#ifndef GIGASET_H
#define GIGASET_H
+/* define global prefix for pr_ macros in linux/kernel.h */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/compiler.h>
#include <linux/types.h>
+#include <linux/slab.h>
#include <linux/spinlock.h>
-#include <linux/isdnif.h>
#include <linux/usb.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
#include <linux/list.h>
#include <asm/atomic.h>
-#define GIG_VERSION {0,5,0,0}
-#define GIG_COMPAT {0,4,0,0}
+#define GIG_VERSION {0, 5, 0, 0}
+#define GIG_COMPAT {0, 4, 0, 0}
#define MAX_REC_PARAMS 10 /* Max. number of params in response string */
-#define MAX_RESP_SIZE 512 /* Max. size of a response string */
-#define HW_HDR_LEN 2 /* Header size used to store ack info */
+#define MAX_RESP_SIZE 511 /* Max. size of a response string */
#define MAX_EVENTS 64 /* size of event queue */
extern int gigaset_debuglevel; /* "needs" cast to (enum debuglevel) */
-/* any combination of these can be given with the 'debug=' parameter to insmod,
- * e.g. 'insmod usb_gigaset.o debug=0x2c' will set DEBUG_OPEN, DEBUG_CMD and
- * DEBUG_INTR.
- */
+/* debug flags, combine by adding/bitwise OR */
enum debuglevel {
- DEBUG_REG = 0x0002, /* serial port I/O register operations */
- DEBUG_OPEN = 0x0004, /* open/close serial port */
- DEBUG_INTR = 0x0008, /* interrupt processing */
- DEBUG_INTR_DUMP = 0x0010, /* Activating hexdump debug output on
- interrupt requests, not available as
- run-time option */
+ DEBUG_INTR = 0x00008, /* interrupt processing */
DEBUG_CMD = 0x00020, /* sent/received LL commands */
DEBUG_STREAM = 0x00040, /* application data stream I/O events */
DEBUG_STREAM_DUMP = 0x00080, /* application data stream content */
DEBUG_LLDATA = 0x00100, /* sent/received LL data */
- DEBUG_INTR_0 = 0x00200, /* serial port interrupt processing */
+ DEBUG_EVENT = 0x00200, /* event processing */
DEBUG_DRIVER = 0x00400, /* driver structure */
DEBUG_HDLC = 0x00800, /* M10x HDLC processing */
- DEBUG_WRITE = 0x01000, /* M105 data write */
+ DEBUG_CHANNEL = 0x01000, /* channel allocation/deallocation */
DEBUG_TRANSCMD = 0x02000, /* AT-COMMANDS+RESPONSES */
DEBUG_MCMD = 0x04000, /* COMMANDS THAT ARE SENT VERY OFTEN */
DEBUG_INIT = 0x08000, /* (de)allocation+initialization of data
structures */
- DEBUG_LOCK = 0x10000, /* semaphore operations */
+ DEBUG_SUSPEND = 0x10000, /* suspend/resume processing */
DEBUG_OUTPUT = 0x20000, /* output to device */
DEBUG_ISO = 0x40000, /* isochronous transfers */
DEBUG_IF = 0x80000, /* character device operations */
activated */
};
-/* missing from linux/device.h ... */
-#ifndef dev_notice
-#define dev_notice(dev, format, arg...) \
- dev_printk(KERN_NOTICE , dev , format , ## arg)
-#endif
-
-/* Kernel message macros for situations where dev_printk and friends cannot be
- * used for lack of reliable access to a device structure.
- * linux/usb.h already contains these but in an obsolete form which clutters
- * the log needlessly, and according to the USB maintainer those should be
- * removed rather than fixed anyway.
- */
-#undef err
-#undef info
-#undef warn
-#undef notice
-
-#define err(format, arg...) printk(KERN_ERR KBUILD_MODNAME ": " \
- format "\n" , ## arg)
-#define info(format, arg...) printk(KERN_INFO KBUILD_MODNAME ": " \
- format "\n" , ## arg)
-#define warn(format, arg...) printk(KERN_WARNING KBUILD_MODNAME ": " \
- format "\n" , ## arg)
-#define notice(format, arg...) printk(KERN_NOTICE KBUILD_MODNAME ": " \
- format "\n" , ## arg)
-
#ifdef CONFIG_GIGASET_DEBUG
#define gig_dbg(level, format, arg...) \
#define OUT_VENDOR_REQ (USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT)
#define IN_VENDOR_REQ (USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT)
-/* int-in-events 3070 */
+/* interrupt pipe messages */
#define HD_B1_FLOW_CONTROL 0x80
#define HD_B2_FLOW_CONTROL 0x81
-#define HD_RECEIVEATDATA_ACK (0x35) // 3070
- // att: HD_RECEIVE>>AT<<DATA_ACK
-#define HD_READY_SEND_ATDATA (0x36) // 3070
-#define HD_OPEN_ATCHANNEL_ACK (0x37) // 3070
-#define HD_CLOSE_ATCHANNEL_ACK (0x38) // 3070
-#define HD_DEVICE_INIT_OK (0x11) // ISurf USB + 3070
-#define HD_OPEN_B1CHANNEL_ACK (0x51) // ISurf USB + 3070
-#define HD_OPEN_B2CHANNEL_ACK (0x52) // ISurf USB + 3070
-#define HD_CLOSE_B1CHANNEL_ACK (0x53) // ISurf USB + 3070
-#define HD_CLOSE_B2CHANNEL_ACK (0x54) // ISurf USB + 3070
-// Powermangment
-#define HD_SUSPEND_END (0x61) // ISurf USB
-// Configuration
-#define HD_RESET_INTERRUPT_PIPE_ACK (0xFF) // ISurf USB + 3070
-
-/* control requests 3070 */
-#define HD_OPEN_B1CHANNEL (0x23) // ISurf USB + 3070
-#define HD_CLOSE_B1CHANNEL (0x24) // ISurf USB + 3070
-#define HD_OPEN_B2CHANNEL (0x25) // ISurf USB + 3070
-#define HD_CLOSE_B2CHANNEL (0x26) // ISurf USB + 3070
-#define HD_RESET_INTERRUPT_PIPE (0x27) // ISurf USB + 3070
-#define HD_DEVICE_INIT_ACK (0x34) // ISurf USB + 3070
-#define HD_WRITE_ATMESSAGE (0x12) // 3070
-#define HD_READ_ATMESSAGE (0x13) // 3070
-#define HD_OPEN_ATCHANNEL (0x28) // 3070
-#define HD_CLOSE_ATCHANNEL (0x29) // 3070
+#define HD_RECEIVEATDATA_ACK (0x35) /* 3070 */
+#define HD_READY_SEND_ATDATA (0x36) /* 3070 */
+#define HD_OPEN_ATCHANNEL_ACK (0x37) /* 3070 */
+#define HD_CLOSE_ATCHANNEL_ACK (0x38) /* 3070 */
+#define HD_DEVICE_INIT_OK (0x11) /* ISurf USB + 3070 */
+#define HD_OPEN_B1CHANNEL_ACK (0x51) /* ISurf USB + 3070 */
+#define HD_OPEN_B2CHANNEL_ACK (0x52) /* ISurf USB + 3070 */
+#define HD_CLOSE_B1CHANNEL_ACK (0x53) /* ISurf USB + 3070 */
+#define HD_CLOSE_B2CHANNEL_ACK (0x54) /* ISurf USB + 3070 */
+#define HD_SUSPEND_END (0x61) /* ISurf USB */
+#define HD_RESET_INTERRUPT_PIPE_ACK (0xFF) /* ISurf USB + 3070 */
+
+/* control requests */
+#define HD_OPEN_B1CHANNEL (0x23) /* ISurf USB + 3070 */
+#define HD_CLOSE_B1CHANNEL (0x24) /* ISurf USB + 3070 */
+#define HD_OPEN_B2CHANNEL (0x25) /* ISurf USB + 3070 */
+#define HD_CLOSE_B2CHANNEL (0x26) /* ISurf USB + 3070 */
+#define HD_RESET_INTERRUPT_PIPE (0x27) /* ISurf USB + 3070 */
+#define HD_DEVICE_INIT_ACK (0x34) /* ISurf USB + 3070 */
+#define HD_WRITE_ATMESSAGE (0x12) /* 3070 */
+#define HD_READ_ATMESSAGE (0x13) /* 3070 */
+#define HD_OPEN_ATCHANNEL (0x28) /* 3070 */
+#define HD_CLOSE_ATCHANNEL (0x29) /* 3070 */
+
+/* number of B channels supported by base driver */
+#define BAS_CHANNELS 2
/* USB frames for isochronous transfer */
#define BAS_FRAMETIME 1 /* number of milliseconds between frames */
#define AT_PROTO 4
#define AT_TYPE 5
#define AT_HLC 6
-#define AT_NUM 7
+#define AT_CLIP 7
+/* total number */
+#define AT_NUM 8
/* variables in struct at_state_t */
#define VAR_ZSAU 0
#define EV_START -110
#define EV_STOP -111
#define EV_IF_LOCK -112
-#define EV_PROTO_L2 -113
#define EV_ACCEPT -114
#define EV_DIAL -115
#define EV_HUP -116
#define EV_BC_CLOSED -118
/* input state */
-#define INS_command 0x0001
-#define INS_DLE_char 0x0002
+#define INS_command 0x0001 /* receiving messages (not payload data) */
+#define INS_DLE_char 0x0002 /* DLE flag received (in DLE mode) */
#define INS_byte_stuff 0x0004
#define INS_have_data 0x0008
-#define INS_skip_frame 0x0010
-#define INS_DLE_command 0x0020
+#define INS_DLE_command 0x0020 /* DLE message start (<DLE> X) received */
#define INS_flag_hunt 0x0040
/* channel state */
#define SM_LOCKED 0
#define SM_ISDN 1 /* default */
+/* layer 2 protocols (AT^SBPR=...) */
+#define L2_BITSYNC 0
+#define L2_HDLC 1
+#define L2_VOICE 2
+
struct gigaset_ops;
struct gigaset_driver;
char *command; /* NULL==none */
};
-extern struct reply_t gigaset_tab_cid_m10x[];
-extern struct reply_t gigaset_tab_nocid_m10x[];
+extern struct reply_t gigaset_tab_cid[];
+extern struct reply_t gigaset_tab_nocid[];
struct inbuf_t {
- unsigned char *rcvbuf; /* usb-gigaset receive buffer */
- struct bc_state *bcs;
struct cardstate *cs;
int inputstate;
- atomic_t head, tail;
+ int head, tail;
unsigned char data[RBUFSIZE];
};
* are also filled with that value
*/
struct isowbuf_t {
- atomic_t read;
- atomic_t nextread;
- atomic_t write;
+ int read;
+ int nextread;
+ int write;
atomic_t writesem;
int wbits;
unsigned char data[BAS_OUTBUFSIZE + BAS_OUTBUFPAD];
* - urb: pointer to the URB itself
* - bcs: pointer to the B Channel control structure
* - limit: end of write buffer area covered by this URB
+ * - status: URB completion status
*/
struct isow_urbctx_t {
struct urb *urb;
struct bc_state *bcs;
int limit;
+ int status;
};
/* AT state structure
struct bc_state *bcs;
};
-struct resp_type_t {
- unsigned char *response;
- int resp_code; /* RSP_XXXX */
- int type; /* RT_XXXX */
-};
-
struct event_t {
int type;
void *ptr, *arg;
int trans_up; /* Counter of packages (upstream) */
struct at_state_t at_state;
- unsigned long rcvbytes;
__u16 fcs;
struct sk_buff *skb;
unsigned chstate; /* bitmap (CHS_*) */
int ignore;
- unsigned proto2; /* Layer 2 protocol (ISDN_PROTO_L2_*) */
+ unsigned proto2; /* layer 2 protocol (L2_*) */
char *commands[AT_NUM]; /* see AT_XXXX */
#ifdef CONFIG_GIGASET_DEBUG
struct usb_bc_state *usb; /* usb hardware driver (m105) */
struct bas_bc_state *bas; /* usb hardware driver (base) */
} hw;
+
+ void *ap; /* LL application structure */
};
struct cardstate {
unsigned minor_index;
struct device *dev;
struct device *tty_dev;
+ unsigned flags;
const struct gigaset_ops *ops;
/* Stuff to handle communication */
wait_queue_head_t waitqueue;
int waiting;
- atomic_t mode; /* see M_XXXX */
- atomic_t mstate; /* Modem state: see MS_XXXX */
+ int mode; /* see M_XXXX */
+ int mstate; /* Modem state: see MS_XXXX */
/* only changed by the event layer */
int cmd_result;
unsigned running; /* !=0 if events are handled */
unsigned connected; /* !=0 if hardware is connected */
- unsigned isdn_up; /* !=0 after ISDN_STAT_RUN */
+ unsigned isdn_up; /* !=0 after gigaset_isdn_start() */
unsigned cidmode;
int myid; /* id for communication with LL */
- isdn_if iif;
+ void *iif; /* LL interface structure */
+ unsigned short hw_hdr_len; /* headroom needed in data skbs */
struct reply_t *tabnocid;
struct reply_t *tabcid;
struct timer_list timer;
int retry_count;
- int dle; /* !=0 if modem commands/responses are
- dle encoded */
+ int dle; /* !=0 if DLE mode is active
+ (ZDLE=1 received -- M10x only) */
int cur_at_seq; /* sequence of AT commands being
processed */
int curchannel; /* channel those commands are meant
for */
- atomic_t commands_pending; /* flag(s) in xxx.commands_pending have
+ int commands_pending; /* flag(s) in xxx.commands_pending have
been set */
struct tasklet_struct event_tasklet;
/* tasklet for serializing AT commands.
spinlock_t ev_lock;
/* current modem response */
- unsigned char respdata[MAX_RESP_SIZE];
+ unsigned char respdata[MAX_RESP_SIZE+1];
unsigned cbytes;
/* private data of hardware drivers */
unsigned minor;
unsigned minors;
struct cardstate *cs;
- unsigned *flags;
int blocked;
const struct gigaset_ops *ops;
struct bas_bc_state {
/* isochronous output state */
- atomic_t running;
+ int running;
atomic_t corrbytes;
spinlock_t isooutlock;
struct isow_urbctx_t isoouturbs[BAS_OUTURBS];
struct urb *isoinurbs[BAS_INURBS];
unsigned char isoinbuf[BAS_INBUFSIZE * BAS_INURBS];
struct urb *isoindone; /* completed isoc read URB */
+ int isoinstatus; /* status of completed URB */
int loststatus; /* status of dropped URB */
unsigned isoinlost; /* number of bytes lost */
/* state of bit unstuffing algorithm
int (*baud_rate)(struct cardstate *cs, unsigned cflag);
int (*set_line_ctrl)(struct cardstate *cs, unsigned cflag);
- /* Called from i4l.c to put an skb into the send-queue. */
+ /* Called from LL interface to put an skb into the send-queue.
+ * After sending is completed, gigaset_skb_sent() must be called
+ * with the skb's link layer header preserved. */
int (*send_skb)(struct bc_state *bcs, struct sk_buff *skb);
/* Called from ev-layer.c to process a block of data
};
-/* = Common structures and definitions ======================================= */
+/* = Common structures and definitions =======================================
+ */
/* Parser states for DLE-Event:
* <DLE-EVENT>: <DLE_FLAG> "X" <EVENT> <DLE_FLAG> "."
* Functions implemented in asyncdata.c
*/
-/* Called from i4l.c to put an skb into the send-queue.
- * After sending gigaset_skb_sent() should be called. */
+/* Called from LL interface to put an skb into the send queue. */
int gigaset_m10x_send_skb(struct bc_state *bcs, struct sk_buff *skb);
/* Called from ev-layer.c to process a block of data
* Functions implemented in isocdata.c
*/
-/* Called from i4l.c to put an skb into the send-queue.
- * After sending gigaset_skb_sent() should be called. */
+/* Called from LL interface to put an skb into the send queue. */
int gigaset_isoc_send_skb(struct bc_state *bcs, struct sk_buff *skb);
/* Called from ev-layer.c to process a block of data
int gigaset_isowbuf_getbytes(struct isowbuf_t *iwb, int size);
/* ===========================================================================
- * Functions implemented in i4l.c/gigaset.h
+ * Functions implemented in LL interface
*/
-/* Called by gigaset_initcs() for setting up with the isdn4linux subsystem */
-int gigaset_register_to_LL(struct cardstate *cs, const char *isdnid);
+/* Called from common.c for setting up/shutting down with the ISDN subsystem */
+void gigaset_isdn_regdrv(void);
+void gigaset_isdn_unregdrv(void);
+int gigaset_isdn_regdev(struct cardstate *cs, const char *isdnid);
+void gigaset_isdn_unregdev(struct cardstate *cs);
-/* Called from xxx-gigaset.c to indicate completion of sending an skb */
+/* Called from hardware module to indicate completion of an skb */
void gigaset_skb_sent(struct bc_state *bcs, struct sk_buff *skb);
+void gigaset_skb_rcvd(struct bc_state *bcs, struct sk_buff *skb);
+void gigaset_isdn_rcv_err(struct bc_state *bcs);
/* Called from common.c/ev-layer.c to indicate events relevant to the LL */
+void gigaset_isdn_start(struct cardstate *cs);
+void gigaset_isdn_stop(struct cardstate *cs);
int gigaset_isdn_icall(struct at_state_t *at_state);
-int gigaset_isdn_setup_accept(struct at_state_t *at_state);
-int gigaset_isdn_setup_dial(struct at_state_t *at_state, void *data);
-
-void gigaset_i4l_cmd(struct cardstate *cs, int cmd);
-void gigaset_i4l_channel_cmd(struct bc_state *bcs, int cmd);
-
-
-static inline void gigaset_isdn_rcv_err(struct bc_state *bcs)
-{
- isdn_ctrl response;
-
- /* error -> LL */
- gig_dbg(DEBUG_CMD, "sending L1ERR");
- response.driver = bcs->cs->myid;
- response.command = ISDN_STAT_L1ERR;
- response.arg = bcs->channel;
- response.parm.errcode = ISDN_STAT_L1ERR_RECV;
- bcs->cs->iif.statcallb(&response);
-}
+void gigaset_isdn_connD(struct bc_state *bcs);
+void gigaset_isdn_hupD(struct bc_state *bcs);
+void gigaset_isdn_connB(struct bc_state *bcs);
+void gigaset_isdn_hupB(struct bc_state *bcs);
/* ===========================================================================
* Functions implemented in ev-layer.c
void gigaset_at_init(struct at_state_t *at_state, struct bc_state *bcs,
struct cardstate *cs, int cid);
int gigaset_get_channel(struct bc_state *bcs);
+struct bc_state *gigaset_get_free_channel(struct cardstate *cs);
void gigaset_free_channel(struct bc_state *bcs);
int gigaset_get_channels(struct cardstate *cs);
void gigaset_free_channels(struct cardstate *cs);
void gigaset_debugdrivers(void);
struct cardstate *gigaset_get_cs_by_tty(struct tty_struct *tty);
struct cardstate *gigaset_get_cs_by_id(int id);
-
-/* For drivers without fixed assignment device<->cardstate (usb) */
-struct cardstate *gigaset_getunassignedcs(struct gigaset_driver *drv);
-void gigaset_unassign(struct cardstate *cs);
void gigaset_blockdriver(struct gigaset_driver *drv);
/* Allocate and initialize card state. Calls hardware dependent
void gigaset_stop(struct cardstate *cs);
/* Tell common.c that the driver is being unloaded. */
-void gigaset_shutdown(struct cardstate *cs);
+int gigaset_shutdown(struct cardstate *cs);
/* Tell common.c that an skb has been sent. */
void gigaset_skb_sent(struct bc_state *bcs, struct sk_buff *skb);
void *ptr, int parameter, void *arg);
/* Called on CONFIG1 command from frontend. */
-int gigaset_enterconfigmode(struct cardstate *cs); //0: success <0: errorcode
+int gigaset_enterconfigmode(struct cardstate *cs);
/* cs->lock must not be locked */
static inline void gigaset_schedule_event(struct cardstate *cs)
static inline void gigaset_bchannel_down(struct bc_state *bcs)
{
gigaset_add_event(bcs->cs, &bcs->at_state, EV_BC_CLOSED, NULL, 0, NULL);
-
- gig_dbg(DEBUG_CMD, "scheduling BC_CLOSED");
gigaset_schedule_event(bcs->cs);
}
static inline void gigaset_bchannel_up(struct bc_state *bcs)
{
gigaset_add_event(bcs->cs, &bcs->at_state, EV_BC_OPEN, NULL, 0, NULL);
-
- gig_dbg(DEBUG_CMD, "scheduling BC_OPEN");
gigaset_schedule_event(bcs->cs);
}
/* handling routines for sk_buff */
/* ============================= */
-/* pass received skb to LL
- * Warning: skb must not be accessed anymore!
- */
-static inline void gigaset_rcv_skb(struct sk_buff *skb,
- struct cardstate *cs,
- struct bc_state *bcs)
-{
- cs->iif.rcvcallb_skb(cs->myid, bcs->channel, skb);
- bcs->trans_down++;
-}
-
-/* handle reception of corrupted skb
- * Warning: skb must not be accessed anymore!
- */
-static inline void gigaset_rcv_error(struct sk_buff *procskb,
- struct cardstate *cs,
- struct bc_state *bcs)
-{
- if (procskb)
- dev_kfree_skb(procskb);
-
- if (bcs->ignore)
- --bcs->ignore;
- else {
- ++bcs->corrupted;
- gigaset_isdn_rcv_err(bcs);
- }
-}
-
-
-/* bitwise byte inversion table */
-extern __u8 gigaset_invtab[]; /* in common.c */
-
/* append received bytes to inbuf */
int gigaset_fill_inbuf(struct inbuf_t *inbuf, const unsigned char *src,
unsigned numbytes);
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff