* - IdealTEK URTC1000
* - General Touch
* - GoTop Super_Q2/GogoPen/PenPower tablets
+ * - JASTEC USB touch controller/DigiTech DTR-02U
+ * - Zytronic capacitive touchscreen
*
* Copyright (C) 2004-2007 by Daniel Ritz <daniel.ritz@gmx.ch>
* Copyright (C) by Todd E. Johnson (mtouchusb.c)
int min_press, max_press;
int rept_size;
+ /*
+ * Always service the USB devices irq not just when the input device is
+ * open. This is useful when devices have a watchdog which prevents us
+ * from periodically polling the device. Leave this unset unless your
+ * touchscreen device requires it, as it does consume more of the USB
+ * bandwidth.
+ */
+ bool irq_always;
+
void (*process_pkt) (struct usbtouch_usb *usbtouch, unsigned char *pkt, int len);
/*
DEVTYPE_IDEALTEK,
DEVTYPE_GENERAL_TOUCH,
DEVTYPE_GOTOP,
+ DEVTYPE_JASTEC,
+ DEVTYPE_E2I,
+ DEVTYPE_ZYTRONIC,
+ DEVTYPE_TC5UH,
};
#define USB_DEVICE_HID_CLASS(vend, prod) \
.match_flags = USB_DEVICE_ID_MATCH_INT_CLASS \
+ | USB_DEVICE_ID_MATCH_INT_PROTOCOL \
| USB_DEVICE_ID_MATCH_DEVICE, \
.idVendor = (vend), \
.idProduct = (prod), \
{USB_DEVICE(0x08f2, 0x00f4), .driver_info = DEVTYPE_GOTOP},
#endif
+#ifdef CONFIG_TOUCHSCREEN_USB_JASTEC
+ {USB_DEVICE(0x0f92, 0x0001), .driver_info = DEVTYPE_JASTEC},
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_E2I
+ {USB_DEVICE(0x1ac7, 0x0001), .driver_info = DEVTYPE_E2I},
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_ZYTRONIC
+ {USB_DEVICE(0x14c8, 0x0003), .driver_info = DEVTYPE_ZYTRONIC},
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_ETT_TC5UH
+ {USB_DEVICE(0x0664, 0x0309), .driver_info = DEVTYPE_TC5UH},
+#endif
+
{}
};
/*****************************************************************************
+ * e2i Part
+ */
+
+#ifdef CONFIG_TOUCHSCREEN_USB_E2I
+static int e2i_init(struct usbtouch_usb *usbtouch)
+{
+ int ret;
+
+ ret = usb_control_msg(usbtouch->udev, usb_rcvctrlpipe(usbtouch->udev, 0),
+ 0x01, 0x02, 0x0000, 0x0081,
+ NULL, 0, USB_CTRL_SET_TIMEOUT);
+
+ dbg("%s - usb_control_msg - E2I_RESET - bytes|err: %d",
+ __func__, ret);
+ return ret;
+}
+
+static int e2i_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+ int tmp = (pkt[0] << 8) | pkt[1];
+ dev->x = (pkt[2] << 8) | pkt[3];
+ dev->y = (pkt[4] << 8) | pkt[5];
+
+ tmp = tmp - 0xA000;
+ dev->touch = (tmp > 0);
+ dev->press = (tmp > 0 ? tmp : 0);
+
+ return 1;
+}
+#endif
+
+
+/*****************************************************************************
* eGalax part
*/
}
#endif
+/*****************************************************************************
+ * ET&T TC5UH part
+ */
+#ifdef CONFIG_TOUCHSCREEN_USB_ETT_TC5UH
+static int tc5uh_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+ dev->x = ((pkt[2] & 0x0F) << 8) | pkt[1];
+ dev->y = ((pkt[4] & 0x0F) << 8) | pkt[3];
+ dev->touch = pkt[0] & 0x01;
+
+ return 1;
+}
+#endif
/*****************************************************************************
* IdealTEK URTC1000 Part
#ifdef CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH
static int general_touch_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
- dev->x = ((pkt[2] & 0x0F) << 8) | pkt[1] ;
- dev->y = ((pkt[4] & 0x0F) << 8) | pkt[3] ;
+ dev->x = (pkt[2] << 8) | pkt[1];
+ dev->y = (pkt[4] << 8) | pkt[3];
dev->press = pkt[5] & 0xff;
dev->touch = pkt[0] & 0x01;
dev->x = ((pkt[1] & 0x38) << 4) | pkt[2];
dev->y = ((pkt[1] & 0x07) << 7) | pkt[3];
dev->touch = pkt[0] & 0x01;
+
+ return 1;
+}
+#endif
+
+/*****************************************************************************
+ * JASTEC Part
+ */
+#ifdef CONFIG_TOUCHSCREEN_USB_JASTEC
+static int jastec_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+ dev->x = ((pkt[0] & 0x3f) << 6) | (pkt[2] & 0x3f);
+ dev->y = ((pkt[1] & 0x3f) << 6) | (pkt[3] & 0x3f);
+ dev->touch = (pkt[0] & 0x40) >> 6;
+
return 1;
}
#endif
+/*****************************************************************************
+ * Zytronic Part
+ */
+#ifdef CONFIG_TOUCHSCREEN_USB_ZYTRONIC
+static int zytronic_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+ switch (pkt[0]) {
+ case 0x3A: /* command response */
+ dbg("%s: Command response %d", __func__, pkt[1]);
+ break;
+
+ case 0xC0: /* down */
+ dev->x = (pkt[1] & 0x7f) | ((pkt[2] & 0x07) << 7);
+ dev->y = (pkt[3] & 0x7f) | ((pkt[4] & 0x07) << 7);
+ dev->touch = 1;
+ dbg("%s: down %d,%d", __func__, dev->x, dev->y);
+ return 1;
+
+ case 0x80: /* up */
+ dev->x = (pkt[1] & 0x7f) | ((pkt[2] & 0x07) << 7);
+ dev->y = (pkt[3] & 0x7f) | ((pkt[4] & 0x07) << 7);
+ dev->touch = 0;
+ dbg("%s: up %d,%d", __func__, dev->x, dev->y);
+ return 1;
+
+ default:
+ dbg("%s: Unknown return %d", __func__, pkt[0]);
+ break;
+ }
+
+ return 0;
+}
+#endif
/*****************************************************************************
* the different device descriptors
#ifdef CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH
[DEVTYPE_GENERAL_TOUCH] = {
.min_xc = 0x0,
- .max_xc = 0x0500,
+ .max_xc = 0x7fff,
.min_yc = 0x0,
- .max_yc = 0x0500,
+ .max_yc = 0x7fff,
.rept_size = 7,
.read_data = general_touch_read_data,
},
.read_data = gotop_read_data,
},
#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_JASTEC
+ [DEVTYPE_JASTEC] = {
+ .min_xc = 0x0,
+ .max_xc = 0x0fff,
+ .min_yc = 0x0,
+ .max_yc = 0x0fff,
+ .rept_size = 4,
+ .read_data = jastec_read_data,
+ },
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_E2I
+ [DEVTYPE_E2I] = {
+ .min_xc = 0x0,
+ .max_xc = 0x7fff,
+ .min_yc = 0x0,
+ .max_yc = 0x7fff,
+ .rept_size = 6,
+ .init = e2i_init,
+ .read_data = e2i_read_data,
+ },
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_ZYTRONIC
+ [DEVTYPE_ZYTRONIC] = {
+ .min_xc = 0x0,
+ .max_xc = 0x03ff,
+ .min_yc = 0x0,
+ .max_yc = 0x03ff,
+ .rept_size = 5,
+ .read_data = zytronic_read_data,
+ .irq_always = true,
+ },
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_ETT_TC5UH
+ [DEVTYPE_TC5UH] = {
+ .min_xc = 0x0,
+ .max_xc = 0x0fff,
+ .min_yc = 0x0,
+ .max_yc = 0x0fff,
+ .rept_size = 5,
+ .read_data = tc5uh_read_data,
+ },
+#endif
};
usbtouch->irq->dev = usbtouch->udev;
- if (usb_submit_urb(usbtouch->irq, GFP_KERNEL))
- return -EIO;
+ if (!usbtouch->type->irq_always) {
+ if (usb_submit_urb(usbtouch->irq, GFP_KERNEL))
+ return -EIO;
+ }
return 0;
}
{
struct usbtouch_usb *usbtouch = input_get_drvdata(input);
- usb_kill_urb(usbtouch->irq);
+ if (!usbtouch->type->irq_always)
+ usb_kill_urb(usbtouch->irq);
}
usb_set_intfdata(intf, usbtouch);
+ if (usbtouch->type->irq_always)
+ usb_submit_urb(usbtouch->irq, GFP_KERNEL);
+
return 0;
out_free_buffers:
dbg("%s - usbtouch is initialized, cleaning up", __func__);
usb_set_intfdata(intf, NULL);
- usb_kill_urb(usbtouch->irq);
+ /* this will stop IO via close */
input_unregister_device(usbtouch->input);
usb_free_urb(usbtouch->irq);
usbtouch_free_buffers(interface_to_usbdev(intf), usbtouch);
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff