if INPUT_KEYBOARD
config KEYBOARD_ATKBD
- tristate "AT keyboard" if EMBEDDED || !X86_PC
+ tristate "AT keyboard" if EMBEDDED || !X86
default y
select SERIO
select SERIO_LIBPS2
- select SERIO_I8042 if X86_PC
+ select SERIO_I8042 if X86
select SERIO_GSCPS2 if GSC
help
Say Y here if you want to use a standard AT or PS/2 keyboard. Usually
To compile this driver as a module, choose M here: the
module will be called newtonkbd.
+config KEYBOARD_STOWAWAY
+ tristate "Stowaway keyboard"
+ select SERIO
+ help
+ Say Y here if you have a Stowaway keyboard on a serial port.
+ Stowaway compatible keyboards like Dicota Input-PDA keyboard
+ are also supported by this driver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called stowaway.
+
config KEYBOARD_CORGI
tristate "Corgi keyboard"
depends on PXA_SHARPSL
- default y
+ default y
help
- Say Y here to enable the keyboard on the Sharp Zaurus SL-C7xx
+ Say Y here to enable the keyboard on the Sharp Zaurus SL-C7xx
series of PDAs.
- To compile this driver as a module, choose M here: the
+ To compile this driver as a module, choose M here: the
module will be called corgikbd.
config KEYBOARD_SPITZ
To compile this driver as a module, choose M here: the
module will be called spitzkbd.
+config KEYBOARD_TOSA
+ tristate "Tosa keyboard"
+ depends on MACH_TOSA
+ default y
+ help
+ Say Y here to enable the keyboard on the Sharp Zaurus SL-6000x (Tosa)
+
+ To compile this driver as a module, choose M here: the
+ module will be called tosakbd.
+
+config KEYBOARD_TOSA_USE_EXT_KEYCODES
+ bool "Tosa keyboard: use extended keycodes"
+ depends on KEYBOARD_TOSA
+ default n
+ help
+ Say Y here to enable the tosa keyboard driver to generate extended
+ (>= 127) keycodes. Be aware, that they can't be correctly interpreted
+ by either console keyboard driver or by Kdrive keybd driver.
+
+ Say Y only if you know, what you are doing!
+
config KEYBOARD_AMIGA
tristate "Amiga keyboard"
depends on AMIGA
To compile this driver as a module, choose M here: the
module will be called amikbd.
+config ATARI_KBD_CORE
+ bool
+
+config KEYBOARD_ATARI
+ tristate "Atari keyboard"
+ depends on ATARI
+ select ATARI_KBD_CORE
+ help
+ Say Y here if you are running Linux on any Atari and have a keyboard
+ attached.
+
+ To compile this driver as a module, choose M here: the
+ module will be called atakbd.
+
config KEYBOARD_HIL_OLD
tristate "HP HIL keyboard support (simple driver)"
- depends on GSC
+ depends on GSC || HP300
default y
help
The "Human Interface Loop" is a older, 8-channel USB-like
However, it has been thoroughly tested and is stable.
If you want full HIL support including support for multiple
- keyboards, mices and tablets, you have to enable the
+ keyboards, mice, and tablets, you have to enable the
"HP System Device Controller i8042 Support" in the input/serio
submenu.
config KEYBOARD_HIL
tristate "HP HIL keyboard support"
- depends on GSC
+ depends on GSC || HP300
default y
select HP_SDC
select HIL_MLC
This driver implements support for HIL-keyboards attached
to your machine, so normally you should say Y here.
+config KEYBOARD_HP6XX
+ tristate "HP Jornada 6xx keyboard"
+ depends on SH_HP6XX
+ select INPUT_POLLDEV
+ help
+ Say Y here if you have a HP Jornada 620/660/680/690 and want to
+ support the built-in keyboard.
+
+ To compile this driver as a module, choose M here: the
+ module will be called jornada680_kbd.
+
+config KEYBOARD_HP7XX
+ tristate "HP Jornada 7xx keyboard"
+ depends on SA1100_JORNADA720_SSP && SA1100_SSP
+ help
+ Say Y here if you have a HP Jornada 710/720/728 and want to
+ support the built-in keyboard.
+
+ To compile this driver as a module, choose M here: the
+ module will be called jornada720_kbd.
+
+config KEYBOARD_OMAP
+ tristate "TI OMAP keypad support"
+ depends on (ARCH_OMAP1 || ARCH_OMAP2)
+ help
+ Say Y here if you want to use the OMAP keypad.
+
+ To compile this driver as a module, choose M here: the
+ module will be called omap-keypad.
+
+config KEYBOARD_PXA27x
+ tristate "PXA27x/PXA3xx keypad support"
+ depends on PXA27x || PXA3xx
+ help
+ Enable support for PXA27x/PXA3xx keypad controller
+
+ To compile this driver as a module, choose M here: the
+ module will be called pxa27x_keypad.
+
+config KEYBOARD_PXA930_ROTARY
+ tristate "PXA930/PXA935 Enhanced Rotary Controller Support"
+ depends on CPU_PXA930 || CPU_PXA935
+ help
+ Enable support for PXA930/PXA935 Enhanced Rotary Controller.
+
+ To compile this driver as a module, choose M here: the
+ module will be called pxa930_rotary.
+
+config KEYBOARD_AAED2000
+ tristate "AAED-2000 keyboard"
+ depends on MACH_AAED2000
+ select INPUT_POLLDEV
+ default y
+ help
+ Say Y here to enable the keyboard on the Agilent AAED-2000
+ development board.
+
+ To compile this driver as a module, choose M here: the
+ module will be called aaed2000_kbd.
+
+config KEYBOARD_GPIO
+ tristate "GPIO Buttons"
+ depends on GENERIC_GPIO
+ help
+ This driver implements support for buttons connected
+ to GPIO pins of various CPUs (and some other chips).
+
+ Say Y here if your device has buttons connected
+ directly to such GPIO pins. Your board-specific
+ setup logic must also provide a platform device,
+ with configuration data saying which GPIOs are used.
+
+ To compile this driver as a module, choose M here: the
+ module will be called gpio-keys.
+
+config KEYBOARD_MAPLE
+ tristate "Maple bus keyboard"
+ depends on SH_DREAMCAST && MAPLE
+ help
+ Say Y here if you have a Dreamcast console running Linux and have
+ a keyboard attached to its Maple bus.
+
+ To compile this driver as a module, choose M here: the
+ module will be called maple_keyb.
+
+config KEYBOARD_BFIN
+ tristate "Blackfin BF54x keypad support"
+ depends on (BF54x && !BF544)
+ help
+ Say Y here if you want to use the BF54x keypad.
+
+ To compile this driver as a module, choose M here: the
+ module will be called bf54x-keys.
+
+config KEYBOARD_SH_KEYSC
+ tristate "SuperH KEYSC keypad support"
+ depends on SUPERH
+ help
+ Say Y here if you want to use a keypad attached to the KEYSC block
+ on SuperH processors such as sh7722 and sh7343.
+
+ To compile this driver as a module, choose M here: the
+ module will be called sh_keysc.
endif
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff