bas_gigaset: correctly allocate USB interrupt transfer buffer

[safe/jmp/linux-2.6] / drivers / isdn / hisax / bkm_a8.c

diff --git a/drivers/isdn/hisax/bkm_a8.c b/drivers/isdn/hisax/bkm_a8.c
index 99ef3b4..e1ff471 100644 (file)
--- a/drivers/isdn/hisax/bkm_a8.c
+++ b/drivers/isdn/hisax/bkm_a8.c
@@ -22,8 +22,6 @@
 
 #define        ATTEMPT_PCI_REMAPPING   /* Required for PLX rev 1 */
 
-extern const char *CardType[];
-
 static const char sct_quadro_revision[] = "$Revision: 1.22.2.4 $";
 
 static const char *sct_quadro_subtypes[] =
@@ -181,8 +179,7 @@ bkm_interrupt_ipac(int intno, void *dev_id)
                goto Start_IPAC;
        }
        if (!icnt)
-               printk(KERN_WARNING "HiSax: %s (%s) IRQ LOOP\n",
-                      CardType[cs->typ],
+               printk(KERN_WARNING "HiSax: Scitel Quadro (%s) IRQ LOOP\n",
                       sct_quadro_subtypes[cs->subtyp]);
        writereg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_MASK, 0xFF);
        writereg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_MASK, 0xC0);
@@ -296,8 +293,8 @@ setup_sct_quadro(struct IsdnCard *card)
        if (card->para[0] >= SCT_1 && card->para[0] <= SCT_4)
                cs->subtyp = card->para[0];
        else {
-               printk(KERN_WARNING "HiSax: %s: Invalid subcontroller in configuration, default to 1\n",
-                       CardType[card->typ]);
+               printk(KERN_WARNING "HiSax: Scitel Quadro: Invalid "
+                      "subcontroller in configuration, default to 1\n");
                return (0);
        }
        if ((cs->subtyp != SCT_1) && ((sub_sys_id != PCI_DEVICE_ID_BERKOM_SCITEL_QUADRO) ||
@@ -322,16 +319,16 @@ setup_sct_quadro(struct IsdnCard *card)
                        }
                }
                if (!found) {
-                       printk(KERN_WARNING "HiSax: %s (%s): Card not found\n",
-                               CardType[card->typ],
+                       printk(KERN_WARNING "HiSax: Scitel Quadro (%s): "
+                               "Card not found\n",
                                sct_quadro_subtypes[cs->subtyp]);
                        return (0);
                }
 #ifdef ATTEMPT_PCI_REMAPPING
 /* HACK: PLX revision 1 bug: PLX address bit 7 must not be set */
                if ((pci_ioaddr1 & 0x80) && (dev_a8->revision == 1)) {
-                       printk(KERN_WARNING "HiSax: %s (%s): PLX rev 1, remapping required!\n",
-                               CardType[card->typ],
+                       printk(KERN_WARNING "HiSax: Scitel Quadro (%s): "
+                               "PLX rev 1, remapping required!\n",
                                sct_quadro_subtypes[cs->subtyp]);
                        /* Restart PCI negotiation */
                        pci_write_config_dword(dev_a8, PCI_BASE_ADDRESS_1, (u_int) - 1);
@@ -344,8 +341,7 @@ setup_sct_quadro(struct IsdnCard *card)
 #endif /* End HACK */
        }
        if (!pci_irq) {         /* IRQ range check ?? */
-               printk(KERN_WARNING "HiSax: %s (%s): No IRQ\n",
-                      CardType[card->typ],
+               printk(KERN_WARNING "HiSax: Scitel Quadro (%s): No IRQ\n",
                       sct_quadro_subtypes[cs->subtyp]);
                return (0);
        }
@@ -355,8 +351,8 @@ setup_sct_quadro(struct IsdnCard *card)
        pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_4, &pci_ioaddr4);
        pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_5, &pci_ioaddr5);
        if (!pci_ioaddr1 || !pci_ioaddr2 || !pci_ioaddr3 || !pci_ioaddr4 || !pci_ioaddr5) {
-               printk(KERN_WARNING "HiSax: %s (%s): No IO base address(es)\n",
-                      CardType[card->typ],
+               printk(KERN_WARNING "HiSax: Scitel Quadro (%s): "
+                      "No IO base address(es)\n",
                       sct_quadro_subtypes[cs->subtyp]);
                return (0);
        }
@@ -411,8 +407,8 @@ setup_sct_quadro(struct IsdnCard *card)
        /* For isac and hscx data path */
        cs->hw.ax.data_adr = cs->hw.ax.base + 4;
 
-       printk(KERN_INFO "HiSax: %s (%s) configured at 0x%.4lX, 0x%.4lX, 0x%.4lX and IRQ %d\n",
-              CardType[card->typ],
+       printk(KERN_INFO "HiSax: Scitel Quadro (%s) configured at "
+              "0x%.4lX, 0x%.4lX, 0x%.4lX and IRQ %d\n",
               sct_quadro_subtypes[cs->subtyp],
               cs->hw.ax.plx_adr,
               cs->hw.ax.base,
@@ -432,8 +428,7 @@ setup_sct_quadro(struct IsdnCard *card)
        cs->cardmsg = &BKM_card_msg;
        cs->irq_func = &bkm_interrupt_ipac;
 
-       printk(KERN_INFO "HiSax: %s (%s): IPAC Version %d\n",
-               CardType[card->typ],
+       printk(KERN_INFO "HiSax: Scitel Quadro (%s): IPAC Version %d\n",
                sct_quadro_subtypes[cs->subtyp],
                readreg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_ID));
        return (1);