* the Free Software Foundation.
*/
+#include <linux/types.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/rcupdate.h>
#include <linux/platform_device.h>
#include <linux/i8042.h>
+#include <linux/slab.h>
#include <asm/io.h>
MODULE_DESCRIPTION("i8042 keyboard and mouse controller driver");
MODULE_LICENSE("GPL");
-static unsigned int i8042_nokbd;
+static bool i8042_nokbd;
module_param_named(nokbd, i8042_nokbd, bool, 0);
MODULE_PARM_DESC(nokbd, "Do not probe or use KBD port.");
-static unsigned int i8042_noaux;
+static bool i8042_noaux;
module_param_named(noaux, i8042_noaux, bool, 0);
MODULE_PARM_DESC(noaux, "Do not probe or use AUX (mouse) port.");
-static unsigned int i8042_nomux;
+static bool i8042_nomux;
module_param_named(nomux, i8042_nomux, bool, 0);
MODULE_PARM_DESC(nomux, "Do not check whether an active multiplexing conrtoller is present.");
-static unsigned int i8042_unlock;
+static bool i8042_unlock;
module_param_named(unlock, i8042_unlock, bool, 0);
MODULE_PARM_DESC(unlock, "Ignore keyboard lock.");
-static unsigned int i8042_reset;
+static bool i8042_reset;
module_param_named(reset, i8042_reset, bool, 0);
MODULE_PARM_DESC(reset, "Reset controller during init and cleanup.");
-static unsigned int i8042_direct;
+static bool i8042_direct;
module_param_named(direct, i8042_direct, bool, 0);
MODULE_PARM_DESC(direct, "Put keyboard port into non-translated mode.");
-static unsigned int i8042_dumbkbd;
+static bool i8042_dumbkbd;
module_param_named(dumbkbd, i8042_dumbkbd, bool, 0);
MODULE_PARM_DESC(dumbkbd, "Pretend that controller can only read data from keyboard");
-static unsigned int i8042_noloop;
+static bool i8042_noloop;
module_param_named(noloop, i8042_noloop, bool, 0);
MODULE_PARM_DESC(noloop, "Disable the AUX Loopback command while probing for the AUX port");
MODULE_PARM_DESC(panicblink, "Frequency with which keyboard LEDs should blink when kernel panics");
#ifdef CONFIG_X86
-static unsigned int i8042_dritek;
+static bool i8042_dritek;
module_param_named(dritek, i8042_dritek, bool, 0);
MODULE_PARM_DESC(dritek, "Force enable the Dritek keyboard extension");
#endif
#ifdef CONFIG_PNP
-static int i8042_nopnp;
+static bool i8042_nopnp;
module_param_named(nopnp, i8042_nopnp, bool, 0);
MODULE_PARM_DESC(nopnp, "Do not use PNP to detect controller settings");
#endif
#define DEBUG
#ifdef DEBUG
-static int i8042_debug;
+static bool i8042_debug;
module_param_named(debug, i8042_debug, bool, 0600);
MODULE_PARM_DESC(debug, "Turn i8042 debugging mode on and off");
#endif
+static bool i8042_bypass_aux_irq_test;
+
#include "i8042.h"
+/*
+ * i8042_lock protects serialization between i8042_command and
+ * the interrupt handler.
+ */
static DEFINE_SPINLOCK(i8042_lock);
+/*
+ * Writers to AUX and KBD ports as well as users issuing i8042_command
+ * directly should acquire i8042_mutex (by means of calling
+ * i8042_lock_chip() and i8042_unlock_ship() helpers) to ensure that
+ * they do not disturb each other (unfortunately in many i8042
+ * implementations write to one of the ports will immediately abort
+ * command that is being processed by another port).
+ */
+static DEFINE_MUTEX(i8042_mutex);
+
struct i8042_port {
struct serio *serio;
int irq;
- unsigned char exists;
+ bool exists;
signed char mux;
};
static unsigned char i8042_initial_ctr;
static unsigned char i8042_ctr;
-static unsigned char i8042_mux_present;
-static unsigned char i8042_kbd_irq_registered;
-static unsigned char i8042_aux_irq_registered;
+static bool i8042_mux_present;
+static bool i8042_kbd_irq_registered;
+static bool i8042_aux_irq_registered;
static unsigned char i8042_suppress_kbd_ack;
static struct platform_device *i8042_platform_device;
static irqreturn_t i8042_interrupt(int irq, void *dev_id);
+static bool (*i8042_platform_filter)(unsigned char data, unsigned char str,
+ struct serio *serio);
+
+void i8042_lock_chip(void)
+{
+ mutex_lock(&i8042_mutex);
+}
+EXPORT_SYMBOL(i8042_lock_chip);
+
+void i8042_unlock_chip(void)
+{
+ mutex_unlock(&i8042_mutex);
+}
+EXPORT_SYMBOL(i8042_unlock_chip);
+
+int i8042_install_filter(bool (*filter)(unsigned char data, unsigned char str,
+ struct serio *serio))
+{
+ unsigned long flags;
+ int ret = 0;
+
+ spin_lock_irqsave(&i8042_lock, flags);
+
+ if (i8042_platform_filter) {
+ ret = -EBUSY;
+ goto out;
+ }
+
+ i8042_platform_filter = filter;
+
+out:
+ spin_unlock_irqrestore(&i8042_lock, flags);
+ return ret;
+}
+EXPORT_SYMBOL(i8042_install_filter);
+
+int i8042_remove_filter(bool (*filter)(unsigned char data, unsigned char str,
+ struct serio *port))
+{
+ unsigned long flags;
+ int ret = 0;
+
+ spin_lock_irqsave(&i8042_lock, flags);
+
+ if (i8042_platform_filter != filter) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ i8042_platform_filter = NULL;
+
+out:
+ spin_unlock_irqrestore(&i8042_lock, flags);
+ return ret;
+}
+EXPORT_SYMBOL(i8042_remove_filter);
/*
* The i8042_wait_read() and i8042_wait_write functions wait for the i8042 to
I8042_CMD_MUX_SEND + port->mux);
}
+
+/*
+ * i8042_aux_close attempts to clear AUX or KBD port state by disabling
+ * and then re-enabling it.
+ */
+
+static void i8042_port_close(struct serio *serio)
+{
+ int irq_bit;
+ int disable_bit;
+ const char *port_name;
+
+ if (serio == i8042_ports[I8042_AUX_PORT_NO].serio) {
+ irq_bit = I8042_CTR_AUXINT;
+ disable_bit = I8042_CTR_AUXDIS;
+ port_name = "AUX";
+ } else {
+ irq_bit = I8042_CTR_KBDINT;
+ disable_bit = I8042_CTR_KBDDIS;
+ port_name = "KBD";
+ }
+
+ i8042_ctr &= ~irq_bit;
+ if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR))
+ printk(KERN_WARNING
+ "i8042.c: Can't write CTR while closing %s port.\n",
+ port_name);
+
+ udelay(50);
+
+ i8042_ctr &= ~disable_bit;
+ i8042_ctr |= irq_bit;
+ if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR))
+ printk(KERN_ERR "i8042.c: Can't reactivate %s port.\n",
+ port_name);
+
+ /*
+ * See if there is any data appeared while we were messing with
+ * port state.
+ */
+ i8042_interrupt(0, NULL);
+}
+
/*
* i8042_start() is called by serio core when port is about to finish
* registering. It will mark port as existing so i8042_interrupt can
{
struct i8042_port *port = serio->port_data;
- port->exists = 1;
+ port->exists = true;
mb();
return 0;
}
{
struct i8042_port *port = serio->port_data;
- port->exists = 0;
+ port->exists = false;
/*
* We synchronize with both AUX and KBD IRQs because there is
}
/*
+ * i8042_filter() filters out unwanted bytes from the input data stream.
+ * It is called from i8042_interrupt and thus is running with interrupts
+ * off and i8042_lock held.
+ */
+static bool i8042_filter(unsigned char data, unsigned char str,
+ struct serio *serio)
+{
+ if (unlikely(i8042_suppress_kbd_ack)) {
+ if ((~str & I8042_STR_AUXDATA) &&
+ (data == 0xfa || data == 0xfe)) {
+ i8042_suppress_kbd_ack--;
+ dbg("Extra keyboard ACK - filtered out\n");
+ return true;
+ }
+ }
+
+ if (i8042_platform_filter && i8042_platform_filter(data, str, serio)) {
+ dbg("Filtered out by platform filter\n");
+ return true;
+ }
+
+ return false;
+}
+
+/*
* i8042_interrupt() is the most important function in this driver -
* it handles the interrupts from the i8042, and sends incoming bytes
* to the upper layers.
static irqreturn_t i8042_interrupt(int irq, void *dev_id)
{
struct i8042_port *port;
+ struct serio *serio;
unsigned long flags;
unsigned char str, data;
unsigned int dfl;
unsigned int port_no;
+ bool filtered;
int ret = 1;
spin_lock_irqsave(&i8042_lock, flags);
+
str = i8042_read_status();
if (unlikely(~str & I8042_STR_OBF)) {
spin_unlock_irqrestore(&i8042_lock, flags);
ret = 0;
goto out;
}
+
data = i8042_read_data();
- spin_unlock_irqrestore(&i8042_lock, flags);
if (i8042_mux_present && (str & I8042_STR_AUXDATA)) {
static unsigned long last_transmit;
}
port = &i8042_ports[port_no];
+ serio = port->exists ? port->serio : NULL;
dbg("%02x <- i8042 (interrupt, %d, %d%s%s)",
data, port_no, irq,
dfl & SERIO_PARITY ? ", bad parity" : "",
dfl & SERIO_TIMEOUT ? ", timeout" : "");
- if (unlikely(i8042_suppress_kbd_ack))
- if (port_no == I8042_KBD_PORT_NO &&
- (data == 0xfa || data == 0xfe)) {
- i8042_suppress_kbd_ack--;
- goto out;
- }
+ filtered = i8042_filter(data, str, serio);
+
+ spin_unlock_irqrestore(&i8042_lock, flags);
- if (likely(port->exists))
- serio_interrupt(port->serio, data, dfl);
+ if (likely(port->exists && !filtered))
+ serio_interrupt(serio, data, dfl);
out:
return IRQ_RETVAL(ret);
}
/*
- * i8042_enable_kbd_port enables keybaord port on chip
+ * i8042_enable_kbd_port enables keyboard port on chip
*/
static int i8042_enable_kbd_port(void)
}
/*
- * i8042_set_mux_mode checks whether the controller has an active
- * multiplexor and puts the chip into Multiplexed (1) or Legacy (0) mode.
+ * i8042_set_mux_mode checks whether the controller has an
+ * active multiplexor and puts the chip into Multiplexed (true)
+ * or Legacy (false) mode.
*/
-static int i8042_set_mux_mode(unsigned int mode, unsigned char *mux_version)
+static int i8042_set_mux_mode(bool multiplex, unsigned char *mux_version)
{
- unsigned char param;
+ unsigned char param, val;
/*
* Get rid of bytes in the queue.
*/
* mouse interface, the last should be version.
*/
- param = 0xf0;
- if (i8042_command(¶m, I8042_CMD_AUX_LOOP) || param != 0xf0)
+ param = val = 0xf0;
+ if (i8042_command(¶m, I8042_CMD_AUX_LOOP) || param != val)
+ return -1;
+ param = val = multiplex ? 0x56 : 0xf6;
+ if (i8042_command(¶m, I8042_CMD_AUX_LOOP) || param != val)
return -1;
- param = mode ? 0x56 : 0xf6;
- if (i8042_command(¶m, I8042_CMD_AUX_LOOP) || param != (mode ? 0x56 : 0xf6))
+ param = val = multiplex ? 0xa4 : 0xa5;
+ if (i8042_command(¶m, I8042_CMD_AUX_LOOP) || param == val)
return -1;
- param = mode ? 0xa4 : 0xa5;
- if (i8042_command(¶m, I8042_CMD_AUX_LOOP) || param == (mode ? 0xa4 : 0xa5))
+
+/*
+ * Workaround for interference with USB Legacy emulation
+ * that causes a v10.12 MUX to be found.
+ */
+ if (param == 0xac)
return -1;
if (mux_version)
* LCS/Telegraphics.
*/
-static int __devinit i8042_check_mux(void)
+static int __init i8042_check_mux(void)
{
unsigned char mux_version;
- if (i8042_set_mux_mode(1, &mux_version))
- return -1;
-
-/*
- * Workaround for interference with USB Legacy emulation
- * that causes a v10.12 MUX to be found.
- */
- if (mux_version == 0xAC)
+ if (i8042_set_mux_mode(true, &mux_version))
return -1;
printk(KERN_INFO "i8042.c: Detected active multiplexing controller, rev %d.%d.\n",
return -EIO;
}
- i8042_mux_present = 1;
+ i8042_mux_present = true;
return 0;
}
/*
* The following is used to test AUX IRQ delivery.
*/
-static struct completion i8042_aux_irq_delivered __devinitdata;
-static int i8042_irq_being_tested __devinitdata;
+static struct completion i8042_aux_irq_delivered __initdata;
+static bool i8042_irq_being_tested __initdata;
-static irqreturn_t __devinit i8042_aux_test_irq(int irq, void *dev_id)
+static irqreturn_t __init i8042_aux_test_irq(int irq, void *dev_id)
{
unsigned long flags;
unsigned char str, data;
str = i8042_read_status();
if (str & I8042_STR_OBF) {
data = i8042_read_data();
+ dbg("%02x <- i8042 (aux_test_irq, %s)",
+ data, str & I8042_STR_AUXDATA ? "aux" : "kbd");
if (i8042_irq_being_tested &&
data == 0xa5 && (str & I8042_STR_AUXDATA))
complete(&i8042_aux_irq_delivered);
* verifies success by readinng CTR. Used when testing for presence of AUX
* port.
*/
-static int __devinit i8042_toggle_aux(int on)
+static int __init i8042_toggle_aux(bool on)
{
unsigned char param;
int i;
* the presence of an AUX interface.
*/
-static int __devinit i8042_check_aux(void)
+static int __init i8042_check_aux(void)
{
int retval = -1;
- int irq_registered = 0;
- int aux_loop_broken = 0;
+ bool irq_registered = false;
+ bool aux_loop_broken = false;
unsigned long flags;
unsigned char param;
* mark it as broken
*/
if (!retval)
- aux_loop_broken = 1;
+ aux_loop_broken = true;
}
/*
* Bit assignment test - filters out PS/2 i8042's in AT mode
*/
- if (i8042_toggle_aux(0)) {
+ if (i8042_toggle_aux(false)) {
printk(KERN_WARNING "Failed to disable AUX port, but continuing anyway... Is this a SiS?\n");
printk(KERN_WARNING "If AUX port is really absent please use the 'i8042.noaux' option.\n");
}
- if (i8042_toggle_aux(1))
+ if (i8042_toggle_aux(true))
return -1;
/*
* used it for a PCI card or somethig else.
*/
- if (i8042_noloop || aux_loop_broken) {
+ if (i8042_noloop || i8042_bypass_aux_irq_test || aux_loop_broken) {
/*
* Without LOOP command we can't test AUX IRQ delivery. Assume the port
* is working and hope we are right.
"i8042", i8042_platform_device))
goto out;
- irq_registered = 1;
+ irq_registered = true;
if (i8042_enable_aux_port())
goto out;
spin_lock_irqsave(&i8042_lock, flags);
init_completion(&i8042_aux_irq_delivered);
- i8042_irq_being_tested = 1;
+ i8042_irq_being_tested = true;
param = 0xa5;
retval = __i8042_command(¶m, I8042_CMD_AUX_LOOP & 0xf0ff);
* AUX IRQ was never delivered so we need to flush the controller to
* get rid of the byte we put there; otherwise keyboard may not work.
*/
+ dbg(" -- i8042 (aux irq test timeout)");
i8042_flush();
retval = -1;
}
static int i8042_controller_selftest(void)
{
unsigned char param;
+ int i = 0;
if (!i8042_reset)
return 0;
- if (i8042_command(¶m, I8042_CMD_CTL_TEST)) {
- printk(KERN_ERR "i8042.c: i8042 controller self test timeout.\n");
- return -ENODEV;
- }
+ /*
+ * We try this 5 times; on some really fragile systems this does not
+ * take the first time...
+ */
+ do {
+
+ if (i8042_command(¶m, I8042_CMD_CTL_TEST)) {
+ printk(KERN_ERR "i8042.c: i8042 controller self test timeout.\n");
+ return -ENODEV;
+ }
+
+ if (param == I8042_RET_CTL_TEST)
+ return 0;
- if (param != I8042_RET_CTL_TEST) {
printk(KERN_ERR "i8042.c: i8042 controller selftest failed. (%#x != %#x)\n",
- param, I8042_RET_CTL_TEST);
- return -EIO;
- }
+ param, I8042_RET_CTL_TEST);
+ msleep(50);
+ } while (i++ < 5);
+#ifdef CONFIG_X86
+ /*
+ * On x86, we don't fail entire i8042 initialization if controller
+ * reset fails in hopes that keyboard port will still be functional
+ * and user will still get a working keyboard. This is especially
+ * important on netbooks. On other arches we trust hardware more.
+ */
+ printk(KERN_INFO
+ "i8042: giving up on controller selftest, continuing anyway...\n");
return 0;
+#else
+ return -EIO;
+#endif
}
/*
static int i8042_controller_init(void)
{
unsigned long flags;
+ int n = 0;
+ unsigned char ctr[2];
/*
- * Save the CTR for restoral on unload / reboot.
+ * Save the CTR for restore on unload / reboot.
*/
- if (i8042_command(&i8042_ctr, I8042_CMD_CTL_RCTR)) {
- printk(KERN_ERR "i8042.c: Can't read CTR while initializing i8042.\n");
- return -EIO;
- }
+ do {
+ if (n >= 10) {
+ printk(KERN_ERR
+ "i8042.c: Unable to get stable CTR read.\n");
+ return -EIO;
+ }
- i8042_initial_ctr = i8042_ctr;
+ if (n != 0)
+ udelay(50);
+
+ if (i8042_command(&ctr[n++ % 2], I8042_CMD_CTL_RCTR)) {
+ printk(KERN_ERR
+ "i8042.c: Can't read CTR while initializing i8042.\n");
+ return -EIO;
+ }
+
+ } while (n < 2 || ctr[0] != ctr[1]);
+
+ i8042_initial_ctr = i8042_ctr = ctr[0];
/*
* Disable the keyboard interface and interrupt.
*/
if (~i8042_ctr & I8042_CTR_XLATE)
- i8042_direct = 1;
+ i8042_direct = true;
/*
* Set nontranslated mode for the kbd interface if requested by an option.
return -EIO;
}
+/*
+ * Flush whatever accumulated while we were disabling keyboard port.
+ */
+
+ i8042_flush();
+
return 0;
}
i8042_ctr |= I8042_CTR_KBDDIS | I8042_CTR_AUXDIS;
i8042_ctr &= ~(I8042_CTR_KBDINT | I8042_CTR_AUXINT);
+ if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR))
+ printk(KERN_WARNING "i8042.c: Can't write CTR while resetting.\n");
+
/*
* Disable MUX mode if present.
*/
if (i8042_mux_present)
- i8042_set_mux_mode(0, NULL);
+ i8042_set_mux_mode(false, NULL);
/*
* Reset the controller if requested.
#undef DELAY
+#ifdef CONFIG_X86
+static void i8042_dritek_enable(void)
+{
+ char param = 0x90;
+ int error;
+
+ error = i8042_command(¶m, 0x1059);
+ if (error)
+ printk(KERN_WARNING
+ "Failed to enable DRITEK extension: %d\n",
+ error);
+}
+#endif
+
#ifdef CONFIG_PM
+
/*
- * Here we try to restore the original BIOS settings. We only want to
- * do that once, when we really suspend, not when we taking memory
- * snapshot for swsusp (in this case we'll perform required cleanup
- * as part of shutdown process).
+ * Here we try to restore the original BIOS settings to avoid
+ * upsetting it.
*/
-static int i8042_suspend(struct platform_device *dev, pm_message_t state)
+static int i8042_pm_reset(struct device *dev)
{
- if (dev->dev.power.power_state.event != state.event) {
- if (state.event == PM_EVENT_SUSPEND)
- i8042_controller_reset();
-
- dev->dev.power.power_state = state;
- }
+ i8042_controller_reset();
return 0;
}
-
/*
- * Here we try to reset everything back to a state in which suspended
+ * Here we try to reset everything back to a state we had
+ * before suspending.
*/
-static int i8042_resume(struct platform_device *dev)
+static int i8042_pm_restore(struct device *dev)
{
int error;
-/*
- * Do not bother with restoring state if we haven't suspened yet
- */
- if (dev->dev.power.power_state.event == PM_EVENT_ON)
- return 0;
-
error = i8042_controller_check();
if (error)
return error;
i8042_ctr |= I8042_CTR_AUXDIS | I8042_CTR_KBDDIS;
i8042_ctr &= ~(I8042_CTR_AUXINT | I8042_CTR_KBDINT);
if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
- printk(KERN_ERR "i8042: Can't write CTR to resume\n");
- return -EIO;
+ printk(KERN_WARNING "i8042: Can't write CTR to resume, retrying...\n");
+ msleep(50);
+ if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
+ printk(KERN_ERR "i8042: CTR write retry failed\n");
+ return -EIO;
+ }
}
+
+#ifdef CONFIG_X86
+ if (i8042_dritek)
+ i8042_dritek_enable();
+#endif
+
if (i8042_mux_present) {
- if (i8042_set_mux_mode(1, NULL) || i8042_enable_mux_ports())
+ if (i8042_set_mux_mode(true, NULL) || i8042_enable_mux_ports())
printk(KERN_WARNING
"i8042: failed to resume active multiplexor, "
"mouse won't work.\n");
i8042_interrupt(0, NULL);
- dev->dev.power.power_state = PMSG_ON;
+ return 0;
+}
+
+static int i8042_pm_thaw(struct device *dev)
+{
+ i8042_interrupt(0, NULL);
return 0;
}
+
+static const struct dev_pm_ops i8042_pm_ops = {
+ .suspend = i8042_pm_reset,
+ .resume = i8042_pm_restore,
+ .thaw = i8042_pm_thaw,
+ .poweroff = i8042_pm_reset,
+ .restore = i8042_pm_restore,
+};
+
#endif /* CONFIG_PM */
/*
i8042_controller_reset();
}
-static int __devinit i8042_create_kbd_port(void)
+static int __init i8042_create_kbd_port(void)
{
struct serio *serio;
struct i8042_port *port = &i8042_ports[I8042_KBD_PORT_NO];
serio->write = i8042_dumbkbd ? NULL : i8042_kbd_write;
serio->start = i8042_start;
serio->stop = i8042_stop;
+ serio->close = i8042_port_close;
serio->port_data = port;
serio->dev.parent = &i8042_platform_device->dev;
strlcpy(serio->name, "i8042 KBD port", sizeof(serio->name));
return 0;
}
-static int __devinit i8042_create_aux_port(int idx)
+static int __init i8042_create_aux_port(int idx)
{
struct serio *serio;
int port_no = idx < 0 ? I8042_AUX_PORT_NO : I8042_MUX_PORT_NO + idx;
if (idx < 0) {
strlcpy(serio->name, "i8042 AUX port", sizeof(serio->name));
strlcpy(serio->phys, I8042_AUX_PHYS_DESC, sizeof(serio->phys));
+ serio->close = i8042_port_close;
} else {
snprintf(serio->name, sizeof(serio->name), "i8042 AUX%d port", idx);
snprintf(serio->phys, sizeof(serio->phys), I8042_MUX_PHYS_DESC, idx + 1);
return 0;
}
-static void __devinit i8042_free_kbd_port(void)
+static void __init i8042_free_kbd_port(void)
{
kfree(i8042_ports[I8042_KBD_PORT_NO].serio);
i8042_ports[I8042_KBD_PORT_NO].serio = NULL;
}
-static void __devinit i8042_free_aux_ports(void)
+static void __init i8042_free_aux_ports(void)
{
int i;
}
}
-static void __devinit i8042_register_ports(void)
+static void __init i8042_register_ports(void)
{
int i;
}
}
+/*
+ * Checks whether port belongs to i8042 controller.
+ */
+bool i8042_check_port_owner(const struct serio *port)
+{
+ int i;
+
+ for (i = 0; i < I8042_NUM_PORTS; i++)
+ if (i8042_ports[i].serio == port)
+ return true;
+
+ return false;
+}
+EXPORT_SYMBOL(i8042_check_port_owner);
+
static void i8042_free_irqs(void)
{
if (i8042_aux_irq_registered)
if (i8042_kbd_irq_registered)
free_irq(I8042_KBD_IRQ, i8042_platform_device);
- i8042_aux_irq_registered = i8042_kbd_irq_registered = 0;
+ i8042_aux_irq_registered = i8042_kbd_irq_registered = false;
}
-static int __devinit i8042_setup_aux(void)
+static int __init i8042_setup_aux(void)
{
int (*aux_enable)(void);
int error;
if (aux_enable())
goto err_free_irq;
- i8042_aux_irq_registered = 1;
+ i8042_aux_irq_registered = true;
return 0;
err_free_irq:
return error;
}
-static int __devinit i8042_setup_kbd(void)
+static int __init i8042_setup_kbd(void)
{
int error;
if (error)
goto err_free_irq;
- i8042_kbd_irq_registered = 1;
+ i8042_kbd_irq_registered = true;
return 0;
err_free_irq:
return error;
}
-static int __devinit i8042_probe(struct platform_device *dev)
+static int __init i8042_probe(struct platform_device *dev)
{
int error;
- char param;
+
+ i8042_platform_device = dev;
error = i8042_controller_selftest();
if (error)
if (error)
return error;
+#ifdef CONFIG_X86
+ if (i8042_dritek)
+ i8042_dritek_enable();
+#endif
+
if (!i8042_noaux) {
error = i8042_setup_aux();
if (error && error != -ENODEV && error != -EBUSY)
if (error)
goto out_fail;
}
-
- if (i8042_dritek) {
- param = 0x90;
- error = i8042_command(¶m, 0x1059);
- if (error)
- goto out_fail;
- }
-
/*
* Ok, everything is ready, let's register all serio ports
*/
i8042_free_aux_ports(); /* in case KBD failed but AUX not */
i8042_free_irqs();
i8042_controller_reset();
+ i8042_platform_device = NULL;
return error;
}
i8042_unregister_ports();
i8042_free_irqs();
i8042_controller_reset();
+ i8042_platform_device = NULL;
return 0;
}
.driver = {
.name = "i8042",
.owner = THIS_MODULE,
+#ifdef CONFIG_PM
+ .pm = &i8042_pm_ops,
+#endif
},
- .probe = i8042_probe,
.remove = __devexit_p(i8042_remove),
.shutdown = i8042_shutdown,
-#ifdef CONFIG_PM
- .suspend = i8042_suspend,
- .resume = i8042_resume,
-#endif
};
static int __init i8042_init(void)
{
+ struct platform_device *pdev;
int err;
dbg_init();
if (err)
goto err_platform_exit;
- err = platform_driver_register(&i8042_driver);
- if (err)
+ pdev = platform_create_bundle(&i8042_driver, i8042_probe, NULL, 0, NULL, 0);
+ if (IS_ERR(pdev)) {
+ err = PTR_ERR(pdev);
goto err_platform_exit;
-
- i8042_platform_device = platform_device_alloc("i8042", -1);
- if (!i8042_platform_device) {
- err = -ENOMEM;
- goto err_unregister_driver;
}
- err = platform_device_add(i8042_platform_device);
- if (err)
- goto err_free_device;
-
panic_blink = i8042_panic_blink;
return 0;
- err_free_device:
- platform_device_put(i8042_platform_device);
- err_unregister_driver:
- platform_driver_unregister(&i8042_driver);
err_platform_exit:
i8042_platform_exit();
-
return err;
}
static void __exit i8042_exit(void)
{
- platform_device_unregister(i8042_platform_device);
platform_driver_unregister(&i8042_driver);
+ platform_device_unregister(i8042_platform_device);
i8042_platform_exit();
panic_blink = NULL;
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff