if (dev < 0)
dev += conf->raid_disks;
} else {
- while (sector > conf->stride) {
+ while (sector >= conf->stride) {
sector -= conf->stride;
if (dev < conf->near_copies)
dev += conf->raid_disks - conf->near_copies;
return ret;
}
+static int raid10_congested(void *data, int bits)
+{
+ mddev_t *mddev = data;
+ conf_t *conf = mddev_to_conf(mddev);
+ int i, ret = 0;
+
+ rcu_read_lock();
+ for (i = 0; i < mddev->raid_disks && ret == 0; i++) {
+ mdk_rdev_t *rdev = rcu_dereference(conf->mirrors[i].rdev);
+ if (rdev && !test_bit(Faulty, &rdev->flags)) {
+ request_queue_t *q = bdev_get_queue(rdev->bdev);
+
+ ret |= bdi_congested(&q->backing_dev_info, bits);
+ }
+ }
+ rcu_read_unlock();
+ return ret;
+}
+
+
/* Barriers....
* Sometimes we need to suspend IO while we do something else,
* either some resync/recovery, or reconfigure the array.
int i;
int chunk_sects = conf->chunk_mask + 1;
const int rw = bio_data_dir(bio);
+ const int do_sync = bio_sync(bio);
struct bio_list bl;
unsigned long flags;
mirror->rdev->data_offset;
read_bio->bi_bdev = mirror->rdev->bdev;
read_bio->bi_end_io = raid10_end_read_request;
- read_bio->bi_rw = READ;
+ read_bio->bi_rw = READ | do_sync;
read_bio->bi_private = r10_bio;
generic_make_request(read_bio);
conf->mirrors[d].rdev->data_offset;
mbio->bi_bdev = conf->mirrors[d].rdev->bdev;
mbio->bi_end_io = raid10_end_write_request;
- mbio->bi_rw = WRITE;
+ mbio->bi_rw = WRITE | do_sync;
mbio->bi_private = r10_bio;
atomic_inc(&r10_bio->remaining);
blk_plug_device(mddev->queue);
spin_unlock_irqrestore(&conf->device_lock, flags);
+ if (do_sync)
+ md_wakeup_thread(mddev->thread);
+
return 0;
}
seq_printf(seq, " %d far-copies", conf->far_copies);
}
seq_printf(seq, " [%d/%d] [", conf->raid_disks,
- conf->working_disks);
+ conf->raid_disks - mddev->degraded);
for (i = 0; i < conf->raid_disks; i++)
seq_printf(seq, "%s",
conf->mirrors[i].rdev &&
* else mark the drive as failed
*/
if (test_bit(In_sync, &rdev->flags)
- && conf->working_disks == 1)
+ && conf->raid_disks-mddev->degraded == 1)
/*
* Don't fail the drive, just return an IO error.
* The test should really be more sophisticated than
* really dead" tests...
*/
return;
- if (test_bit(In_sync, &rdev->flags)) {
+ if (test_and_clear_bit(In_sync, &rdev->flags)) {
+ unsigned long flags;
+ spin_lock_irqsave(&conf->device_lock, flags);
mddev->degraded++;
- conf->working_disks--;
+ spin_unlock_irqrestore(&conf->device_lock, flags);
/*
* if recovery is running, make sure it aborts.
*/
set_bit(MD_RECOVERY_ERR, &mddev->recovery);
}
- clear_bit(In_sync, &rdev->flags);
set_bit(Faulty, &rdev->flags);
- mddev->sb_dirty = 1;
+ set_bit(MD_CHANGE_DEVS, &mddev->flags);
printk(KERN_ALERT "raid10: Disk failure on %s, disabling device. \n"
" Operation continuing on %d devices\n",
- bdevname(rdev->bdev,b), conf->working_disks);
+ bdevname(rdev->bdev,b), conf->raid_disks - mddev->degraded);
}
static void print_conf(conf_t *conf)
printk("(!conf)\n");
return;
}
- printk(" --- wd:%d rd:%d\n", conf->working_disks,
+ printk(" --- wd:%d rd:%d\n", conf->raid_disks - conf->mddev->degraded,
conf->raid_disks);
for (i = 0; i < conf->raid_disks; i++) {
tmp = conf->mirrors + i;
if (tmp->rdev
&& !test_bit(Faulty, &tmp->rdev->flags)
- && !test_bit(In_sync, &tmp->rdev->flags)) {
- conf->working_disks++;
+ && !test_and_set_bit(In_sync, &tmp->rdev->flags)) {
+ unsigned long flags;
+ spin_lock_irqsave(&conf->device_lock, flags);
mddev->degraded--;
- set_bit(In_sync, &tmp->rdev->flags);
+ spin_unlock_irqrestore(&conf->device_lock, flags);
}
}
"raid10:%s: read error corrected"
" (%d sectors at %llu on %s)\n",
mdname(mddev), s,
- (unsigned long long)sect+
- rdev->data_offset,
+ (unsigned long long)(sect+
+ rdev->data_offset),
bdevname(rdev->bdev, b));
rdev_dec_pending(rdev, mddev);
(unsigned long long)r10_bio->sector);
raid_end_bio_io(r10_bio);
} else {
+ const int do_sync = bio_sync(r10_bio->master_bio);
rdev = conf->mirrors[mirror].rdev;
if (printk_ratelimit())
printk(KERN_ERR "raid10: %s: redirecting sector %llu to"
bio->bi_sector = r10_bio->devs[r10_bio->read_slot].addr
+ rdev->data_offset;
bio->bi_bdev = rdev->bdev;
- bio->bi_rw = READ;
+ bio->bi_rw = READ | do_sync;
bio->bi_private = r10_bio;
bio->bi_end_io = raid10_end_read_request;
unplug = 1;
biolist = bio;
bio->bi_private = r10_bio;
bio->bi_end_io = end_sync_read;
- bio->bi_rw = 0;
+ bio->bi_rw = READ;
bio->bi_sector = r10_bio->devs[j].addr +
conf->mirrors[d].rdev->data_offset;
bio->bi_bdev = conf->mirrors[d].rdev->bdev;
for (k=0; k<conf->copies; k++)
if (r10_bio->devs[k].devnum == i)
break;
+ BUG_ON(k == conf->copies);
bio = r10_bio->devs[1].bio;
bio->bi_next = biolist;
biolist = bio;
bio->bi_private = r10_bio;
bio->bi_end_io = end_sync_write;
- bio->bi_rw = 1;
+ bio->bi_rw = WRITE;
bio->bi_sector = r10_bio->devs[k].addr +
conf->mirrors[i].rdev->data_offset;
bio->bi_bdev = conf->mirrors[i].rdev->bdev;
int d = r10_bio->devs[i].devnum;
bio = r10_bio->devs[i].bio;
bio->bi_end_io = NULL;
+ clear_bit(BIO_UPTODATE, &bio->bi_flags);
if (conf->mirrors[d].rdev == NULL ||
test_bit(Faulty, &conf->mirrors[d].rdev->flags))
continue;
biolist = bio;
bio->bi_private = r10_bio;
bio->bi_end_io = end_sync_read;
- bio->bi_rw = 0;
+ bio->bi_rw = READ;
bio->bi_sector = r10_bio->devs[i].addr +
conf->mirrors[d].rdev->data_offset;
bio->bi_bdev = conf->mirrors[d].rdev->bdev;
if (!conf->tmppage)
goto out_free_conf;
+ conf->mddev = mddev;
+ conf->raid_disks = mddev->raid_disks;
conf->near_copies = nc;
conf->far_copies = fc;
conf->copies = nc*fc;
conf->far_offset = fo;
conf->chunk_mask = (sector_t)(mddev->chunk_size>>9)-1;
conf->chunk_shift = ffz(~mddev->chunk_size) - 9;
+ size = mddev->size >> (conf->chunk_shift-1);
+ sector_div(size, fc);
+ size = size * conf->raid_disks;
+ sector_div(size, nc);
+ /* 'size' is now the number of chunks in the array */
+ /* calculate "used chunks per device" in 'stride' */
+ stride = size * conf->copies;
+
+ /* We need to round up when dividing by raid_disks to
+ * get the stride size.
+ */
+ stride += conf->raid_disks - 1;
+ sector_div(stride, conf->raid_disks);
+ mddev->size = stride << (conf->chunk_shift-1);
+
if (fo)
- conf->stride = 1 << conf->chunk_shift;
- else {
- stride = mddev->size >> (conf->chunk_shift-1);
+ stride = 1;
+ else
sector_div(stride, fc);
- conf->stride = stride << conf->chunk_shift;
- }
+ conf->stride = stride << conf->chunk_shift;
+
conf->r10bio_pool = mempool_create(NR_RAID10_BIOS, r10bio_pool_alloc,
r10bio_pool_free, conf);
if (!conf->r10bio_pool) {
mddev->queue->max_sectors = (PAGE_SIZE>>9);
disk->head_position = 0;
- if (!test_bit(Faulty, &rdev->flags) && test_bit(In_sync, &rdev->flags))
- conf->working_disks++;
}
- conf->raid_disks = mddev->raid_disks;
- conf->mddev = mddev;
spin_lock_init(&conf->device_lock);
INIT_LIST_HEAD(&conf->retry_list);
disk = conf->mirrors + i;
if (!disk->rdev ||
- !test_bit(In_sync, &rdev->flags)) {
+ !test_bit(In_sync, &disk->rdev->flags)) {
disk->head_position = 0;
mddev->degraded++;
}
/*
* Ok, everything is just fine now
*/
- if (conf->far_offset) {
- size = mddev->size >> (conf->chunk_shift-1);
- size *= conf->raid_disks;
- size <<= conf->chunk_shift;
- sector_div(size, conf->far_copies);
- } else
- size = conf->stride * conf->raid_disks;
- sector_div(size, conf->near_copies);
- mddev->array_size = size/2;
- mddev->resync_max_sectors = size;
+ mddev->array_size = size << (conf->chunk_shift-1);
+ mddev->resync_max_sectors = size << conf->chunk_shift;
mddev->queue->unplug_fn = raid10_unplug;
mddev->queue->issue_flush_fn = raid10_issue_flush;
+ mddev->queue->backing_dev_info.congested_fn = raid10_congested;
+ mddev->queue->backing_dev_info.congested_data = mddev;
/* Calculate max read-ahead size.
* We need to readahead at least twice a whole stripe....
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff