/*
- * linux/drivers/ide/ppc/pmac.c
- *
* Support for IDE interfaces on PowerMacs.
+ *
* These IDE interfaces are memory-mapped and have a DBDMA channel
* for doing DMA.
*
} pmac_ide_hwif_t;
static pmac_ide_hwif_t pmac_ide[MAX_HWIFS];
-static int pmac_ide_count;
enum {
controller_ohare, /* OHare based */
*/
#define IDE_WAKEUP_DELAY (1*HZ)
-static void pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif);
+static int pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif);
static int pmac_ide_build_dmatable(ide_drive_t *drive, struct request *rq);
static void pmac_ide_selectproc(ide_drive_t *drive);
static void pmac_ide_kauai_selectproc(ide_drive_t *drive);
#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
-/*
- * N.B. this can't be an initfunc, because the media-bay task can
- * call ide_[un]register at any time.
- */
-void
-pmac_ide_init_hwif_ports(hw_regs_t *hw,
- unsigned long data_port, unsigned long ctrl_port,
- int *irq)
-{
- int i, ix;
-
- if (data_port == 0)
- return;
-
- for (ix = 0; ix < MAX_HWIFS; ++ix)
- if (data_port == pmac_ide[ix].regbase)
- break;
-
- if (ix >= MAX_HWIFS) {
- /* Probably a PCI interface... */
- for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; ++i)
- hw->io_ports[i] = data_port + i - IDE_DATA_OFFSET;
- hw->io_ports[IDE_CONTROL_OFFSET] = ctrl_port;
- return;
- }
-
- for (i = 0; i < 8; ++i)
- hw->io_ports[i] = data_port + i * 0x10;
- hw->io_ports[8] = data_port + 0x160;
-
- if (irq != NULL)
- *irq = pmac_ide[ix].irq;
-
- hw->dev = &pmac_ide[ix].mdev->ofdev.dev;
-}
-
-#define PMAC_IDE_REG(x) ((void __iomem *)(IDE_DATA_REG+(x)))
+#define PMAC_IDE_REG(x) \
+ ((void __iomem *)((drive)->hwif->io_ports[IDE_DATA_OFFSET] + (x)))
/*
* Apply the timings of the proper unit (master/slave) to the shared
}
/*
- * Send the SET_FEATURE IDE command to the drive and update drive->id with
- * the new state. We currently don't use the generic routine as it used to
- * cause various trouble, especially with older mediabays.
- * This code is sometimes triggering a spurrious interrupt though, I need
- * to sort that out sooner or later and see if I can finally get the
- * common version to work properly in all cases
- */
-static int
-pmac_ide_do_setfeature(ide_drive_t *drive, u8 command)
-{
- ide_hwif_t *hwif = HWIF(drive);
- int result;
- u8 stat;
-
- disable_irq_nosync(hwif->irq);
- udelay(1);
- SELECT_DRIVE(drive);
- SELECT_MASK(drive, 0);
- udelay(1);
- hwif->OUTB(drive->ctl | 2, IDE_CONTROL_REG);
- hwif->OUTB(command, IDE_NSECTOR_REG);
- hwif->OUTB(SETFEATURES_XFER, IDE_FEATURE_REG);
- hwif->OUTBSYNC(drive, WIN_SETFEATURES, IDE_COMMAND_REG);
- result = __ide_wait_stat(drive, drive->ready_stat,
- BUSY_STAT|DRQ_STAT|ERR_STAT,
- WAIT_CMD, &stat);
- hwif->OUTB(drive->ctl, IDE_CONTROL_REG);
- if (result)
- printk(KERN_ERR "%s: pmac_ide_do_setfeature disk not ready "
- "after SET_FEATURE !\n", drive->name);
-
- SELECT_MASK(drive, 0);
- if (result == 0) {
- drive->id->dma_ultra &= ~0xFF00;
- drive->id->dma_mword &= ~0x0F00;
- drive->id->dma_1word &= ~0x0F00;
- switch(command) {
- case XFER_UDMA_7:
- drive->id->dma_ultra |= 0x8080; break;
- case XFER_UDMA_6:
- drive->id->dma_ultra |= 0x4040; break;
- case XFER_UDMA_5:
- drive->id->dma_ultra |= 0x2020; break;
- case XFER_UDMA_4:
- drive->id->dma_ultra |= 0x1010; break;
- case XFER_UDMA_3:
- drive->id->dma_ultra |= 0x0808; break;
- case XFER_UDMA_2:
- drive->id->dma_ultra |= 0x0404; break;
- case XFER_UDMA_1:
- drive->id->dma_ultra |= 0x0202; break;
- case XFER_UDMA_0:
- drive->id->dma_ultra |= 0x0101; break;
- case XFER_MW_DMA_2:
- drive->id->dma_mword |= 0x0404; break;
- case XFER_MW_DMA_1:
- drive->id->dma_mword |= 0x0202; break;
- case XFER_MW_DMA_0:
- drive->id->dma_mword |= 0x0101; break;
- case XFER_SW_DMA_2:
- drive->id->dma_1word |= 0x0404; break;
- case XFER_SW_DMA_1:
- drive->id->dma_1word |= 0x0202; break;
- case XFER_SW_DMA_0:
- drive->id->dma_1word |= 0x0101; break;
- default: break;
- }
- if (!drive->init_speed)
- drive->init_speed = command;
- drive->current_speed = command;
- }
- enable_irq(hwif->irq);
- return result;
-}
-
-/*
* Old tuning functions (called on hdparm -p), sets up drive PIO timings
*/
static void
pmac_ide_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- u32 *timings;
+ u32 *timings, t;
unsigned accessTicks, recTicks;
unsigned accessTime, recTime;
pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)HWIF(drive)->hwif_data;
/* which drive is it ? */
timings = &pmif->timings[drive->select.b.unit & 0x01];
+ t = *timings;
cycle_time = ide_pio_cycle_time(drive, pio);
case controller_sh_ata6: {
/* 133Mhz cell */
u32 tr = kauai_lookup_timing(shasta_pio_timings, cycle_time);
- *timings = ((*timings) & ~TR_133_PIOREG_PIO_MASK) | tr;
+ t = (t & ~TR_133_PIOREG_PIO_MASK) | tr;
break;
}
case controller_un_ata6:
case controller_k2_ata6: {
/* 100Mhz cell */
u32 tr = kauai_lookup_timing(kauai_pio_timings, cycle_time);
- *timings = ((*timings) & ~TR_100_PIOREG_PIO_MASK) | tr;
+ t = (t & ~TR_100_PIOREG_PIO_MASK) | tr;
break;
}
case controller_kl_ata4:
accessTicks = min(accessTicks, 0x1fU);
recTicks = SYSCLK_TICKS_66(recTime);
recTicks = min(recTicks, 0x1fU);
- *timings = ((*timings) & ~TR_66_PIO_MASK) |
- (accessTicks << TR_66_PIO_ACCESS_SHIFT) |
- (recTicks << TR_66_PIO_RECOVERY_SHIFT);
+ t = (t & ~TR_66_PIO_MASK) |
+ (accessTicks << TR_66_PIO_ACCESS_SHIFT) |
+ (recTicks << TR_66_PIO_RECOVERY_SHIFT);
break;
default: {
/* 33Mhz cell */
recTicks--; /* guess, but it's only for PIO0, so... */
ebit = 1;
}
- *timings = ((*timings) & ~TR_33_PIO_MASK) |
+ t = (t & ~TR_33_PIO_MASK) |
(accessTicks << TR_33_PIO_ACCESS_SHIFT) |
(recTicks << TR_33_PIO_RECOVERY_SHIFT);
if (ebit)
- *timings |= TR_33_PIO_E;
+ t |= TR_33_PIO_E;
break;
}
}
drive->name, pio, *timings);
#endif
- if (pmac_ide_do_setfeature(drive, XFER_PIO_0 + pio))
- return;
-
+ *timings = t;
pmac_ide_do_update_timings(drive);
}
}
#endif /* #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC */
-/*
- * Speedproc. This function is called by the core to set any of the standard
- * DMA timing (MDMA or UDMA) to both the drive and the controller.
- */
-static int pmac_ide_tune_chipset(ide_drive_t *drive, const u8 speed)
+static void pmac_ide_set_dma_mode(ide_drive_t *drive, const u8 speed)
{
int unit = (drive->select.b.unit & 0x01);
int ret = 0;
tl[0] = *timings;
tl[1] = *timings2;
- switch(speed) {
#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
- case XFER_UDMA_6:
- case XFER_UDMA_5:
- case XFER_UDMA_4:
- case XFER_UDMA_3:
- case XFER_UDMA_2:
- case XFER_UDMA_1:
- case XFER_UDMA_0:
- if (pmif->kind == controller_kl_ata4)
- ret = set_timings_udma_ata4(&tl[0], speed);
- else if (pmif->kind == controller_un_ata6
- || pmif->kind == controller_k2_ata6)
- ret = set_timings_udma_ata6(&tl[0], &tl[1], speed);
- else if (pmif->kind == controller_sh_ata6)
- ret = set_timings_udma_shasta(&tl[0], &tl[1], speed);
- else
- ret = 1;
- break;
- case XFER_MW_DMA_2:
- case XFER_MW_DMA_1:
- case XFER_MW_DMA_0:
- set_timings_mdma(drive, pmif->kind, &tl[0], &tl[1], speed);
- break;
- case XFER_SW_DMA_2:
- case XFER_SW_DMA_1:
- case XFER_SW_DMA_0:
- return 1;
+ if (speed >= XFER_UDMA_0) {
+ if (pmif->kind == controller_kl_ata4)
+ ret = set_timings_udma_ata4(&tl[0], speed);
+ else if (pmif->kind == controller_un_ata6
+ || pmif->kind == controller_k2_ata6)
+ ret = set_timings_udma_ata6(&tl[0], &tl[1], speed);
+ else if (pmif->kind == controller_sh_ata6)
+ ret = set_timings_udma_shasta(&tl[0], &tl[1], speed);
+ else
+ ret = -1;
+ } else
+ set_timings_mdma(drive, pmif->kind, &tl[0], &tl[1], speed);
#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
- default:
- ret = 1;
- }
if (ret)
- return ret;
-
- ret = pmac_ide_do_setfeature(drive, speed);
- if (ret)
- return ret;
+ return;
/* Apply timings to controller */
*timings = tl[0];
*timings2 = tl[1];
pmac_ide_do_update_timings(drive);
-
- return 0;
}
/*
pmif->timings[2] = pmif->timings[3] = value2;
}
-unsigned long
-pmac_ide_get_base(int index)
-{
- return pmac_ide[index].regbase;
-}
-
-int
-pmac_ide_check_base(unsigned long base)
-{
- int ix;
-
- for (ix = 0; ix < MAX_HWIFS; ++ix)
- if (base == pmac_ide[ix].regbase)
- return ix;
- return -1;
-}
-
-int
-pmac_ide_get_irq(unsigned long base)
-{
- int ix;
-
- for (ix = 0; ix < MAX_HWIFS; ++ix)
- if (base == pmac_ide[ix].regbase)
- return pmac_ide[ix].irq;
- return 0;
-}
-
-static int ide_majors[] = { 3, 22, 33, 34, 56, 57 };
-
-dev_t __init
-pmac_find_ide_boot(char *bootdevice, int n)
-{
- int i;
-
- /*
- * Look through the list of IDE interfaces for this one.
- */
- for (i = 0; i < pmac_ide_count; ++i) {
- char *name;
- if (!pmac_ide[i].node || !pmac_ide[i].node->full_name)
- continue;
- name = pmac_ide[i].node->full_name;
- if (memcmp(name, bootdevice, n) == 0 && name[n] == 0) {
- /* XXX should cope with the 2nd drive as well... */
- return MKDEV(ide_majors[i], 0);
- }
- }
-
- return 0;
-}
-
/* Suspend call back, should be called after the child devices
* have actually been suspended
*/
return 0;
}
+static const struct ide_port_info pmac_port_info = {
+ .chipset = ide_pmac,
+ .host_flags = IDE_HFLAG_SET_PIO_MODE_KEEP_DMA |
+ IDE_HFLAG_PIO_NO_DOWNGRADE |
+ IDE_HFLAG_POST_SET_MODE |
+ IDE_HFLAG_NO_DMA | /* no SFF-style DMA */
+ IDE_HFLAG_UNMASK_IRQS,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+};
+
/*
* Setup, register & probe an IDE channel driven by this driver, this is
* called by one of the 2 probe functions (macio or PCI). Note that a channel
* (it is kept in 2.4). This introduce an interface numbering change on some
* rare machines unfortunately, but it's better this way.
*/
-static int
-pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif)
+static int __devinit
+pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw)
{
struct device_node *np = pmif->node;
const int *bidp;
+ u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
+ struct ide_port_info d = pmac_port_info;
pmif->cable_80 = 0;
pmif->broken_dma = pmif->broken_dma_warn = 0;
- if (of_device_is_compatible(np, "shasta-ata"))
+ if (of_device_is_compatible(np, "shasta-ata")) {
pmif->kind = controller_sh_ata6;
- else if (of_device_is_compatible(np, "kauai-ata"))
+ d.udma_mask = ATA_UDMA6;
+ } else if (of_device_is_compatible(np, "kauai-ata")) {
pmif->kind = controller_un_ata6;
- else if (of_device_is_compatible(np, "K2-UATA"))
+ d.udma_mask = ATA_UDMA5;
+ } else if (of_device_is_compatible(np, "K2-UATA")) {
pmif->kind = controller_k2_ata6;
- else if (of_device_is_compatible(np, "keylargo-ata")) {
- if (strcmp(np->name, "ata-4") == 0)
+ d.udma_mask = ATA_UDMA5;
+ } else if (of_device_is_compatible(np, "keylargo-ata")) {
+ if (strcmp(np->name, "ata-4") == 0) {
pmif->kind = controller_kl_ata4;
- else
+ d.udma_mask = ATA_UDMA4;
+ } else
pmif->kind = controller_kl_ata3;
- } else if (of_device_is_compatible(np, "heathrow-ata"))
+ } else if (of_device_is_compatible(np, "heathrow-ata")) {
pmif->kind = controller_heathrow;
- else {
+ } else {
pmif->kind = controller_ohare;
pmif->broken_dma = 1;
}
if (np->parent && np->parent->name
&& strcasecmp(np->parent->name, "media-bay") == 0) {
#ifdef CONFIG_PMAC_MEDIABAY
- media_bay_set_ide_infos(np->parent, pmif->regbase, pmif->irq, hwif->index);
+ media_bay_set_ide_infos(np->parent, pmif->regbase, pmif->irq,
+ hwif);
#endif /* CONFIG_PMAC_MEDIABAY */
pmif->mediabay = 1;
if (!bidp)
/* Tell common code _not_ to mess with resources */
hwif->mmio = 1;
hwif->hwif_data = pmif;
- pmac_ide_init_hwif_ports(&hwif->hw, pmif->regbase, 0, &hwif->irq);
- memcpy(hwif->io_ports, hwif->hw.io_ports, sizeof(hwif->io_ports));
- hwif->chipset = ide_pmac;
- hwif->noprobe = !hwif->io_ports[IDE_DATA_OFFSET] || pmif->mediabay;
- hwif->hold = pmif->mediabay;
+ ide_init_port_hw(hwif, hw);
+ hwif->noprobe = pmif->mediabay;
hwif->cbl = pmif->cable_80 ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
- hwif->drives[0].unmask = 1;
- hwif->drives[1].unmask = 1;
- hwif->pio_mask = ATA_PIO4;
hwif->set_pio_mode = pmac_ide_set_pio_mode;
if (pmif->kind == controller_un_ata6
|| pmif->kind == controller_k2_ata6
hwif->selectproc = pmac_ide_kauai_selectproc;
else
hwif->selectproc = pmac_ide_selectproc;
- hwif->speedproc = pmac_ide_tune_chipset;
+ hwif->set_dma_mode = pmac_ide_set_dma_mode;
printk(KERN_INFO "ide%d: Found Apple %s controller, bus ID %d%s, irq %d\n",
hwif->index, model_name[pmif->kind], pmif->aapl_bus_id,
hwif->noprobe = 0;
#endif /* CONFIG_PMAC_MEDIABAY */
- hwif->sg_max_nents = MAX_DCMDS;
-
#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
+ if (pmif->cable_80 == 0)
+ d.udma_mask &= ATA_UDMA2;
/* has a DBDMA controller channel */
- if (pmif->dma_regs)
- pmac_ide_setup_dma(pmif, hwif);
-#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
+ if (pmif->dma_regs == 0 || pmac_ide_setup_dma(pmif, hwif) < 0)
+#endif
+ d.udma_mask = d.mwdma_mask = 0;
- /* We probe the hwif now */
- probe_hwif_init(hwif);
+ idx[0] = hwif->index;
- ide_proc_register_port(hwif);
+ ide_device_add(idx, &d);
return 0;
}
+static void __devinit pmac_ide_init_ports(hw_regs_t *hw, unsigned long base)
+{
+ int i;
+
+ for (i = 0; i < 8; ++i)
+ hw->io_ports[i] = base + i * 0x10;
+ hw->io_ports[8] = base + 0x160;
+}
+
/*
* Attach to a macio probed interface
*/
ide_hwif_t *hwif;
pmac_ide_hwif_t *pmif;
int i, rc;
+ hw_regs_t hw;
i = 0;
while (i < MAX_HWIFS && (ide_hwifs[i].io_ports[IDE_DATA_OFFSET] != 0
base = ioremap(macio_resource_start(mdev, 0), 0x400);
regbase = (unsigned long) base;
- hwif->pci_dev = mdev->bus->pdev;
- hwif->gendev.parent = &mdev->ofdev.dev;
+ hwif->dev = &mdev->bus->pdev->dev;
pmif->mdev = mdev;
pmif->node = mdev->ofdev.node;
#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
dev_set_drvdata(&mdev->ofdev.dev, hwif);
- rc = pmac_ide_setup_device(pmif, hwif);
+ memset(&hw, 0, sizeof(hw));
+ pmac_ide_init_ports(&hw, pmif->regbase);
+ hw.irq = irq;
+ hw.dev = &mdev->ofdev.dev;
+
+ rc = pmac_ide_setup_device(pmif, hwif, &hw);
if (rc != 0) {
/* The inteface is released to the common IDE layer */
dev_set_drvdata(&mdev->ofdev.dev, NULL);
iounmap(base);
- if (pmif->dma_regs)
+ if (pmif->dma_regs) {
iounmap(pmif->dma_regs);
+ macio_release_resource(mdev, 1);
+ }
memset(pmif, 0, sizeof(*pmif));
macio_release_resource(mdev, 0);
- if (pmif->dma_regs)
- macio_release_resource(mdev, 1);
}
return rc;
int rc = 0;
if (mesg.event != mdev->ofdev.dev.power.power_state.event
- && mesg.event == PM_EVENT_SUSPEND) {
+ && (mesg.event & PM_EVENT_SLEEP)) {
rc = pmac_ide_do_suspend(hwif);
if (rc == 0)
mdev->ofdev.dev.power.power_state = mesg;
void __iomem *base;
unsigned long rbase, rlen;
int i, rc;
+ hw_regs_t hw;
np = pci_device_to_OF_node(pdev);
if (np == NULL) {
return -ENXIO;
}
- hwif->pci_dev = pdev;
- hwif->gendev.parent = &pdev->dev;
+ hwif->dev = &pdev->dev;
pmif->mdev = NULL;
pmif->node = np;
pci_set_drvdata(pdev, hwif);
- rc = pmac_ide_setup_device(pmif, hwif);
+ memset(&hw, 0, sizeof(hw));
+ pmac_ide_init_ports(&hw, pmif->regbase);
+ hw.irq = pdev->irq;
+ hw.dev = &pdev->dev;
+
+ rc = pmac_ide_setup_device(pmif, hwif, &hw);
if (rc != 0) {
/* The inteface is released to the common IDE layer */
pci_set_drvdata(pdev, NULL);
int rc = 0;
if (mesg.event != pdev->dev.power.power_state.event
- && mesg.event == PM_EVENT_SUSPEND) {
+ && (mesg.event & PM_EVENT_SLEEP)) {
rc = pmac_ide_do_suspend(hwif);
if (rc == 0)
pdev->dev.power.power_state = mesg;
.resume = pmac_ide_macio_resume,
};
-static struct pci_device_id pmac_ide_pci_match[] = {
- { PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_UNI_N_ATA,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- { PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_IPID_ATA100,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- { PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_K2_ATA100,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- { PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_SH_ATA,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- { PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_IPID2_ATA,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+static const struct pci_device_id pmac_ide_pci_match[] = {
+ { PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_UNI_N_ATA), 0 },
+ { PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_IPID_ATA100), 0 },
+ { PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_K2_ATA100), 0 },
+ { PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_SH_ATA), 0 },
+ { PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_IPID2_ATA), 0 },
{},
};
if (pmif->broken_dma && cur_addr & (L1_CACHE_BYTES - 1)) {
if (pmif->broken_dma_warn == 0) {
- printk(KERN_WARNING "%s: DMA on non aligned address,"
+ printk(KERN_WARNING "%s: DMA on non aligned address, "
"switching to PIO on Ohare chipset\n", drive->name);
pmif->broken_dma_warn = 1;
}
cur_len -= tc;
++table;
}
- sg++;
+ sg = sg_next(sg);
i--;
}
}
printk(KERN_DEBUG "%s: empty DMA table?\n", drive->name);
- use_pio_instead:
- pci_unmap_sg(hwif->pci_dev,
- hwif->sg_table,
- hwif->sg_nents,
- hwif->sg_dma_direction);
+
+use_pio_instead:
+ ide_destroy_dmatable(drive);
+
return 0; /* revert to PIO for this request */
}
pmac_ide_destroy_dmatable (ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
- struct pci_dev *dev = HWIF(drive)->pci_dev;
- struct scatterlist *sg = hwif->sg_table;
- int nents = hwif->sg_nents;
- if (nents) {
- pci_unmap_sg(dev, sg, nents, hwif->sg_dma_direction);
+ if (hwif->sg_nents) {
+ ide_destroy_dmatable(drive);
hwif->sg_nents = 0;
}
}
/*
- * Check what is the best DMA timing setting for the drive and
- * call appropriate functions to apply it.
- */
-static int
-pmac_ide_dma_check(ide_drive_t *drive)
-{
- int enable = 1;
-
- drive->using_dma = 0;
-
- if (drive->media == ide_floppy)
- enable = 0;
- if ((drive->id->capability & 1) == 0 && !__ide_dma_good_drive(drive))
- enable = 0;
- if (__ide_dma_bad_drive(drive))
- enable = 0;
-
- if (enable) {
- u8 mode = ide_max_dma_mode(drive);
-
- if (mode && pmac_ide_tune_chipset(drive, mode) == 0)
- drive->using_dma = 1;
- }
- return 0;
-}
-
-/*
* Prepare a DMA transfer. We build the DMA table, adjust the timings for
* a read on KeyLargo ATA/66 and mark us as waiting for DMA completion
*/
return 1;
}
-static void pmac_ide_dma_host_off(ide_drive_t *drive)
-{
-}
-
-static void pmac_ide_dma_host_on(ide_drive_t *drive)
+static void pmac_ide_dma_host_set(ide_drive_t *drive, int on)
{
}
* Allocate the data structures needed for using DMA with an interface
* and fill the proper list of functions pointers
*/
-static void __init
-pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif)
+static int __devinit pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif)
{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+
/* We won't need pci_dev if we switch to generic consistent
* DMA routines ...
*/
- if (hwif->pci_dev == NULL)
- return;
+ if (dev == NULL)
+ return -ENODEV;
/*
* Allocate space for the DBDMA commands.
* The +2 is +1 for the stop command and +1 to allow for
* aligning the start address to a multiple of 16 bytes.
*/
pmif->dma_table_cpu = (struct dbdma_cmd*)pci_alloc_consistent(
- hwif->pci_dev,
+ dev,
(MAX_DCMDS + 2) * sizeof(struct dbdma_cmd),
&hwif->dmatable_dma);
if (pmif->dma_table_cpu == NULL) {
printk(KERN_ERR "%s: unable to allocate DMA command list\n",
hwif->name);
- return;
+ return -ENOMEM;
}
- hwif->dma_off_quietly = &ide_dma_off_quietly;
- hwif->ide_dma_on = &__ide_dma_on;
- hwif->ide_dma_check = &pmac_ide_dma_check;
+ hwif->sg_max_nents = MAX_DCMDS;
+
+ hwif->dma_host_set = &pmac_ide_dma_host_set;
hwif->dma_setup = &pmac_ide_dma_setup;
hwif->dma_exec_cmd = &pmac_ide_dma_exec_cmd;
hwif->dma_start = &pmac_ide_dma_start;
hwif->ide_dma_end = &pmac_ide_dma_end;
hwif->ide_dma_test_irq = &pmac_ide_dma_test_irq;
- hwif->dma_host_off = &pmac_ide_dma_host_off;
- hwif->dma_host_on = &pmac_ide_dma_host_on;
hwif->dma_timeout = &ide_dma_timeout;
hwif->dma_lost_irq = &pmac_ide_dma_lost_irq;
- hwif->atapi_dma = 1;
- switch(pmif->kind) {
- case controller_sh_ata6:
- hwif->ultra_mask = pmif->cable_80 ? 0x7f : 0x07;
- hwif->mwdma_mask = 0x07;
- hwif->swdma_mask = 0x00;
- break;
- case controller_un_ata6:
- case controller_k2_ata6:
- hwif->ultra_mask = pmif->cable_80 ? 0x3f : 0x07;
- hwif->mwdma_mask = 0x07;
- hwif->swdma_mask = 0x00;
- break;
- case controller_kl_ata4:
- hwif->ultra_mask = pmif->cable_80 ? 0x1f : 0x07;
- hwif->mwdma_mask = 0x07;
- hwif->swdma_mask = 0x00;
- break;
- default:
- hwif->ultra_mask = 0x00;
- hwif->mwdma_mask = 0x07;
- hwif->swdma_mask = 0x00;
- break;
- }
+ return 0;
}
#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
+
+module_init(pmac_ide_probe);
+
+MODULE_LICENSE("GPL");
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff