siimage: convert to use ->host_priv

[safe/jmp/linux-2.6] / drivers / ide / pci / triflex.c

diff --git a/drivers/ide/pci/triflex.c b/drivers/ide/pci/triflex.c
index 68e1e9a..60dcb64 100644 (file)
--- a/drivers/ide/pci/triflex.c
+++ b/drivers/ide/pci/triflex.c
@@ -1,6 +1,4 @@
 /*
- * triflex.c
- * 
  * IDE Chipset driver for the Compaq TriFlex IDE controller.
  * 
  * Known to work with the Compaq Workstation 5x00 series.
@@ -30,11 +28,6 @@
 #include <linux/types.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
 #include <linux/hdreg.h>
 #include <linux/pci.h>
 #include <linux/ide.h>
@@ -43,7 +36,7 @@
 static void triflex_set_mode(ide_drive_t *drive, const u8 speed)
 {
        ide_hwif_t *hwif = HWIF(drive);
-       struct pci_dev *dev = hwif->pci_dev;
+       struct pci_dev *dev = to_pci_dev(hwif->dev);
        u8 channel_offset = hwif->channel ? 0x74 : 0x70;
        u16 timing = 0;
        u32 triflex_timings = 0;
@@ -81,8 +74,6 @@ static void triflex_set_mode(ide_drive_t *drive, const u8 speed)
                case XFER_PIO_0:
                        timing = 0x0808;
                        break;
-               default:
-                       return;
        }
 
        triflex_timings &= ~(0xFFFF << (16 * unit));
@@ -96,31 +87,24 @@ static void triflex_set_pio_mode(ide_drive_t *drive, const u8 pio)
        triflex_set_mode(drive, XFER_PIO_0 + pio);
 }
 
-static void __devinit init_hwif_triflex(ide_hwif_t *hwif)
-{
-       hwif->set_pio_mode = &triflex_set_pio_mode;
-       hwif->set_dma_mode = &triflex_set_mode;
-
-       if (hwif->dma_base == 0)
-               return;
-
-       hwif->mwdma_mask = 0x07;
-       hwif->swdma_mask = 0x07;
-}
+static const struct ide_port_ops triflex_port_ops = {
+       .set_pio_mode           = triflex_set_pio_mode,
+       .set_dma_mode           = triflex_set_mode,
+};
 
-static ide_pci_device_t triflex_device __devinitdata = {
+static const struct ide_port_info triflex_device __devinitdata = {
        .name           = "TRIFLEX",
-       .init_hwif      = init_hwif_triflex,
-       .autodma        = AUTODMA,
        .enablebits     = {{0x80, 0x01, 0x01}, {0x80, 0x02, 0x02}},
-       .bootable       = ON_BOARD,
+       .port_ops       = &triflex_port_ops,
        .pio_mask       = ATA_PIO4,
+       .swdma_mask     = ATA_SWDMA2,
+       .mwdma_mask     = ATA_MWDMA2,
 };
 
 static int __devinit triflex_init_one(struct pci_dev *dev, 
                const struct pci_device_id *id)
 {
-       return ide_setup_pci_device(dev, &triflex_device);
+       return ide_pci_init_one(dev, &triflex_device, NULL);
 }
 
 static const struct pci_device_id triflex_pci_tbl[] = {