/*
- * linux/drivers/ide/ide-pmac.c
- *
* Support for IDE interfaces on PowerMacs.
+ *
* These IDE interfaces are memory-mapped and have a DBDMA channel
* for doing DMA.
*
* Copyright (C) 1998-2003 Paul Mackerras & Ben. Herrenschmidt
+ * Copyright (C) 2007 Bartlomiej Zolnierkiewicz
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
*/
#include <linux/types.h>
#include <linux/kernel.h>
-#include <linux/sched.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/ide.h>
#include <asm/mediabay.h>
#endif
-#include "ide-timing.h"
+#include "../ide-timing.h"
#undef IDE_PMAC_DEBUG
} pmac_ide_hwif_t;
static pmac_ide_hwif_t pmac_ide[MAX_HWIFS];
-static int pmac_ide_count;
enum {
controller_ohare, /* OHare based */
{ 240 , 0x0800038b },
{ 239 , 0x0800030c },
{ 180 , 0x05000249 },
- { 120 , 0x04000148 }
+ { 120 , 0x04000148 },
+ { 0 , 0 },
};
static struct kauai_timing kauai_mdma_timings[] =
{ 240 , 0x040003cd },
{ 239 , 0x040003cd },
{ 180 , 0x0400028b },
- { 120 , 0x0400010a }
+ { 120 , 0x0400010a },
+ { 0 , 0 },
};
static struct kauai_timing shasta_mdma_timings[] =
for (i=0; table[i].cycle_time; i++)
if (cycle_time > table[i+1].cycle_time)
return table[i].timing_reg;
+ BUG();
return 0;
}
*/
#define IDE_WAKEUP_DELAY (1*HZ)
-static void pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif);
+static int pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif);
static int pmac_ide_build_dmatable(ide_drive_t *drive, struct request *rq);
-static int pmac_ide_tune_chipset(ide_drive_t *drive, u8 speed);
-static void pmac_ide_tuneproc(ide_drive_t *drive, u8 pio);
static void pmac_ide_selectproc(ide_drive_t *drive);
static void pmac_ide_kauai_selectproc(ide_drive_t *drive);
#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
-/*
- * N.B. this can't be an initfunc, because the media-bay task can
- * call ide_[un]register at any time.
- */
-void
-pmac_ide_init_hwif_ports(hw_regs_t *hw,
- unsigned long data_port, unsigned long ctrl_port,
- int *irq)
-{
- int i, ix;
-
- if (data_port == 0)
- return;
-
- for (ix = 0; ix < MAX_HWIFS; ++ix)
- if (data_port == pmac_ide[ix].regbase)
- break;
-
- if (ix >= MAX_HWIFS) {
- /* Probably a PCI interface... */
- for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; ++i)
- hw->io_ports[i] = data_port + i - IDE_DATA_OFFSET;
- hw->io_ports[IDE_CONTROL_OFFSET] = ctrl_port;
- return;
- }
-
- for (i = 0; i < 8; ++i)
- hw->io_ports[i] = data_port + i * 0x10;
- hw->io_ports[8] = data_port + 0x160;
-
- if (irq != NULL)
- *irq = pmac_ide[ix].irq;
-
- hw->dev = &pmac_ide[ix].mdev->ofdev.dev;
-}
-
-#define PMAC_IDE_REG(x) ((void __iomem *)(IDE_DATA_REG+(x)))
+#define PMAC_IDE_REG(x) \
+ ((void __iomem *)((drive)->hwif->io_ports[IDE_DATA_OFFSET] + (x)))
/*
* Apply the timings of the proper unit (master/slave) to the shared
}
/*
- * Send the SET_FEATURE IDE command to the drive and update drive->id with
- * the new state. We currently don't use the generic routine as it used to
- * cause various trouble, especially with older mediabays.
- * This code is sometimes triggering a spurrious interrupt though, I need
- * to sort that out sooner or later and see if I can finally get the
- * common version to work properly in all cases
- */
-static int
-pmac_ide_do_setfeature(ide_drive_t *drive, u8 command)
-{
- ide_hwif_t *hwif = HWIF(drive);
- int result = 1;
-
- disable_irq_nosync(hwif->irq);
- udelay(1);
- SELECT_DRIVE(drive);
- SELECT_MASK(drive, 0);
- udelay(1);
- /* Get rid of pending error state */
- (void) hwif->INB(IDE_STATUS_REG);
- /* Timeout bumped for some powerbooks */
- if (wait_for_ready(drive, 2000)) {
- /* Timeout bumped for some powerbooks */
- printk(KERN_ERR "%s: pmac_ide_do_setfeature disk not ready "
- "before SET_FEATURE!\n", drive->name);
- goto out;
- }
- udelay(10);
- hwif->OUTB(drive->ctl | 2, IDE_CONTROL_REG);
- hwif->OUTB(command, IDE_NSECTOR_REG);
- hwif->OUTB(SETFEATURES_XFER, IDE_FEATURE_REG);
- hwif->OUTBSYNC(drive, WIN_SETFEATURES, IDE_COMMAND_REG);
- udelay(1);
- /* Timeout bumped for some powerbooks */
- result = wait_for_ready(drive, 2000);
- hwif->OUTB(drive->ctl, IDE_CONTROL_REG);
- if (result)
- printk(KERN_ERR "%s: pmac_ide_do_setfeature disk not ready "
- "after SET_FEATURE !\n", drive->name);
-out:
- SELECT_MASK(drive, 0);
- if (result == 0) {
- drive->id->dma_ultra &= ~0xFF00;
- drive->id->dma_mword &= ~0x0F00;
- drive->id->dma_1word &= ~0x0F00;
- switch(command) {
- case XFER_UDMA_7:
- drive->id->dma_ultra |= 0x8080; break;
- case XFER_UDMA_6:
- drive->id->dma_ultra |= 0x4040; break;
- case XFER_UDMA_5:
- drive->id->dma_ultra |= 0x2020; break;
- case XFER_UDMA_4:
- drive->id->dma_ultra |= 0x1010; break;
- case XFER_UDMA_3:
- drive->id->dma_ultra |= 0x0808; break;
- case XFER_UDMA_2:
- drive->id->dma_ultra |= 0x0404; break;
- case XFER_UDMA_1:
- drive->id->dma_ultra |= 0x0202; break;
- case XFER_UDMA_0:
- drive->id->dma_ultra |= 0x0101; break;
- case XFER_MW_DMA_2:
- drive->id->dma_mword |= 0x0404; break;
- case XFER_MW_DMA_1:
- drive->id->dma_mword |= 0x0202; break;
- case XFER_MW_DMA_0:
- drive->id->dma_mword |= 0x0101; break;
- case XFER_SW_DMA_2:
- drive->id->dma_1word |= 0x0404; break;
- case XFER_SW_DMA_1:
- drive->id->dma_1word |= 0x0202; break;
- case XFER_SW_DMA_0:
- drive->id->dma_1word |= 0x0101; break;
- default: break;
- }
- }
- enable_irq(hwif->irq);
- return result;
-}
-
-/*
* Old tuning functions (called on hdparm -p), sets up drive PIO timings
*/
static void
-pmac_ide_tuneproc(ide_drive_t *drive, u8 pio)
+pmac_ide_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- ide_pio_data_t d;
- u32 *timings;
+ u32 *timings, t;
unsigned accessTicks, recTicks;
unsigned accessTime, recTime;
pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)HWIF(drive)->hwif_data;
-
+ unsigned int cycle_time;
+
if (pmif == NULL)
return;
/* which drive is it ? */
timings = &pmif->timings[drive->select.b.unit & 0x01];
+ t = *timings;
- pio = ide_get_best_pio_mode(drive, pio, 4, &d);
+ cycle_time = ide_pio_cycle_time(drive, pio);
switch (pmif->kind) {
case controller_sh_ata6: {
/* 133Mhz cell */
- u32 tr = kauai_lookup_timing(shasta_pio_timings, d.cycle_time);
- if (tr == 0)
- return;
- *timings = ((*timings) & ~TR_133_PIOREG_PIO_MASK) | tr;
+ u32 tr = kauai_lookup_timing(shasta_pio_timings, cycle_time);
+ t = (t & ~TR_133_PIOREG_PIO_MASK) | tr;
break;
}
case controller_un_ata6:
case controller_k2_ata6: {
/* 100Mhz cell */
- u32 tr = kauai_lookup_timing(kauai_pio_timings, d.cycle_time);
- if (tr == 0)
- return;
- *timings = ((*timings) & ~TR_100_PIOREG_PIO_MASK) | tr;
+ u32 tr = kauai_lookup_timing(kauai_pio_timings, cycle_time);
+ t = (t & ~TR_100_PIOREG_PIO_MASK) | tr;
break;
}
case controller_kl_ata4:
/* 66Mhz cell */
- recTime = d.cycle_time - ide_pio_timings[pio].active_time
+ recTime = cycle_time - ide_pio_timings[pio].active_time
- ide_pio_timings[pio].setup_time;
recTime = max(recTime, 150U);
accessTime = ide_pio_timings[pio].active_time;
accessTicks = min(accessTicks, 0x1fU);
recTicks = SYSCLK_TICKS_66(recTime);
recTicks = min(recTicks, 0x1fU);
- *timings = ((*timings) & ~TR_66_PIO_MASK) |
- (accessTicks << TR_66_PIO_ACCESS_SHIFT) |
- (recTicks << TR_66_PIO_RECOVERY_SHIFT);
+ t = (t & ~TR_66_PIO_MASK) |
+ (accessTicks << TR_66_PIO_ACCESS_SHIFT) |
+ (recTicks << TR_66_PIO_RECOVERY_SHIFT);
break;
default: {
/* 33Mhz cell */
int ebit = 0;
- recTime = d.cycle_time - ide_pio_timings[pio].active_time
+ recTime = cycle_time - ide_pio_timings[pio].active_time
- ide_pio_timings[pio].setup_time;
recTime = max(recTime, 150U);
accessTime = ide_pio_timings[pio].active_time;
recTicks--; /* guess, but it's only for PIO0, so... */
ebit = 1;
}
- *timings = ((*timings) & ~TR_33_PIO_MASK) |
+ t = (t & ~TR_33_PIO_MASK) |
(accessTicks << TR_33_PIO_ACCESS_SHIFT) |
(recTicks << TR_33_PIO_RECOVERY_SHIFT);
if (ebit)
- *timings |= TR_33_PIO_E;
+ t |= TR_33_PIO_E;
break;
}
}
drive->name, pio, *timings);
#endif
- if (drive->select.all == HWIF(drive)->INB(IDE_SELECT_REG))
- pmac_ide_do_update_timings(drive);
+ *timings = t;
+ pmac_ide_do_update_timings(drive);
}
#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
if (speed > XFER_UDMA_5 || t == NULL)
return 1;
tr = kauai_lookup_timing(kauai_udma_timings, (int)t->udma);
- if (tr == 0)
- return 1;
*ultra_timings = ((*ultra_timings) & ~TR_100_UDMAREG_UDMA_MASK) | tr;
*ultra_timings = (*ultra_timings) | TR_100_UDMAREG_UDMA_EN;
if (speed > XFER_UDMA_6 || t == NULL)
return 1;
tr = kauai_lookup_timing(shasta_udma133_timings, (int)t->udma);
- if (tr == 0)
- return 1;
*ultra_timings = ((*ultra_timings) & ~TR_133_UDMAREG_UDMA_MASK) | tr;
*ultra_timings = (*ultra_timings) | TR_133_UDMAREG_UDMA_EN;
/*
* Calculate MDMA timings for all cells
*/
-static int
+static void
set_timings_mdma(ide_drive_t *drive, int intf_type, u32 *timings, u32 *timings2,
- u8 speed, int drive_cycle_time)
+ u8 speed)
{
int cycleTime, accessTime = 0, recTime = 0;
unsigned accessTicks, recTicks;
+ struct hd_driveid *id = drive->id;
struct mdma_timings_t* tm = NULL;
int i;
case 1: cycleTime = 150; break;
case 2: cycleTime = 120; break;
default:
- return 1;
+ BUG();
+ break;
}
- /* Adjust for drive */
- if (drive_cycle_time && drive_cycle_time > cycleTime)
- cycleTime = drive_cycle_time;
+
+ /* Check if drive provides explicit DMA cycle time */
+ if ((id->field_valid & 2) && id->eide_dma_time)
+ cycleTime = max_t(int, id->eide_dma_time, cycleTime);
+
/* OHare limits according to some old Apple sources */
if ((intf_type == controller_ohare) && (cycleTime < 150))
cycleTime = 150;
break;
i++;
}
- if (i < 0)
- return 1;
cycleTime = tm[i].cycleTime;
accessTime = tm[i].accessTime;
recTime = tm[i].recoveryTime;
case controller_sh_ata6: {
/* 133Mhz cell */
u32 tr = kauai_lookup_timing(shasta_mdma_timings, cycleTime);
- if (tr == 0)
- return 1;
*timings = ((*timings) & ~TR_133_PIOREG_MDMA_MASK) | tr;
*timings2 = (*timings2) & ~TR_133_UDMAREG_UDMA_EN;
}
case controller_k2_ata6: {
/* 100Mhz cell */
u32 tr = kauai_lookup_timing(kauai_mdma_timings, cycleTime);
- if (tr == 0)
- return 1;
*timings = ((*timings) & ~TR_100_PIOREG_MDMA_MASK) | tr;
*timings2 = (*timings2) & ~TR_100_UDMAREG_UDMA_EN;
}
printk(KERN_ERR "%s: Set MDMA timing for mode %d, reg: 0x%08x\n",
drive->name, speed & 0xf, *timings);
#endif
- return 0;
}
#endif /* #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC */
-/*
- * Speedproc. This function is called by the core to set any of the standard
- * timing (PIO, MDMA or UDMA) to both the drive and the controller.
- * You may notice we don't use this function on normal "dma check" operation,
- * our dedicated function is more precise as it uses the drive provided
- * cycle time value. We should probably fix this one to deal with that too...
- */
-static int
-pmac_ide_tune_chipset (ide_drive_t *drive, byte speed)
+static void pmac_ide_set_dma_mode(ide_drive_t *drive, const u8 speed)
{
int unit = (drive->select.b.unit & 0x01);
int ret = 0;
pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)HWIF(drive)->hwif_data;
- u32 *timings, *timings2;
+ u32 *timings, *timings2, tl[2];
- if (pmif == NULL)
- return 1;
-
timings = &pmif->timings[unit];
timings2 = &pmif->timings[unit+2];
-
- switch(speed) {
+
+ /* Copy timings to local image */
+ tl[0] = *timings;
+ tl[1] = *timings2;
+
#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
- case XFER_UDMA_6:
- if (pmif->kind != controller_sh_ata6)
- return 1;
- case XFER_UDMA_5:
- if (pmif->kind != controller_un_ata6 &&
- pmif->kind != controller_k2_ata6 &&
- pmif->kind != controller_sh_ata6)
- return 1;
- case XFER_UDMA_4:
- case XFER_UDMA_3:
- if (HWIF(drive)->udma_four == 0)
- return 1;
- case XFER_UDMA_2:
- case XFER_UDMA_1:
- case XFER_UDMA_0:
- if (pmif->kind == controller_kl_ata4)
- ret = set_timings_udma_ata4(timings, speed);
- else if (pmif->kind == controller_un_ata6
- || pmif->kind == controller_k2_ata6)
- ret = set_timings_udma_ata6(timings, timings2, speed);
- else if (pmif->kind == controller_sh_ata6)
- ret = set_timings_udma_shasta(timings, timings2, speed);
- else
- ret = 1;
- break;
- case XFER_MW_DMA_2:
- case XFER_MW_DMA_1:
- case XFER_MW_DMA_0:
- ret = set_timings_mdma(drive, pmif->kind, timings, timings2, speed, 0);
- break;
- case XFER_SW_DMA_2:
- case XFER_SW_DMA_1:
- case XFER_SW_DMA_0:
- return 1;
+ if (speed >= XFER_UDMA_0) {
+ if (pmif->kind == controller_kl_ata4)
+ ret = set_timings_udma_ata4(&tl[0], speed);
+ else if (pmif->kind == controller_un_ata6
+ || pmif->kind == controller_k2_ata6)
+ ret = set_timings_udma_ata6(&tl[0], &tl[1], speed);
+ else if (pmif->kind == controller_sh_ata6)
+ ret = set_timings_udma_shasta(&tl[0], &tl[1], speed);
+ else
+ ret = -1;
+ } else
+ set_timings_mdma(drive, pmif->kind, &tl[0], &tl[1], speed);
#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
- case XFER_PIO_4:
- case XFER_PIO_3:
- case XFER_PIO_2:
- case XFER_PIO_1:
- case XFER_PIO_0:
- pmac_ide_tuneproc(drive, speed & 0x07);
- break;
- default:
- ret = 1;
- }
if (ret)
- return ret;
+ return;
- ret = pmac_ide_do_setfeature(drive, speed);
- if (ret)
- return ret;
-
- pmac_ide_do_update_timings(drive);
- drive->current_speed = speed;
+ /* Apply timings to controller */
+ *timings = tl[0];
+ *timings2 = tl[1];
- return 0;
+ pmac_ide_do_update_timings(drive);
}
/*
pmif->timings[2] = pmif->timings[3] = value2;
}
-unsigned long
-pmac_ide_get_base(int index)
-{
- return pmac_ide[index].regbase;
-}
-
-int
-pmac_ide_check_base(unsigned long base)
-{
- int ix;
-
- for (ix = 0; ix < MAX_HWIFS; ++ix)
- if (base == pmac_ide[ix].regbase)
- return ix;
- return -1;
-}
-
-int
-pmac_ide_get_irq(unsigned long base)
-{
- int ix;
-
- for (ix = 0; ix < MAX_HWIFS; ++ix)
- if (base == pmac_ide[ix].regbase)
- return pmac_ide[ix].irq;
- return 0;
-}
-
-static int ide_majors[] = { 3, 22, 33, 34, 56, 57 };
-
-dev_t __init
-pmac_find_ide_boot(char *bootdevice, int n)
-{
- int i;
-
- /*
- * Look through the list of IDE interfaces for this one.
- */
- for (i = 0; i < pmac_ide_count; ++i) {
- char *name;
- if (!pmac_ide[i].node || !pmac_ide[i].node->full_name)
- continue;
- name = pmac_ide[i].node->full_name;
- if (memcmp(name, bootdevice, n) == 0 && name[n] == 0) {
- /* XXX should cope with the 2nd drive as well... */
- return MKDEV(ide_majors[i], 0);
- }
- }
-
- return 0;
-}
-
/* Suspend call back, should be called after the child devices
* have actually been suspended
*/
return 0;
}
+static const struct ide_port_info pmac_port_info = {
+ .chipset = ide_pmac,
+ .host_flags = IDE_HFLAG_SET_PIO_MODE_KEEP_DMA |
+ IDE_HFLAG_PIO_NO_DOWNGRADE |
+ IDE_HFLAG_POST_SET_MODE |
+ IDE_HFLAG_NO_DMA | /* no SFF-style DMA */
+ IDE_HFLAG_UNMASK_IRQS,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+};
+
/*
* Setup, register & probe an IDE channel driven by this driver, this is
* called by one of the 2 probe functions (macio or PCI). Note that a channel
* (it is kept in 2.4). This introduce an interface numbering change on some
* rare machines unfortunately, but it's better this way.
*/
-static int
-pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif)
+static int __devinit
+pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw)
{
struct device_node *np = pmif->node;
- int *bidp;
+ const int *bidp;
+ u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
+ struct ide_port_info d = pmac_port_info;
pmif->cable_80 = 0;
pmif->broken_dma = pmif->broken_dma_warn = 0;
- if (device_is_compatible(np, "shasta-ata"))
+ if (of_device_is_compatible(np, "shasta-ata")) {
pmif->kind = controller_sh_ata6;
- else if (device_is_compatible(np, "kauai-ata"))
+ d.udma_mask = ATA_UDMA6;
+ } else if (of_device_is_compatible(np, "kauai-ata")) {
pmif->kind = controller_un_ata6;
- else if (device_is_compatible(np, "K2-UATA"))
+ d.udma_mask = ATA_UDMA5;
+ } else if (of_device_is_compatible(np, "K2-UATA")) {
pmif->kind = controller_k2_ata6;
- else if (device_is_compatible(np, "keylargo-ata")) {
- if (strcmp(np->name, "ata-4") == 0)
+ d.udma_mask = ATA_UDMA5;
+ } else if (of_device_is_compatible(np, "keylargo-ata")) {
+ if (strcmp(np->name, "ata-4") == 0) {
pmif->kind = controller_kl_ata4;
- else
+ d.udma_mask = ATA_UDMA4;
+ } else
pmif->kind = controller_kl_ata3;
- } else if (device_is_compatible(np, "heathrow-ata"))
+ } else if (of_device_is_compatible(np, "heathrow-ata")) {
pmif->kind = controller_heathrow;
- else {
+ } else {
pmif->kind = controller_ohare;
pmif->broken_dma = 1;
}
- bidp = (int *)get_property(np, "AAPL,bus-id", NULL);
+ bidp = of_get_property(np, "AAPL,bus-id", NULL);
pmif->aapl_bus_id = bidp ? *bidp : 0;
/* Get cable type from device-tree */
if (pmif->kind == controller_kl_ata4 || pmif->kind == controller_un_ata6
|| pmif->kind == controller_k2_ata6
|| pmif->kind == controller_sh_ata6) {
- char* cable = get_property(np, "cable-type", NULL);
+ const char* cable = of_get_property(np, "cable-type", NULL);
if (cable && !strncmp(cable, "80-", 3))
pmif->cable_80 = 1;
}
* they have a 80 conductor cable, this seem to be always the case unless
* the user mucked around
*/
- if (device_is_compatible(np, "K2-UATA") ||
- device_is_compatible(np, "shasta-ata"))
+ if (of_device_is_compatible(np, "K2-UATA") ||
+ of_device_is_compatible(np, "shasta-ata"))
pmif->cable_80 = 1;
/* On Kauai-type controllers, we make sure the FCR is correct */
if (np->parent && np->parent->name
&& strcasecmp(np->parent->name, "media-bay") == 0) {
#ifdef CONFIG_PMAC_MEDIABAY
- media_bay_set_ide_infos(np->parent, pmif->regbase, pmif->irq, hwif->index);
+ media_bay_set_ide_infos(np->parent, pmif->regbase, pmif->irq,
+ hwif);
#endif /* CONFIG_PMAC_MEDIABAY */
pmif->mediabay = 1;
if (!bidp)
hwif->OUTBSYNC = pmac_outbsync;
/* Tell common code _not_ to mess with resources */
- hwif->mmio = 2;
+ hwif->mmio = 1;
hwif->hwif_data = pmif;
- pmac_ide_init_hwif_ports(&hwif->hw, pmif->regbase, 0, &hwif->irq);
- memcpy(hwif->io_ports, hwif->hw.io_ports, sizeof(hwif->io_ports));
- hwif->chipset = ide_pmac;
- hwif->noprobe = !hwif->io_ports[IDE_DATA_OFFSET] || pmif->mediabay;
- hwif->hold = pmif->mediabay;
- hwif->udma_four = pmif->cable_80;
- hwif->drives[0].unmask = 1;
- hwif->drives[1].unmask = 1;
- hwif->tuneproc = pmac_ide_tuneproc;
+ ide_init_port_hw(hwif, hw);
+ hwif->noprobe = pmif->mediabay;
+ hwif->cbl = pmif->cable_80 ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
+ hwif->set_pio_mode = pmac_ide_set_pio_mode;
if (pmif->kind == controller_un_ata6
|| pmif->kind == controller_k2_ata6
|| pmif->kind == controller_sh_ata6)
hwif->selectproc = pmac_ide_kauai_selectproc;
else
hwif->selectproc = pmac_ide_selectproc;
- hwif->speedproc = pmac_ide_tune_chipset;
+ hwif->set_dma_mode = pmac_ide_set_dma_mode;
printk(KERN_INFO "ide%d: Found Apple %s controller, bus ID %d%s, irq %d\n",
hwif->index, model_name[pmif->kind], pmif->aapl_bus_id,
hwif->noprobe = 0;
#endif /* CONFIG_PMAC_MEDIABAY */
- hwif->sg_max_nents = MAX_DCMDS;
-
#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
+ if (pmif->cable_80 == 0)
+ d.udma_mask &= ATA_UDMA2;
/* has a DBDMA controller channel */
- if (pmif->dma_regs)
- pmac_ide_setup_dma(pmif, hwif);
-#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
+ if (pmif->dma_regs == 0 || pmac_ide_setup_dma(pmif, hwif) < 0)
+#endif
+ d.udma_mask = d.mwdma_mask = 0;
+
+ idx[0] = hwif->index;
- /* We probe the hwif now */
- probe_hwif_init(hwif);
+ ide_device_add(idx, &d);
return 0;
}
+static void __devinit pmac_ide_init_ports(hw_regs_t *hw, unsigned long base)
+{
+ int i;
+
+ for (i = 0; i < 8; ++i)
+ hw->io_ports[i] = base + i * 0x10;
+ hw->io_ports[8] = base + 0x160;
+}
+
/*
* Attach to a macio probed interface
*/
ide_hwif_t *hwif;
pmac_ide_hwif_t *pmif;
int i, rc;
+ hw_regs_t hw;
i = 0;
while (i < MAX_HWIFS && (ide_hwifs[i].io_ports[IDE_DATA_OFFSET] != 0
if (macio_irq_count(mdev) == 0) {
printk(KERN_WARNING "ide%d: no intrs for device %s, using 13\n",
i, mdev->ofdev.node->full_name);
- irq = 13;
+ irq = irq_create_mapping(NULL, 13);
} else
irq = macio_irq(mdev, 0);
base = ioremap(macio_resource_start(mdev, 0), 0x400);
regbase = (unsigned long) base;
- hwif->pci_dev = mdev->bus->pdev;
- hwif->gendev.parent = &mdev->ofdev.dev;
+ hwif->dev = &mdev->bus->pdev->dev;
pmif->mdev = mdev;
pmif->node = mdev->ofdev.node;
#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
dev_set_drvdata(&mdev->ofdev.dev, hwif);
- rc = pmac_ide_setup_device(pmif, hwif);
+ memset(&hw, 0, sizeof(hw));
+ pmac_ide_init_ports(&hw, pmif->regbase);
+ hw.irq = irq;
+ hw.dev = &mdev->ofdev.dev;
+
+ rc = pmac_ide_setup_device(pmif, hwif, &hw);
if (rc != 0) {
/* The inteface is released to the common IDE layer */
dev_set_drvdata(&mdev->ofdev.dev, NULL);
iounmap(base);
- if (pmif->dma_regs)
+ if (pmif->dma_regs) {
iounmap(pmif->dma_regs);
+ macio_release_resource(mdev, 1);
+ }
memset(pmif, 0, sizeof(*pmif));
macio_release_resource(mdev, 0);
- if (pmif->dma_regs)
- macio_release_resource(mdev, 1);
}
return rc;
}
static int
-pmac_ide_macio_suspend(struct macio_dev *mdev, pm_message_t state)
+pmac_ide_macio_suspend(struct macio_dev *mdev, pm_message_t mesg)
{
ide_hwif_t *hwif = (ide_hwif_t *)dev_get_drvdata(&mdev->ofdev.dev);
int rc = 0;
- if (state.event != mdev->ofdev.dev.power.power_state.event && state.event >= PM_EVENT_SUSPEND) {
+ if (mesg.event != mdev->ofdev.dev.power.power_state.event
+ && (mesg.event & PM_EVENT_SLEEP)) {
rc = pmac_ide_do_suspend(hwif);
if (rc == 0)
- mdev->ofdev.dev.power.power_state = state;
+ mdev->ofdev.dev.power.power_state = mesg;
}
return rc;
void __iomem *base;
unsigned long rbase, rlen;
int i, rc;
+ hw_regs_t hw;
np = pci_device_to_OF_node(pdev);
if (np == NULL) {
return -ENXIO;
}
- hwif->pci_dev = pdev;
- hwif->gendev.parent = &pdev->dev;
+ hwif->dev = &pdev->dev;
pmif->mdev = NULL;
pmif->node = np;
pci_set_drvdata(pdev, hwif);
- rc = pmac_ide_setup_device(pmif, hwif);
+ memset(&hw, 0, sizeof(hw));
+ pmac_ide_init_ports(&hw, pmif->regbase);
+ hw.irq = pdev->irq;
+ hw.dev = &pdev->dev;
+
+ rc = pmac_ide_setup_device(pmif, hwif, &hw);
if (rc != 0) {
/* The inteface is released to the common IDE layer */
pci_set_drvdata(pdev, NULL);
}
static int
-pmac_ide_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+pmac_ide_pci_suspend(struct pci_dev *pdev, pm_message_t mesg)
{
ide_hwif_t *hwif = (ide_hwif_t *)pci_get_drvdata(pdev);
int rc = 0;
- if (state.event != pdev->dev.power.power_state.event && state.event >= 2) {
+ if (mesg.event != pdev->dev.power.power_state.event
+ && (mesg.event & PM_EVENT_SLEEP)) {
rc = pmac_ide_do_suspend(hwif);
if (rc == 0)
- pdev->dev.power.power_state = state;
+ pdev->dev.power.power_state = mesg;
}
return rc;
.resume = pmac_ide_macio_resume,
};
-static struct pci_device_id pmac_ide_pci_match[] = {
- { PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_UNI_N_ATA,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- { PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_IPID_ATA100,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- { PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_K2_ATA100,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- { PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_SH_ATA,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- { PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_IPID2_ATA,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+static const struct pci_device_id pmac_ide_pci_match[] = {
+ { PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_UNI_N_ATA), 0 },
+ { PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_IPID_ATA100), 0 },
+ { PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_K2_ATA100), 0 },
+ { PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_SH_ATA), 0 },
+ { PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_IPID2_ATA), 0 },
+ {},
};
static struct pci_driver pmac_ide_pci_driver = {
};
MODULE_DEVICE_TABLE(pci, pmac_ide_pci_match);
-void __init
-pmac_ide_probe(void)
+int __init pmac_ide_probe(void)
{
+ int error;
+
if (!machine_is(powermac))
- return;
+ return -ENODEV;
#ifdef CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST
- pci_register_driver(&pmac_ide_pci_driver);
- macio_register_driver(&pmac_ide_macio_driver);
+ error = pci_register_driver(&pmac_ide_pci_driver);
+ if (error)
+ goto out;
+ error = macio_register_driver(&pmac_ide_macio_driver);
+ if (error) {
+ pci_unregister_driver(&pmac_ide_pci_driver);
+ goto out;
+ }
#else
- macio_register_driver(&pmac_ide_macio_driver);
- pci_register_driver(&pmac_ide_pci_driver);
+ error = macio_register_driver(&pmac_ide_macio_driver);
+ if (error)
+ goto out;
+ error = pci_register_driver(&pmac_ide_pci_driver);
+ if (error) {
+ macio_unregister_driver(&pmac_ide_macio_driver);
+ goto out;
+ }
#endif
+out:
+ return error;
}
#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
if (pmif->broken_dma && cur_addr & (L1_CACHE_BYTES - 1)) {
if (pmif->broken_dma_warn == 0) {
- printk(KERN_WARNING "%s: DMA on non aligned address,"
+ printk(KERN_WARNING "%s: DMA on non aligned address, "
"switching to PIO on Ohare chipset\n", drive->name);
pmif->broken_dma_warn = 1;
}
cur_len -= tc;
++table;
}
- sg++;
+ sg = sg_next(sg);
i--;
}
}
printk(KERN_DEBUG "%s: empty DMA table?\n", drive->name);
- use_pio_instead:
- pci_unmap_sg(hwif->pci_dev,
- hwif->sg_table,
- hwif->sg_nents,
- hwif->sg_dma_direction);
+
+use_pio_instead:
+ ide_destroy_dmatable(drive);
+
return 0; /* revert to PIO for this request */
}
pmac_ide_destroy_dmatable (ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
- struct pci_dev *dev = HWIF(drive)->pci_dev;
- struct scatterlist *sg = hwif->sg_table;
- int nents = hwif->sg_nents;
- if (nents) {
- pci_unmap_sg(dev, sg, nents, hwif->sg_dma_direction);
+ if (hwif->sg_nents) {
+ ide_destroy_dmatable(drive);
hwif->sg_nents = 0;
}
}
/*
- * Pick up best MDMA timing for the drive and apply it
- */
-static int
-pmac_ide_mdma_enable(ide_drive_t *drive, u16 mode)
-{
- ide_hwif_t *hwif = HWIF(drive);
- pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)hwif->hwif_data;
- int drive_cycle_time;
- struct hd_driveid *id = drive->id;
- u32 *timings, *timings2;
- u32 timing_local[2];
- int ret;
-
- /* which drive is it ? */
- timings = &pmif->timings[drive->select.b.unit & 0x01];
- timings2 = &pmif->timings[(drive->select.b.unit & 0x01) + 2];
-
- /* Check if drive provide explicit cycle time */
- if ((id->field_valid & 2) && (id->eide_dma_time))
- drive_cycle_time = id->eide_dma_time;
- else
- drive_cycle_time = 0;
-
- /* Copy timings to local image */
- timing_local[0] = *timings;
- timing_local[1] = *timings2;
-
- /* Calculate controller timings */
- ret = set_timings_mdma( drive, pmif->kind,
- &timing_local[0],
- &timing_local[1],
- mode,
- drive_cycle_time);
- if (ret)
- return 0;
-
- /* Set feature on drive */
- printk(KERN_INFO "%s: Enabling MultiWord DMA %d\n", drive->name, mode & 0xf);
- ret = pmac_ide_do_setfeature(drive, mode);
- if (ret) {
- printk(KERN_WARNING "%s: Failed !\n", drive->name);
- return 0;
- }
-
- /* Apply timings to controller */
- *timings = timing_local[0];
- *timings2 = timing_local[1];
-
- /* Set speed info in drive */
- drive->current_speed = mode;
- if (!drive->init_speed)
- drive->init_speed = mode;
-
- return 1;
-}
-
-/*
- * Pick up best UDMA timing for the drive and apply it
- */
-static int
-pmac_ide_udma_enable(ide_drive_t *drive, u16 mode)
-{
- ide_hwif_t *hwif = HWIF(drive);
- pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)hwif->hwif_data;
- u32 *timings, *timings2;
- u32 timing_local[2];
- int ret;
-
- /* which drive is it ? */
- timings = &pmif->timings[drive->select.b.unit & 0x01];
- timings2 = &pmif->timings[(drive->select.b.unit & 0x01) + 2];
-
- /* Copy timings to local image */
- timing_local[0] = *timings;
- timing_local[1] = *timings2;
-
- /* Calculate timings for interface */
- if (pmif->kind == controller_un_ata6
- || pmif->kind == controller_k2_ata6)
- ret = set_timings_udma_ata6( &timing_local[0],
- &timing_local[1],
- mode);
- else if (pmif->kind == controller_sh_ata6)
- ret = set_timings_udma_shasta( &timing_local[0],
- &timing_local[1],
- mode);
- else
- ret = set_timings_udma_ata4(&timing_local[0], mode);
- if (ret)
- return 0;
-
- /* Set feature on drive */
- printk(KERN_INFO "%s: Enabling Ultra DMA %d\n", drive->name, mode & 0x0f);
- ret = pmac_ide_do_setfeature(drive, mode);
- if (ret) {
- printk(KERN_WARNING "%s: Failed !\n", drive->name);
- return 0;
- }
-
- /* Apply timings to controller */
- *timings = timing_local[0];
- *timings2 = timing_local[1];
-
- /* Set speed info in drive */
- drive->current_speed = mode;
- if (!drive->init_speed)
- drive->init_speed = mode;
-
- return 1;
-}
-
-/*
- * Check what is the best DMA timing setting for the drive and
- * call appropriate functions to apply it.
- */
-static int
-pmac_ide_dma_check(ide_drive_t *drive)
-{
- struct hd_driveid *id = drive->id;
- ide_hwif_t *hwif = HWIF(drive);
- pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)hwif->hwif_data;
- int enable = 1;
- int map;
- drive->using_dma = 0;
-
- if (drive->media == ide_floppy)
- enable = 0;
- if (((id->capability & 1) == 0) && !__ide_dma_good_drive(drive))
- enable = 0;
- if (__ide_dma_bad_drive(drive))
- enable = 0;
-
- if (enable) {
- short mode;
-
- map = XFER_MWDMA;
- if (pmif->kind == controller_kl_ata4
- || pmif->kind == controller_un_ata6
- || pmif->kind == controller_k2_ata6
- || pmif->kind == controller_sh_ata6) {
- map |= XFER_UDMA;
- if (pmif->cable_80) {
- map |= XFER_UDMA_66;
- if (pmif->kind == controller_un_ata6 ||
- pmif->kind == controller_k2_ata6 ||
- pmif->kind == controller_sh_ata6)
- map |= XFER_UDMA_100;
- if (pmif->kind == controller_sh_ata6)
- map |= XFER_UDMA_133;
- }
- }
- mode = ide_find_best_mode(drive, map);
- if (mode & XFER_UDMA)
- drive->using_dma = pmac_ide_udma_enable(drive, mode);
- else if (mode & XFER_MWDMA)
- drive->using_dma = pmac_ide_mdma_enable(drive, mode);
- hwif->OUTB(0, IDE_CONTROL_REG);
- /* Apply settings to controller */
- pmac_ide_do_update_timings(drive);
- }
- return 0;
-}
-
-/*
* Prepare a DMA transfer. We build the DMA table, adjust the timings for
* a read on KeyLargo ATA/66 and mark us as waiting for DMA completion
*/
return 1;
}
-static int
-pmac_ide_dma_host_off (ide_drive_t *drive)
+static void pmac_ide_dma_host_set(ide_drive_t *drive, int on)
{
- return 0;
}
-static int
-pmac_ide_dma_host_on (ide_drive_t *drive)
-{
- return 0;
-}
-
-static int
-pmac_ide_dma_lostirq (ide_drive_t *drive)
+static void
+pmac_ide_dma_lost_irq (ide_drive_t *drive)
{
pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)HWIF(drive)->hwif_data;
volatile struct dbdma_regs __iomem *dma;
unsigned long status;
if (pmif == NULL)
- return 0;
+ return;
dma = pmif->dma_regs;
status = readl(&dma->status);
printk(KERN_ERR "ide-pmac lost interrupt, dma status: %lx\n", status);
- return 0;
}
/*
* Allocate the data structures needed for using DMA with an interface
* and fill the proper list of functions pointers
*/
-static void __init
-pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif)
+static int __devinit pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif)
{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+
/* We won't need pci_dev if we switch to generic consistent
* DMA routines ...
*/
- if (hwif->pci_dev == NULL)
- return;
+ if (dev == NULL)
+ return -ENODEV;
/*
* Allocate space for the DBDMA commands.
* The +2 is +1 for the stop command and +1 to allow for
* aligning the start address to a multiple of 16 bytes.
*/
pmif->dma_table_cpu = (struct dbdma_cmd*)pci_alloc_consistent(
- hwif->pci_dev,
+ dev,
(MAX_DCMDS + 2) * sizeof(struct dbdma_cmd),
&hwif->dmatable_dma);
if (pmif->dma_table_cpu == NULL) {
printk(KERN_ERR "%s: unable to allocate DMA command list\n",
hwif->name);
- return;
+ return -ENOMEM;
}
- hwif->ide_dma_off_quietly = &__ide_dma_off_quietly;
- hwif->ide_dma_on = &__ide_dma_on;
- hwif->ide_dma_check = &pmac_ide_dma_check;
+ hwif->sg_max_nents = MAX_DCMDS;
+
+ hwif->dma_host_set = &pmac_ide_dma_host_set;
hwif->dma_setup = &pmac_ide_dma_setup;
hwif->dma_exec_cmd = &pmac_ide_dma_exec_cmd;
hwif->dma_start = &pmac_ide_dma_start;
hwif->ide_dma_end = &pmac_ide_dma_end;
hwif->ide_dma_test_irq = &pmac_ide_dma_test_irq;
- hwif->ide_dma_host_off = &pmac_ide_dma_host_off;
- hwif->ide_dma_host_on = &pmac_ide_dma_host_on;
- hwif->ide_dma_timeout = &__ide_dma_timeout;
- hwif->ide_dma_lostirq = &pmac_ide_dma_lostirq;
+ hwif->dma_timeout = &ide_dma_timeout;
+ hwif->dma_lost_irq = &pmac_ide_dma_lost_irq;
- hwif->atapi_dma = 1;
- switch(pmif->kind) {
- case controller_sh_ata6:
- hwif->ultra_mask = pmif->cable_80 ? 0x7f : 0x07;
- hwif->mwdma_mask = 0x07;
- hwif->swdma_mask = 0x00;
- break;
- case controller_un_ata6:
- case controller_k2_ata6:
- hwif->ultra_mask = pmif->cable_80 ? 0x3f : 0x07;
- hwif->mwdma_mask = 0x07;
- hwif->swdma_mask = 0x00;
- break;
- case controller_kl_ata4:
- hwif->ultra_mask = pmif->cable_80 ? 0x1f : 0x07;
- hwif->mwdma_mask = 0x07;
- hwif->swdma_mask = 0x00;
- break;
- default:
- hwif->ultra_mask = 0x00;
- hwif->mwdma_mask = 0x07;
- hwif->swdma_mask = 0x00;
- break;
- }
+ return 0;
}
#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
+
+module_init(pmac_ide_probe);
+
+MODULE_LICENSE("GPL");