-menu "Macintosh device drivers"
- depends on PPC || MAC
+menuconfig MACINTOSH_DRIVERS
+ bool "Macintosh device drivers"
+ depends on PPC || MAC || X86
+ default y if (PPC_PMAC || MAC)
+ ---help---
+ Say Y here to get to see options for devices used with Macintosh
+ computers. This option alone does not add any kernel code.
+
+ If you say N, all options in this submenu will be skipped and disabled.
+
+if MACINTOSH_DRIVERS
config ADB
bool "Apple Desktop Bus (ADB) support"
this device; you should do so if your machine is one of those
mentioned above.
+config ADB_PMU_LED
+ bool "Support for the Power/iBook front LED"
+ depends on ADB_PMU
+ select NEW_LEDS
+ select LEDS_CLASS
+ help
+ Support the front LED on Power/iBooks as a generic LED that can
+ be triggered by any of the supported triggers. To get the
+ behaviour of the old CONFIG_BLK_DEV_IDE_PMAC_BLINK, select this
+ and the ide-disk LED trigger and configure appropriately through
+ sysfs.
+
+config ADB_PMU_LED_IDE
+ bool "Use front LED as IDE LED by default"
+ depends on ADB_PMU_LED
+ select LEDS_TRIGGERS
+ select LEDS_TRIGGER_IDE_DISK
+ help
+ This option makes the front LED default to the IDE trigger
+ so that it blinks on IDE activity.
+
config PMAC_SMU
bool "Support for SMU based PowerMacs"
depends on PPC_PMAC64
config PMAC_APM_EMU
tristate "APM emulation"
- depends on PPC_PMAC && PPC32 && PM
+ select APM_EMULATION
+ depends on ADB_PMU && PM && PPC32
config PMAC_MEDIABAY
bool "Support PowerBook hotswap media bay"
- depends on PPC_PMAC && PPC32
+ depends on PPC_PMAC && PPC32 && BLOCK
help
This option adds support for older PowerBook's hotswap media bay
that can contains batteries, floppy drives, or IDE devices. PCI
devices are not fully supported in the bay as I never had one to
try with
-# made a separate option since backlight may end up beeing used
-# on non-powerbook machines (but only on PMU based ones AFAIK)
config PMAC_BACKLIGHT
bool "Backlight control for LCD screens"
- depends on ADB_PMU && (BROKEN || !PPC64)
+ depends on ADB_PMU && FB = y && (BROKEN || !PPC64)
+ select FB_BACKLIGHT
+ help
+ Say Y here to enable Macintosh specific extensions of the generic
+ backlight code. With this enabled, the brightness keys on older
+ PowerBooks will be enabled so you can change the screen brightness.
+ Newer models should use a userspace daemon like pbbuttonsd.
+
+config PMAC_BACKLIGHT_LEGACY
+ bool "Provide legacy ioctl's on /dev/pmu for the backlight"
+ depends on PMAC_BACKLIGHT && (BROKEN || !PPC64)
help
- Say Y here to build in code to manage the LCD backlight on a
- Macintosh PowerBook. With this code, the backlight will be turned
- on and off appropriately on power-management and lid-open/lid-closed
- events; also, the PowerBook button device will be enabled so you can
- change the screen brightness.
+ Say Y if you want to enable legacy ioctl's on /dev/pmu. This is for
+ programs which use this old interface. New and updated programs
+ should use the backlight classes in sysfs.
config ADB_MACIO
bool "Include MacIO (CHRP) ADB driver"
If unsure, say Y.
config MAC_EMUMOUSEBTN
- bool "Support for mouse button 2+3 emulation"
- depends on INPUT_ADBHID
+ tristate "Support for mouse button 2+3 emulation"
+ depends on SYSCTL && INPUT
help
This provides generic support for emulating the 2nd and 3rd mouse
button with keypresses. If you say Y here, the emulation is still
If you have an Apple machine with a 1-button mouse, say Y here.
+ To compile this driver as a module, choose M here: the
+ module will be called mac_hid.
+
config THERM_WINDTUNNEL
tristate "Support for thermal management on Windtunnel G4s"
depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64
depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64
help
This driver provides some thermostat and fan control for the
- iBook G4, and the ATI based aluminium PowerBooks, allowing slighlty
+ iBook G4, and the ATI based aluminium PowerBooks, allowing slightly
better fan behaviour by default, and some manual control.
config THERM_PM72
which are the recent dual and quad G5 machines using the
970MP dual-core processor.
+config WINDFARM_PM121
+ tristate "Support for thermal management on PowerMac12,1"
+ depends on WINDFARM && I2C && PMAC_SMU
+ select I2C_POWERMAC
+ help
+ This driver provides thermal control for the PowerMac12,1
+ which is the iMac G5 (iSight).
+
config ANSLCD
tristate "Support for ANS LCD display"
depends on ADB_CUDA && PPC_PMAC
-endmenu
+config PMAC_RACKMETER
+ tristate "Support for Apple XServe front panel LEDs"
+ depends on PPC_PMAC
+ help
+ This driver provides some support to control the front panel
+ blue LEDs "vu-meter" of the XServer macs.
+
+endif # MACINTOSH_DRIVERS
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff