* Grep for inline FIXME comments below.
*/
-#include <linux/blkdev.h>
#include <linux/compiler.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/list.h>
+#include <linux/mm.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
+#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/stat.h>
#include <linux/stringify.h>
#include <linux/types.h>
#include <linux/wait.h>
+#include <linux/workqueue.h>
#include <asm/byteorder.h>
#include <asm/errno.h>
"(3 = 800Mb/s, 2 = 400Mb/s, 1 = 200Mb/s, 0 = 100Mb/s)");
/*
- * Set serialize_io to 1 if you'd like only one scsi command sent
- * down to us at a time (debugging). This might be necessary for very
- * badly behaved sbp2 devices.
+ * Set serialize_io to 0 or N to use dynamically appended lists of command ORBs.
+ * This is and always has been buggy in multiple subtle ways. See above TODOs.
*/
static int sbp2_serialize_io = 1;
-module_param_named(serialize_io, sbp2_serialize_io, int, 0444);
-MODULE_PARM_DESC(serialize_io, "Serialize I/O coming from scsi drivers "
- "(default = 1, faster = 0)");
+module_param_named(serialize_io, sbp2_serialize_io, bool, 0444);
+MODULE_PARM_DESC(serialize_io, "Serialize requests coming from SCSI drivers "
+ "(default = Y, faster but buggy = N)");
/*
* Bump up max_sectors if you'd like to support very large sized
* are possible on OXFW911 and newer Oxsemi bridges.
*/
static int sbp2_exclusive_login = 1;
-module_param_named(exclusive_login, sbp2_exclusive_login, int, 0644);
+module_param_named(exclusive_login, sbp2_exclusive_login, bool, 0644);
MODULE_PARM_DESC(exclusive_login, "Exclusive login to sbp2 device "
- "(default = 1)");
+ "(default = Y, use N for concurrent initiators)");
/*
* If any of the following workarounds is required for your device to work,
", override internal blacklist = " __stringify(SBP2_WORKAROUND_OVERRIDE)
", or a combination)");
+/*
+ * This influences the format of the sysfs attribute
+ * /sys/bus/scsi/devices/.../ieee1394_id.
+ *
+ * The default format is like in older kernels: %016Lx:%d:%d
+ * It contains the target's EUI-64, a number given to the logical unit by
+ * the ieee1394 driver's nodemgr (starting at 0), and the LUN.
+ *
+ * The long format is: %016Lx:%06x:%04x
+ * It contains the target's EUI-64, the unit directory's directory_ID as per
+ * IEEE 1212 clause 7.7.19, and the LUN. This format comes closest to the
+ * format of SBP(-3) target port and logical unit identifier as per SAM (SCSI
+ * Architecture Model) rev.2 to 4 annex A. Therefore and because it is
+ * independent of the implementation of the ieee1394 nodemgr, the longer format
+ * is recommended for future use.
+ */
+static int sbp2_long_sysfs_ieee1394_id;
+module_param_named(long_ieee1394_id, sbp2_long_sysfs_ieee1394_id, bool, 0644);
+MODULE_PARM_DESC(long_ieee1394_id, "8+3+2 bytes format of ieee1394_id in sysfs "
+ "(default = backwards-compatible = N, SAM-conforming = Y)");
+
#define SBP2_INFO(fmt, args...) HPSB_INFO("sbp2: "fmt, ## args)
#define SBP2_ERR(fmt, args...) HPSB_ERR("sbp2: "fmt, ## args)
.use_clustering = ENABLE_CLUSTERING,
.cmd_per_lun = SBP2_MAX_CMDS,
.can_queue = SBP2_MAX_CMDS,
- .emulated = 1,
.sdev_attrs = sbp2_sysfs_sdev_attrs,
};
static int sbp2util_create_command_orb_pool(struct sbp2_lu *lu)
{
struct sbp2_fwhost_info *hi = lu->hi;
- int i;
- unsigned long flags, orbs;
struct sbp2_command_info *cmd;
+ int i, orbs = sbp2_serialize_io ? 2 : SBP2_MAX_CMDS;
- orbs = sbp2_serialize_io ? 2 : SBP2_MAX_CMDS;
-
- spin_lock_irqsave(&lu->cmd_orb_lock, flags);
for (i = 0; i < orbs; i++) {
- cmd = kzalloc(sizeof(*cmd), GFP_ATOMIC);
- if (!cmd) {
- spin_unlock_irqrestore(&lu->cmd_orb_lock, flags);
+ cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+ if (!cmd)
return -ENOMEM;
- }
cmd->command_orb_dma = dma_map_single(hi->host->device.parent,
&cmd->command_orb,
sizeof(struct sbp2_command_orb),
cmd->sge_dma = dma_map_single(hi->host->device.parent,
&cmd->scatter_gather_element,
sizeof(cmd->scatter_gather_element),
- DMA_BIDIRECTIONAL);
+ DMA_TO_DEVICE);
INIT_LIST_HEAD(&cmd->list);
list_add_tail(&cmd->list, &lu->cmd_orb_completed);
}
- spin_unlock_irqrestore(&lu->cmd_orb_lock, flags);
return 0;
}
DMA_TO_DEVICE);
dma_unmap_single(host->device.parent, cmd->sge_dma,
sizeof(cmd->scatter_gather_element),
- DMA_BIDIRECTIONAL);
+ DMA_TO_DEVICE);
kfree(cmd);
}
spin_unlock_irqrestore(&lu->cmd_orb_lock, flags);
SBP2_ERR("failed to register lower 4GB address range");
goto failed_alloc;
}
+#else
+ if (dma_set_mask(hi->host->device.parent, DMA_32BIT_MASK)) {
+ SBP2_ERR("failed to set 4GB DMA mask");
+ goto failed_alloc;
+ }
#endif
}
if (!lu->login_orb)
goto alloc_fail;
- if (sbp2util_create_command_orb_pool(lu)) {
- SBP2_ERR("sbp2util_create_command_orb_pool failed!");
- sbp2_remove_device(lu);
- return -ENOMEM;
- }
+ if (sbp2util_create_command_orb_pool(lu))
+ goto alloc_fail;
/* Wait a second before trying to log in. Previously logged in
* initiators need a chance to reconnect. */
DMA_TO_DEVICE);
dma_sync_single_for_device(hi->host->device.parent, cmd->sge_dma,
sizeof(cmd->scatter_gather_element),
- DMA_BIDIRECTIONAL);
+ DMA_TO_DEVICE);
/* check to see if there are any previous orbs to use */
spin_lock_irqsave(&lu->cmd_orb_lock, flags);
DMA_TO_DEVICE);
dma_sync_single_for_cpu(hi->host->device.parent, cmd->sge_dma,
sizeof(cmd->scatter_gather_element),
- DMA_BIDIRECTIONAL);
+ DMA_TO_DEVICE);
/* Grab SCSI command pointers and check status. */
/*
* FIXME: If the src field in the status is 1, the ORB DMA must
DMA_TO_DEVICE);
dma_sync_single_for_cpu(hi->host->device.parent, cmd->sge_dma,
sizeof(cmd->scatter_gather_element),
- DMA_BIDIRECTIONAL);
+ DMA_TO_DEVICE);
sbp2util_mark_command_completed(lu, cmd);
if (cmd->Current_SCpnt) {
cmd->Current_SCpnt->result = status << 16;
{
struct sbp2_lu *lu = (struct sbp2_lu *)sdev->host->hostdata[0];
- blk_queue_dma_alignment(sdev->request_queue, (512 - 1));
sdev->use_10_for_rw = 1;
if (sdev->type == TYPE_ROM)
dma_sync_single_for_cpu(hi->host->device.parent,
cmd->sge_dma,
sizeof(cmd->scatter_gather_element),
- DMA_BIDIRECTIONAL);
+ DMA_TO_DEVICE);
sbp2util_mark_command_completed(lu, cmd);
if (cmd->Current_SCpnt) {
cmd->Current_SCpnt->result = DID_ABORT << 16;
if (!(lu = (struct sbp2_lu *)sdev->host->hostdata[0]))
return 0;
- return sprintf(buf, "%016Lx:%d:%d\n", (unsigned long long)lu->ne->guid,
- lu->ud->id, ORB_SET_LUN(lu->lun));
+ if (sbp2_long_sysfs_ieee1394_id)
+ return sprintf(buf, "%016Lx:%06x:%04x\n",
+ (unsigned long long)lu->ne->guid,
+ lu->ud->directory_id, ORB_SET_LUN(lu->lun));
+ else
+ return sprintf(buf, "%016Lx:%d:%d\n",
+ (unsigned long long)lu->ne->guid,
+ lu->ud->id, ORB_SET_LUN(lu->lun));
}
MODULE_AUTHOR("Ben Collins <bcollins@debian.org>");
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff