* May be copied or modified under the terms of the GNU General Public License
*/
-#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/init.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/ide.h>
#include <linux/dma-mapping.h>
#include <asm/io.h>
-#include <asm/irq.h>
/**
* ide_setup_pci_baseregs - place a PCI IDE controller native
}
/**
- * ide_get_or_set_dma_base - setup BMIBA
- * @d: IDE port info
+ * ide_pci_dma_base - setup BMIBA
* @hwif: IDE interface
+ * @d: IDE port info
*
* Fetch the DMA Bus-Master-I/O-Base-Address (BMIBA) from PCI space.
- * Where a device has a partner that is already in DMA mode we check
- * and enforce IDE simplex rules.
*/
-static unsigned long ide_get_or_set_dma_base(const struct ide_port_info *d, ide_hwif_t *hwif)
+unsigned long ide_pci_dma_base(ide_hwif_t *hwif, const struct ide_port_info *d)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
unsigned long dma_base = 0;
- u8 dma_stat = 0;
- if (hwif->mmio)
+ if (hwif->host_flags & IDE_HFLAG_MMIO)
return hwif->dma_base;
if (hwif->mate && hwif->mate->dma_base) {
if (hwif->channel)
dma_base += 8;
- if (d->host_flags & IDE_HFLAG_CS5520)
+ return dma_base;
+}
+EXPORT_SYMBOL_GPL(ide_pci_dma_base);
+
+int ide_pci_check_simplex(ide_hwif_t *hwif, const struct ide_port_info *d)
+{
+ u8 dma_stat;
+
+ if (d->host_flags & (IDE_HFLAG_MMIO | IDE_HFLAG_CS5520))
goto out;
if (d->host_flags & IDE_HFLAG_CLEAR_SIMPLEX) {
- ide_pci_clear_simplex(dma_base, d->name);
+ ide_pci_clear_simplex(hwif->dma_base, d->name);
goto out;
}
* we tune the drive then try to grab DMA ownership if we want to be
* the DMA end. This has to be become dynamic to handle hot-plug.
*/
- dma_stat = hwif->INB(dma_base + 2);
+ dma_stat = hwif->read_sff_dma_status(hwif);
if ((dma_stat & 0x80) && hwif->mate && hwif->mate->dma_base) {
printk(KERN_INFO "%s: simplex device: DMA disabled\n", d->name);
- dma_base = 0;
+ return -1;
}
out:
- return dma_base;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ide_pci_check_simplex);
+
+/*
+ * Set up BM-DMA capability (PnP BIOS should have done this)
+ */
+int ide_pci_set_master(struct pci_dev *dev, const char *name)
+{
+ u16 pcicmd;
+
+ pci_read_config_word(dev, PCI_COMMAND, &pcicmd);
+
+ if ((pcicmd & PCI_COMMAND_MASTER) == 0) {
+ pci_set_master(dev);
+
+ if (pci_read_config_word(dev, PCI_COMMAND, &pcicmd) ||
+ (pcicmd & PCI_COMMAND_MASTER) == 0) {
+ printk(KERN_ERR "%s: error updating PCICMD on %s\n",
+ name, pci_name(dev));
+ return -EIO;
+ }
+ }
+
+ return 0;
}
+EXPORT_SYMBOL_GPL(ide_pci_set_master);
#endif /* CONFIG_BLK_DEV_IDEDMA_PCI */
void ide_setup_pci_noise(struct pci_dev *dev, const struct ide_port_info *d)
* @d: IDE port info
* @port: port number
* @irq: PCI IRQ
+ * @hw: hw_regs_t instance corresponding to this port
*
* Perform the initial set up for the hardware interface structure. This
* is done per interface port rather than per PCI device. There may be
static ide_hwif_t *ide_hwif_configure(struct pci_dev *dev,
const struct ide_port_info *d,
- unsigned int port, int irq)
+ unsigned int port, int irq,
+ hw_regs_t *hw)
{
unsigned long ctl = 0, base = 0;
ide_hwif_t *hwif;
- struct hw_regs_s hw;
if ((d->host_flags & IDE_HFLAG_ISA_PORTS) == 0) {
if (ide_pci_check_iomem(dev, d, 2 * port) ||
ctl = pci_resource_start(dev, 2*port+1);
base = pci_resource_start(dev, 2*port);
- if ((ctl && !base) || (base && !ctl)) {
- printk(KERN_ERR "%s: inconsistent baseregs (BIOS) "
- "for port %d, skipping\n", d->name, port);
- return NULL;
- }
- }
- if (!ctl) {
+ } else {
/* Use default values */
ctl = port ? 0x374 : 0x3f4;
base = port ? 0x170 : 0x1f0;
}
- hwif = ide_find_port_slot(d);
- if (hwif == NULL) {
- printk(KERN_ERR "%s: too many IDE interfaces, no room in "
- "table\n", d->name);
+ if (!base || !ctl) {
+ printk(KERN_ERR "%s: bad PCI BARs for port %d, skipping\n",
+ d->name, port);
return NULL;
}
- memset(&hw, 0, sizeof(hw));
- hw.irq = irq;
- hw.dev = &dev->dev;
- hw.chipset = d->chipset ? d->chipset : ide_pci;
- ide_std_init_ports(&hw, base, ctl | 2);
+ memset(hw, 0, sizeof(*hw));
+ hw->irq = irq;
+ hw->dev = &dev->dev;
+ hw->chipset = d->chipset ? d->chipset : ide_pci;
+ ide_std_init_ports(hw, base, ctl | 2);
- ide_init_port_hw(hwif, &hw);
+ hwif = ide_find_port_slot(d);
+ if (hwif == NULL)
+ return NULL;
- hwif->dev = &dev->dev;
+ hwif->chipset = hw->chipset;
return hwif;
}
* state
*/
-void ide_hwif_setup_dma(ide_hwif_t *hwif, const struct ide_port_info *d)
+int ide_hwif_setup_dma(ide_hwif_t *hwif, const struct ide_port_info *d)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
- u16 pcicmd;
-
- pci_read_config_word(dev, PCI_COMMAND, &pcicmd);
if ((d->host_flags & IDE_HFLAG_NO_AUTODMA) == 0 ||
((dev->class >> 8) == PCI_CLASS_STORAGE_IDE &&
(dev->class & 0x80))) {
- unsigned long dma_base = ide_get_or_set_dma_base(d, hwif);
- if (dma_base && !(pcicmd & PCI_COMMAND_MASTER)) {
- /*
- * Set up BM-DMA capability
- * (PnP BIOS should have done this)
- */
- pci_set_master(dev);
- if (pci_read_config_word(dev, PCI_COMMAND, &pcicmd) || !(pcicmd & PCI_COMMAND_MASTER)) {
- printk(KERN_ERR "%s: %s error updating PCICMD\n",
- hwif->name, d->name);
- dma_base = 0;
- }
- }
- if (dma_base) {
- if (d->init_dma) {
- d->init_dma(hwif, dma_base);
- } else {
- ide_setup_dma(hwif, dma_base);
- }
- } else {
- printk(KERN_INFO "%s: %s Bus-Master DMA disabled "
- "(BIOS)\n", hwif->name, d->name);
- }
+ unsigned long base = ide_pci_dma_base(hwif, d);
+
+ if (base == 0)
+ return -1;
+
+ hwif->dma_base = base;
+
+ if (ide_pci_check_simplex(hwif, d) < 0)
+ return -1;
+
+ if (ide_pci_set_master(dev, d->name) < 0)
+ return -1;
+
+ if (hwif->host_flags & IDE_HFLAG_MMIO)
+ printk(KERN_INFO " %s: MMIO-DMA\n", hwif->name);
+ else
+ printk(KERN_INFO " %s: BM-DMA at 0x%04lx-0x%04lx\n",
+ hwif->name, base, base + 7);
+
+ hwif->extra_base = base + (hwif->channel ? 8 : 16);
+
+ if (ide_allocate_dma_engine(hwif))
+ return -1;
+
+ hwif->dma_ops = &sff_dma_ops;
}
+
+ return 0;
}
#endif /* CONFIG_BLK_DEV_IDEDMA_PCI */
* @d: IDE port info
* @pciirq: IRQ line
* @idx: ATA index table to update
+ * @hw: hw_regs_t instances corresponding to this PCI IDE device
+ * @hws: hw_regs_t pointers table to update
*
* Scan the interfaces attached to this device and do any
* necessary per port setup. Attach the devices and ask the
* where the chipset setup is not the default PCI IDE one.
*/
-void ide_pci_setup_ports(struct pci_dev *dev, const struct ide_port_info *d, int pciirq, u8 *idx)
+void ide_pci_setup_ports(struct pci_dev *dev, const struct ide_port_info *d,
+ int pciirq, u8 *idx, hw_regs_t *hw, hw_regs_t **hws)
{
int channels = (d->host_flags & IDE_HFLAG_SINGLE) ? 1 : 2, port;
ide_hwif_t *hwif;
continue; /* port not enabled */
}
- hwif = ide_hwif_configure(dev, d, port, pciirq);
+ hwif = ide_hwif_configure(dev, d, port, pciirq, hw + port);
if (hwif == NULL)
continue;
+ *(hws + port) = hw + port;
*(idx + port) = hwif->index;
}
}
*/
static int do_ide_setup_pci_device(struct pci_dev *dev,
const struct ide_port_info *d,
- u8 *idx, u8 noisy)
+ u8 noisy)
{
int tried_config = 0;
int pciirq, ret;
d->name, pciirq);
}
- /* FIXME: silent failure can happen */
-
- ide_pci_setup_ports(dev, d, pciirq, idx);
+ ret = pciirq;
out:
return ret;
}
int ide_setup_pci_device(struct pci_dev *dev, const struct ide_port_info *d)
{
u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
+ hw_regs_t hw[4], *hws[] = { NULL, NULL, NULL, NULL };
int ret;
- ret = do_ide_setup_pci_device(dev, d, &idx[0], 1);
+ ret = do_ide_setup_pci_device(dev, d, 1);
+
+ if (ret >= 0) {
+ /* FIXME: silent failure can happen */
+ ide_pci_setup_ports(dev, d, ret, &idx[0], &hw[0], &hws[0]);
- if (ret >= 0)
- ide_device_add(idx, d);
+ ide_device_add(idx, d, hws);
+ }
return ret;
}
{
struct pci_dev *pdev[] = { dev1, dev2 };
int ret, i;
+ hw_regs_t hw[4], *hws[] = { NULL, NULL, NULL, NULL };
u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
for (i = 0; i < 2; i++) {
- ret = do_ide_setup_pci_device(pdev[i], d, &idx[i*2], !i);
+ ret = do_ide_setup_pci_device(pdev[i], d, !i);
+
/*
* FIXME: Mom, mom, they stole me the helper function to undo
* do_ide_setup_pci_device() on the first device!
*/
if (ret < 0)
goto out;
+
+ /* FIXME: silent failure can happen */
+ ide_pci_setup_ports(pdev[i], d, ret, &idx[i*2], &hw[i*2],
+ &hws[i*2]);
}
- ide_device_add(idx, d);
+ ide_device_add(idx, d, hws);
out:
return ret;
}
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff