD(&conf->handle_list);
+ INIT_LIST_HEAD(&conf->hold_list);
INIT_LIST_HEAD(&conf->delayed_list);
INIT_LIST_HEAD(&conf->bitmap_list);
INIT_LIST_HEAD(&conf->inactive_list);
atomic_set(&conf->active_stripes, 0);
atomic_set(&conf->preread_active_stripes, 0);
atomic_set(&conf->active_aligned_reads, 0);
+ conf->bypass_threshold = BYPASS_THRESHOLD;
- PRINTK("raid5: run(%s) called.\n", mdname(mddev));
+ pr_debug("raid5: run(%s) called.\n", mdname(mddev));
- ITERATE_RDEV(mddev,rdev,tmp) {
+ list_for_each_entry(rdev, &mddev->disks, same_set) {
raid_disk = rdev->raid_disk;
if (raid_disk >= conf->raid_disks
|| raid_disk < 0)
printk(KERN_INFO "raid5: device %s operational as raid"
" disk %d\n", bdevname(rdev->bdev,b),
raid_disk);
- working_disks++;
- }
+ } else
+ /* Cannot rely on bitmap to complete recovery */
+ conf->fullsync = 1;
}
- /*
- * 0 for a fully functional array, 1 or 2 for a degraded array.
- */
- mddev->degraded = conf->raid_disks - working_disks;
- conf->mddev = mddev;
- conf->chunk_size = mddev->chunk_size;
- conf->level = mddev->level;
+ conf->chunk_size = mddev->new_chunk;
+ conf->level = mddev->new_level;
if (conf->level == 6)
conf->max_degraded = 2;
else
conf->max_degraded = 1;
- conf->algorithm = mddev->layout;
+ conf->algorithm = mddev->new_layout;
conf->max_nr_stripes = NR_STRIPES;
- conf->expand_progress = mddev->reshape_position;
-
- /* device size must be a multiple of chunk size */
- mddev->size &= ~(mddev->chunk_size/1024 -1);
- mddev->resync_max_sectors = mddev->size << 1;
+ conf->reshape_progress = mddev->reshape_position;
+ if (conf->reshape_progress != MaxSector) {
+ conf->prev_chunk = mddev->chunk_size;
+ conf->prev_algo = mddev->layout;
+ }
- if (conf->level == 6 && conf->raid_disks < 4) {
- printk(KERN_ERR "raid6: not enough configured devices for %s (%d, minimum 4)\n",
- mdname(mddev), conf->raid_disks);
+ memory = conf->max_nr_stripes * (sizeof(struct stripe_head) +
+ conf->raid_disks * ((sizeof(struct bio) + PAGE_SIZE))) / 1024;
+ if (grow_stripes(conf, conf->max_nr_stripes)) {
+ printk(KERN_ERR
+ "raid5: couldn't allocate %dkB for buffers\n", memory);
goto abort;
- }
- if (!conf->chunk_size || conf->chunk_size % 4) {
- printk(KERN_ERR "raid5: invalid chunk size %d for %s\n",
- conf->chunk_size, mdname(mddev));
+ } else
+ printk(KERN_INFO "raid5: allocated %dkB for %s\n",
+ memory, mdname(mddev));
+
+ conf->thread = md_register_thread(raid5d, mddev, "%s_raid5");
+ if (!conf->thread) {
+ printk(KERN_ERR
+ "raid5: couldn't allocate thread for %s\n",
+ mdname(mddev));
goto abort;
}
- if (conf->algorithm > ALGORITHM_RIGHT_SYMMETRIC) {
- printk(KERN_ERR
- "raid5: unsupported parity algorithm %d for %s\n",
- conf->algorithm, mdname(mddev));
- goto abort;
+
+ return conf;
+
+ abort:
+ if (conf) {
+ shrink_stripes(conf);
+ safe_put_page(conf->spare_page);
+ kfree(conf->disks);
+ kfree(conf->stripe_hashtbl);
+ kfree(conf);
+ return ERR_PTR(-EIO);
+ } else
+ return ERR_PTR(-ENOMEM);
+}
+
+static int run(mddev_t *mddev)
+{
+ raid5_conf_t *conf;
+ int working_disks = 0;
+ mdk_rdev_t *rdev;
+
+ if (mddev->reshape_position != MaxSector) {
+ /* Check that we can continue the reshape.
+ * Currently only disks can change, it must
+ * increase, and we must be past the point where
+ * a stripe over-writes itself
+ */
+ sector_t here_new, here_old;
+ int old_disks;
+ int max_degraded = (mddev->level == 6 ? 2 : 1);
+
+ if (mddev->new_level != mddev->level) {
+ printk(KERN_ERR "raid5: %s: unsupported reshape "
+ "required - aborting.\n",
+ mdname(mddev));
+ return -EINVAL;
+ }
+ old_disks = mddev->raid_disks - mddev->delta_disks;
+ /* reshape_position must be on a new-stripe boundary, and one
+ * further up in new geometry must map after here in old
+ * geometry.
+ */
+ here_new = mddev->reshape_position;
+ if (sector_div(here_new, (mddev->new_chunk>>9)*
+ (mddev->raid_disks - max_degraded))) {
+ printk(KERN_ERR "raid5: reshape_position not "
+ "on a stripe boundary\n");
+ return -EINVAL;
+ }
+ /* here_new is the stripe we will write to */
+ here_old = mddev->reshape_position;
+ sector_div(here_old, (mddev->chunk_size>>9)*
+ (old_disks-max_degraded));
+ /* here_old is the first stripe that we might need to read
+ * from */
+ if (here_new >= here_old) {
+ /* Reading from the same stripe as writing to - bad */
+ printk(KERN_ERR "raid5: reshape_position too early for "
+ "auto-recovery - aborting.\n");
+ return -EINVAL;
+ }
+ printk(KERN_INFO "raid5: reshape will continue\n");
+ /* OK, we should be able to continue; */
+ } else {
+ BUG_ON(mddev->level != mddev->new_level);
+ BUG_ON(mddev->layout != mddev->new_layout);
+ BUG_ON(mddev->chunk_size != mddev->new_chunk);
+ BUG_ON(mddev->delta_disks != 0);
}
+
+ if (mddev->private == NULL)
+ conf = setup_conf(mddev);
+ else
+ conf = mddev->private;
+
+ if (IS_ERR(conf))
+ return PTR_ERR(conf);
+
+ mddev->thread = conf->thread;
+ conf->thread = NULL;
+ mddev->private = conf;
+
+ /*
+ * 0 for a fully functional array, 1 or 2 for a degraded array.
+ */
+ list_for_each_entry(rdev, &mddev->disks, same_set)
+ if (rdev->raid_disk >= 0 &&
+ test_bit(In_sync, &rdev->flags))
+ working_disks++;
+
+ mddev->degraded = conf->raid_disks - working_disks;
+
if (mddev->degraded > conf->max_degraded) {
printk(KERN_ERR "raid5: not enough operational devices for %s"
" (%d/%d failed)\n",
goto abort;
}
+ /* device size must be a multiple of chunk size */
+ mddev->dev_sectors &= ~(mddev->chunk_size / 512 - 1);
+ mddev->resync_max_sectors = mddev->dev_sectors;
+
if (mddev->degraded > 0 &&
mddev->recovery_cp != MaxSector) {
if (mddev->ok_start_degraded)
}
}
- {
- mddev->thread = md_register_thread(raid5d, mddev, "%s_raid5");
- if (!mddev->thread) {
- printk(KERN_ERR
- "raid5: couldn't allocate thread for %s\n",
- mdname(mddev));
- goto abort;
- }
- }
- memory = conf->max_nr_stripes * (sizeof(struct stripe_head) +
- conf->raid_disks * ((sizeof(struct bio) + PAGE_SIZE))) / 1024;
- if (grow_stripes(conf, conf->max_nr_stripes)) {
- printk(KERN_ERR
- "raid5: couldn't allocate %dkB for buffers\n", memory);
- shrink_stripes(conf);
- md_unregister_thread(mddev->thread);
- goto abort;
- } else
- printk(KERN_INFO "raid5: allocated %dkB for %s\n",
- memory, mdname(mddev));
-
if (mddev->degraded == 0)
printk("raid5: raid level %d set %s active with %d out of %d"
- " devices, algorithm %d\n", conf->level, mdname(mddev),
- mddev->raid_disks-mddev->degraded, mddev->raid_disks,
- conf->algorithm);
+ " devices, algorithm %d\n", conf->level, mdname(mddev),
+ mddev->raid_disks-mddev->degraded, mddev->raid_disks,
+ mddev->new_layout);
else
printk(KERN_ALERT "raid5: raid level %d set %s active with %d"
" out of %d devices, algorithm %d\n", conf->level,
mdname(mddev), mddev->raid_disks - mddev->degraded,
- mddev->raid_disks, conf->algorithm);
+ mddev->raid_disks, mddev->new_layout);
print_raid5_conf(conf);
- if (conf->expand_progress != MaxSector) {
+ if (conf->reshape_progress != MaxSector) {
printk("...ok start reshape thread\n");
- conf->expand_lo = conf->expand_progress;
+ conf->reshape_safe = conf->reshape_progress;
atomic_set(&conf->reshape_stripes, 0);
clear_bit(MD_RECOVERY_SYNC, &mddev->recovery);
clear_bit(MD_RECOVERY_CHECK, &mddev->recovery);
}
/* Ok, everything is just fine now */
- sysfs_create_group(&mddev->kobj, &raid5_attrs_group);
+ if (sysfs_create_group(&mddev->kobj, &raid5_attrs_group))
+ printk(KERN_WARNING
+ "raid5: failed to create sysfs attributes for %s\n",
+ mdname(mddev));
+
+ mddev->queue->queue_lock = &conf->device_lock;
mddev->queue->unplug_fn = raid5_unplug_device;
- mddev->queue->issue_flush_fn = raid5_issue_flush;
- mddev->queue->backing_dev_info.congested_fn = raid5_congested;
mddev->queue->backing_dev_info.congested_data = mddev;
+ mddev->queue->backing_dev_info.congested_fn = raid5_congested;
- mddev->array_size = mddev->size * (conf->previous_raid_disks -
- conf->max_degraded);
+ md_set_array_sectors(mddev, raid5_size(mddev, 0, 0));
blk_queue_merge_bvec(mddev->queue, raid5_mergeable_bvec);
return 0;
abort:
+ md_unregister_thread(mddev->thread);
+ mddev->thread = NULL;
if (conf) {
+ shrink_stripes(conf);
print_raid5_conf(conf);
safe_put_page(conf->spare_page);
kfree(conf->disks);
mddev->thread = NULL;
shrink_stripes(conf);
kfree(conf->stripe_hashtbl);
+ mddev->queue->backing_dev_info.congested_fn = NULL;
blk_sync_queue(mddev->queue); /* the unplug fn references 'conf'*/
sysfs_remove_group(&mddev->kobj, &raid5_attrs_group);
kfree(conf->disks);
return 0;
}
-#if RAID5_DEBUG
-static void print_sh (struct seq_file *seq, struct stripe_head *sh)
+#ifdef DEBUG
+static void print_sh(struct seq_file *seq, struct stripe_head *sh)
{
int i;
seq_printf(seq, "\n");
}
-static void printall (struct seq_file *seq, raid5_conf_t *conf)
+static void printall(struct seq_file *seq, raid5_conf_t *conf)
{
struct stripe_head *sh;
struct hlist_node *hn;
}
#endif
-static void status (struct seq_file *seq, mddev_t *mddev)
+static void status(struct seq_file *seq, mddev_t *mddev)
{
raid5_conf_t *conf = (raid5_conf_t *) mddev->private;
int i;
conf->disks[i].rdev &&
test_bit(In_sync, &conf->disks[i].rdev->flags) ? "U" : "_");
seq_printf (seq, "]");
-#if RAID5_DEBUG
+#ifdef DEBUG
seq_printf (seq, "\n");
printall(seq, conf);
#endif
print_raid5_conf(conf);
rdev = p->rdev;
if (rdev) {
+ if (number >= conf->raid_disks &&
+ conf->reshape_progress == MaxSector)
+ clear_bit(In_sync, &rdev->flags);
+
if (test_bit(In_sync, &rdev->flags) ||
atomic_read(&rdev->nr_pending)) {
err = -EBUSY;
goto abort;
}
+ /* Only remove non-faulty devices if recovery
+ * isn't possible.
+ */
+ if (!test_bit(Faulty, &rdev->flags) &&
+ mddev->degraded <= conf->max_degraded &&
+ number < conf->raid_disks) {
+ err = -EBUSY;
+ goto abort;
+ }
p->rdev = NULL;
synchronize_rcu();
if (atomic_read(&rdev->nr_pending)) {
static int raid5_add_disk(mddev_t *mddev, mdk_rdev_t *rdev)
{
raid5_conf_t *conf = mddev->private;
- int found = 0;
+ int err = -EEXIST;
int disk;
struct disk_info *p;
+ int first = 0;
+ int last = conf->raid_disks - 1;
if (mddev->degraded > conf->max_degraded)
/* no point adding a device */
- return 0;
+ return -EINVAL;
+
+ if (rdev->raid_disk >= 0)
+ first = last = rdev->raid_disk;
/*
* find the disk ... but prefer rdev->saved_raid_disk
* if possible.
*/
if (rdev->saved_raid_disk >= 0 &&
+ rdev->saved_raid_disk >= first &&
conf->disks[rdev->saved_raid_disk].rdev == NULL)
disk = rdev->saved_raid_disk;
else
- disk = 0;
- for ( ; disk < conf->raid_disks; disk++)
+ disk = first;
+ for ( ; disk <= last ; disk++)
if ((p=conf->disks + disk)->rdev == NULL) {
clear_bit(In_sync, &rdev->flags);
rdev->raid_disk = disk;
- found = 1;
+ err = 0;
if (rdev->saved_raid_disk != disk)
conf->fullsync = 1;
rcu_assign_pointer(p->rdev, rdev);
break;
}
print_raid5_conf(conf);
- return found;
+ return err;
}
static int raid5_resize(mddev_t *mddev, sector_t sectors)
* any io in the removed space completes, but it hardly seems
* worth it.
*/
- raid5_conf_t *conf = mddev_to_conf(mddev);
-
sectors &= ~((sector_t)mddev->chunk_size/512 - 1);
- mddev->array_size = (sectors * (mddev->raid_disks-conf->max_degraded))>>1;
- set_capacity(mddev->gendisk, mddev->array_size << 1);
+ md_set_array_sectors(mddev, raid5_size(mddev, sectors,
+ mddev->raid_disks));
+ if (mddev->array_sectors >
+ raid5_size(mddev, sectors, mddev->raid_disks))
+ return -EINVAL;
+ set_capacity(mddev->gendisk, mddev->array_sectors);
mddev->changed = 1;
- if (sectors/2 > mddev->size && mddev->recovery_cp == MaxSector) {
- mddev->recovery_cp = mddev->size << 1;
+ if (sectors > mddev->dev_sectors && mddev->recovery_cp == MaxSector) {
+ mddev->recovery_cp = mddev->dev_sectors;
set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
}
- mddev->size = sectors /2;
+ mddev->dev_sectors = sectors;
mddev->resync_max_sectors = sectors;
return 0;
}
-#ifdef CONFIG_MD_RAID5_RESHAPE
static int raid5_check_reshape(mddev_t *mddev)
{
raid5_conf_t *conf = mddev_to_conf(mddev);
- int err;
- if (mddev->delta_disks < 0 ||
- mddev->new_level != mddev->level)
- return -EINVAL; /* Cannot shrink array or change level yet */
- if (mddev->delta_disks == 0)
- return 0; /* nothing to do */
+ if (mddev->delta_disks == 0 &&
+ mddev->new_layout == mddev->layout &&
+ mddev->new_chunk == mddev->chunk_size)
+ return -EINVAL; /* nothing to do */
+ if (mddev->bitmap)
+ /* Cannot grow a bitmap yet */
+ return -EBUSY;
+ if (mddev->degraded > conf->max_degraded)
+ return -EINVAL;
+ if (mddev->delta_disks < 0) {
+ /* We might be able to shrink, but the devices must
+ * be made bigger first.
+ * For raid6, 4 is the minimum size.
+ * Otherwise 2 is the minimum
+ */
+ int min = 2;
+ if (mddev->level == 6)
+ min = 4;
+ if (mddev->raid_disks + mddev->delta_disks < min)
+ return -EINVAL;
+ }
/* Can only proceed if there are plenty of stripe_heads.
* We need a minimum of one full stripe,, and for sensible progress
if ((mddev->chunk_size / STRIPE_SIZE) * 4 > conf->max_nr_stripes ||
(mddev->new_chunk / STRIPE_SIZE) * 4 > conf->max_nr_stripes) {
printk(KERN_WARNING "raid5: reshape: not enough stripes. Needed %lu\n",
- (mddev->chunk_size / STRIPE_SIZE)*4);
+ (max(mddev->chunk_size, mddev->new_chunk)
+ / STRIPE_SIZE)*4);
return -ENOSPC;
}
- err = resize_stripes(conf, conf->raid_disks + mddev->delta_disks);
- if (err)
- return err;
-
- /* looks like we might be able to manage this */
- return 0;
+ return resize_stripes(conf, conf->raid_disks + mddev->delta_disks);
}
static int raid5_start_reshape(mddev_t *mddev)
{
raid5_conf_t *conf = mddev_to_conf(mddev);
mdk_rdev_t *rdev;
- struct list_head *rtmp;
int spares = 0;
int added_devices = 0;
unsigned long flags;
- if (mddev->degraded ||
- test_bit(MD_RECOVERY_RUNNING, &mddev->recovery))
+ if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery))
return -EBUSY;
- ITERATE_RDEV(mddev, rdev, rtmp)
+ list_for_each_entry(rdev, &mddev->disks, same_set)
if (rdev->raid_disk < 0 &&
!test_bit(Faulty, &rdev->flags))
spares++;
- if (spares < mddev->delta_disks-1)
+ if (spares - mddev->degraded < mddev->delta_disks - conf->max_degraded)
/* Not enough devices even to make a degraded array
* of that size
*/
return -EINVAL;
+ /* Refuse to reduce size of the array. Any reductions in
+ * array size must be through explicit setting of array_size
+ * attribute.
+ */
+ if (raid5_size(mddev, 0, conf->raid_disks + mddev->delta_disks)
+ < mddev->array_sectors) {
+ printk(KERN_ERR "md: %s: array size must be reduced "
+ "before number of disks\n", mdname(mddev));
+ return -EINVAL;
+ }
+
atomic_set(&conf->reshape_stripes, 0);
spin_lock_irq(&conf->device_lock);
conf->previous_raid_disks = conf->raid_disks;
conf->raid_disks += mddev->delta_disks;
- conf->expand_progress = 0;
- conf->expand_lo = 0;
+ conf->prev_chunk = conf->chunk_size;
+ conf->chunk_size = mddev->new_chunk;
+ conf->prev_algo = conf->algorithm;
+ conf->algorithm = mddev->new_layout;
+ if (mddev->delta_disks < 0)
+ conf->reshape_progress = raid5_size(mddev, 0, 0);
+ else
+ conf->reshape_progress = 0;
+ conf->reshape_safe = conf->reshape_progress;
+ conf->generation++;
spin_unlock_irq(&conf->device_lock);
/* Add some new drives, as many as will fit.
* We know there are enough to make the newly sized array work.
*/
- ITERATE_RDEV(mddev, rdev, rtmp)
+ list_for_each_entry(rdev, &mddev->disks, same_set)
if (rdev->raid_disk < 0 &&
!test_bit(Faulty, &rdev->flags)) {
- if (raid5_add_disk(mddev, rdev)) {
+ if (raid5_add_disk(mddev, rdev) == 0) {
char nm[20];
set_bit(In_sync, &rdev->flags);
added_devices++;
rdev->recovery_offset = 0;
sprintf(nm, "rd%d", rdev->raid_disk);
- sysfs_create_link(&mddev->kobj, &rdev->kobj, nm);
+ if (sysfs_create_link(&mddev->kobj,
+ &rdev->kobj, nm))
+ printk(KERN_WARNING
+ "raid5: failed to create "
+ " link %s for %s\n",
+ nm, mdname(mddev));
} else
break;
}
- spin_lock_irqsave(&conf->device_lock, flags);
- mddev->degraded = (conf->raid_disks - conf->previous_raid_disks) - added_devices;
- spin_unlock_irqrestore(&conf->device_lock, flags);
+ if (mddev->delta_disks > 0) {
+ spin_lock_irqsave(&conf->device_lock, flags);
+ mddev->degraded = (conf->raid_disks - conf->previous_raid_disks)
+ - added_devices;
+ spin_unlock_irqrestore(&conf->device_lock, flags);
+ }
mddev->raid_disks = conf->raid_disks;
mddev->reshape_position = 0;
set_bit(MD_CHANGE_DEVS, &mddev->flags);
mddev->recovery = 0;
spin_lock_irq(&conf->device_lock);
mddev->raid_disks = conf->raid_disks = conf->previous_raid_disks;
- conf->expand_progress = MaxSector;
+ conf->reshape_progress = MaxSector;
spin_unlock_irq(&conf->device_lock);
return -EAGAIN;
}
+ conf->reshape_checkpoint = jiffies;
md_wakeup_thread(mddev->sync_thread);
md_new_event(mddev);
return 0;
}
-#endif
+/* This is called from the reshape thread and should make any
+ * changes needed in 'conf'
+ */
static void end_reshape(raid5_conf_t *conf)
{
- struct block_device *bdev;
if (!test_bit(MD_RECOVERY_INTR, &conf->mddev->recovery)) {
- conf->mddev->array_size = conf->mddev->size * (conf->raid_disks-1);
- set_capacity(conf->mddev->gendisk, conf->mddev->array_size << 1);
- conf->mddev->changed = 1;
- bdev = bdget_disk(conf->mddev->gendisk, 0);
- if (bdev) {
- mutex_lock(&bdev->bd_inode->i_mutex);
- i_size_write(bdev->bd_inode, (loff_t)conf->mddev->array_size << 10);
- mutex_unlock(&bdev->bd_inode->i_mutex);
- bdput(bdev);
- }
spin_lock_irq(&conf->device_lock);
- conf->expand_progress = MaxSector;
+ conf->previous_raid_disks = conf->raid_disks;
+ conf->reshape_progress = MaxSector;
spin_unlock_irq(&conf->device_lock);
- conf->mddev->reshape_position = MaxSector;
+ wake_up(&conf->wait_for_overlap);
/* read-ahead size must cover two whole stripes, which is
* 2 * (datadisks) * chunksize where 'n' is the number of raid devices
*/
{
- int data_disks = conf->previous_raid_disks - conf->max_degraded;
- int stripe = data_disks *
- (conf->mddev->chunk_size / PAGE_SIZE);
+ int data_disks = conf->raid_disks - conf->max_degraded;
+ int stripe = data_disks * (conf->chunk_size
+ / PAGE_SIZE);
if (conf->mddev->queue->backing_dev_info.ra_pages < 2 * stripe)
conf->mddev->queue->backing_dev_info.ra_pages = 2 * stripe;
}
}
}
+/* This is called from the raid5d thread with mddev_lock held.
+ * It makes config changes to the device.
+ */
+static void raid5_finish_reshape(mddev_t *mddev)
+{
+ struct block_device *bdev;
+ raid5_conf_t *conf = mddev_to_conf(mddev);
+
+ if (!test_bit(MD_RECOVERY_INTR, &mddev->recovery)) {
+
+ if (mddev->delta_disks > 0) {
+ md_set_array_sectors(mddev, raid5_size(mddev, 0, 0));
+ set_capacity(mddev->gendisk, mddev->array_sectors);
+ mddev->changed = 1;
+
+ bdev = bdget_disk(mddev->gendisk, 0);
+ if (bdev) {
+ mutex_lock(&bdev->bd_inode->i_mutex);
+ i_size_write(bdev->bd_inode,
+ (loff_t)mddev->array_sectors << 9);
+ mutex_unlock(&bdev->bd_inode->i_mutex);
+ bdput(bdev);
+ }
+ } else {
+ int d;
+ mddev->degraded = conf->raid_disks;
+ for (d = 0; d < conf->raid_disks ; d++)
+ if (conf->disks[d].rdev &&
+ test_bit(In_sync,
+ &conf->disks[d].rdev->flags))
+ mddev->degraded--;
+ for (d = conf->raid_disks ;
+ d < conf->raid_disks - mddev->delta_disks;
+ d++)
+ raid5_remove_disk(mddev, d);
+ }
+ mddev->layout = conf->algorithm;
+ mddev->chunk_size = conf->chunk_size;
+ mddev->reshape_position = MaxSector;
+ mddev->delta_disks = 0;
+ }
+}
+
static void raid5_quiesce(mddev_t *mddev, int state)
{
raid5_conf_t *conf = mddev_to_conf(mddev);
}
}
+
+static void *raid5_takeover_raid1(mddev_t *mddev)
+{
+ int chunksect;
+
+ if (mddev->raid_disks != 2 ||
+ mddev->degraded > 1)
+ return ERR_PTR(-EINVAL);
+
+ /* Should check if there are write-behind devices? */
+
+ chunksect = 64*2; /* 64K by default */
+
+ /* The array must be an exact multiple of chunksize */
+ while (chunksect && (mddev->array_sectors & (chunksect-1)))
+ chunksect >>= 1;
+
+ if ((chunksect<<9) < STRIPE_SIZE)
+ /* array size does not allow a suitable chunk size */
+ return ERR_PTR(-EINVAL);
+
+ mddev->new_level = 5;
+ mddev->new_layout = ALGORITHM_LEFT_SYMMETRIC;
+ mddev->new_chunk = chunksect << 9;
+
+ return setup_conf(mddev);
+}
+
+static void *raid5_takeover_raid6(mddev_t *mddev)
+{
+ int new_layout;
+
+ switch (mddev->layout) {
+ case ALGORITHM_LEFT_ASYMMETRIC_6:
+ new_layout = ALGORITHM_LEFT_ASYMMETRIC;
+ break;
+ case ALGORITHM_RIGHT_ASYMMETRIC_6:
+ new_layout = ALGORITHM_RIGHT_ASYMMETRIC;
+ break;
+ case ALGORITHM_LEFT_SYMMETRIC_6:
+ new_layout = ALGORITHM_LEFT_SYMMETRIC;
+ break;
+ case ALGORITHM_RIGHT_SYMMETRIC_6:
+ new_layout = ALGORITHM_RIGHT_SYMMETRIC;
+ break;
+ case ALGORITHM_PARITY_0_6:
+ new_layout = ALGORITHM_PARITY_0;
+ break;
+ case ALGORITHM_PARITY_N:
+ new_layout = ALGORITHM_PARITY_N;
+ break;
+ default:
+ return ERR_PTR(-EINVAL);
+ }
+ mddev->new_level = 5;
+ mddev->new_layout = new_layout;
+ mddev->delta_disks = -1;
+ mddev->raid_disks -= 1;
+ return setup_conf(mddev);
+}
+
+
+static int raid5_reconfig(mddev_t *mddev, int new_layout, int new_chunk)
+{
+ /* For a 2-drive array, the layout and chunk size can be changed
+ * immediately as not restriping is needed.
+ * For larger arrays we record the new value - after validation
+ * to be used by a reshape pass.
+ */
+ raid5_conf_t *conf = mddev_to_conf(mddev);
+
+ if (new_layout >= 0 && !algorithm_valid_raid5(new_layout))
+ return -EINVAL;
+ if (new_chunk > 0) {
+ if (new_chunk & (new_chunk-1))
+ /* not a power of 2 */
+ return -EINVAL;
+ if (new_chunk < PAGE_SIZE)
+ return -EINVAL;
+ if (mddev->array_sectors & ((new_chunk>>9)-1))
+ /* not factor of array size */
+ return -EINVAL;
+ }
+
+ /* They look valid */
+
+ if (mddev->raid_disks == 2) {
+
+ if (new_layout >= 0) {
+ conf->algorithm = new_layout;
+ mddev->layout = mddev->new_layout = new_layout;
+ }
+ if (new_chunk > 0) {
+ conf->chunk_size = new_chunk;
+ mddev->chunk_size = mddev->new_chunk = new_chunk;
+ }
+ set_bit(MD_CHANGE_DEVS, &mddev->flags);
+ md_wakeup_thread(mddev->thread);
+ } else {
+ if (new_layout >= 0)
+ mddev->new_layout = new_layout;
+ if (new_chunk > 0)
+ mddev->new_chunk = new_chunk;
+ }
+ return 0;
+}
+
+static int raid6_reconfig(mddev_t *mddev, int new_layout, int new_chunk)
+{
+ if (new_layout >= 0 && !algorithm_valid_raid6(new_layout))
+ return -EINVAL;
+ if (new_chunk > 0) {
+ if (new_chunk & (new_chunk-1))
+ /* not a power of 2 */
+ return -EINVAL;
+ if (new_chunk < PAGE_SIZE)
+ return -EINVAL;
+ if (mddev->array_sectors & ((new_chunk>>9)-1))
+ /* not factor of array size */
+ return -EINVAL;
+ }
+
+ /* They look valid */
+
+ if (new_layout >= 0)
+ mddev->new_layout = new_layout;
+ if (new_chunk > 0)
+ mddev->new_chunk = new_chunk;
+
+ return 0;
+}
+
+static void *raid5_takeover(mddev_t *mddev)
+{
+ /* raid5 can take over:
+ * raid0 - if all devices are the same - make it a raid4 layout
+ * raid1 - if there are two drives. We need to know the chunk size
+ * raid4 - trivial - just use a raid4 layout.
+ * raid6 - Providing it is a *_6 layout
+ *
+ * For now, just do raid1
+ */
+
+ if (mddev->level == 1)
+ return raid5_takeover_raid1(mddev);
+ if (mddev->level == 4) {
+ mddev->new_layout = ALGORITHM_PARITY_N;
+ mddev->new_level = 5;
+ return setup_conf(mddev);
+ }
+ if (mddev->level == 6)
+ return raid5_takeover_raid6(mddev);
+
+ return ERR_PTR(-EINVAL);
+}
+
+
+static struct mdk_personality raid5_personality;
+
+static void *raid6_takeover(mddev_t *mddev)
+{
+ /* Currently can only take over a raid5. We map the
+ * personality to an equivalent raid6 personality
+ * with the Q block at the end.
+ */
+ int new_layout;
+
+ if (mddev->pers != &raid5_personality)
+ return ERR_PTR(-EINVAL);
+ if (mddev->degraded > 1)
+ return ERR_PTR(-EINVAL);
+ if (mddev->raid_disks > 253)
+ return ERR_PTR(-EINVAL);
+ if (mddev->raid_disks < 3)
+ return ERR_PTR(-EINVAL);
+
+ switch (mddev->layout) {
+ case ALGORITHM_LEFT_ASYMMETRIC:
+ new_layout = ALGORITHM_LEFT_ASYMMETRIC_6;
+ break;
+ case ALGORITHM_RIGHT_ASYMMETRIC:
+ new_layout = ALGORITHM_RIGHT_ASYMMETRIC_6;
+ break;
+ case ALGORITHM_LEFT_SYMMETRIC:
+ new_layout = ALGORITHM_LEFT_SYMMETRIC_6;
+ break;
+ case ALGORITHM_RIGHT_SYMMETRIC:
+ new_layout = ALGORITHM_RIGHT_SYMMETRIC_6;
+ break;
+ case ALGORITHM_PARITY_0:
+ new_layout = ALGORITHM_PARITY_0_6;
+ break;
+ case ALGORITHM_PARITY_N:
+ new_layout = ALGORITHM_PARITY_N;
+ break;
+ default:
+ return ERR_PTR(-EINVAL);
+ }
+ mddev->new_level = 6;
+ mddev->new_layout = new_layout;
+ mddev->delta_disks = 1;
+ mddev->raid_disks += 1;
+ return setup_conf(mddev);
+}
+
+
static struct mdk_personality raid6_personality =
{
.name = "raid6",
.spare_active = raid5_spare_active,
.sync_request = sync_request,
.resize = raid5_resize,
+ .size = raid5_size,
+ .check_reshape = raid5_check_reshape,
+ .start_reshape = raid5_start_reshape,
+ .finish_reshape = raid5_finish_reshape,
.quiesce = raid5_quiesce,
+ .takeover = raid6_takeover,
+ .reconfig = raid6_reconfig,
};
static struct mdk_personality raid5_personality =
{
.spare_active = raid5_spare_active,
.sync_request = sync_request,
.resize = raid5_resize,
-#ifdef CONFIG_MD_RAID5_RESHAPE
+ .size = raid5_size,
.check_reshape = raid5_check_reshape,
.start_reshape = raid5_start_reshape,
-#endif
+ .finish_reshape = raid5_finish_reshape,
.quiesce = raid5_quiesce,
+ .takeover = raid5_takeover,
+ .reconfig = raid5_reconfig,
};
static struct mdk_personality raid4_personality =
.spare_active = raid5_spare_active,
.sync_request = sync_request,
.resize = raid5_resize,
+ .size = raid5_size,
+ .check_reshape = raid5_check_reshape,
+ .start_reshape = raid5_start_reshape,
+ .finish_reshape = raid5_finish_reshape,
.quiesce = raid5_quiesce,
};
static int __init raid5_init(void)
{
- int e;
-
- e = raid6_select_algo();
- if ( e )
- return e;
register_md_personality(&raid6_personality);
register_md_personality(&raid5_personality);
register_md_personality(&raid4_personality);