-
#ifndef IEEE1394_HIGHLEVEL_H
#define IEEE1394_HIGHLEVEL_H
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
-struct hpsb_address_serve {
- struct list_head host_list; /* per host list */
+struct module;
- struct list_head hl_list; /* hpsb_highlevel list */
+#include "ieee1394_types.h"
- struct hpsb_address_ops *op;
+struct hpsb_host;
+/* internal to ieee1394 core */
+struct hpsb_address_serve {
+ struct list_head host_list; /* per host list */
+ struct list_head hl_list; /* hpsb_highlevel list */
+ const struct hpsb_address_ops *op;
struct hpsb_host *host;
-
- /* first address handled and first address behind, quadlet aligned */
- u64 start, end;
+ u64 start; /* first address handled, quadlet aligned */
+ u64 end; /* first address behind, quadlet aligned */
};
-
-/*
- * The above structs are internal to highlevel driver handling. Only the
- * following structures are of interest to actual highlevel drivers.
- */
+/* Only the following structures are of interest to actual highlevel drivers. */
struct hpsb_highlevel {
- struct module *owner;
const char *name;
- /* Any of the following pointers can legally be NULL, except for
- * iso_receive which can only be NULL when you don't request
- * channels. */
+ /* Any of the following pointers can legally be NULL. */
- /* New host initialized. Will also be called during
- * hpsb_register_highlevel for all hosts already installed. */
- void (*add_host) (struct hpsb_host *host);
+ /* New host initialized. Will also be called during
+ * hpsb_register_highlevel for all hosts already installed. */
+ void (*add_host)(struct hpsb_host *host);
- /* Host about to be removed. Will also be called during
- * hpsb_unregister_highlevel once for each host. */
- void (*remove_host) (struct hpsb_host *host);
+ /* Host about to be removed. Will also be called during
+ * hpsb_unregister_highlevel once for each host. */
+ void (*remove_host)(struct hpsb_host *host);
- /* Host experienced bus reset with possible configuration changes.
+ /* Host experienced bus reset with possible configuration changes.
* Note that this one may occur during interrupt/bottom half handling.
* You can not expect to be able to do stock hpsb_reads. */
- void (*host_reset) (struct hpsb_host *host);
-
- /* An isochronous packet was received. Channel contains the channel
- * number for your convenience, it is also contained in the included
- * packet header (first quadlet, CRCs are missing). You may get called
- * for channel/host combinations you did not request. */
- void (*iso_receive) (struct hpsb_host *host, int channel,
- quadlet_t *data, size_t length);
+ void (*host_reset)(struct hpsb_host *host);
- /* A write request was received on either the FCP_COMMAND (direction =
- * 0) or the FCP_RESPONSE (direction = 1) register. The cts arg
- * contains the cts field (first byte of data). */
- void (*fcp_request) (struct hpsb_host *host, int nodeid, int direction,
- int cts, u8 *data, size_t length);
+ /* A write request was received on either the FCP_COMMAND (direction =
+ * 0) or the FCP_RESPONSE (direction = 1) register. The cts arg
+ * contains the cts field (first byte of data). */
+ void (*fcp_request)(struct hpsb_host *host, int nodeid, int direction,
+ int cts, u8 *data, size_t length);
/* These are initialized by the subsystem when the
* hpsb_higlevel is registered. */
};
struct hpsb_address_ops {
- /*
- * Null function pointers will make the respective operation complete
- * with RCODE_TYPE_ERROR. Makes for easy to implement read-only
- * registers (just leave everything but read NULL).
- *
- * All functions shall return appropriate IEEE 1394 rcodes.
- */
-
- /* These functions have to implement block reads for themselves. */
- /* These functions either return a response code
- or a negative number. In the first case a response will be generated; in the
- later case, no response will be sent and the driver, that handled the request
- will send the response itself
- */
- int (*read) (struct hpsb_host *host, int nodeid, quadlet_t *buffer,
- u64 addr, size_t length, u16 flags);
- int (*write) (struct hpsb_host *host, int nodeid, int destid,
- quadlet_t *data, u64 addr, size_t length, u16 flags);
-
- /* Lock transactions: write results of ext_tcode operation into
- * *store. */
- int (*lock) (struct hpsb_host *host, int nodeid, quadlet_t *store,
- u64 addr, quadlet_t data, quadlet_t arg, int ext_tcode, u16 flags);
- int (*lock64) (struct hpsb_host *host, int nodeid, octlet_t *store,
- u64 addr, octlet_t data, octlet_t arg, int ext_tcode, u16 flags);
+ /*
+ * Null function pointers will make the respective operation complete
+ * with RCODE_TYPE_ERROR. Makes for easy to implement read-only
+ * registers (just leave everything but read NULL).
+ *
+ * All functions shall return appropriate IEEE 1394 rcodes.
+ */
+
+ /* These functions have to implement block reads for themselves.
+ *
+ * These functions either return a response code or a negative number.
+ * In the first case a response will be generated. In the latter case,
+ * no response will be sent and the driver which handled the request
+ * will send the response itself. */
+ int (*read)(struct hpsb_host *host, int nodeid, quadlet_t *buffer,
+ u64 addr, size_t length, u16 flags);
+ int (*write)(struct hpsb_host *host, int nodeid, int destid,
+ quadlet_t *data, u64 addr, size_t length, u16 flags);
+
+ /* Lock transactions: write results of ext_tcode operation into
+ * *store. */
+ int (*lock)(struct hpsb_host *host, int nodeid, quadlet_t *store,
+ u64 addr, quadlet_t data, quadlet_t arg, int ext_tcode,
+ u16 flags);
+ int (*lock64)(struct hpsb_host *host, int nodeid, octlet_t *store,
+ u64 addr, octlet_t data, octlet_t arg, int ext_tcode,
+ u16 flags);
};
-
void highlevel_add_host(struct hpsb_host *host);
void highlevel_remove_host(struct hpsb_host *host);
void highlevel_host_reset(struct hpsb_host *host);
-
-
-/* these functions are called to handle transactions. They are called, when
- a packet arrives. The flags argument contains the second word of the first header
- quadlet of the incoming packet (containing transaction label, retry code,
- transaction code and priority). These functions either return a response code
- or a negative number. In the first case a response will be generated; in the
- later case, no response will be sent and the driver, that handled the request
- will send the response itself.
-*/
-int highlevel_read(struct hpsb_host *host, int nodeid, void *data,
- u64 addr, unsigned int length, u16 flags);
-int highlevel_write(struct hpsb_host *host, int nodeid, int destid,
- void *data, u64 addr, unsigned int length, u16 flags);
+int highlevel_read(struct hpsb_host *host, int nodeid, void *data, u64 addr,
+ unsigned int length, u16 flags);
+int highlevel_write(struct hpsb_host *host, int nodeid, int destid, void *data,
+ u64 addr, unsigned int length, u16 flags);
int highlevel_lock(struct hpsb_host *host, int nodeid, quadlet_t *store,
- u64 addr, quadlet_t data, quadlet_t arg, int ext_tcode, u16 flags);
+ u64 addr, quadlet_t data, quadlet_t arg, int ext_tcode,
+ u16 flags);
int highlevel_lock64(struct hpsb_host *host, int nodeid, octlet_t *store,
- u64 addr, octlet_t data, octlet_t arg, int ext_tcode, u16 flags);
-
-void highlevel_iso_receive(struct hpsb_host *host, void *data,
- size_t length);
+ u64 addr, octlet_t data, octlet_t arg, int ext_tcode,
+ u16 flags);
void highlevel_fcp_request(struct hpsb_host *host, int nodeid, int direction,
- void *data, size_t length);
-
+ void *data, size_t length);
-/*
- * Register highlevel driver. The name pointer has to stay valid at all times
- * because the string is not copied.
+/**
+ * hpsb_init_highlevel - initialize a struct hpsb_highlevel
+ *
+ * This is only necessary if hpsb_get_hostinfo_bykey can be called
+ * before hpsb_register_highlevel.
*/
+static inline void hpsb_init_highlevel(struct hpsb_highlevel *hl)
+{
+ rwlock_init(&hl->host_info_lock);
+ INIT_LIST_HEAD(&hl->host_info_list);
+}
void hpsb_register_highlevel(struct hpsb_highlevel *hl);
void hpsb_unregister_highlevel(struct hpsb_highlevel *hl);
-/*
- * Register handlers for host address spaces. Start and end are 48 bit pointers
- * and have to be quadlet aligned (end points to the first address behind the
- * handled addresses. This function can be called multiple times for a single
- * hpsb_highlevel to implement sparse register sets. The requested region must
- * not overlap any previously allocated region, otherwise registering will fail.
- *
- * It returns true for successful allocation. There is no unregister function,
- * all address spaces are deallocated together with the hpsb_highlevel.
- */
u64 hpsb_allocate_and_register_addrspace(struct hpsb_highlevel *hl,
struct hpsb_host *host,
- struct hpsb_address_ops *ops,
+ const struct hpsb_address_ops *ops,
u64 size, u64 alignment,
u64 start, u64 end);
int hpsb_register_addrspace(struct hpsb_highlevel *hl, struct hpsb_host *host,
- struct hpsb_address_ops *ops, u64 start, u64 end);
-
+ const struct hpsb_address_ops *ops,
+ u64 start, u64 end);
int hpsb_unregister_addrspace(struct hpsb_highlevel *hl, struct hpsb_host *host,
- u64 start);
+ u64 start);
-/*
- * Enable or disable receving a certain isochronous channel through the
- * iso_receive op.
- */
-int hpsb_listen_channel(struct hpsb_highlevel *hl, struct hpsb_host *host,
- unsigned int channel);
-void hpsb_unlisten_channel(struct hpsb_highlevel *hl, struct hpsb_host *host,
- unsigned int channel);
-
-
-/* Retrieve a hostinfo pointer bound to this driver/host */
void *hpsb_get_hostinfo(struct hpsb_highlevel *hl, struct hpsb_host *host);
-
-/* Allocate a hostinfo pointer of data_size bound to this driver/host */
void *hpsb_create_hostinfo(struct hpsb_highlevel *hl, struct hpsb_host *host,
size_t data_size);
-
-/* Free and remove the hostinfo pointer bound to this driver/host */
void hpsb_destroy_hostinfo(struct hpsb_highlevel *hl, struct hpsb_host *host);
-
-/* Set an alternate lookup key for the hostinfo bound to this driver/host */
-void hpsb_set_hostinfo_key(struct hpsb_highlevel *hl, struct hpsb_host *host, unsigned long key);
-
-/* Retrieve the alternate lookup key for the hostinfo bound to this driver/host */
-unsigned long hpsb_get_hostinfo_key(struct hpsb_highlevel *hl, struct hpsb_host *host);
-
-/* Retrieve a hostinfo pointer bound to this driver using its alternate key */
+void hpsb_set_hostinfo_key(struct hpsb_highlevel *hl, struct hpsb_host *host,
+ unsigned long key);
void *hpsb_get_hostinfo_bykey(struct hpsb_highlevel *hl, unsigned long key);
-
-/* Set the hostinfo pointer to something useful. Usually follows a call to
- * hpsb_create_hostinfo, where the size is 0. */
-int hpsb_set_hostinfo(struct hpsb_highlevel *hl, struct hpsb_host *host, void *data);
-
-/* Retrieve hpsb_host using a highlevel handle and a key */
-struct hpsb_host *hpsb_get_host_bykey(struct hpsb_highlevel *hl, unsigned long key);
+int hpsb_set_hostinfo(struct hpsb_highlevel *hl, struct hpsb_host *host,
+ void *data);
#endif /* IEEE1394_HIGHLEVEL_H */
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff