This option enables the led sysfs class in /sys/class/leds. You'll
need this to do anything useful with LEDs. If unsure, say N.
+if LEDS_CLASS
+
comment "LED drivers"
+config LEDS_88PM860X
+ tristate "LED Support for Marvell 88PM860x PMIC"
+ depends on LEDS_CLASS && MFD_88PM860X
+ help
+ This option enables support for on-chip LED drivers found on Marvell
+ Semiconductor 88PM8606 PMIC.
+
config LEDS_ATMEL_PWM
tristate "LED Support using Atmel PWM outputs"
- depends on LEDS_CLASS && ATMEL_PWM
+ depends on ATMEL_PWM
help
This option enables support for LEDs driven using outputs
of the dedicated PWM controller found on newer Atmel SOCs.
config LEDS_LOCOMO
tristate "LED Support for Locomo device"
- depends on LEDS_CLASS && SHARP_LOCOMO
+ depends on SHARP_LOCOMO
help
This option enables support for the LEDs on Sharp Locomo.
Zaurus models SL-5500 and SL-5600.
config LEDS_MIKROTIK_RB532
tristate "LED Support for Mikrotik Routerboard 532"
- depends on LEDS_CLASS && MIKROTIK_RB532
+ depends on MIKROTIK_RB532
help
This option enables support for the so called "User LED" of
Mikrotik's Routerboard 532.
config LEDS_S3C24XX
tristate "LED Support for Samsung S3C24XX GPIO LEDs"
- depends on LEDS_CLASS && ARCH_S3C2410
+ depends on ARCH_S3C2410
help
This option enables support for LEDs connected to GPIO lines
on Samsung S3C24XX series CPUs, such as the S3C2410 and S3C2440.
config LEDS_AMS_DELTA
tristate "LED Support for the Amstrad Delta (E3)"
- depends on LEDS_CLASS && MACH_AMS_DELTA
+ depends on MACH_AMS_DELTA
help
This option enables support for the LEDs on Amstrad Delta (E3).
config LEDS_NET48XX
tristate "LED Support for Soekris net48xx series Error LED"
- depends on LEDS_CLASS && SCx200_GPIO
+ depends on SCx200_GPIO
help
This option enables support for the Soekris net4801 and net4826 error
LED.
+config LEDS_NET5501
+ tristate "LED Support for Soekris net5501 series Error LED"
+ depends on LEDS_CLASS && LEDS_TRIGGERS
+ depends on LEDS_GPIO_PLATFORM && GPIO_CS5535
+ select LEDS_TRIGGER_DEFAULT_ON
+ default n
+ help
+ Add support for the Soekris net5501 board (detection, error led
+ and GPIO).
+
config LEDS_FSG
tristate "LED Support for the Freecom FSG-3"
- depends on LEDS_CLASS && MACH_FSG
+ depends on MACH_FSG
help
This option enables support for the LEDs on the Freecom FSG-3.
config LEDS_WRAP
tristate "LED Support for the WRAP series LEDs"
- depends on LEDS_CLASS && SCx200_GPIO
+ depends on SCx200_GPIO
help
This option enables support for the PCEngines WRAP programmable LEDs.
config LEDS_ALIX2
tristate "LED Support for ALIX.2 and ALIX.3 series"
- depends on LEDS_CLASS && X86 && EXPERIMENTAL
+ depends on X86 && !GPIO_CS5535 && !CS5535_GPIO
help
This option enables support for the PCEngines ALIX.2 and ALIX.3 LEDs.
You have to set leds-alix2.force=1 for boards with Award BIOS.
config LEDS_H1940
tristate "LED Support for iPAQ H1940 device"
- depends on LEDS_CLASS && ARCH_H1940
+ depends on ARCH_H1940
help
This option enables support for the LEDs on the h1940.
config LEDS_COBALT_QUBE
tristate "LED Support for the Cobalt Qube series front LED"
- depends on LEDS_CLASS && MIPS_COBALT
+ depends on MIPS_COBALT
help
This option enables support for the front LED on Cobalt Qube series
config LEDS_SUNFIRE
tristate "LED support for SunFire servers."
- depends on LEDS_CLASS && SPARC64
+ depends on SPARC64
select LEDS_TRIGGERS
help
This option enables support for the Left, Middle, and Right
config LEDS_HP6XX
tristate "LED Support for the HP Jornada 6xx"
- depends on LEDS_CLASS && SH_HP6XX
+ depends on SH_HP6XX
help
This option enables LED support for the handheld
HP Jornada 620/660/680/690.
config LEDS_PCA9532
tristate "LED driver for PCA9532 dimmer"
- depends on LEDS_CLASS && I2C && INPUT && EXPERIMENTAL
+ depends on I2C && INPUT && EXPERIMENTAL
help
This option enables support for NXP pca9532
LED controller. It is generally only useful
config LEDS_GPIO
tristate "LED Support for GPIO connected LEDs"
- depends on LEDS_CLASS && GENERIC_GPIO
+ depends on GENERIC_GPIO
help
This option enables support for the LEDs connected to GPIO
outputs. To be useful the particular board must have LEDs
config LEDS_LP3944
tristate "LED Support for N.S. LP3944 (Fun Light) I2C chip"
- depends on LEDS_CLASS && I2C
+ depends on I2C
help
This option enables support for LEDs connected to the National
Semiconductor LP3944 Lighting Management Unit (LMU) also known as
config LEDS_CLEVO_MAIL
tristate "Mail LED on Clevo notebook"
- depends on LEDS_CLASS && X86 && SERIO_I8042 && DMI
+ depends on X86 && SERIO_I8042 && DMI
help
This driver makes the mail LED accessible from userspace
programs through the leds subsystem. This LED have three
config LEDS_PCA955X
tristate "LED Support for PCA955x I2C chips"
- depends on LEDS_CLASS && I2C
+ depends on I2C
help
This option enables support for LEDs connected to PCA955x
LED driver chips accessed via the I2C bus. Supported
config LEDS_WM831X_STATUS
tristate "LED support for status LEDs on WM831x PMICs"
- depends on LEDS_CLASS && MFD_WM831X
+ depends on MFD_WM831X
help
This option enables support for the status LEDs of the WM831x
series of PMICs.
config LEDS_WM8350
tristate "LED Support for WM8350 AudioPlus PMIC"
- depends on LEDS_CLASS && MFD_WM8350
+ depends on MFD_WM8350
help
This option enables support for LEDs driven by the Wolfson
Microelectronics WM8350 AudioPlus PMIC.
config LEDS_DA903X
tristate "LED Support for DA9030/DA9034 PMIC"
- depends on LEDS_CLASS && PMIC_DA903X
+ depends on PMIC_DA903X
help
This option enables support for on-chip LED drivers found
on Dialog Semiconductor DA9030/DA9034 PMICs.
config LEDS_DAC124S085
tristate "LED Support for DAC124S085 SPI DAC"
- depends on LEDS_CLASS && SPI
+ depends on SPI
help
This option enables support for DAC124S085 SPI DAC from NatSemi,
which can be used to control up to four LEDs.
config LEDS_PWM
tristate "PWM driven LED Support"
- depends on LEDS_CLASS && HAVE_PWM
+ depends on HAVE_PWM
help
This option enables support for pwm driven LEDs
+config LEDS_REGULATOR
+ tristate "REGULATOR driven LED support"
+ depends on REGULATOR
+ help
+ This option enables support for regulator driven LEDs.
+
config LEDS_BD2802
tristate "LED driver for BD2802 RGB LED"
- depends on LEDS_CLASS && I2C
+ depends on I2C
help
This option enables support for BD2802GU RGB LED driver chips
accessed via the I2C bus.
config LEDS_INTEL_SS4200
tristate "LED driver for Intel NAS SS4200 series"
- depends on LEDS_CLASS && PCI && DMI
+ depends on PCI && DMI
help
This option enables support for the Intel SS4200 series of
Network Attached Storage servers. You may control the hard
drive or power LEDs on the front panel. Using this driver
can stop the front LED from blinking after startup.
-comment "LED Triggers"
+config LEDS_LT3593
+ tristate "LED driver for LT3593 controllers"
+ depends on GENERIC_GPIO
+ help
+ This option enables support for LEDs driven by a Linear Technology
+ LT3593 controller. This controller uses a special one-wire pulse
+ coding protocol to set the brightness.
+
+config LEDS_ADP5520
+ tristate "LED Support for ADP5520/ADP5501 PMIC"
+ depends on PMIC_ADP5520
+ help
+ This option enables support for on-chip LED drivers found
+ on Analog Devices ADP5520/ADP5501 PMICs.
+
+ To compile this driver as a module, choose M here: the module will
+ be called leds-adp5520.
+
+config LEDS_DELL_NETBOOKS
+ tristate "External LED on Dell Business Netbooks"
+ depends on X86 && ACPI_WMI
+ help
+ This adds support for the Latitude 2100 and similar
+ notebooks that have an external LED.
+
+config LEDS_MC13783
+ tristate "LED Support for MC13783 PMIC"
+ depends on MFD_MC13783
+ help
+ This option enable support for on-chip LED drivers found
+ on Freescale Semiconductor MC13783 PMIC.
config LEDS_TRIGGERS
bool "LED Trigger support"
These triggers allow kernel events to drive the LEDs and can
be configured via sysfs. If unsure, say Y.
+if LEDS_TRIGGERS
+
+comment "LED Triggers"
+
config LEDS_TRIGGER_TIMER
tristate "LED Timer Trigger"
- depends on LEDS_TRIGGERS
help
This allows LEDs to be controlled by a programmable timer
via sysfs. Some LED hardware can be programmed to start
config LEDS_TRIGGER_IDE_DISK
bool "LED IDE Disk Trigger"
- depends on LEDS_TRIGGERS && IDE_GD_ATA
+ depends on IDE_GD_ATA
help
This allows LEDs to be controlled by IDE disk activity.
If unsure, say Y.
config LEDS_TRIGGER_HEARTBEAT
tristate "LED Heartbeat Trigger"
- depends on LEDS_TRIGGERS
help
This allows LEDs to be controlled by a CPU load average.
The flash frequency is a hyperbolic function of the 1-minute
config LEDS_TRIGGER_BACKLIGHT
tristate "LED backlight Trigger"
- depends on LEDS_TRIGGERS
help
This allows LEDs to be controlled as a backlight device: they
turn off and on when the display is blanked and unblanked.
config LEDS_TRIGGER_GPIO
tristate "LED GPIO Trigger"
- depends on LEDS_TRIGGERS
depends on GPIOLIB
help
This allows LEDs to be controlled by gpio events. It's good
config LEDS_TRIGGER_DEFAULT_ON
tristate "LED Default ON Trigger"
- depends on LEDS_TRIGGERS
help
This allows LEDs to be initialised in the ON state.
If unsure, say Y.
comment "iptables trigger is under Netfilter config (LED target)"
depends on LEDS_TRIGGERS
+endif # LEDS_TRIGGERS
+
+endif # LEDS_CLASS
+
endif # NEW_LEDS
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff